Pure Phosphatidylcholine Research Articles

Liposome-based measurement of light-driven chloride transport kinetics of halorhodopsin

We report a simple and direct fluorimetric vesicle-based method for measuring the transport rate of the light-driven ions pumps as specifically applied to the chloride pump, halorhodopsin, from Natronomonas pharaonis (pHR). Previous measurements were cell-based and methods to determine average single channel permeability challenging. We used a water-in-oil emulsion method for directional pHR reconstitution into two different types of vesicles: lipid vesicles and asymmetric lipid-block copolymer vesicles. We then used stopped-flow experiments combined with fluorescence correlation spectroscopy to determine per protein Cl- transport rates. We obtained a Cl− transport rate of 442 (±17.7) Cl−/protein/s in egg phosphatidyl choline (PC) lipid vesicles and 413 (±26) Cl−/protein/s in hybrid block copolymer/lipid (BCP/PC) vesicles with polybutadine-polyethylene oxide (PB12PEO8) on the outer leaflet and PC in the inner leaflet at a photon flux of 1450 photons/protein/s. Normalizing to a per photon basis, this corresponds to 0.30 (±0.07) Cl−/photon and 0.28 (±0.04) Cl−/photon for pure PC and BCP/PC hybrid vesicles respectively, both of which are in agreement with recently reported turnover of ~500 Cl−/protein/s from flash photolysis experiments and with voltage-clamp measurements of 0.35 (±0.16) Cl−/photon in pHR-expressing oocytes as well as with a pHR quantum efficiency of ~30%.

Interaction of Lipase with Lipid Model Systems

The aim of this work was to study the interaction of lipases (as an important biopolymer) with models of biomembranes based on the phospholipid and cholesterol. Lipases (triacylglycerolacyl hydrolases) are widely distributed enzymes and well-known by their hydrolytic activity. The study of the lipase interactions with lipid vesicles in aqueous dispersions is of fundamental and practical interest. The pure phosphatidylcholine from egg yolk (ePC) and cholesterol (Chol) were obtained from Sigma-Aldrich. Lipase was obtained from hog pancreas. Measurements of the current and equilibrium surface tension (ST and eST) values were carried out using a BPA-1P device and ADSA program. The particle sizes in the prepared colloidal solutions were determined by the method of dynamic light scattering. An addition of lipase led to some decrease both, of ST and eST for the samples of ePC:Chol (in the ratios from19:1 to 1:1). The mean particle diameter (MPD) and effective particle diameter (EPD) values for the samples of ePC:Chol changed drastically by lipase addition. The EPD/MPD ratios increased from 1.7 to 2.0, from 1.8 to 2.6, from 2.3 to 6.5, from 1.5 to 2.9 for the samples of ePC:Chol at the ratios of 19:1, 14:1, 9:1, 7:1, respectively by lipase concentration increase. This general tendency can be explained by strong interaction of lipase with lipid membrane that leads to the formation of the mixed particles ePC:Chol:lipase with more narrow particle size distribution as compared to the initial EPD/MPD ratio (for the ePC:Chol mixture without lipase).

Partitioning of Catechol Derivatives in Lipid Membranes: Implications for Substrate Specificity to Catechol-O-methyltransferase.

We have utilized multiparametric surface plasmon resonance and impendance-based quartz crystal microbalance instruments to study the distribution coefficients of catechol derivatives in cell model membranes. Our findings verify that the octanol–water partitioning coefficient is a poor descriptor of the total lipid affinity for small molecules which show limited lipophilicity in the octanol–water system. Notably, 3-methoxytyramine, the methylated derivative of the neurotransmitter dopamine, showed substantial affinity to the lipids despite its nonlipophilic nature predicted by octanol–water partitioning. The average ratio of distribution coefficients between 3-methoxytyramine and dopamine was 8.0. We also found that the interactions between the catechols and the membranes modeling the cell membrane outer leaflet are very weak, suggesting a mechanism other than the membrane-mediated mechanism of action for the neurotransmitters at the postsynaptic site. The average distribution coefficient for these membranes was one-third of the average value for pure phosphatidylcholine membranes, calculated using all compounds. In the context of our previous work, we further theorize that membrane-bound enzymes can utilize membrane headgroup partitioning to find their substrates. This could explain the differences in enzyme affinity between soluble and membrane-bound isoforms of catechol-O-methyltransferase, an essential enzyme in catechol metabolism.

