Quantum Chemical Approach Research Articles

Unravelling the structure and reactivity of N,O-heterocycles: a multifaceted quantum chemical approach using a benzoxazole derivative as a case study

Unravelling the structure and reactivity of N,O-heterocycles: a multifaceted quantum chemical approach using a benzoxazole derivative as a case study

Investigation on induced smectic phases in double hydrogen bond liquid crystal complexes derived from aromatic carboxylic acids: Experimental and quantum chemical approaches

In the present study, double Hydrogen bond liquid crystal (HBLC) complexes in different mole ratio (1:1 and 1:2) have been isolated from symmetrical aromatic dicarboxylic acid of non-mesogenic compound 1,3-Phenylenediacetic acid (1,3-PDA) and mesogenic compound 4-n-dodecyloxybenzoic acid (12 OBA). Fourier transform infrared Spectroscopy (FTIR) explores the presence of functional groups in the title complexes. Formation of H-bond between 1,3-PDA and 12 OBA is experimentally confirmed by observing the FTIR peak at 3639 cm−1 (1:1 ratio). Induced mesophases and its textures along with transition temperatures are analyzed using polarizing optical microscope (POM) and differential scanning calorimetry (DSC). The layered structures (smectic phases) and their molecular mechanism has been analyzed using density functional theory (DFT). Further, the establishment of H-bond in the title complex has been investigated with the aid of optimized geomentry, molecular electrostatic potential (MEP) and reduced density gradient (RDG) analysis. The band gap energy of title complex (1:1) is calculated by UV–Vis spectrometer and the same has been justified by HOMO-LUMO studies. Maximum absorption in the UV region and moderate bandgap energy (Eg = 4.22 eV) of the title complex clearly indicates its potential application in NLO, optoelectronics and laser tuning devices. In addition to that, LC parameters and its effect on mesophase are reported using experimental and computational methods.

Enhancing perovskite solar cells performance through tailored design: pyridine-functionalized phenothiazine derivatives with modified end-capped acceptor moieties

Abstract Future energy resources are being developed using clean and renewable energies since these sources offer environmentally friendly and sustainable choices to traditional sources like fossil fuels. Among various renewable energy sources, solar energy is becoming increasingly efficient with advancements in organic photovoltaic systems. Organic semiconductor materials, which require high electron affinity and possess desirable optical and electronic properties, are crucial for these systems. Researchers are constantly trying to increase the role of photovoltaic materials in optoelectronic applications. With current energy demands, there is a shift from traditional solar cells to perovskite photovoltaic materials due to their significant contributions to renewable energy. Therefore, we have designed a new stream of donor- π -acceptor (D- π -A) type pyridine functionalized phenothiazine derivates-based donor materials, resulting in nine fabricated HTMs (PT1-PT9), by substituting the terminals with thiophene and acceptors moieties respectively to enhance the photovoltaic properties of perovskite solar cells (PSCs). All newly proposed materials were computationally examined to estimate their optoelectronics, geometrical, and photovoltaic properties using quantum chemical approach, and then compared to the reference. For organic hole-transporting materials, a heterocyclic phenothiazine core (PTZ) has been proven effective as it has feasible structure modifications, excellent electron-donating properties, and straightforward synthesis. The study of electronic parameters (density of state, frontier molecular orbitals, and electrostatic potential ESP), optical properties (light harvesting efficiency, absorption maxima, dipole moment, and first excitation energies) and charge transfer characteristics (electron–hole overlap, transition density matrix) of designed materials revealed that there is an increase in absorption range under the influence of terminal acceptor groups, with lowering the bandgap values compared to the reference. A density of state (DOS) graph and HOMO–LUMO schema are evidence of the electron-withdrawing effect of acceptor moieties. Transition density matrix (TDM) analysis proves reliable charger transfer in designed molecules. Reorganization energy values for designed molecules are lower than the reference making charge transfer carriers more efficient. Additionally, solvation-free energy values (−17.28 to −33.19 Kcalmol−1) and higher dipole moments suggest better surface-wetting and solubility properties. In general, the fabricated materials have exceptional charge mobilities with higher absorption and reduced band gap values that make them suitable and stable candidates for photovoltaic devices.

Accurate Geometries of Large Molecules at DFT Cost by Semiexperimental and Coupled Cluster Templating Fragments.

