Quantitative Trait Loci For Traits Research Articles

QTL mapping reveals malt barley quality improvement in two dryland environments associated with extended grain fill and seminal root traits

AbstractTo achieve malt grade and receive full price, barley (Hordeum vulgare L.) crops must meet standards for certain quality traits including percent plump and protein. Terminal drought stress reduces quality and is projected to worsen in barley cultivation areas, underscoring the need for varieties that maintain good malt production with unreliable precipitation. The stay‐green trait extends the grain fill phase between heading and maturity and has been linked to stable quality under dry conditions. However, this relationship can be inconsistent and is not well understood. To effectively leverage a longer grain fill phenotype for drought adaptation, a better grasp of its genetics and environmental interaction is needed. Stay‐green root system differences have been observed and could be at play. We performed correlation and quantitative trait locus (QTL) analysis on grain fill duration, grain quality, and seminal root traits using a recombinant inbred line (RIL) population segregating for stay‐green. Agronomic data were collected in four field trials at two distinct semiarid locations, and roots were measured in a greenhouse assay. Earlier heading and later maturity led to improved quality in both locations and more consistent quality between locations. Earlier heading had a greater influence on quality in the drier environment, while later maturity was more impactful in the less dry environment. We observed co‐locations of seminal root trait QTLs with grain fill duration and grain quality. These QTLs lay the groundwork for further investigation into root phenotypes associated with stay‐green and the deployment of these traits in breeding for drought adaptation.

Unraveling the genetic basis of superior traits in Gossypium barbadense: From phenotype to genotype

G. barbadense is renowned for its high-quality fiber and is highly regarded as a natural material in the textile industry. However, research on cotton has mainly focused on G. hirsutum, and progress in sea island cotton has been relatively slow. There was limited understanding of the genetic loci and transcriptional regulatory mechanisms of important traits, and the genetic basis for the development of superior traits remains unclear. In this study, a recombinant inbred line (RIL) population was constructed using two sea island cotton parents from different cotton regions. The phenotypic characteristics of the two parents and the RIL population, as well as the phenotypic correlations, heritability, and genetic models of the RIL population, were comprehensively analyzed. The RIL population was genotyped using whole-genome resequencing technology, and a high-density intraspecific linkage map was constructed, consisting of 5295 bin markers and a total genetic map distance of 2721.79 centimorgans (cM). Phenotypic data collected from five different environments were used to detect 169 quantitative trait loci (QTLs) using the composite interval mapping method. Among these QTLs, 30 were related to agronomic traits, 61 were related to yield traits, and 78 were related to fiber quality traits. Additionally, 17 QTL clusters were detected, and the additive effects of these clusters explained the correlation between different phenotypic traits. Candidate genes for stable QTLs related to agronomic and yield traits were identified through variant annotation and functional prediction. Two bin markers associated with lint percentage (LP) were validated as potential breeding markers. Furthermore, using RNA-seq data of cotton fiber from the RIL population parents, the dynamic changes in gene expression during different developmental stages of cotton fiber were revealed, and important differentially expressed genes in the secondary cell wall development and metabolism network of fibers were identified. Importantly, through the combined analysis of fiber trait QTLs and transcriptomes, eight candidate genes involved in regulating fiber quality traits were predicted, and the genetic basis of the excellent allele site qFL_D04_1 in the breeding history of Chinese sea island cotton was elucidated. In summary, this study provides new genetic resources and potential breeding markers for cotton variety improvement, valuable theoretical information for understanding the genetic basis of important traits in sea island cotton, and effectively promotes the development of cotton biotechnology breeding.

QTL for the Kinematic Traits That Define the Arabidopsis Root Elongation Zone and Their Relationship to Gravitropism.

