Quantitative Trait Loci Genes Research Articles

A module involving HIGH LEAF TEMPERATURE1 controls instantaneous water use efficiency.

Drought stress inhibits plant growth and agricultural production. Improving plant instantaneous water use efficiency (iWUE), which is strictly regulated by stomata, is an effective way to cope with drought stress. However, the mechanisms of iWUE regulation are poorly understood. Through genetic screening for suppressors of mpk12-4, an Arabidopsis (Arabidopsis thaliana) mutant with a major iWUE quantitative trait locus gene MITOGEN-ACTIVATED PROTEIN KINASE12 deleted, we identified HIGH LEAF TEMPERATURE1 (HT1). Genetic interaction and physiological analyses showed that MPK12 controls iWUE through multiple modules in a high CO2-induced stomatal closing pathway that regulate SLOW ANION CHANNEL-ASSOCIATED1 (SLAC1) activity. HT1 acts downstream of MPK12, whereas OPEN STOMATA1 (OST1) and GUARD CELL HYDROGEN PEROXIDE-RESISTANT1 (GHR1) function downstream of HT1 by activating SLAC1 in iWUE. Photosynthetic-CO2 response curves and biomass analyses under different water-supply conditions showed that HT1 dysfunction improved iWUE and also increased plant growth capacity, and products of HT1 putative orthologs from Brassica (Brassica napus) and rice (Oryza sativa) exhibited functions similar to that of Arabidopsis HT1 in iWUE and the CO2-signaling pathway. Our study revealed the mechanism of MPK12-mediated iWUE regulation in Arabidopsis and provided insight into the internal relationship between iWUE and CO2 signaling in guard cells and a potential target for improving crop iWUE and drought tolerance.

Genetic dissection of Brassica napus seed vigor after aging.

Stable and novel QTLs that affect seed vigor under different storage durations were discovered, and BnaOLE4, located in the interval of cqSW-C2-3, increased seed vigor after aging. Seed vigor is an important trait in crop breeding; however, the underlying molecular regulatory mechanisms governing this trait in rapeseed remain largely unknown. In the present study, vigor-related traits were analyzed in seeds from a doubled haploid (DH) rapeseed (Brassica napus) population grown in 2 different environments using seeds stored for 7, 5, and 3years under natural storage conditions. A total of 229 quantitative trait loci (QTLs) were identified and were found to explain 3.78%-17.22% of the phenotypic variance for seed vigor-related traits after aging. We further demonstrated that seed vigor-related traits were positively correlated with oil content (OC) but negatively correlated with unsaturated fatty acids (FAs). Some pleiotropic QTLs that collectively regulate OC, FAs, and seed vigor, such as uq.A8, uq.A3-2, uq.A9-2, and uq.C3-1, were identified. The transcriptomic results from extreme pools of DH lines with distinct seed vigor phenotypes during accelerated aging revealed that various biological pathways and metabolic processes (such as glutathione metabolism and reactive oxygen species) were involved in seed vigor. Through integration of QTL analysis and RNA-Seq, a regulatory network for the control of seed vigor was constructed. Importantly, a candidate (BnaOLE4) from cqSW-C2-3 was selected for functional analysis, and transgenic lines overexpressing BnaOLE4 showed increased seed vigor after artificial aging. Collectively, these results provide novel information on QTL and potential candidate genes for molecular breeding for improved seed storability.

Integrating Genome-Wide Association Study, Transcriptome and Metabolome Reveal Novel QTL and Candidate Genes That Control Protein Content in Soybean.

Protein content (PC) is crucial to the nutritional quality of soybean [Glycine max (L.) Merrill]. In this study, a total of 266 accessions were used to perform a genome-wide association study (GWAS) in three tested environments. A total of 23,131 high-quality SNP markers (MAF ≥ 0.02, missing data ≤ 10%) were identified. A total of 40 association signals were significantly associated with PC. Among them, five novel quantitative trait nucleotides (QTNs) were discovered, and another 32 QTNs were found to be overlapping with the genomic regions of known quantitative trait loci (QTL) related to soybean PC. Combined with GWAS, metabolome and transcriptome sequencing, 59 differentially expressed genes (DEGs) that might control the change in protein content were identified. Meantime, four commonly upregulated differentially abundant metabolites (DAMs) and 29 commonly downregulated DAMs were found. Remarkably, the soybean gene Glyma.08G136900, which is homologous with Arabidopsis hydroxyproline-rich glycoproteins (HRGPs), may play an important role in improving the PC. Additionally, Glyma.08G136900 was divided into two main haplotype in the tested accessions. The PC of haplotype 1 was significantly lower than that of haplotype 2. The results of this study provided insights into the genetic mechanisms regulating protein content in soybean.

