Rat Mesenchymal Stem Cells Research Articles

Mimicking Osteoid 3D Porous Dense Microfiber Silk Fibroin Embedded Poly(vinyl alcohol) Scaffold for Alveolar Ridge Preservation

Abstract Alveolar ridge loss presents difficulties for implant placement and stability. To address this, alveolar ridge preservation (ARP) is required to maintain bone and avoid the need for ridge augmentation using socket grafting. In this study, a scaffold for ARP was created by fabricating a 3D porous dense microfiber silk fibroin (mSF) embedded in poly(vinyl alcohol) (PVA), which mimics the osteoid template. The research utilized a freeze-thawing technique to create a mimicked osteoid 3D porous scaffold by incorporating different amounts of mSF into the PVA, namely, 1%, 3%, 5%, and 7%. Subsequently, a 3D profilometer machine and a scanning electron microscope (SEM) were employed to examine the morphology and size of the mSF and the mimicked osteoid 3D porous scaffold in all groups. Thermal characteristics and crystalline structure were analyzed before assessing the water contact angle, swelling behavior, degradation, and mechanical properties. The experiment evaluated the biological performance of the mimicked osteoid 3D porous scaffold by examining the efficacy of osteoblast cell adhesion, proliferation, viability, protein synthesis, alkaline phosphatase (ALP) activity, and calcium synthesis. Finally, the ability of osteoblast cells to regulate the osteoid matrix deposition on the osteoid 3D porous scaffold was assessed by mimicking the dynamic bone environment using rat mesenchymal stem cells (RMSC). The findings suggest that incorporating mSF into PVA enhances the interconnective pore size, crystalline structure, and thermal behavior of the mimicked osteoid 3D porous scaffold. The hydrophilicity of PVA decreased with an increase in the proportion of mSF, while a higher proportion of mSF resulted in increased swelling and mechanical characteristics. Incorporating a greater proportion of mSF, specifically 5% and 7%, led to a reduced rate of degradation. The addition of 5% mSF to the PVA 3D porous scaffold resulted in remarkable biological properties and excellent osteoconductive activity.

Pretreatment with Notoginsenoside R1 enhances the efficacy of neonatal rat mesenchymal stem cell transplantation in model of myocardial infarction through regulating PI3K/Akt/FoxO1 signaling pathways

Pretreatment with Notoginsenoside R1 enhances the efficacy of neonatal rat mesenchymal stem cell transplantation in model of myocardial infarction through regulating PI3K/Akt/FoxO1 signaling pathways

Implantable 3D printed hydrogels with intrinsic channels for liver tissue engineering

This study presents the design, fabrication, and evaluation of a general platform for the creation of three-dimensional printed devices (3DPDs) for tissue engineering applications. As a demonstration, we modeled the liver with 3DPDs consisting of a pair of parallel millifluidic channels that function as portal-venous (PV) and hepatobiliary (HB) structures. Perfusion of medium or whole blood through the PV channel supports the hepatocyte-containing HB channel. Device computer-aided design was optimized for structural stability, after which 3DPDs were 3D printed in a polyethylene(glycol) diacrylate photoink by digital light processing and evaluated in vitro. The HB channels were subsequently seeded with hepatic cells suspended in a collagen hydrogel. Perfusion of 3DPDs in bioreactors enhanced the viability and function of rat hepatoma cells and were maintained over time, along with improved liver-specific functions. Similar results were observed with primary rat hepatocytes, including significant upregulation of cytochrome p450 activity. Additionally, coculture experiments involving primary rat hepatocytes, endothelial cells, and mesenchymal stem cells in 3DPDs showed enhanced viability, broad liver-specific gene expression, and histological features indicative of liver tissue architecture. In vivo implantation of 3DPDs in a rat renal shunt model demonstrated successful blood flow through the devices without clot formation and maintenance of cell viability. 3D printed designs can be scaled in 3D space, allowing for larger devices with increased cell mass. Overall, these findings highlight the potential of 3DPDs for clinical translation in hepatic support applications.

