Push-pull Substitution Research Articles

How do donor and acceptor substituents change the photophysical and photochemical behavior of dithienylethenes? The search for a water-soluble visible-light photoswitch.

Dithienylethenes are a type of diarylethene and they constitute one of the most widely studied classes of photoswitch, yet there have been no systematic studies of how electron-donor or -acceptor substituents affect their properties. Here we report eight dithienylethenes bearing push-push, pull-pull and push-pull substitution patterns with different lengths of conjugation in the backbone and investigate their photophysical and photochemical properties. Donor-acceptor interactions in the closed forms of push-pull dithienylethenes shift their absorption spectra into the near-infrared region (λmax ≈ 800 nm). The push-pull systems also exhibit low quantum yields for photochemical electrocyclization, and computational studies indicate that this can be attributed to stabilization of the parallel, rather than anti-parallel, conformations. The pull-pull systems have the highest quantum yields for switching in both directions, ring-closure and ring-opening. The chloride salt of a pull-pull DTE, with alkynes on both arms, is the first water-soluble dithienylethene that can achieve >95% photostationary state distribution in both directions with visible light. It has excellent fatigue resistance: in aqueous solution on irradiation at 365 nm, the photochemical quantum yields for switching and decomposition are 0.15 and 2.6 × 10-5 respectively, i.e. decomposition is more than 5000 times slower than photoswitching. These properties make it a promising candidate for biological applications such as super-resolution microscopy and photopharmacology.

Electron Push-Pull Effects in 3,9-Bis(p-(R)-diphenylamino)perylene and Constraint on Emission Color Tuning.

A series of perylene-based donor-acceptor-donor (D-A-D) compounds, 3,9-bis(p-(R)-diphenylamino)perylene (R: CN (2a), F (2b), H (2c), Me (2d), and OMe (2e)), was synthesized using 3,9-dibromoperylene with p-(R)-diphenylamine, and the intramolecular charge transfer (ICT) on the D-A-D system with regard to the electron push-pull substituent effect was investigated. By introducing various p-(R)-diphenylamine derivatives with electron-donating or electron-withdrawing R groups, the energy band gaps of the D-A-D compounds were systematically controlled and the emission colors were efficiently tuned from green to red. As expected, the steady state emission spectra of all D-A-D compounds were observed, as well as the emission color controlled, depending on the Hammett substituent constants (σp). In the Lippert-Mataga plots, a different charge-transfer character was observed depending on the electron push-pull substitution, which showed gradually increased ICT characters from the electron-withdrawing to donating substitution. However, exceptionally, the strong electron-withdrawing group of CN-substituted 2a did not correlate with the other R group compounds. From the experimental data and density functional theory calculations, we assume that there is a constraint on emission color tuning to generate higher energy of blue emission in the D-A-D molecular system, due to the reverse charge-transfer property caused by the strong electron-withdrawing group.

Stabilizing a different cyclooctatetraene stereoisomer

An unconventional cis-cis-cis-trans or (Z,Z,Z,E) structure B of cyclooctatetraene (COT) is calculated to lie only 23 kcal/mol above the well-known tub-shaped (Z,Z,Z,Z) isomer A; one example of this type of structure is known. The barrier for B returning to A is small, 3 kcal/mol. However, by suitable choice of substituents, the (Z,Z,Z,E) isomer can be made to lie in energy below the tub-shaped structure. Steric, clamping, and electronic strategies are proposed for achieving this. In the steric strategy, the C8H4(CH3)2(C( t Bu)3)2 structure B is predicted to lie 21 kcal/mol below structure A, which is separated from form B only by a small barrier. A simple clamping strategy, effective for COT planarization, does not influence the A/B isomerization much. But, if the clamping group is aromatic (a fused benzene, pyrrole, thiophene, furan), the subtle interplay of potential aromaticity with clamping can be used to confer persistence if not stability on the (Z,Z,Z,E) isomer. An electronic strategy of a different kind, push-pull substitution on the COT ring, was not very effective in stabilizing the B form. However, it led us to vicinal amine-borane-substituted normal COTs that proved to be quite good at activating H2 in a frustrated Lewis pair scenario.

Fluorescence Enhancement of Unconstrained GFP Chromophore Analogues Based on the Push-Pull Substituent Effect.

