Power Of Quantitative Trait Loci Detection Research Articles

Multi-parental fungal mapping population study to detect genomic regions associated with Pyrenophora teres f. teres virulence

In recent years multi-parental mapping populations (MPPs) have been widely adopted in many crops to detect quantitative trait loci (QTLs) as this method can compensate for the limitations of QTL analyses using bi-parental mapping populations. Here we report the first multi-parental nested association mapping (MP-NAM) population study used to detect genomic regions associated with host-pathogenic interactions. MP-NAM QTL analyses were conducted on 399 Pyrenophora teres f. teres individuals using biallelic, cross-specific and parental QTL effect models. A bi-parental QTL mapping study was also conducted to compare the power of QTL detection between bi-parental and MP-NAM populations. Using MP-NAM with 399 individuals detected a maximum of eight QTLs with a single QTL effect model whilst only a maximum of five QTLs were detected with an individual bi-parental mapping population of 100 individuals. When reducing the number of isolates in the MP-NAM to 200 individuals the number of QTLs detected remained the same for the MP-NAM population. This study confirms that MPPs such as MP-NAM populations can be successfully used in detecting QTLs in haploid fungal pathogens and that the power of QTL detection with MPPs is greater than with bi-parental mapping populations.

Combined QTL mapping on bi-parental immortalized heterozygous populations to detect the genetic architecture on heterosis.

From bi-parental pure-inbred lines (PIL), immortalized backcross (i.e., IB1 and IB2, representing the two directions of backcrossing) and F2 (i.e., IF2) populations can be developed. These populations are suitable for genetic studies on heterosis, due to the present of both homozygous and heterozygous genotypes, and in the meantime allow repeated phenotyping trials across multiple locations and years. In this study, we developed a combined approach of quantitative trait locus (QTL) mapping, when some or all of the four immortalized populations (i.e., PIL, IB1, IB2, and IF2) are available. To estimate the additive and dominant effects simultaneously and accurately, suitable transformations are made on phenotypic values from different populations. When IB1 and IB2 are present, summation and subtraction are used. When IF2 and PIL are available, mid-parental values and mid-parental heterosis are used. One-dimensional genomic scanning is performed to detect the additive and dominant QTLs, based on the algorithm of inclusive composite interval mapping (ICIM). The proposed approach was applied to one IF2 population together with PIL in maize, and identified ten QTLs on ear length, showing varied degrees of dominance. Simulation studies indicated the proposed approach is similar to or better than individual population mapping by QTL detection power, false discovery rate (FDR), and estimated QTL position and effects.

Optimization of BSA-seq experiment for QTL mapping.

Deep sequencing-based bulked segregant analysis (BSA-seq) has become a popular approach for quantitative trait loci (QTL) mapping in recent years. Effective statistical methods for BSA-seq have been developed, but how to design a suitable experiment for BSA-seq remains unclear. In this paper, we show in theory how the major experimental factors (including population size, pool proportion, pool balance, and generation) and the intrinsic factors of a QTL (including heritability and degree of dominance) affect the power of QTL detection and the precision of QTL mapping in BSA-seq. Increasing population size can improve the power and precision, depending on the QTL heritability. The best proportion of each pool in the population is around 0.25. So, 0.25 is generally applicable in BSA-seq. Small pool proportion can greatly reduce the power and precision. Imbalance of pool pair in size also causes decrease of the power and precision. Additive effect is more important than dominance effect for QTL mapping. Increasing the generation of filial population produced by selfing can significantly increase the power and precision, especially from F2 to F3. These findings enable researchers to optimize the experimental design for BSA-seq. A web-based program named BSA-seq Design Tool is available at http://124.71.74.135/BSA-seqDesignTool/ and https://github.com/huanglikun/BSA-seqDesignTool.

QTL mapping in outbred tetraploid (and diploid) diallel populations.

