Photonic Radio Frequency Research Articles

Silicon photonic microresonator-based high-resolution line-by-line pulse shaping

Optical pulse shaping stands as a formidable technique in ultrafast optics, radio-frequency photonics, and quantum communications. While existing systems rely on bulk optics or integrated platforms with planar waveguide sections for spatial dispersion, they face limitations in achieving finer (few- or sub-GHz) spectrum control. These methods either demand considerable space or suffer from pronounced phase errors and optical losses when assembled to achieve fine resolution. Addressing these challenges, we present a foundry-fabricated six-channel silicon photonic shaper using microresonator filter banks with inline phase control and high spectral resolution. Leveraging existing comb-based spectroscopic techniques, we devise a system to mitigate thermal crosstalk and enable the versatile use of our on-chip shaper. Our results demonstrate the shaper’s ability to phase-compensate six comb lines at tunable channel spacings of 3, 4, and 5 GHz. Specifically, at a 3 GHz channel spacing, we showcase the generation of arbitrary waveforms in the time domain. This scalable design and control scheme holds promise in meeting future demands for high-precision spectral shaping capabilities.

A microwave photonic radio frequency memory with tunable delay resolution and Doppler frequency shift

Radar target simulation is essential for radar development. In this paper, a microwave photonic radio frequency memory (RFM) is proposed and experimentally verified. The input radio frequency (RF) signals are delayed and stored in a recirculating loop with a 4-bit binary optical true time delay line (OTTDL), which enables the achievement of the tunable delay resolution and multiple replications. The Doppler frequency shift (DFS) of the delayed signals is achieved by a Mach-Zehnder modulator (MZM) and two cascaded acousto-optic modulators (AOMs), which facilitate a wide tuning range, high precision, and a high spurious suppression ratio (SSR). The experimental results demonstrate that the system has 16 distinct delay resolutions ranging from 0.045 us to 7.576 us. Furthermore, 30 circulations are achieved in the test, indicating that the theoretical maximum storage time is approximately 225 us. Additionally, the frequency shift for 1 GHz–18 GHz RF pulse signals can be tuned over a range of 10 Hz to 10 MHz, with a SSR exceeding 40 dB.

Dual-polarization RF channelizer based on microcombs.

We report a dual-polarization radio frequency (RF) channelizer based on microcombs. Two high-Q micro-ring resonators (MRRs) with slightly different free spectral ranges (FSRs) are used: one MRR is pumped to yield soliton crystal microcombs ("active"), and the other MRR is used as a "passive" periodic optical filter supporting dual-polarization operation to slice the RF spectrum. With the tailored mismatch between the FSRs of the active and passive MRRs, wideband RF spectra can be channelized into multiple segments featuring digital-compatible bandwidths via the Vernier effect. Due to the use of dual-polarization states, the number of channelized spectral segments, and thus the RF instantaneous bandwidth (with a certain spectral resolution), can be doubled. In our experiments, we used 20 microcomb lines with ∼ 49 GHz FSR to achieve 20 channels for each polarization, with high RF spectra slicing resolutions at 144 MHz (TE) and 163 MHz (TM), respectively; achieving an instantaneous RF operation bandwidth of 3.1 GHz (TE) and 2.2 GHz (TM). Our approach paves the path towards monolithically integrated photonic RF receivers (the key components - active and passive MRRs are all fabricated on the same platform) with reduced complexity, size, and unprecedented performance, which is important for wide RF applications with digital-compatible signal detection.

Theoretical Demonstration of Improved Performance in Multi-Channel Photonic RF Signals Based on Optical Injection Locking of Optical Comb and Array Lasers

Multi-channel radio frequency (RF) signal generation, facilitated by photonic technology, offers significant potential for generating coherent signals with a high frequency and low phase noise, providing multifunctional capabilities across diverse platforms, including RF and photonic systems. Traditional methods for multi-channel photonic RF signal generation typically entail the integration of diverse optical components, such as filters and amplifiers. However, this integration often results in compromises related to power efficiency, cost-effectiveness, and implementation simplicity. To address these challenges, we propose a novel method for generating multi-channel photonic RF signals based on optical injection locking technology. This approach eliminates the necessity for traditional optical components, leading to a substantial enhancement in the performance of photonic RF signals. We present the design of an optical injection locking-based multi-channel photonic RF signal generation schematic and theoretically evaluate its Signal-to-Noise Ratio (SNR) and eye pattern performance for data modulation using the Lumerical INTERCONNECT simulator. Our results reveal a significant 1.3-dB and 3.6-dB enhancement in SNR for 30-GHz and 60-GHz signals, respectively. Furthermore, we observed an improved communication performance, as evidenced by enhanced eye patterns in 3-Gbps data transmission compared to passive photonic RF signal generation methods.