Genome-Wide Association Study of Early Vigour-Related Traits for a Rice (Oryza sativa L.) japonica Diversity Set Grown in Aerobic Conditions.

Aerobic rice production is a relatively new system in which rice is direct-seeded and grown in non-flooded but well-watered conditions to improve water productivity. Early vigour-related traits are likely to be important in aerobic conditions. This study aimed to identify quantitative trait loci (QTL) and candidate genes associated with early vigour-related traits in aerobic conditions using a japonica rice diversity set. Field experiments and glasshouse experiments conducted under aerobic conditions revealed significant genotypic variation in early vigour-related traits. Genome-wide association analysis identified 32 QTL associated with early vigour-related traits. Notably, two QTL, qAEV1.5 and qAEV8, associated with both early vigour score and mesocotyl length, explained up to 22.1% of the phenotypic variance. In total, 23 candidate genes related to plant growth development and abiotic stress response were identified in the two regions. This study provides novel insights into the genetic basis of early vigour under aerobic conditions. Validation of identified QTL and candidate genes in different genetic backgrounds is crucial for future studies. Moreover, testing the effect of QTL on yield under different environments would be valuable. After validation, these QTL and genes can be considered for developing markers in marker-assisted selection for aerobic rice production.

Pangenome-Wide Association Study and Transcriptome Analysis Reveal a Novel QTL and Candidate Genes Controlling both Panicle and Leaf Blast Resistance in Rice

Cultivating rice varieties with robust blast resistance is the most effective and economical way to manage the rice blast disease. However, rice blast disease comprises leaf and panicle blast, which are different in terms of resistance mechanisms. While many blast resistant rice cultivars were bred using genes conferring resistance to only leaf or panicle blast, mining durable and effective quantitative trait loci (QTLs) for both panicle and leaf blast resistance is of paramount importance. In this study, we conducted a pangenome-wide association study (panGWAS) on 9 blast resistance related phenotypes using 414 international diverse rice accessions from an international rice panel. This approach led to the identification of 74 QTLs associated with rice blast resistance. One notable locus, qPBR1, validated in a F4:5 population and fine-mapped in a Heterogeneous Inbred Family (HIF), exhibited broad-spectrum, major and durable blast resistance throughout the growth period. Furthermore, we performed transcriptomic analysis of 3 resistant and 3 sensitive accessions at different time points after infection, revealing 3,311 differentially expressed genes (DEGs) potentially involved in blast resistance. Integration of the above results identified 6 candidate genes within the qPBR1 locus, with no significant negative effect on yield. The results of this study provide valuable germplasm resources, QTLs, blast response genes and candidate functional genes for developing rice varieties with enduring and broad-spectrum blast resistance. The qPBR1, in particular, holds significant potential for breeding new rice varieties with comprehensive and durable resistance throughout their growth period.

A Summary of Two Decades of QTL and Candidate Genes That Control Seed Tocopherol Contents in Maize (Zea mays L.).

Tocopherols are secondary metabolites synthesized through the shikimate biosynthetic pathway in the plastids of most plants. It is well known that α-Tocopherol (vitamin E) has many health benefits for humans and animals; therefore, it is highly used in human and animal diets. Tocopherols vary considerably in most crop (and plant) species and within cultivars of the same species depending on environmental and growth conditions; tocopherol content is a polygenic, complex traits, and its inheritance is poorly understood. The objective of this review paper was to summarize all identified quantitative trait loci (QTL) that control seed tocopherols and related contents identified in maize (Zea mays) during the past two decades (2002-2022). Candidate genes identified within these QTL regions are also discussed. The QTL described here, and candidate genes identified within these genomic regions could be used in breeding programs to develop maize cultivars with high, beneficial levels of seed tocopherol contents.

Identification of a major QTL and candidate genes analysis for branch angle in rapeseed (Brassica napus L.) using QTL-seq and RNA-seq.