Over the last decade, multiparental populations have become a mainstay of genetics research in diploid species. Our goal was to extend this paradigm to autotetraploids by developing software for quantitative trait locus (QTL) mapping in connected F1 populations derived from a set of shared parents. For QTL discovery, phenotypes are regressed on the dosage of parental haplotypes to estimate additive effects. Statistical properties of the model were explored by simulating half-diallel diploid and tetraploid populations with different population sizes and numbers of parents. Across scenarios, the number of progeny per parental haplotype (pph) largely determined the statistical power for QTL detection and accuracy of the estimated haplotype effects. Multiallelic QTL with heritability 0.2 were detected with 90% probability at 25 pph and genome-wide significance level 0.05, and the additive haplotype effects were estimated with over 90% accuracy. Following QTL discovery, the software enables a comparison of models with multiple QTL and nonadditive effects. To illustrate, we analyzed potato tuber shape in a half-diallel population with three tetraploid parents. A well-known QTL on chromosome 10 was detected, for which the inclusion of digenic dominance lowered the Deviance Information Criterion (DIC) by 17 points compared to the additive model. The final model also contained a minor QTL on chromosome 1, but higher-order dominance and epistatic effects were excluded based on the DIC. In terms of practical impacts, the software is already being used to select offspring based on the effect and dosage of particular haplotypes in breeding programs.

Haplotype reconstruction in connected tetraploid F1 populations.

In diploid species, many multiparental populations have been developed to increase genetic diversity and quantitative trait loci (QTL) mapping resolution. In these populations, haplotype reconstruction has been used as a standard practice to increase the power of QTL detection in comparison with the marker-based association analysis. However, such software tools for polyploid species are few and limited to a single biparental F1 population. In this study, a statistical framework for haplotype reconstruction has been developed and implemented in the software PolyOrigin for connected tetraploid F1 populations with shared parents, regardless of the number of parents or mating design. Given a genetic or physical map of markers, PolyOrigin first phases parental genotypes, then refines the input marker map, and finally reconstructs offspring haplotypes. PolyOrigin can utilize single nucleotide polymorphism (SNP) data coming from arrays or from sequence-based genotyping; in the latter case, bi-allelic read counts can be used (and are preferred) as input data to minimize the influence of genotype calling errors at low depth. With extensive simulation we show that PolyOrigin is robust to the errors in the input genotypic data and marker map. It works well for various population designs with ≥30 offspring per parent and for sequences with read depth as low as 10x. PolyOrigin was further evaluated using an autotetraploid potato dataset with a 3 × 3 half-diallel mating design. In conclusion, PolyOrigin opens up exciting new possibilities for haplotype analysis in tetraploid breeding populations.

Optimizing sampling design and sequencing strategy for the genomic analysis of quantitative traits in natural populations.

Mapping the genes underlying ecologically relevant traits in natural populations is fundamental to develop a molecular understanding of species adaptation. Current sequencing technologies enable the characterization of a species' genetic diversity across the landscape or even over its whole range. The relevant capture of the genetic diversity across the landscape is critical for a successful genetic mapping of traits and there are no clear guidelines on how to achieve an optimal sampling and which sequencing strategy to implement. Here we determine, through simulation, the sampling scheme that maximizes the power to map the genetic basis of a complex trait in an outbreeding species across an idealized landscape and draw genomic predictions for the trait, comparing individual and pool sequencing strategies. Our results show that quantitative trait locus detection power and prediction accuracy are higher when more populations over the landscape are sampled and this is more cost-effectively done with pool sequencing than with individual sequencing. Additionally, we recommend sampling populations from areas of high genetic diversity. As progress in sequencing enables the integration of trait-based functional ecology into landscape genomics studies, these findings will guide study designs allowing direct measures of genetic effects in natural populations across the environment.

The influence of QTL allelic diversity on QTL detection in multi-parent populations: a simulation study in sugar beet

BackgroundMulti-parent populations (MPPs) are important resources for studying plant genetic architecture and detecting quantitative trait loci (QTLs). In MPPs, the QTL effects can show various levels of allelic diversity, which can be an important factor influencing the detection of QTLs. In MPPs, the allelic effects can be more or less specific. They can depend on an ancestor, a parent or the combination of parents in a cross. In this paper, we evaluated the effect of QTL allelic diversity on the QTL detection power in MPPs.ResultsWe simulated: a) cross-specific QTLs; b) parental and ancestral QTLs; and c) bi-allelic QTLs. Inspired by a real application in sugar beet, we tested different MPP designs (diallel, chessboard, factorial, and NAM) derived from five or nine parents to explore the ability to sample genetic diversity and detect QTLs. Using a fixed total population size, the QTL detection power was larger in MPPs with fewer but larger crosses derived from a reduced number of parents. The use of a larger set of parents was useful to detect rare alleles with a large phenotypic effect. The benefit of using a larger set of parents was however conditioned on an increase of the total population size. We also determined empirical confidence intervals for QTL location to compare the resolution of different designs. For QTLs representing 6% of the phenotypic variation, using 1600 F2 offspring individuals, we found average 95% confidence intervals over different designs of 49 and 25 cM for cross-specific and bi-allelic QTLs, respectively.ConclusionsMPPs derived from less parents with few but large crosses generally increased the QTL detection power. Using a larger set of parents to cover a wider genetic diversity can be useful to detect QTLs with a reduced minor allele frequency when the QTL effect is large and when the total population size is increased.

