Push-off Phase Research Articles

Differences in gait analysis and clinical outcome after dynamic fixation or screw fixation in acute syndesmosis tear: a prospective randomized pilot study.

Acute syndesmosis tears can be treated by static screw or dynamic fixation. Various studies have compared these techniques regarding postoperative outcome. However, to our knowledge, no study has used 3D-instrumented gait analysis (IGA). We hypothesized that a dynamic fixation would perform non-inferior to screw fixation in terms of biomechanical and clinical outcomes. Patients were prospectively randomized to both groups. All patients received the same follow-up rehabilitation and consultations (6 and 12 weeks; 6 and 12 months) postoperatively. Standardized questionnaires were used to objectify pain and ankle function. At 6 months follow-up, IGA was conducted additionally to objectify the biomechanical outcome. Twenty-five patients in the dynamic fixation (DF) group using TightRope® and twenty-five in the screw fixation group (SF) completed gait analysis. The DF group showed significantly higher mean values for maximum moment in the affected ankle joint (DF: 1.40 ± 0.21 Nm, SF: 1.23 ± 0.30 Nm; p = 0.023) and the unaffected ankle joint (DF: 1.52 ± 0.20 Nm, SF: 1.37 ± 0.27 Nm; p = 0.035). The difference between the affected and unaffected ankle joint was significantly higher in the SF group for active plantarflexion (DF: 1.52 ± 0.20°, SF: 1.37 ± 0.27°; p = 0.035). Both dynamic and screw fixation groups exhibited significantly reduced plantarflexion during the push-off and early swing phase, with moments and powers in the ankle joint also significantly impaired. Our study demonstrated that dynamic fixation has better or similar biomechanical and clinical outcomes compared to screw fixation. Future research should focus on biomechanical differences during gait as well as clinical outcomes in case of earlier weight-bearing after dynamic fixation. DRKS00013562 Date of Registration: 07/12/2017.

Comparison of Muscular Activity During Running with New and Used Military Boots and Running Footwears in Healthy Individuals: A Clinical Trial Study

Background: The type of footwear worn by military personnel and others could increase the risk of overuse injuries. Objectives: This study aimed to compare muscular activity during running with new and used military boots and running footwear in healthy individuals. Methods: Thirty healthy males were given a new pair of running footwear (n = 15) and thermoplastic polyurethane military boots (n = 15). Participants in each group were asked to wear these shoes for 6 months. Electromyographic activity of the dominant limb muscles was recorded during running at a speed of 3.3 m/s before and after 6 months. Results: The results indicated significant differences in muscle activity based on the type of footwear worn during various phases of running. Specifically, muscles such as the tibialis anterior, vastus lateralis, rectus femoris, biceps femoris, and semitendinosus showed varied activity during phases such as loading, mid-stance, and push-off. Additionally, there were significant effects of time on certain muscles, including the tibialis anterior and gastrocnemius medialis during the push-off phase. Interactions between footwear type and time were observed for the semitendinosus and gluteus medius during the loading phase, and the gastrocnemius medialis during the push-off phase. Conclusions: The results of this study indicate a decrease in muscle activity for most lower limb muscles in the military boots group compared to the running footwear group during the stance phase of running. The magnitude of gastrocnemius medialis activity increased in the military boots group (but not in the running footwear group) from pre-test to post-test during the push-off phase.

Effects of Technique Asymmetry on 500 m Speed Skating Performance.

This study aimed to determine the effects of technique asymmetry on 500 m straight-track speed skating performance. We analyzed 20 elite skaters, measuring their joint angles, center of mass shift, and times and speeds during the gliding and push-off phases. The technique asymmetry index (ASI) was calculated for each parameter, and paired t-tests were used to compare bilateral asymmetry. Spearman correlation coefficients assessed the relationship between the ASI and both the average straight track speed and overall performance. Significant bilateral asymmetries in the knee, push-off, trunk, and hip angles were found in both male and female participants (p < 0.05). The male participants demonstrated a higher right push-off speed (p = 0.029) and a longer left gliding time (p = 0.048). Significant asymmetry was also observed in the lateral shift of the center of mass during each phase of the straight-track skating gait cycle (p < 0.001). No significant correlation was found between the ASIs and the overall performance (p ≥ 0.067). These findings indicate that while elite speed skaters demonstrated significant bilateral technique asymmetry in straight track skating, these asymmetries did not significantly impact their overall performance.

