Measurement Range Research Articles

Experiments with Combining LiDAR and Camera Data Acquired by UAS and Smartphone to Support Mapping

Abstract. Aerial mapping using Unmanned Aerial Systems (UAS), such as the DJI Mavic 3 Enterprise, has revolutionized photogrammetry, enabling efficient data capture for small-scale projects. The typical nadir perspective of UAS mapping, however, imposes limitations on capturing critical details of features due to its predominantly vertical viewpoint. Overcoming this challenge often requires manual, low-altitude flights by experienced UAS pilots to achieve high-angle oblique perspectives, unless gimbled camera mount is used. This study explores the integration of high oblique angle perspectives using the iPhone 15 Pro, which boasts advanced camera capabilities and an integrated LiDAR sensor, to complement UAS imagery. The iPhone 15 Pro's camera sensors provide a Ground Sampled Distance (GSD) comparable to UAS cameras, while its LiDAR sensor, with about five meters of range, enhances mapping capabilities by delivering accurate depth measurements in close range. By utilizing various georeferencing options for the imagery and LiDAR data from the iPhone 15 Pro with UAS nadir imagery, we can achieve a more comprehensive object space reconstruction, significantly improving the accuracy of geospatial mapping. Both the Mavic 3 Enterprise and the iPhone 15 Pro, though operating independently on their respective platforms, support Real-Time Kinematic (RTK) corrections, facilitating precise positioning for the entire system trajectory. Strategic placement and utilization of Ground Control Points (GCPs) aid in the georeferencing of the complete dataset, enhancing its overall accuracy. To validate the accuracy of the acquired data, checkpoints are established on-site. The positions derived from the integrated UAS and iPhone 15 Pro data are compared against these checkpoints to quantify the accuracy and reliability of the data. Additionally, Post-Processed Kinematic (PPK) techniques are employed to validate the trajectories of all data collection systems, ensuring the reliability of the acquired data, especially in instances where RTK corrections may be lacking. In summary, this research showcases comprehensive, multi-dimensional geospatial datasets by conducting validation studies that assess the accuracy and reliability of georeferenced datasets against known ground truth checkpoints. Such validation studies are crucial for identifying gaps in current methodologies and suggesting areas for improvement, thereby aiming to enhance the quality and accuracy of geospatial mapping applications. Through the integration of UAS and smartphone mapping, complemented by rigorous validation efforts, we aspire to achieve improved geospatial mapping accuracy.

Greatly Enhanced Radiative Transfer Enabled by Hyperbolic Phonon Polaritons in α‐MoO3

AbstractOrthorhombic molybdenum trioxide (α‐MoO3) is a highly anisotropic hyperbolic material in nature. Within its wide Reststrahlen bands, α‐MoO3 has hyperboloidal dispersion that supports bulk propagation of high‐k phonon polariton modes. These modes can serve as energy transport channels to greatly enhance radiative heat transfer inside the material. In this work, large radiative transfer enabled by phonon polaritons in α‐MoO3 is demonstrated. The study first determines the temperature‐dependent permittivity of α‐MoO3 from polarized Fourier‐Transform Infrared (FTIR) spectroscopy measurements and then uses a many‐body radiative heat transfer model to predict the equivalent radiative thermal conductivity of hyperbolic phonon polariton. Contribution of radiative transfer to the total thermal transport is experimentally determined from the Time‐Domain Thermoreflectance (TDTR) measurements in a temperature range from −100 to 300 °C. It is found that radiative transfer can account for ≈60% of the total thermal transport at a temperature of 300 °C. That is, conductive thermal transport is enhanced by >100% by radiative transfer, or radiation inside α‐MoO3 is greater than that of conduction. These additional energy pathways will have important implications in thermal management in new materials and devices.

Quality of life, craniomandibular function, and psychosocial factors related to pain and movement in patients with head and neck cancer.

