Pulsed Electric Field Treatment Research Articles

Effect of pulsed electric field processing on microbial and enzyme inactivation in blended plant-based milk alternatives: A case study on a microbial challenge test for a non-presterilized oat-based beverage enriched with pea protein

Microbial and enzyme inactivation by pulsed electric field (PEF) treatment was assessed in a blended plant-based milk alternative (PBMA) containing oats and pea protein without the application of presterilization. This was conducted to investigate a novel approach that permits PEF process validation for PBMA containing heat-labile components (protein and starch). Continuous PEF processing at moderate field strengths (9–10 kV/cm) combined with mild preheating (30–45 °C) for 25 s was applied over a range of specific energy inputs (77–245 kJ/L). Selective plating permitted bacterial enumeration of inoculated surrogate organism, despite the presence of natural microbial contaminants in the non-presterilized product. A minimum 5-log reduction of inoculated surrogates Escherichia coli and Listeria innocua alongside native microbiota was identified after preheating to 35–45 °C followed by PEF at 192–215 kJ/L. α-amylase activity was reduced by up to 89% during a similar PEF treatment (205 kJ/L, 40 °C). Overall, continuous PEF combined with mild preheating temperature was shown to achieve microbial inactivation in the pea protein enriched PBMA in compliance with current food safety regulations. Industrial relevancePresterilization is typically applied prior to conducting microbial challenge testing on food products to validate novel pasteurization treatments according to current regulatory requirements that a minimum 5-log reduction of relevant inoculated food pathogens must be achievable. However, for a variety of blended PBMA containing heat-labile proteins, presterilization is not advisable as the occurrence of irreversible changes in the product quality linked to protein coagulation and phase separation will affect the inactivation efficacy during subsequent microbial challenge testing. Hence, an alternative approach is presented utilizing a non-presterilized PBMA and thorough microbiological analysis, combining non-selective and selective plating techniques. This allows an identification of PEF treatment parameter with a minimum 5-log reduction of inoculated surrogate organism alongside naturally present microbial contaminants. This may serve as a valuable guideline for stakeholders in the food industry when addressing the efficacy of novel preservation treatments such as PEF in PBMA products with similar heat-induced product stability challenges.

Ultrasound and pulsed electric field treatment effect on the thermal properties, oxidative stability and fatty acid profile of oils extracted from berry seeds

AbstractThe seeds of berry fruits which are considered as a by-product may be valorized by recovering the oil they content. Nevertheless, the conventional extraction methods are time, energy and organic solvents consuming. In order to make extraction more environmental-friendly, alternative methods, like ultrasound-assisted and pulsed electric field-assisted processes, are being developed. The procedure of extraction may however influence the quality of obtained oil. The following study aims to define the effects of ultrasound and pulsed electric field application in the extraction process on the thermal properties, i.e., oxidative stability, melting and cyclic heating/cooling profiles, thermal decomposition characteristics. Additionally, fatty acid profile assessment was included in the study. Seeds of blackberries, blackcurrants, chokeberries, raspberries and redcurrants were used to extract oil. Based on the results, it can be summarized that extraction method influenced the resistance of oils to oxidation. Ultrasound-assisted process resulted in oils with the highest oxidation induction times. Melting profile was slightly influenced by extraction method, with peak temperatures indicating the presence of low-melting and middle-melting triacylglycerol fractions. Differential scanning calorimetry with heat/cool/heat procedure let determine crystallization peak temperatures around − 60 °C, which could be associated with the specific triacylglycerol profile of berry seed oils. The courses of thermogravimetric analysis curves were comparable for all the tested samples. The fatty acid profile study revealed that all the studied thermal properties were affected by the unique fatty acid percentage share, with a great predominance of polyunsaturated fatty acids. Obtained results allowed to conclude that extraction method influenced oxidative stability, thermal properties and fatty acid profile only to some extent. The most promising extraction method among analyzed seems to be ultrasound-assisted extraction as it provided oil with high oxidative stability, typical thermal properties and unchanged fatty acid profile, without being harmful to natural environment due to possible reduction in solvent and time consumption.

Effect of pulsed electric field processing on the quality characteristics and enzyme activity of tender coconut water.