Amphiphilic ionic liquid induced fusion of phospholipid liposomes.

We have investigated the impact of increasing concentration of imidazolium-based ionic liquids ([CnMIM]+[Br]-) on the structural integrity of large unilamellar vesicles (LUVs) made of pure phosphatidylcholine (PC) and phosphatidylglycerol (PG) lipids. Calcein based dye leakage assays were used to monitor the permeability of LUVs in the presence of ionic liquids. As the ionic liquid concentration approaches the critical micelle value, vesicle fusion occurs resulting in unexpected quenching which is accompanied by rapid dye leakage due to the formation of transiently lived fusion-holes. Vesicle fusion is confirmed using dynamic light scattering based size measurements and fluorescence based lipid mixing assays. 1H-1H NOESY measurements using solid-state NMR spectroscopy were performed to obtain insights into the fusion mechanism. While POPC LUVs are more prone to membrane fusion, the overall extent of fusion is higher in POPG LUVs. Ionic liquid induced splaying of phospholipid chains is crucial for overcoming the hydration barrier between the merging bilayers.

Interfacial structure of 70% fish oil-in-water emulsions stabilized with combinations of sodium caseinate and phosphatidylcholine

We report on the structural evaluation of high fat fish oil-in-water emulsions emulsified with sodium caseinate (CAS) and phosphatidylcholine (PC). The microemulsions contained 70% (w/w) fish oil with 1.05–1.4% (w/w) CAS and 0.4–1.75% (w/w) PC and were studied by the combination of light scattering together with small-angle X-ray and neutron scattering (SAXS/SANS). Aqueous CAS forms aggregates having a denser core of about 100 kDa and less dense shell about 400 kDa with the hard sphere diameter of 20.4 nm. PC appears as multilayers whose coherence length spans from 40 to 100 nm. PC monolayer separates oil and water phases. Moreover, 80% CAS particles are loosely bound to the interface but are not forming continuous coverage. The distance between aggregated CAS particles in microemulsion is increased compared to CAS aggregates in pure CAS-in-water system. PC multilayers become larger in the presence of oil-water interface compared to the pure PC mixtures. Bilayers become larger with increasing PC concentration. This study forms a structural base for the combination of CAS and PC emulsifiers forming a well-defined thin and dense PC layer together with thick but less dense CAS layer, which is assumed to explain its better oxidative stability compared to single emulsifiers.

Antifungal properties of phosphatidylcholine-oleic acid liposomes encapsulating garlic against environmental fungal in wheat bread

Liposomes have gained great interest in the food and pharmaceutical industry as colloidal carriers of bioactive compounds. In this work, liposomes of phosphatidylcholine (PC) and oleic acid (OA) encapsulating garlic extract (GE) were developed to determine its aptitude as antifungal agent in wheat bread. The influence of GE on the properties of liposomes were followed by determination of size, Zeta potential, Fourier transform infrared patterns (FTIR), morphology, differential scanning calorimetry (DSC) and thermogravimetric (TGA) techniques. The produced PC-OA-GE liposomes showed spherical morphology with narrow size distribution, entrapment efficiency of 79.7% and zeta potential of −27.9 mV. In vitro antifungal test showed noticeable inhibitory activities for free and encapsulated GE against selected fungal strains. TGA analysis revealed that the presence of OA and GE in the formulation retards the liposomal thermal decomposition, as compared with the pure PC liposomes and the DSC enthalpy and main transition temperature variation in PC-OA-GE liposomes suggested a strong heat-induced rigidifying effect that could be attributed to the presence of garlic polysaccharides in the liposome surface, observed by FTIR. In the in situ test, the bread formulations with free or liposome-encapsulated GE (0.65 mL/100 g of dough) were microbiologically more stable as compared with the controls, showing mold inhibition for five days. Therefore, liposomes formulated with OA and GE showed potential as natural antifungal agent in bakery products.

