Rare Earth Ion Doping Research Articles

Effect of Rare Earth Ion Doping on the Performance of Lithium-Rich Cathode Materials for Lithium-Ion Batteries

Lithium-rich layered oxide cathode materials have the advantages of a high voltage and a high specific capacity. Their commercial applications have however been impeded by some disadvantages such as low initial coulombic efficiency and low cycle life. To overcome these issues, rare earth ion-doped lithium-rich layered oxide cathode materials are investigated in this work. The irreversible release of O2- in Li2MnO3 is suppressed by rare earth ions doping, which enhanced the initial coulombic efficiency of the materials. Meanwhile, the rare-earth ion radius used for doping is larger than the Mn4+ radius, which enlarges the (003)-crystalline plane spacing, resulting in a significant enhancement of the rate performance of the material.

Boosted Near-Infrared Photothermal Conversion in Rare Earth Ions-Doped 2D SnSe Nanosheets for Solar-Powered Water Evaporation Systems.

Solar-powered water evaporation as a clean and abundant renewable energy-efficient desalination technology provides a promising strategy to solve the shortage of freshwater resources. However, the development and application of solar vapor technology are hindered by the relatively low near-infrared photothermal conversion efficiency of existing materials and the lack of effective improvement strategies. In this work, the conductivity characteristics of 2Dsemiconductors are capitalized on the high visible light absorption and ultra-low thermal. Specifically, rare-earth ion dopants into SnSe nanosheets, significantly boosting their near-infrared photothermal conversion efficiency and solar water evaporation performance are introduced. Remarkably, the photothermal conversion efficiency of the doped SnSe nanosheets surged from 51.56% to 82.11%, surpassing many previously reported photothermal materials. Furthermore, leveraging these nanosheets with enhanced photothermal conversion efficiency, a solar interfacial evaporation system is constructed. The evaporation rate of 2.17kgm-2h-1 and the efficiency of 96.5% can be achieved at one solar irradiance, and it also has good salt-resistance properties. The findings demonstrate the potential of rare earth ion-doped 2D semiconductor nanosheets in solar water evaporation, paving the way for future sustainable desalination solutions.

Upconversion luminescence of pyrochlore structured (A2B2O7) phosphors

The pyrochlore-structured (A2B2O7) compounds have emerged as a focal point in contemporary research and materials science, captivating attention for their intriguing properties such as photoluminescence, superconductivity, ionic mobility, and potential applications in high-temperature barrier coatings. Their potential application in up- or down-conversion photoluminescence further positions them for integration into a myriad of optoelectronic and sensing devices. Building on extensive prior research, this review delves into the upconversion (UC) luminescence properties of numerous pyrochlore-structured host materials (titanates, zirconates, hafnates, and ytterbium pyrochlores), specifically those doped with rare earth ions. While these materials may share similar chemical and structural characteristics, their luminescent capabilities exhibit significant variation upon rare earth ion doping. The phase transitions of various pyrochlore-structured compounds with respect to cation ratio, the relationship between crystal structure, doping concentrations, and UC luminescent properties in pyrochlore-structured compounds are summarized in detail. Through controlled doping strategies and structural adjustments, researchers have been able to tailor the luminescence properties of pyrochlore structured compounds to meet specific application requirements. The intricate exploration of the UC luminescence properties of pyrochlore-structured compounds, especially when doped with rare earth ions, showcases the rich potential for these materials in a wide array of applications across various fields, from advanced sensing technologies to innovative optoelectronic devices, paving the way for exciting advancements in materials science and beyond.