Bioinspired Design of 3D-Printed Cellular Metamaterial Prosthetic Liners for Enhanced Comfort and Stability.

Traditional prosthetic liners are often limited in customization due to constraints in manufacturing processes and materials. Typically made from non-compressible elastomers, these liners can cause discomfort through uneven contact pressures and inadequate adaptation to the complex shape of the residual limb. This study explores the development of bioinspired cellular metamaterial prosthetic liners, designed using additive manufacturing techniques to improve comfort by reducing contact pressure and redistributing deformation at the limb-prosthesis interface. The gyroid unit cell was selected due to its favorable isotropic properties, ease of manufacturing, and ability to distribute loads efficiently. Following the initial unit cell identification analysis, the results from the uniaxial compression test on the metamaterial cellular samples were used to develop a multilinear material model, approximating the response of the metamaterial structure. Finite Element Analysis (FEA) using a previously developed generic limb-liner-socket model was employed to simulate and compare the biomechanical behavior of these novel liners against conventional silicone liners, focusing on key parameters such as peak contact pressure and liner deformation during donning, heel strike, and the push-off phase of the gait cycle. The results showed that while silicone liners provide good overall contact pressure reduction, cellular liners offer superior customization and performance optimization. The soft cellular liner significantly reduced peak contact pressure during donning compared to silicone liners but exhibited higher deformation, making it more suitable for sedentary individuals. In contrast, medium and hard cellular liners outperformed silicone liners for active individuals by reducing both contact pressure and deformation during dynamic gait phases, thereby enhancing stability. Specifically, a medium-density liner (10% infill) balanced contact pressure reduction with low deformation, offering a balance of comfort and stability. The hard cellular liner, ideal for high-impact activities, provided superior shape retention and support with lower liner deformation and comparable contact pressures to silicone liners. The results show that customizable stiffness in cellular metamaterial liners enables personalized design to address individual needs, whether focusing on comfort, stability, or both. These findings suggest that 3D-printed metamaterial liners could be a promising alternative to traditional prosthetic materials, warranting further research and clinical validation.

The effect of screw insertion configuration of Sinus Tarsi plate on biomechanical performance using finite element analysis

Sinus Tarsi plates are used as implants for minimally invasive surgery of calcaneus bone fractures. This study evaluated the screw fixation patterns of Sinus Tarsi plates for optimal biomechanical performance. Six three-dimensional (3D) finite element models with different positional screws were evaluated for calcaneus fracture stabilization using Sinus Tarsi plates with 5, 6, and 7 holes. Walking stance conditions as heel strike, midstance, and push-off phases were used to compare loading. Results indicated that the equivalent (EQV) stress exhibited in the implant was higher than in the surrounding bone, with the highest value during the push-off phase. The maximum EQV stress or risk of failure decreased when an insertion screw was placed in the anterior bone using a 7-hole plate, and the most stable strain result at the fracture bone site was recorded for a Sinus Tarsi plate with 7 holes (TT 7-1). The screw insertion pattern and configuration of the Sinus Tarsi plate impacted the biomechanical performance of the calcaneal fracture.

Could the anterior cruciate ligament reconstruction and pronated feet affect the plantar pressure variables and muscular activity during running? A comparative study