Ghost QTL and hotspots in experimental crosses: novel approach for modeling polygenic effects.

Ghost quantitative trait loci (QTL) are the false discoveries in QTL mapping, that arise due to the "accumulation" of the polygenic effects, uniformly distributed over the genome. The locations on the chromosome that are strongly correlated with the total of the polygenic effects depend on a specific sample correlation structure determined by the genotypes at all loci. The problem is particularly severe when the same genotypes are used to study multiple QTL, e.g. using recombinant inbred lines or studying the expression QTL. In this case, the ghost QTL phenomenon can lead to false hotspots, where multiple QTL show apparent linkage to the same locus. We illustrate the problem using the classic backcross design and suggest that it can be solved by the application of the extended mixed effect model, where the random effects are allowed to have a nonzero mean. We provide formulas for estimating the thresholds for the corresponding t-test statistics and use them in the stepwise selection strategy, which allows for a simultaneous detection of several QTL. Extensive simulation studies illustrate that our approach eliminates ghost QTL/false hotspots, while preserving a high power of true QTL detection.

Harnessing High-throughput Phenotyping and Genotyping for Enhanced Drought Tolerance in Crop Plants

Development of drought-tolerant cultivars is one of the challenging tasks for the plant breeders due to its complex inheritance and polygenic regulation. Evaluating genetic material for drought tolerance is a complex process due to its spatiotemporal interactions with environmental factors. The conventional breeding approaches are costly, lengthy, and inefficient to achieve the expected gain in drought tolerance. In this regard, genomics-assisted breeding (GAB) offers promise to develop cultivars with improved drought tolerance in a more efficient, quicker, and cost-effective manner. The success of GAB depends upon the precision in marker-trait association and estimation of genomic estimated breeding values (GEBVs), which mostly depends on coverage and precision of genotyping and phenotyping. A wide gap between the discovery and practical use of quantitative trait loci (QTL) for crop improvement has been observed for many important agronomical traits. Such a limitation could be due to the low accuracy in QTL detection, mainly resulting from low marker density and manually collected phenotypes of complex agronomic traits. Increasing marker density using the high-throughput genotyping (HTG), and accurate and precise phenotyping using high-throughput digital phenotyping (HTP) platforms can improve the precision and power of QTL detection. Therefore, both HTG and HTP can enhance the practical utility of GAB along with a faster characterization of germplasm and breeding material. In the present review, we discussed how the recent innovations in HTG and HTP would assist in the breeding of improved drought-tolerant varieties. We have also discussed strategies, tools, and analytical advances made on the HTG and HTP along with their pros and cons.

The Effects of Quantitative Trait Architecture on Detection Power in Short-Term Artificial Selection Experiments.

Evolve and resequence (E&R) experiments, in which artificial selection is imposed on organisms in a controlled environment, are becoming an increasingly accessible tool for studying the genetic basis of adaptation. Previous work has assessed how different experimental design parameters affect the power to detect the quantitative trait loci (QTL) that underlie adaptive responses in such experiments, but so far there has been little exploration of how this power varies with the genetic architecture of the evolving traits. In this study, we use forward simulation to build a more realistic model of an E&R experiment in which a quantitative polygenic trait experiences a short, but strong, episode of truncation selection. We study the expected power for QTL detection in such an experiment and how this power is influenced by different aspects of trait architecture, including the number of QTL affecting the trait, their starting frequencies, effect sizes, clustering along a chromosome, dominance, and epistasis patterns. We show that all of these parameters can affect allele frequency dynamics at the QTL and linked loci in complex and often unintuitive ways, and thus influence our power to detect them. One consequence of this is that existing detection methods based on models of independent selective sweeps at individual QTL often have lower detection power than a simple measurement of allele frequency differences before and after selection. Our findings highlight the importance of taking trait architecture into account when designing and interpreting studies of molecular adaptation with temporal data. We provide a customizable modeling framework that will enable researchers to easily simulate E&R experiments with different trait architectures and parameters tuned to their specific study system, allowing for assessment of expected detection power and optimization of experimental design.

