Quantitative Precipitation Forecasts Research Articles

Deep Learning of a 200-member Ensemble with a Limited Historical Training to Improve the Prediction of Extreme Precipitation Events

Abstract This study introduces a deep learning (DL) scheme to generate reliable and skillful probabilistic quantitative precipitation forecasts (PQPFs) in a postprocessing framework. Enhanced machine learning model architecture and training mechanisms are proposed to improve reliability and skill of PQPFs while permitting computationally efficient model fitting using a short training dataset. The methodology is applied to postprocessing of 24h accumulated PQPFs from an ensemble forecast system recently introduced by the Center for Western Weather and Water Extremes (CW3E) and for lead times from one to six days. The ensemble system was designed based on a high-resolution version of the Weather Research and Forecasting (WRF) model, named West-WRF, to produce a 200-member ensemble in near real-time (NRT) over the Western U.S. during the boreal cool seasons to support forecastinformed reservoir operations (FIRO) and studies of prediction of heavy-to-extreme events. Postprocessed PQPFs are compared with those from the raw West-WRF ensemble, the operational Global Ensemble Forecast System (GEFSv12) as well as the ensemble from the European Centre for Medium-Range Weather Forecasts (ECMWF). As an additional baseline, we provide PQPFs verification metrics from a recently developed neural network postprocessing scheme proposed by Ghazvinian et al. (2022). Results demonstrate that skill of postprocessed forecasts significantly outperform PQPFs and deterministic forecasts from raw ensembles and the recently developed algorithm. The resulting PQPFs broadly improve upon the reliability and skill of baselines in predicting heavy to extreme precipitation (e.g., > 75 mm) across all lead times while maintaining the spatial structure of the high-resolution raw ensemble.

Application of Radar-Based Precipitation Data Improves the Effectiveness of Urban Inundation Forecasting

Using radar to estimate and forecast precipitation as input for hydrological models has become increasingly popular in recent years because of its superior spatial and temporal simulation compared with using rain gauge data. This study used radar-based quantitative precipitation estimation (QPE) to select the optimal parameter set for the MIKE URBAN hydrological model and radar-based quantitative precipitation forecasting (QPF) to simulate inundation in Nam Dinh city, Vietnam. The results show the following: (1) radar has the potential to improve the modeling and provide the data needed for real-time smart control if proper bias adjustment is obtained and the risk of underestimated flows after heavy rain is minimized, and (2) the MIKE URBAN model used to calculate two simulation scenarios with rain gauge data and QPE data showed effectiveness in combining the application of radar-based precipitation for the forecasting and warning of urban floods in Nam Dinh city. The results in Scenario 2 with rainfall forecast data from radar provide better simulation results. The average relative error in Scenario 2 is 9%, while the average relative error in Scenario 1 is 15%. Using the grid radar-based precipitation forecasting as input data for the MIKE URBAN model significantly reduces the error between the observed water depth and the simulated results compared with the case using an input rain gauge measured at Nam Dinh station (the difference in inundation level of Scenario 2 using radar-based precipitation is 0.005 m, and it is 0.03 m in Scenario 1). The results obtained using the QPE and QPF radar as input for the MIKE URBAN model will be the basis for establishing an operational forecasting system for the Northern Delta and Midland Regional Hydro-Meteorological Center, Viet Nam Meteorological and Hydrological Administration.

The improvement of short-term quantitative precipitation forecast in mountainous areas by the assimilation of meteorological state variables retrieved by multiple-Doppler radar data

Abstract This study presents a sequential procedure formulated by combining a multiple-Doppler radar wind synthesis technique with a thermodynamic retrieval method, which can be applied to retrieve the three-dimensional wind, pressure, temperature, rainwater mixing ratio, and moisture over complex terrain. The retrieved meteorological state variables are utilized to re-initialize a high-resolution numerical model, which then carries out time integration using four different microphysical (MP) schemes, including the Goddard Cumulus Ensemble (GCE), Morrison (MOR), WRF single-moment 6-class (WSM6), and WRF double-moment 6-class (WDM6) schemes. It is found that through this procedure the short-term quantitative precipitation forecast (QPF) skill of a numerical model over mountainous areas can be significantly improved up to six hours. The moisture field plays a crucial role in producing the correct rainfall forecast. Since no specific microphysical scheme outperforms the others, a combination of various rainfall scenarios forecasted by different MP schemes is suggested in order to provide a stable and reliable rainfall forecast. This work also demonstrates that, with the proposed approach, radar data from only two volume scans are sufficient to improve the rainfall forecasts. This is because the unobserved meteorological state variables are instantaneously retrieved and directly used to re-initialize the model, thereby the model spin-up time can be effectively shortened.