Tender coconut water (TCW) is a natural drink rich in natural electrolytes, minerals, salts and sugars; it has good health benefits. But, its shelf-life is very limited because of the active nature of enzymes present in it when exposed to air. Therefore, the processing of TCW is necessary to inactivate the enzymes. So, this study aims to observe the effect of various process parameters of pulsed electric field (PEF) on the quality parameters of TCW. For the treatment of TCW with PEF, a full-factorial design of experiments was followed with process parameters such as three levels of electric field intensity (8, 12, and 16 kV/cm), two levels of pulse width (PW) (50 and 70 μs), and six levels of the number of pulses (2000 to 12,000 pulses) were considered at a constant pulse OFF time of 75 ms. PEF treatment did not significantly change pH, total soluble solids, and viscosity. However, it significantly affected vitamin C, colour, and total and reducing sugars. PEF treatment significantly enhanced the total phenolic content and antioxidant activity by 23.17% and 42.49%, respectively. At the same time, significant inactivation of polyphenol oxidase (100%) and peroxidase (60.2%) was observed at PEF treatment conditions of 16 kV/cm, 70 μs PW, and 12,000 pulses. Moreover, no significant change in the sensory acceptability of PEF-treated TCW (16 kV/cm, 70 μs PW, 12,000 pulses) when compared to the untreated/fresh TCW, which is a promising sign.

A solid-state pulse power sub-nanosecond SiC DSRD-based generator with high-voltage and high repetition frequency for pulse discharge water treatment

Water treatment is one of the most important issues for all walks of life around the world. The unique advantages of the solid-state power electronic pulses in water treatment make it attractive and promising in practical applications. The output voltage, rising time, repetition rate, and peak power of output pulses have a significant impact on the effectiveness of water treatment. Especially in pulse electric field treatment and pulse discharge treatment, the pulse with fast rising time achieves the advantage of generating plasma without corona, which can avoid water heating effect and greatly improve the efficiency of the pulse generator. High repetition rate can significantly reduce the peak power requirement of the pulse in water treatment application, making the equipment smaller and improving the power density. Therefore, the study developed a high-voltage high frequency sub-nanosecond pulse power generator (PPG) system for wastewater treatment. It adopts SiC DSRD (Drift Step Recovery Diode) solid-state switches and realize modular design, which can achieve high performance and can be flexible expanded according to the requirements of water treatment capacity. Finally, an expandable high-voltage PPG for water treatment is built. The output parameters of the PPG include output pulse voltage range from 1 to 5.28 kV, rise time <600 ps (20%–90%), repetition up to 1 MHz. The experiment results of PPG application for pulse discharge water treatment is presented. The results indicate that the proposed generator achieves high-efficiency degradation of 4-Chlorophenol (4-CP), which is one of the most common chlorophenol compounds in wastewater. From experiment, the homemade system can degrade 450 mL waste water containing 500 mg/L 4-CP in 35 min, with a degradation rate of 98%. Thereby, the requirement for electric field intensity decreased. Through the further quantitative analysis, the impact of frequency, voltage, and electrode spacing on the degradation effect of 4-CP is confirmed.

Effect of Pulsed Electric Fields on the Shelf Stability and Sensory Acceptability of Osmotically Dehydrated Spinach: A Mathematical Modeling Approach.

This study focused on the osmotic dehydration (OD) of ready-to-eat spinach leaves combined with the pulsed electric field (PEF) pre-treatment. Untreated and PEF-treated (0.6 kV/cm, 0-200 pulses) spinach leaves were osmotically dehydrated at room temperature for up to 120 min. The application of PEF (0.6 kV/20 pulses) prior to OD (60% glycerol, 25 °C, 60 min) lowered water activity (aw = 0.891) while achieving satisfactory product acceptability (total sensory hedonic scoring of 8). During the storage of the product (at 4, 8, 12, and 20 °C for up to 30 d), a significant reduction in total microbial count evolution was observed (9.7 logCFU/g for the untreated samples vs. 5.1 logCFU/g for the PEF-OD-treated samples after 13 d of storage at 4 °C). The selection of these PEF and OD treatment conditions enabled the extension of the product shelf life by up to 33 d under chilled storage. Osmotically treated spinach could find application in ready-to-eat salad products with an extended shelf life, which is currently not possible due to the high perishability of the specific plant tissue.

