Radiative Heat Exchange Research Articles

Practical considerations for using personal cooling garments for heat stress management in physically demanding occupations: A systematic review and meta-analysis using realist evaluation.

Due to rising temperature extremes, workplaces are seeking new solutions, such as using personal cooling garments (PCG) to mitigate and manage workplace heat exposure. This systematic review sought to assess the physiological and perceptual effects of PCGs on workers in standard work clothing performing moderate-to-heavy intensity tasks in hot environments. A peer-reviewed search strategy was conducted in MEDLINE, Embase, CINAHL, Scopus, Global Health, and Business Source Complete with no language or time limits. A meta-analysis using a realist evaluation framework was then performed to evaluate the effectiveness of the PCGs. Thirty-three studies with 764 participants (98% male; average 21 ± 34 participants per study), conducted primarily in a laboratory setting (76%) were included. The studies were 193 ± 190 min in duration and consisted of a moderate-to-heavy work effort of 3.3 ± 1.0 METs in hot ambient conditions (temperature: 35.9 ± 3.3°C, 51.4 ± 12.1% relative humidity, wet bulb globe temperature [WBGT] 31.2 ± 2.6°C). The PCGs (n = 67) facilitated heat exchange through conduction (n = 39), evaporation (n = 4), convection (n = 2), radiation (n = 2), or hybrid combinations (n = 20). Conductive and hybrid PCGs offered the greatest thermoregulatory benefit, whereby core temperature (Tc) and heart rate (HR) reductions were consistently observed (Conductive: Tc: -0.3°C, HR: -12 bpm; Hybrid: Tc::-0.2°C, HR: -10 bpm), while PCGs directed at enhancing evaporative and radiative heat exchange had no or minimal effect on the physiological outcomes assessed (i.e., TC < 0.1°C, HR: <0.7 bpm). While the PCGs had a positive overall effect, conductive options offered the most consistent benefit to workers. WBGT, clothing insulation, and duration of wear significantly affected some physiological and perceptual outcomes.

Research and prediction of early-age loads in double-block ballastless track structure

Considering the hydration reaction of cement, a finite element model(FEM) of the coupling of temperature and humidity field and chemical field in the early age of the double-block ballastless track structure was established, and a field monitoring test on the early age of track slab was carried out with the newly constructed Fuzhou-Xiamen high-speed railway line as a case to verify the correctness of the FEM. Based on the official meteorological data from China Meteorological Administration (CMA) and the FEM, the dataset of vertical temperature and humidity gradients in the early age of the track slab was constructed, and five machine learning training models, namely, machine learning (MLR), multivariate polynomial regression (MPR), support vector regression (SVR), random forest (RF), and gradient boosted regression (GBR), were adopted to train the temperature gradient model and humidity gradient model for the early age of the track slab. The research results show that: (1) under the combined effect of solar radiation, convective heat transfer, radiative heat exchange and the cement hydration reaction, the temperature loading leads to the susceptibility of the sleepers to diagonal cracking; the humidity loading leads to transverse cracking in the center region of the surface of the track slab; (2) the finite element model with a higher accuracy provided the training dataset for the machine learning model. According to the Spearman correlation coefficient, the input features of the temperature gradient model and the humidity gradient model are determined, respectively; (3) Five ML methods were used to train the temperature gradient model and humidity gradient model, both of which demonstrated good generalization ability with a coefficient of determination(R2) greater than 0.85. Among these methods, GBR and SVR exhibited the best performance; From the perspective of MAPE value, the prediction effect of the temperature gradient training model was better than that of the humidity gradient training model; (4) The curing method and the average value of the relative humidity were the important input features influencing the training models for the temperature and humidity gradient loads, respectively. This finding provided an important guideline for the construction of ballastless track structures.

