Radio-frequency Arbitrary Waveform Generation Research Articles

Radio-frequency line-by-line Fourier synthesis based on optical soliton microcombs

Radio-frequency (RF) waveform synthesis has broad applications in ultrawide-bandwidth wireless communications, radar systems, and electronic testing. Photonic-based approaches offer key advantages in bandwidth and phase noise thanks to the ultrahigh optical carrier frequency. In this work, we demonstrate Fourier synthesis arbitrary waveform generation (AWG) with integrated optical microresonator solitons. The RF temporal waveform is synthesized through line-by-line amplitude and phase shaping of an optical soliton microcomb, which is down-converted to the RF domain through dual-comb optical coherent sampling. A variety of RF waveforms with tunable repetition cycles are shown in our demonstration. Our approach provides not only the possibility of precise Fourier synthesis at microwave and millimeter-wave frequencies, but also a viable path to fully integrated photonic-based RF AWG on a chip.

W-Band Photonic Pulse Compression Radar With Dual Transmission Mode Beamforming

Millimeter wave (MMW) sensing systems have potential for enhanced range and angular resolution in comparison to lower radio frequencies. This article employs photonic-assisted radio-frequency arbitrary waveform generation to implement a high-bandwidth multi-target MMW radar. The presented sensing system operates in the W-band using chirped RF signals, with spectra between 80 and 95 GHz at the 10 dB points. We implement sum- and difference-mode beamforming using a two element transmitter array to perform azimuth angle sensing in addition to target ranging. Photonics-based waveform generation with programmable optical pulse shapers provides for incorporation of approximately uniform phase shifts across the entire bandwidth, which in turn enables control of the far-field interference patterns of the broadband waveforms. Our approach has analogies with monopulse tracking radar techniques, in which target angle information is revealed through sum- and difference-mode processing of the receiving antennae, but with the dual-mode processing implemented at the transmitter side via photonic radio-frequency arbitrary waveform generation. Experiments with a single target demonstrate unambiguous sensing of target angle with an estimated root-mean-square error of 0.18 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">°</sup> over a ±4 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">°</sup> angular range. We also demonstrate independent sensing of the angles of two targets that are resolved in range.

Photonic RF Arbitrary Waveform Generator Based on a Soliton Crystal Micro-Comb Source

We report a photonic-based radio frequency (RF) arbitrary waveform generator (AWG) using a soliton crystal micro-comb source with a free spectral range (FSR) of 48.9 GHz. The comb source provides over 80 wavelengths, or channels, that we use to successfully achieve arbitrary waveform shapes including square waveforms with a tunable duty ratio ranging from 10% to 90%, sawtooth waveforms with a tunable slope ratio of 0.2 to 1, and a symmetric concave quadratic chirp waveform with an instantaneous frequency of sub GHz. We achieve good agreement between theory and experiment, validating the effectiveness of this approach towards realizing high-performance, broad bandwidth, nearly user-defined RF waveform generation.

Electronically controlled generation of laser pulse patterns in a synchronously pumped mode-locked semiconductor optical amplifier-fiber laser

A method for electronically controlled formation of user-defined laser pulse patterns in a synchronously pumped laser based on a semiconductor optical amplifier and an all-fiber resonator is proposed and investigated. It is demonstrated that synchronous pumping allows mode-locked operation with the laser radiation structured as an arbitrary pulse pattern repeatable on each cavity round trip. Direct electronic control of the structure and shape of the generated laser pulse patterns is implemented. The accuracy of the reproduction of modulation pulse patterns and waveforms delivered from a radiofrequency arbitrary waveform generator is examined. The time constraint on the pulse pattern formation in the steady-state mode-locked lasing regime is revealed, as well as the feasibility of the quasi-steady-state regime with on-the-lasing continuous modification of the pulse pattern structure.

Integrated Photonic Chip Enabled Simultaneous Multichannel Wideband Radio Frequency Spectrum Analyzer

Radio frequency (RF) spectrum analysis is an essential technique for monitoring signal quality in ultrahigh-speed optical transmission, broad bandwidth photonic RF arbitrary waveform generation, and for characterization of high repetition rate optical pulse sources. Whereas the intrinsic bandwidth of electronics limits its use for RF spectrum measurement of high-speed signals, a photonic approach based on ultrafast Kerr nonlinear effects can readily measure the RF spectrum of optical signals having a bandwidth beyond 1 THz. The majority of fiber-based or integrated photonic RF spectrum analyzers reported to date can monitor only one channel at a time. We demonstrate how to harness mode-selective excitation of nonlinear optical effects to perform simultaneous multichannel RF spectrum analysis using a single integrated silicon photonic device. This approach, which can be scaled to a higher number of channels, opens up a new degree of freedom for realizing multichannel signal characterization using a single integrated photonic device.