To describe the characteristics of and the associations between health-related quality of life, pain, craniomandibular function, and psychosocial factors related to pain and fear of movement in patients with head and neck cancer. Seventy-eight patients diagnosed with HNC were recruited. Measurements of the maximum mouth opening range and pressure pain thresholds on the masseter muscle and the distal phalanx of the thumb were conducted, as well as a battery of self-report questionnaires were administrated, including the QoL Questionnaire (EORT QLQ-H&N35), Numeric Rating Scale (NRS), Pain Catastrophizing Scale (PCS), the Spanish translation of the Tampa Scale for Kinesiophobia for Temporomandibular Disorders (TSK-TMD), and the short version of the Craniofacial Pain and Disability Inventory (CF-PDI-11). The study sample (66.7% men, mean age 60.12 [11.95] years) experienced a moderate impact on their QoL levels (57.68 [18.25] EORT QLQ-H&N35) and high kinesiophobia values (20.49 [9.11] TSK-TMD). Pain was present in 41% of the patients, but only 3.8% reported severe pain. 26.4% had a restricted mouth opening range, and 34.62% showed significant catastrophism levels. There were strong positive correlations between EORT QLQ-H&N35 and CF-PDI-11 (r = 0.81), between NRS and CF-PDI-11 (r = 0.74), and between PCS and CF-PDI-11 (r = 0.66). Patients with HNC experience negative effects in their QoL, related to their impairment in craniomandibular function. Fear of movement, pain intensity, and catastrophism are associated with poorer functionality; relationships that should be considered when attempting to improve health care.

Noninvasive release of tendons using MRI guided focused ultrasound: a hybrid therapy using long-pulse focused ultrasound followed by thermal ablation

Introduction Magnetic Resonance-guided Focused Ultrasound (MRgFUS) thermal ablation is an effective noninvasive ultrasonic therapy to disrupt in vivo porcine tendon but is prone to inducing skin burns. We evaluated the safety profile of a novel hybrid protocol that minimizes thermal spread by combining long-pulse focused ultrasound followed by thermal ablation. Methods In-vivo Achilles tendons (hybrid N = 15, thermal ablation alone N = 21) from 15 to 20 kg Yorkshire pigs were randomly assigned to 6 treatment groups in two studies. The first (N = 21) was ablation (600, 900, or 1200 J). The second (N = 15) was hybrid: pulsed FUS (13.5 MPa peak negative pressure) followed by ablation (600, 900, or 1200 J). Measurements of ankle range of motion, tendon temperature, thermal dose (240 CEM43), and assessment of skin burn were performed in both groups. Results Rupture was comparable between the two protocols: 1/5 (20%), 5/5 (100%) and 5/5 (100%) for hybrid protocol, compared to 2/7 (29%), 6/7 (86%) and 7/7 (100%) for the ablation-only protocol with energies of 600, 900, and 1200 J, respectively. The hybrid protocol produced lower maximum temperatures, smaller areas of thermal dose, fewer thermal injuries to the skin, and fewer full-thickness skin burns. The standard deviation for the area of thermal injury was also smaller for the hybrid protocol, suggesting greater predictability. Conclusion This study demonstrated a hybrid MRgFUS protocol combining long-pulse FUS followed by thermal ablation to be noninferior and safer than an ablation-only protocol for extracorporeal in-vivo tendon rupture for future clinical application for noninvasive release of contracted tendon.

Performance of a High-Speed Pyroelectric Receiver as Cryogen-Free Detector for Terahertz Absorption Spectroscopy Measurements

The application of terahertz (THz) radiation in scientific research as well as in applied and commercial technology has expanded rapidly in recent years. One example is the progress in high-resolution THz spectroscopy based on quantum cascade lasers, which has enabled new observations in astronomy, atmospheric research, and plasma diagnostics. However, the lack of easy-to-use and miniaturised detectors has hampered the development of compact THz spectroscopy systems out of the laboratory environment. In this paper, we introduce a new high-speed pyroelectric receiver as a cryogen-free detector for THz absorption spectroscopy. Its performance is characterised by absorption spectroscopy measurements on a reference gas cell (RGC) with ammonia using a tunable THz quantum cascade laser at approximately 4.75 THz as the light source. It is shown that the receiver can record spectra up to 281 Hz without any artefacts to the observed spectral absorption profile, and the results reproduce the known pressure of ammonia in the RGC. This demonstrates that the pyroelectric receiver can be reliably used as an alternative to helium-cooled bolometers for absorption spectroscopy measurements in the THz range, with its main advantages being the high bandwidth, compactness, relatively low cost, and room-temperature operation. Its simplicity and high sensitivity make this receiver a key component for compact THz spectroscopy systems.