Precision Spectroscopy of Radiation Transitions between Singlet Rydberg States of the Group IIb and Yb Atoms

The measurements of microwave (μw) and radio-frequency (RF) radiation quantitative parameters may be based on the quantum–optical approach to determine the spectral characteristics of radiation transitions between the Rydberg states of atoms. Frequencies and matrix elements are calculated for dipole transitions between opposite-parity Rydberg states nL 1L and n′L±1 1L±1 (where n′= n,n±1,n±2) of the singlet series in the alkaline–earth–metal-like atoms of group IIb (Zn, Cd, Hg) and Yb. The matrix elements determine the shifts of Rydberg-state energy levels in the field of resonance μw or RF radiation, splitting the resonance of electromagnetically induced transparency (EIT) for intensely absorbed probe radiation. Numerical computations based on the single-electron quantum defect method (QDM) and the Fues’ model potential (FMP) approach with the use of the most reliable data from the current literature on quantum defect values are performed for frequencies and matrix elements of transitions between singlet Rydberg states of 1S0-, 1P1-, 1D2-, and 1F3-series in Zn, Cd, Hg, and Yb atoms. The calculated data are approximated by polynomials in the powers of the principal quantum numbers. The polynomial coefficients are determined with the use of a standard curve-fitting interpolation polynomial procedure for numerically calculated functions. These approximation expressions provide new possibilities for accurately evaluating the frequencies and matrix elements of dipole transitions between Rydberg states over a wide range of quantum numbers n >> 1, accompanied by the emission and absorption of μw and RF photons.

Rapid, high-sensitivity detection of biomolecules using dual-comb biosensing

Rapid, sensitive detection of biomolecules is important for biosensing of infectious pathogens as well as biomarkers and pollutants. For example, biosensing of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) is still strongly required for the fight against coronavirus disease 2019 (COVID-19) pandemic. Here, we aim to achieve the rapid and sensitive detection of SARS-CoV-2 nucleocapsid protein antigen by enhancing the performance of optical biosensing based on optical frequency combs (OFC). The virus-concentration-dependent optical spectrum shift produced by antigen–antibody interactions is transformed into a photonic radio-frequency (RF) shift by a frequency conversion between the optical and RF regions in the OFC, facilitating rapid and sensitive detection with well-established electrical frequency measurements. Furthermore, active-dummy temperature-drift compensation with a dual-comb configuration enables the very small change in the virus-concentration-dependent signal to be extracted from the large, variable background signal caused by temperature disturbance. The achieved performance of dual-comb biosensing will greatly enhance the applicability of biosensors to viruses, biomarkers, environmental hormones, and so on.

Wideband image-reject RF channelization based on soliton microcombs (invited paper)

Wideband radio frequency (RF) channelization is essential for the reception and detection of cross-band RF signals in various applications, including communications, radar, and spectrum sensing. However, digital channelizers are inefficient at performing RF channelization over a working bandwidth above 10 GHz. Meanwhile, current photonic RF channelizers face challenges in simultaneously considering a wideband, multi-channel, and a high crosstalk suppression ratio. In this work, we proposed and demonstrated a wideband image-reject RF channelization scheme based on integrated dual-soliton microcombs. The dual-soliton microcombs are used for RF spectral copies and heterodyne detection, respectively. Supported by image-reject mixers, the RF channelization is verified with an 8–37 GHz working bandwidth, a 1.2 GHz channel bandwidth, and 25 channels. The image suppression ratio is higher than 34 dB for single-tone signals and 20 dB for wideband signals. Our approach provides an innovative architecture of integrated photonic RF channelizers with high performance, which can benefit a wide range of RF applications by miniaturizing the systems.

High-speed silicon-integrated photonic radio frequency switch based on optical switching.