Accurate geometries of small semirigid molecules in the gas phase are available thanks to high-resolution spectroscopy and accurate quantum chemical approaches. These results can be employed for validating cheaper low-level quantum chemical models or correcting the corresponding structures of large molecules. On these grounds, in this work, a large panel of semiexperimental equilibrium structures already available in the literature is used to confirm the average error (1 mÅ for bond lengths and 2 mrad for valence angles) of a version of the Pisa composite schemes (PCS2), which is applicable to molecules containing up to about 20 atoms. Then, the geometries of 30 additional medium-sized systems were optimized at the PCS2 level to cover a more balanced chemical space containing moieties poorly represented in SE compilations. The final database is available on a public domain Web site (https://www.skies-village.it/databases/) and can be employed for correcting structures of larger molecules obtained by hybrid or double-hybrid density functionals in the framework of the templating molecule approach. Several examples show that corrections based on the structures of building blocks taken from this database reduce the error of the B3LYP geometrical parameters of large molecules by nearly an order of magnitude without increasing the computational cost. Furthermore, the results of different density functional theory (DFT) or wave function (e.g., MP2) models can be improved in the same way by simply computing both the whole molecule and suitable building blocks at the chosen level. Then, whenever reference structures of some building blocks containing up to about 20 atoms are not available, they can be purposely optimized at the PCS2 level by employing reasonable computer resources. Therefore, a new DFT-cost tool is now available for the accurate characterization of large molecules by experiment-oriented scientists.

Electronic structure, global reactivity descriptors and nonlinear optical properties of glycine interacted with ZnO, MgO and CaO for bacterial detection

Modern laboratory medicine relies on analytical instruments for bacterial detection, focusing on biosensors and optical sensors for early disease diagnosis and treatment. Thus, Density Functional Theory (DFT) was utilized to study the reactivity of glycine interacted with metal oxides (ZnO, MgO, and CaO) for bacterial detection. Total dipole moment (TDM), frontier molecular orbitals (FMOs), FTIR spectroscopic data, electronic transition states, chemical reactivity descriptors, nonlinear optical (NLO) characteristics, and molecular electrostatic potential (MESP) were all investigated at the B3LYP/6–31G(d, p) level using DFT and Time-Dependent DFT (TD-DFT). The Coulomb-attenuating approach (CAM-B3LYP) was utilized to obtain theoretical electronic absorption spectra with the 6-31G(d, p) basis set to be more accurate than alternative quantum chemical calculation approaches, showing good agreement with the experimental data. The TDM and FMO investigation showed that glycine/CaO model has the highest TDM (10.129Debye) and lowest band gap (1.643 eV). The DFT computed IR and the experimental FTIR are consistent. The calculated UV-vis spectra showed a red shift with an increase in polarity following an increase in the absorption wavelength due to the interaction with ZnO, MgO, and CaO. Among the five solvents of water, methanol, ethanol, DMSO and acetone, the water and DMSO enhances the UV-Vis absorption. Glycine/CaO model showed high linear polarizability (14.629 × 10−24esu) and first hyperpolarizability (23.117 × 10−30esu), indicating its potential for nonlinear optical applications. The results showed that all model molecules, particularly glycine/CaO, contribute significantly to the development of materials with potential NLO features for sensor and optoelectronic applications. Additionally, MESP confirmed the increased electronegativity of the studied structures. Additionally, glycine/ZnO nanocomposite was synthesized and characterized using IR and UV-visible spectroscopy to determine their structural and spectroscopic features. It was discovered that there was good agreement between the DFT computed findings and the related experimental data. The antibacterial activity of glycine/ZnO nanocomposites against Staphylococcus aureus (S. aureus) and Pseudomonas aeruginosa were studied in terms of concentration and time. The results showed that increasing the concentration of glycine/ZnO nanocomposite significantly enhanced its antibacterial efficacy by lowering optical density. Notably, Pseudomonas aeruginosa exhibited lower susceptibility to the nanocomposite compared to S. aureus, requiring higher concentrations for effective bactericidal action. In summary, this study contributes novel insights into the dual functionality of glycine-metal oxide complexes, with significant implications as optical biosensor for microbial detection.

Quantum Chemical Approaches for Manipulation and Evaluation of Intracage Microelectric Field Strength of Molecular Containers in Y@C64 and Y@C64X4 (X = Cl, F, and H, Y = NH4Cl, H3O-Cl, and 2H2O).