Reference measures of lower-limb joint range of motion, muscle strength, and selective voluntary motor control of typically developing children aged 5–17 years

Background: Joint range of motion based on the neutral null method, muscle strength based on manual muscle testing, and selective voluntary motor control based on selective control assessment of the lower extremity are standard parameters of a pediatric three-dimensional clinical gait analysis. Lower-limb reference data of children are necessary to identify and quantify abnormalities, but these are limited and when present restricted to specific joints or muscles. Methods: This is the first study that encompasses the aforementioned parameters from a single group of 34 typically developing children aged 5–17 years. Left and right values were averaged for each participant, and then the mean and standard deviation calculated for the entire sample. The data set was tested for statistical significance ( p < 0.05). Results: Joint angle reference values are mostly consistent with previously published standards, although there is a large variability in the existing literature. All muscle strength distributions, except for M. quadriceps femoris, differ significantly from the maximum value of 5. The mean number of repetitions of heel-rise test is 12 ± 5. Selective voluntary motor control shows that all distributions, except for M. quadriceps femoris, differ significantly from the maximum value of 2. Conclusion: Since typically developing children do not match expectations and reference values from the available literature and clinical use, this study emphasizes the importance of normative data. Excessively high expectations lead to typically developing children being falsely underestimated and affected children being rated too low. This is of great relevance for therapists and clinicians. Level of evidence: 3.

The Influence of the Design of Antenna and Chip Coupling Circuits on the Performance of Textronic RFID UHF Transponders

The objectives of this study were to design, investigate, and compare different designs of coupling circuits for textronic RFID transponders, particularly focusing on magnetic coupling between an antenna and a chip. The configuration of the inductively coupled antenna module and the microelectronic module housing the chip can be varied in several ways. This article explores various geometries of coupling circuits and assesses the effects of altering their dimensions on mutual inductance, chip voltage, and the transponder’s read range. The investigation comprised an analytical description of inductive coupling, calculations of mutual inductance and chip voltage based on simulation models of transponders, and laboratory measurements of the read range for selected configurations. The results obtained from this study demonstrate that various designs of textile transponders are capable of achieving satisfactory read ranges, with some configurations extending beyond 10 m. This significant range provides clothing designers with the flexibility to select transponder designs that best meet their specific aesthetic and functional requirements.

Low temperature PECVD processes for the fabrication of integrated symmetrical resonant UV210 organic/semiconductor structures

The resonant structures used as sensors for investigating specific dark and opaque substances may pose difficulties due to their potential aggressiveness towards photonic chips and the risk of destruction upon contact. To avoid it, this study presents a detailed description of a novel symmetrical waveguide structure with UV210 enclosed between Si/SiO2 bi-layers implemented for integrated photonics. The fabrication process is thoroughly explained, accompanied by various analyses conducted for characterizations purposes. The structure is composed of an organic UV210 material developed using deep UV lithography at 248 nm and fabricated onto an oxidized silicon layer, resulting in a Si/SiO2 bi-layer configuration. This process enables the fabrication of µm-scale access waveguides and racetrack Micro-Resonators (MRs) with a 400-nanometers gap. Several multilayer families have been produced using various low-temperature PECVD processes to obtain symmetrical Si/SiO2/UV210/Si/SiO2 structures and then properly characterized using non-destructive analyses and imaging techniques. The advantage of structural symmetry is primarily related to the electromagnetism and guidance equations, which eliminate the requirement for a cut-off thickness (or frequency), enabling significant miniaturization. Additionally, the upper cladding composed of a Si/SiO2 bi-layer offers protection against potentially aggressive substances directly in contact with the organic waveguide core and MRs. Different bi-layer upper cladding families, produced under various PECVD conditions, were characterized using XPS to understand the bonding mechanism between the silicon and UV210 organic. In addition, ellipsometric analyses were conducted to determine the real and imaginary components of the refractive index of the global structure and the upper cladding bi-layer. Structure imaging were obtained by Raman analyses and optical statistical measurements were conducted on four different types of heterostructures, with silica temperatures ranging from 120°C to 150°C during the second PECVD process. The resonance analysis, performed through Free Spectral Range (FSR) measurements, allowed us to draw conclusions regarding the stability and reproducibility of the fabrication process, as well as the impact of PECVD processes conditions on the optical measurements. Such optoelectronic resonant elements and hybrid heterostructures enable the investigation of aggressive substances in direct contact.