An Assessment of Dropsonde Sampling Strategies for Atmospheric River Reconnaissance

Abstract During a 6-day intensive observing period in January 2021, Atmospheric River Reconnaissance (AR Recon) aircraft sampled a series of atmospheric rivers (ARs) over the northeastern Pacific that caused heavy precipitation over coastal California and the Sierra Nevada. Using these observations, data denial experiments were conducted with a regional modeling and data assimilation system to explore the impacts of research flight frequency and spatial resolution of dropsondes on model analyses and forecasts. Results indicate that dropsondes significantly improve the representation of ARs in the model analyses and positively impact the forecast skill of ARs and quantitative precipitation forecasts (QPF), particularly for lead times > 1 day. Both reduced mission frequency and reduced dropsonde horizontal resolution degrade forecast skill. On the other hand, experiments that assimilated only G-IV data and experiments that assimilated both G-IV and C-130 data show better forecast skill than experiments that only assimilated C-130 data, suggesting that the additional information provided by G-IV data is necessary for improving forecast skill. Although this is a case study, the 6-day period studied encompassed multiple AR events that are representative of typical AR behavior. Therefore, the results indicate that future operational AR Recon missions incorporate daily mission or back-to-back flights, maintain current dropsonde spacing, support high-resolution data transfer capacity on the C-130s, and utilize G-IV aircraft in addition to C-130s.

A tolerant hydrologic technique for real-time selection of optimum QPFs from NWPMs for flood warning applications.

The most important information required to successfully issue a flood warning is the quantitative precipitation forecasts (QPFs). This is important to run subsequent rainfall-runoff simulations. A rainfall-runoff simulation derives its accuracy mainly from the accuracy of the input QPFs. The dynamically based global numerical weather prediction models (NWPMs) are strong candidate sources of QPFs. A main problem is the real-time selection of which NWPM should be used to provide the QPFs for flood warning simulations. This paper develops an automated technique to solve this problem. The technique performs real-time comparisons with measured rainfall fields using a novel 'tolerant' hydrologic approach. The 'tolerant' approach performs the comparison on the basin scale and allows for timing shifts in the forecasts. This is because QPFs can be good but only a few hours early or late. Two events are used for illustration, and the proposed real-time application in flood warning is presented. The developed technique, employing the tolerant approach, could eliminate the effects of the timing shifts and, accordingly, succeeded to select the QPFs to be used. A Python package was developed for automation. The developed technique is expected to also be useful for offline assessments of historical performances of NWPMs.

Classification of Warm-Season Precipitation in High-Resolution Rapid Refresh (HRRR) Model Forecasts over the Contiguous United States

Abstract This study uses the convective adjustment time scale to identify the climatological frequency of equilibrium and nonequilibrium convection in different parts of the contiguous United States (CONUS) as modeled by the operational convection-allowing High-Resolution Rapid Refresh (HRRR) forecast system. We find a qualitatively different climatology in the northern and southern domains separated by the 40°N parallel. The convective adjustment time scale picks up the fact that convection over the northern domains is governed by synoptic flow (leading to equilibrium), while locally forced, nonequilibrium convection dominates over the southern domains. Using a machine learning algorithm, we demonstrate that the convective adjustment time-scale diagnostic provides a sensible classification that agrees with the underlying dynamics of equilibrium and nonequilibrium convection. Furthermore, the convective adjustment time scale can indicate the model quantitative precipitation forecast (QPF) quality, as it correctly reflects the higher QPF skill for precipitation under strong synoptic forcing. This diagnostic based on the strength of forcing for convection will be employed in future studies across different parts of CONUS to objectively distinguish different weather situations and explore the potential connection to warm-season precipitation predictability. Significance Statement An objective classification metric that can delineate a wide range of forecasts into distinct scenarios can serve as a valuable tool. This study represents a pioneering effort in utilizing the convective adjustment time scale to identify the climatological frequency of warm-season precipitation under varying levels of synoptic forcing in different parts of the contiguous United States (CONUS). The results demonstrate that the convective adjustment time scale is a robust metric for categorizing precipitation events and establishing a direct link to their predictability. Overall, this study provides a valuable framework for future studies focused on the CONUS domain, offering guidance on how to employ the convective adjustment time scale to classify weather regimes and explore the influence of environmental conditions on predictability of convection.