The unilateral anterior cruciate ligament reconstruction can create asymmetry in vertical ground reaction force and muscle activities, which could be amplified by pronated feet. The study compared plantar pressure variables, amplitude, and muscular frequency in individuals with pronated feet and anterior cruciate ligament reconstruction (PF/ACLR) versus control during running. As part of a cross-sectional study, 15 individuals with PF/ACLR (aged 23.2 ± 4.5 years) and 15 healthy control participants (aged 22.9 ± 4.1 years) ran barefoot at a speed of 3.3 m/s±5% on an 18-m runway. During running, a foot scan and electromyography systems were used to record the peak plantar pressure variables and electromyography activity of the main lower limb muscles, respectively. Results demonstrated lower peak plantar pressure values at the Toe 1 region (p < 0.001, d = 1.83) for the PF/ACLR group. The PF/ACLR group had larger peak plantar pressure values at toes second to fifth (p = 0.013, d = 1.15), fourth (p = 0.026, d = 0.97), fifth (p < 0.001, d = 1.74) metatarsal, and medial (p = 0.002, d = 1.41), and lateral (p = 0.001, d = 1.51) heel regions. The PF/ACLR group presented larger tibialis anterior (p = 0.003, d = 1.15), vastus lateralis (p = 0.001, d = 1.27), and gluteus medius (p = 0.009, d = 0.60) amplitude at the loading phase. At the mid-stance phase, larger tibialis anterior (p = 0.039, d = 0.99) and vastus lateralis (p = 0.00.024, d = 1.52) amplitudes were observed. For the push-off phase, the PF/ACLR group presented larger vastus medialis (p = 0.037, d = 0.82), biceps femoris (p = 0.004, d = 1.14), and semitendinosus (p = 0.001, d = 0.96) amplitudes. Our results demonstrated that pronated feet and anterior cruciate ligament reconstruction significantly impact plantar pressure variables and muscular amplitude in the lower limb during running.

Wearable biofeedback device to assess gait features and improve gait pattern in people with parkinson’s disease: a case series

IntroductionPeople with Parkinson’s Disease (PD) show abnormal gait patterns compromising their independence and quality of life. Among all gait alterations due to PD, reduced step length, increased cadence, and decreased ground-reaction force during the loading response and push-off phases are the most common. Wearable biofeedback technologies offer the possibility to provide correlated single or multi-modal stimuli associated with specific gait events or gait performance, hence promoting subjects’ awareness of their gait disturbances. Moreover, the portability and applicability in clinical and home settings for gait rehabilitation increase the efficiency in the management of PD. The Wearable Vibrotactile Bidirectional Interface (BI) is a biofeedback device designed to extract gait features in real-time and deliver a customized vibrotactile stimulus at the waist of PD subjects synchronously with specific gait phases. The aims of this study were to measure the effect of the BI on gait parameters usually compromised by the typical bradykinetic gait and to assess its usability and safety in clinical practice.MethodsIn this case series, seven subjects (age: 70.4 ± 8.1 years; H&Y: 2.7 ± 0.3) used the BI and performed a test on a 10-meter walkway (10mWT) and a two-minute walk test (2MWT) as pre-training (Pre-trn) and post-training (Post-trn) assessments. Gait tests were executed in random order with (Bf) and without (No-Bf) the activation of the biofeedback stimulus. All subjects performed three training sessions of 40 min to familiarize themselves with the BI during walking activities. A descriptive analysis of gait parameters (i.e., gait speed, step length, cadence, walking distance, double-support phase) was carried out. The 2-sided Wilcoxon sign-test was used to assess differences between Bf and No-Bf assessments (p < 0.05).ResultsAfter training subjects improved gait speed (Pre-trn_No-Bf: 0.72(0.59,0.72) m/sec; Post-trn_Bf: 0.95(0.69,0.98) m/sec; p = 0.043) and step length (Pre-trn_No-Bf: 0.87(0.81,0.96) meters; Post-trn_Bf: 1.05(0.96,1.14) meters; p = 0.023) using the biofeedback during the 10mWT. Similarly, subjects’ walking distance improved (Pre-trn_No-Bf: 97.5 (80.3,110.8) meters; Post-trn_Bf: 118.5(99.3,129.3) meters; p = 0.028) and the duration of the double-support phase decreased (Pre-trn_No-Bf: 29.7(26.8,31.7) %; Post-trn_Bf: 27.2(24.6,28.7) %; p = 0.018) during the 2MWT. An immediate effect of the BI was detected in cadence (Pre-trn_No-Bf: 108(103.8,116.7) step/min; Pre-trn_Bf: 101.4(96.3,111.4) step/min; p = 0.028) at Pre-trn, and in walking distance at Post-trn (Post-trn_No-Bf: 112.5(97.5,124.5) meters; Post-trn_Bf: 118.5(99.3,129.3) meters; p = 0.043). SUS scores were 77.5 in five subjects and 80.3 in two subjects. In terms of safety, all subjects completed the protocol without any adverse events.ConclusionThe BI seems to be usable and safe for PD users. Temporal gait parameters have been measured during clinical walking tests providing detailed outcomes. A short period of training with the BI suggests improvements in the gait patterns of people with PD. This research serves as preliminary support for future integration of the BI as an instrument for clinical assessment and rehabilitation in people with PD, both in hospital and remote environments.Trial registrationThe study protocol was registered (DGDMF.VI/P/I.5.i.m.2/2019/1297) and approved by the General Directorate of Medical Devices and Pharmaceutical Service of the Italian Ministry of Health and by the ethics committee of the Lombardy region (Milan, Italy).

