Quality Of White Salted Noodles Research Articles

Effect of NaCl on rheological properties of dough and noodle quality

To assess the effect of NaCl on processing properties of different varieties of wheat flour and noodle quality, the rheological properties of dough, and the quality of white salted noodles made from three different varieties of wheat flour were evaluated. The results showed that the addition of NaCl had different effects on the rheological properties of different varieties of wheat flour. As NaCl concentration increased, the stability time of both intermediate-gluten and weak-gluten wheat flour increased, while that of strong-gluten wheat flour increased initially and then remained stable. The developing time of strong-gluten wheat flour increased, while those of both intermediate-gluten and weak-gluten wheat flour did not change significantly. The energy values of intermediate- and weak-gluten wheat flour did not change significantly while that of strong-gluten wheat flour increased. NaCl had no apparent effects on the hardness, springiness, gumminess, chewiness and resilience of noodles. The cooking loss of fresh noodles increased positively with increasing NaCl concentration. Microstructure of noodles showed that gluten network structure of noodles became more and more dense with increasing NaCl concentration. The effect of NaCl on gluten protein contributed to the change of rheological properties and noodle quality.

Effects of different fertilization treatments on the physicochemical and noodle-making properties of Korean winter wheat cultivars.

Changes in the quality of white salted noodles prepared with different types of Korean winter wheat were examined. Crude protein and amylose contents of various wheat cultivars ranged from 7.17 to 9.97 and 24.78 to 29.37%, respectively. The water holding capacities of Jokyung with base N-fertilizer (NF) and Keumkang with 40% increased NF compared with NF at the supplementary manuring (SM) were 95.70 and 70.69%, respectively. The dry gluten content of the Keumkang with 20% increased NF compared with SM at the panicle initiation stage (PS) was 12.5%, and the final viscosities of several cultivars with NF, PS, and SM did not differ. PS treatment increased the thickness of the noodle sheet, and the hardnesses of cooked noodles prepared using Goso, Baekjoong, Younbaek, and Keumkang wheat with PS or SM treatment were increased. The thickness was strongly positively correlated with dry gluten content (DG) and water binding in wet gluten. In order to improve the quality of fresh noodles, wheat flour prepared using Hojung, Goso, and Baekjoong cultivars under PS cultivation condition or wheat flour with higher protein content, DG contents, and WBG should be used.

Characteristics and Protein Subunit Composition of Flour Mill Streams from Different Commercial Wheat Classes and Their Relationship to White Salted Noodle Quality

Proximate characteristics and protein compositions of selected commercial flour streams of three Australian and two U.S. wheats were investigated to evaluate their effects on the quality of white salted noodles. Wheat proteins of flour mill streams were fractionated into salt‐soluble proteins, sodium dodecyl sulfate (SDS)‐soluble proteins, and SDS‐insoluble proteins with a sequential extraction procedure. SDS‐soluble proteins treated by sonication were subsequently separated by nonreducing SDS polyacrylamide gel electrophoresis (SDS‐PAGE). There was a substantial amount of variation in distributions of protein content and protein composition between break and reduction mill streams. SDS‐insoluble proteins related strongly to differences in protein quantity and quality of flour mill streams. The soluble protein extracted by SDS buffer included smaller glutenin aggregates (SDS‐soluble glutenin) and monomeric proteins, mainly gliadin (α‐, β‐, γ‐, and ω‐types) and albumin and globulin. SDS‐soluble proteins of different flour mill streams had similar protein subunit composition but different proportions of the protein subunit groups. Noodle brightness (L) decreased and redness (a) increased with increased SDS‐insoluble protein and decreased monomeric gliadin. Noodle cooking loss and cooking weight gain decreased with increased glutenin aggregate (SDS‐soluble glutenin and SDS‐insoluble glutenin) and decreased monomeric gliadin. Noodle hardness, springiness, cohesiveness, gumminess, chewiness, tensile strength, breaking length, and area under the tensile strength versus breaking length curve increased with increased glutenin aggregate. Monomeric gliadin contributed differently to texture qualities of cooked noodles from glutenin aggregate. Monomeric albumin and globulin were not related to noodle color attributes (except redness), noodle cooking quality, and texture qualities of cooked noodles. The results suggested that variation in protein composition of flour mill streams was strongly associated with noodle qualities.

