Pump Level Research Articles

Vortex Motion on the Surface of Shallow and Deep Water

The attenuation of vortex motion on the surface of shallow and deep water is investigated. The vortex flow was formed by two mutually perpendicular waves excited by plungers at a frequency of 6 Hz (wavelength λ = 5.6 cm) on the surface of water measuring 70 × 70 cm and depth h. After reaching a stationary state in the vortex system, the wave pumping was switched off, and the attenuation of the surface flow was recorded. On the surface of shallow water, λ/2π ≈ h, when the characteristic size of the vortices L exceeds the depth of the liquid, L h, the time dependence of the energy of the vortex flow Е(t) is described by an exponential function at all pumping levels, and the dependence of the enstrophy Ф(t) = Ω2(t) has an exponential dependence only in the range of wave vectors 0–0.3 см–1. On the surface of deep water λ/2π h, L ≈ h dependence Е(t) and Ф(t) are far from exponential in all ranges of wave numbers. At high pumping levels, the dependencies Е(t) and Ф(t) are nonmonotonic, which can be attributed to the influence of volumetric flows.

Optimisation of open pit slope design considering groundwater effects using particle swarm optimisation and scaled boundary finite element method

Slopes are a crucial structures in open pit mines. Their design has implications on the economic, safety and environmental operation of the mining industry. Designing stable slopes can be challenging due to the complexities introduced by the stratigraphy and hydrology of the strata. With rising commodity costs and inflation rates, mining operating costs are increasing. Reducing operational costs is necessary for mining industries to remain competitive. While steepening the pit slope can decrease stripping materials and save money, it also increases the risk associated with slope surges. Therefore, optimising slopes is crucial for both financial and safety reasons. Numerical models such as the finite element method experience challenges in mesh generation of heterogeneous systems characterised by varying material properties and stratigraphies. Moreover, the need for repetitive geometry update necessitates recursive mesh regeneration that increases the computational burden. Moreover, previous slope optimisation studies focus solely on dry conditions. To consider the complex condition of hydrology along with heterogeneity in the soil stratigraphy, this study develops an optimisation procedure by combining the particle swarm optimisation algorithm and the scaled boundary finite element with an image-based meshing technique to optimise slopes with groundwater and achieve the desired factor of safety (FoS). The method changes the slope design parameters and the phreatic surface of groundwater simultaneously, considering user-defined parameters while iteratively re-meshing the optimisation processes. Several cases are presented, demonstrating the optimisation of bench width, bench angle, backfill parameters, and groundwater pumping levels.

Photoluminescence of dense arrays of InGaPAs/InGaAs quantum dots formed by substitution of group V elements

One drawback of self-organized quantum dots is their low optical gain. The development of new shaping methods that would allow higher gain, for example, due to a higher surface density of the QD array, remains an important task to date. In the present work, arrays of quantum dots have been formed by substituting phosphorous atoms with arsenic ones in a thin InGaP epilayer. Based on transmission electron microscopy data, the surface density was estimated to be about 1.3 × 1012 cm−2, which is one of the highest values for quantum dots on GaAs. The influence of an additional InGaAs epilayer (quantum well) on the luminescence properties of quantum dots was investigated in a wide temperature range and different optical pumping levels. It was found that placing the quantum well under the layer of quantum dots has little effect on the central emission wavelength, while quantum dots covered with the InGaAs demonstrate a strong red shift of the luminescence spectrum. A transition from a nonequilibrium to an equilibrium distribution of charge carriers over quantum-dot states, related to the lateral transport of charge carriers over quantum dot array, similar to that previously observed in In(Ga)As Stranski-Krastanow quantum dots, was revealed. This is manifested in a change in temperature dependencies of the linewidth and peak position of the photoluminescence band. For the structures under study, this transition occurs at a temperature of about 125 K. Rapid thermal annealing of the structures allows to increase the integrated photoluminescence intensity of quantum dots up to 4 times, while the maximum of the spectrum remains almost unchanged, provided that the annealing temperature does not exceed 620 °C.