Microstructural and electrical properties of La0.9B0.1AlO3 (B=Pr, Nd, Sm) ceramics obtained by rare-earth ion doping

This study used the solid-phase method to prepare thermosensitive perovskite ceramics, La0.9B0.1AlO3 (B = Pr, Nd, Sm). The XRD and EDS results indicated that all components presented a single phase and all elements were uniformly distributed, formed a good solid solution. The SEM results clearly illustrated that the doped elements had enhanced the surface morphology, resulting in more uniform grain formation. The TEM results showed that linear defects were present, which led to an uneven stress distribution; consequently, this enhanced the carrier transport. The alternating current (AC) impedance showed that the grain boundary resistance determined the overall complex impedance and exhibited a different conductive mechanism with increasing temperature, from polariton to ion conduction. With the introduction of Nd3+, the conductivity of La0.9Nd0.1AlO3 increased and its temperature range increased from 600 – 1400 °C to 100–1500 °C. In La0.9Sm0.1AlO3, the presence of Sm2+ enhances the aging stability by elevating the oxygen vacancy concentration and the aging drift rate (ΔR/R0) was found to be lower than 2 %. In addition, DFT-based calculations were performed to investigate the property changes in the crystal structure and energy band structure of pure and doped LaAlO3. This study demonstrated an effective way to improve the performance of high-temperature thermistor materials using different doping strategies.

Efficient broadband near-infrared emission based on copper-alloyed metal halides

Recently, metal halides have shown broad application prospects due to excellent electronic and optical properties. Although significant developments have been realized, the spectra range of their photoluminescence (PL) emission is mainly limited to the visible region. Near-infrared (NIR) emitting materials are widely used in the fields of night vision, biomedical imaging, non-destructive food inspection, etc. On this occasion, extending the luminescence scope of metal halides to NIR region is of great significance. Generally, NIR-emitted metal halides are realized through rare earth (RE) ions doping. However, RE luminescence usually have narrow-band characteristics, which makes it difficult to realize broadband NIR emission. In this study, we present an efficient broadband NIR-emitted metal halide CsAgBr2 through copper ions alloying, its emission locates at 830 nm with a large FWHM (full width at half maximum) of 332 nm. Theoretical calculations suggest that the incorporation of Cu+ could effectively modulate the density of states and enhance the localized characterization, which is beneficial to boost the PL efficiency. Furthermore, this material displays favorable structure stability under ambient conditions. This study demonstrates the great application potential of Cu+-alloyed CsAgBr2 in the field of NIR optical electronics.

Experimental study and DFT+U calculations on the impact of Rare-Earth ion (La3+, Sm3+, Y3+, Yb3+) doped CeO2 Core-Shell abrasives on polishing performance

A series of carbon spheres coated with Rare-Earth ion-doped (La3+, Sm3+, Y3+, Yb3+) CeO2 (CS@CeO2) were synthesized using eco-friendly hydrothermal and chemical precipitation methods. The structural characteristics of the abrasives were thoroughly analyzed using XRD, SEM, TEM, and FT-IR techniques. A detailed analysis of Ce3+ and Vo concentrations on the CeO2 layer surface was conducted using XPS and Raman spectroscopy. The analysis results indicated that CS@Ce0.9Y0.1O2 abrasives exhibited the highest Ce3+ (46.23 %) and Vo (25.39 %) concentrations. Additionally, the polishing performance of the abrasives was evaluated using atomic force microscopy (AFM). The CS@Ce0.9Y0.1O2 abrasive exhibited superior polishing performance, achieving the lowest surface roughness (Ra = 0.26 nm) compared to commercial abrasives (Ra = 0.77 nm), reducing Ra by 66.23 %. Moreover, density functional theory with the Hubbard U method (DFT+U) was used to systematically investigate the oxygen vacancy formation energy, structural stability, and electronic properties of CeO2 doped with Rare-Earth ions. These findings demonstrate that doping with Rare-Earth ions possessing ionic radii close to that of Ce4+ effectively enhances the concentration of oxygen vacancies and Ce3+ ions, which is crucial for improving polishing performance. This work provides valuable reference data on the doping of Rare-Earth ions in CeO2-based polishing abrasives.