The effect of an oriented external electric field (EEF) on materials has led to the ongoing development, which stimulates us to consider whether intracage microelectric fields (IMEFs) can be used to substitute for the EEF. Focusing on the manipulation and evaluation of the IMEF of asymmetric molecular containers, the host-guest compounds of interesting pineapple-shaped Y@C64X4 (X = vacant, Cl, F, and H; Y = NH4Cl, H3O-Cl, and 2H2O) are theoretically constructed and the strength of the IMEF was evaluated by the intrapotential energy surface analysis by using the point charge (q = +1) scanning method. Interestingly, the left and right halves of each cage are like two IMEFs connected in reverse series. Both the addition of four X atoms and the orientation of the guest can sensitively influence the IMEF's strengths and directions of both half cages and further determine the entire cage's IMEF. Subsequently, the IMEF can sensitively change the binding characteristics and properties of the guest species. Therefore, the manipulation and evaluation of the IMEF can be achievable. This work may provide support for an asymmetric molecular container with an IMEF to manipulate the novel structural and chemical bond characteristics of the guest species.

Optoelectronic Properties of Triply Twisted Möbius Carbon Nanobelt and the Design of Its Isomeric Nanomaterials

The triply twisted Möbius carbon nanobelt (TMCNB) possesses an extremely distinctive geometric and electronic structure and therefore is anticipated to demonstrate outstanding optical properties. In this paper, through integrating quantum chemical calculations and wave function analysis approaches, in-depth studies are conducted on the one-photon absorption (OPA) and two-photon absorption (TPA) characteristics, aromaticity, and circular dichroism of the TMCNB. Inspired by this structure, we further deform it to construct a novel structure, MCNB2, and verify the stability of this structure, thereby confirming its rationality. Since variations in structure will result in dissimilar optical properties, we also undertake theoretical analyses on the absorption properties and circular dichroism of MCNB2. The outcomes of this study offer a significant theoretical foundation for the design and construction of chiral optoelectronic materials.

Optimizing cold-flow properties and oxidation stability of B40 biodiesel blend with turpentine oil and ethanol: Experimental and quantum chemical approach

This study investigates the effectiveness of turpentine oil and ethanol as cold-flow improvers (CFIs), synergizing as antioxidants for ternary B40 biodiesel blend. Utilizing the response surface methodology (RSM), the effects of these CFIs on the ternary blend, including cloud point (CP), cold filter plugging point (CFPP), filter blocking tendency (FBT), precipitation, and oxidation stability, were comprehensively evaluated. The analysis of variance (ANOVA) presented that a linear model best describes the impact of CFIs on CP, whereas quadratic models more accurately represent CFPP, FBT, and oxidation stability. The results also demonstrate that 2FI was identified as the most suitable model for describing precipitation responses. The optimal concentrations of turpentine oil and ethanol were determined to be 10 % v/v and 0.5 % v/v, respectively, resulting in predicted values for CP, CFPP, FBT, precipitation, and oxidation stability of 10.4 °C, 9.0 °C, 1.31, 9.09 mg/100 mL, and 225 minutes, respectively. Theoretical insights from density functional theory (DFT) calculations confirmed that the primary interaction controlling wax formation in biodiesel blends is the strong hydrogen bonding between monostearin and pinene, a major component of turpentine oil, which effectively disrupts wax crystallization. This study presents a novel approach to enhancing B40 biodiesel cold-flow properties and maintaining its oxidation stability by utilizing the synergistic effects of turpentine oil and ethanol to optimize B40 biodiesel formulation.

Effect of Electron-Donating Substituents and an Electric Field on the ΔEST of Selected Imidazopyridine Derivatives: A DFT Study.

A series of thermally activated delayed fluorescent (TADF) molecules having an imidazopyridine acceptor, a benzene linker, and a 9,9-dimethyl-9,10-dihydroacridine donor are designed and examined using a quantum chemical approach. The above framework spatially separates the highest occupied molecular orbital (HOMO) and lowest unoccupied molecular orbital (LUMO), minimizing their overlap, ultimately resulting in a reduced energy gap between the excited singlet and triplet states (ΔEST). The impact of electron-donating substituents (-Me, -Et, -t-Bu, -OMe, and -NMe2) on the donor moiety of the parent molecule 2-(4-(9,9-dimethylacridin-10(9H)-yl)phenyl)imidazo[1,2-a]pyridine-3,6-dicarbonitrile (Ac-CNImPy) is investigated. The calculated results revealed that for a given substituent, the para-substituted derivatives exhibit relatively less ΔEST, compared to that of the respective ortho- and meta derivatives. The value of ΔEST decreased with an increase in the electron-donating capacity of the substituent. Additionally, the ΔEST of the disubstituted derivatives is found to be less than that for the monosubstituted derivatives. The charge transport studies revealed that molecules with strong electron-donating substituents act as electron transporters. The effect of an external electric field (EEF) on ΔEST of the parent molecule Ac-CNIMPY and its derivative is also examined and revealed that the ΔEST can be further reduced by applying an electric field of appropriate strength in a direction perpendicular to the dipole moment of the molecule and in the plane of the acceptor moiety.