Unlike the high fluorescence quantum yield of the naturally occurring green fluorescence protein (GFP, Φf ∼ 0.8), the GFP chromophore, a benzylidenedimethylimidazolinone (BDI) dye, is nearly nonfluorescent (Φf < 0.001) in common solutions at room temperature. While many efforts have been devoted into the BDI chromophore engineering for fluorescence recovery, limited success has been achieved for structurally unconstrained GFP chromophore analogues (uGFPc). Herein we report a rational design of uGFPc toward an unprecedentedly high fluorescence quantum efficiency of 0.60 in hexane. This is achieved by a combined ortho-CN and meta-dimethylamino substituent electronic effect that largely suppresses the Z → E photoisomerization (the τ torsion) reaction, which is the major nonradiative decay channel of uGFPc. The structural design relied on the assumptions that the τ torsion of the meta-amino-substituted BDI systems leads to a zwitterionic twisted intermediate state (1p*) and that destabilizing the 1p* state by an electron-withdrawing CN substituent at the ortho or para position could slow down the τ torsion. The observed CN position effect conforms to the design concept. The push-pull substitution of BDI also leads to sensitive fluorescence-quenching responses to electron donors such as trimethylamine and to H-bond donors such as methanol.

Local Electron Correlation Treatment in Extended Multireference Calculations: Effect of Acceptor-Donor Substituents on the Biradical Character of the Polycyclic Aromatic Hydrocarbon Heptazethrene.

The implementation of a local correlation (LC) treatment of multireference (MR) configuration interaction approaches within the COLUMBUS program system is reported. The LC treatment is based on the weak pairs approximation of Sæbø and Pulay (Ann. Rev. Phys. Chem. 1993, 44, 213) and a geometrical analysis of Walter et al. (Chem. Phys. Lett. 2001, 346, 177). The removal of simultaneous single excitations out of the weak pairs is based on the reference doubly occupied space only, leading to a straightforward program implementation and a conceptual simplicity in terms of well-defined localized orbitals. Reductions of up to an order of magnitude in the configuration space expansion and in computer time for the Davidson diagonalization step are found. The selection of the active and the virtual orbital spaces is not affected by this procedure. This treatment is successfully applied to the singlet biradical heptazethrene and its different acceptor-donor substituents: 4,12-dicyanoheptazethrene, 4,12-diaminoheptazethrene, and 4-amino-12-cyanoheptazethrene. Simultaneous insertion of pairs of donor and acceptor groups increases the biradical character; for push-pull substitution, this effect is significantly smaller. In addition, results obtained from spin-corrected unrestricted density functional theory calculations are supported by our MR calculations.

A heteroleptic push-pull substituted iron(II) bis(tridentate) complex with low-energy charge-transfer states.

A heteroleptic iron(II) complex [Fe(dcpp)(ddpd)](2+) with a strongly electron-withdrawing ligand (dcpp, 2,6-bis(2-carboxypyridyl)pyridine) and a strongly electron-donating tridentate tripyridine ligand (ddpd, N,N'-dimethyl-N,N'-dipyridine-2-yl-pyridine-2,6-diamine) is reported. Both ligands form six-membered chelate rings with the iron center, inducing a strong ligand field. This results in a high-energy, high-spin state ((5) T2 , (t2g )(4) (eg *)(2) ) and a low-spin ground state ((1) A1 , (t2g )(6) (eg *)(0) ). The intermediate triplet spin state ((3) T1 , (t2g )(5) (eg *)(1) ) is suggested to be between these states on the basis of the rapid dynamics after photoexcitation. The low-energy π(*) orbitals of dcpp allow low-energy MLCT absorption plus additional low-energy LL'CT absorptions from ddpd to dcpp. The directional charge-transfer character is probed by electrochemical and optical analyses, Mößbauer spectroscopy, and EPR spectroscopy of the adjacent redox states [Fe(dcpp)(ddpd)](3+) and [Fe(dcpp)(ddpd)](+) , augmented by density functional calculations. The combined effect of push-pull substitution and the strong ligand field paves the way for long-lived charge-transfer states in iron(II) complexes.

Synthesis of fluorescent 2,3,5,6-tetraalkynylpyridines by site-selective Sonogashira-reactions of 2,3,5,6-tetrachloropyridines.

4-Substituted 2,3,5,6-tetraalkynylpyridines were prepared by tetra-fold Sonogashira reactions of the corresponding 2,3,5,6-tetrachloropyridines. 2,6-Dialkynyl-3,5-dichloropyridines were prepared by site-selective Sonogashira reactions from various 4-unsubstituted and 4-substituted tetrachloropyridines. Subsequent two-fold Sonogashira reactions of the products allowed for the synthesis of various 2,3,5,6-tetraalkynylpyridines containing different alkynyl groups. The products exhibit interesting UV/Vis and fluorescence properties. The position of absorption and emission bands can be tuned by systematic variation of the type of alkynyl substituent and by the type of substituent located at position 4 of the pyridine moiety. The presence of electron withdrawing substituents or of an alkynyl group at position 4 as well as the presence of donor substituted alkynyl groups at positions 2, 3, 5 and 6 resulted in high fluorescence quantum yields of up to 0.6, presumably due to the push-pull substitution pattern of the molecules.