Vacuum chambers for Swiss Light Source arcs

The vacuum chambers for diffraction limited storage ring differ from the previous storage rings generation in three main aspects: the cross-section dimension, which is divided by a factor of 2 or more to fit smaller magnet apertures; the material, which includes much more copper for heat dissipation and to limit resistive wakefields; the coating of the inner surface with a nonevaporable getter (NEG) to ensure good pumping level despite low conductance. This paper gives a detailed description of the vacuum chambers’ design used in the arc section of SLS 2.0, starting with conceptual design choices based among others on synchrotron radiation heat and wakefield considerations. The particular case of the main bending magnet vacuum chamber is explained in detail from design to manufacturing, including the development of an appropriate NEG coating procedure. Finally, the overall assembly of a 17 m long arc, its activation to reach pressure in the 10−11 mbar range followed by transport and installation into the magnets is presented. This validates the choice of activation for an arc vessel made out of copper, with wall thicknesses as small as 1 mm and with less than 0.5 mm clearance to magnet poles. Published by the American Physical Society 2024

Mechanical Circulatory Support Reduces Directly Recorded Renal Sympathetic Nerve Activity in an Ovine Model of Cardiogenic Shock

Cardiogenic shock (CS) following myocardial infarction carries a high mortality risk despite advancements in management. The use of mechanical circulatory support in CS has become an effective strategy to improve haemodynamics and prevent acute kidney injury. However, the mechanism of how kidney function improves is unclear. We hypothesised that mechanical support would inhibit renal sympathetic nerve activity (RSNA), mediating renal protection in CS. Experiments were conducted in two groups of anaesthetised female sheep. In one group, CS was induced (n=8) using injections of polystyrene microspheres into the left coronary artery under fluoroscopic guidance. After a 30-minute baseline period (post -embolisation), intravenous phenylephrine infusion at incremental doses was used to assess the baroreflex control of RSNA before pump insertion. When the pressures recovered to baseline values, the circulatory assist Impella pump was inserted into the left ventricle and run randomly at different levels (P0 min-P6 max) with two minutes at each pump level. The controls underwent the same protocol without embolisation (n=6). Coronary artery embolisation resulted in a drop in mean arterial pressure (MAP) of 21 ± 4 mmHg compared to baseline values (n=8). This was associated with a 67% increase in renal sympathetic nerve activity (RSNA) from 16 ± 5 to 21 ± 5 spikes/s (p=0.038; n=7). Circulatory support using Impella significantly increased MAP from 55 ± 4 mmHg to 68 ± 5 mmHg at pump level P6 (one-way ANOVA, p<0.001). Incremental pump support resulted in a significant decrease in RSNA (p<0.001). At pump level P6, RSNA was decreased by 25 ± 5 % compared to P0 (p<0.001). Baroreflex curves predicted a 2% reduction in RSNA at P6 equivalent pressures in CS, which was significantly less than that observed with circulatory support (p=0.006). In the control cohort with no CS, the changes in MAP and RSNA from P0 to P6 were qualitatively similar to the CS cohort. MAP increased from 84 ± 9 to 94 ± 8 mmHg (one-way ANOVA, p<0.001) and RSNA decreased by 13 ± 5 % at P6 (one-way ANOVA, p<0.001). The expected reduction in RSNA with baroreflex assessment at equivalent pressures to P6 was 5% in controls, which was not significantly different to what was observed (p=0.065). Our data indicate that the use of Impella pumps in CS reduces RSNA, which may mediate improvements in kidney function. Interestingly, the renal sympathoinhibition with the Impella pump is greater than that with vasoactive agents alone. We gratefully acknowledge the granting support from Abiomed and the University of Auckland Faculty Research Development Fund. This is the full abstract presented at the American Physiology Summit 2024 meeting and is only available in HTML format. There are no additional versions or additional content available for this abstract. Physiology was not involved in the peer review process.