Development of Synoptic Analogue Model for Quantitative Precipitation Forecast over Cauvery basin, India

Daily Average Areal Precipitation (AAP) data of South West Monsoon Season for 2012 to 2020 in respect of sub-basins of Cauvery river basin were collected alongwith synoptic systems causing rainfall in the sub-basins. Five synoptic systems namely Depression/Deep Depression, low/well marked low(WML) pressure area, Upper air cyclonic circulations(UAC), off-shore trough(OST)/OST with embedded cyclonic circulations, east-west shear zone are considered in the study. Rainfall(AAP) caused by these systems considered are 11-25mm, 26-50mm, 51-100mm and > 100mm. Number of days for which these systems caused rainfall under each range was computed. The rainfall range with highest frequency for the particular system is taken as Synoptic Analogue Model. OST/OST with embedded cyclonic circulation has contributed significantly to rainfall in all the sub-basins. Depression/Deep Depression over Rayalaseema, Tamil Nadu and Pondicherry, South Interior Karnataka or North Interior Karnataka provides > 50mm rainfall in Harangi basin. Depression/Deep Depression over Rayalaseema, Tamil Nadu and Pondicherry, South Interior Karnataka or North Interior Karnataka provides > 50mm rainfall in Harangi basin. Low/Well Marked Low over Telangana provides > 50mm rainfall in Hemavathy basin. Upper Air Cyclonic circulation(UAC) over Rayalaseema provides > 50mm rainfall in Kabini basin. UAC over Rayalaseema, South East Bay of Bengal or West Central Bay of Bengal off Coastal Andhra Pradesh leads to >100 mm rain in Harangi. UAC over Coastal Karnataka and North Interior Karnataka or OST from Konkan Goa/Maharashtra to Karnataka leads to >100 mm rain in Upper Vaigai.
 
 Key words- Aerial Average Precipitation, QPF, Cauvery river basin, Synoptic Analogue Model

Evaluation of High-Intensity Precipitation Prediction Using Convolutional Long Short-Term Memory with U-Net Structure Based on Clustering

Recently, Asia has experienced significant damage from extreme precipitation events caused by climate change. Improving the accuracy of quantitative precipitation forecasts over wide regions is essential to mitigate the damage caused by precipitation-related natural disasters. This study compared the predictive performances of a global model trained on the entire dataset and a clustered model that clustered precipitation types. The precipitation prediction model was constructed by combining convolutional long short-term memory with a U-Net structure. Research data consisted of precipitation events recorded at 10 min intervals from 2017 to 2021, utilizing radar data covering the entire Korean Peninsula. The model was trained on radar precipitation data from 30 min before the current time (t − 30 min, t − 20 min, t − 10 min, and t − 0 min) to predict the precipitation after 10 min (t + 10 min). The prediction performance was assessed using the root mean squared error and mean absolute error for continuous precipitation data and precision, recall, F1 score, and accuracy for the presence or absence of precipitation. The research findings indicate that, with sufficient training data for each precipitation type, models trained on clustered precipitation types outperform those trained on the entire dataset, particularly for predicting high-intensity precipitation events.

Paired Satellite and NWP Precipitation for Global Flood Forecasting

Abstract Precipitation data are known to be the key driver of hydrological simulations. Hence, reliable quantitative precipitation estimates and forecasts are vital for accurate hydrological forecasting. Satellite-based precipitation estimates from Integrated Multi-satellitE Retrievals for GPM Early Run (IMERG-E) and forecasted precipitation from NASA’s Goddard Earth Observing System Forward Processing (GEOS-FP) have shown values in global flood nowcasting and forecasting. However, few studies have comprehensively evaluated their hydrological performance let alone explored the potential value of combining them. Therefore, this study undertakes a quasi-global evaluation of their utility in real-time hydrological monitoring and 1–5-day forecasting with the Dominant River Tracing-Routing Integrated with Variable Infiltration Capacity (VIC) Environment (DRIVE) model. The gauge-corrected IMERG Final Run precipitation estimates and corresponding hydrological simulation are used as the references. Results showed that the hit bias is the dominant error source of IMERG-E, while the false precipitation is more noticeable in GEOS-FP. In terms of hydrological performance, the GEOS-FP-driven model (DRIVE-FP) performance is close to the IMERG-E-driven model (DRIVE-E) performance on day 1, indicating that GEOS-FP could nicely fill the gap of nowcasting caused by the IMERG-E time latency. For longer lead-time forecasts, the bias tends to diminish in most regions, likely because the under- or overestimation in IMERG-E is generally offset by the distinct types of misestimation in GEOS-FP. The skillful initial hydrological conditions present outperformed forecasts in most regions, except for tropical areas where the accuracy of GEOS-FP prevails. Overall, this study provides a valuable view of the combined use of IMERG-E and GEOS-FP precipitation in the context of hydrological nowcasts and forecasts.