Effect of Compositional Variation of Gluten Proteins and Rheological Characteristics of Wheat Flour on the Textural Quality of White Salted Noodles

Protein quality parameters of wheat flour, as well as protein content, showed significant relationship with hardness, cohesiveness, springiness, adhesiveness, chewiness, and gumminess of the cooked noodles. A significant positive correlation (0.54) was observed between glutenins and hardness of noodles. Chewiness of the noodles increased with the protein content, sodium dodecyl sulfate sedimentation volume, dough development time, dough stability, and glutenins. Hardness, springiness, cohesiveness, gumminess, and chewiness of the noodles were negatively affected by gliadin to glutenin ratio. Multiple regression analysis depicted significant relationships of the various noodle quality parameters with wheat flour characteristics. The results revealed that the relative composition of the gliadins and glutenins had a considerable effect on the textural profile of noodles indicating their defining contribution on the noodle quality. The resulting information could be useful in predicting the noodle-quality potential of the varieties.

Influence of Allelic Variations of Glutenin and Puroindloine on Flour Composition, Dough Rheology and Quality of White Salted Noodles from Korean Wheat Cultivars

Allelic variations in glutenin and puroindolines of 26 Korean wheat cultivars were evaluated to determine their effects on the physicochemical properties of flour and quality of white salted noodles. Cultivars carrying Pina-D1b and Pinb-D1b exhibited a coarser particle size of wheat flour and a higher ash and damaged starch content than those with Pina-D1a and Pinb-D1a. Glu-B1b, Glu-D1f, Glu-B3d and Pina-D1a alleles exhibited lower protein content than other alleles. Glu-A1c, Glu-B1b, Glu-D1f Glu-B3d, Glu-B3i and Pinb-D1b alleles appeared to be related to a lower SDS-sedimentation volume than other alleles. In dough rheological properties, Glu-A1a and Glu-D1d alleles showed a longer mixing time on the mixograph and maximum dough height but Glu-A3e and Glu-B3i alleles had a lower mixing time on the mixograph and a lower maximum dough height than other alleles at Glu-1 and Glu-3 loci. Regarding the quality of white salt noodles, about 10% of the variations in the hardness of cooked noodles were explained by Glu-A1 and Glu-B3 loci. Hardness rankings of cooked noodles were Glu-A1a > Glu-A1c > Glu-A1c at the Glu-A1 locus. Glu-B3h showed higher cooked noodle hardness (5.10 N) than other alleles at the Glu-B3 locus (< 4.66 N).

White salted noodle characteristics from transgenic isolines of wheat over expressing puroindolines

The closely linked genes puroindoline a ( Pina) and puroindoline b ( Pinb) control most of the variation in wheat ( Triticum aestivum) grain texture. Mutations in either Pina or Pinb result in hard grain with wild type forms of both genes giving soft grain. Asian noodles are prepared from both hard and soft classes of wheat. Our objective was to examine color and texture characteristics of white salted noodles processed from flours of transgenic isolines of Hi-Line hard red spring wheat over expressing Pina-D1a, Pinb-D1a or both and a control giving a range in grain texture from very soft to hard. White salted noodles were prepared and color and texture characteristics were measured. The three softer textured transgenic isolines showed greater change in L ∗ with time than Hi-Line. The noodles were more adhesive (more negative value), firmer, and chewier as the grain texture became successively softer when cooked at 5 min. These texture differences were not as apparent when noodles were cooked for an optimum time. Starch pasting properties did not explain the noodle textural differences. A possible explanation for the noodle texture differences may be related to starch damage which ranged from 2.2% for HGAB to 6.7% for Hi-Line, flour particle size differences and subsequent water absorption differences among the four genotypes. Over expression of puroindolines did not enhance quality of white salted noodles when prepared under these conditions.