The impact of hydrogen sulfide on mesenchymal stem cells in rats suffering from liver fibrosis via suppression of TGF-β signaling

Worldwide, liver fibrosis (LF) causes complications and has an elevated death rate. The prevalence of mesenchymal stem cell therapy (MSC) is a result of the lack of liver donors. In recent years, the study of stem cell therapy has advanced into a promising and cutting-edge field of study. The purpose of this study is to assess the possible value of in vitro preconditioning of bone marrow-derived mesenchymal stem cells (BMSCs) with sodium hydrogen sulfide (NaHS), which aims to encourage rats to benefit from stem cell therapy with carbon tetrachloride-induced liver fibrosis. Materials and Methods: Fifty male albino rats (6 weeks old & 120–150 g) were divided equally into 5 groups (10 rats each); the 1st group served as a negative control, the 2nd group was a positive control, in which rats received 2 mL/kg CCl4 (1:1 corn oil) twice a week for five weeks, and the remaining three groups received, in addition to CCL4, a NaHS solution (10 μmol/kg) every 2 days for 6 weeks, one dose of BMSCs (3 × 106 cells per rat) intravenously, and a single dose of BMSCs (3 × 106 cells per rat) in culture with 200 μmol/L NaHS for 24 h. Quantitative gene expression of transforming growth factor-beta (TGF-β), Smad, collagen, α-SMA, MAPK, β-catenin, GSK-3B, and CBS was carried out using real-time polymerase chain reaction; whereas the serum levels of alanine aminotransferase (ALT), aspartate aminotransferase (AST), and albumin were estimated using colorimetric analysis. Also, the relative expression of MAPK, β-catenin, and GSK-3B by Western blot was done. Histopathological analysis was used to gauge the progression of LF. Results: The liver fibrosis group exhibited significantly increased serum ALT and AST levels, along with decreased serum albumin levels, compared to controls. Additionally, compared to controls, there was a rise in the gene expression of TGF-β, Smad, collagen, α-SMA, MAPK, β-catenin, and GSK-3B, while the gene expression of CBS is decreased. The biochemical parameters indicated above were greatly improved by BMSCs pretreated with H2S, and the liver sections produced from this group demonstrated a notable improvement in histopathology. Conclusion: The study investigated and demonstrated how NaHS affected the efficacy of BMSC therapy in rats with CCl4-induced liver fibrosis.

Development of electrospun electroactive polyurethane membranes for bone repairing.

To fabricate electroactive fibrous membranes and provide simulated bioelectric micro-environment for bone regeneration mimicking nature periosteum, a series of electroactive polyurethanes (PUAT) were synthesized using amino-capped aniline trimers (AT) and lysine derivatives as chain extenders. These PUAT were fabricated into fibrous membranes as guided bone tissue regeneration membranes (GBRMs) via electrospinning. The ultraviolet-visible (UV-vis) absorption spectroscopy and cyclic voltammetry (CV) of PUAT copolymers showed that the electroactive PUAT fibrous membranes had good electroactivity. Besides, the introduction of AT significantly improved the hydrophobicity and thermal stability of PUAT fibrous membranes and decreased the degradation rate of PUAT fibers in vitro. With the increasing content of AT incorporated into copolymers, the tensile strength and Young's modulus of PUAT fibrous membranes increased from 4MPa (PUAT0) to 15MPa (PUAT10) and from 2.1MPa (PUAT0) to 18MPa (PUAT10), respectively. The cell morphology and proliferation of rat mesenchymal stem cells (rMSCs) on PUAT fibers indicated that the incorporation of AT enhanced the cell attachment and proliferation. Moreover, the expression levels of OCN, CD31, and VEGF secreted by rMSCs on PUAT fibers increased with the increasing content of AT. In conclusion, an electroactive polyurethane fibrous membrane mimicking natural periosteum was prepared via electrospinning and showed good potential application in guiding bone tissue regeneration.