Branching angle is an essential trait in determining the planting density of rapeseed (Brassica napus L.) and hence the yield per unit area. However, the mechanism of branching angle formation in rapeseed is not well understood. In this study, two rapeseed germplasm with extreme branching angles were used to construct an F2 segregating population; then bulked segregant analysis sequencing (BSA-seq) and quantitative trait loci (QTL) mapping were utilized to localize branching anglerelated loci and combined with transcriptome sequencing (RNA-seq) and quantitative real-time PCR (qPCR) for candidate gene mining. A branching angle-associated quantitative trait loci (QTL) was mapped on chromosome C3 (C3: 1.54-2.65 Mb) by combining BSA-seq as well as traditional QTL mapping. A total of 54 genes had SNP/Indel variants within the QTL interval were identified. Further, RNA-seq of the two parents revealed that 12 of the 54 genes were differentially expressed between the two parents. Finally, we further validated the differentially expressed genes using qPCR and found that six of them presented consistent differential expression in all small branching angle samples and large branching angles, and thus were considered as candidate genes related to branching angles in rapeseed. Our results introduce new candidate genes for the regulation of branching angle formation in rapeseed, and provide an important reference for the subsequent exploration of its formation mechanism.

The QTL and Candidate Genes Regulating the Early Tillering Vigor Traits of Late-Season Rice in Double-Cropping Systems.

Rice effective panicle is a major trait for grain yield and is affected by both the genetic tiller numbers and the early tillering vigor (ETV) traits to survive environmental adversities. The mechanism behind tiller bud formation has been well described, while the genes and the molecular mechanism underlying rice-regulating ETV traits are unclear. In this study, the candidate genes in regulating ETV traits have been sought by quantitative trait locus (QTL) mapping and bulk-segregation analysis by resequencing method (BSA-seq) conjoint analysis using rice backcross inbred line (BIL) populations, which were cultivated as late-season rice of double-cropping rice systems. By QTL mapping, seven QTLs were detected on chromosomes 1, 3, 4, and 9, with the logarithm of the odds (LOD) values ranging from 3.52 to 7.57 and explained 3.23% to 12.98% of the observed phenotypic variance. By BSA-seq analysis, seven QTLs on chromosomes 1, 2, 4, 5, 7, and 9 were identified using single-nucleotide polymorphism (SNP) and insertions/deletions (InDel) index algorithm and Euclidean distance (ED) algorithm. The overlapping QTL resulting from QTL mapping and BSA-seq analysis was shown in a 1.39 Mb interval on chromosome 4. In the overlap interval, six genes, including the functional unknown genes Os04g0455650, Os04g0470901, Os04g0500600, and ethylene-insensitive 3 (Os04g0456900), sialyltransferase family domain containing protein (Os04g0506800), and ATOZI1 (Os04g0497300), showed the differential expression between ETV rice lines and late tillering vigor (LTV) rice lines and have a missense base mutation in the genomic DNA sequences of the parents. We speculate that the six genes are the candidate genes regulating the ETV trait in rice, which provides a research basis for revealing the molecular mechanism behind the ETV traits in rice.

COG3 confers the chilling tolerance to mediate OsFtsH2-D1 module in rice.

The chilling stress induced by the global climate change harms rice production, especially at seedling and booting stage, which feed half the population of the world. Although there are key quantitative trait locus genes identified in the individual stage, few genes have been reported and functioned at both stages. Utilizing chromosome segment substitution lines (CSSLs) and a combination of map-based cloning and phenotypes of the mutants and overexpression lines, we identified the major gene Chilling-tolerance in Geng/japonica rice 3 (COG3) of q chilling-tolerance at the booting and seedling stage 11 (qCTBS11) conferred chilling tolerance at both seedling and booting stages. COG3 was significantly upregulated in Nipponbare under chilling treatment compared with its expression in 93-11. The loss-of-function mutants cog3 showed a reduced chilling tolerance. On the contrary, overexpression enhanced chilling tolerance. Genome evolution and genetic analysis suggested that COG3 may have undergone strong selection in temperate japonica during domestication. COG3, a putative calmodulin-binding protein, physically interacted with OsFtsH2 at chloroplast. In cog3-1, OsFtsH2-mediated D1 degradation was impaired under chilling treatment compared with wild-type. Our results suggest that COG3 is necessary for maintaining OsFtsH2 protease activity to regulate chilling tolerance at the booting and seedling stage.

Longitudinal genome-wide association study reveals early QTL that predict biomass accumulation under cold stress in sorghum.