Cholesterol modulates curcumin partitioning and membrane effects

Curcumin, a polyphenol molecule, presents a wide range of biological activities as antioxidant, anticancer, anti-inflammatory, antimicrobial and wound healing. Although some strengths attributed to curcumin derive from promiscuous biological activity, possibly because curcumin can interfere on many membrane located processes, knowledge of underlying interactions are lacking. Mammalian cell membranes characteristically contain 25 to 50% cholesterol/phospholipid ratio; however, most studies involving lipid bilayers and curcumin consider pure phosphatidylcholine and compare effects of curcumin on membranes with those of cholesterol. We investigated the interaction of curcumin with lipid bilayers containing cholesterol mimicking mammalian cells, and used spectroscopy techniques to determine partition coefficients, rigidity parameters and lytic activity. We found that curcumin partitions into different lipid bilayers (104 order coefficients that vary by less than a factor of two), containing cholesterol or not, and in the presence of sphingomyelin or phosphatidylserine. Curcumin decreases rigidity in all tested compositions, except that containing 40% cholesterol in which it increases the lipid packing order. In addition, curcumin induces leakage from giant unilamellar vesicles on a cholesterol concentration dependent way. Our results are compatible with the hypothesis of curcumin interaction with membranes being modulated by the liquid disordered phase and by the coexistence of liquid-ordered/liquid disordered phases. In bilayers containing cholesterol, curcumin assumes a more superficial location, drastically stiffens the 40% cholesterol bilayer and decreases the lytic effect. Our study may help researchers in the analysis of the biological effects of curcumin and curcumin-derived formulations by calling the attention to the discriminating role of the cholesterol content.

Examining the effects of cholesterol on model membranes at high temperatures: Laurdan and Patman see it differently

At high temperature, the presence of cholesterol in phospholipid membranes alters the influence of membrane dipoles, including water molecules, on naphthalene-based fluorescent probes such as Laurdan and Patman (solvatochromism). Although both of these probes report identical changes to their emission spectra as a function of temperature in pure phosphatidylcholine bilayers, they differ in their response to cholesterol. Computer simulations of the spectra based on a simple model of solvatochromism indicated that the presence of cholesterol reduces the probability of bilayer dipole relaxation and also blunts the tendency of heat to enhance that probability. While the overall effect of cholesterol on membrane dipoles was detected identically by the two probes, Laurdan was influenced much more by the additional effect on temperature sensitivity than was Patman. A comparison of the fluorescence data with simulations using a coarse-grained bilayer model (de Meyer et al., 2010) suggested that these probes may be differentially sensitive to two closely related properties distinguishable in the presence of cholesterol. Specifically, Patman fluorescence correlated best with the average phospholipid acyl chain order. On the other hand, Laurdan fluorescence tracked more closely with the area per lipid molecule which, although affected generally by chain order, is also impacted by additional membrane-condensing effects of cholesterol. We postulate that this difference between Laurdan and Patman may be attributed to the bulkier charged headgroup of Patman which may cause the probe to preferentially locate in juxtaposition to the diminutive headgroup of cholesterol as the membrane condenses.

Anionic Lipids Take Charge: Juxtamembrane Domain Interactions with Cellular Membrane

Nearly half of the human integral membrane proteome consists of single-pass transmembrane domains. Of these, receptor tyrosine kinases (RTKs), a class with twenty families of cell-surface receptors, are key regulators of vital cellular processes and targets of drug development efforts. The fibroblast growth factor receptors (FGFRs) a family of RTKs that influences cell growth, proliferation, differentiation, is also activated in a number of cancers. FGFRs dynamic architecture, that contains extracellular, single-pass transmembrane (TM), juxtamembrane (JM), and kinase domains, is tightly intertwined with cellular membrane and is a challenging target for structural studies. Recent experimental studies revealed that highly charged FGFR3 JM domains are involved in stabilization of unliganded FGFR3 dimers, which is achieved in part through interactions with charged lipids of the inner leaflet of the cellular membrane. The mechanism of JM-lipid interaction is unknown. We use all-atom molecular dynamics with highly mobile membrane mimetic (HMMM) model to capture spontaneous JM-lipid encounter complexes. To investigate the role of the anionic lipids we performed extensive simulations of multiple replicas of pure phosphatidylcholine (PC), binary mixtures of phosphatidylserine (PS) and PC, and tertiary mixtures of PC, PS, and phosphatidylinositol 4,5-bisphosphate (PIP2) lipid bilayers. Simulations revealed formation of stable anionic lipid conformations coordinated by charged JM residues. Lipid type-specific geometries lead to characteristic modes of JM-lipid interactions revealing the role of the charged lipid headgroups in establishing specific interactions. Knowledge of these dynamic structures will facilitate our understanding of mechanisms of RTK activation.