Facile sol–gel synthesis of trivalent Al3+-Gd3+ ions co-doped nanoscale cobalt spinel ferrite for magneto-electronic applications

The magnetic spinel ferrites nanomaterials simultaneously doped with multivalent cations have gained a lot of interest from many researchers during the last decade. Also, the doping of trivalent rare-earth ions in spinel ferrites is promising for many technological applications. Considering these facts, in this work we investigated the trivalent Al3+-Gd3+ ions co-doped cobalt ferrite nanoparticles with nominal composition as CoFe2-2xAlxGdxO4 (x = 0.00, 0.03, 0.05, 0.07, 0.10). The sol–gel auto ignition route assisted by citric acid as a chelating agent was utilized to synthesize the series of nanoparticles. The Rietveld refined X-ray diffraction (XRD) patterns were analyzed to ensure the single-phase formation of nanoparticles with spinel cubic structure. The spherical-shaped grain morphology of the nanoparticles was indicated by scanning electron microscopy (SEM) images. The elemental analysis obtained by energy dispersive X-ray analysis (EDAX) revealed stoichiometric formation of the samples along with high purity. The two prominent frequency modes analogous to the spinel ferrite structure were noted in the infrared spectra assuring the successful formation of all the samples. The soft magnetic behaviour with a lower coercivity of the prepared nanoparticles was confirmed by the vibrating sample magnetometer (VSM) technique. The DC electrical resistivity plots indicated that resistivity decreases with an increase in Al3+-Gd3+ co-doping. The dielectric studies of all the samples showed increasing behaviour with an increase in Al3+-Gd3+ co-doping. All the results suggest that the Al3+-Gd3+ co-doped cobalt ferrite nanoparticles can be useful for real-world applications, specifically in nanoelectronics devices.

Regulating the luminescence properties of Eu2W3O12 red-emitting phosphor via rare-earth ions doping for optical thermometry, white light-emitting diode and plant growth applications

To fulfil various applications, series of rare-earth (RE) ions (i.e., La3+, Gd3+, Sm3+) doped Eu2W3O12 (EWO) phosphors were synthesized. All the designed phosphors can emit glaring visible lights from Eu3+ and their fluorescence intensities were significantly enhanced through RE ions doping. To explore the impact of RE ions doping on the symmetric properties of Eu3+ in studied samples, theoretical calculation based on Judd-Ofelt theory was performed. Moreover, through utilizing temperature-related emission spectra, the thermal quenching behaviors of resultant phosphors were studied and found that their thermal stability had been improved by adding RE ions. Furthermore, the thermometric properties of designed phosphors were examined through adopting the single-band ratiometric technique to analyzing the temperature-dependent fluorescence intensity ratio of the emission band arising from 5D0 → 7F2 transition of Eu3+. It is found that maximum absolute and relative sensitivities of resulting phosphors were 0.197 and 1.202 % K−1, respectively. Additionally, two types of devices, i.e., white light-emitting diode (white-LED) and red-emitting LED, where the prepared phosphors play as red-emitting components, were fabricated. The packaged white-LEDs can emit warm white light with high color rendering index and low correlated color temperature, which are insensitive to operating current. Considering the red-emitting LEDs, their emission bands overlap with the absorption bands of plant pigments, which can promote plant growth and it was verified by peppermint growth experiments. These results verify that the introduction of RE ions is a feasible approach to modify the luminescence performances of phosphors to realize diversified applications.

Sm3+-Doped CdFe2O4 Nanocrystals Prepared in Water-Soluble Polymeric Nanoreactors and Their Characterizations

The rare-earth ion doping in nanocrystals has the advantage on improving the interested properties. As one of rare-earths, the trivalent samarium ion (Sm[Formula: see text]) was used as a dopant. The precursor of Sm[Formula: see text]-doped cadmium ferrite (CdFe2O4) nanocrystals was reacted in water-soluble polymeric nanoreactors as a dispersed phase in miniemulsion, and then calcinated to form doped nanocrystals. The 1% Sm[Formula: see text]-doped nanocrystal in small size exhibited the smaller narrow gap energy and weak photoluminescent emission intensity; which attributed to the positive influences on the photocatalytic degradation. The selected Sm[Formula: see text]-doped spinel ferrite nanocrystals provide a unique catalyzer for organic compound photodegradation.

