Radial Spin Research Articles

Efficient 3D cone trajectory design for improved combined angiographic and perfusion imaging using arterial spin labeling.

To improve the spatial resolution and repeatability of a non-contrast MRI technique for simultaneous time resolved 3D angiography and perfusion imaging by developing an efficient 3D cone trajectory design. A novel parameterized 3D cone trajectory design incorporating the 3D golden angle was integrated into 4D combined angiography and perfusion using radial imaging and arterial spin labeling (CAPRIA) to achieve higher spatial resolution and sampling efficiency for both dynamic angiography and perfusion imaging with flexible spatiotemporal resolution. Numerical simulations and physical phantom scanning were used to optimize the cone design. Eight healthy volunteers were scanned to compare the original radial trajectory in 4D CAPRIA with our newly designed cone trajectory. A locally low rank reconstruction method was used to leverage the complementary k-space sampling across time. The improved sampling in the periphery of k-space obtained with the optimized 3D cone trajectory resulted in improved spatial resolution compared with the radial trajectory in phantom scans. Improved vessel sharpness and perfusion visualization were also achieved in vivo. Less dephasing was observed in the angiograms because of the short TE of our cone trajectory and the improved k-space sampling efficiency also resulted in higher repeatability compared to the original radial approach. The proposed 3D cone trajectory combined with 3D golden angle ordering resulted in improved spatial resolution and image quality for both angiography and perfusion imaging and could potentially benefit other applications that require an efficient sampling scheme with flexible spatial and temporal resolution.

Diversity of radial spin textures in chiral materials

Diversity of radial spin textures in chiral materials

Tunable Circular Photogalvanic and Photovoltaic Effect in 2D Tellurium with Different Chirality.

Chirality arises from the asymmetry of materials, where two counterparts are the mirror image of each other. The interaction between circular-polarized light and quantum materials is enhanced in chiral space groups due to the structural chirality. Tellurium (Te) possesses the simplest chiral crystal structure, with Te atoms covalently bonded into a spiral atomic chain (left- or right-handed) with a periodicity of 3. Here, we investigate the tunable circular photoelectric responses in 2D Te field-effect transistors with different chirality, including the longitudinal circular photogalvanic effect induced by the radial spin texture (electron-spin polarization parallel to the electron momentum direction) and the circular photovoltaic effect induced by the chiral crystal structure (helical Te atomic chains). Our work demonstrates the controllable manipulation of the chirality degree of freedom in materials.

A catalogue of high-mass X-ray binaries in the Galaxy: from the INTEGRAL to theGaiaera

Context.High-mass X-ray binaries (HMXBs) are a particular class of high-energy sources that require multi-wavelength observational efforts to be properly characterised. New identifications and the refinement of previous measurements are regularly published in the literature by independent teams of researchers and might, when they are collected in a catalogue, offer a tool for facilitating further studies of HMXBs.Aims.We update previous instances of HMXB catalogues in the Galaxy and provide the community easy access to the most complete set of observables on Galactic HMXBs. In addition to the fixed version that is available in Vizier, we also aim to host and maintain a dynamic version that can be updated upon request from users. Any modification will be logged in this version.Methods.Using previous HMXB catalogues supplemented by listings of hard X-ray sources detected in the past 20 yr, we produced a base set of HMXBs and candidates by means of identifier and sky coordinate cross matches. We queried in Simbad for unreferenced HMXBs. We searched for as many hard X-ray, soft X-ray, optical, and infrared counterparts to the HMXBs as we could in well-known catalogues and compiled their coordinates. Each HMXB was subjected to a meticulous search in the literature to find relevant measurements and the original reference.Results.We provide a catalogue of 152 HMXBs in the Galaxy with their best known coordinates, the spectral type of the companion star, systemic radial velocities, component masses, orbital period, eccentricity, and spin period when available. We also provide the coordinates and identifiers for each counterpart we found from hard X-rays to the near-infrared, including 111 counterparts from the recentGaiaDR3 catalogue.