Thermal Response Analysis of Phospholipid Bilayers Using Ellipsometric Techniques.

Biomimetic planar artificial membranes have been widely studied due to their multiple applications in several research fields. Their humectation and thermal response are crucial for reaching stability; these characteristics are related to the molecular organization inside the bilayer, which is affected by the aliphatic chain length, saturations, and molecule polarity, among others. Bilayer stability becomes a fundamental factor when technological devices are developed—like biosensors—based on those systems. Thermal studies were performed for different types of phosphatidylcholine (PC) molecules: two pure PC bilayers and four binary PC mixtures. These analyses were carried out through the detection of slight changes in their optical and structural parameters via Ellipsometry and Surface Plasmon Resonance (SPR) techniques. Phospholipid bilayers were prepared by Langmuir-Blodgett technique and deposited over a hydrophilic silicon wafer. Their molecular inclination degree, mobility, and stability of the different phases were detected and analyzed through bilayer thickness changes and their optical phase-amplitude response. Results show that certain binary lipid mixtures—with differences in its aliphatic chain length—present a co-existence of two thermal responses due to non-ideal mixing.

Coating Graphene Oxide with Lipid Bilayers Greatly Decreases Its Hemolytic Properties.

Toxicity evaluation for the proper use of graphene oxide (GO) in biomedical applications involving intravenous injections is crucial, but the GO circulation time and blood interactions are largely unknown. It is thought that GO may cause physical disruption (hemolysis) of red blood cells. The aim of this work is to characterize the interaction of GO with model and cell membranes and use this knowledge to improve GO hemocompatibility. We have found that GO interacts with both neutral and negatively charged lipid membranes; binding is decreased beyond a certain concentration of negatively charged lipids and favored in high-salt buffers. After this binding occurs, some of the vesicles remain intact, while others are disrupted and spread over the GO surface. Neutral membrane vesicles tend to break down and extend over the GO, while vesicles with negatively charged membranes are mainly bound to the GO without disruption. GO also interacts with red blood cells and causes hemolysis; hemolysis is decreased when GO is previously coated with lipid membranes, particularly with pure phosphatidylcholine vesicles.

PIP-on-a-chip: A Label-free Study of Protein-phosphoinositide Interactions.

Numerous cellular proteins interact with membrane surfaces to affect essential cellular processes. These interactions can be directed towards a specific lipid component within a membrane, as in the case of phosphoinositides (PIPs), to ensure specific subcellular localization and/or activation. PIPs and cellular PIP-binding domains have been studied extensively to better understand their role in cellular physiology. We applied a pH modulation assay on supported lipid bilayers (SLBs) as a tool to study protein-PIP interactions. In these studies, pH sensitive ortho-Sulforhodamine B conjugated phosphatidylethanolamine is used to detect protein-PIP interactions. Upon binding of a protein to a PIP-containing membrane surface, the interfacial potential is modulated (i.e. change in local pH), shifting the protonation state of the probe. A case study of the successful usage of the pH modulation assay is presented by using phospholipase C delta1 Pleckstrin Homology (PLC-δ1 PH) domain and phosphatidylinositol 4,5-bisphosphate (PI(4,5)P2) interaction as an example. The apparent dissociation constant (Kd,app) for this interaction was 0.39 ± 0.05 µM, similar to Kd,app values obtained by others. As previously observed, the PLC-δ1 PH domain is PI(4,5)P2 specific, shows weaker binding towards phosphatidylinositol 4-phosphate, and no binding to pure phosphatidylcholine SLBs. The PIP-on-a-chip assay is advantageous over traditional PIP-binding assays, including but not limited to low sample volume and no ligand/receptor labeling requirements, the ability to test high- and low-affinity membrane interactions with both small and large molecules, and improved signal to noise ratio. Accordingly, the usage of the PIP-on-a-chip approach will facilitate the elucidation of mechanisms of a wide range of membrane interactions. Furthermore, this method could potentially be used in identifying therapeutics that modulate protein's capacity to interact with membranes.