Radio-frequency arbitrary waveform generation based on dispersion compensated tunable optoelectronic oscillator with ultra-wide tunability

Photonic generation of radio-frequency (RF) arbitrary microwave waveform with ultra-wide frequency tunable range based on a dispersion compensated optoelectronic oscillator (OEO) is proposed and experimentally demonstrated. Dispersion compensation scheme and specially designed fiber Bragg grating (FBG)-based Fabry–Perot (F-P) filters are employed in the OEO loop to realize a frequency tunable range of 3.5–45.4 GHz. An optimization process provided by the combination of an erbium-doped fiber amplifier (EDFA) and FBG is employed to improve the signal-to-noise ratio (SNR) of final RF signals. The generation of linear-frequency and phase-coded microwave waveforms, with a tunable carrier frequency ranging from 4 to 45 GHz and tuned chirping bandwidths or code rates, is experimentally demonstrated.

Photonic-Assisted Error-Free Wireless Communication With Multipath Precompensation Covering 2–18 GHz

A wireless communication experiment that uses photonic-assisted radio-frequency arbitrary waveform generation (RF-AWG) for precompensation of multipath distortion over a 2-18 GHz frequency band is reported. Photonic-assisted RF-AWG is used both for spread spectrum sounding of the multipath channel and for synthesis of precompensation waveforms that yield pulse compression and distortion suppression at the receiver. By directly encoding the precompensated waveforms in optical hardware, 250 Mbit/s error-free data transmission is achieved experimentally in binary-phase-shift-keying format. For the first time to our knowledge, phase compensation and time reversal precompensation techniques are compared in hardware encoded data transmission experiments; our results confirm predictions that phase compensation outperforms time reversal under intersymbol interference limited conditions.

Recent Advances in Programmable Photonic-Assisted Ultrabroadband Radio-Frequency Arbitrary Waveform Generation

This paper reviews recent advances in photonic-assisted radio-frequency arbitrary waveform generation (RF-AWG), with emphasis on programmable ultrabroadband microwave and millimeter-wave waveforms. The key enabling components in these techniques are programmable optical pulse shaping, frequency-to-time mapping via dispersive propagation, and high-speed photodetection. The main advantages and challenges of several different photonic RF-AWG schemes are discussed. We further review some proof-of-concept demonstrations of ultrabroadband RF-AWG applications, including high-resolution ranging and ultrabroadband non-line-of-sight channel compensation. Finally, we present recent progress toward RF-AWG with increased time aperture and time-bandwidth product.

Ultrabroadband radio-frequency arbitrary waveform generation with high-speed phase and amplitude modulation capability

We introduce a novel photonic-assisted ultrabroadband radio-frequency arbitrary waveform generation setup capable of high-speed phase and amplitude modulation of the individual arbitrary waveforms. The waveform generator is based on an optical interferometer, within which a high-resolution optical pulse shaper and integrated optic phase and intensity modulators are placed, followed by frequency-to-time mapping. The phase and amplitude of each ultrabroadband waveform within the generated sequence can be continuously tuned by adjusting the driving voltages applied to the phase and intensity modulator pair, hence overcoming the slow update speed of conventional spatial light modulator-based pulse shapers. Moreover, this data modulation is completely independent from and does not interfere with RF waveform design. Programmable ultrabroadband RF sequences, spanning more than 4.7 octaves from 2 to 52 GHz, are modulated with real-time data in up to 16 level, M-ary phase-shift keying and quadrature amplitude modulation formats.

Photonic synthesis of high fidelity microwave arbitrary waveforms using near field frequency to time mapping

Photonic radio-frequency (RF) arbitrary waveform generation (AWG) based on spectral shaping and frequency-to-time mapping has received substantial attention. This technique, however, is critically constrained by the far-field condition which imposes strict limits on the complexity of the generated waveforms. The time bandwidth product (TBWP) decreases as the inverse of the RF bandwidth which limits one from exploiting the full TBWP available from modern pulse shapers. Here we introduce a new RF-AWG technique which we call near-field frequency-to-time mapping. This approach overcomes the previous restrictions by predistorting the amplitude and phase of the spectrally shaped optical signal to achieve high fidelity waveforms with radically increased TBWP in the near field region.