Genetic architecture of agronomic and quality traits in a nested association mapping population of spring wheat.

Germplasm collections are rich sources of genetic variation to improve crops for many valuable traits. Nested association mapping (NAM) populations can overcome the limitations of genome-wide association studies (GWAS) in germplasm collections by reducing the effect of population structure. We exploited the genetic diversity of the USDA-ARS wheat (Triticum aestivum L.) core collection by developing the Spring Wheat Multiparent Introgression Population (SWMIP). To develop this population, twenty-five core parents were crossed and backcrossed to the Minnesota spring wheat cultivar RB07. The NAM population and 26 founder parents were genotyped using genotyping-by-sequencing and phenotyped for heading date, height, test weight, and grain protein content. After quality control, 20,312 markers with physical map positions were generated for 2,038 recombinant inbred lines (RILs). The number of RILs in each family varied between 58 and 96. Three GWAS models were utilized for quantitative trait loci (QTL) detection and accounted for known family stratification, genetic kinship, and both covariates. GWAS was performed on the whole population and also by bootstrap sampling of an equal number of RILs from each family. Greater power of QTL detection was achieved by treating families equally through bootstrapping. In total 16, 15, 12, and 13 marker-trait associations (MTAs) were identified for heading date, height, test weight, and grain protein content, respectively. Some of these MTAs were coincident with major genes known to control the traits, but others were novel and contributed by the wheat core parents. The SWMIP will be a valuable source of genetic variation for spring wheat breeding.

A tetrasomic inheritance model and likelihood-based method for mapping quantitative trait loci in autotetraploid species.

Summary Dissecting the genetic architecture of quantitative traits in autotetraploid species is a methodologically challenging task, but a pivotally important goal for breeding globally important food crops, including potato and blueberry, and ornamental species such as rose. Mapping quantitative trait loci (QTLs) is now a routine practice in diploid species but is far less advanced in autotetraploids, largely due to a lack of analytical methods that account for the complexities of tetrasomic inheritance.We present a novel likelihood‐based method for QTL mapping in outbred segregating populations of autotetraploid species. The method accounts properly for sophisticated features of gene segregation and recombination in an autotetraploid meiosis. It may model and analyse molecular marker data with or without allele dosage information, such as that from microarray or sequencing experiments.The method developed outperforms existing bivalent‐based methods, which may fail to model and analyse the full spectrum of experimental data, in the statistical power of QTL detection, and accuracy of QTL location, as demonstrated by an intensive simulation study and analysis of data sets collected from a segregating population of potato (Solanum tuberosum).The study enables QTL mapping analysis to be conducted in autotetraploid species under a rigorous tetrasomic inheritance model.

Comparative study of population genomic approaches for mapping colony-level traits.

Social insect colonies exhibit colony-level phenotypes such as social immunity and task coordination, which are produced by the individual phenotypes. Mapping the genetic basis of such phenotypes requires associating the colony-level phenotype with the genotypes in the colony. In this paper, we examine alternative approaches to DNA extraction, library construction, and sequencing for genome wide association studies (GWAS) of colony-level traits using a population sample of Cataglyphis niger ants. We evaluate the accuracy of allele frequency estimation from sequencing a pool of individuals (pool-seq) from each colony using either whole-genome sequencing or reduced representation genomic sequencing. Based on empirical measurement of the experimental noise in sequenced DNA pools, we show that reduced representation pool-seq is drastically less accurate than whole-genome pool-seq. Surprisingly, normalized pooling of samples did not result in greater accuracy than un-normalized pooling. Subsequently, we evaluate the power of the alternative approaches for detecting quantitative trait loci (QTL) of colony-level traits by using simulations that account for an environmental effect on the phenotype. Our results can inform experimental designs and enable optimizing the power of GWAS depending on budget, availability of samples and research goals. We conclude that for a given budget, sequencing un-normalized pools of individuals from each colony provides optimal QTL detection power.

Functional QTL mapping and genomic prediction of canopy height in wheat measured using a robotic field phenotyping platform.