Assimilation of 3D polarimetric microphysical retrievals in a convective-scale NWP system

Abstract. This study assimilates for the first time polarimetric C-band radar observations from the German meteorological service (DWD) into DWD's convective-scale model ICON-D2 using DWD's ensemble-based KENDA assimilation framework. We compare the assimilation of conventional observations (CNV) with the additional assimilation of radar reflectivity Z (CNV + Z), with the additional assimilation of liquid or ice water content (LWC or IWC) estimates below or above the melting layer instead of Z where available (CNV + LWC/Z or CNV + IWC/Z respectively). Hourly quantitative precipitation forecasts (QPF) are evaluated for two stratiform and one convective rainfall events in the summers of 2017 and 2021. With optimized data assimilation settings (e.g., observation errors), the assimilation of LWC mostly improves first-guess QPF compared with the assimilation of Z alone (CNV + Z), whereas the assimilation of IWC does not, especially for convective cases, probably because of the lower quality of the IWC retrieval in these situations. Improvements are, however, notable for stratiform rainfall in 2021, for which the IWC estimator profits from better specific differential phase estimates owing to a higher radial radar resolution than the other cases. The assimilation of all radar data sets together (CNV + LWC + IWC + Z) yields the best first guesses. All assimilation configurations with radar information consistently improve deterministic 9 h QPF compared with the assimilation of only conventional data (CNV). Forecasts based on the assimilation of LWC and IWC retrievals on average slightly improve Fraction Skill Score (FSS) and Frequency Bias (FBI) compared with the assimilation of Z alone (CNV + Z), especially when LWC is assimilated for the 2017 convective case and when IWC is assimilated for the high-resolution 2021 stratiform case. However, IWC assimilation again degrades forecast FSS for the convective cases. Forecasts initiated using all radar data sets together (CNV + LWC + IWC + Z) yield the best FSS. The development of IWC retrievals that are more adequate for convection constitutes one next step to further improving the exploitation of ice microphysical retrievals for radar data assimilation.

Impact of Urban Representation on Simulation of Hurricane Rainfall

AbstractTaking the examples of Hurricane Florence (2018) over the Carolinas and Hurricane Harvey (2017) over the Texas Gulf Coast, the study attempts to understand the performance of slab, single‐layer Urban Canopy Model (UCM), and Building Environment Parameterization (BEP) in simulating hurricane rainfall using the Weather Research and Forecasting (WRF) model. The WRF model simulations showed that for an intense, large‐scale event such as a hurricane, the model quantitative precipitation forecast over the urban domain was sensitive to the model urban physics. The spatial and temporal verification using the modified Kling‐Gupta efficiency and Method for Object based Diagnostic and Evaluation in Time Domain suggests that UCM performance is superior to the BEP scheme. Additionally, using the BEP urban physics scheme over UCM for landfalling hurricane rainfall simulations has helped simulate heavy rainfall hotspots.

Towards the selection of a longer record of quantitative precipitation forecast dataset from TIGGE ensembles for India during the monsoon season

ABSTRACT A reliable forecast of summer monsoon precipitation is crucial in India. To select a longer record of forecast data from the THORPEX Interactive Grand Global Ensemble (TIGGE) archives, we applied two criteria: the length of the dataset should be at least 10 years of continuous record, and the forecast product should have at least 20 ensemble members for a lead time of minimum 5 days. We evaluate the ensemble quantitative precipitation forecasts (QPFs) obtained from the four agencies throughout the monsoon season (June to September) from 2011 to 2020 in 22 river basins of India in forecasting normal and extreme precipitation events. The Integrated Multi-satellite Retrievals for Global Precipitation Measurement (IMERG) is used as observation data. The proficiency of QPFs is evaluated using six criteria from deterministic, dichotomous, and probabilistic error statistics. The error values are classified into three categories – low, moderate, and high. A Forecast Reliability Index is formulated using the given four QPFs, and three categories for each of the six error statistics to answer (a) which QPF shows better performance in which river basin and (b) whether any conclusion can be made on the overall performance of a QPF for all the River Basins of India.