RBFNN-based angles-only orbit determination method for non-cooperative space targets

Angles-only orbit determination during space situational awareness missions for non-cooperative targets such as space debris is subject to the well-known observability problem, that is, the orbital state is weakly observable or even unobservable because of missing range measurements. The key point to solve this problem is how to quickly capture the nonlinearity of orbit dynamics if only one space-based passive sensor is available to observe the target and translational maneuvers are not executed. To solve the short-arc angles-only problem, this study develops a simple and fast orbit determination method by exploiting the advantages of radial basis function neural network (RBFNN). Emphasis was placed on the design of the RBFNN, which was trained to construct a mapping network model from line-of-sight (LOS) measurements to the relative orbit. First, the perturbed relative orbit dynamics considering the Earth's non-spherical J2 term and air drag was established with the LOS measurement model. Second, a RBFNN-based angles-only orbit determination frame was developed, in which the generator of the training dataset, data preprocessing algorithm, and RBF network structure were designed. Finally, the proposed method was verified and tested using a set of numerical simulations of low-Earth orbit cases. The anti-noise and generalization performance of the designed network and the sensitivity of the solution accuracy to the measurement frequency and span were presented and discussed. Additionally, the advantages of the RBFNN-based method were confirmed by comparison with the results obtained using the BPNN (Back Propagation Neural Network)-based method. The simulation results show that the average orbit prediction error for LEO scenarios is approximately 0.08% using the index of initial relative distance, where only three sets of LOS angles are measured within a span of 24 s.

Development of a high-resolution, broadband spatial heterodyne Raman spectrometer based on field-widened grating-echelle structure

We propose a spatial heterodyne Raman spectrometer (SHRS) based on a field-widened grating-echelle (FWGE). A normal grating is combined with an echelle grating in a conventional spatial heterodyne spectrometer to eliminate ghost images without using masks, and prevents interference among the spatial frequencies of different diffraction orders. Mathematical expressions and derivation processes are given for the spectral parameters in the FWGE-SHRS and a verification breadboard system is fabricated. The FWGE-SHRS measures Raman spectra of single chemicals and mixed targets with different integration times, laser powers, concentrations, and transparent containers. The results of the experiments demonstrate that the FWGE-SHRS is suitable for high-resolution, broadband Raman measurements for a wide range of applications.

Dealing with Outliers in Wireless Sensor Networks Localization: An Iterative and Selection-Minimization Strategy

AbstractIn recent years, there has been considerable interest in robust range-based Wireless Sensor Network (WSN) localization due to the increasing importance of accurately locating sensors in various WSN applications. However, achieving precise localization is often hampered by the presence of outliers or underestimations in range measurements, particularly when employing the RSS technique. To tackle these issues, we introduce a Two-Step Localization (namely, the SelMin approach). In the initial phase, the approach utilizes Second-Order Cone Programming (SOCP) to minimize distance discrepancies. It does this by comparing a reference Euclidean Distance Matrix (EDM) with a weighted one derived from imprecise distances between sensor nodes. In the subsequent phase, a heuristic method is employed to identify a specific number of imprecise distances, referred to as outliers, that will be disregarded in the first phase, and this two-phase process continues iteratively. The experimental results demonstrate that the SelMin strategy performs better than the DSCL method when evaluated using the Root Mean Square Error (RMSE) metric. This superior performance is maintained even in challenging conditions, such as when there are many outliers (i.e, around 30$$\%$$ % ) in the network. This indicates that SelMin is a reliable and robust choice for these environments.