Genetic studies increasingly rely on high-throughput phenotyping, but the resulting longitudinal data pose analytical challenges. We used canopy height data from an automated field phenotyping platform to compare several approaches to scanning for quantitative trait loci (QTLs) and performing genomic prediction in a wheat recombinant inbred line mapping population based on up to 26 sampled time points (TPs). We detected four persistent QTLs (i.e. expressed for most of the growing season), with both empirical and simulation analyses demonstrating superior statistical power of detecting such QTLs through functional mapping approaches compared with conventional individual TP analyses. In contrast, even very simple individual TP approaches (e.g. interval mapping) had superior detection power for transient QTLs (i.e. expressed during very short periods). Using spline-smoothed phenotypic data resulted in improved genomic predictive abilities (5-8% higher than individual TP prediction), while the effect of including significant QTLs in prediction models was relatively minor (<1-4% improvement). Finally, although QTL detection power and predictive ability generally increased with the number of TPs analysed, gains beyond five or 10 TPs chosen based on phenological information had little practical significance. These results will inform the development of an integrated, semi-automated analytical pipeline, which will be more broadly applicable to similar data sets in wheat and other crops.

Effect of genotyped bulls with different numbers of phenotyped progenies on quantitative trait loci detection and genomic evaluation in a simulated cattle population.

The objective of this study was to assess the effect of genotyped bulls with different numbers of phenotyped progenies on quantitative trait loci (QTL) detection and genomic evaluation using a simulated cattle population. Twelve generations (G1–G12) were simulated from the base generation (G0). The recent population had different effective population sizes, heritability, and number of QTL. G0–G4 were used for pedigree information. A total of 300 genotyped bulls from G5–G10 were randomly selected. Their progenies were generated in G6–G11 with different numbers of progeny per bull. Scenarios were considered according to the number of progenies and whether the genotypes were possessed by the bulls or the progenies. A genome‐wide association study and genomic evaluation were performed with a single‐step genomic best linear unbiased prediction method to calculate the power of QTL detection and the genomic estimated breeding value (GEBV). We found that genotyped bulls could be available for QTL detection depending on conditions. Additionally, using a reference population, including genotyped bulls, which had more progeny phenotypes, enabled a more accurate prediction of GEBV. However, it is desirable to have more than 4,500 individuals consisting of both genotypes and phenotypes for practical genomic evaluation.

Variation in phosphorus and sulfur content shapes the genetic architecture and phenotypic associations within the wheat grain ionome.

Dissection of the genetic basis of wheat ionome is crucial for understanding the physiological and biochemical processes underlying mineral accumulation in seeds, as well as for efficient crop breeding. Most of the elements essential for plants are metals stored in seeds as chelate complexes with phytic acid or sulfur-containing compounds. We assume that the involvement of phosphorus and sulfur in metal chelation is the reason for strong phenotypic correlations within ionome. Adjustment of element concentrations for the effect of variation in phosphorus and sulfur seed content resulted in drastic change of phenotypic correlations between the elements. The genetic architecture of wheat grain ionome was characterized by quantitative trait loci (QTL) analysis using a cross between durum and wild emmer wheat. QTL analysis of the adjusted traits and two-trait analysis of the initial traits paired with either P or S considerably improved QTL detection power and accuracy, resulting in the identification of 105 QTLs and 617 QTL effects for 11 elements. Candidate gene search revealed some potential functional associations between QTLs and corresponding genes within their intervals. Thus, we have shown that accounting for variation in P and S is crucial for understanding of the physiological and genetic regulation of mineral composition of wheat grain ionome and can be implemented for other plants.

Development of a Multiparent Population for Genetic Mapping and Allele Discovery in Six-Row Barley.

Germplasm collections hold valuable allelic diversity for crop improvement and genetic mapping of complex traits. To gain access to the genetic diversity within the USDA National Small Grain Collection (NSGC), we developed the Barley Recombinant Inbred Diverse Germplasm Population (BRIDG6), a six-row spring barley multiparent population (MPP) with 88 cultivated accessions crossed to a common parent (Rasmusson). The parents were randomly selected from a core subset of the NSGC that represents the genetic diversity of landrace and breeding accessions. In total, we generated 6160 F5 recombinant inbred lines (RILs), with an average of 69 and a range of 37-168 RILs per family, that were genotyped with 7773 SNPs, with an average of 3889 SNPs segregating per family. We detected 23 quantitative trait loci (QTL) associated with flowering time with five QTL found coincident with previously described flowering time genes. A major QTL was detected near the flowering time gene, HvPpd-H1 which affects photoperiod. Haplotype-based analysis of HvPpd-H1 identified private alleles to families of Asian origin conferring both positive and negative effects, providing the first observation of flowering time-related alleles private to Asian accessions. We evaluated several subsampling strategies to determine the effect of sample size on the power of QTL detection, and found that, for flowering time in barley, a sample size >50 families or 3000 individuals results in the highest power for QTL detection. This MPP will be useful for uncovering large and small effect QTL for traits of interest, and identifying and utilizing valuable alleles from the NSGC for barley improvement.