Untargeted metabolomic analysis of strawberries exposed to pulsed electric fields and cold plasma before postharvest storage

After being harvested, strawberries experience a decline in nutrients and anthocyanins, which is further exacerbated by their vulnerability to plant pathogen-related decay. As postharvest losses encompass up to 50 % of total production, the development of a physical method complementary to refrigeration to reduce these losses is a goal pursued globally, given a global market of US$19 B per year. In this study, two non-thermal technologies, pulsed electric fields (PEF) and cold plasma (CP), were used to evaluate their effectiveness in maintaining phytochemical integrity in exposed strawberries. A PEF treatment of 1 pulse at 1 kV/cm field strength in 3 L of tap water could significantly alter the volatile and metabolomic composition of the fruit, while simultaneously reducing its firmness during cold storage. However, subjecting the fruit to a CP treatment at 15 % (210 watts) for 1 min did not impact the quality parameters. Furthermore, unlike the PEF treatment, the strawberries retained their firmness during storage and exhibited a consistent volatile and metabolomic profile. Based on these results, CP treatment enhances firmness and maintains the compounds found in strawberries, meanwhile, while PEF treatment might not be ideal for preserving the physicochemical parameters of fruit

Combined hurdle effects of pulsed electric field and ultraviolet-C irradiation on microbial load reduction and composition of hemeproteins from Asian seabass gills

The combined effects of two non-thermal technologies, namely pulsed electric field (PEF) and ultraviolet-C (UV-C) irradiation, on microbial load reduction and composition of crude hemeprotein extract (CHPE) from Asian seabass gills were investigated. PEF at two intensities (15 kV and 17.5 kV) for different times (0, 1, 2.5, 5 and 10 min) was employed to treat CHPE solution. Subsequently freeze-dried PEF treated powders were exposed to UV-C for varying durations (0, 15 and 30 min). Microbial community in gill and selected CHPE powders was also determined using next generation sequencing (NGS). PEF treatment effectively reduced the initial microbial load (8.0 log10 CFU/g) when high PEF intensity (17.5 kV) for longer treatment time (5 min) was employed, leading to microbial load reduction to 5.5 log10 CFU/g. However, prolonged PEF treatment adversely affected CHPE properties, as witnessed by the decreased heme iron content and alterations in protein patterns. Subsequent UV-C irradiation of freeze-dried PEF-treated CHPE powder for 15 min demonstrated a synergistic effect on further reduction of microbial counts to 3.0 log10 CFU/g. NGS analysis showed the dominance of Flavobacteriaceae families in the microbial community composition in gill, untreated CHPE powder and PEF-UV-C treated CHPE powder. Nevertheless, no Vibrio parahaemolyticus and other Vibrio spp. were detected in all samples. The study revealed the potential of combined non-thermal hurdle technologies under appropriate conditions in ensuring microbiological safety and maintaining quality of CHPE. CHPE powder could therefore be used for fortification in food products as an iron supplement to alleviate iron-deficient anaemia.

Evaluation of ultrasound and pulsed electric field combinations on the cooking Losses, texture Profile, and Taste-Related amino acids of chicken breast meat

The search to improve the quality of meat while maintaining its nutritional value and flavor profile has driven the investigation of emerging clean-label non-thermal technologies in the field of meat processing. Ultrasound (US) and pulsed electric field (PEF) treatments have emerged as promising tools for producing high-quality meat products. This study investigated the combined effects of ultrasound and PEF on chicken breast meat quality, focusing on cooking loss, texture, and taste-related amino acids. Ultrasound (24.5 kHz, 300 W, 10 min) combined with PEF for 30 s (1.6, 3.3, and 5.0 kV/cm as US + PEF 1, US + PEF 3, and US + PEF 5, respectively) significantly reduced cooking losses (up to 28.78 %), potentially improving the product yield. Although US + PEF significantly (p < 0.05) affected pH, particularly at a higher PEF intensity (5 kV/cm), the overall color appearance of the treated meat remained unchanged. The combined treatments resulted in a tenderizing effect and decreased meat hardness, adhesiveness, and chewiness. Interestingly, US + PEF with increasing PEF intensity (1.6 to 5.0 kV/cm) led to a gradual increase in taste-related amino acids (aspartic acid, glutamic acid, etc.), potentially enhancing flavor. FTIR spectra revealed alterations in protein and lipid structures following treatment, suggesting potential modifications in meat quality. Scanning electron microscopy (SEM) revealed significant changes in the texture and structure of US + PEF-treated meat, depicting structural disruptions. Furthermore, Pearson’s correlation analysis and principal component analysis (PCA) revealed a clear relationship between the physicochemical characteristics, free amino acids, color, and texture attributes of chicken meat. By optimizing treatment parameters, US + PEF could offer a novel approach to improve chicken breast meat quality.