Fine-tuning of redox-ability, optical, and electrical properties of Bi2MoO6 ceramics via lanthanide doping and rGO integration for photo-degradation of Methylene Blue and Ciprofloxacin

Herein, lanthanide ion (Gd+3) doped Bismuth Molybdate (Bi2MoO6) integrated on the rGO sheets has been prepared as a novel photocatalyst (Gd@Bi2MoO6/rGO) for the photocatalytic treatment of toxic pollutants. Different physiochemical, optical, electrical, thermal, and electrochemical properties of Gd@Bi2MoO6/rGO, along with its counterparts (Bi2MoO6 and Gd@Bi2MoO6), were studied through XRD, SEM/TEM, FT-IR, UV/Vis, I-V, TGA, Mott-Schottky, and EIS measurements. Photocatalytic experiments revealed that Gd@Bi2MoO6/rGO exhibited significantly enhanced photocatalytic activity, achieving 96.2 % photo-degradation of Methylene Blue with 120 min of irradiation, which is 6.5 and 3.1 times higher compared to Bi2MoO6 (40.9 %) and Gd@Bi2MoO6 (64.8 %), respectively. Moreover, Gd@Bi2MoO6/rGO demonstrated a notable photocatalytic efficiency of 81.7 % towards Ciprofloxacin, significant as per the existing literature benchmark. The enhanced photocatalytic activity is ascribed to the in-built Gd+3 redox centers, high electrical conductivity (7.35 × 10−3 S/m), favorable flat band potential (-0.81 V), and low semiconductor impedance (Rct = 51.71 Ω and Rs = 0.90 Ω). Additionally, the electron-capturing ability of lanthanide dopant ions and S-C heterojunction of Gd@Bi2MoO6/rGO facilitates the separation of photo-generated e-/h+ pairs and favors high concentrations of ROS. The results obtained highlight the potential of Gd@Bi2MoO6/rGO for applications in photocatalysis and wastewater treatment.

Manipulating and investigating the room-temperature magnetic memory phenomenon: The impact of rare-earth ion doping on nickel oxide nanoparticles

This study investigates the relationship between point defect density and magnetic properties in nickel oxide (NiO) nanoparticles (NPs). Specifically, we explore the effects of 0.5 % trivalent rare-earth ion (RE3+: Ce3+, Pr3+, Nd3+, Sm3+, and Dy3+) doping on NiO NPs, considering the influence of RE3+ ionic radius on structural modulation and magnetic properties. Our findings reveal important trends: increased microstrain (0.08 %–0.17 %) and decreased crystalline size (36–17 nm) with increasing ionic radius (r = 0.91 to 1.01 Å), along with a preference for growth along the (1 1 1) plane over (2 0 0). Additionally, multivalent point defects increase with the increase of ionic radius. Substituting Ni2+ site with RE3+ ion promotes nearest-neighbor weak ferromagnetic interaction over next-nearest-neighbor strong antiferromagnetic (AF) interaction. This leads to a redshift of two magnons (2 M) frequency by 50 cm−1 and enhanced room temperature (RT) magnetization (0.23–0.43 emu/g) with increasing ionic radius. Ce-doped NiO (r = 1.01 Å) shows the smallest crystalline size (17 nm), maximum 2 M redshift, and enhanced RT magnetization (0.43 emu/g) based on interacting bound magnetic polaron model. Ce-, Pr-, Nd-, and Sm-doped NiO NPs exhibit RT magnetic memory effects, while Dy-doped NiO NPs (r = 0.912 Å) display AF properties. Our analysis provides valuable insights for designing RT magnetic memory materials with tailored properties through suitable RE3+ ion substitutions.

Effect of Rare Earth Ion Substitution on Phase Decomposition of Apatite Structure.