Optimizing Cardiomyocyte Differentiation: Comparative Analysis of Bone Marrow and Adipose-Derived Mesenchymal Stem Cells in Rats Using 5-Azacytidine and Low-Dose FGF and IGF Treatment.

Mesenchymal stem cells (MSCs) exhibit multipotency, self-renewal, and immune-modulatory properties, making them promising in regenerative medicine, particularly in cardiovascular treatments. However, optimizing the MSC source and induction method of cardiac differentiation is challenging. This study compares the cardiomyogenic potential of bone marrow (BM)-MSCs and adipose-derived (AD)-MSCs using 5-Azacytidine (5-Aza) alone or combined with low doses of Fibroblast Growth Factor (FGF) and Insulin-like Growth Factor (IGF). BM-MSCs and AD-MSCs were differentiated using two protocols: 10 μmol 5-Aza alone and 10 μmol 5-Aza with 1 ng/mL FGF and 10 ng/mL IGF. Morphological, transcriptional, and translational analyses, along with cell viability assessments, were performed. Both the MSC types exhibited similar morphological changes; however, AD-MSCs achieved 70-80% confluence faster than BM-MSCs. Surface marker profiling confirmed CD29 and CD90 positivity and CD45 negativity. The differentiation protocols led to cell flattening and myotube formation, with earlier differentiation in AD-MSCs. The combined protocol reduced cell mortality in BM-MSCs and enhanced the expression of cardiac markers (MEF2c, Troponin I, GSK-3β), particularly in BM-MSCs. Immunofluorescence confirmed cardiac-specific protein expression in all the treated groups. Both MSC types exhibited the expression of cardiac-specific markers indicative of cardiomyogenic differentiation, with the combined treatment showing superior efficiency for BM-MSCs.

Mesenchymal stem cells may alleviate angiotensin II-induced myocardial fibrosis and hypertrophy by upregulating SFRS3 expression

Introduction and objectivesThe development of cardiac fibrosis (CF) and hypertrophy (CH) can lead to heart failure. Mesenchymal stem cells (MSCs) have shown promise in treating cardiac diseases. However, the relationship between MSCs and splicing factor arginine/serine rich-3 (SFRS3) remains unclear. In this study, our objectives are to investigate the effect of MSCs on SFRS3 expression, and their impact on CF and CH. Additionally, we aim to explore the function of the overexpression of SFRS3 in angiotensin II (Ang II)-treated cardiac fibroblasts (CFBs) and cardiac myocytes (CMCs). MethodsRat cardiac fibroblasts (rCFBs) or rat cardiac myocytes (rCMCs) were co-cultured with rat MSCs (rMSCs). The function of SFRS3 in Ang II-induced rCFBs and rCMCs was studied by overexpressing SFRS3 in these cells, both with and without the presence of rMSCs. We assessed the expression of SFRS3 and evaluated the cell cycle, proliferation and apoptosis of rCFBs and rCMCs. We also measured the levels of interleukin (IL)-β, IL-6 and tumor necrosis factor (TNF)-α and assessed the degree of fibrosis in rCFBs and hypertrophy in rCMCs. ResultsrMSCs induced SFRS3 expression and promoted cell cycle, proliferation, while reducing apoptosis of Ang II-treated rCFBs and rCMCs. Co-culture of rMSCs with these cells also repressed cytokine production and mitigated the fibrosis of rCFBs, as well as hypertrophy of rCMCs triggered by Ang II. Overexpression of SFRS3 in the rCFBs and rCMCs yielded identical effects to rMSC co-culture. ConclusionMSCs may alleviate Ang II-induced cardiac fibrosis and cardiomyocyte hypertrophy by increasing SFRS3 expression in vitro.