Biomechanical variations in patients with flatfoot deformity: Impact of gender, age, and BMI on foot kinetics and kinematics

BackgroundFlatfoot is considered by the collapse of the foot arch, altered biomechanics and impacting functional abilities. The biomechanical gait alteration of foot kinematics and kinetics in individuals with flatfoot, based on gender, age and Body mass index (BMI) in each cohort is unclear. This study explores how gender, age, and body mass index (BMI) impact distinct foot biomechanical characteristics, including ankle joint angle (Jc°), Ground force reaction angle (GFR°), Achilles tendon force (T), Ankle joint force (Jc) and vertical ground reaction force (VGRF) during the gait stance phase, in flatfoot versus normal-foot individuals on Indian Population. MethodA foot pressure test and sagittal plane motion analysis were performed on 142 individuals with normal-foot arches and 102 with flatfoot, stratified by gender, age, and BMI. Calculations of the magnitude and direction of forces in ankle joint equilibrants relied on inverse dynamic analysis, vertical ground force reaction and mapping motion data of the gait stance phases. ResultIn the midstance phase, females with high BMI (HBMI) in the middle and older age group (p = 0.029 and p = 0.014), and males with HBMI in the older age group (p = 0.039) demonstrate significantly higher VGRF. Females and males with HBMI in middle and older age groups, along with males with normal BMI in the older age cohort, show positive and negative ranges of GFR°, indicating gait instability. In the push-off phase, females with HBMI in a middle-aged group exhibit significantly lower TandJc (p = 0.023 and p = 0.026) respectively. ConclusionThe biomechanical issues in individuals with flatfoot, while accounting for the influence of gender, age and BMI, are crucial for tailored interventions and precise solutions to biomechanical issues, thereby enhancing foot function and reducing discomfort.

Plantar Flexor Muscle Activity and Fascicle Behavior in Gastrocnemius Medialis During Running in Highly Cushioned Shoes With Carbon-Fiber Plates.

The purposes of this study were to clarify the electromyography (EMG) of plantar flexors and to analyze the fascicle and tendon behaviors of the gastrocnemius medialis (GM) during running in the carbon-fiber plate embedded in thicker midsole racing shoes, such as the Nike ZoomX Vaporfly (VF) and traditional racing shoes (TRAD). We compared the fascicle and series elastic element behavior of the GM and EMG of the lower limb muscles during running (14km/h, 45s) in athletes wearing VF or TRAD. GM EMGs in the push-off phase were approximately 50% lower in athletes wearing VF than in TRAD. Although the series elastic element behavior and/or mean fascicle-shortening velocity during the entire stance phase were not significantly different between VF and TRAD, a significant difference was found in both the mean EMG and integral EMG of the GM during the push-off phase. EMG of the gastrocnemius lateralis (GL) during the first half of the push-off phase was significantly different between VF and TRAD. Present results suggest that VF facilitates running propulsion, resulting in a decrease in GM and GL EMGs at a given running velocity during the push-off phase, leading to a reduction in metabolic cost.

Human in vivo midtarsal and subtalar joint kinematics during walking, running and hopping.