The paper describes an investigation of phase decomposition of apatite lattice doped with rare earth ions (cerium, samarium, and holmium) at temperatures ranging from 25-1200 °C. The rare-earth ion-doped apatite minerals were synthesized using the sol-gel method. In situ high-temperature powder X-ray diffraction (XRD) was used to observe the phase changes and the lattice parameters were analyzed to ascertain the crystallographic transformations. The expansion coefficient of the compounds was determined, and it was found that the c-axis was the most expandable due to relatively weak chemical bonds along the c-crystallographic axis. Differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA) were used to examine the decomposition properties of the materials. Due to rare earth ion doping, the produced materials had slightly variable decomposition behaviour. The cerium and samarium ions were present in multiple oxidation states (Ce3+, Ce4+, Sm3+, Sm2+), whereas only Ho3+ ions were observed. Rare earth ion substitution affects tri-calcium phosphate proportion during decomposition by regulating concentrations of vacancies. X-ray photoelectron spectroscopy (XPS) analysis indicated that cerium and samarium ion-doped apatite yielded only 25 % tricalcium phosphate during decomposition. This finding advances our understanding of apatite structures, with implications for various high-temperature processes like calcination, sintering, hydrothermal processing, and plasma spraying.

Manipulation of Upconversion Luminescence in Heavily Lanthanide‐Doped Halide Double Perovskites for Optical Information Storage

AbstractUpconversion (UC) process involves diverse energy levels and photoluminescence modes, however, it faces the challenge of concentration quenching of the doped lanthanide ions with multiple luminescence centers. Herein, Yb3+/Ho3+ and Yb3+/Tm3+ are heavily codoped into the lead‐free halide double perovskite single crystal Cs2NaErCl6, enabling the controlled energy transfer UC process, and accordingly, the UC materials exhibit anti‐concentration‐quenching owing to the defect tolerance characters. Depending on different doping couples, the UC materials show green and red emissions under the 980 nm laser excitations. Moreover, the green‐to‐red emission ratio in Yb3+/Tm3+ codoped Cs2NaErCl6 changes dynamically with the increasing pumping intensity due to the different sensitivities of the excited energy levels. This study provides a renewed direction of the lanthanide ions heavily‐doped halide double perovskites toward UC materials and facilitates the development of new smart luminescence materials for optical information storage applications.

Significantly enhanced upconversion luminescence intensity and tailorable chromaticity of Sn4+-doped NaYF4:Yb3+/Er3+

The internal modification with rare earth ion doping proved to be a very effective strategy for improving the luminescent properties of NaYF4-based upconversion materials. However, greatly enhancing the luminescence efficiency of NaYF4:Yb3+/Er3+ remains a major challenge. Herein, the effects of Sn4+ doping on the structure and luminescent performance of such material were explored. The hydrothermal molten-salt method was applied to synthesize the Sn4+-doped NaYF4:Yb3+/Er3+ upconversion materials, and their crystal structures, morphologies, surface chemical composition and element states, and luminescence performance were characterized. It was found that Sn4+ doping can significantly enhance the luminescence intensity and tailor the chromaticity of NaYF4:Yb3+/Er3+. In particular, the green (G) and red (R) luminescence intensity levels of the 30 mol% Sn4+ doped material were increased by factors of 26.97 and 38.91, respectively. The R/G ratio was incremented from 0.34 for the undoped material to 0.83 for the 40 mol% Sn4+ doped counterpart. The Sn4+ doping led to the change of lattice distortion and crystal growth pattern of NaYF4:Yb3+/Er3+. The mechanism for Sn4+ doping to affect the luminescence properties of the prepared upconversion material was also explored. The changes in luminescence intensity levels and R/G ratios could be attributed to the highly asymmetric distorted lattice and crystal field resulting from Sn4+ doping.