Dan-shen Yin promotes bile acid metabolism and excretion to prevent atherosclerosis via activating FXR/BSEP signaling pathway

Ethnopharmacological relevanceDan-shen Yin (DSY), a traditional prescription, has been demonstrated to be effective in decreasing hyperlipidemia and preventing atherosclerosis (AS), but its mechanism remains unknown. We hypothesized that DSY activates farnesoid X receptor (FXR) to promote bile acid metabolism and excretion, thereby alleviating AS. Aim of the studyThis study was designed to explore whether DSY reduces liver lipid accumulation and prevents AS by activating FXR and increasing cholesterol metabolism and bile acid excretion. Materials and methodsThe comprehensive chemical characterization of DSY was analyzed by UHPLC-MS/MS. The AS models of ApoE−/− mice and SD rats was established by high-fat diet and high-fat diet combined with intraperitoneal injection of vitamin D3, respectively. The aortic plaque and pathological changes were used to evaluate AS. Lipid levels, H&E staining and oil red O staining were used to evaluate liver lipid accumulation. The cholesterol metabolism and bile acid excretion were evaluated by enzyme-linked immunosorbent assay, UPLC-QQQ/MS. In vitro, the lipid and FXR/bile salt export pump (BSEP) levels were evaluated by oil red O staining, real-time quantitative polymerase chain reaction (RT-qPCR) and western blotting. ResultsA total of 36 ingredients in DSY were identified by UPLC-MS/MS analysis. In vivo, high-dose DSY significantly inhibited aortic intimal thickening, improved arrangement disorder, tortuosity, and rupture of elastic fibers, decreased lipid levels, and reduced the number of fat vacuoles and lipid droplets in liver tissue in SD rats and ApoE−/− mice. Further studies found that high-dose DSY significantly reduced liver lipid and total bile acids levels, increased liver ursodeoxycholic acid (UDCA) and other non-conjugated bile acids levels, increased fecal total cholesterol (TC) levels, and augmented FXR, BSEP, cholesterol 7-alpha hydroxylase (CYP7A1), ATP binding cassette subfamily G5/G8 (ABCG5/8) expression levels, while decreasing ASBT expression levels. In vitro studies showed that DSY significantly reduced TC and TG levels, as well as lipid droplets, while also increasing the expression of ABCG5/8, FXR, and BSEP in both HepG2 and Nr1h4 knockdown HepG2 cells. ConclusionThis study demonstrated that DSY promotes bile acid metabolism and excretion to prevent AS by activating FXR. For the prevent of AS and drug discovery provided experimental basis.

Four wave mixing, average amplified spontaneous emission, and channel spacing effects on the optical transceiver systems based on multi pumped Raman amplifiers

Abstract This study has clarified the four-wave mixing, average amplified spontaneous emission, and channel spacing effects on the optical transceiver systems based on multipumped Raman amplifiers. The employed spectral width is applied in the fiber core from 1450 nm to 1650 nm through the subgroups in the fiber link. The optical loss and fiber dispersion effects are demonstrated with the spectral wavelength band with different pumping levels. The optical loss is clarified in relation to different laser pumping levels and different number of links per fiber core channel at 1550 nm. As well as the dispersion factor is demonstrated in relation to different laser pumping levels and different number of links per fiber core channel at 1300 nm. Extended fiber length, amplifier gain, and repeater spacing are clarified with different laser pumping levels and different number of links variations per fiber core channel at 1550 nm. The data rate transmission is studied against different laser pumping levels and different number of links variations per fiber core channel at both 1550 nm and 1300 nm. The optimum fiber coupled power is demonstrated against different laser pumping levels and different number of links variations per fiber core channel at 1550 nm. The fiber coupling efficiency is studied and demonstrated against different laser pumping levels and different number of links variations per fiber core channel at 1550 nm.