The interaction among joints of the midtarsal complex and subtalar joint is important for locomotor function; however, its complexity poses substantial challenges in quantifying the joints' motions. We determine the mobility of these joints across locomotion tasks and investigate the influence of individual talus morphology on their motion. Using highly accurate biplanar videoradiography, three-dimensional bone kinematics were captured during walking, running and hopping. We calculated the axis of rotation of the midtarsal complex and subtalar joint for the landing and push-off phases. A comparison was made between these rotation axes and the morphological subtalar axis. Measurement included total rotation about and the orientation of the rotation axes in the direction of the subtalar joint and its deviation via spatial angles for both phases. The rotation axes of all three bones relative to the talus closely align with the morphological subtalar axis. This suggests that the midtarsal and subtalar joints' motions might be described by one commonly oriented axis. Despite having such an axis, the location of the axes and ranges of motion differed among the bones. Our results provide a novel perspective of healthy foot function across different sagittal plane-dominant locomotion tasks underscoring the importance of quantifying midtarsal complex and subtalar motion while accounting for an individual's talus morphology.

Société de Biomécanique young investigator award 2022: Effects of applying functional electrical stimulation to ankle plantarflexor muscles on forward propulsion during walking in young healthy adults

The triceps surae muscle, composed of the gastrocnemius and soleus muscles, plays a major role in forward propulsion during walking. By generating positive ankle power during the push-off phase, these muscles produce the propulsive force required for forward progression. This study aimed to test the hypothesis that applying functional electrical stimulation (FES) to these muscles (soleus, gastrocnemius or the combination of the two) during the push-off phase would increase the ankle power generation and, consequently, enhance forward propulsion during walking in able-bodied adults. Fifteen young adults walked at their self-selected speed under four conditions: no stimulation, with bilateral stimulation of the soleus, gastrocnemius, and both muscles simultaneously. Muscles were stimulated just below the discomfort threshold during push-off, i.e., from heel-off to toe-off. FES significantly increased ankle power (+22 to 28 % depending on conditions), propulsive force (+15 to 18 %) and forward progression parameters such as walking speed (+14 to 20 %). Furthermore, walking speed was significantly higher (+5%) for combined soleus and gastrocnemius stimulation compared with gastrocnemius stimulation alone, with no further effect on other gait parameters. In conclusion, our results demonstrate that applying FES to the gastrocnemius and soleus, separately or simultaneously during the push-off phase, enhanced ankle power generation and, consequently, forward propulsion during walking in able-bodied adults. Combined stimulation of the soleus and gastrocnemius provided the greatest walking speed enhancement, without affecting other propulsion parameters. These findings could be useful for designing FES-based solutions for improving gait in healthy people with propulsion impairment, such as the elderly.

Direct visualization and measurement of the plantar aponeurosis behavior in foot arch deformation via the windlass mechanism.

The plantar aponeurosis (PA) is an elastic longitudinal band that contributes to the generation of a propulsive force in the push-off phase during walking and running through the windlass mechanism. However, the dynamic behavior of the PA remains unclear owing to the lack of direct measurement of the strain it generates. Therefore, this study aimed to visualize and quantify the PA behavior during two distinct foot postures: (i) neutral posture and (ii) windlass posture with midtarsal joint plantarflexion and metatarsophalangeal joint dorsiflexion, using computed tomography scans. Six healthy adult males participated in the experiment, and three-dimensional reconstruction of the PA was conducted to calculate its path length, width, thickness, and cross-sectional area. This study successfully visualized and quantified the morphological changes in the PA induced by the windlass mechanism, providing a precise reference for biomechanical modeling. This study also highlighted the interindividual variability in the PA morphology and stretching patterns. Although the windlass posture was not identical to that observed in the push-off phase during walking, the observed PA behavior provides valuable insights into its mechanics and potential implications for foot disorders.