Programmable broadband ultra-fine resolution 2-D pulse shaping

We demonstrate a fully programmable two dimensional pulse shaper, capable of fine resolution control over a broad bandwidth. Experimental results show line-by-line shaping of frequency combs, highlighting an application in radio frequency arbitrary waveform generation.

Photonic generation of arbitrary waveforms based on incoherent wavelength-to-time mapping

We demonstrate experimentally a radio frequency arbitrary waveform generator using the incoherent wavelength-to-time mapping technique. The system is implemented by amplitude modulation of a broadband optical resource whose spectrum is reshaped by a programmable optical pulse shaper and transmitted over a single mode fiber link. The shape of the generated waveform is controlled by the optical pulse shaper, and the fiber link introduces a certain group velocity delay to implement wavelength-to-time mapping. Assisted by the flexible optical pulse shaper, we obtain different shapes of optical waveforms, such as rectangle, triangle, and sawtooth waveforms. Furthermore, we also demonstrate ultra-wideband generation, such as Gaussian monocycle, doublet, and triplet waveforms, using the incoherent technique.

Multichannel Radio-Frequency Arbitrary Waveform Generation Based on Multiwavelength Comb Switching and 2-D Line-by-Line Pulse Shaping

We demonstrate a multichannel time-multiplexed radio-frequency arbitrary waveform generator. The system combines a switching scheme of multiwavelength optical frequency combs with a novel 2-D line-by-line pulse shaper featuring broad bandwidth operation over large temporal windows. Switching times within a clock period of 200 ps among the four channels is successfully achieved. With finer pulse shaper resolution, the number of channels can be scaled up without increasing the number of switching components.

Eight-channel reconfigurable microring filters with tunable frequency, extinction ratio and bandwidth

We demonstrate an eight-channel reconfigurable optical filter on a silicon chip. It consists of cascaded microring resonators and integrated compact heaters. With an embedded Mach-Zehnder (MZ) arm coupling to a microring resonator, the important parameters of a filter such as center frequency, extinction ratio and bandwidth can be controlled simultaneously for purposes of filtering, routing and spectral shaping. Thus our device could potentially be useful in dense wavelength division multiplexing (DWDM) and radio frequency arbitrary waveform generation (RFAWG). Multichannel filter response was successfully tuned to match the International Telecommunication Unit (ITU) grid with 50, 100 and 200 GHz in channel spacing. Programmable channel selectivity was demonstrated by heating the MZ arm, and continuous adjustment of through-port extinction ratio from 0 dB to 27 dB was achieved. Meanwhile, the 3 dB bandwidth in the drop port changed from 0.12 nm to 0.16 nm. The device had an ultra-compact footprint (1200 microm x 100 microm) excluding the metal leads and contact pads, making it suitable for large scale integration.

Ultrabroad-bandwidth arbitrary radiofrequency waveform generation with a silicon photonic chip-based spectral shaper

Ultrabroad-bandwidth radiofrequency pulses offer significant applications potential, such as increased data transmission rate and multipath tolerance in wireless communications. Such ultrabroad-bandwidth pulses are inherently difficult to generate with chip-based electronics due to limits in digital-to-analog converter technology and high timing jitter. Photonic means of radiofrequency waveform generation, for example, by spectral shaping and frequency–time mapping, can overcome the bandwidth limit in electronic generation. However, previous bulk optic systems for radiofrequency arbitrary waveform generation do not offer the integration advantage of electronics. Here, we report a chip-scale, fully programmable spectral shaper consisting of cascaded multiple-channel microring resonators, on a silicon photonics platform that is compatible with electronic integrated circuit technology. Using such a spectral shaper, we demonstrate the generation of burst radiofrequency waveforms with programmable time-dependent amplitude, frequency and phase profiles, for frequencies up to 60 GHz. Our demonstration suggests potential for chip-scale photonic generation of ultrabroad-bandwidth arbitrary radiofrequency waveforms.

Time-multiplexed photonically enabled radio-frequency arbitrary waveform generation with 100 ps transitions

For the first time, to our knowledge, radio-frequency arbitrary waveforms are time-multiplexed within 100 ps by integrating wavelength switching, optical frequency comb generation, and spectral line-by-line shaping. The novel time-multiplexed scheme demonstrated here can be extended to wide user specifications and faster waveform transition time.