PIP-on-a-chip: A Label-free Study of Protein-phosphoinositide Interactions

Numerous cellular proteins interact with membrane surfaces to affect essential cellular processes. These interactions can be directed towards a specific lipid component within a membrane, as in the case of phosphoinositides (PIPs), to ensure specific subcellular localization and/or activation. PIPs and cellular PIP-binding domains have been studied extensively to better understand their role in cellular physiology. We applied a pH modulation assay on supported lipid bilayers (SLBs) as a tool to study protein-PIP interactions. In these studies, pH sensitive ortho-Sulforhodamine B conjugated phosphatidylethanolamine is used to detect protein-PIP interactions. Upon binding of a protein to a PIP-containing membrane surface, the interfacial potential is modulated (i.e. change in local pH), shifting the protonation state of the probe. A case study of the successful usage of the pH modulation assay is presented by using phospholipase C delta1 Pleckstrin Homology (PLC-δ1 PH) domain and phosphatidylinositol 4,5-bisphosphate (PI(4,5)P2) interaction as an example. The apparent dissociation constant (Kd,app) for this interaction was 0.39 ± 0.05 µM, similar to Kd,app values obtained by others. As previously observed, the PLC-δ1 PH domain is PI(4,5)P2 specific, shows weaker binding towards phosphatidylinositol 4-phosphate, and no binding to pure phosphatidylcholine SLBs. The PIP-on-a-chip assay is advantageous over traditional PIP-binding assays, including but not limited to low sample volume and no ligand/receptor labeling requirements, the ability to test high- and low-affinity membrane interactions with both small and large molecules, and improved signal to noise ratio. Accordingly, the usage of the PIP-on-a-chip approach will facilitate the elucidation of mechanisms of a wide range of membrane interactions. Furthermore, this method could potentially be used in identifying therapeutics that modulate protein's capacity to interact with membranes.

Calcium Directly Regulates Phosphatidylinositol 4,5-Bisphosphate Headgroup Conformation and Recognition.

The orchestrated recognition of phosphoinositides and concomitant intracellular release of Ca2+ is pivotal to almost every aspect of cellular processes, including membrane homeostasis, cell division and growth, vesicle trafficking, as well as secretion. Although Ca2+ is known to directly impact phosphoinositide clustering, little is known about the molecular basis for this or its significance in cellular signaling. Here, we study the direct interaction of Ca2+ with phosphatidylinositol 4,5-bisphosphate (PI(4,5)P2), the main lipid marker of the plasma membrane. Electrokinetic potential measurements of PI(4,5)P2 containing liposomes reveal that Ca2+ as well as Mg2+ reduce the zeta potential of liposomes to nearly background levels of pure phosphatidylcholine membranes. Strikingly, lipid recognition by the default PI(4,5)P2 lipid sensor, phospholipase C delta 1 pleckstrin homology domain (PLC δ1-PH), is completely inhibited in the presence of Ca2+, while Mg2+ has no effect with 100 nm liposomes and modest effect with giant unilamellar vesicles. Consistent with biochemical data, vibrational sum frequency spectroscopy and atomistic molecular dynamics simulations reveal how Ca2+ binding to the PI(4,5)P2 headgroup and carbonyl regions leads to confined lipid headgroup tilting and conformational rearrangements. We rationalize these findings by the ability of calcium to block a highly specific interaction between PLC δ1-PH and PI(4,5)P2, encoded within the conformational properties of the lipid itself. Our studies demonstrate the possibility that switchable phosphoinositide conformational states can serve as lipid recognition and controlled cell signaling mechanisms.

The Effect of Phospholipids on Tear Film Lipid Layer Surface Activity.

We illustrate the importance of small quantities (<10 mol%) of polar phospholipids on the surface-active behavior of meibum-like lipid compositions. Artificial meibum-like lipid mixture containing cholesteryl and wax esters was mixed with differing amounts of phosphatidylcholine (PC). The surface activity of these mixtures was investigated at the air-water interface by recording surface pressure created by the lipid layer as a function of molecular area at 37°C. The PC proportion in the mixtures was 0, 2.5, 5, 7.5, or 10 mol%, and the remaining proportion in the mixture was 50:50 (mol/mol) of cholesteryl oleate (CO) and behenyl oleate (BO). Also, the effect of temperature was investigated. The surface activity of the mixtures increased in a very predictable and consistent fashion as a function of the PC proportion. The lipid mixture containing only CO and BO showed miniscule surface activity. However, already 2.5% PC mixed with the nonpolar CO and BO generated considerable increase in surface pressure. At small surface areas, the behavior of 7.5% and 10% PC compositions started to approach that of a pure PC monolayer. The temperature did not have a considerable impact on the surface-active behavior of the PC-containing compositions. The polar phospholipids have a considerable effect on the surface-active properties of artificial tear film lipid layer (TFLL) compositions. Surprisingly, this takes place already at very low and physiologically relevant PC proportions. The effect is more dependent on the actual amount of the phospholipids at the air-tear interface than on the relative amount of these lipids in TFLL.