Assessing realistic binding energies of some essential interstellar radicals with amorphous solid water. A fully quantum chemical approach

Assessing realistic binding energies of some essential interstellar radicals with amorphous solid water. A fully quantum chemical approach

Theoretical Insight of Excited States at Large Scale Organic/Organic Interface for Designing Novel Organic Electronic Devices

Revealing electronically excited states across organic/organic interfaces is important to speculate the charge photo-generation mechanisms in organic devices. As organic solar cells are large and unorganized systems so it is very tough to access it using conventional quantum chemical approaches. To unearth the charge separation mechanism a massive scale of excited states should be considered. For this purpose in this study, we have applied recently developed fragment molecular orbital (FMO) method that can effectively consider large-scale molecular aggregates. In our model, we have treated for different configurations of pentacene/C60 bilayer hetero-junction structures. Here, we have also discussed the charge delocalization effect, structural deformations. The measured energy dynamics low-lying interfacial CT states are in well match with experimental reports. J. of Sci. and Tech. Res. 5(1): 169-178, 2023

Ab initio study of the interaction between the charged system (FH+) and the He atom

We investigated the molecular structure and spectroscopic properties of the charged system (FH+) in interaction with a helium atom using an ab initio quantum chemistry approach in Jacobi coordinates. Our study focused on the ground state X2Π of (FH+) with various theoretical methods including UCCSD, UCCSD(T) and UCCSD(T)-F12, alongside basis sets like aug-cc-pVnZ (n = T, Q, 5, and 6) and cc-pVQZ-F12. We evaluated how these methods and basis sets affect the minimum energies We assessed the impact of the methods, basis sets, and extrapolation approaches on the minimum energies. Potential energy surfaces (PES) were generated using the correlated UCCSD(T)-F12 method with cc-pVQZ-F12 for hydrogen and fluorine, and cc-pVQZ-F12/optri for helium. These surfaces, considering spin-orbit coupling, are degenerate for linear geometries (θ=0° and θ=180°) of the (FH+)-He complex and correlate with the doubly degenerate X2Π state of (FH+). Our results reveal a strong anisotropic character at short and intermediate distances and a quasi-isotropic character upon dissociation into FH+ and He. We compared the spectroscopic parameters of the (FH+)-He complex with existing theoretical data, finding that the linear arrangement exhibits the highest stability, consistent with previous results for similar complexes. This conclusion is supported by the Milliken atomic charge distribution and a three-dimensional map of the Molecular Electrostatic Potential. Additionally, we used the LEVEL program, to calculate the bound rovibronic levels of the (FH+)-He complex for angular momentum values Ω=1/2 and Ω=3/2. Utilizing our ab initio results and a general interpolation approach based on the Reproducing Kernel Hilbert Space method, we generated contour maps illustrating the analytical potential for the (FH+)-He system. These findings will be employed to study the stabilities, geometries, energetics, and structures of the FH+ charged system within helium clusters.

Nanostructured Molecular-Network Arsenoselenides from the Border of a Glass-Forming Region: A Disproportionality Analysis Using Complementary Characterization Probes.