Highly Asymmetrical Porphyrins with Enhanced Push–Pull Character for Dye‐Sensitized Solar Cells

A porphyrin π-system has been modulated by enhancing the push-pull character with highly asymmetrical substitution for dye-sensitized solar cells for the first time. Namely, both two diarylamino moieties as a strong electron-donating group and one carboxyphenylethynyl moiety as a strong electron-withdrawing, anchoring group were introduced into the meso-positions of the porphyrin core in a lower symmetrical manner. As a result of the improved light-harvesting property as well as high electron distribution in the anchoring group of LUMO, a push-pull-enhanced, porphyrin-sensitized solar cell exhibited more than 10% power conversion efficiency, which exceeded that of a representative highly efficient porphyrin (i.e., YD2)-sensitized solar cell under optimized conditions. The rational molecular design concept based on highly asymmetric, push-pull substitution will open the possibilities of further improving cell performance in organic solar cells.

Excited State Tuning of Bis(tridentate) Ruthenium(II) Polypyridine Chromophores by Push–Pull Effects and Bite Angle Optimization: A Comprehensive Experimental and Theoretical Study

The synergy of push-pull substitution and enlarged ligand bite angles has been used in functionalized heteroleptic bis(tridentate) polypyridine complexes of ruthenium(II) to shift the (1) MLCT absorption and the (3) MLCT emission to lower energy, enhance the emission quantum yield, and to prolong the (3) MLCT excited-state lifetime. In these complexes, that is, [Ru(ddpd)(EtOOC-tpy)][PF6 ]2 , [Ru(ddpd-NH2 )(EtOOC-tpy)][PF6 ]2 , [Ru(ddpd){(MeOOC)3 -tpy}][PF6 ]2 , and [Ru(ddpd-NH2 ){(EtOOC)3 -tpy}][PF6 ]2 the combination of the electron-accepting 2,2';6',2''-terpyridine (tpy) ligand equipped with one or three COOR substituents with the electron-donating N,N'-dimethyl-N,N'-dipyridin-2-ylpyridine-2,6-diamine (ddpd) ligand decorated with none or one NH2 group enforces spatially separated and orthogonal frontier orbitals with a small HOMO-LUMO gap resulting in low-energy (1) MLCT and (3) MLCT states. The extended bite angle of the ddpd ligand increases the ligand field splitting and pushes the deactivating (3) MC state to higher energy. The properties of the new isomerically pure mixed ligand complexes have been studied by using electrochemistry, UV/Vis absorption spectroscopy, static and time-resolved luminescence spectroscopy, and transient absorption spectroscopy. The experimental data were rationalized by using density functional calculations on differently charged species (charge n=0-4) and on triplet excited states ((3) MLCT and (3) MC) as well as by time-dependent density functional calculations (excited singlet states).

Conjugated Oligomers with Terminal Donor—Acceptor Substitution

AbstractFor Abstract see ChemInform Abstract in Full Text.

Conjugated Oligomers with Terminal Donor–Acceptor Substitution

Conjugated oligomers represent a prominent class of compounds from a viewpoint of their theory, synthesis, and applications in materials science. Push-pull substitution with an electron donor D at one end of the conjugation and an electron acceptor A at the other end results in them having outstanding optical and electronical properties. This Review highlights fundamental synthetic strategies for the preparation of such oligomers with n repeat units (n=1, 2, 3, 4, ..) and the rules that govern their linear and nonlinear optical properties (absorption, frequency doubling and tripling). The unification of chemical, physical, and theoretical aspects with an interdisciplinary image of this class of compounds is attempted herein.

Push-pull substitution evidently does not stabilize the oxirene system: an AM1 and ab initio study

AM1 and ab initio calculations were performed on 1-amino-2-methanoyloxirene (1-amino-2-formyloxirene), the two corresponding oxo carbenes (“ketocarbenes”) resulting from alternative CO cleavage, and the transition states linking these species. The purpose was to see if delocalization of electron density from the double bond by the push-pull effect of the substituents would stabilize the oxirene system by diminishing its antiaromaticity. This stabilization was not seen: although at the AM1 level the oxirene is a relative minimum, it is merely an inflection point at the HF/3-21G level, and at the HF/6-31G ∗ and MP2(FC)/6-31G ∗ levels the oxirene is merely a transition state.

Electron-pair distributions in the carbon-carbon double bond: effects of a push-pull substitution

By application of a recently developed method, the population of ionic and spin-alternant electron-pair distributions are calculated in ethylene, aminoethylene, nitroethylene, and 2-nitroethenamine, one of the simplest push-pull ethylenes. Occupation numbers, giving a measure of the existence of an ionic electron pair in one carbon atom and of a spin-alternant electron pair in the two carbon atoms of the ethylenic double bond, are investigated from ab initio MO wave functions. The effects of either an electron-donating or an electron-withdrawing group and the cooperative push-pull substitution are discussed