Cell expansion in a discrete region called the elongation zone drives root elongation. Analyzing time lapse images can quantify the expansion in kinematic terms as if it were fluid flow. We used horizontal microscopes to collect images from which custom software extracted the length of the elongation zone, the peak relative elemental growth rate (REGR) within it, the axial position of the REGR peak, and the root elongation rate. Automation enabled these kinematic traits to be measured in 1575 Arabidopsis seedlings representing 162 recombinant inbred lines (RILs) derived from a cross of Cvi and Ler ecotypes. We mapped ten quantitative trait loci (QTL), affecting the four kinematic traits. Three QTL affected two or more traits in these vertically oriented seedlings. We compared this genetic architecture with that previously determined for gravitropism using the same RIL population. The major QTL peaks for the kinematic traits did not overlap with the gravitropism QTL. Furthermore, no single kinematic trait correlated with quantitative descriptors of the gravitropism response curve across this population. In addition to mapping QTL for growth zone traits, this study showed that the size and shape of the elongation zone may vary widely without affecting the differential growth induced by gravity.

QTL mapping for the flag leaf-related traits using RILs derived from Trititrigia germplasm line SN304 and wheat cultivar Yannong15 in multiple environments

BackgroundDeveloping and enriching genetic resources plays important role in the crop improvement. The flag leaf affects plant architecture and contributes to the grain yield of wheat (Triticum aestivum L.). The genetic improvement of flag leaf traits faces problems such as a limited genetic basis. Among the various genetic resources of wheat, Thinopyrum intermedium has been utilized as a valuable resource in genetic improvement due to its disease resistance, large spikes, large leaves, and multiple flowers. In this study, a recombinant inbred line (RIL) population was derived from common wheat Yannong15 and wheat-Th. intermedium introgression line SN304 was used to identify the quantitative trait loci (QTL) for flag leaf-related traits.ResultsQTL mapping was performed for flag leaf length (FLL), flag leaf width (FLW) and flag leaf area (FLA). A total of 77 QTLs were detected, and among these, 51 QTLs with positive alleles were contributed by SN304. Fourteen major QTLs for flag leaf traits were detected on chromosomes 2B, 3B, 4B, and 2D. Additionally, 28 QTLs and 8 QTLs for flag leaf-related traits were detected in low-phosphorus and drought environments, respectively. Based on major QTLs of positive alleles from SN304, we identified a pair of double-ended anchor primers mapped on chromosome 2B and amplified a specific band of Th. intermedium in SN304. Moreover, there was a major colocated QTL on chromosome 2B, called QFll/Flw/Fla-2B, which was delimited to a physical interval of approximately 2.9 Mb and contained 20 candidate genes. Through gene sequence and expression analysis, four candidate genes associated with flag leaf formation and growth in the QTL interval were identified.ConclusionThese results promote the fine mapping of QFll/Flw/Fla-2B, which have pleiotropic effects, and will facilitate the identification of candidate genes for flag leaf-related traits. Additionally, this work provides a theoretical basis for the application of Th. intermedium in wheat breeding.

Mapping QTLs for blight resistance and morpho-phenological traits in inter-species hybrid families of chestnut (Castanea spp.).

Chestnut blight (caused by Cryphonectria parasitica), together with Phytophthora root rot (caused by Phytophthora cinnamomi), has nearly extirpated American chestnut (Castanea dentata) from its native range. In contrast to the susceptibility of American chestnut, many Chinese chestnut (C. mollissima) genotypes are resistant to blight. In this research, we performed a series of genome-wide association studies for blight resistance originating from three unrelated Chinese chestnut trees (Mahogany, Nanking and M16) and a Quantitative Trait Locus (QTL) study on a Mahogany-derived inter-species F2 family. We evaluated trees for resistance to blight after artificial inoculation with two fungal strains and scored nine morpho-phenological traits that are the hallmarks of species differentiation between American and Chinese chestnuts. Results support a moderately complex genetic architecture for blight resistance, as 31 QTLs were found on 12 chromosomes across all studies. Additionally, although most morpho-phenological trait QTLs overlap or are adjacent to blight resistance QTLs, they tend to aggregate in a few genomic regions. Finally, comparison between QTL intervals for blight resistance and those previously published for Phytophthora root rot resistance, revealed five common disease resistance regions on chromosomes 1, 5, and 11. Our results suggest that it will be difficult, but still possible to eliminate Chinese chestnut alleles for the morpho-phenological traits while achieving relatively high blight resistance in a backcross hybrid tree. We see potential for a breeding scheme that utilizes marker-assisted selection early for relatively large effect QTLs followed by genome selection in later generations for smaller effect genomic regions.