Binary AsxSe100-x alloys from the border of a glass-forming region (65 < x < 70) subjected to nanomilling in dry and dry-wet modes are characterized by the XRPD, micro-Raman scattering (micro-RS) and revised positron annihilation lifetime (PAL) methods complemented by a disproportionality analysis using the quantum-chemical cluster modeling approach. These alloys are examined with respect to tetra-arsenic biselenide As4Se2 stoichiometry, realized in glassy g-As65Se35, glassy-crystalline g/c-As67Se33 and glassy-crystalline g/c-As70Se30. From the XRPD results, the number of rhombohedral As and cubic arsenolite As2O3 phases in As-Se alloys increases after nanomilling, especially in the wet mode realized in a PVP water solution. Nanomilling-driven amorphization and reamorphization transformations in these alloys are identified by an analysis of diffuse peak halos in their XRPD patterning, showing the interplay between the levels of a medium-range structure (disruption of the intermediate-range ordering at the cost of an extended-range one). From the micro-RS spectroscopy results, these alloys are stabilized by molecular thioarsenides As4Sen (n = 3, 4), regardless of their phase composition, remnants of thioarsenide molecules destructed under nanomilling being reincorporated into a glass network undergoing a polyamorphic transition. From the PAL spectroscopy results, volumetric changes in the wet-milled alloys with respect to the dry-milled ones are identified as resulting from a direct conversion of the bound positron-electron (Ps, positronium) states in the positron traps. Ps-hosting holes in the PVP medium appear instead of positron traps, with ~0.36-0.38 ns lifetimes ascribed to multivacancies in the As-Se matrix. The superposition of PAL spectrum peaks and tails for pelletized PVP, unmilled, dry-milled, and dry-wet-milled As-Se samples shows a spectacular smoothly decaying trend. The microstructure scenarios of the spontaneous (under quenching) and activated (under nanomilling) decomposition of principal network clusters in As4Se2-bearing arsenoselenides are recognized. Over-constrained As6·(2/3) ring-like network clusters acting as pre-cursors of the rhombohedral As phase are the main products of this decomposition. Two spontaneous processes for creating thioarsenides with crystalline counterparts explain the location of the glass-forming border in an As-Se system near the As4Se2 composition, while an activated decomposition process for creating layered As2Se3 structures is responsible for the nanomilling-driven molecular-to-network transition.

Graphene/MWCNT/copper-nanoparticle fabricated printed electrode for diclofenac detection in milk and drinking water: Electrochemical and in-silico analysis

This study investigates the electrochemical sensing of Diclofenac sodium. A single carbon printed electrode was modified with the combination of graphene (GRP), multi-walled carbon nanotube (MWCNT), and copper-nanoparticle (CuNP) blended with oleic acid (OA) (i.e. CuNP@OA) as working electrode material of the three-electrode system (i.e. GRP-MWCNT-CuNP@OA). Here, copper nanoparticles, being responsible for catalysis, are embedded on the matrix comprising of GRP and MWCNT which serves as the conductive matrix material for electrode. The OA acts as a stabilising agent for the active CuNPs. The chemical sensitivity feature (in terms of binding interaction) of the GRP-MWCNT-CuNP@OA composite model interacting with the Diclofenac has been examined by implementing quantum chemical calculation approaches like molecular modelling, semi-empirical, QTAIM, and NCI-plot based tools. Some useful and important properties have also been examined using electronic parameters such as HOMO, LUMO, HOMO-LUMO gap, charge transfer (CT), QTAIM-based topological parameters, etc. which could indeed be helpful for the experimentalists in understanding the structural, stability/energetics, and electronic features of the probed composite models at nano-level. Further, the characterization of the composite was carried out through some sophisticated characterization techniques like scanning electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX), and powder XRD. Cyclic voltammetry (CV) is used for studying stability of the composite and chemical kinetics of the oxidation of Diclofenac sodium. Differential pulse voltammetry (DPV) was used to evaluate the sensing performance of the above-mentioned material by determining the lower range detection limit of Diclofenac (57.7 nM) and linear range (17.41 μM – 206.45 μM) of the electrochemical sensor. Further to validate the results obtained, real sample analysis was performed using the developed electrode in drinking water and milk spiked with Diclofenac.

Theoretical Analysis of Superior Photodegradation of Methylene Blue by Cerium Oxide/Reduced Graphene Oxide vs. Graphene.

Density functional theory and a semi-empirical quantum chemical approach were used to evaluate the photocatalytic efficiency of ceria (CeO2) combined with reduced graphene oxide (rGO) and graphene (GP) for degrading methylene blue (MB). Two main aspects were examined: the adsorption ability of rGO and GP for MB, and the separation of photogenerated electrons and holes in CeO2/rGO and CeO2/GP. Our results, based on calculations of the adsorption energy, population analysis, bond strength index, and reduced density gradient, show favorable energetics for MB adsorption on both rGO and GP surfaces. The process is driven by weak, non-covalent interactions, with rGO showing better MB adsorption. A detailed analysis involving parameters like fractional occupation density, the centroid distance between molecular orbitals, and the Lewis acid index of the catalysts highlights the effective charge separation in CeO2/rGO compared to CeO2/GP. These findings are crucial for understanding photocatalytic degradation mechanisms of organic dyes and developing efficient photocatalysts.