Narrowband-seeded PPLN non-resonant optical parametric oscillator

A PPLN non-resonant optical parametric oscillator injection-seeded by narrowband sub-100-mW CW radiation at the signal wavelength produces > 3 W idler average power at 2376 nm for a 20-kHz repetition rate, with a sub-2-nm spectral linewidth. The maximum quantum efficiency reaches 39.5%, roughly 1.4 times higher compared to narrowband operation achieved with a volume Bragg grating at the same pump level. Seed levels as low as 40 mW are sufficient to produce the desired spectral narrowing effect.

Integrated Multi‐Color Raman Microlasers with Ultra‐Low Pump Levels in Single High‐Q Lithium Niobate Microdisks

AbstractIntegrated Raman microlasers, particularly discrete multi‐color lasers which are crucial for extending the emission wavelength range of chip‐scale laser sources to much shorter wavelengths, are highly in demand for various spectroscopy, microscopy analysis, and biological detection applications. However, integrated multi‐color Raman microlasers have yet to be demonstrated because of the requirement of high‐Q microresonators possessing large χ(2) nonlinearity, strong Raman phonon branches, and the challenge in the cavity‐enhanced multi‐photon hyper‐Raman scattering parametric process. In this work, integrated multi‐color Raman lasers have been demonstrated for the first time at weak pump levels, via the excitation of high‐Q (> 6 × 106) phase‐matched modes in single thin‐film lithium niobate (TFLN) microresonators by dispersion engineering. Raman lasing is observed at 1712 nm for a 1547‐nm pump threshold power of only 620 µW, representing the state of the art in the TFLN platform. Furthermore, multi‐color Raman lasers are realized at discrete wavelengths of 1712, 813, 533, and 406 nm with pump levels as low as 1.60 mW, which is more than two orders of magnitude lower than the current records (i.e., 200 mW) in bulk resonators, allowed by the fulfillment of the requisite conditions consisting of broadband natural phase match, multiple‐resonance, and high‐Q factors.

Spatio-temporal study of single and multi-wavelength quasi-continuous-wave generation regimes in an all-normal dispersion ring cavity

In this paper, we report a comprehensive experimental study of quasi-continuous-wave operation in an all-normal-dispersion ring cavity laser with nonlinear polarization rotation based saturable absorber action. Using the temporal mapping technique, we analyze in real time spiking dynamics, characterized by the existence of ephemeral spikes that continually emerge and decay amidst the background radiation. In particular, the effects of the pumping level and its direction of variation on the laser emission dynamics were analyzed. The overall behavior, in particular the well-defined pattern of spike evolution between their emergence until their vanishing, is found to be qualitatively invariant over a broad range of pump power, from 70 mW to 550 mW, albeit the values of spiking parameters vary widely over this range. The spiking phenomenon appears from low pumping powers, just above the laser threshold. A phenomenon of hysteresis was also discovered, as some emission parameters, in particular the optical spectrum, depend on whether pump power is being raised or decreased. 2D autocorrelation analysis also proved insightful, showing that each spike appears at random, having no connection with other spikes. Finally, high pump power settings and birefringence adjustments enabled the discovery of more complex spiking dynamics where emission at various wavelengths occur, some of the lines presenting additional slow dynamics at the millisecond scale. These results indicate that deterministic complexity is, together with stochasticity, an essential ingredient to take into account for a better understanding of the operational modes in fiber lasers far from the pulsed regime.