Assessing the ability of a new seamless short-range ensemble rainfall product to anticipate flash floods in the French Mediterranean area

Abstract. Flash floods have dramatic economic and social consequences, and efficient adaptation policies are required to reduce their impacts, especially in the context of global change. Developing more efficient flash flood forecasting systems can largely contribute to these adaptation requirements. The aim of this study was to assess the ability of a new seamless short-range ensemble quantitative precipitation forecast (QPF) product, called PIAF-EPS (Prévision Immédiate Agrégée Fusionnée ensemble prediction system) and recently developed by Météo-France, to predict flash floods when used as input to an operational hydrological forecasting chain. For this purpose, eight flash flood events that occurred in the French Mediterranean region between 2019 and 2021 were reanalysed, using a hydrological-modelling chain similar to the one implemented in the French Vigicrues Flash operational flash flood monitoring system. The hydrological forecasts obtained from PIAF-EPS were compared to the forecasts obtained with different deterministic QPFs from which PIAF-EPS is directly derived. The verification method applied in this work uses scores calculated on contingency tables and combines the forecasts issued on each 1 km2 pixel of the territory. This offers a detailed view of the forecast performances, covering the whole river network and including the small ungauged rivers. The results confirm the added value of the ensemble PIAF-EPS approach for flash flood forecasting, in comparison to the different deterministic scenarios considered.

Improving AHI Radiance Assimilation over Land with the Surface Skin Temperature Constrained by Station Observations and Its Impact for Quantitative Precipitation Forecasts

Abstract In this study, a new way to assimilate clear-sky Advanced Himawari Imager (AHI) surface-sensitive brightness temperature (TB) observations over land is investigated for improving quantitative precipitation forecasts (QPFs) in eastern China. To alleviate problems arising from inaccurate surface temperature in radiance simulations, surface station observations of land surface skin temperature (LSST) together with conventional and AMSU-A observations are assimilated to improve AHI surface-sensitive TB simulations of the Community Radiative Transfer Model (CRTM) before AHI data assimilation. First, the Gridpoint Statistical Interpolation (GSI) three-dimensional variational (3DVar) system is updated with the additional control variable of surface temperature and its background error covariances. Second, surface temperature and emissivity sensitivity checks are designed for the quality control of the surface-sensitive AHI channels. Finally, the impacts of a two-time data assimilation strategy are assessed for a local convection rainfall case and a synoptic-scale precipitation case. The experiment in which AHI data are assimilated after assimilating LSST data (ExpL2) outperforms the traditional experiment in which the LSST is not updated (ExpL) in terms of its 24-h QPF skill score. A better description of atmospheric instability and moisture convergence forcing is obtained in ExpL2 than in ExpL. Both experiments show additional low-level temperature and humidity adjustments compared to the experiment that does not assimilate AHI surface-sensitive channels (ExpNL). Lower AHI TB simulation biases are found in the ExpL2 experiment, which improve the analyzed field and subsequent QPFs. The results in this study suggest the importance of proper utilization of LSST observations for AHI surface-sensitive TB assimilations over land.

Landslide initiation thresholds in data-sparse regions: application to landslide early warning criteria in Sitka, Alaska, USA