Identification of candidate genes for early maturity traits by combining BSA-seq and QTL mapping in upland cotton (Gossypiumhirsutum L.)

Cotton breeding for the development of early maturing varieties is an effective way to improve the multiple cropping indexes and alleviate the conflict in cultivated fields between grains and cotton in China. In the present study, we aimed to find upland cotton quantitative trait loci (QTLs) and candidate genes related to early maturity traits, including whole growth period (WGP), flowering timing (FT), node of the first fruiting branch (NFFB), height of the node of the first fruiting branch (HNFFB) and plant height (PH). An early-maturing variety, CCRI50, and a late-maturing variety, Guoxinmian 11 were crossed to obtain biparental populations. These populations were used to map QTLs for the early-maturity traits for two years (2020 and 2021). With BSA-seq analysis based on the data of population 2020, the candidate regions related to early maturity were found to be located on chromosome D03. Then, we developed 22 polymorphic Indel makers to further narrow down the candidate regions, resulting in detection of five and four QTLs in the 2020 and 2021 populations, respectively. According to the results of QTL mapping, two candidate regions (InDel_G286-InDel_G144 and InDel_G24-InDel_G43) were detected. In these regions, three genes (GH_D03G0451, GH_D03G0649, and GH_D03G1180) have non-synonymous mutations in the exon and one gene (GH_D03G0450) has SNP variations in the upstream sequence between CCRI50 and Guoxinmian11. These four genes also showed a dominant expression in the floral organs. The expression of GH_D03G0451, GH_D03G0649 and GH_D03G1180 in CCRI50 was significantly higher than in Guoxinmian11 during the bud differentiation stages, while GH_D03G0450 showed an opposite trend. Further functional verification of GH_D03G0451 showed that the GH_D03G0451-silenced plants showed a delay in the flowering time. These results may suggest that these are the candidate genes for cotton early maturity and may further be used for cotton breeding aiming for early-maturity.

Quantitative trait loci detection for three tiller-related traits and the effects on wheat (Triticum aestivum L.) yields.

A total of 38 putative additive QTLs and 55 pairwise putative epistatic QTLs for tiller-related traits were reported, and the candidate genes underlying qMtn-KJ-5D, a novel major and stable QTL for maximum tiller number, were characterized. Tiller-related traits play an important role in determining the yield potential of wheat. Therefore, it is important to elucidate the genetic basis for tiller number when attempting to use genetic improvement as a tool for enhancing wheat yields. In this study, a quantitative trait locus (QTL) analysis of three tiller-related traits was performed on the recombinant inbred lines (RILs) of a mapping population, referred to as KJ-RILs, that was derived from a cross between the Kenong 9204 (KN9204) and Jing 411 (J411) lines. A total of 38 putative additive QTLs and 55 pairwise putative epistatic QTLs for spike number per plant (SNPP), maximum tiller number (MTN), and ear-bearing tiller rate (EBTR) were detected in eight different environments. Among these QTLs with additive effects, three major and stable QTLs were first documented herein. Almost all but two pairwise epistatic QTLs showed minor interaction effects accounting for no more than 3.0% of the phenotypic variance. The genetic effects of two colocated major and stable QTLs, i.e., qSnpp-KJ-5D.1 and qMtn-KJ-5D, for yield-related traits were characterized. The breeding selection effect of the beneficial allele for the two QTLs was characterized, and its genetic effects on yield-related traits were evaluated. The candidate genes underlying qMtn-KJ-5D were predicted based on multi-omics data, and TraesKN5D01HG00080 was identified as a likely candidate gene. Overall, our results will help elucidate the genetic architecture of tiller-related traits and can be used to develop novel wheat varieties with high yields.