Investigation of Optical Cavity Dynamics with Raman and Ytterbium-Doped Gain Media Integration

This study delves into a comprehensive examination of an optical cavity system that integrates Raman and Yb-doped gain media, with a focus on understanding their interactions. The research implies a characterization of each gain medium within the cavity while subjecting them to diverse co-pumping conditions with the other. When the Raman-lasing cavity is co-pumped by exciting the Yb-doped section, the resulting composite laser exhibits significant threshold reductions and there is an optimal co-pumping regime that enhances energy transfer from pump to Stokes. As for the complementary cavity, where the Yb-doped gain is influenced by the co-pumped Raman gain, at moderate pump powers a light-controlling-light behavior phenomenon arises. Within this regime, the 1064 nm signal suppresses the Yb-generated 1115 nm signal, suggesting potential applications in intracavity optical modulation. For higher pump levels, a cooperative effect emerges whereby both lasers mutually enhance each other. Minor variations in the primary 974 nm pump power, even by just a few milliwatts, result in significant capabilities for switching or modulating the Stokes signal. Under these conditions of mutual enhancement, the hybrid optical system validates notable improvements regarding energy transfer efficiency and threshold reduction. This research provides valuable insights into the intricate dynamics of optical cavity systems and reveals promising avenues for applications in advanced optical modulation technologies.

Uni-and bidirectional soliton rains in a NALM mode-locked Tm-doped fiber laser

We report the generation of different drifting patterns of soliton rains in a Tm-doped fiber laser mode locked by the technique of nonlinear amplifying loop mirror. The directional control of drifting soliton rain has been achieved by varying pump power and polarization. At a stable pumping level, a kind of bidirectional soliton rain is observed from a unidirectional one for the first time. In the bidirectional case, the forward and backward solitons, leaving from the two sides of the condensed phase, appear in the spectrum as two typical soliton peaks on a wide pedestal, 2 nm in separation. The spectral result implies that the secondary drifting solitons are formed by developing one strong sideband of the primary soliton rain, induced by a shift of the transmission peak.

Impact of iron fertilisation on atmospheric CO2 during the last glaciation

Abstract. While several processes have been identified to explain the decrease in atmospheric CO2 during glaciations, a better quantification of the contribution of each of these processes is needed. For example, enhanced aeolian iron input into the ocean during glacial times has been suggested to drive a 5 to 28 ppm atmospheric CO2 decrease. Here, we constrain this contribution by performing a set of sensitivity experiments with different aeolian iron input patterns and iron solubility factors under boundary conditions corresponding to 70 000 years before present (70 ka), a time period characterised by the first observed peak in glacial dust flux. We show that the decrease in CO2 as a function of Southern Ocean iron input follows an exponential decay relationship. This exponential decay response arises due to the saturation of the biological pump efficiency and levels out at ∼21 ppm in our simulations. We show that the changes in atmospheric CO2 are more sensitive to the solubility of iron in the ocean than the regional distribution of the iron fluxes. If surface water iron solubility is considered constant through time, we find a CO2 drawdown of ∼4 to ∼8 ppm. However, there is evidence that iron solubility was higher during glacial times. A best estimate of solubility changing from 1 % during interglacials to 3 % to 5 % under glacial conditions yields a ∼9 to 11 ppm CO2 decrease at 70 ka, while a plausible range of CO2 drawdown between 4 to 16 ppm is obtained using the wider but possible range of 1 % to 10 %. This would account for ∼12 %–50 % of the reconstructed decrease in atmospheric CO2 (∼32 ppm) between 71 and 64 ka. We further find that in our simulations the decrease in atmospheric CO2 concentration is solely driven by iron fluxes south of the Antarctic polar front, while iron fertilisation elsewhere plays a negligible role.

A switchable multi-wavelength mode-locked fiber laser based on a multi-mode interference device

A switchable multi-wavelength, passively mode-locked fiber laser in the 1 μm regime is demonstrated in this paper. The key principles of working include the nonlinear polarization rotation (NPR) mechanism for the mode-locked pulse generation and a single mode-multimode-single mode (SMS) structure as the spectral filter. The SMS structure is coiled on the paddles of a polarization controller (PC). Stable mode-locking operation is achieved at the fundamental repetition rate of 7.97 MHz. The pulse duration is 429 ps at the pump level of 216 mW, with the dual-wavelength laser emitting at 1037.86 nm and 1045.72 nm. By properly tuning the paddles of PCs, multi-wavelength mode-locked laser spectra can be observed switching from triple- to sextuple-wavelength, with the emission bandwidth of 27.6 nm from 1035.6 nm to 1063.2 nm.