Engineering of a novel optimized platform for sublingual delivery with novel characterization tools: in vitro evaluation and in vivo pharmacokinetics study in human

The aim of this work was to develop a novel and more efficient platform for sublingual drug delivery using mosapride citrate (MSP) as a model drug. The engineering of this delivery system had two stages, the first stage was tuning of MSP physicochemical properties by complexation with pure phosphatidylcholine or phosphatidylinositol enriched soybean lecithin to form MSP-phospholipid complex (MSP-PLCP). Changes in physicochemical properties were assessed and the optimum MSP-PLCP formula was then used for formulation into a flushing resistant platform using two mucoadhesive polymers; sodium alginates and sodium carboxymethylcellulose at different concentrations. Design of experiment approach was used to characterize and optimize the formulated flushing resistant platform. The optimized formulation was then used in a comparative pharmacokinetics study with the market formulation in human volunteers. Results showed a marked change in MSP physicochemical properties of MSP-PLCP compared to MSP. Addition of mucoadhesive polymers to flushing resistant platform at an optimum concentration balanced between desired mucoadhesive properties and a reasonable drug release rate. The optimized formulation showed significantly a superior bioavailability in humans when compared to the market sublingual product. Finally, the novel developed sublingual flushing resistant platform offers a very promising and efficient tool to extend the use of sublingual route and widen its applications.

Effect of Cholesterol on the Interaction of Cytochrome P450 Substrate Drug Chlorzoxazone with the Phosphatidylcholine Bilayer.

Many drugs are oxidized by membrane protein cytochrome P450 (CYP) enzymes during their metabolism process. CYPs are located mainly in endoplasmic reticulum (ER) membranes. Recent studies have suggested that CYP substrate drugs first bind the lipid bilayers of ER membranes and then the drugs reach the active site of CYP by way of an access channel. The entrance of the channel is located in the hydrophobic regions of the lipid bilayers. One of the features of the ER membrane is a cholesterol content that is lower than those of other biomembranes. In this study, the cholesterol concentration dependence of the interaction of a CYP substrate drug, chlorzoxazone (CZX), with model membranes composed of phosphatidylcholine (PC) and cholesterol was examined via differential scanning calorimetry (DSC), UV-visible spectroscopy, and X-ray diffraction. Experimental results indicated that CZX can bind to pure PC bilayers in the absence of cholesterol and that, by contrast, a high cholesterol concentration (30-50 mol %) tends to prevent CZX from binding to PC bilayers. Interestingly, the effect of cholesterol on the binding and insertion of CZX was biphasic. In the case of palmitoyloleoylphosphatidylcholine (POPC) bilayers containing 5-10 mol % cholesterol, the CZX's binding and penetration into the bilayer were found to be greater than those with pure POPC bilayers. The concentration of 5-10 mol % nearly corresponds to the cholesterol concentration of ER membranes. The low cholesterol contents (12-20 mol %) of ER membranes might be the most suitable for the CYP drug metabolism process in ER membranes.

Cu(2+) Binds to Phosphatidylethanolamine and Increases Oxidation in Lipid Membranes.

Herein, we demonstrate that Cu(2+) binds bivalently to phosphatidylethanolamine (PE), the second most abundant lipid in mammalian cells. The apparent equilibrium dissociation constant, K(DApp), for the Cu(2+)-PE complex at physiological pH is approximately 2 μM and is insensitive to the concentration of PE in the membrane. By contrast, at pH 10.0, where PE lipids bear a negative charge, K(DApp) decreases with increasing PE content and has a value of 150 nM for bilayers containing 70 mol % PE. The oxidation of double bonds in PE-containing bilayers can be monitored in the presence of Cu(2+). Strikingly, it was found that the oxidation rate is 8.2 times faster at pH 7.4 for bilayers containing 70 mol % PE than for pure phosphatidylcholine (PC) bilayers upon exposure of both to 70 μM Cu(2+) and 10 mM hydrogen peroxide. The rate of oxidation increases linearly with the PE content in the membrane. These results may help explain the high level of lipid oxidation in PE-containing membranes for neurodegenerative diseases and autism where the Cu(2+) concentration in the body is abnormally high.