Epoxidized Soybean Oleic Acid/Oligomeric Poly(lactic acid)-Grafted Nano-Hydroxyapatite and Its Role as a Filler in Poly(L-lactide) for Potential Bone Fixation Application.

One of the most effective strategies for modifying the surface properties of nano-fillers and enhancing their composite characteristics is through polymer grafting. In this study, a coprecipitation method was employed to modify hydroxyapatite (HAP) with epoxidized soybean oleic acid (ESOA), resulting in ESOA-HAP. Subsequently, oligomeric poly(lactic acid) (OPLA) was grafted onto the surface of ESOA-HAP, yielding OPLA-ESOA-HAP. HAP, ESOA-HAP, and OPLA-ESOA-HAP were comprehensively characterized. The results demonstrate the progressive grafting of ESOA and OPLA onto the surface of HAP, resulting in enhanced hydrophobicity and improved dispersity in organic solvent for OPLA-ESOA-HAP compared to HAP. The vitality and adhesion of Wistar rat mesenchymal stem cells (MSCs) were assessed using HAP and modified HAP materials. Following culture with MSCs for 72 h, the OPLA-ESOA-HAP showed an inhibition rate lower than 23.0% at a relatively high concentration (1.0 mg/mL), which is three times lower compared to HAP under similar condition. The cell number for OPLA-ESOA-HAP was 4.5 times higher compared to HAP, indicating its superior biocompatibility. Furthermore, the mechanical properties of the OPLA-ESOA-HAP/PLLA composite almost remained unaltered ever after undergoing two stages of thermal processing involving melt extrusion and inject molding. The increase in the biocompatibility and relatively high mechanical properties render OPLA-ESOA-HAP/PLLA a potential material for the biodegradable fixation system.

Toxicity of Large and Small Surface-Engineered Upconverting Nanoparticles for In Vitro and In Vivo Bioapplications.

In this study, spherical or hexagonal NaYF4:Yb,Er nanoparticles (UCNPs) with sizes of 25 nm (S-UCNPs) and 120 nm (L-UCNPs) were synthesized by high-temperature coprecipitation and subsequently modified with three kinds of polymers. These included poly(ethylene glycol) (PEG) and poly(N,N-dimethylacrylamide-co-2-aminoethylacrylamide) [P(DMA-AEA)] terminated with an alendronate anchoring group, and poly(methyl vinyl ether-co-maleic acid) (PMVEMA). The internalization of nanoparticles by rat mesenchymal stem cells (rMSCs) and C6 cancer cells (rat glial tumor cell line) was visualized by electron microscopy and the cytotoxicity of the UCNPs and their leaches was measured by the real-time proliferation assay. The comet assay was used to determine the oxidative damage of the UCNPs. An in vivo study on mice determined the elimination route and potential accumulation of UCNPs in the body. The results showed that the L- and S-UCNPs were internalized into cells in the lumen of endosomes. The proliferation assay revealed that the L-UCNPs were less toxic than S-UCNPs. The viability of rMSCs incubated with particles decreased in the order S-UCNP@Ale-(PDMA-AEA) > S-UCNP@Ale-PEG > S-UCNPs > S-UCNP@PMVEMA. Similar results were obtained in C6 cells. The oxidative damage measured by the comet assay showed that neat L-UCNPs caused more oxidative damage to rMSCs than all coated UCNPs while no difference was observed in C6 cells. An in vivo study indicated that L-UCNPs were eliminated from the body via the hepatobiliary route; L-UCNP@Ale-PEG particles were almost eliminated from the liver 96 h after intravenous application. Pilot fluorescence imaging confirmed the limited in vivo detection capabilities of the nanoparticles.