Sustainable use of water from a tropical aquifer

AbstractThe objective of this work is to analyze and interpret the components or hydrogeological, physical, and chemical variables of the San Diego aquifer to describe it and explain its influence on the sustainable use of groundwater for the providing of this locality. The San Diego municipality covers most of the area of the aquifer and is an area of high urban development that currently needs the contribution of groundwater due to the deficit presented by the main supply from the Central Regional System. Said aquifer is a set of geological strata located within the limits of the San Diego River basin, in the state of Carabobo, which are capable of storing groundwater and transmitting it. Data on lithology, porosity, and pumping level were investigated, which allows calculating an estimate of the volume of water available in the aquifer. Regarding the quality of the water, the data on hardness, chlorides, sulfates, nitrates, conductivity, calcium, magnesium, and pH, show that the water towards the center and north of the aquifer is of good quality, being able to classify it as type 1A, while toward the southern end—this is of lower quality, where the mineral parameters are higher, which is related to the probable intrusion of brackish water from Lake Valencia. It is concluded by establishing that the volume of groundwater, its availability, extraction feasibility, and its quality, make it suitable for urban supply and that said extraction is sustainable. But a better‐integrated type of management must be designed, considering the contribution of the Regional System of the Center and the adequacy of the distribution networks.

Passively Q-switched Nd:GdVO4 lasers with core–shell ZIF-8@ZIF-67 saturable absorber at 1 and 1.34 µm

In the current paper, the polyhedral ZIF-8@ZIF-67 nanomaterials were successfully synthesized, and the nonlinear optical features were measured through the open-aperture (OA) Z-scan technique. By employing the ZIF-8@ZIF-67 as a saturable absorber (SA), the passively Q-switched (PQS) Nd:GdVO4 lasers were demonstrated at 1064 and 1340 nm for the first time. From the 1 µm Q-switching operation, we achieved the shortest stable pulse of 85 ns under the incident excitation of 7.15 W, while the pulse repetition rate was 975 kHz. In the PQS laser at 1340 nm, the pulse width was measured as short as 79 ns with a pump level of 9.98 W, and the pulse repetition rate was 767 kHz. These results imply that the ZIF-8@ZIF-67 SA has huge advantages in the PQS laser with stable short pulse generation under the high excitations in the near-infrared (NIR) region.

2.7 μm mid-infrared Er-doped thin-film LiNbO3-on-insulator photonic wire laser

The 2.7 μm continuous-wave laser was demonstrated theoretically on the basis of a 1480-nm-pumped Er-doped thin-film LiNbO3-on-insulator photonic wire (Er:LNOI PW) and a three-level rate equation model of Er3+. Under 1480 nm pumping, the excited state absorption (4I13/2 → 4I9/2) and cooperative upconversion process (4I13/2 → 4I15/2: 4I13/2 → 4I9/2) populate the 4I11/2 level meanwhile bypass significantly the 4I13/2 level, enabling a population inversion between these two levels. The cavity length and output coupler's reflectivity at laser wavelength were optimized for maximizing laser output. Under the optimum configuration, dependences of laser power on both pump power and Er3+ concentration were investigated. Simulation results show that lower threshold pump power, higher laser output and slope efficiency are obtained for a higher Er3+ concentration. The laser output reveals a linear relationship to the Er3+ concentration and the relationship is strong at higher pump level. Simulation results show that the threshold pump power, laser output and slope efficiency are on orders of several tens of mW, sub-mW and 3.1%, respectively, for an Er3+ concentration of 1.5 mol%. In addition, there is no need to account for photorefractive effect on the laser performance as it is far smaller than the refractive index contrast of the LNOI PW, ∼0.7. Present work opens up the possibility of implementing an on-chip 2.7 μm mid-infrared laser based on an Er:LNOI.