Photonic radio frequency (RF) switches are promising to replace conventional electronic RF switches in modern RF communication systems owing to their high switching speed and immunity to electromagnetic interference. However, existing photonic RF switches are generally based on frequency or polarization filtering. Thus, they require more light sources and filters to increase the number of switching channels, consequently limiting scalability. We propose a silicon-integrated photonic RF switch based on optical switching. RF signals are first modulated into the optical domain and switched through phase control of the phase shifters in the optical switch. Switching is not related to the frequency or polarization of the optical carriers, thus reducing the number of light sources required. Experimental results demonstrate 10-GHz switching of two RF signals with frequencies of 20 GHz and 30 GHz. The proposed photonic RF switch can be further expanded to form a large switch matrix, possibly contributing to the development of large-scale RF communication systems.

Four-channel all-optical wavelength conversion unit based on nonlinear effect of three-section monolithically integrated semiconductor lasers.

A simple and highly efficient four-channel all-optical wavelength conversion based on four-wave mixing effect of the directly modulated three-section monolithically integrated semiconductor laser is proposed and experimentally investigated. For this wavelength conversion unit, the spacing of the wavelength can be adjusted by tuning the bias current of the lasers and setting it to be 0.4nm (50GHz) as a demonstration is this work. A 50Mbps 16-QAM signal centers at 4-8GHz is experimentally switched to a targeted path. Up- or downconversion depends on a wavelength-selective switch, and the conversion efficiency can reach up to -2 to 0dB. This work provides a new technology for photonic radio-frequency switching matrix and contributes to the integrated implementation of satellite transponders.

Pulsed selective excitation theory and design in multiphoton MRI

Excitation in MRI is traditionally done at the Larmor frequency, where the energy of each radiofrequency photon corresponds to the energy difference between two spin states. However, if multiple radiofrequencies are employed, then multiphoton excitation can also occur when the sum or difference of multiple photon frequencies equals the Larmor frequency. Although multiphoton excitation has been known since the early days of NMR, it has been relatively unexplored in MRI. In this work, equations and principles for multiphoton selective RF pulse design in imaging are presented and experimentally demonstrated. In particular, the case where there are radiofrequency fields in both the traditional xy-direction and non-traditional z-direction is considered. To produce the z-direction radiofrequency field, an additional uniform coil was added to a clinical MRI scanner. Using this coil, two-photon slice-selective pulses were designed to be equivalent to traditional pulses, producing similar excitation, slice profiles, and in vivo images. Being the result of a combination of multiple radiofrequency fields instead of just one, two-photon pulses have more flexibility in how their parameters can be changed. Although individual multiphoton excitations are less efficient than their traditional counterparts, when the z-direction radiofrequency field is spatially non-uniform, multiple multiphoton resonances can be simultaneously used at different locations to produce simultaneous multislice excitation with the same pulse duration but less tissue heating than a naive implementation. In particular, non-uniform z-direction radiofrequency fields with negligible added tissue heating provided by oscillating the MRI scanner’s gradient fields at kilohertz frequencies were used to excite multiple slices simultaneously with less high-frequency xy-direction radiofrequency power. For an example three-slice excitation, we achieve half the xy-direction radiofrequency power compared to the naïve approach of adding three single-slice pulses. For conventional or unconventional applications, multiphoton excitation may be of interest when designing new MRI systems.

Cascaded forward Brillouin lasing in a chalcogenide whispering gallery mode microresonator

We report the first observation of cascaded forward stimulated Brillouin scattering in a microresonator platform. We have demonstrated 25 orders of intramodal Stokes beams separated by a Brillouin shift of 34.5 MHz at a sub-milliwatt threshold at 1550 nm. An As2S3 microsphere of diameter 125 µm with a quality factor of 1 × 106 was used for this demonstration. Theoretical modeling is used to support our experimental observations of Brillouin shift and threshold power. We expect our work will advance the field of forward stimulated Brillouin scattering in integrated photonics, with applications in gas sensing and photonic radio frequency sources.

Nonreciprocal conversion between radio-frequency and optical photons with an optoelectromechanical system

Nonreciprocal systems breaking time-reversal symmetry are essential tools in modern quantum technologies enabling the suppression of unwanted reflected signals or extraneous noise entering through detection ports. Here we propose a scheme enabling nonreciprocal conversion between optical and radio-frequency (rf) photons using exclusively optomechanical and electromechanical interactions. The nonreciprocal transmission is obtained by interference of two dissipative pathways of transmission between the two electromagnetic modes established through two distinct intermediate mechanical modes. In our protocol, we apply a bichromatic drive to the cavity mode and a single-tone drive to the rf resonator, and use the relative phase between the drive tones to obtain nonreciprocity. We show that perfect nonreciprocal transduction can be obtained in the limit of large cooperativity in both directions, from optical to rf and vice versa. We also study the transducer noise and show that mechanical thermal noise is always reflected back onto the isolated port. In the limit of large cooperativity, the input noise is instead transmitted in an unaltered way in the allowed direction; in particular one has only vacuum noise in the output rf port in the case of optical-to-rf conversion.