Development of new nanofibrous nerve conduits by PCL-Chitosan-Hyaluronic acid containing Piracetam-Vitamin B12 for sciatic nerve: A rat model

Peripheral nerve injury is a critical condition that can disrupt nerve functions. Despite the progress in engineering artificial nerve guidance conduits (NGCs), nerve regeneration remains challenging. Here, we developed new nanofibrous NGCs using polycaprolactone (PCL) and chitosan (CH) containing piracetam (PIR)/vitamin B12(VITB12) with an electrospinning method. The lumen of NGCs was coated by hyaluronic acid (HA) to promote regeneration in sciatic nerve injury. The NGCs were characterized via Scanning Electron Microscopy (SEM), Fourier transform infrared (FTIR), tensile, swelling, contact angle, degradation, and drug release tests. Neuronal precursor cell line (PCL12 cell) and rat mesenchymal stem cells derived from bone marrow (MSCs) were seeded on the nanofibrous conduits. After that, the biocompatibility of the NGCs was evaluated by the 2,5-diphenyl-2H-tetrazolium bromide (MTT) assay, 4′,6-diamidino-2-phenylindole (DAPI) staining, and SEM images. The SEM demonstrated that PCL/CH/PIR/VITB12 NGCs had nonaligned, interconnected, smooth fibers. The mechanical properties of these NGCs were similar to rat sciatic nerve. These conduits had an appropriate swelling and degradation rate. The In Vitro studies exhibited favorable biocompatibility of the PCL/CH/PIR/VITB12 NGCs towards PC12 cells and MSCs. The in vitro studies exhibited favorable biocompatibility of the PCL/CH/PIR/VIT B12 NGCs towards MSCs and PC12 cells. To analyze functional efficacy, NGCs were implanted into a 10 mm Wistar rat sciatic nerve gap and bridged the proximal and distal stump of the defect. After three months, the results of sciatic functional index (55.3 ± 1.8), hot plate latency test (5.6 ± 0.5 s), gastrocnemius muscle wet weight-loss (38.57 ± 1.6 %) and histopathological examination using hematoxylin-eosin (H&E) /toluidine blue/ Anti-Neurofilament (NF200) staining demonstrated that the produced conduit recovered motor and sensory functions and had comparable nerve regeneration compared to the autograft that can be as the gold standard to bridge the nerve gaps.

A highly sensitive and specific Homo1-based real-time qPCR method for quantification of human umbilical cord mesenchymal stem cells in rats.

Owing to the characteristics of easier access in vitro, low immunogenicity, and high plasticity, human umbilical cord-derived mesenchymal stem cells (UC-MSCs) are considered as a promising cell-based drugs for clinical application. No internationally recognized technology exists to evaluate the pharmacokinetics and distribution of cell-based drugs in vivo. We determined the human-specific gene sequence, Homo1, from differential fragments Homo sapiens mitochondrion and Rattus norvegicus mitochondrion. The expression of Homo1 was utilized to determine the distribution of UC-MSCs in the normal and diabetic nephropathy (DN) rats. We observed a significant correlation between the number of UC-MSCs and the expression level of Homo1. Following intravenous transplantation, the blood levels of UC-MSCs peaked at 30 min. A large amount of intravenously injected MSCs were trapped in the lungs, but the number of them decreased rapidly after 24 h. Additionally, the distribution of UC-MSCs in the kidneys of DN rats was significantly higher than that of normal rats. In this study, we establish a highly sensitive and specific Homo1-based real-time quantitative PCR method to quantify the distribution of human UC-MSCs in rats. The method provides guidelines for the safety research of cells in preclinical stages.

Magnetoactive Composite Conduits Based on Poly(3-hydroxybutyrate) and Magnetite Nanoparticles for Repair of Peripheral Nerve Injury.