Persistent dynamics in coupled non-degenerate parametric oscillators: pump saturation prevents mode competition.

The coherent dynamics in networks of coupled oscillators is of great interest in wave-physics since the coupling produces various dynamical effects, such as coherent energy exchange (beats) between the oscillators. However, it is common wisdom that these coherent dynamics are transients that quickly decay in active oscillators (e.g. lasers) since pump saturation causes mode competition that results, for homogeneous gain, in the prevalence of the single winning mode. We observe that pump saturation in coupled parametric oscillators counter-intuitively encourages the multi-mode dynamics of beating and indefinitely preserves it, despite the existence of mode competition. We explore in detail the coherent dynamics of a pair of coupled parametric oscillators with a shared pump and arbitrary coupling in a radio frequency (RF) experiment, as well as in simulation. Specifically, we realize two parametric oscillators as different frequency-modes of a single RF cavity and couple them arbitrarily using a digital high-bandwidth FPGA. We observe persistent coherent beats that are maintained at any pump level, even high above the threshold. The simulation highlights how the interplay of pump depletion between the two oscillators prevents them from synchronizing, even when the oscillation is deeply saturated.

A Multi-mode Electronic Load Sensing Control Scheme with Power Limitation and Pressure Cut-off for Mobile Machinery

In mobile machinery, hydro-mechanical pumps are increasingly replaced by electronically controlled pumps to improve the automation level, but diversified control functions (e.g., power limitation and pressure cut-off) are integrated into the electronic controller only from the pump level, leading to the potential instability of the overall system. To solve this problem, a multi-mode electrohydraulic load sensing (MELS) control scheme is proposed especially considering the switching stability from the system level, which includes four working modes of flow control, load sensing, power limitation, and pressure control. Depending on the actual working requirements, the switching rules for the different modes and the switching direction (i.e., the modes can be switched bilaterally or unilaterally) are defined. The priority of different modes is also defined, from high to low: pressure control, power limitation, load sensing, and flow control. When multiple switching rules are satisfied at the same time, the system switches to the control mode with the highest priority. In addition, the switching stability between flow control and pressure control modes is analyzed, and the controller parameters that guarantee the switching stability are obtained. A comparative study is carried out based on a test rig with a 2-ton hydraulic excavator. The results show that the MELS controller can achieve the control functions of proper flow supplement, power limitation, and pressure cut-off, which has good stability performance when switching between different control modes. This research proposes the MELS control method that realizes the stability of multi-mode switching of the hydraulic system of mobile machinery under different working conditions.

Nonlinear optical properties of carboxyl-functionalized graphene oxide for dissipative soliton resonance pulse generation

Here, we investigated the nonlinear optical (NLO) characteristics of carboxyl-functionalized graphene oxide (GO-COOH) in the near-infrared (NIR) region. The results revealed that GO-COOH samples exhibit strong saturable absorption at low pump levels and a gradual transition to reverse saturable absorption (RSA) with increasing pump power. Then the saturable absorber (SA) by depositing the GO-COOH on the side-polished fiber (SPF) was employed in Yb- and Er-doped fiber lasers. Stable ultrashort pulses operating in the dissipative soliton (DS) and conventional soliton (CS) regimes were obtained with pulse widths of 26.6 ps and 968 fs, respectively. Besides, the dissipative soliton resonance (DSR) phenomenon caused by the RSA of GO-COOH was also observed with increasing pump power. The high-stable DSR mode-locked pulses with the maximum pulse energy of 1.91 nJ and 0.74 nJ were obtained in YDFL and EDFL respectively. These results not only reveal the potentiality of GO-COOH in ultrafast photonics applications but also open a new avenue to explore high-pulse-energy laser sources based on two-dimensional materials.