Dissecting the Genetic Basis of Yield Traits and Validation of a Novel Quantitative Trait Locus for Grain Width and Weight in Rice

Grain yield in rice is a complex trait and it is controlled by a number of quantitative trait loci (QTL). To dissect the genetic basis of rice yield, QTL analysis for nine yield traits was performed using an F2 population containing 190 plants, which was developed from a cross between Youyidao (YYD) and Sanfenhe (SFH), and each plant in the population evaluated with respect to nine yield traits. In this study, the correlations among the nine yield traits were analyzed. The grain yield per plant positively correlated with six yield traits, except for grain length and grain width, and showed the highest correlation coefficient of 0.98 with the number of filled grains per plant. A genetic map containing 133 DNA markers was constructed and it spanned 1831.7 cM throughout 12 chromosomes. A total of 36 QTLs for the yield traits were detected on nine chromosomes, except for the remaining chromosomes 5, 8, and 9. The phenotypic variation was explained by a single QTL that ranged from 6.19% to 36.01%. Furthermore, a major QTL for grain width and weight, qGW2-1, was confirmed to be newly identified and was narrowed down to a relatively smaller interval of about ~2.94-Mb. Collectively, we detected a total of 36 QTLs for yield traits and a major QTL, qGW2-1, was confirmed to control grain weight and width, which laid the foundation for further map-based cloning and molecular design breeding in rice.

Comparison of the genetic basis of salt tolerance at germination, seedling, and reproductive stages in an introgression line population of rice.

Salinity is a major limitation for rice farming due to climate change. Since salt stress adversely impact rice plants at germination, seedling, and reproductive stages resulting in poor crop establishment and reduced grain yield, enhancing salt tolerance at these vulnerable growth stages will enhance rice productivity in salinity prone areas. An introgression line (ILs) population from a cross between a high yielding cultivar 'Cheniere' and a salt tolerant donor 'TCCP' was evaluated to map quantitative trait loci (QTLs) for traits associated with salt tolerance at germination, seedling, and reproductive stages. Using a genotyping-by-sequencing based high density SNP linkage map, a total of 7, 16, and 30 QTLs were identified for five germination traits, seven seedling traits, and ten reproductive traits, respectively. There was overlapping of QTLs for some traits at different stages indicating the pleiotropic effects of these QTLs or clustering of linked genes. Candidate genes identified for salt tolerance were OsSDIR1 and SERF for the seedling stage, WRKY55 and OsUBC for the reproductive stage, and MYB family transcription factors for all three stages. Gene ontology analysis revealed significant GO terms related to nucleotide binding, protein binding, protein kinase activity, antiporter activity, active transmembrane transporter activity, calcium-binding protein, and F- box protein interaction domain containing protein. The colocalized QTLs for traits at different growth stages would be helpful to improve multiple traits simultaneously using marker-assisted selection. The salt tolerant ILs have the potential to be released as varieties or as pre-breeding lines for developing salt tolerant rice varieties.

Dissection of a novel major stable QTL on chromosome 7D for grain hardness and its breeding value estimation in bread wheat.

Grain hardness (Gh) is important for wheat processing and end-product quality. Puroindolines polymorphism explains over 60% of Gh variation and the novel genetic factors remain to be exploited. In this study, a total of 153 quantitative trait loci (QTLs), clustered into 12 genomic intervals (C1-C12), for 13 quality-related traits were identified using a recombinant inbred line population derived from the cross of Zhongkemai138 (ZKM138) and Chuanmai44 (CM44). Among them, C7 (harboring eight QTLs for different quality-related traits) and C8 (mainly harboring QGh.cib-5D.1 for Gh) were attributed to the famous genes, Rht-D1 and Pina, respectively, indicating that the correlation of involved traits was supported by the pleotropic or linked genes. Notably, a novel major stable QTL for Gh was detected in the C12, QGh.cib-7D, with ZKM138-derived allele increasing grain hardness, which was simultaneously mapped by the BSE-Seq method. The geographic pattern and transmissibility of this locus revealed that the increasing-Gh allele is highly frequently present in 85.79% of 373 worldwide wheat varieties and presented 99.31% transmissibility in 144 ZKM138-derivatives, indicating the non-negative effect on yield performance and that its indirect passive selection has happened during the actual breeding process. Thus, the contribution of this new Gh-related locus was highlighted in consideration of improving the efficiency and accuracy of the soft/hard material selection in the molecular marker-assisted process. Further, TraesCS7D02G099400, TraesCS7D02G098000, and TraesCS7D02G099500 were initially deduced to be the most potential candidate genes of QGh.cib-7D. Collectively, this study provided valuable information of elucidating the genetic architecture of Gh for wheat quality improvement.