Peripheral nerve injury poses a threat to the mobility and sensitivity of a nerve, thereby leading to permanent function loss due to the low regenerative capacity of mature neurons. To date, the most widely clinically applied approach to bridging nerve injuries is autologous nerve grafting, which faces challenges such as donor site morbidity, donor shortages, and the necessity of a second surgery. An effective therapeutic strategy is urgently needed worldwide to overcome the current limitations. Herein, a magnetic nerve guidance conduit (NGC) based on biocompatible biodegradable poly(3-hydroxybutyrate) (PHB) and 8 wt % of magnetite nanoparticles modified by citric acid (Fe3O4-CA) was fabricated by electrospinning. The crystalline structure of NGCs was studied by X-ray diffraction, which indicated an enlarged β-phase of PHB in the composite conduit compared to a pure PHB conduit. Tensile tests revealed greater ductility of PHB/Fe3O4-CA: the composite conduit has Young's modulus of 221 ± 52 MPa and an elongation at break of 28.6 ± 2.9%, comparable to clinical materials. Saturation magnetization (σs) of Fe3O4-CA and PHB/Fe3O4-CA is 61.88 ± 0.29 and 7.44 ± 0.07 emu/g, respectively. The water contact angle of the PHB/Fe3O4-CA conduit is lower as compared to pure PHB, while surface free energy (σ) is significantly higher, which was attributed to higher surface roughness and an amorphous phase as well as possible PHB/Fe3O4-CA interface interactions. In vitro, the conduits supported the proliferation of rat mesenchymal stem cells (rMSCs) and SH-SY5Y cells in a low-frequency magnetic field (0.67 Hz, 68 mT). In vivo, the conduits were used to bridge damaged sciatic nerves in rats; pure PHB and composite PHB/Fe3O4-CA conduits did not cause acute inflammation and performed a barrier function, which promotes nerve regeneration. Thus, these conduits are promising as implants for the regeneration of peripheral nerves.

Adenosine kinase gene modified mesenchymal stem cell transplantation retards seizure severity and associated cognitive impairment in a temporal lobe epilepsy rat model

PurposeTemporal lobe epilepsy (TLE) has a high risk of developing drug resistant and cognitive comorbidities. Adenosine has potential anticonvulsant effects as an inhibitory neurotransmitter, but drugs targeting its receptors and metabolic enzyme has inevitable side effects. Therefore, we investigated adenosine augmentation therapy for seizure control and cognitive comorbidities in TLE animals. MethodsUsing lentiviral vectors coexpressing miRNA inhibiting the expression of adenosine kinase (ADK), we produced ADK--rMSC (ADK knockdown rat mesenchymal stem cell). ADK--rMSC and LV-con-rMSC (rMSC transduced by randomized scrambled control sequence) were transplanted into the hippocampus of TLE rat respectively. ADK-+DPCPX group was transplanted with ADK--rMSC and intraperitoneally injected with DPCPX (adenosine A1 receptor antagonist). Seizure behavior, EEG, CA1 pyramidal neuron apoptosis, and behavior in Morris water maze and novel object recognition test were studied ResultsAdenosine concentration in the supernatants of 105 ADK--rMSCs was 13.8 ng/ml but not detectable in LV-con-rMSCs. ADK--rMSC (n = 11) transplantation decreased spontaneous recurrent seizure (SRS) duration compared to LV-con-rMSC (n = 11, P < 0.05). CA1 neuron apoptosis was decreased in ADK--rMSC (n = 3, P < 0.05). ADK--rMSC (n = 11) improved the Morris water maze performance of TLE rats compared to LV-con-rMSC (n = 11, escape latency, P < 0.01; entries in target quadrant, P < 0.05). The effect of ADK--rMSC on neuron apoptosis and spatial memory were counteracted by DPCPX. However, ADK--rMSC didn’t improve the performance in novel object recognition test. ConclusionAdenosine augmentation-based ADK--rMSC transplantation is a promising therapeutic candidate for TLE and related cognitive comorbidities.