Building a model of oil tank water cooling in the case of fire

The object of this study is the process of liquid combustion in spillage, and the subject is the temperature distribution along the wall of a vertical steel tank when it is heated under the thermal influence of fire and cooled by water. A system of equations describing the water cooling of the wall of a vertical steel tank under the conditions of the thermal effect of a fire spilling a flammable liquid has been constructed. The system consists of a heat balance equation for the tank wall, a heat balance equation for the water film flowing over the wall, and a mass balance equation for the water film. The equations take into account the radiative heat exchange with the flame, the environment, the internal space of the tank, as well as the convective heat exchange with the surrounding air, the vapor-air mixture, and the liquid inside the tank, as well as between the water film and the wall. The joint solution to the system of equations makes it possible to determine the temperature distribution along the tank wall and the water film at an arbitrary time point, as well as to determine the thickness and flow rate of the water film at a certain point. The finite difference method was used to solve the system of heat and mass balance equations. It is shown that the insufficient intensity of water supply for cooling leads to boiling of water from the film, as a result of which the wall temperature in such areas can reach 300 °C. A delay in the supply of water, even with sufficient intensity, could lead to the establishment of a film-like mode of boiling. In such a situation, the water film is thrown away from the wall, as a result of which the part of the wall below the film boiling zone remains without cooling. The practical significance of the built model is the possibility of determining the necessary intensity of water supply for cooling the tank and the limit time for the start of cooling

Efficient Computation of Radiative Heat Recovery from Porous Ceramic Monoliths for Efficient Solar Thermochemical Fuel Production

Solar thermochemical hydrogen (STCH) produced by heat-driven water-splitting is a promising route for producing green hydrogen and other zero-emission synfuels. However, the efficiency of STCH must be dramatically increased for it to make an impact on decarbonization efforts. We have previously presented a novel Reactor Train System (RTS) for significantly increasing the efficiency of STCH by employing heat recovery from the redox material and efficient gas exchange processes. In this paper we present a higher-fidelity model for the RTS that accommodates the slow heat diffusion through the STCH redox material. For this purpose, a novel method is introduced for transient modelling of radiative heat in participating media. This method, called GREENER: Generalized Radiation Exchange Factors and Net Radiation, combines the accuracy of Monte Carlo Ray Tracing with the low computational cost of the P1 or Rosseland diffusion approximations. Along with STCH, GREENER has application for modelling volumetric solar receivers, high temperature heat recovery systems like heat exchangers and regenerators, and packed bed reactors. Using the GREENER method, the RTS counterflow radiative heat exchanger is shown to achieve heat recovery effectiveness greater than 70%. The performance of non-uniform porous redox morphologies is evaluated, and high-performing configurations are identified.

The Abrikosov vortex structure revealed through near-field radiative heat exchange

The Abrikosov lattice is a property of type II superconductors in which normal and superconducting carriers coexist and arrange in a regular pattern. Here, we address the question on whether vortex matter, particularly the Abrikosov lattice, influences the local thermal properties of high-temperature superconductors. We find that their optical properties are not only dictated by the order parameter, but also that the near-field radiative heat flux acquires a periodic spatial structure inherited from the Abrikosov lattice. Surprisingly, we predict a radial displacement of the heat flux maxima with respect to the vortexes cores, for temperatures well below the critical one.

Tomography of near-field radiative heat exchange between mesoscopic bodies immersed in a thermal bath

Tomography of near-field radiative heat exchange between mesoscopic bodies immersed in a thermal bath

RESEARCH OF THE DESTRUCTION CONDITIONS OF GLAZING OF ENCLOSING STRUCTURES UNDER THE CONDITIONS OF THERMAL INFLUENCE OF FIRE