Efficient identification of QTL for agronomic traits in foxtail millet (Setaria italica) using RTM- and MLM-GWAS.

Eleven QTLs for agronomic traits were identified by RTM- and MLM-GWAS, putative candidate genes were predicted and two markers for grain weight were developed and validated. Foxtail millet (Setaria italica), the second most cultivated millet crop after pearl millet, is an important grain crop in arid regions. Seven agronomic traits of 408 diverse foxtail millet accessions from 15 provinces in China were evaluated in three environments. They were clustered into two divergent groups based on genotypic data using ADMIXTURE, which was highly consistent with their geographical distribution. Two models for genome-wide association studies (GWAS), namely restricted two-stage multi-locus multi-allele (RTM)-GWAS and mixed linear model (MLM)-GWAS, were used to dissect the genetic architecture of the agronomic traits based on 13,723 SNPs. Eleven quantitative trait loci (QTLs) for seven traits were identified using two models (RTM- and MLM-GWAS). Among them, five were considered stable QTLs that were identified in at least two environments using MLM-GWAS. One putative candidate gene (SETIT_006045mg, Chr4: 744,701-746,852) that can enhance grain weight per panicle was identified based on homologous gene comparison and gene expression analysis and was validated by haplotype analysis of 330 accessions with high-depth (10×) resequencing data (unpublished). In addition, homologous gene comparison and haplotype analysis identified one putative foxtail millet ortholog (SETIT_032906mg, Chr2:5,020,600-5,029,771) with rice affecting the target traits. Two markers (cGWP6045 and kTGW2906) were developed and validated and can be used for marker-assisted selection of foxtail millet with high grain weight. The results provide a fundamental resource for foxtail millet genetic research and breeding and demonstrate the power of integrating RTM- and MLM-GWAS approaches as a complementary strategy for investigating complex traits in foxtail millet.

Genome-wide Association Study Identifies Candidate Loci with Major Contributions to the Genetic Control of Pod Morphological Traits in Snap Bean

Snap beans are cultivars of common bean (Phaseolus vulgaris) that are cultivated for their fleshy immature pods that exhibit a wide diversity of pod shapes and sizes. The genetic basis of the snap bean pod shape is complex and involves the interaction of multiple genes. This study used a snap bean diversity panel composed of heirloom and improved cultivars used in North America and genome-wide association studies (GWAS) to investigate the genetic basis of pod morphological characteristics, including length, width, height, width/height ratio, and coefficients of variation (CVs). The GWAS detected multiple genomic regions associated with each pod trait, with a total of 20 quantitative trait loci (QTLs) for pod length, 9 for pod width, 14 for pod height, and 10 for pod width/height ratio. Regarding the CV of each pod trait, genome-wide association analyses detected six QTL for length CVs, five for width CVs, 15 for height CVs, and six for width/height ratio CVs. Thirteen regions in seven chromosomes were associated with two or more pod traits. Eighteen QTLs for pod traits in this study colocated with previously reported QTLs for pod and seed traits. The QTL intervals encompass gene models with homologues in other species that are involved in the control of developmental processes. These results capture the complex nature of the genetic control of snap bean pod traits and confirm the significance of genomic regions harboring overlapping QTLs identified in this and other studies. The phenotypic expression of pod traits in snap bean appears to be under the control of a few genomic regions with a strong effect with additional contributions of multiple small-effect regions. Validation of the function of the candidate genes identified in associated regions will contribute to our understanding of legume pod development.

Genome-wide association study reveals 18 QTL for major agronomic traits in a Nordic-Baltic spring wheat germplasm.