Effects of Added Minerals on Pasting of Partial Waxy Wheat Flour and Starch and on Noodle Making Properties

ABSTRACTMineral content, as determined and expressed by ash content, serves as an index of wheat flour quality for flour millers and food manufacturers who prefer flour of low mineral content, even though the significance of mineral content on the functional properties of wheat flour is not well understood. We explored whether minerals have any influence on the functional properties of wheat flour and product quality of white salted noodles. Ash, obtained by incinerating wheat bran, was incorporated into two hard white spring wheat flours and their starches to raise the total ash content to 1, 1.5, or 2%. Pasting properties were determined using a rapid visco analyzer (RVA). Addition of ash increased the peak viscosity of the flours in both water and buffer solution but did not affect the peak viscosity of starch. Wheat flours with added ash showed lower pasting temperature by approximately 10°C in buffer solution. Mineral extracts (15.3% ash) isolated from wheat bran, when added to increase the ash content of wheat flour and starch to 2%, increased the peak viscosity and lowered the pasting temperature of flour by 13.2–16.3% but did not affect the pasting properties of the isolated starch. The mineral premix also increased peak viscosity of wheat flour but not in starch. Added ash increased noodle thickness and lowered water retention of cooked noodles while it exhibited no significant effect on cooked noodle texture as determined using a texture analyzer.

Quantitative assessment of protein fractions of Chinese wheat flours and their contribution to white salted noodle quality

Protein quantity and quality play a significant contribution to white salted noodle processing. The objective of this study was to determine the contribution of different protein fractions to 25 Chinese varieties on wheat based noodle quality. The results showed: the average ratio of monomeric protein, soluble glutenin and insoluble glutenin in Chinese Huanghuai winter wheat was 3.7:1.0:1.8. Compared with Canadian wheat varieties, the ratio was 4.4:1.0:2.0. The monomeric protein and insoluble glutenin were lower in the Chinese varieties, the soluble glutenin content was higher; while the dough character was lower than Canadian hard wheat, but most Chinese wheat can make good quality noodles. This may be the defining difference between noodle wheat and bread wheat. The monomeric protein content was significant positive correlated with fresh noodle maximum resistance, and high significant positive with extension distance and area. The soluble and insoluble glutenin were mainly responsible in fresh noodle maximum resistance, extension distance and using a texture analyzer, but were high negative correlated with fresh noodle sheet length (Table 2). For cooked noodles, the soluble glutenin content demonstrated a high significant positive relationship to cutting firmness, and a significant negative correlation to cooking loss. The insoluble glutenin content was high significant positive correlated with cooked noodle thickness, hardness and cutting firmness (Table 3). The results suggested that the monomeric protein is less important than that of the glutenin for fresh noodle resistance. The soluble glutenin content is the most important property for noodle wheat, and soluble glutenin content can be used in the early generations to identity Chinese noodle wheat.

Reduced Amylose Effects on Bread and White Salted Noodle Quality

ABSTRACTAmylose content in wheat endosperm is controlled by three Wx loci, and the proportion of amylose decreases with successive accumulation of Wx null alleles at the three loci. The proportion of amylose is believed to influence end‐use quality of bread and Asian noodles. The objectives of this study were to determine influence of the allelic difference at Wx‐B1 locus on bread quality, bread firmness, and white salted noodle texture in a spring wheat cross segregating for the Wx‐B1 locus and in a set of advanced spring wheat breeding lines differing in allelic state at the Wx‐ B1 locus. In addition, we examined the relationship between amylose content and flour swelling properties on bread and noodle traits. Fifty‐four recombinant inbred lines of hard white spring wheat plus parents were grown in replicated trials in two years, and 31 cultivars and breeding lines of hard spring wheat were grown in two locations. Bread and white salted noodles were processed from these trials. The presence of the Wx‐B1 null allele reduced amylose content by 2.4% in a recombinant inbred population and 4.3% in a survey of advanced breeding lines and cultivars compared with the normal. The reduced amylose was accompanied by an average increase in flour swelling power (FSP) for the Wx‐B1 null group of 0.8 g/g for the cross progeny and 2.3 g/g for the cultivar survey group. The Wx‐B1 allelic difference did not affect flour protein in cross progeny where the allelic difference was not confounded with genetic background. Bread from the Wx‐B1 null groups on average had increased loaf volume and was softer than the normal group for the cross progeny and cultivar survey group. The Wx‐B1 allelic difference altered white salted noodle texture, most notably noodle springiness and cohesiveness where the Wx‐B1 null groups was more springy and more cohesive than the normal groups for both sets of genetic materials. Flour protein was more highly related to loaf volume than were FSP or amylose. Both flour protein and FSP were positively related to noodle textural traits, but especially noodle springiness and cohesiveness.