Sorghum bicolor is a promising cellulosic feedstock crop for bioenergy due to its high biomass yields. However, early growth phases of sorghum are sensitive to cold stress, limiting its planting in temperate environments. Cold adaptability is crucial for cultivating bioenergy and grain sorghum at higher latitudes and elevations, or for extending the growing season. Identifying genes and alleles that enhance biomass accumulation under early cold stress can lead to improved sorghum varieties through breeding or genetic engineering. We conducted image-based phenotyping on 369 accessions from the sorghum Bioenergy Association Panel (BAP) in a controlled environment with early cold treatment. The BAP includes diverse accessions with dense genotyping and varied racial, geographical, and phenotypic backgrounds. Daily, non-destructive imaging allowed temporal analysis of growth-related traits and water use efficiency (WUE). A genome-wide association study (GWAS) was performed to identify genomic intervals and genes associated with cold stress response. The GWAS identified transient quantitative trait loci (QTL) strongly associated with growth-related traits, enabling an exploration of the genetic basis of cold stress response at different developmental stages. This analysis of daily growth traits, rather than endpoint traits, revealed early transient QTL predictive of final phenotypes. The study identified both known and novel candidate genes associated with growth-related traits and temporal responses to cold stress. The identified QTL and candidate genes contribute to understanding the genetic mechanisms underlying sorghum's response to cold stress. These findings can inform breeding and genetic engineering strategies to develop sorghum varieties with improved biomass yields and resilience to cold, facilitating earlier planting, extended growing seasons, and cultivation at higher latitudes and elevations.

Descriptive Statistics and Genome-Wide Copy Number Analysis of Milk Production Traits of Jiangsu Chinese Holstein Cows.

Milk production traits are the most important quantitative economic traits in dairy cow production; improving the yield and quality of milk is an important way to ensure the production efficiency of the dairy industry. This study carried out a series of in-depth statistical genetics studies and molecular analyses on the Chinese Holstein cows in the Jiangsu Province, such as descriptive statistics and copy number variation analysis. A genetic correlation, phenotypic correlation, and descriptive statistical analysis of five milk production traits (milk yield, milk fat percentage, milk fat yield, milk protein percentage, and milk protein yield) of the dairy cows were analyzed using the SPSS and DMU software. Through quality control, 4173 cows and their genomes were used for genomic study. Then, SNPs were detected using DNA chips, and a copy number variation (CNV) analysis was carried out to locate the quantitative trait loci (QTL) of the milk production traits by Perl program software Penn CNV and hidden Markov model (HMM). The phenotypic means of the milk yield, milk fat percentage, milk fat mass, milk protein percentage, and milk protein mass at the first trimester were lower than those at the other trimesters by 8.821%, 1.031%, 0.930%, 0.003%, and 0.826%, respectively. The five milk production traits showed a significant phenotypic positive correlation (p < 0.01) and a high genetic positive correlation among the three parities. Based on the GGPBovine 100 K SNP data, QTL-detecting research on the fist-parity milk performance of dairy cows was carried out via the CNV. We identified 1731 CNVs and 236 CNVRs in the 29 autosomes of 984 Holstein dairy cows, and 19 CNVRs were significantly associated with the milk production traits (p < 0.05). These CNVRs were analyzed via a bioinformatics analysis; a total of 13 gene ontology (GO) terms and 20 Kyoto Encyclopedia of Genes and Genomes (KEGG) pathways were significantly enriched (p < 0.05), and these terms and pathways are mainly related to lipid metabolism, amino acid metabolism, and cellular catabolic processes. This study provided a theoretical basis for the molecular-marker-assisted selection of dairy cows by developing descriptive statistics on the milk production traits of dairy cows and by locating the QTL and functional genes that affect the milk production traits of first-born dairy cows. The results describe the basic status of the milk production traits of the Chinese Holstein cows in Jiangsu and locate the QTL and functional genes that affect the milk production traits of the first-born cows, providing a theoretical basis for the molecular-marker-assisted selection of dairy cows.

Identification of major QTLs for seed size by combining QTL-mapping and RNAseq in an electron beam induced mutant of groundnut (Arachis hypogaea L.)

Combining QTL-mapping using SNP markers generated with genotyping by sequencing and RNA-seq identified a major QTL and candidate genes for enhanced seed size and leaf size in groundnut, respectively. Towards this, we conducted quantitative trait locus (QTL) analysis for hundred kernel weight in F2 mapping population derived from electron beam induced large seed mutant, TG 89 and normal seed genotype, ICGV 15007. A major QTL for seed size was identified in Arahy.05 chromosome between flanking markers AhMITE470 and SNP05_103140987. This QTL interval harboured a groundnut ortholog of TIFY gene. Of the 29 TIFY family genes in groundnut, the gene arahy.5M7JWE is the identified within the QTL interval on chromosome A05 and was down regulated in the mutant, indicating its putative role for large seed phenotype in the mutant.