Quantifying the Power and Precision of QTL Analysis in Autopolyploids Under Bivalent and Multivalent Genetic Models.

New genotyping technologies, offering the possibility of high genetic resolution at low cost, have helped fuel a surge in interest in the genetic analysis of polyploid species. Nevertheless, autopolyploid species present extra challenges not encountered in diploids and allopolyploids, such as polysomic inheritance or double reduction. Here we investigate the power and precision of quantitative trait locus (QTL) analysis in outcrossing autopolyploids, comparing the results of a model that assumes random bivalent chromosomal pairing during meiosis to one that also allows for multivalents and double reduction. Through a series of simulation studies we found that marginal gains in QTL detection power are achieved using the double reduction model when multivalent pairing occurs. However, when exploring the effect of variable genotypic information across parental homologs, we found that both QTL detection power and precision require high and uniform genotypic information contents. This effect far outweighed considerations regarding bivalent or multivalent pairing (and double reduction) during meiosis. We propose that autopolyploid QTL studies be accompanied by both marker coverage information and per-homolog genotypic information coefficients (GIC). Application of these methods to an autotetraploid potato (Solanum tuberosum L.) mapping population confirmed our ability to locate and dissect QTL in highly heterozygous outcrossing autotetraploid populations.

Four Parent Maize (FPM) Population: Effects of Mating Designs on Linkage Disequilibrium and Mapping Quantitative Traits.

Multiparent advanced generation inter-cross (MAGIC) populations can provide improved genetic mapping resolution by increasing allelic diversity and effective recombination. The Four Parent Maize (FPM; L.) population implemented five different mating designs used in MAGIC and bi-parental populations to compare empirical effects on genetic resolution and power of quantitative trait locus (QTL) detection; the combined population here comprised of 1149 individuals with 118,509 genetic markers. Measurements were recorded for plant height (PH), ear height (EH), days to anthesis (DTA) and silking (DTS) in seven environments, spanning three years. Linkage disequilibrium (LD) analysis of subpopulations indicated MAGIC population designs should incorporate generations of intermating to overcome initial LD increase caused by population admixture in a non-intermated four parent population (4way0sib). A 3- to 4-fold increase in genetic resolution (<0.8) and a 2.5-fold decrease in the extent of LD decay (<0.2) compared to the biparental populations was found for the four parent cross at the third generation of intermating (4way3sib). Power of QTL detection was affected to a greater extent by sample size rather than by mating designs. The FPM power simulations indicated that MAGIC populations have the ability to meet or exceed the mapping power of nested association panels with fewer individuals and diversity inputs. Using association mapping software we identified 2, 5, 7, and 6 QTL for PH, EH, DTA, and DTS, respectively. The FPM population is a valuable resource for quantifying empirical improvements of parent number, intermating, and the number of progeny for QTL linkage mapping.

Relevance of genetic relationship in GWAS and genomic prediction.

The objective of this study was to analyze the relevance of relationship information on the identification of low heritability quantitative trait loci (QTLs) from a genome-wide association study (GWAS) and on the genomic prediction of complex traits in human, animal and cross-pollinating populations. The simulation-based data sets included 50 samples of 1000 individuals of seven populations derived from a common population with linkage disequilibrium. The populations had non-inbred and inbred progeny structure (50 to 200) with varying number of members (5 to 20). The individuals were genotyped for 10,000 single nucleotide polymorphisms (SNPs) and phenotyped for a quantitative trait controlled by 10 QTLs and 90 minor genes showing dominance. The SNP density was 0.1cM and the narrow sense heritability was 25%. The QTL heritabilities ranged from 1.1 to 2.9%. We applied mixed model approaches for both GWAS and genomic prediction using pedigree-based and genomic relationship matrices. For GWAS, the observed false discovery rate was kept below the significance level of 5%, the power of detection for the low heritability QTLs ranged from 14 to 50%, and the average bias between significant SNPs and a QTL ranged from less than 0.01 to 0.23cM. The QTL detection power was consistently higher using genomic relationship matrix. Regardless of population and training set size, genomic prediction provided higher prediction accuracy of complex trait when compared to pedigree-based prediction. The accuracy of genomic prediction when there is relatedness between individuals in the training set and the reference population is much higher than the value for unrelated individuals.