Impact of Obesity on Foot Kinematics: Greater Arch Compression and Metatarsophalangeal Joint Dorsiflexion despite Similar Joint Coupling Ratios

This study investigates the sagittal plane dynamics of the foot, particularly the metatarsophalangeal (MTP) joint and medial longitudinal arch (MLA) movements, in relation to obesity and foot health. The kinematics of the MTP and arch joints were measured in 17 individuals with class 2–3 obesity (BMI &gt; 35 kg/m²) and 10 normal-weight individuals (BMI ≤ 24.9 kg/m²) using marker-based tracking. Analysis was conducted during heel lifting while seated and during walking at self-selected speeds. The results indicated that obese participants exhibited 20.92% greater MTP joint dorsiflexion at the end of the push-off phase and 19.84% greater MLA compression during the stance phase compared to normal-weight controls. However, no significant differences were found in the kinematic joint coupling ratio. While these findings reveal the different biomechanical behaviors of the MTP joint and MLA in obese compared to normal-weight individuals, it is important to interpret the implications of these differences with caution. This study identifies specific biomechanical variations that could be further explored to understand their potential impact on foot health in obese populations.

Enhancing walking performance in patients with peripheral arterial disease: An intervention with ankle-foot orthosis

Lower extremity peripheral artery disease (PAD) is a cardiovascular condition manifesting from narrowed or blocked arteries supplying the legs. Gait is impaired in patients with PAD. Recent evidence suggests that walking with carbon fiber ankle foot orthoses (AFOs) can improve patient mobility and delay claudication time. This study aimed to employ advanced biomechanical gait analysis to evaluate the impact of AFO intervention on gait performance among patients with PAD. Patients with claudication had hip, knee, and ankle joint kinetics and kinematics assessed using a cross-over intervention design. Participants walked over the force platforms with and without AFOs while kinematic data was recorded with motion analysis cameras. Kinetics and kinematics were combined to quantify torques and powers during the stance period of the gait cycle. The AFOs effectively reduced the excessive ankle plantar flexion and knee extension angles, bringing the patients' joint motions closer to those observed in healthy individuals. After 3 months of the AFO intervention, the hip range of motion decreased, likely due to changes occurring within the ankle chain. With the assistance of the AFOs, the biological power generation required from the ankle and hip during the push-off phase of walking decreased. Wearing AFOs resulted in increased knee flexor torque during the loading response phase of the gait. Based on this study, AFOs may allow patients with PAD to maintain or improve gait performance. More investigation is needed to fully understand and improve the potential benefits of ankle assistive devices.

Effect of Six Months of Using Thermoplastic Polyurethane and Rubber Military Boots on Lower Limb Muscle Activities During Running

Background: The age of boots is a significant factor that can impact the risk of injury during daily activities. Conversely, military personnel rely on their footwear to meet the physical demands of their daily professional tasks. Objectives: This study aimed to evaluate how wearing thermoplastic polyurethane (TPU) and rubber military boots for six months affects lower limb muscle activity during running. Methods: Thirty healthy male participants were provided with two new pairs of rubber and TPU military boots and instructed to wear them for six months. Electromyography signals were recorded during a pre-test and after six months while the participants ran at a speed of 3.2 m/s. Statistical analysis was conducted using a two-way ANOVA with repeated measures, with a significance level of 0.05. Results: The results did not show a significant overall effect of "boots" or "time" on muscle activities during running. However, there were significant boot-by-time interactions for muscle activities during different phases of the running cycle. These interactions were observed for the tibialis anterior (P = 0.037, η2p = 0.146), gastrocnemius medialis (P = 0.023, η2p = 0.172), and gluteus medius (P = 0.038, η2p = 0.144) activities during the loading phase, tibialis anterior activity at the mid-stance phase (P = 0.003, η2p = 0.278), and gastrocnemius medialis activity during the push-off phase (P = 0.046, η2p = 0.135). Conclusions: Wearing military boots appears to affect muscle activities, particularly the tibialis anterior, in healthy males. These findings underscore the importance of careful boot selection for running activities. Understanding the reasons behind differences in muscle activity between TPU and rubber military boots can inform further research and the development of specialized footwear tailored to specific operational needs.

Transfemoral prosthetic simulators versus amputees: ground reaction forces and spatio-temporal parameters in gait.