MicroRNA-181a-5p promotes fibroblast differentiation of mesenchymal stem cells in rats with pelvic floor dysfunction

The use of stem cells capable of multilineage differentiation in treating Pelvic Floor Dysfunction (PFD) holds great promise since they are susceptible to entering connective tissue of various cell types and repairing damaged tissues. This research investigated the effect of microRNA-181a-5p (miR-181a-5p) on Bone Marrow Mesenchymal Stem Cells (BMSCs) in rats with PFD. BMSCs were transfected and analyzed for their fibroblast differentiation ability. miR-181a-5p, MFN1, and fibroblast-related genes were quantitatively analyzed. Whether MFN1 is a target gene of miR-181a-5p was predicted and confirmed. The efficacy of BMSCs in vivo rats with PFD was evaluated by measuring Leak Point Pressure (LPP), Conscious Cystometry (CMG), hematoxylin and eosin staining, and Masson staining. The present results discovered that miR-181a-5p was up-regulated and MFN1 was down-regulated during the differentiation of BMSCs into fibroblasts. Fibroblast differentiation of BMSCs was promoted after miR-181a-5p was induced or MFN1 was suppressed, but it was suppressed after miR-181a-5p was silenced. miR-181a-5p improved LPP and conscious CMG outcomes in PDF rats by targeting MFN1 expression, thereby accelerating fibroblast differentiation of BMSCs. In brief, miR-181a-5p induces fibroblast differentiation of BMSCs in PDF rats by MFN1, potentially targeting PDF therapeutics.

A comparative analysis of stem cell differentiation on 2D and 3D substrates using Raman microspectroscopy.

Chondrogenesis is a complex cellular process that involves the transformation of mesenchymal stem cells (MSCs) into chondrocytes, the specialised cells that form cartilage. In recent years, three-dimensional (3D) culture systems have emerged as a promising approach to studying cell behaviour and development in a more physiologically relevant environment compared to traditional two-dimensional (2D) cell culture. The use of these systems provided insights into the molecular mechanisms that regulate chondrogenesis and has the potential to revolutionise the development of new therapies for cartilage repair and regeneration. This study demonstrates the successful application of Raman microspectroscopy (RMS) as a label-free, non-destructive, and sensitive method to monitor the chondrogenic differentiation of bone marrow-derived rat mesenchymal stem cells (rMSCs) in a collagen type I hydrogel, and explores the potential benefits of 3D hydrogels compared to conventional 2D cell culture environments. rMSCs were cultured on 3D substrates for 3 weeks and their differentiation was monitored by measuring the spectral signatures of their subcellular compartments. Additionally, the evolution of high-density micromass cultures was investigated to provide a comprehensive understanding of the process and complex interactions between cells and their surrounding extracellular matrix. For comparison, rMSCs were induced into chondrogenesis in identical medium conditions for 21 days in monolayer culture. Raman spectra showed that rMSCs cultured in a collagen type I hydrogel are able to undergo a distinct chondrogenic differentiation pathway at a significantly higher rate than the 2D culture cells. 3D cultures expressed stronger and more homogeneous chondrogenesis-associated peaks such as collagens, glycosaminoglycans (GAGs), and aggrecan while manifesting changes in proteins and lipidic content. These results suggest that 3D type I collagen hydrogel substrates are promising for in vitro chondrogenesis studies, and that RMS is a valuable tool for monitoring chondrogenesis in 3D environments.

Effect of mesenchymal stem cells on animal semen during storage

Mesenchymal stem cells (MSCs) have been known to mankind since the mid-20th century. The comprehensive study revealed their high biologically active potential. Capacity of forming several types of body tissues was demonstrated. The stem cells, like any other cells, exert their effect on surrounding cells and tissues by secreting extracellular vesicles. The extracellular vesicles of the stem cells possess biological activity of parent cells. Taking into account the regenerative potential of the mesenchymal stem cells, they are currently used in medicine, and also in veterinary medicine for treatment of various injuries of the companion animals. Effect of the mesenchymal stem cells on boar and rat sperm cells during 12-hour storage was studied. The study results demonstrated that during 12 hours of coincubation, the porcine MSCs contributed to the survival of the boar sperm cells and maintenance of their motility at 60–80% (depending on the solvent) as compared to the controls. Such a significant effect was not however observed during coincubation of the rat sperm cells with rat MSCs. But it should be noted that before the3rdhour of coincubation, the experimental sperm motility was higher than that of the control. By hour5 of the observation, this difference was leveled. The rat and boar sperm cells are likely to have different physiological characteristics, which were reflected in the results obtained. Therefore, possibility of using the MSCs for the storage and cryopreservation of the semen of some animals was demonstrated, but this requires further research.