Neuro-orthopaedic check-up and walking in people with multiple sclerosis: toward a more specific assessment to improve rehabilitation results.

The rehabilitation process of people with multiple sclerosis (PwMS) is a challenge, and decision-making requires a thorough assessment to increase the chances of success in rehabilitation planning. The aim of this study was to investigate the importance of the neuroorthopaedic check-Up (NOChU) for gait prognosis. Participated in the study 105 PwMS with different levels of impairment. The NOChU includes measurements of passive range of motion (ROM), muscle strength, and spasticity. Additionally, was carried out the spatial-temporal analysis of the walking, Timed Up and Go test, and 6-min walk test. ROM remained relatively preserved to perform daily life activities except for ankle dorsiflexion. Muscle strength was also relatively preserved. Spasticity affected especially the ankle muscles, clearly the sural triceps. Among the NOChU measurements the catch seemed to have the most impact on walking on its different phases and on other activities. Accurate NOChU measurements play a crucial role in clinical settings, guiding informed decisions in rehabilitation planning. Future research endeavours could focus on exploring the correlations between NOChU deficiencies and the decline in walking capabilities among PwMS, with the goal of proposing personalized treatment strategies that address their specific requirements.

Optimal temperatures for measuring oil viscosity to restore its viscosity-temperature dependence according to the Filonov–Reynolds, Walter and Vogel–Fulcher–Tamman formulas

Relevance. Increase in the number of high-viscosity and non-Newtonian oils produced and transported. For such oils, it is important to accurately predict the rheological properties and, in particular, the viscosity-temperature dependence. Viscosity measurement for a wide range of different temperatures is excessively time-consuming and irrational, and in practice, viscosity measurement is used at two or three different temperatures and then conversion formulas are used. It is also important to clarify, which formulas and for which oils should be used to obtain the smallest error. It is important, in particular, to determine the optimal temperatures for measuring the viscosity of oil to restore its viscosity-temperature dependence. Aim. To determine the optimal temperatures for measuring oil viscosity to restore its viscosity-temperature dependence using the Filonov–Reynolds, Walter and Vogel–Fulcher–Tamman formulas, including when calculating for the entire available temperature range. Objects. Viscosity-temperature dependences of oils from the Directory of oils of the USSR. Methods. Processing the viscosity measurement data for 564 oils from the USSR Oil Directory; construction of approximating viscosity-temperature dependencies; determination of error when using the obtained dependencies, including using cross-validation. Results. The authors have calculated the error in application of the Filonov–Reynolds, Walter, Vogel–Fulcher–Tamman formulas, using over 500 oils as an example. It was found that with a random choice of temperatures for measuring viscosity, the minimum average error at another temperature for these formulas is, respectively, 13.8, 10.7 and 6.2%. The use of the Filonov–Reynolds formula is undesirable for calculating viscosity at low temperatures. The Vogel–Fulcher–Tamman formula shows the best results in calculating viscosity when using temperatures of 30–50–70 and 10–30–50°C.

Large-Dynamic-Range Ocular Aberration Measurement Based on Deep Learning with a Shack-Hartmann Wavefront Sensor.