This study aimed to compare the ground reaction forces (GRFs) and spatio-temporal parameters as well as their asymmetry ratios in gait between individuals wearing a transfemoral prosthetic simulator (TFSim) and individuals with unilateral transfemoral amputation (TFAmp) across a range of walking speeds (2.0-5.5 km h-1). The study recruited 10 non-disabled individuals using TFSim and 10 individuals with unilateral TFAmp using a transfemoral prosthesis. Data were collected using an instrumented treadmill with built-in force plates, and subsequently, the GRFs and spatio-temporal parameters, as well as their asymmetry ratios, were analysed. When comparing the TFSim and TFAmp groups, no significant differences were found among the gait parameters and asymmetry ratios of all tested metrics except the vertical GRFs. The TFSim may not realistically reproduce the vertical GRFs during the weight acceptance and push-off phases. The structural and functional variations in prosthetic limbs and components between the TFSim and TFAmp groups may be primary contributors to the difference in the vertical GRFs. These results suggest that TFSim might be able to emulate the gait of individuals with TFAmp regarding the majority of spatio-temporal and GRF parameters. However, the vertical GRFs of TFSim should be interpreted with caution.

Shoe choice may affect fencing lunge attack performance.

The purpose of this study was to investigate the differences in attack time and lower limb biomechanics when performing fencing lunge with fencing shoes (FS) and commonly used court shoes (CS). Additionally, the study aimed to evaluate whether fencing shoes with a heel cup (FSH) could reduce lower limb impact. Thirteen female collegiate fencers who had participated in national-level competitions were recruited for this study. Participants performed the lunge on a human-shaped target while wearing FS, FSH, or CS in a randomized order. Biomechanical data were collected using a 3D motion analysis system synchronized with a force plate. A signal light, and an accelerometer were attached to the target's head to initiate lunge movement and detect hit moment for calculating attack time. Attack time was significantly shorter when wearing FS (0.92 ± 0.05s) and FSH (0.93 ± 0.07s) compared to CS (0.96 ± 0.06s). The maximum angular velocity of ankle plantarflexion in rear foot push-off phase was significantly slower when wearing FS and FSH than when wearing CS. The maximum knee posterior shear force, maximum knee flexion moment, and maximum ankle medial shear force during the front foot step phase were significantly greater when wearing FS than when wearing CS. These forces were significantly reduced or nearly significantly reduced when wearing FSH, and there were no significant differences compared to wearing CS. The maximum ankle medial shear force during the push-off phase in rear foot was the greatest when wearing FS but decreased significantly when using FSH. However, this force was still greater than when wearing CS. Wearing FS resulted in a higher loading rate (LR) on the front foot. This LR was reduced when a heel cup was used but still remained higher than when wearing CS. There were no significant differences in the forward extension of body, maximum ground reaction force, or center of pressure displacement during front foot step and rear foot push-off phases among the three shoe conditions. Wearing FS can enhance lunge performance, and the use of a heel cup can effectively reduce lower limb impact.

Constant low-to-moderate mechanical asymmetries during 800-m track running.

Modifications in asymmetry in response to self-paced efforts have not been thoroughly documented, particularly regarding horizontally-derived ground reaction force variables. We determined the magnitude and range of gait asymmetries during 800 m track running. Eighteen physical education students completed an 800 m self-paced run on a 200 m indoor track. During the run, vertical and horizontal ground reaction forces were measured at a sampling frequency of 500 Hz using a 5 m-long force platform system, with data collected once per lap. The following mechanical variables were determined for two consecutive steps: contact time and duration of braking/push-off phases along with vertical/braking/push-off peak forces and impulses. The group mean asymmetry scores were evaluated using the "symmetry angle" (SA) formula, where scores of 0% and 100% correspond to perfect symmetry and perfect asymmetry, respectively. There was no influence of distance interval on SA scores for any of the nine biomechanical variables (P ≥ 0.095). The SA scores were ∼1%-2% for contact time (1.3 ± 0.5%), peak vertical forces (1.8 ± 0.9%), and vertical impulse (1.7 ± 1.0%). The SA scores were ∼3%-8% for duration of braking (3.6 ± 1.1%) and push-off (3.2 ± 1.4%) phases, peak braking (5.0 ± 2.1%) and push-off (6.9 ± 3.1%) forces as well as braking (7.6 ± 2.3%) and push-off (7.7 ± 3.3%) impulses. The running velocity progressively decreased at 300 m and 500 m compared to that at 100 m but levelled off at 700 m (P < 0.001). There were no modifications in gait asymmetries, as measured at 200-m distance intervals during 800-m track running in physical education students. The 800 m self-paced run did not impose greater mechanical constraints on one side of the body. Experimental procedures for characterizing the gait pattern during 800 m track running could be simplified by collecting leg mechanical data from only one side.