Generalized Poincaré Beams in Tight Focus

We study the tight focus of generalized (hybrid) Poincaré beams. A conventional Poincaré beam is a coaxial superposition of two optical vortices, one with left circular polarization and a topological charge (TC) of m, while the other has a right circular polarization and a TC of −m. The generalized Poincaré beams are also composed of two optical vortices, but their TCs are different, for instance, p and q. Here, we theoretically investigate the generalized Poincaré beams with the TCs p = m + 1 and q = −m in tight focus. In this case, both transverse components of the strength vector of the initial electric field have a topological charge of 1/2, and the beam itself is a cylindrical vector beam of fractional order m + 1/2. Analytical expressions are derived for the components of the strength vectors of the electric and magnetic field at the focus as well as for the intensity distribution, the longitudinal component of the spin angular momentum (SAM), and for the components of the Poynting vector (energy flow density). We show that the intensity at the focus has 2m − 1 local maxima residing evenly in a certain circle radius with the center on the optical axis. We also demonstrate that the radial spin and orbital Hall effects occur at the focus, i.e., the longitudinal SAM component has different signs in the circles of different radii, and the azimuthal component of the transverse Poynting vector also has different signs.

Flat-Top Focal Spot and Polarization Conversion Obtained in Tightly Focused Circularly Polarized Light

In this paper, using the Richards–Wolf equations, the focusing of circularly polarized light with flat diffractive lenses is considered. It is shown that, as the numerical aperture (NA) of the lens increases, the size of the focal spot first decreases and then begins to grow. The minimum focal spot is observed at NA = 0.96 (FWHM = 0.55 λ). With a further increase in the numerical aperture of the lens, the growth of the longitudinal component leads to an increase in the size of the focal spot. When a flat diffractive lens is replaced by an aplanatic lens, the size of the focal spot decreases monotonically as the numerical aperture of the lens increases. In this case, the minimum focal spot will be FWHM = 0.58 λ and, with a larger numerical aperture, NA = 0.99. We also reveal that, at the focus of a circularly polarized laser beam, different radius circles are observed to be centered on the optical axis, where polarization vectors rotate oppositely (clockwise and anticlockwise). This phenomenon of radius-dependent ‘spin’ separation may be interpreted as a manifestation of the radial spin Hall effect at the focus.

Optimization of 4D combined angiography and perfusion using radial imaging and arterial spin labeling.

To extend and optimize a non-contrast MRI technique to obtain whole head 4D (time-resolved 3D) qualitative angiographic and perfusion images from a single scan. 4D combined angiography and perfusion using radial imaging and arterial spin labeling (CAPRIA) uses pseudocontinuous labeling with a 3D golden ratio ("koosh ball") readout to continuously image the blood water as it travels through the arterial system and exchanges into the tissue. High spatial/temporal resolution angiograms and low spatial/temporal resolution perfusion images can be flexibly reconstructed from the same raw k-space data. Constant and variable flip angle (CFA and VFA, respectively) excitation schedules were optimized through simulations and tested in healthy volunteers. A conventional sensitivity encoding (SENSE) reconstruction was compared against a locally low rank (LLR) reconstruction, which leverages spatiotemporal correlations. Comparison was also made with time-matched time-of-flight angiography and multi-delay EPI perfusion images. Differences in image quality were assessed through split-scan repeatability. The optimized VFA schedule (2-9°) resulted in a significant (p < 0.001) improvement in image quality (up to 84% vs. CFA), particularly for the lower SNR perfusion images. The LLR reconstruction provided effective denoising without biasing the signal timecourses, significantly improving angiographic and perfusion image quality and repeatability (up to 143%, p < 0.001). 4D CAPRIA performed well compared with time-of-flight angiography and had better perfusion signal repeatability than the EPI-based approach (p < 0.001). 4D CAPRIA optimized using a VFA schedule and LLR reconstruction can yield high quality whole head 4D angiograms and perfusion images from a single scan.