Spring wheat (Triticum aestivum L.) remains an important alternative to winter wheat cultivation at Northern latitudes due to high risk of overwintering or delayed sowing of winter wheat. We studied nine major agronomic traits in a set of 299 spring wheat genotypes in trials across 12-year-site combinations in Lithuania, Latvia, Estonia, and Norway for three consecutive years. The dataset analyzed here consisted of previously published phenotypic data collected in 2021 and 2022, supplemented with additional phenotypic data from the 2023 field season collected in this study. We combined these phenotypic datasets with previously published genotypic data generated using a 25K single nucleotide polymorphism (SNP) array that yielded 18,467 markers with a minor allele frequency above 0.05. Analysis of these datasets via genome-wide association study revealed 18 consistent quantitative trait loci (QTL) replicated in two or more trials that explained more than 5% of phenotypic variance for plant height, grain protein content, thousand kernel weight, or heading date. The most consistent markers across the tested environments were detected for plant height, thousand kernel weight, and days to heading in eight, five, and six trials, respectively. No beneficial effect of the semi-dwarfing alleles Rht-B1b and Rht-D1b on grain yield performance was observed across the 12 tested trials. Moreover, the cultivars carrying these alleles were low yielding in general. Based on principal component analysis, wheat genotypes developed in the Northern European region clustered separately from those developed at the southern latitudes, and markers associated with the clustering were identified. Important phenotypic traits, such as grain yield, days to heading, grain protein content, and thousand kernel weight were associated with this clustering of the genotype sets. Interestingly, despite being adapted to the Nordic environment, genotypes in the Northern set demonstrated lower grain yield performance across all tested environments. The results indicate that spring wheat germplasm harbors valuable QTL/alleles, and the identified trait-marker associations might be useful in improving Nordic-Baltic spring wheat germplasm under global warming conditions.

QTL Mapping of Trichome Traits and Analysis of Candidate Genes in Leaves of Wheat (Triticum aestivum L.).

Trichome plays an important role in heat dissipation, cold resistance, water absorption, protection of leaves from mechanical damage, and direct exposure to ultraviolet rays. It also plays an important role in the photosynthesis, transpiration, and respiration of plants. However, the genetic basis of trichome traits is not fully understood in wheat. In this study, wheat DH population (Hanxuan 10 × Lumai 14) was used to map quantitative trait loci (QTL) for trichome traits in different parts of flag leaf at 10 days after anther with growing in Zhao County, Hebei Province, and Taigu County, Shanxi Province, respectively. The results showed that trichome density (TD) was leaf center > leaf tip > leaf base and near vein > middle > edge, respectively, in both environments. The trichome length (TL) was leaf tip > leaf center > leaf base and edge > middle > near vein. Significant phenotypic positive correlations were observed between the trichome-related traits of different parts. A total of 83 QTLs for trichome-related traits were mapped onto 18 chromosomes, and each one accounted for 2.41 to 27.99% of the phenotypic variations. Two QTL hotspots were detected in two marker intervals: AX-95232910~AX-95658735 on 3A and AX-94850949~AX-109507404 on 7D. Six possible candidate genes (TraesCS3A02G406000, TraesCS3A02G414900, TraesCS3A02G440900, TraesCS7D02G145200, TraesCS7D02G149200, and TraesCS7D02G152400) for trichome-related traits of wheat leaves were screened out according to their predicted expression levels in wheat leaves. The expression of these genes may be induced by a variety of abiotic stresses. The results provide the basis for further validation and functional characterization of the candidate genes.

Construction of a High-Density Paulownia Genetic Map and QTL Mapping of Important Phenotypic Traits Based on Genome Assembly and Whole-Genome Resequencing