Exploration of sensing behavior B3O3 quantum dot toward methyl halides; a quantum chemical approach

In this study, B3O3 quantum dot has been used for sensing of various methyl halides for the first time. The suitable cavity of B3O3 makes it more suitable for the sensing of variety of analytes. The three, very simple and most important methyl halides (CH3F, CH3Cl and CH3Br) are selected to adsorb on B3O3 surface. Density functional theory (DFT) method with appropriate basis set was implemented. Among the considered complexes, methyl bromide complex CH3Br@B3O3) showed higher interaction energy of −16.90 kcal mol−1. The noncovalent interaction (NCI) analysis identified the existence of van der Waals interactions among all analytes and adsorbent. The density of state (DOS) and natural bond orbital (NBO) charges analyses identified the charge transfer and conductive properties of B3O3 nanosheet after interaction with alkyl halides. Frontier molecular orbital study revealed the electronic attributes of considered complexes. It is revealed that B3O3 quantum dot can be a very good choice for sensing of methyl halides and could be helpful for monitoring and reducing the environmental pollution.

Metrological aspects of a gas-phase DFT/B3LYP quantum-chemical approach to prioritize radical scavenging activity among a group of olive oil phenols

Metrological aspects of a gas-phase DFT/B3LYP quantum-chemical approach to prioritize radical scavenging activity among a group of olive oil phenols

Pentaphosphorylation via the Anhydride of Dihydrogen Pentametaphosphate: Access to Nucleoside Hexa- and Heptaphosphates and Study of Their Interaction with RibonucleaseA.

Pentametaphosphate is the little studied cyclic pentamer of the metaphosphate ion, [PO3]5 5-. We show that the doubly protonated form of this pentamer can be selectively dehydrated to provide the anhydride [P5O14]3- (1). This trianion is the well-defined condensed phosphate component of a novel reagent for attachment of a pentaphosphate chain to biomolecules all in one go. Here, we demonstrate by extending adenosine monophosphate (AMP) and uridine monophosphate (UMP) to their corresponding nucleoside hexaphosphates, while adenosine diphosphate (ADP) and uridine diphosphate (UDP) are phosphate chain-extended to the corresponding nucleoside heptaphosphates. Such constructs are of interest for their potential biological function with respect to RNA-processing enzymes. Thus, we go on to investigate in detail the interaction of the polyanionic constructs with ribonuclease A, a model protein containing a polycationic active site and for which X-ray crystal structures are relatively straightforward to obtain. This work presents a combined experimental and quantum chemical approach to understanding the interactions of RNase A with the new nucleoside hexa- and heptaphosphate constructs.

Using Adiabatic Energy Splitting To Compute Dexter Energy Transfer Couplings.

Dexter energy transfer and transport (DET) are of broad interest in energy science, and DET rates depend on electronic couplings between donor and acceptor species. DET couplings are challenging to compute since they originate from both one- and two-particle interactions, and the strength of this interaction drops approximately exponentially with donor-acceptor distances. Using adiabatic energy splitting to compute DET couplings has advantages because adiabatic states can be calculated directly using conventional quantum chemical methods. We describe a minimum energy splitting method to compute the DET coupling by altering molecular geometries to drive the systems into a T1/T2 energy quasi-degenerate-activated DA complex. We explore the accuracy of various quantum chemical approaches to calculate the Dexter couplings.

Quantum chemical modeling of alkane 2D monolayer formation on graphene

The paper presents a quantum chemical approach for assessment of the thermodynamic parameters of association for alkanes CnH2n+2 (n = 6–14) and polyaromatic hydrocarbons (PAH) of the coronene series as model structures of the graphene surface within the framework of semiempirical methods. The enthalpy, entropy and Gibbs energy of formation and binding for alkanes with PAH were calculated using the PM3 and PM6-DH2 methods. It is shown that an adequate description of the interactions in the regarded complexes requires the use of PM6-DH2 method, since it contains corrections for dispersion interactions and hydrogen bonds. The parallel orientation of the alkane molecule relative to the coronene plane is proved to be more energetically preferable than perpendicular one, which is consistent with experimental data.Intermolecular C–H/π interactions are revealed to be crucial in the 2D film formation of alkanes on graphene/graphite. While interactions between alkane molecules make a destabilizing contribution due to the implementation of energetically unfavorable types of intermolecular CH/HC interactions. This stipulates a threshold chain length of alkanes capable of film formation on the graphene/graphite surface at standard temperature: 14 and 19 carbon atoms for parallel and perpendicular oriented alkanes, respectively. The obtained threshold values of the alkane chain length, as well as the geometric parameters of their orientation in 2D monolayers on the graphene/graphite surface are consistent with available experimental data.