The Shack-Hartmann wavefront sensor (SHWFS) is widely utilized for ocular aberration measurement. However, large ocular aberrations caused by individual differences can easily make the spot move out of the range of the corresponding sub-aperture in SHWFS, rendering the traditional centroiding method ineffective. This study applied a novel convolutional neural network (CNN) model to wavefront sensing for large dynamic ocular aberration measurement. The simulation results demonstrate that, compared to the modal method, the dynamic range of our method for main low-order aberrations in ocular system is increased by 1.86 to 43.88 times in variety. Meanwhile, the proposed method also has the best measurement accuracy, and the statistical root mean square (RMS) of the residual wavefronts is 0.0082 ± 0.0185 λ (mean ± standard deviation). The proposed method generally has a higher accuracy while having a similar or even better dynamic range as compared to traditional large-dynamic schemes. On the other hand, compared with recently developed deep learning methods, the proposed method has a much larger dynamic range and better measurement accuracy.

New static apparatus STAT9 for vapor pressure measurements at temperatures up to 463 K

AbstractIn this work, a state-of-the-art static apparatus for vapor pressure measurements in a temperature range of 363−463 K and a wide pressure range of 1−13,330 Pa is introduced and described. The performance of the apparatus was evaluated by a meticulous procedure of measuring the vapor pressure of five reference materials of different volatility, anthracene, benzophenone, ferrocene, naphthalene, and dibenzothiophene. The last two compounds were studied in the blind test regime, i.e., the results were compared to literature only after finishing the experiments. During benchmarking the performance of the apparatus, it was found appropriate to develop new vapor pressure equations for ferrocene and anthracene that included high-temperature data from the STAT9 apparatus. By combining the new data with previously selected vapor pressures, sublimation enthalpies, and ideal-gas and condensed phase heat capacities, we have obtained a consistent sublimation pressure equation for anthracene and ferrocene. For anthracene, the correlation procedure covered melting properties and liquid-phase vapor pressure data to support the description of the high-temperature region. The revised vapor pressure equations and sublimation enthalpies may serve as solid foundation for future research in this field.

МЕТОДИКА ІНТЕРПОЛЯЦІЇ ТА ЕКСТРАПОЛЯЦІЇ ДАНИХ ПРИ НЕРАВНОМІРНОМУ КРОКУ ЗМІНИ ПАРАМЕТРІВ ЕКСПЕРИМЕНТУ

The problem with using experimental data is the limited range and uneven measurement step for individual variables. This reduces the accuracy of determining the value of the desired function. The method of further research is to increase the number of values of the sought function based on limited experimental data. The research method involves developing a methodology for interpolation and extrapolation of experimental data using the functions of the Matlab package. The result of the investigation is that the technique allows you to create a uniform grid of reference values, fill it with the required step of changing variables, extrapolate data to the boundaries of the data space, where the influence of a given argument on the function is zero, isolate the contribution of individual arguments to the value of the function, synthesize the value of the function in new nodes reference grid of values The application of a standardized method was introduced to form a space of values of the relative rate of aging of cellulose insulation of power transformer windings as a function of temperature, humidity and oxygen access, which made it possible to increase the amount of data at least 4 times compared to the experiment.

Distinguishing ΛCDM from Evolving Dark Energy with Om Two-point Statistics: Implications from the Space-borne Gravitational-wave Detector

The Omh 2(z i , z j ) two-point diagnostics was proposed as a litmus test of the ΛCDM model, and measurements of the cosmic expansion rate H(z) have been extensively used to perform this test. The results obtained so far suggested a tension between observations and predictions of the ΛCDM model. However, the data set of H(z) direct measurements from cosmic chronometers and baryon acoustic oscillations was quite limited. This motivated us to study the performance of this test on a larger sample obtained in an alternative way. In this paper, we propose that gravitational-wave (GW) standard sirens could provide large samples of H(z) measurements in the redshift range of 0 < z < 5, based on the measurements of the dipole anisotropy of luminosity distance arising from the matter inhomogeneities of the large-scale structure and the local motion of the observer. We discuss the effectiveness of our method in the context of the space-borne DECi-herz Interferometer Gravitational-wave Observatory, based on a comprehensive H(z) simulated data set from binary neutron star merger systems. Our results indicate that in the GW domain, the Omh 2(z i , z j ) two-point diagnostics could effectively distinguish whether ΛCDM is the best description of our Universe. We also discuss the potential of our methodology in determining possible evidence for dark energy evolution, focusing on its performance on the constant and redshift-dependent dark energy equation of state.