Low-intensity pulsed electric fields pre-treatment on yogurt starter culture: Effects on fermentation time and quality attributes

Low-intensity pulsed electric fields (PEF) were applied to a starter culture mix (Streptococcus thermophilus, Lactobacillus bulgaricus, and partially skimmed milk) before the fermentation stage of natural yogurt. The impact of PEF processing conditions on yogurt fermentation time and quality characteristics was evaluated. PEF parameters were set based on a factorial experimental design; independent variables: electric field strength, pulse-frequency, and pulse-width, were explored, having fermentation time as a response. Most PEF treatments reduced fermentation time by 0.31–0.52 h compared to conventional yogurt processing (CY) (4.70 ± 0.23 h). The shortest time (4.18 ± 0.04 h) resulted from PEF pre-treatment with 8-μs monopolar pulses at 1 kV/cm and 150 Hz during 400 μs. The physicochemical and sensory characteristics of PEF-treated yogurt were similar to those of the CY immediately after processing and during refrigeration storage. Low-intensity PEF could be a promising alternative pre-treatment of yogurt production, reducing fermentation time while maintaining quality attributes of natural yogurt. Industrial relevanceConventional yogurt processing lasts around 4.5–6 h, representing high energy consumption and production costs. The application of pulsed electric fields (PEF) processing to the starter culture before yogurt fermentation represents a potential alternative to diminish production time by stimulating lactic acid bacteria and accelerating fermentation stage. This study demonstrated that low-intensity PEF (1–3 kV/ cm) reduced fermentation time by 0.31–0.52 h without compromising yogurt's quality properties, including physicochemical characteristics and sensory attributes. Obtained results suggest that this technology allows more efficient and sustainable yogurt production methods, positively impacting industry and consumers.

Pulsed electric field processing of fruit juices with inactivation of enzymes with new inactivation kinetic model and determination of changes in quality parameters

Pulsed electric fields (PEF) processing of fresh grape, orange and tomato juices by 17.2–24.1 kV/cm electric field strengths, 130.0–1040.5 μs treatment times and 1.43–29.13 J/kg energies with respect to determination of the changes in the physical and bioactive properties, color parameters in addition to inactivation of pectin methyl esterase (PME), polyphenol oxidase (PPO), and lipoxygenase (LOX) enzymes were studied. In general, decrease in pH, increase in conductivity (except for grape juice), total phenolic substance content, and total antioxidant capacity with no significant change (p > 0.05) in total soluble solids were observed by PEF treatment for all juices. Except for hue value for orange juice, no significant changes (p > 0.05) were observed in color values. Inactivation of the enzymes were increased with increased energy, and calculated electrical activation energies for PME, PPO, and LOX enzymes were 8.31, 7.06, and 4.31 kJ/mol, respectively. Industrial relevanceEnzymes in addition microorganisms causing quality degradation is of great concern in fruit juice industry as most of the enzymes are resistant to processing technologies. Increased PEF treatment time provided over 95% inactivation on PME, PPO, and LOX enzymes with no adverse effect on quality properties of grape, orange, and tomato juices revealing a viable alternative to juice processing industry.

Canola Seed Protein: Pretreatment, Extraction, Structure, Physicochemical and Functional Characteristics.