Boosting electrochemical energy storage properties of SrGd2O4 through Yb3+ and Tm3+ rare earth ion doping

Electrochemical supercapacitors represent advanced energy storage devices that excel in the swift storage and delivery of electrical energy, effectively bridging the gap between conventional capacitors and batteries. The present work, aimed to investigate charge storage properties of SrGd2O4 and rare earth ions Yb3+ and Tm3+ doped in SrGd2O4. Both materials were prepared via simple sol-gel synthesis and characterized by XRD, XPS, and FE-SEM with EDS. Characterization confirmed the presence of Tm3+ and Yb3+ in the SrGd2O4 matrix with a uniform distribution of elements. The charge storage behavior of pure SrGd2O4 and SrGd2O4:Yb4Tm1 in various electrolytes was thoroughly explored. Large electrochemical potential windows were shown by both electrode materials in aqueous 6 M KOH (1.7 V), which is essential for supercapacitors to achieve high specific energy. Furthermore, SrGd2O4:Yb4Tm1 demonstrated a substantially more pronounced charge storage effect in 6 M KOH electrolyte, with almost double times higher specific capacitance values compared with an un-doped SrGd2O4 sample. The main impact on the electrochemical window had matrix SrGd2O4, while the main impact on specific capacitance had rear earth dopants (Yb3+ and Tm3+). Improved charge storage characteristics of SrGd2O4:Yb4Tm1 were also evident through a notable reduction in overall resistance observed in electrochemical impedance spectroscopy experiments. Concerning the two-electrode GCD measurements, the SrGd2O4:Yb4Tm1 electrode in 6 M KOH showed a specific capacitance of 143 F g−1, with the specific energy of 12.5 Wh kg−1 at 0.6 A g−1. These findings demonstrate the potential of rare earth ion doping in enhancing the energy storage properties of SrGd2O4, offering promising avenues for the development of high-performance supercapacitors.

Preparation and sensing performance study in ultra-wide temperature range of K3LuF6:Er3+,Yb3+ up-converting luminescent materials with cryolite structure

Cryolite-type materials have advantages of low phonon energy, easy rare-earth ion doping, and stable physicochemical properties, and they are considered ideal matrices for up-converting luminescent materials. In this paper, a series of K3LuF6:Er3+,Yb3+ up-converting materials with cryolite structure were prepared for the first time by high-temperature solid-phase method. The compositions, structures and luminescent properties were systematically characterized by X-ray powder diffractometry (XRD), field emission scanning electron microscopy (SEM) and fluorescence spectroscopy (PL). Under 980 nm excitation, the sample emission spectra mainly consisted of green and red emission bands with peaks at 525, 546 and 662 nm, corresponding to the 2H11/2-4I15/2, 4S3/2-4I15/2 and 4F9/2-4I15/2 electron transitions of Er3+, respectively. In addition, the temperature sensing characteristics of two thermally coupled energy levels (2H2/11 and 4S3/2) were studied based on the fluorescence intensity ratio (FIR) technique in the range of 79–579 K. All the results show that K3LuF6:Er3+/Yb3+ up-converting luminescent materials have excellent temperature sensing performance in the ultra-wide temperature range and have broad application prospects in the field of temperature sensing.

Evidence and Practical Applications of Site Occupancy Theory (SOT) of Eu3+ in Scheelite Compounds.

The determination of the site occupancy of activators in phosphors is essential for precise synthesis, understanding the relationship between their luminescence properties and crystal structure, and tailoring their properties by modifying the host composition. Herein, one simple method was proposed to help determine the sites at which the doping of rare earth ions or transition metal ions occupies in the host lattice through site occupancy theory (SOT) for ions doped into the matrix lattice. SOT was established based on the fact that doping ions preferentially occupy the sites with the lowest bonding energy deviations. In order to provide detailed experimental evidence to prove the feasibility of SOT, several scheelite-type compounds were successfully synthesized using a high-temperature solid-phase method. When Eu3+ ions occupy a similar surrounding environment site, the photoluminescence spectra of the activators Eu3+ are similar. Therefore, by comparing the intensity ratio of photoluminescence spectra and the mechanism of all transitions of KEu(WO4)2, KY(WO4)2:Eu3+, Na5Eu(WO4)4, and Na5Y(WO4)4:Eu3+, it was proved that SOT can successfully confirm the site occupation when doped ions enter the matrix lattice. SOT was further applied to the sites occupied by Eu3+ ion-doped LiAl(MoO4)2 and LiLu(MoO4)2.