Abstract. Probabilistic models to inform landslide early warning systems often rely on rainfall totals observed during past events with landslides. However, these models are generally developed for broad regions using large catalogs, with dozens, hundreds, or even thousands of landslide occurrences. This study evaluates strategies for training landslide forecasting models with a scanty record of landslide-triggering events, which is a typical limitation in remote, sparsely populated regions. We evaluate 136 statistical models trained on a precipitation dataset with five landslide-triggering precipitation events recorded near Sitka, Alaska, USA, as well as > 6000 d of non-triggering rainfall (2002–2020). We also conduct extensive statistical evaluation for three primary purposes: (1) to select the best-fitting models, (2) to evaluate performance of the preferred models, and (3) to select and evaluate warning thresholds. We use Akaike, Bayesian, and leave-one-out information criteria to compare the 136 models, which are trained on different cumulative precipitation variables at time intervals ranging from 1 h to 2 weeks, using both frequentist and Bayesian methods to estimate the daily probability and intensity of potential landslide occurrence (logistic regression and Poisson regression). We evaluate the best-fit models using leave-one-out validation as well as by testing a subset of the data. Despite this sparse landslide inventory, we find that probabilistic models can effectively distinguish days with landslides from days without slide activity. Our statistical analyses show that 3 h precipitation totals are the best predictor of elevated landslide hazard, and adding antecedent precipitation (days to weeks) did not improve model performance. This relatively short timescale of precipitation combined with the limited role of antecedent conditions likely reflects the rapid draining of porous colluvial soils on the very steep hillslopes around Sitka. Although frequentist and Bayesian inferences produce similar estimates of landslide hazard, they do have different implications for use and interpretation: frequentist models are familiar and easy to implement, but Bayesian models capture the rare-events problem more explicitly and allow for better understanding of parameter uncertainty given the available data. We use the resulting estimates of daily landslide probability to establish two decision boundaries that define three levels of warning. With these decision boundaries, the frequentist logistic regression model incorporates National Weather Service quantitative precipitation forecasts into a real-time landslide early warning “dashboard” system (https://sitkalandslide.org/, last access: 9 October 2023). This dashboard provides accessible and data-driven situational awareness for community members and emergency managers.

Quantitative precipitation forecast for the Godavari basin using the Synoptic analogue method

In the present study, we have constructed a frequency of occurrence of rainfall over each sub-catchment of the Godavari river catchment using the synoptic analogue method for the years 2012-2019. Using the Frequency of the Areal average precipitations the model is verified for the AAP of the synoptic situations for the years 2020. The model has observed the 62% percentage of correct for the monsoon season 2020 and it gives the 90% correct to 50-100 and >100 AAP events. Using the frequency of the AAP events w have constructed the percentage of probability of the AAP of the synoptic events which occur over the Sub-basin. This model is generally accurate for the generation of QPF before the 24hr provided the synoptic conditions over the Region which will be very helpful to facilitate the 48hrs forecast to the flood forecasters and end-users like the central Water commission and Disaster management authorities.

Was the extreme rainfall that caused the August 2022 flood in Pakistan predictable?

Pakistan suffered from severe floods in the past, but in August 2022, the country experienced exceptional extreme rainfall events that caused widespread and catastrophic flooding. The 2022 flood affected all aspects of socio-economic lives including agriculture, infrastructure, and mortality of humans and livestock. The two-day accumulated extreme rainfall on 17–18 August was anomalous and contributed the most to the flood in the southern provinces of Pakistan. The damage caused by extreme rainfall and the subsequent flooding has raised questions regarding the predictability of extreme rainfall by the existing weather forecasting models. Here, we use ensemble forecasts from four numerical weather prediction models under THORPEX Interactive Grand Global Ensemble datasets to examine the predictability of extreme rainfall at a six-day lead. The extreme precipitation during 17–18 August 2022 was predictable a week before the event that contributed the most to the flooding. All the forecast models provided an early warning at a six-day lead time. UK Meteorological Office and European Centre for Medium-Range Weather Forecasts models produced comparable results to observations at all the lead times. Our findings highlight that an integrated framework of extended quantitative precipitation forecasts and hydrological modeling can help reduce the country’s flood vulnerability and risk associated with it.

Unraveling the 2021 Central Tennessee flood event using a hierarchical multi-model inundation modeling framework

Flood prediction systems need hierarchical atmospheric, hydrologic, and hydraulic models to predict rainfall, runoff, streamflow, and floodplain inundation. The accuracy of such systems depends on the error propagation through the modeling chain, sensitivity to input data, and choice of models. In this study, we used multiple precipitation forcings (hindcast and forecast) to drive hydrologic and hydrodynamic models to analyze the impacts of various drivers on the estimates of flood inundation depth and extent. We implement this framework to unravel the August 2021 extreme flooding event that occurred in Central Tennessee, USA. We used two radar-based quantitative precipitation estimates (STAGE4 and MRMS) as well as quantitative precipitation forecasts (QPF) from the National Weather Service Weather Prediction Center (WPC) to drive a series of models in the hierarchical framework, including the Variable Infiltration Capacity (VIC) land surface model, the Routing Application for Parallel Computation of Discharge (RAPID) river routing model, and the AutoRoute and TRITON inundation models. An evaluation with observed high-water marks demonstrates that the framework can reasonably simulate flood inundation. Despite the complex error propagation mechanism of the modeling chain, we show that inundation estimates are most sensitive to rainfall estimates. Most notably, QPF significantly underestimates flood magnitudes and inundations leading to unanticipated severe flooding for all stakeholders involved in the event. Finally, we discuss the implications of the hydrodynamic modeling framework for real-time flood forecasting.