Association of DGAT1 with goat milk and meat production traits

Genetic factors can influence the composition of milk fat and its genetic variation. The purpose of our work was to familiarize and study the structure, role, and influence of the DGAT1 (or diacylglycerol-O-acyltransferase 1) gene on goat milk production, its structure, and relationship with milk fat for further research in improving the goat selection system. The selection of goats, aimed at increasing the frequency of alleles with a positive effect on this trait, was initiated by geneticists. In general, identifying and evaluating genetic markers for milk performance traits are the initial and crucial steps for establishing a marker-assisted selection system (MAS). Thus, increasing productivity through genetic selection is a common goal for many animal breeding programs worldwide. The amount of milk, milk fat, and proteins are essential features of dairy farming. In cheese production, milk fatty acids perform a crucial technical function, as they are the main building blocks of milk fat, giving the cheese its unique taste and textural properties. Milk fatty acids are necessary for producing many dairy products, while intramuscular fat is associated with meat quality. Triacylglycerols (TAG) are the main components of intramuscular fat and milk fat. Therefore, understanding polymorphisms and genes related to fat synthesis is essential for animal husbandry. The identification of quantitative trait loci (QTL) and genes associated with milk production traits has been supported by various studies over the past decade. It was established that QTL genes on chromosomes 14, 15, and 9 are related to the properties of milk and meat production in goats. The presence of the diacylglycerol-O-acyltransferase 1 (DGAT1) gene in goat chromosomes 14, 15, and 9 has been reported. Having a key role in fat metabolism and TAG synthesis, DGAT1 genes have attracted considerable attention, especially in animal milk production. Several polymorphisms have been documented in DGAT1 in different animal species, including many cattle and small cattle, for their association with milk production traits. The critical role of the DGAT1 gene in milk fat metabolism makes it an exciting candidate for genetic variation in milk characteristics in dairy goats.

Maize and heat stress: Physiological, genetic, and molecular insights.

Global mean temperature is increasing at a rapid pace due to the rapid emission of greenhouse gases majorly from anthropogenic practices and predicted to rise up to 1.5°C above the pre-industrial level by the year 2050. The warming climate is affecting global crop production by altering biochemical, physiological, and metabolic processes resulting in poor growth, development, and reduced yield. Maize is susceptible to heat stress, particularly at the reproductive and early grain filling stages. Interestingly, heat stress impact on crops is closely regulated by associated environmental covariables such as humidity, vapor pressure deficit, soil moisture content, and solar radiation. Therefore, heat stress tolerance is considered as a complex trait, which requires multiple levels of regulations in plants. Exploring genetic diversity from landraces and wild accessions of maize is a promising approach to identify novel donors, traits, quantitative trait loci (QTLs), and genes, which can be introgressed into the elite cultivars. Indeed, genome wide association studies (GWAS) for mining of potential QTL(s) and dominant gene(s) is a major route of crop improvement. Conversely, mutation breeding is being utilized for generating variation in existing populations with narrow genetic background. Besides breeding approaches, augmented production of heat shock factors (HSFs) and heat shock proteins (HSPs) have been reported in transgenic maize to provide heat stress tolerance. Recent advancements in molecular techniques including clustered regularly interspaced short palindromic repeats (CRISPR) would expedite the process for developing thermotolerant maize genotypes.

Mapping of major QTL and candidate gene analysis for hull colour in foxtail millet (Setaria italica (L.) P. Beauv.)