The effect of harvesting the anterior half of the peroneus longus tendon on foot morphology and gait

Background and objectivesIn anterior cruciate ligament reconstruction, the strength of the graft was found to be unsatisfactory usually the anterior half of the peroneus longus tendon was taken for supplementation, but the effect on foot and ankle function and gait in the donor area is unclear. This study aims to explore the changes in the ankle and gait after using the harvested anterior half of the peroneus longus tendon as a reconstruction graft for the anterior cruciate ligament.MethodsA total of 20 patients, 6 males and 14 females, aged 18 to 44 years, with unilateral anterior cruciate ligament injuries, underwent reconstruction using the harvested anterior half of the peroneus longus tendon as a graft between June 2021 and December 2021. The part on which the anterior half of the peroneus longus tendon was harvested was considered the experimental group, while the contralateral foot was the control group. At the 6-month follow-up, the Lysholm knee score, AOFAS ankle score, and gait-related data (foot length, arch index, arch volume, arch volume index, and gait cycle parameters: percentage of time in each gait phase, step frequency, step length, foot strike angle, and push-off angle) were assessed using a 3D foot scanner and wearable sensors for both groups.ResultsAll 20 patients completed the six-month follow-up. There were no statistically significant differences between the experimental and control groups regarding knee scores, ankle scores, foot length, arch index, arch volume, arch volume index, step frequency, and step length (P > 0.05). However, there were statistically significant differences between the experimental and control groups in terms of the gait cycle parameters, including the percentage of time in the stance, mid-stance, and push-off phases, as well as foot strike angle and push-off angle (P < 0.05).ConclusionThrough our study of the surgical experimental group we have shown that harvesting the anterior half of the peroneus longus tendon does not affect foot morphology and gait parameters; however, it does impact the gait cycle.

Residual effects of combined vibratory and plantar stimulation while seated influences plantar pressure and spatiotemporal gait measures in individuals with Parkinson's disease exhibiting freezing of gait.

Combined plantar pressure and vibratory stimulation has been shown to decrease freezing of gait (FOG) episodes and improve spatiotemporal gait parameters compared to single stimulation in Parkinson's disease (PD) patients with FOG. However, the effect of combined plantar stimulations on plantar pressure analysis has never been explored. Forty PD patients with frequent FOG were allocated to either FOG shoes embedded with a 100 Hz vibratory stimulation at the Achilles tendons and a soft thickened silicone pad at the hallux and sole, or sham shoes with a non-working vibratory motor and a flat non-pressure silicone pad (20 patients per arm) while seated for 96 s. The objective gait and plantar pressure analysis were measured immediately after the stimulation. Outcomes included the normalized percentage of changes in percent FOG (%FOG) and plantar pressure in the heel-strike and push-off phase that were compared between pre- and post-stimulations. The FOG shoes group showed significantly decreased %FOG (81.5 ± 28.9% vs. 6.8 ± 22.1%, p < 0.001), plantar pressure in the heel-strike (47.8 ± 43.7% vs. 4.3 ± 9.8%, p < 0.001), plantar pressure in the push-off (57.7 ± 59.6% vs. 6.2 ± 11.6%, p < 0.001), force time integral (FTI) (40.9 ± 32.5% vs. 6.6 ± 17.3%, p < 0.001), and decreased heel contact time (19.3 ± 12.3% vs. 22.7 ± 32.5%, p < 0.001) when compared to the sham group. There was a strong negative correlation between %FOG and peak plantar pressure (r = -0.440, p = 0.005), plantar pressure in the heel-strike (r = -0.847, p < 0.001). Our study demonstrated that the FOG shoe could decrease FOG episodes by improving the heel-strike pressure, toe push-off and normalized heel-to-toe plantar pressure, suggesting that modification inputs from the peripheral sensory systems might significant improvement in FOG in PD.