The article presents the main results of mathematical modelling of the destruction of glazing of enclosing building structures with translucent elements under fire conditions. The authors analyse literature data on calculating the fire resistance of enclosing building structures with glazing. The results show that improving methods for predicting the fire resistance of glazing is relevant. Mathematical models for the numerical study of the behaviour of glazing under the thermal influence of the standard fire temperature regime are substantiated. Mathematical models of the heat transfer process involve using a non-stationary differential equation of heat conduction with boundary conditions of the third kind, accounting for the convective and radiant heat exchange between the air in the room with the fire and the glazing. As a criterion for the destruction of glazing under the influence of fire, the authors establish the temperature resistance parameter, which is determined based on the mechanical characteristics of the glass. The article highlights the relevant data on the study of temperature indicators and the mechanism of glazing failure, using mathematical modelling with well-founded mathematical models. It obtains the results of the thermal calculation by applying the finite difference method for solving the non-stationary differential equation of thermal conductivity. The methodology for determining the time of glazing failure under the influence of the standard temperature regime of a fire using the calculation parameters obtained based on well-founded mathematical models is substantiated. An analysis of the adequacy of the obtained calculation data was carried out by comparing them with the results of experimental studies using statistical criteria. As a result of the analysis, the authors confirmed the validity of the calculation data. A complete factorial experiment was conducted based on well-founded mathematical models, which revealed the regularities of the dependence of the parameters of thermomechanical processes in single-layer glass on its structural characteristics. The revealed regularities have the form of linear regression dependences of the destruction time on the thickness of the glazing and the maximum length of the glass panel without bars. Using the regularities of the dependence of the parameters of thermomechanical processes in single-layer glazing on its structural characteristics, the authors constructed reference tables for evaluating the fire resistance of enclosing structures with glazing. The research obtained new scientific data on the study of the behaviour of glazing of enclosing building structures under the thermal influence of fire through mathematical modelling, which is the basis for improving the methods of calculating the fire resistance of enclosing structures with translucent elements. Keywords: enclosing building structures, glazing, fire resistance limit, calculation method, glass heat resistance.

Building a model of heating an oil tank under the thermal influence of a spill fire

The object of this study is the process of liquid combustion in a spill, and the subject of research is the distribution of temperature along the wall and roof of a vertical steel tank that is heated under the thermal influence of a spill fire. The heat balance equation for the wall and roof of the tank with oil product was constructed. The assumption of a small thickness of the wall and roof of the tank relative to its linear dimensions makes it possible to move to two-dimensional differential equations of the parabolic type. The equations take into account the radiative heat exchange with the flame, the environment, the internal space of the tank, as well as the convective heat exchange with the surrounding air, the vapor-air mixture, and the liquid inside the tank. Using the methods of similarity theory, estimates of the coefficients of convection heat exchange of the outer surface of the tank with the surrounding air and the inner surface with the vapor-air mixture and liquid in the tank in the conditions of free convection were constructed. The application of the finite difference method for solving the heat balance equations has made it possible to derive the temperature distribution on the surface of the tank at an arbitrary moment in time. It is shown that the value of the coefficient of convection heat exchange of the liquid exceeds the corresponding value for the air-vapor mixture by (1÷2) orders of magnitude. As a result, the part of the wall located below the oil product level is heated to a temperature of (80÷230) °C depending on the viscosity of the liquid. This occurs despite the fact that the value of the mutual radiation coefficient reaches its maximum value at the lower part of the wall. From a practical point of view, this means that the part of the wall above the level of the oil product in the tank can reach dangerous temperature values, and it should be cooled first. The constructed model of tank heating also enables determining the limit time for the start of cooling of the tank.

Determining cold strain in cold air: a comparison of two methods of partitional calorimetry to calculate heat storage and debt in cold air with mild hypothermia.

We compared two methods of partitional calorimetry to calculate heat storage and heat debt during cold air (0°C) exposure causing mild core cooling. Twelve participants performed a 5 min baseline in thermoneutral conditions (∼22.0°C, ∼50% relative humidity) followed by cold air exposure (∼0°C) until rectal temperature was reduced by ∆-0.5°C. Partitional calorimetry was used to calculate avenues of heat exchange (radiative, convective, and evaporative), heat storage, and heat debt continuously throughout cold exposure. We compared deriving these variables using prediction equations based on environmental and participant characteristics (PCALEquation Method) versus using measurement tools such as humidity sensors and heat flux discs (PCALHeat Flux Method). There were significant differences between methods (all p≤0.001) for determining heat exchange, heat storage, and heat debt. At ∆-0.5°C, PCALHeat Flux Method had greater levels of radiative and convective heat exchange (PCALHeat Flux Method: -143.0±16.8 W∙m2 vs PCALEquation Method: -123.0±12.9 W∙m2, p≤0.001), evaporative heat exchange (PCALHeat Flux Method: -9.0±1.7 W∙m2 vs PCALEquation Method: -4.1±0.0 W∙m2, p≤0.001), heat storage (PCALHeat Flux Method: -15.0±31.0 W∙m2 vs PCALEquation Method: +6.0±25.9 W∙m2, p=0.020), and heat debt (PCALHeat Flux Method: -692.0±315.0 kJ vs PCALEquation Method: -422.0±136.0 kJ, p≤0.001). Overall, this study found the largest discrepancies between the two methods were when the environmental conditions and skin temperature were in high flux, as well as when core temperature was reduced by ∆-0.5°C. The use of PCALHeat Flux Method may be more advantageous to use in the cold to provide a higher resolution measurement of cold strain.