Quantitative trait locus (QTL) mapping based on a genetic map is a very effective method of marker-assisted selection in breeding, and whole-genome resequencing is one of the useful methods to obtain high-density genetic maps. In this study, the hybrid assembly of Illumina, PacBio, and chromatin interaction mapping data was used to construct high-quality chromosomal genome sequences of Paulownia fortunei, with a size of 476.82 Mb, a heterozygosity of 0.52%, and a contig and scaffold N50s of 7.81 Mb and 21.81 Mb, respectively. Twenty scaffolds with a total length of 437.72 Mb were assembled into 20 pseudochromosomes. Repeat sequences with a total length of 243.96 Mb accounted for 51.16% of the entire genome. In all, 26,903 protein-coding gene loci were identified, and 26,008 (96.67%) genes had conserved functional motifs. Further comparative genomics analysis preliminarily showed that the split of P. fortunei with Tectona grandis likely occurred 38.8 (33.3–45.1) million years ago. Whole-genome resequencing was used to construct a merged genetic map of 20 linkage groups, with 2993 bin markers (3,312,780 SNPs), a total length of 1675.14 cm, and an average marker interval of 0.56 cm. In total, 73 QTLs for important phenotypic traits were identified (19 major QTLs with phenotypic variation explained ≥ 10%), including 10 for the diameter at breast height, 7 for the main trunk height, and 56 for branch-related traits. These results not only enrich P. fortunei genomic data but also form a solid foundation for fine QTL mapping and key marker/gene mining of Paulownia, which is of great significance for the directed genetic improvement of these species.

Detection of trait donors and QTL boundaries for early blight resistance using local ancestry inference in a library of genomic sequences for tomato.

By conducting hierarchical clustering along a sliding window, we generated haplotypes across hundreds of re-sequenced genomes in a few hours. We leveraged our method to define cryptic introgressions underlying disease resistance in tomato (Solanum lycopersicum L.) and to discover resistant germplasm in the tomato seed bank. The genomes of 9 accessions with early blight (Alternaria linariae) disease resistance were newly sequenced and analyzed together with published sequences for 770 tomato and wild species accessions, most of which are available in germplasm collections. Identification of common ancestral haplotypes among resistant germplasm enabled rapid fine mapping of recently discovered quantitative trait loci (QTL) conferring resistance and the identification of possible causal variants. The source of the early blight QTL EB-9 was traced to a vintage tomato named 'Devon Surprise'. Another QTL, EB-5, as well as resistance to bacterial spot disease (Xanthomonas spp.), was traced to Hawaii 7998. A genomic survey of all accessions forecasted EB-9-derived resistance in several heirloom tomatoes, accessions of S. lycopersicum var. cerasiforme, and S. pimpinellifolium PI 37009. Our haplotype-based predictions were validated by screening the accessions against the causal pathogen. There was little evidence of EB-5 prevalence in surveyed contemporary germplasm, presenting an opportunity to bolster tomato disease resistance by adding this rare locus. Our work demonstrates practical insights that can be derived from the efficient processing of large genome-scale datasets, including rapid functional prediction of disease resistance QTL in diverse genetic backgrounds. Finally, our work finds more efficient ways to leverage public genetic resources for crop improvement.

Construction of a genetic map and QTL mapping of seed size traits in soybean.

Soybean seed size and seed shape traits are closely related to plant yield and appearance quality. In this study, 186 individual plants of the F2 generation derived from crosses between Changjiang Chun 2 and JiYu 166 were selected as the mapping population to construct a molecular genetic linkage map, and the phenotypic data of hundred-grain weight, seed length, seed width, and seed length-to-width ratio of soybean under three generations of F2 single plants and F2:3 and F2:4 lines were combined to detect the QTL (quantitative trait loci) for the corresponding traits by ICIM mapping. A soybean genetic map containing 455 markers with an average distance of 6.15cM and a total length of 2799.2cM was obtained. Forty-nine QTLs related to the hundred-grain weight, seed length, seed width, and seed length-to-width ratio of soybean were obtained under three environmental conditions. A total of 10 QTLs were detected in more than two environments with a phenotypic variation of over 10%. Twelve QTL clusters were identified on chromosomes 1, 2, 5, 6, 8, 13, 18, and 19, with the majority of the overlapping intervals for hundred-grain weight and seed width. These results will lay the theoretical and technical foundation for molecularly assisted breeding in soybean seed weight and seed shape. Eighteen candidate genes that may be involved in the regulation of soybean seed size were screened by gene functional annotation and GO enrichment analysis.

Multi-environment association study highlights candidate genes for robust agronomic quantitative trait loci in a novel worldwide Capsicum core collection.