A high-Q superconducting toroidal medium frequency detection system with a capacitively adjustable frequency range >180 kHz.

We describe a newly developed polytetrafluoroethylene/copper capacitor driven by a cryogenic piezoelectric slip-stick stage and demonstrate with the chosen layout cryogenic capacitance tuning of ≈60 pF at ≈10 pF background capacitance. Connected to a highly sensitive superconducting toroidal LC circuit, we demonstrate tuning of the resonant frequency between 345 and 685kHz, at quality factors Q > 100 000. Connected to a cryogenic ultra low noise amplifier, a frequency tuning range between 520 and 710kHz is reached, while quality factors Q > 86 000 are achieved. This new device can be used as a versatile image current detector in high-precision Penning-trap experiments or as an LC-circuit-based haloscope detector to search for the conversion of axion-like dark matter to radio-frequency photons. This new development increases the sensitive detection bandwidth of our axion haloscope by a factor of ≈1000.

Multi-Band and Frequency-Agile Chip-Based RF Photonic Filter for Ultra-Deep Interference Rejection

Unwanted high-power and frequency-agile radio-frequency (RF) signals cause saturation and nonlinear distortions in sensitive RF receivers. RF notch filters with reconfigurable responses over multiple frequency bands are highly sought after to prevent these detrimental effects. Microwave photonic (MWP) notch filters have shown increased frequency agility compared to their electronic counterparts. However, demonstrated filter schemes focus only on single notch responses, leaving them unable to simultaneously attenuate multiple interferers over a wide frequency range. In this work, we demonstrate a high-performance chip-based MWP notch filter with three independent notches widely tunable over 20 GHz. The filter exhibits low RF passband losses of 8 dB and peak notch depth greater than 40 dB with 500 MHz spectral resolution. Specifically, each notch is formed through cascaded optical processing from on-chip, low-loss Si<inline-formula><tex-math notation="LaTeX">$_3$</tex-math></inline-formula>N<inline-formula><tex-math notation="LaTeX">$_4$</tex-math></inline-formula> micro-resonators and Brillouin gain on an As<inline-formula><tex-math notation="LaTeX">$_2$</tex-math></inline-formula>S<inline-formula><tex-math notation="LaTeX">$_3$</tex-math></inline-formula> photonic chip. We use this filter to demonstrate high-performance analog RF filtering by substantially attenuating multiple interferers, and show effective image rejection during RF down-conversion in a communications receiver to enable a large reduction of error vector magnitude (EVM) from 60&#x0025; to 15&#x0025;. Finally, we provide performance analysis and design perspectives for future photonic integration of the proposed filter subsystem.

Simultaneous frequency up/down converting interface based on a single hardware incorporating two phase-correlated photonic mixers.

A novel photonic frequency up/down-converting interface (FCI) with the capability of up-converting an intermediate frequency (IF) signal to a radio frequency (RF) signal and simultaneously down-converting a RF signal to a low IF signal is proposed, and a new application scenario, where both up and down frequency conversion stages of a deramp-on-receive linearly frequency modulated (LFM) continuous wave (CW) radar system are replaced by the FCI, is demonstrated. The five-port photonic FCI can be seen as two ultra-wideband phase-correlated photonic RF mixers incorporated in a single hardware, and the working frequency range of the FCI is up to Ka-band. The FCI is tested by an LFM waveform with 1GHz bandwidth in a deramp-on-receive LFM CW imaging radar system. In the test, the LFM signal can be transmitted and received correctly, and deramp output signals are able to coherently combine among multiple pulses, which generates a clear image of two point-targets with a 3dB range resolution of 15cm.

Coherent supercontinuum generation in all-normal dispersion Si3N4 waveguides.