Simultaneous extraction of phosphatidylcholine and phosphatidylethanolamine from soybean lecithin

A high composition of phosphatidylcholine (PC) and phosphatidylethanolamine (PE) was simultaneously extracted from soybean lecithin by using a mixed solvent consisting of ethanol and chloroform. The addition of chloroform in ethanol improved the total extraction yield to give high a composition of PC and PE. Thus, the best extraction yield (52%) of PC and PE was achieved at an ethanol/chloroform ratio of 6/4 (v/v). Molecular dynamics calculations of the amorphous cell bearing PC, PE, and solvent molecules were performed in order to understand the distribution of PC and PE molecules in specific solvent conditions. The extraction yield was also sensitive to extraction temperature, time and liquid to solid ratio. The extracted PC and PE mixture was successfully purified by flash chromatography using chloroform/methanol (8/2 v/v) as eluting solvent. The purified yields of PE and PC from lecithin extract were 16 and 35%, respectively. The structure of the extracted products was characterized by thin‐layer chromatography and 1H, 13C, 31P NMR, FTIR and UV/vis spectroscopies, and elemental analysis. The purity of PE and PC was higher than 95%.Practical applications: Lecithin composed of phosphoric acid, choline, fatty acids, glycerol, glycolipids, triglycerides, and phospholipids is widely used in human food, animal feed, pharmaceuticals, paints, and other industrial applications. Lecithin can easily be extracted chemically using various solvents in order to obtain pure components. Due to the importance of phospholipids there have been a number of reports on the extraction of PC from lecithin; however, there have been few reports on the extraction of PE or the simultaneous extraction of PC and PE. Thus the simultaneous extraction of PC (35%) and PE (16%) from soybean lecithin by using a mixed solvent consisting of ethanol and chloroform can be a good example to obtain such components in high yields. The protocol employed here is quite straightforward so that pure PC and PE can be obtained economically and may attract interest on mixed solvent systems for the simultaneous extraction of lecithin components.Phosphatidylcholine and phosphatidylethanolamine were simultaneously extracted from soybean lecithin by using a mixed solvent consisting of ethanol and chloroform.

Coverage and disruption of phospholipid membranes by oxide nanoparticles.

We studied the interactions of silica and titanium dioxide nanoparticles with phospholipid membranes and show how electrostatics plays an important role. For this, we systematically varied the charge density of both the membranes by changing their lipid composition and the oxide particles by changing the pH. For the silica nanoparticles, results from our recently presented fluorescence vesicle leakage assay are combined with data on particle adsorption onto supported lipid bilayers obtained by optical reflectometry. Because of the strong tendency of the TiO2 nanoparticles to aggregate, the interaction of these particles with the bilayer was studied only in the leakage assay. Self-consistent field (SCF) modeling was applied to interpret the results on a molecular level. At low charge densities of either the silica nanoparticles or the lipid bilayers, no electrostatic barrier to adsorption exists. However, the adsorption rate and adsorbed amounts drop with increasing (negative) charge densities on particles and membranes because of electric double-layer repulsion, which is confirmed by the effect of the ionic strength. SCF calculations show that charged particles change the structure of lipid bilayers by a reorientation of a fraction of the zwitterionic phosphatidylcholine (PC) headgroups. This explains the affinity of the silica particles for pure PC lipid layers, even at relatively high particle charge densities. Particle adsorption does not always lead to the disruption of the membrane integrity, as is clear from a comparison of the leakage and adsorption data for the silica particles. The attraction should be strong enough, and in line with this, we found that for positively charged TiO2 particles vesicle disruption increases with increasing negative charge density on the membranes. Our results may be extrapolated to a broader range of oxide nanoparticles and ultimately may be used for establishing more accurate nanoparticle toxicity assessments and drug-delivery systems.