Hot-carrier thermophotovoltaic systems

A thermophotovoltaic (TPV) energy converter harnesses thermal photons emitted by a hot body and converts them to electricity. When the radiative heat exchange between the emitter and photovoltaic cell is spectrally monochromatic, the TPV system can approach the Carnot thermodynamic efficiency limit. Nonetheless, this occurs at the expense of vanishing extracted electrical power density. Conversely, a spectrally broadband radiative heat exchange between the emitter and the cell yields maximal TPV power density at the expense of low efficiency. By leveraging hot-carriers as a means to mitigate thermalization losses within the cell, we demonstrate that one can alleviate this trade-off between power density and efficiency. Via detailed balance analysis, we show analytically that one can reach near-Carnot conversion efficiencies close to the maximum power point, which is unattainable with conventional TPV systems. We derive analytical relations between intrinsic device parameters and performance metrics, which serve as design rules for hot-carrier-based TPV systems.

Review on convective and radiation heat transfer between bridges and external environments

The heat exchange between bridges and external environments is the primary cause of the temperature effect on bridges. The complexity of the two-phase (gas–solid) heat transfer mechanism, the diversity of the surface characteristics of bridge materials, and the uncertainties of the environment in which bridges are located make the numerical calculation of the heat exchange between bridges and external environments difficult. Several studies have been conducted by scholars around the world. In this work, the research on convective and radiative heat exchange between bridges and external environments is surveyed, analyzed, and summarized. The influencing factors and calculation methods of bridge temperature are examined, and the convective heat transfer and radiation mechanisms, theoretical calculations, and experimental measurement methods used to investigate the relation between bridges and external environments are summarized and analyzed. The value determination methods for convective heat transfer and radiation absorption coefficients in the calculation of the bridge temperature field are summarized. In addition, the problems and shortcomings of current research are evaluated, and future research directions are identified and discussed.

Analysis of night behavior and negative running for PVT system

High absorption of PV benefits heat collection in the daytime, but the heat loss to the space/environment because of its high emissivity also should be noticed. Although there are many papers investigating PVT, few of them cover the night behavior and negative running during late afternoon. This paper supplements detailed studies on related content to draw people's attention to the night and late-afternoon operation that helps better strategy establishment and less heat loss. From experiments, the clouds help hinder the PV radiant heat exchange with space. Under clear night, the PV bottom temperature can be 6.88 °C lower than air temperature and the water tank's bottom temperature drops 2.8 °C. Because of the fluid viscosity, no apparent temperature stratification and flow occur in the PVT water pipe, causing even PV temperature. The higher the water temperature, the easier the negative running occurs during late afternoon, although the irradiation is still high at 521W/m2. Heat loss power and energy are −199W and 1791 KJ from 15:10 to 17:40. Based on different regressed linear correlations of different PVT systems, the effect of water temperature, irradiation, and ambient temperature on the negative performance is also comparatively studied.

CFD design and optimization of a multi-probe device for temperature measurements in Waste-to-Energy plants

The temperature of exhaust gases is an essential parameter to monitor in Waste-to-Energy (WtE) plants, since it significantly affects energy efficiency, pollutant emissions and materials’ integrity. Current methods for monitoring gas temperature in such plants (i.e., thermocouples, infrared pyrometers, and aspirated thermocouples) exhibit shortcomings in both accuracy and reliability when used in environments where radiative heat exchange plays an important role. In previous research, by means of Computational Fluid Dynamics (CFD) simulations, the authors designed a new multi-probe device, with the aim of mitigating the issues associated with these commonly adopted techniques. The newly designed measuring device is herein further characterized by means of multi-region CFD simulations, to investigate any local thermal-fluid dynamics effects which may impair the measurement, due to the mutual influence of the ducts where the sensors are located. Results have shown that the mutual influence is not significant, confirming the validity of the designed shape.