Spectral broadening of optical frequency combs with high repetition rate is of significant interest in optical communications, radio-frequency photonics and spectroscopy. Silicon nitride waveguides (Si3N4) in the anomalous dispersion region have shown efficient supercontinuum generation spanning an octave-bandwidth. However, the broadening mechanism in this regime is usually attained with femtosecond pulses in order to maintain the coherence. Supercontinuum generation in the normal dispersion regime is more prone to longer (ps) pulses, but the implementation in normal dispersion silicon nitride waveguides is challenging as it possesses strong requirements in propagation length and losses. Here, we experimentally demonstrate the use of a Si3N4 waveguide to perform coherent spectral broadening using pulses in the picosecond regime with high repetition rate. Moreover, our work explores the formation of optical wave breaking using a higher energy pulse which enables the generation of a coherent octave spanning spectrum. These results offer a new prospect for coherent broadening using long duration pulses and replacing bulky optical components.

Optical signal denoising through temporal passive amplification

Mitigating the stochastic noise introduced during the generation, transmission, and detection of temporal optical waveforms remains a significant challenge across many applications, including radio-frequency photonics, light-based telecommunications, spectroscopy, etc. The problem is particularly difficult for the weak-intensity signals often found in practice. Active amplification worsens the signal-to-noise ratio, whereas noise mitigation based on optical bandpass filtering attenuates further the waveform of interest. Additionally, current optical filtering approaches are not optimal for signal bandwidths narrower than just a few GHz. We propose a versatile concept for simultaneous amplification and noise mitigation of temporal waveforms, here successfully demonstrated on optical signals with bandwidths spanning several orders of magnitude, from the kHz to GHz scale. The concept is based on lossless temporal sampling of the incoming coherent waveform through Talbot processing. By reaching high gain factors (&gt;100), we show the recovery of ultra-weak optical signals, with power levels below the detector threshold, additionally buried under a much stronger noise background. The method is inherently self-tracking, a capability demonstrated by simultaneously denoising four data signals in a dense wavelength division multiplexing scheme.

Broadband photonic RF channelizer with 66 channels based on acousto-optic frequency shifter

Microwave photonic channelized receiver is one of the important means to realize broadband radio frequency (RF) signal reception, and it also has great application potential in the fields of radar systems and electronic warfare. In view of the above, a microwave photonic channelizer with 66-subchannels based on acousto-optic frequency shifter (AOFS) is proposed. The 11-line optical frequency comb (OFC) used in this scheme is generated via one phase modulator. The 33 optical local oscillators can be obtained using two AOFSs to shift the frequency of 11-line OFC up and down. The 33 optical local oscillators and broadband RF signal are image-rejected and downconverted in the I / Q receiver and output by 66 subchannels with a bandwidth of 500 MHz. The simulation results verify the complete reception of 3 to 36 GHz wideband RF signal, and the spurious-free dynamic range of the system can reach 116.3 dB · Hz2/3.

Integral order photonic RF signal processors based on a soliton crystal micro-comb source

Soliton crystal micro-combs are powerful tools as sources of multiple wavelength channels for radio frequency (RF) signal processing. They offer a compact device footprint, a large number of wavelengths, very high versatility, and wide Nyquist bandwidths. Here, we demonstrate integral order RF signal processing functions based on a soliton crystal micro-comb, including a Hilbert transformer and first, second and third-order differentiators. We compare and contrast the results and the trade-offs involved with varying the comb spacing, and tap design and shaping methods.

Radio signatures from encounters between neutron stars and QCD-axion minihalos around primordial black holes

Probing the QCD axion dark matter (DM) hypothesis is extremelychallenging as the axion interacts very weakly with Standard Model particles.We propose a new avenue to test the QCD axion DM via transient radio signatures coming from encounters between neutron stars (NSs) and axionminihalos around primordial black holes (PBHs). We consider a general QCD axion scenario in which the PQ symmetry breaking occursbefore (or during) inflation coexisting with a small fraction of DM in the form of PBHs. The PBHs will unavoidably acquire around them axion minihalos with the typical length scale of parsecs. The axion density in the minihalos may be much higher than the local DM density, and the presence of these compact objects in the Milky Way today provides a novel chance for testing the axion DM hypothesis. We study the evolution of the minihalo mass distribution in the Galaxy accounting for tidal forces and estimate the encounter rate between NSs and the dressed PBHs. We find that the encounters give rise to transient line-like emission of radio frequency photons produced by the resonant axion-photon conversion in the NS magnetosphere and the characteristic signal could be detectable with the sensitivity of current and prospective radio telescopes. It would be important to investigate in detail search strategies for such signals which would provide a novel pathway for QCD axion detection.