The Use of Potato and Sweet Potato Starches Affects White Salted Noodle Quality

ABSTRACT Potato and sweet potato starches and derivatives thereof were used to substitute part of the wheat flour in white salted noodle (WSN) manufacture. The quality of the WSN obtained was compared with the quality of WSN made from wheat flour only. When up to 20% of wheat flour was replaced by acetylated potato starch and acetylated sweet potato starches, the cooking loss of WSN decreased, while the softness, stretchability, and slipperiness increased significantly. Native and hydroxypropylated starches did not exhibit these effects. It can be concluded that the substitution of part of wheat flour with acetylated starches strongly affects noodle‐making and final noodle quality, and starch substitution can be used to change the performance of a given wheat flour for noodle making in a desired way.

Effects of Flour Particle Size and Starch Damage on Processing and Quality of White Salted Noodles

ABSTRACTSeveral reduction grinding conditions were used on a Canadian Western Red Spring (CWRS) farina to yield flours of comparable protein content within three specific particle size ranges (132–193, 110–132, 85–110 μm) at three starch damage levels (3.0, 3.9, 7.0 Megazyme units). White salted noodles (1% w/w NaCl) were initially processed at a fixed absorption (32%). Dynamic oscillatory and large deformation creep measurements indicated that doughs with lower starch damage, thick or thin, exhibited lower G′ (storage modulus), higher tan δ (G″ [loss modulus]/G′) values, and greater maximum strain during creep than doughs with higher starch damage. There were no clear trends between work input during sheeting and either starch damage or particle size. Instrumental texture analysis of raw noodles showed no significant differences due to either starch damage or flour particle size. Flours with fine particle size gave cooked noodles with the best textural attributes, whereas starch damage exhibited no consistent relationship with cooked noodle texture. Cooking loss was greatest in samples with highest starch damage and coarsest particle size; water uptake was inversely related to starch damage and particle size. Experiments were repeated at adjusted water absorptions (32–36.5%) for fine and coarse flours with highest and lowest starch damage. Differences in raw noodle dough rheological properties were largely eliminated, confirming that differences noted at constant absorption were primarily due to flour water absorption. Work input during sheeting was inversely related to starch damage and was higher for fine particle size. Cooking losses were highest for higher starch damage and fine particle size. Water uptake was highest for fine particle size, but in contrast to cooking loss, was higher at lower starch damage. Textural parameters indicated superior cooking quality when particle size was finer and starch damage was lower. Flour particle size and starch damage (as indicated by water absorption) are both primary quality determinants of white salted noodle properties and, to some extent, exert their influence independently.

Relationship Between Physicochemical Properties of Starches and White Salted Noodle Quality in Japanese Wheat Flours

ABSTRACTThis study describes the effect of starch properties of Japanese wheat flours on the quality of white salted noodles (WSN). Starch was isolated from 24 flours of 17 Japanese cultivars and amylose content was determined along with pasting properties by Rapid Visco Analyser (RVA), thermal properties by differential scanning calorimetry (DSC), and the distribution of amylopectin chain length by high‐performance anion exchange chromatography (HPAEC). Twenty flours were used to prepare WSN. As expected, 5–6% lower amylose content was associated with good WSN quality (higher scores in softness, elasticity, and smoothness). RVA analysis indicated that the pasting temperature had the greatest influence on WSN quality, while breakdown and setback showed slight effects on WSN quality. DSC results showed that lower endothermal enthalpy (ΔH) in the amylose‐lipid complex was associated with good WSN quality. Chainlength distribution of amylopectin by HPAEC was not an important factor in relation to WSN quality.