Poincaré Beams at the Tight Focus: Inseparability, Radial Spin Hall Effect, and Reverse Energy Flow

The family of Poincaré beams has three parameters, including two real-valued angular parameters, which specify a definite polarization state on the Poincaré sphere, and a third integer parameter n specifying the beam singularity order. We show theoretically and through a numerical simulation that, while being inseparable and not allowing for the separation of polarization and orbital degrees of freedom in the general case, the Poincaré beams display remarkable properties when tightly focused. We find that at n = 2, a reverse energy flow occurs near the optical axis, which is mathematically expressed as the negative projection of the Poynting vector. We also reveal that given certain parameters of the Poincaré beams, the energy flow rotates around the optical axis due to spin–orbital conversion. We also reveal a radial optical Hall effect that occurs at the tight focus of Poincaré beams, when the on-axis components of the spin angular momentum vector have different signs on certain different-radius circles centered at the focal spot center.

Dirac Equation for Posch-Teller Potential in Radial Section Symmetry Spin Case using Asymptotic Iteration Method

This study aims to determine the value of the energy spectrum and wave function for the Posch-Teller potential in the case of radial spin symmetry. The solution to the Dirac equation using the asymptotic iteration method is done by reducing the second-order differential equation to a hypergeometric type differential equation by means of variable substitution to obtain a relativistic energy equation. The relativistic energy of the system is calculated using matlab software. This study is limited to the case of spin symmetry in the radial section.

Radial spin echo small-angle neutron scattering method: concept and performance.

A novel spin echo small-angle neutron scattering (SESANS) concept based on a rotationally symmetric magnetic field geometry is introduced. The proposed method is similar to the conventional linear SESANS technique but uses longitudinal precession fields and field gradients in a radial direction, as typically found in neutron spin echo (NSE) spectrometers. Radial SESANS could thus be implemented as an add-on to NSE setups. The neutron trajectory through the instrument is encoded with the help of radial gradients generated by radial shifters, which are coils placed in the beam area similar to Fresnel coils. The present work introduces the setup of the instrument and explores its performance and the relationship between the encoded momentum transfer and the precession angle. The results indicate that radial SESANS is only sensitive to scattering along the radial direction and thus measures the projected correlation function along this direction as a function of the spin echo length, defined similarly to linear SESANS. For an evaluation of the performance of the setup, the case of scattering from solid spheres is considered and the results calculated for the radial and linear SESANS cases are compared. Also discussed is the implementation of the radial magnetic field geometry in spin echo modulated small-angle neutron scattering.

Commensurate vortex-core switching in magnetic nanodisks at gigahertz frequencies

The development of future spintronic applications requires a thorough and fundamental understanding of the magnetisation dynamics. Of particular interest are magnetic nanodisks, in which the vortex state emerges as a stable spin configuration. Here, we focus on how the vortex core polarisation can be reversed periodically by an oscillating magnetic field, applied perpendicularly to the disk's surface. By means of micromagnetic simulations, we demonstrate the presence of several subharmonic switching modes, i.e., the commensurate ratio between the switching frequency of the core and the driving frequency. The underlying mechanism of this periodic behaviour depends on the disk thickness. For thin disks, the core switches periodically due to resonant excitation of radial spin wave modes, while it is due to the breathing mode in the case of thick disks. However, overlap of both modes impedes periodic vortex core switching. For thin disks, the threshold field amplitude required for periodic switching can be lowered to about 30~mT by increasing the disk diameter. For thick disks, in contrast, the minimal field is largely unaffected by the disk diameter, as only the energy density of a central region around the vortex core is relevant to excite the breathing mode. Our results contribute to the understanding of the switching mechanisms in magnetic nanodisks, which are of technological interest due to their potential in non-volatile memory devices.