Conditional Ensemble Model Output Statistics for Postprocessing of Ensemble Precipitation Forecasting

Abstract Forecasts produced by EPSs provide the potential state of the future atmosphere and quantify uncertainty. However, the raw ensemble forecasts from a single EPS are typically characterized by underdispersive predictions, especially for precipitation that follows a right-skewed gamma distribution. In this study, censored and shifted gamma distribution ensemble model output statistics (CSG-EMOS) is performed as one of the state-of-the-art methods for probabilistic precipitation postprocessing across China. Ensemble forecasts from multiple EPSs, including the European Centre for Medium-Range Weather Forecasts, the National Centers for Environmental Prediction, and the Met Office, are collected as raw ensembles. A conditional CSG EMOS (Cond-CSG-EMOS) model is further proposed to calibrate the ensemble forecasts for heavy-precipitation events, where the standard CSG-EMOS is insufficient. The precipitation samples from the training period are divided into two categories, light- and heavy-precipitation events, according to a given precipitation threshold and prior ensemble forecast. Then individual models are, respectively, optimized for adequate parameter estimation. The results demonstrate that the Cond-CSG-EMOS is superior to the raw EPSs and the standard CSG-EMOS, especially for the calibration of heavy-precipitation events. The spatial distribution of forecast skills shows that the Cond-CSG-EMOS outperforms the others over most of the study region, particularly in North and Central China. A sensitivity testing on the precipitation threshold shows that a higher threshold leads to better outcomes for the regions that have more heavy-precipitation events, i.e., South China. Our results indicate that the proposed Cond-CSG-EMOS model is a promising approach for the statistical postprocessing of ensemble precipitation forecasts. Significance Statement Heavy-precipitation events are of highly socioeconomic relevance. But it remains a great challenge to obtain high-quality probabilistic quantitative precipitation forecasting (PQPF) from the operational ensemble prediction systems (EPSs). Statistical postprocessing is commonly used to calibrate the systematic errors of the raw EPSs forecasts. However, the non-Gaussian nature of precipitation and the imbalance between the size of light- and heavy-precipitation samples add to the challenge. This study proposes a conditional postprocessing method to improve PQPF of heavy precipitation by performing calibration separately for light and heavy precipitation, in contrast to some previous studies. Our results indicate that the conditional model mitigates the underestimation of heavy precipitation, as well as with a better calibration for the light- and moderate-precipitation.

Assessments of Use of Blended Radar–Numerical Weather Prediction Product in Short-Range Warning of Intense Rainstorms in Localized Systems (SWIRLS) for Quantitative Precipitation Forecast of Tropical Cyclone Landfall on Vietnam’s Coast

This research presents a blended system implemented by the Vietnam National Center for Hydro-Meteorological Forecasting to enhance the nowcasting and forecasting services of quantitative precipitation forecasts (QPFs) of tropical cyclone (TC) landfalls on Vietnam’s coast. Firstly, the extrapolations of rain/convective systems from multiple radars in Vietnam in ranges up to 6 h were carried out using Short-Range Warning of Intense Rainstorms in Localized Systems (SWIRLS) developed by the Hong Kong Observatory. Secondly, the forecast from the numerical weather prediction (NWP) system, based on the WRF-ARW model running at 3 km horizontal resolution, was blended with radar-based quantitative precipitation estimates and nowcasts of SWIRLS. The analysis showed that the application of the nowcast system to TC-related cloud forms is complicated, which is related to the TC’s evolution and the different types and multiple layers of storm clouds that can affect the accuracy of the derived motion fields in nowcast systems. With hourly accumulated rainfall observation, skill score validation conducted for several TCs that landed in the center of Vietnam demonstrated that the blending of nowcasting and NWP improve the quality of the QPFs of TCs in forecast ranges up to 3 h compared to the pure NWP forecasts.