Rehabilitation facilitates functional improvement following intravenous infusion of mesenchymal stem cells in the chronic phase of cerebral ischemia in rats

The primary objective of this study was to investigate the potential facilitating effects of daily rehabilitation for chronic cerebral ischemia following the intravenous infusion of mesenchymal stem cells (MSC) in rats. The middle cerebral artery (MCA) was occluded by intraluminal occlusion using a microfilament (MCAO). Eight weeks after MCAO induction, the rats were used as a chronic cerebral ischemia model. Four experimental groups were studied: Vehicle group (medium only, no cells); Rehab group (vehicle + rehabilitation), MSC group (MSC only); and Combined group (MSC + rehabilitation). Rat MSCs were intravenously infused eight weeks after MCAO induction, and the rats received daily rehabilitation through treadmill exercise for 20 min. Behavioral testing, lesion volume assessment using magnetic resonance imaging (MRI), and histological analysis were performed during the observation period until 16 weeks after MCAO induction. All treated animals showed functional improvement compared with the Vehicle group; however, the therapeutic efficacy was greatest in the Combined group. The combination therapy is associated with enhanced neural plasticity shown with histological analysis and MRI diffusion tensor imaging. These findings provide behavioral evidence for enhanced recovery by combined therapy with rehabilitation and intravenous infusion of MSCs, and may form the basis for the development of clinical protocols in the future.

In Vitro and In Vivo Evaluation of 3D Printed Poly(Ethylene Glycol) Dimethacrylate-Based Photocurable Hydrogel Platform for Bone Tissue Engineering.

This study focuses to develop a unique hybrid hydrogel bioink formulation that incorporates poly(ethylene glycol) dimethacrylate (PEGDMA), gelatin (Gel), and methylcellulose (MC). This formulation achieves the necessary viscosity for extrusion-based three-dimensional (3D) printing of scaffolds intended for bone regeneration. After thorough optimization of the hybrid bioink system with Gel, three distinct scaffold groups are investigated in vitro: 0%, 3%, and 6% (w/v) Gel. These scaffold groups are examined for their morphology, mechanical strength, biodegradation, in vitro cell proliferation and differentiation, and in vivo bone formation using a rat cranial defect model. Among these scaffold compositions, the 3% Gel scaffold exhibits the most favorable characteristics, prompting further evaluation as a rat mesenchymal stem cell (rMSC) carrier in a critical-size cranial defect within a Lewis rat model. The compressive strength of all three scaffold groups range between 1 and 2MPa. Notably, the inclusion of Gel in the scaffolds leads to enhanced bioactivity and cell adhesion. The Gel-containing scaffolds notably amplify osteogenic differentiation, as evidenced by alkaline phosphatase (ALP) and Western blot analyses. The in vivo results, as depicted by microcomputed tomography, showcase augmented osteogenesis within cell-seeded scaffolds, thus validating this innovative PEGDMA-based scaffold system as a promising candidate for cranial bone defect healing.

Unstable angina due to extrinsic coronary compression secondary to a gigantic pulmonary artery aneurysm: An uncommon etiology

Unstable angina due to extrinsic coronary compression secondary to a gigantic pulmonary artery aneurysm: An uncommon etiology

Injection of rat mesenchymal stem cells leads to their homing and differentiation in the liver in a blunt liver trauma model

Injection of rat mesenchymal stem cells leads to their homing and differentiation in the liver in a blunt liver trauma model