Investigating crop diversity through genome-wide association studies (GWAS) on core collections helps in deciphering the genetic determinants of complex quantitative traits. Using the G2P-SOL project world collection of 10038 wild and cultivated Capsicum accessions from 10 major genebanks, we assembled a core collection of 423 accessions representing the known genetic diversity. Since complex traits are often highly dependent upon environmental variables and genotype-by-environment (G × E) interactions, multi-environment GWAS with a 10195-marker genotypic matrix were conducted on a highly diverse subset of 350 Capsicum annuum accessions, extensively phenotyped in up to six independent trials from five climatically differing countries. Environment-specific and multi-environment quantitative trait loci (QTLs) were detected for 23 diverse agronomic traits. We identified 97 candidate genes potentially implicated in 53 of the most robust and high-confidence QTLs for fruit flavor, color, size, and shape traits, and for plant productivity, vigor, and earliness traits. Investigating the genetic architecture of agronomic traits in this way will assist the development of genetic markers and pave the way for marker-assisted selection. The G2P-SOL pepper core collection will be available upon request as a unique and universal resource for further exploitation in future gene discovery and marker-assisted breeding efforts by the pepper community.

The Construction of a High-Density Genetic Map for the Interspecific Cross of Castanea mollissima × C. henryi and the Identification of QTLs for Leaf Traits

Chinese chestnut is an economically and ecologically valuable tree species that is extensively cultivated in China. Leaf traits play a vital role in the photosynthetic capacity, chestnut yield, and quality, making them important breeding objectives. However, there has been limited research on constructing high-density linkage maps of Chinese chestnut and conducting quantitative trait loci (QTL) analyses for these leaf traits. This knowledge gap has hindered the progress of selection in Chinese chestnut breeding. In this study, we selected a well-established interspecific F1 population, consisting of Castanea mollissima ‘Kuili’ × C. henryi ‘YLZ1’, to construct comprehensive genetic maps for chestnut. Through the use of a genotyping-by-sequencing (GBS) technique, we successfully created a high-density linkage map based on single-nucleotide polymorphisms (SNPs) from the F1 cross. The results showed that 4578 SNP markers were identified in the genetic linkage map, and the total length was 1812.46 cM, which was distributed throughout 12 linkage groups (LGs) with an average marker distance of 0.4 cM. Furthermore, we identified a total of 71 QTLs associated with nine chestnut leaf traits: chlorophyll b content (chlb), stomatal conductance (Gs), leaf area (LA), leaf dry weight (LDW), leaf fresh weight (LFW), leaf length (LL), leaf width (LW), petiole length (PL), and specific leaf weight (SLW). These QTLs were identified based on phenotypic data collected from 2017 to 2018. Notably, among the 71 QTLs, 29 major QTLs were found to control leaf area (LA), leaf dry weight (LDW), and leaf width (LW). The high-density genetic mapping and QTL identification related to leaf traits in this study will greatly facilitate marker-assisted selection (MAS) in chestnut breeding programs.

Association Mapping of Quantitative Trait Loci for Agronomic Traits in a Winter Wheat Collection Grown in Kazakhstan

Central Asia is an important region for the growth of winter wheat, with a cultivation area of more than 15 million hectares (ha). However, the average yield is approximately 3 tons per ha, which is significantly lower than that in developed countries. Therefore, the development of new competitive high-yielding cultivars, including those based on the application of modern molecular genetics tools, is a key priority in winter wheat breeding projects. One of these tools is the result of the identification of new genes and quantitative trait loci (QTLs) for agronomic traits using diverse germplasm panels and genome-wide association studies (GWAS). In this work, a panel of winter wheat accessions was assembled using 115 accessions from Central Asia and 162 samples from other regions of the world. The GWAS, based on a two-year field evaluation of the collection in Kazakhstan’s southern and southeastern regions and 10,481 polymorphic SNP (single-nucleotide polymorphism) markers, allowed for the detection of 173 stable QTLs in nine studied agronomic traits. A survey of the published scientific literature suggests that 23 of these 173 stable QTLs have locations similar to those of previously reported QTLs, supporting the robustness of the research. In addition, 221 and 162 accessions surpassed local standards for grain yield at Kazakhstan’s southern and southeastern stations, respectively. Therefore, this study is an additional contribution to the identification of new QTLs for key agronomic traits and valuable genetic lines in winter wheat breeding projects.