Oxygen vacancy engineering and rare earth ion modification in Er-doped Bi0.5Na0.5TiO3–BaTiO3 for piezo-photocatalysis

The pursuit of high-performance piezo-photocatalysts through structural modifications has been a focal point of investigation within the realm of related scientific disciplines. In this study, we successfully designed Er-doped Bi0.5Na0.5TiO3–BaTiO3 combined with rare earth ion doping and solid solution modification, and the prepared particles exhibited homogeneous grain sizes and optimized concentrations of oxygen vacancies (OV). The synergistic incorporation of OV (accelerator for catalytic reaction) and Er3+ results in an impressive 12-fold enhancement of the piezo-photocatalytic rate when degrading the Rhodamine B dye. The optimal composition 0.96BNT-0.04BT-Er demonstrates outstanding electrochemical properties, including a superior photocurrent response and minimal impedance, highlighting its exceptional performance in piezo-photocatalysis. The fundamental enhancement in catalytic performance can be attributed to the reconfiguration of the band structure of 0.96BNT-0.04BT-Er, which has been meticulously calculated utilizing DRS and VB-XPS and the internal mechanism was explained in detail. This research serves as a source of inspiration for the investigation of solid solutions among piezo-photocatalysts and sheds light on the vital role of band structure in governing catalytic performance.

Sm2O3-doped all-inorganic perovskite nanocrystalline glass induces self-crystallization of CsPbBr3 nanocrystals and is used in WLEDs

All-inorganic perovskite quantum dots (QDs) in glass materials, specifically CsPbX3 (X = Cl, Br, I), are being considered as the next-generation fluorescent materials due to their impressive luminous performance and stability. However, the crystallization process of quantum dots within the glass presents uncontrollable challenge, leading to uneven crystallinity and subsequent reductions in light efficiency, thereby affecting practical applications. In glass ceramics doped with rare-earth oxides, the introduction of rare-earth ions as nucleating agents can promote the self-precipitation of nanocrystalline crystals within the glass. Building upon this principle, we have doped rare-earth ions into borosilicate glass for the first time to induce the self-crystallization of CsPbBr3 QDs. This approach effectively enhances the equilibrium distribution of quantum dots within the glass, resulting in a significant improvement in luminosity. Furthermore, the luminescence spectrum range of quantum dot-shaped luminescent glass materials can be finely tuned through rare-earth ion doping. This finding holds both theoretical and practical significance for their application in the field of lighting.

Research status of rare-earth-ion-doped infrared laser

Infrared lasers have an extensive range of applications in sensing, detection, communication, medicine, and other fields. The principle of directly pumping solid-state lasers is simple, and it can easily achieve high-power and high-efficiency laser output, which is one of the important means to obtain infrared lasers. Incorporating rare earth ions into the substrate as the gain medium for directly pumping solid-state lasers can alter their optical performance and further enhance the performance of the laser. Lasers based on rare earth ion doping have a small volume, high conversion efficiency, good beam quality, wide tuning range, and multiple operating modes. Therefore, the proportion of rare earth ions doped as the gain medium for activating ions is currently very large. In this review, Ho3+, Tm3+, and Er3+ are selected as the representative rare earth ions, and their optical properties, such as luminous power and fluorescence lifetime, when doped in different substrates, such as crystals, ceramics, and fibers, are introduced, respectively, to illustrate their feasibility as infrared laser gain media. In addition, we show the different optical properties when doped with two ions, three ions, and four ions, demonstrating their great potential as infrared laser gain media.