ПРИМЕНЕНИЕ МЕДИАННОЙ ФИЛЬТРАЦИИ ДЛЯ ПОВЫШЕНИЯ КАЧЕСТВА ИЗМЕРЕНИЙ УЛЬТРАЗВУКОВЫМИ ДАТЧИКАМИ РАССТОЯНИЯ

An option has been considered to improve the quality of range measurements by ultrasonic sensors through the use of median filtering. This approach allows us to eliminate the negative feature of ultra-sonic sensors, which is that due to the characteristics of the environment in which the distance is measured, the sensor periodically determines this distance incorrectly. From a metrological point of view, this means that in a series of distance measurements, measurement results often appear that differ sharply from the rest in this series

The inner workings of sp2 clusters in nitrogen-incorporated tetrahedral amorphous carbon thin films according to optical analyses

The conduction mechanism in nitrogen-incorporated tetrahedral amorphous carbon (ta-C: N) thin films is mainly attributed to the conjugation in sp2 clusters. Here, ta-C:N thin films (about 100 nm) were deposited by laser controlled pulsed cathodic vacuum arc (Laser-Arc) at different nitrogen gas flow rates to investigate the electrical properties of such films. Mechanical and structural properties indicate an increase in sp2 fraction with a rise in nitrogen incorporation into the deposited films. However, after an initial decrease in electrical resistivity, it plateaus at higher flow rates while the sp2 content is still rising. Hence, to gain better understanding of the electronic properties, the dielectric constants ε1 and ε2 were obtained from the optical constants [n] and [k], which were numerically determined from reflectance [R] and transmittance [T] measurements in the wavelength range from 190 to 2500 nm (0.5 to 6.5 eV). The dielectric constant ε1 was used to calculate the dielectric volume of the atom, which is interpreted as a measure of the conjugated π electron system. Furthermore, modeling of the dielectric constants yielded the number of conjugated electrons per atom. Through the dielectric volume and number of conjugated electrons, it was discovered that the electrical conductivity does not only depend on the sp2 content and cluster size, but on how many electrons are conjugated and how much space these electrons occupy. The ta-C:N samples with the highest electrical conductivity, were either characterized by the largest occupied volume or the highest number of conjugated electrons.

Implementatie van de Infectierisicoscan in een ziekenhuisnetwerk door het Hospital Outbreak Support Team

Implementation of the Infection Risk Scan in a hospital network by the Hospital Outbreak Support Team The Infection Risk Scan (IRIS) assesses the quality of infection prevention and control (IPC) and antimicrobial stewardship (AMS) in a hospital ward by the standardized measurement of a broad range of quality indicators. IRIS was implemented in the geriatric wards of the 4 hospitals of the Plexus healthcare network ‘Oost-Vlaams-Brabant’ (Belgium). The goal was to compare the IPC and AMS policies of the hospitals in order to define common improvement strategies within the Hospital Outbreak Support Team (HOST), a federal project concerning IPC and AMS. In the first part of IRIS, the risk profile of the patient population is determined by a point prevalence measurement of 4 variables. In the second part, the improvement plot is created based on the measurement of 7 quality indicators. Improvement actions can be deduced from quality indicators with higher improvement potentials. The risk profiles of the 4 hospitals were highly comparable and the improvement plots showed an intermediate to high improvement potential for the use of AMT and hand hygiene compliance. There were important differences in the appropriate use of transurethral and intravascular catheters, with 2 hospitals having a low and 2 hospitals having a high improvement potential. IRIS was a useful tool in the early phase of the HOST project to benchmark the IPC and AMT policies between the Plexus hospitals and to decide what future projects could be collaborated on. As a result of IRIS, it was decided to define common care bundles for the prevention of catheter-associated urinary tract and blood stream infections and to determine hospital-specific actions with regard to the optimisation of AMS.