The rapid growth of the global population has led to an unprecedented demand for dietary protein. Canola seeds, being a widely utilized oil resource, generate substantial meal by-products following oil extraction. Fortunately, canola meals are rich in protein. In this present review, foremost attention is directed towards summarizing the characteristics of canola seed and canola seed protein. Afterwards, points of discussion related to pretreatment include an introduction to pulsed electric field treatment (PEF), microwave treatment (MC), and ultrasound treatment (UL). Then, the extraction method is illustrated, including alkaline extraction, isoelectric precipitation, acid precipitation, micellization (salt extraction), and dry fractionation and tribo-electrostatic separation. Finally, the structural complexity, physicochemical properties, and functional capabilities of rapeseed seeds, as well as the profound impact of various applications of rapeseed proteins, are elaborated. Through a narrative review of recent research findings, this paper aims to enhance a comprehensive understanding of the potential of canola seed protein as a valuable nutritional supplement, highlighting the pivotal role played by various extraction methods. Additionally, it sheds light on the broad spectrum of applications where canola protein demonstrates its versatility and indispensability as a resource.

Insight into the effects of pulsed electric field on the structure, aggregation characteristics and functional properties of whey proteins

The effects of pulsed electric field (PEF) under different electric field intensities (EFIs, 5–20 kV/cm) and treatment times (2–8 ms) on the structural properties, aggregation/dissociation, and rheological characteristics of whey proteins (WPs) were investigated. An increase of visual turbidity and particle size measurements in 5 and 10 kV/cm PEF treatment groups indicated the formation of larger, insoluble aggregates dominated by disulfide bonds cross-linking and enhanced surface hydrophobicity. However, with the augmentation of EFI reaching a pivotal level (15 and 20 kV/cm), the decrease of hydrophobic interaction coupled with the increased electrostatic repulsion due to increased helix structure can dissociate the aggregates in response to blue-shifted particle size and thin irregular cavern-like structure, causing the solubility increased by 5.24% (20 kV/cm treatment for 8 ms). Furthermore, WPs oxidation played an important role in aggregates disintegration and liberation of peptides due to protein polarization and attack of reactive radicals produced by electrochemical reaction. Rheological analysis showed that higher solubility and diminished particle size after 15 and 20 kV/cm treatments improved the emulsifying capacity and decreased viscosity and interfacial tension of WPs dispersion. Conclusively, structural modification and preeminent functional properties were prompted by the extension of EFI and treatment time. Therefore, an effective theoretical basis may be proposed for PEF used as a promising technology to modify the functional characteristics of WPs.

Pulsed Electric Field Treatment of Oat and Barley Flour: Influence on Enzymes, Non-starch Polysaccharides, Dough Rheological Properties, and Application in Flat Bread

AbstractThis study examined the effects of pulsed electric field (PEF) treatment on enzymes, non-starch polysaccharides, and bread-making potential of oat and barley flour. Enzyme activity, microstructure, β-glucan extractability, molecular weight (Mw) and structure of non-starch polysaccharides, dough rheology, and flat bread properties were determined. An exponential decay model explained better the residual activity of oat β-glucanase across electric field intensity than barley β-glucanase. PEF treatment of flour at 12 kV/cm for 162 ms significantly reduced β-glucanase activity (40.2–76.5%) while increasing the concentration of total β-glucans (33.5%) and water-extractable arabinoxylans (36–41%). Mw of linear β-d-glucans decreased (9%) while Mw of branched arabinoxylans increased (6–33%). Scanning electron microscopy showed changes in microstructure of barley proteins. Blending wheat flour (70%) with oat or barley flour (30% weight) after PEF treatment enhanced gluten aggregation energy (29–19%) and breakdown viscosity (18–43%) of dough, as well as increased β-glucan content (21–32%) but reduced specific volume (11–24%). The findings of this study provide a comprehensive insight into the PEF’s potential for retarding enzymatic reactions and preserving integrity of cereal non-starch polysaccharides.