BackgroundHull colour is an important morphological marker for selection in seed production of foxtail millet. However, the molecular mechanisms underlying hull colour variation remain unknown.ResultsAn F7 recombinant inbred line (RIL) population containing 215 lines derived from Hongjiugu × Yugu18 was used to analyze inheritance and detect the quantitative trait loci (QTL) for four hull colour traits using major gene plus polygene mixed inheritance analysis and composite interval mapping (CIM) in four environments. Genetic analysis revealed that the hull colour L* value (HCL*) was controlled by two major genes plus additive polygenes, the hull colour a* value (HCa*) was controlled by three major genes, the hull colour b* value (HCb*) was controlled by two major genes plus polygenes, and the hull colour C* value (HCC*) was controlled by four major genes. A high-density genetic linkage map covering 1227.383 cM of the foxtail millet genome, with an average interval of 0.879 cM between adjacent bin markers, was constructed using 1420 bin markers. Based on the genetic linkage map and the phenotypic data, a total of 39 QTL were detected for these four hull colour traits across four environments, each explaining 1.50%–49.20% of the phenotypic variation. Of these, six environmentally stable major QTL were co-localized to regions on chromosomes 1 and 9, playing a major role in hull colour. There were 556 annotated genes within the two QTL regions. Based on the functions of homologous genes in Arabidopsis and the Kyoto Encyclopedia of Genes and Genomes (KEGG) and Gene Ontology (GO) gene annotations, five genes were predicted as candidate genes for further studies.ConclusionsThis is the first study to use an inheritance model and QTL mapping to determine the genetic mechanisms of hull colour trait in foxtail millet. We identified six major environmentally stable QTL and predicted five potential candidate genes to be associated with hull colour. These results advance the current understanding of the genetic mechanisms underlying hull colour traits in foxtail millet and provide additional resources for application in genomics-assisted breeding and potential isolation and functional characterization of the candidate genes.

Genetic dissection of 26 meat cut, meat quality and carcass traits in four pig populations

BackgroundCurrently, meat cut traits are integrated in pig breeding objectives to gain extra profit. However, little is known about the heritability of meat cut proportions (MCP) and their correlations with other traits. The aims of this study were to assess the heritability and genetic correlation of MCP with carcass and meat quality traits using single nucleotide polymorphism chips and conduct a genome-wide association study (GWAS) to identify candidate genes for MCP.ResultsSeventeen MCP, 12 carcass, and seven meat quality traits were measured in 2012 pigs from four populations (Landrace; Yorkshire; Landrace and Yorkshire hybrid pigs; Duroc, and Landrace and Yorkshire hybrid pigs). Estimates of the heritability for MCP ranged from 0.10 to 0.55, with most estimates being moderate to high and highly consistent across populations. In the combined population, the heritability estimates for the proportions of scapula bone, loin, back fat, leg bones, and boneless picnic shoulder were 0.44 ± 0.04, 0.36 ± 0.04, 0.44 ± 0.04, 0.38 ± 0.04, and 0.39 ± 0.04, respectively. Proportion of middle cuts was genetically significantly positively correlated with intramuscular fat content and backfat depth. Proportion of ribs was genetically positively correlated with carcass oblique length and straight length (0.35 ± 0.08 to 0.45 ± 0.07) and negatively correlated with backfat depth (− 0.26 ± 0.10 to − 0.45 ± 0.10). However, weak or nonsignificant genetic correlations were observed between most MCP, indicating their independence. Twenty-eight quantitative trait loci (QTL) for MCP were detected by GWAS, and 24 new candidate genes related to MCP were identified, which are involved with growth, height, and skeletal development. Most importantly, we found that the development of the bones in different parts of the body may be regulated by different genes, among which HMGA1 may be the strongest candidate gene affecting forelimb bone development. Moreover, as previously shown, VRTN is a causal gene affecting vertebra number, and BMP2 may be the strongest candidate gene affecting hindlimb bone development.ConclusionsOur results indicate that breeding programs for MCP have the potential to enhance carcass composition by increasing the proportion of expensive cuts and decreasing the proportion of inexpensive cuts. Since MCP are post-slaughter traits, the QTL and candidate genes related to these traits can be used for marker-assisted and genomic selection.

Towards Genetic Dissection of Skeletal Class III Malocclusion: A Review of Genetic Variations Underlying the Phenotype in Humans and Future Directions.