Breaking the topological protection of target skyrmions by the excitation of spin wave modes under microwave magnetic field

Target skyrmions have been attracting intensive attention as the building block of spintronic devices. However, due to the topological protection of these magnetic textures, an extra driving force is needed to realize the transition between different magnetic textures. Herein, we achieve the transition of these magnetic textures with the breaking of topological protection by applying perpendicular microwave magnetic field, which is assisted by the excitation of breathing modes and hybridized modes (combination of breathing modes and radial spin wave modes). Another distinct resonance mode originating from the interaction of hybridized mode and breathing mode is also found, which is excited by isolated annular domain in different positions of nanodisks. Our results provide an insight for the understanding of complex dynamic behaviors in magnetic textures and the designing of spintronics devices.

Fast myocardial T1\u03c1 mapping in mice using k-space weighted image contrast and a Bloch simulation-optimized radial sampling pattern

PurposeT1ρ dispersion quantification can potentially be used as a cardiac magnetic resonance index for sensitive detection of myocardial fibrosis without the need of contrast agents. However, dispersion quantification is still a major challenge, because T1ρ mapping for different spin lock amplitudes is a very time consuming process. This study aims to develop a fast and accurate T1ρ mapping sequence, which paves the way to cardiac T1ρ dispersion quantification within the limited measurement time of an in vivo study in small animals.MethodsA radial spin lock sequence was developed using a Bloch simulation-optimized sampling pattern and a view-sharing method for image reconstruction. For validation, phantom measurements with a conventional sampling pattern and a gold standard sequence were compared to examine T1ρ quantification accuracy. The in vivo validation of T1ρ mapping was performed in N = 10 mice and in a reproduction study in a single animal, in which ten maps were acquired in direct succession. Finally, the feasibility of myocardial dispersion quantification was tested in one animal.ResultsThe Bloch simulation-based sampling shows considerably higher image quality as well as improved T1ρ quantification accuracy (+ 56%) and precision (+ 49%) compared to conventional sampling. Compared to the gold standard sequence, a mean deviation of − 0.46 ± 1.84% was observed. The in vivo measurements proved high reproducibility of myocardial T1ρ mapping. The mean T1ρ in the left ventricle was 39.5 ± 1.2 ms for different animals and the maximum deviation was 2.1% in the successive measurements. The myocardial T1ρ dispersion slope, which was measured for the first time in one animal, could be determined to be 4.76 ± 0.23 ms/kHz.ConclusionThis new and fast T1ρ quantification technique enables high-resolution myocardial T1ρ mapping and even dispersion quantification within the limited time of an in vivo study and could, therefore, be a reliable tool for improved tissue characterization.

Spin wave modes of skyrmioniums in the presence of Dzyaloshinskii-Moriya interaction

A skyrmionium or 2π skyrmion is an exotic magnetic configuration that can be stabilized in ferromagnetic nanostructures, e.g., nanodisks. Differently from the standard (or π) skyrmion, it can move without suffering deflections due to the skyrmion Hall effect (SkHE), a property that is desirable for potential applications in spintronics. In this work, using micromagnetic simulations, it is investigated the influence of the Dzyaloshinskii-Moriya interaction on the azimuthal and radial spin wave spectra of the skyrmionium. First, the ground state of the ferromagnetic disk is obtained for several values of Dzyaloshinskii-Moriya exchange constant Dint and a fixed value of perpendicular anisotropy constant Kz. The spin wave modes of the skyrmionium were obtained using in-plane and out-of-plane magnetic pulses. The results show that the values of the frequencies of the spin wave modes depend on the values of Dint. Additionally, it is shown that it is possible to create a skyrmionium using in-plane rotating magnetic fields, by tuning parameters such as the intensity of the applied perpendicular magnetic fields, and their duration.