Complex heat exchange in brake friction pairs

In the article, the following issues are considered: general principles of complex heat transfer in friction pairs of brake devices; radiant heat exchange from the rough surfaces of the metal friction elements of the brakes; the combined action of the fields of thermal conductivity and radiation in the metal friction elements of the brakes. The role of the thermal and dynamic boundary layers resulting from air-washing of metal brakes with open friction pairs and their effect on cooling is discussed. A new relationship between the Biot and Nusselt criteria is shown, which is presented in the form of thermal resistances of the surface and near-surface layers of the brake pulley rim. A comparison of the combined action of the fields of thermal conductivity and radiation in the metal friction elements of the brakes showed that the radiation efficiency is 1.5–1.7 W·m–2 times higher than the thermal conductivity. Radiation efficiency is the ratio of the power of the heat flux to the unit area through which the heat flux passes.

A correlation to calculate time constant of thermocouples

A time constant is the dynamic response time of a thermocouple measuring unsteady flow fields. The measured temperature of a thermocouple is the bead temperature, which is determined by the energy conservation of the bead. Heat transfer of the bead includes convective and radiative heat exchange with the flow, heat conduction with the wires, and surface radiation with the environment. These heat transfer modes affect both the bead temperature and its time constant. The novelty of the paper is to derive a correlation for calculating the time constant of a thermocouple based on the bead energy conservation, covering a wide range of conditions and explicitly reflecting the contribution of surface radiation and conduction. The correlation involves the parameter β related to surface radiation and the parameter cl related to conduction. The correlation for β is obtained by fitting the time constant of small beads in the flows with step change parameters using CFD simulations, while the parameter cl is obtained by fitting the time constant of thermocouples under varying flow conditions using CFD simulations. The relative errors between the calculated time constants with the correlation and those of the CFD simulations are less than 19%. The CFD simulations indicate that the time constants considering radiation and conduction are 33–49% of those considering only the effect of convection for the tested cases. The S type and K type thermocouples were used to measure the standard Hencken flames. By applying current loads and then removing them, the dynamic response curves and the time constants of the thermocouples are obtained. The maximum errors between the calculated time constants with the correlation and the experimental values are less than 10%.

Analyzing thermophoresis phenomenon in a transient free convective MHD chemically radioactive fluid over oscillatory permeable media

A numerical observation of chemically radioactive free convective magneto hydrodynamics fluid passing through a vertical permeable medium with fluctuating mass and heat transfer with thermophoresis is studied here. The fluid type is assumed to be a suspended mixture of particles that are incompressible, chemically strong, ionized, and viscous with some mass infusibility. The model pertaining to this problem is resolved through the application of a highly stable implicit finite difference method. The method is used for small and large deflections of the physical parameters, which result in a noticeable fluid flow behavior depicted graphically. The momentum, energy, concentration, skin friction, Nusselt and Sherwood number are investigated for various factors such as the thermophoresis effect, magnetic field, permeability, and chemical reaction rate. The substantial findings of the present investigation indicate that the impact of thermophoresis is more pronounced in the diffusion of concentration as compared to the rate of chemical reactions. The concentration is considerably influenced by the permeability parameter, surpassing the influence of the chemical reaction rate. For higher radiation parameters and Prandtl number, the molecular interaction of liquids increases, which in turn constrains the extent of radiative heat exchange.

Development of a simplified cool coating thermal model for predicting street canyon air temperature

Thermal environment within a typical street canyon can be represented by the heat exchange interactions between the microclimate and built-up urban fabric elements, consisting of walls, roofs and pavement surfaces. Morphology of these elements, material thermophysical and surface solar radiation characteristics under the prevalent weather conditions determine heat storage, convective as well as radiative heat exchanges within the street canyon. Predicting these heat transfer mechanisms using thermal model can facilitate assessing air temperature within the street canyon. Therefore, in this study, an easy-to-use resistance capacitance based thermal model is developed and verified using real-scale experimental measurements under the tropical climate of Singapore. Furthermore, the impact of increased solar reflectance of walls and the driveway surfaces (by application of cool coating) on the street canyon air temperature is predicted. Increasing the solar reflectance of wall from 0.5 to 0.8 and driveway from 0.2 to 0.7 can reduce the peak air temperature up to 1.70°C and daily mean air temperature up to 0.85°C as observed in this study. The results of the proposed cool coating thermal model can be used in early-stage design by the designers and planners for assessing the thermal impact of cool coating implementation on the street canyon surfaces under any weather conditions.