Survey of White Salted Noodle Quality Characteristics in Wheat Landraces

ABSTRACTThe introduction of novel quality characteristics from wheat (Triticum aestivum L.) landraces can enhance the genetic diversity of current wheat breeding programs. The composition of starch and protein in wheat is important when determining the end‐product quality, particularly for white salted noodles (WSN). Quality characteristics that contribute to the production of improved WSN include high starch pasting peak viscosity, low amylose content, high proportion of A‐type granules, low protein content, soft grain texture, and high protein quality as measured by SDS sedimentation volume. A survey of 133 wheat landraces from Afghanistan, China, Egypt, Ethiopia, India, Iran, Syria, and Turkey was conducted to examine the genetic variability of starch and protein quality characteristics. Two wheat cultivars, Rosella and Meering, were used as the quality controls. The variation in starch pasting peak viscosities observed among the wheat landraces had a range of 175–295 Rapid Visco Analyser units (RVU), where 52 of the landraces were not significantly different from Rosella, a commercial soft grain wheat with high pasting properties. The amylose content of the landrace population was 23.4–30.2%, where 17 landraces had significantly lower values than Rosella. The proportion of A‐type granules was 60.5–73.9%, where 112 landraces had significantly higher values than Rosella. The grain texture hardness score was 28.0–99.3, the total protein content was 8.0–15.1%, and the adjusted SDS sedimentation volume (SDS/protein) was 1.6–7.0 mL/%P. The landrace AUS4635 had high starch pasting peak viscosity, high breakdown, low amylose content, low protein content, soft grain texture, and high protein quality flour. This wheat is an ideal parent to use in a breeding program that increases the genetic variation available to develop cultivars with high‐quality WSN characteristics.

A Single Genetic Locus Associated with Starch Granule Properties and Noodle Quality in Wheat

An extensive survey of wheat cultivars showed a complete association between the presence of a granule bound starch synthase (GBSS-4A) null mutation and the classification of the respective cultivar into the white salted noodle category. Since flour swelling volume (FSV) is a standard assay of flour used to identify cultivars that have potential for the production of white salted noodles, the results of the survey were investigated further by studying the genetic association of GBSS-4A null genotypes and FSV. A study of 34, F2 derived families, from a cross between wheat cultivars Reeves (good noodle texture, high FSV) and Kulin (poor noodle texture, low FSV), provided clear evidence for the genetic association of a granule bound starch synthase (GBSS-4A) null mutation and FSV. The molecular basis for the affect of the GBSS-4A null mutation was not simply due to a decrease in amylose content in the starch granules. Instead, the null mutation most likely causes a subtle change in starch structure as indicated by the association of high starch viscosity with high FSV and the GBSS-4A null genotype. The study suggests that assaying for the GBSS-4A null mutation at the DNA level may provide a valuable screen for noodle quality at early stages in a breeding program aimed at good white salted noodle quality.

Instrumental Assessments of Japanese White Salted Noodle Quality

Instrumental Assessments of Japanese White Salted Noodle Quality

Instrumental Assessments of Japanese White Salted Noodle Quality

Strong correlations were found between some sensory evaluation results and instrumentally (Instron, Model 4301) assessed quality parameters for Japanese white salted noodles made from 32 Australian wheats. The sensory texture parameter, softness, had a strong negative correlation (r= -0.74, P <0.001) with the instrumental texture parameter, cutting force peak area divided by time. Other sensory texture parameters, smoothness and elasticity, showed significant correlations with another instrumental parameter, compression force peak area divided by time (r= -0.58, P<0.001 and r = 0.52, P < 0.01 respectively). Brightness, yellowness and discolouration of both raw and cooked noodles were measured using a colorimeter (Minolta, Model CR310). Strong correlations were observed between yellowness and discolouration of raw noodles and CIELAB b * (r= -0.79, P<0.001) and L * a * (r = -0.63, P < 0.001) values, respectively. Similar relationships were found for cooked noodles (r = - 0.74, P < 0.001 for yellowness and r = - 0.53, P < 0.01 for discolouration). Both flour pasting properties including the flour swelling test and mixograph dough properties showed strong correlations with instrumental measures of noodle texture. Protein and ash content significantly affected noodle colour. In an attempt to simplify objective noodle quality measurements instrumental texture tests were carried out on flour gels. Textural measurements of flour gels showed that sensory softness of cooked noodles was correlated with an instrumental parameter, cutting peak force divided by time (r= -0.46, P < 0.01). However, in this study no strong correlations were found between the smoothness and elasticity of noodles and any parameters of compression force-time profiles derived from gels. Yellowness of flour gels measured by a colorimeter showed a significant correlation with that of cooked noodles (r = -0.68, P < 0.001).

Instrumental Assessments of Japanese White Salted Noodle Quality

Instrumental Assessments of Japanese White Salted Noodle Quality