Time‐encoded golden angle radial arterial spin labeling: Simultaneous acquisition of angiography and perfusion data

The objective of the current study was to combine a time‐encoded pseudocontinuous arterial spin labeling (te‐pCASL) scheme with a golden angle radial readout for simultaneous acquisition of angiography and perfusion images from one single dataset, both in a highly flexible single‐slice approach as well as within a multislice setting. A te‐pCASL preparation and the golden angle radial readout were both used as a temporal resolution tool to retrospectively choose the temporal window for the reconstruction of both angiography and perfusion images from a single‐slice dataset. The temporal window could be chosen retrospectively and adjusted to the hemodynamics of the volunteer on the scanner for the single‐slice dataset. Angiographic images were reconstructed at a minimum temporal resolution of 69 ms. For the perfusion phase, only the densely sampled center of k‐space was included in the reconstruction. For a multislice acquisition, the golden angle radial readout allowed reconstruction of images with different spatial resolutions to provide angiographic and perfusion information over 10 slices. The te‐pCASL preparation was used as the only source for dynamic information. The multislice acquisition shows the ability of the golden angle radial readout to display the inflow of the labeled blood into the arteries as well as the perfusion in the tissue with full brain coverage. By combining a te‐pCASL preparation with a golden angle radial readout, single‐slice high temporal resolution angiography and good quality perfusion images were reconstructed in a flexible manner from a single dataset. Optimizing the golden angle radial readout for reconstructions at multiple spatial resolutions allows for multislice acquisition.

Assessment of Repeatability, Reproducibility, and Performances of T2 Mapping-Based Radiomics Features: A Comparative Study.

Magnetic resonance imaging (MRI)-based radiomics features (RFs) quantify tumors radiological phenotypes but are sensitive to postprocessing parameters, including the intensity harmonization technique (IHT), while mappings enable objective quantitative assessment. To investigate whether T2 mapping could improve repeatability, reproducibility, and performances of radiomics compared to conventional T2-weighted imaging (T2WI). Prospective. Twenty-six healthy adults. Respiratory-trigged radial turbo spin echo (TSE) multiecho T2 mapping (prototype) and conventional TSE T2WI of the abdomen were acquired twice at 1.5 T. T2 maps were reconstructed using a two-parameter exponential fitting model. Volumes-of-interest (VOIs) were manually drawn in six tissues: liver, kidney, pancreas, muscle, bone, and spleen. After co-registration, conventional T2WIs were processed with two IHTs (standardization [std] and histogram-matching [HM]) resulting in four paired input image types: initial T2WI, T2WIstd , T2WIHM , and T2-map. VOIs were propagated to extract 45 RFs from MRI-1 and MRI-2 of each image type (LIFEx, v5.10). Influence of the input data type on RF values was evaluated with analysis of variance. RFs test-retest repeatability and reproducibility over multiple segmentations were evaluated with intra-class correlation coefficient (ICC). Correlations between k-means clusters and the six tissues depending on the RFs dataset were investigated with adjusted-Rand-index (ARI). About 41 of 45 (91.1%) RFs were significantly influenced by the input image type (P values < 0.05), which was the most influential factor on repeatability of RFs (P-value < 0.05). Repeatability ICCs from T2-map displayed intermediate values between the initial T2WI (range: 0.407-0.736) and the T2WIHM (range: 0.724-0.817). The number of RFs with interobserver and intraobserver reproducibility ICCs ≥ 0.90 was 37/45 (82.2%) for T2WIHM , 33/45 (73.3%) for T2WIstd , 31/45 (68.9%) for T2 map, and 25/45 (55.6%) for the initial T2WI. T2 map provided the best tissue discrimination (ARI=0.414 vs. 0.157 with T2WIHM ). T2 mapping provided RFs with moderate to substantial repeatability and reproducibility ICCs, along with the most preserved discriminative information. 1 TECHNICAL EFFICACY: 1.

Radial Spin Texture of the Weyl Fermions in Chiral Tellurium.