Skeletal abnormalities and malocclusions have varied features that impact populations globally, impairing aesthetics and lowering life quality. The prevalence of the Skeletal Class III disease is the lowest among all angle malocclusions, with varied prevalence across nations. Environmental, genetic, and societal factors play a role in its numerous etiologies. In this study, we conducted a thorough search across the published data relating to quantitative trait loci (QTL) and the genes associated with Class III progression in humans, discussed these findings and their limitations, and proposed future directions and strategies for studying this phenotype. An inclusive search of published papers in the PubMed and Google Scholar search engines using the following terms: 1. Human skeletal Class III; 2. Genetics of Human skeletal Class III; 3. QTL mapping and gene associated with human skeletal Class III; 4. enriched skeletal Class-III-malocclusion-associated pathways. Our search has found 53 genes linked with skeletal Class III malocclusion reported in humans, genes associated with epigenetics and phenomena, and the top 20 enriched pathways associated with skeletal Class III malocclusion. The human investigations yielded some contentious conclusions. We conducted a genome-wide association study (GWAS), an epigenetics-wide association study (EWAS), RNA-seq analysis, integrating GWAS and expression quantitative trait loci (eQTL), micro- and small-RNA, and long non-coding RNA analysis in tissues connected to skeletal Class III malocclusion phenotype in tissues connected with the skeletal phenotype. Finally, we invite regional, national, and international orthodontists and surgeons to join this effort by contributing human samples with skeletal Class III malocclusion following the accepted Helsinki ethical protocol to challenge these phenomena jointly.

Multi-Year QTL Mapping and RNA-seq Reveal Candidate Genes for Early Floret-Opening Time in Japonica Rice

Floret-opening time (FOT) refers to the time between florets opening and closing within a day, and is a crucial agricultural trait for reproductive development, thermal tolerance and hybrid breeding in rice. However, little is known about the genetic basis and genes controlling FOT in rice. Here, we report the genetic mapping and transcriptome analysis of FOT in the japonica rice cultivar G23. Combining the QTLseqr and GradedPool-seq (GPS) methods, we located a major quantitative trait locus (QTL), qFOT6, on chromosome 6 in multiple years and under different environments. Integrating RNA-seq analysis, we selected 13 potential candidate genes in the qFOT6 interval that might be associated with FOT in G23. Taken together, our work uncovers a major QTL and potential candidate genes for FOT in rice, thus providing invaluable clues for rice breeding.

Quantitative Trait Loci Mapping of Grain Lipid Content in Rice Variety ‘Goudang 3’ Using Genome Re-Sequencing

Fat is the third largest substance in rice seeds, and its content has a great impact on rice cooking, taste and storage qualities. However, few genes related to seed fat content have been cloned, which seriously restricts the application of fat traits in high-quality rice breeding. ‘Goudang 3’ is a representative aromatic rice landrace of Guizhou He, a characteristic rice species resource in Guizhou Province, China. It has the advantages of high fat content, rich flavor, soft and glutinous taste, etc. In this work, to address this issue, from a high-fat content rice variety, Goudang 3, and a low-fat content rice variety, Huazhan, a 148 recombinant inbred lines (RILs) population were derived. A high-density genetic map with 4063 Bin Markers covering 12 chromosomes were constructed through simplified genotyping-by-sequencing (GBS) technology. In combination with fat content, a brown rice fat content quantitative trait loci (QTL) qCFC3 was mapped within the 492 kb interval on chromosome 3. The qCFC3 was consistent with the previous reporting site, and no cloned fat content-related genes have been reported. LOC_Os03g13630 was identified. In conclusion, these QTL and candidate gene can be used for improving rice quality and can lay a foundation for further cloning and functional analysis.

QTL Mapping of Leaf-Related Traits Using a High-Density Bin Map in Brassica rapa

The species Brassica rapa includes enormous leafy vegetables with extreme leaf morphological diversity. Leaf traits such as size, shape, weight, and ratio of the leaf blade to the petiole contribute to yield, appearance, and desirability to consumers. These leaf-related traits are controlled by quantitative trait loci (QTLs). The construction of high-density bin maps using low-coverage sequencing is a powerful method for QTL fine-mapping and gene identification. In this study, we performed whole-genome re-sequencing of Wutacai ‘Zhongbaye’ and Chinese cabbage ‘HN53’ and 150 F2 individuals to construct a high-density bin map for QTL mapping of 11 leaf-related traits. The parental lines and F2 population were re-sequenced at 10x and 1x coverage, respectively. A map containing 565 bin markers was constructed based on parental single-nucleotide polymorphisms and a modified sliding window approach. The total map length was 944.6 cM and the average distance of the bins was 1.65 cM. In total, 60 significant QTLs controlling 11 leaf-related traits were detected. We further identified candidate genes responsible for these complex leaf-related traits. These findings suggest that this cost-effective bin-mapping approach is capable of rapid identification of QTLs and candidate genes, and will thus facilitate the dissection of the underlying molecular basis of leaf morphological variations and accelerate the improvement of B. rapa vegetable breeding.