Implications of heat exchange for a free-living endangered marsupial determined by non-invasive thermal imaging.

We used thermal imagining and heat balance modelling to examine the thermal ecology of wild mammals, using the diurnal marsupial numbat (Myrmecobius fasciatus) as a model. Body surface temperature was measured using infra-red thermography at environmental wet and dry bulb temperatures of 11.7-29°C and 16.4-49.3°C, respectively; surface temperature varied for different body parts and with environmental temperature. Radiative and convective heat exchange varied markedly with environmental conditions and for various body surfaces reflecting their shapes, surface areas and projected areas. Both the anterior and posterior dorsolateral body areas functioned as thermal windows. Numbats in the shade had lower rates of solar radiative heat gain but non-solar avenues for radiative heat gain were substantial. Radiative gain was higher for black and lower for white stripes, but overall, the stripes had no thermal role. Total heat gain was generally positive (<4 to >20W) and often greatly exceeded metabolic heat production (3-6W). Our heat balance model indicates that high environmental heat loads limit foraging in open areas to as little as 10min and that climate change may extend periods of inactivity, with implications for future conservation and management. We conclude that non-invasive thermal imaging is informative for modelling heat balance of free-living mammals.

Investigation of the thermal analysis of a wavy fin with radiation impact: an application of extreme learning machine

The combined impact of radiation and convection on the heat transfer of a wavy fin is scrutinized in the present analysis. The novelty of this research work is that it proposes a deterministic machine learning model known as an extreme learning machine to address the heat transfer problem of a wavy fin. The effect of radiation on convective heat transfer and the Rosseland approximation for the radiation heat exchange have been considered in the investigation. The nonlinear ordinary differential equation (ODE) is converted to its nondimensional form using the appropriate dimensionless variables. Runge-Kutta-Fehlberg's fourth-fifth order technique (RKF 45) is used to solve the nondimensional ODE numerically. The roles of convection-conduction, radiation-conduction, thermal conductivity, and radiation parameters have been discussed for satisfying a prescribed temperature distribution in rectangular and wavy fins with graphical visualization. A rise in convection-conduction and radiation-conduction variables decreased the thermal distribution of both the wavy fin and rectangular fin. Further, ANSYS simulation analyzes the variation of temperature and total heat flux in both rectangular and wavy fins. The study demonstrates the effectiveness of the model selected through the obtained results, which indicate the potential of the regression model for providing an accurate prediction.

Assessing the impact of wet and dry flue gas recycling on heat transfer in oxygen-fired circulating fluidized bed furnaces

Oxygen-driven circulating fluidized bed combustion (oxy-CFB) has been suggested as a potential technique for facilitating carbon capture in large-scale power generation. Precise modeling of radiative heat transfer is vital for forecasting the thermal performance of such processes. This research examines the impact of wet and dry flue gas recycling on the thermal behavior of a large-scale oxy-CFB furnace, utilizing a combined modeling strategy that merges a three-dimensional furnace process model with a thermal radiation solver. The semi-empirical furnace model operates in steady-state conditions, accounting for fluid dynamics, reactions, and heat transfer phenomena. The radiation solver, based on the zone method, employs novel correlations for radiative heat exchange between optically thick zones. The radiation solver employs a weighted sum of the gray gases model, developed specifically for oxy-combustion, and geometric optics to determine the radiative characteristics of combustion gases and particles, respectively.This research covers various process conditions and boiler loads to evaluate the influence of wet versus dry flue gas recycling on heat transfer and temperature profiles. Model results were successfully compared against small-scale oxygen-fired CFB tests and large-scale measurements in a supercritical air-fired CFB. Utilizing an external radiation solver allows for a more precise representation of radiative heat transfer and the influence of varying process conditions. The insights from this research can aid in the design of large-scale oxy-CFB facilities, and the demonstrated modeling approach can be employed for additional model development, such as integrating the external radiation solver with other modeling tools.