Trigonal tellurium, a small-gap semiconductor with pronounced magneto-electric and magneto-optical responses, is among the simplest realizations of a chiral crystal. We have studied by spin- and angle-resolved photoelectron spectroscopy its unconventional electronic structure and unique spin texture. We identify Kramers-Weyl, composite, and accordionlike Weyl fermions, so far only predicted by theory, and show that the spin polarization is parallel to the wave vector along the lines in k space connecting high-symmetry points. Our results clarify the symmetries that enforce such spin texture in a chiral crystal, thus bringing new insight in the formation of a spin vectorial field more complex than the previously proposed hedgehog configuration. Our findings thus pave the way to a classification scheme for these exotic spin textures and their search in chiral crystals.

Hippopede curves for modeling radial spin waves in an azimuthally graded magnonic landscape

We propose a mathematical model for describing radially propagating spin waves emitted from the core region in a magnetic patch with n vertices in a magnetic vortex state. The azimuthal anisotropic propagation of surface spin waves (SSW) into the domain, and confined spin waves (or Winter's Magnons, WM) in domain walls increases the complexity of the magnonic landscape. In order to understand the spin wave propagation in these systems, we first use an approach based on geometrical curves called 'hippopedes', however it provides no insight into the underlying physics. Analytical models rely on generalized expressions from the dispersion relation of SSW with an arbitrary angle between magnetization M and wavenumber k. The derived algebraic expression for the azimuthal dispersion is found to be equivalent to that of the 'hippopede' curves. The fitting curves from the model yield a spin wave wavelength for any given azimuthal direction, number of patch vertices and excitation frequency, showing a connection with fundamental physics of exchange dominated surface spin waves. Analytical results show good agreement with micromagnetic simulations and can be easily extrapolated to any n-corner patch geometry.

Real-time sextupole tuning for a long in-plane polarization at storage rings

A long in-plane beam polarization can be a desired feature for spin measurement experiments in storage rings. The spin precession of the particles within a beam can be controlled by means of the frozen spin method and beam bunching via RF cavities, eventually yielding a polarization lifetime of 10–100 s. Previous studies have shown that it can be further improved by sextupoles, which correct the second order effects related to the chromaticity of the beam. However, sextupoles can require readjustment after slight changes in ring parameters. This work presents a real-time sextupole tuning method that relies on a feedback algorithm. It adjusts the sextupole strength during storage, targeting a zero average radial spin component. Satisfying this condition results in a longer polarization lifetime. Simulation studies show that roughly determined feedback coefficients in this method work effectively for a wide range of ring parameters, with practical field imperfections and measurement errors taken into account. Alternatively, this technique can be used to optimize sextupole strengths in a test run without intervening the measurement.

Origin of core-to-core x-ray emission spectroscopy sensitivity to structural dynamics.

Recently, coherent structural dynamics in the excited state of an iron photosensitizer was observed through oscillations in the intensity of Kα x-ray emission spectroscopy (XES). Understanding the origin of the unexpected sensitivity of core-to-core transitions to structural dynamics is important for further development of femtosecond time-resolved XES methods and, we believe, generally necessary for interpretation of XES signals from highly non-equilibrium structures that are ubiquitous in photophysics and photochemistry. Here, we use multiconfigurational wavefunction calculations combined with atomic theory to analyze the emission process in detail. The sensitivity of core-to-core transitions to structural dynamics is due to a shift of the minimum energy metal–ligand bond distance between 1s and 2p core-hole states. A key effect is the additional contraction of the non-bonding 3s and 3p orbitals in 1s core-hole states, which decreases electron–electron repulsion and increases overlap in the metal–ligand bonds. The effect is believed to be general and especially pronounced for systems with strong bonds. The important role of 3s and 3p orbitals is consistent with the analysis of radial charge and spin densities and can be connected to the negative chemical shift observed for many transition metal complexes. The XES sensitivity to structural dynamics can be optimized by tuning the emission energy spectrometer, with oscillations up to ±4% of the maximum intensity for the current system. The theoretical predictions can be used to design experiments that separate electronic and nuclear degrees of freedom in ultrafast excited state dynamics.