Effects of Pulsed Electric Field on Oil Extraction Rate and Tocopherol in Peony Seeds

Peony seed oil, known for its high nutritional value and low production yield, has become a crucial component in high-quality health products. Consequently, enhancing the extraction efficiency of peony seed oil has become an industry objective. Pulse electric field (PEF) technology, as a non-thermal extraction method, has shown promising advancements in improving plant oil yield by enhancing cell permeability. In this study, we designed a static parallel plate PEF treatment unit to process peony seed particles. By manipulating pulse voltage parameters, we investigated the effects of particle size and PEF strength on the oil yield. We also analyzed and evaluated tocopherol in the oil before and after treatment. The results demonstrated that PEF significantly increased the oil yield. Both treated and control groups exhibited gradually increased oil yields with decreasing particle size until reaching saturation at a certain particle size. Increasing voltage frequency did not have a significant impact on the oil yield; however, increasing voltage amplitude resulted in an optimal point for maximum oil yield. Analysis of oil composition indicated that PEF appropriately increased tocopherol content. These findings provide a foundation for further optimization of PEF parameters to assist in extracting peony seed oil and facilitate its industrial application.

Enhancing Nutritional Quality and Color Stability of Tomato Juice through Low-Intensity Pulsed Electric Field Treatment

Aims: This study aimed to evaluate the effect of low-intensity pulsed electric field (LIPEF) treatment on the lycopene content, ascorbic acid retention, and color enhancement of juice prepared by using Roma variety tomatoes.&#x0D; Methodology: The tomato slices were kept in the PEF treatment chamber with varying electric field strength ranging from 2-8 kV/cm and pulse numbers between 10-70 with a monopolar pulse of 1 Hz frequency having a pulse on/off time respectively of 10 µs. After the PEF treatment, the slices were processed to extract the juice for further analysis.&#x0D; Results: The study revealed significant findings regarding the effect of LIPEF treatment on Roma variety tomatoes. Treatment with 4 kV/cm and 50 pulses resulted in a remarkable 69.11% increase in lycopene content compared to untreated tomato juice. Additionally, there was a remarkable retention rate of 99.84% for ascorbic acid in the treated samples compared to the control. Furthermore, LIPEF treatment led to a substantial increase of 40.78% in the a* value, indicating enhanced red coloration of the extracted juice compared to the control. However, higher electric field strength affects the retention of ascorbic acid content. &#x0D; Conclusion: The findings of this study demonstrate the effectiveness of low-intensity pulsed electric field (LIPEF) treatment in enhancing the lycopene content, retaining ascorbic acid, and improving the red coloration of Roma variety tomatoes. LIPEF treatment has the potential to be utilized in food processing industries to improve the quality and nutritional value of tomato-based products.

Effects of high voltage pulsed electric field on structural properties and immune reactivity of arginine kinase in Fenneropenaeus chinensis

To evaluate the effect of high voltage pulsed electric field (PEF) treatment (10–20 kV/cm, 5–15 min) on the structural characteristics and sensitization of crude extracts of arginine kinase from Fenneropenaeus chinensis. By simulated in vitro gastric juice digestion (SGF), intestinal juice digestion (SIF) and enzyme-linked immunosorbent assay (ELISA), AK sensitization was reduced by 42.5% when treated for 10 min at an electric field intensity of 15 kV/cm. After PEF treatment, the α-helix content decreased, and the α-helix content gradually changed to β-sheet and β-turn. Compared to the untreated group, the surface hydrophobicity increased and the sulfhydryl content decreased. SEM and AFM analyses showed that the treated sample surface formed a dense porous structure and increased roughness. The protein content, dielectric properties, and amino acid content of sample also changed significantly with the changes in the treatment conditions. Non-thermal PEF has potential applications in the development of hypoallergenic foods.

Pulsed electric field treatment improves the oil yield, quality, and antioxidant activity of virgin olive oil

Pulsed electric field (PEF) is an innovative technique used to assist in the extraction of vegetable oils. There has been no research on the effects of PEF on virgin olive oil (VOO) quality and antioxidant activity to date. The present study aimed to analyze the effects of PEF on oil yield, quality, and in vitro antioxidant activity of “Koroneiki” extra virgin olive oil. The results show that the PEF treatment increased the oil yield by 5.6%, but had no significant effect on the saponification value, K232, K270, and ∆K value of the VOO. PEF treatment reduced the oleic acid content by 3.12%, but had no significant effect on the content of palmitic acid, linoleic acid, linolenic acid, arachidonic acid, stearic acid, oleic acid, and palmitic acid. After PEF treatment, the levels of total phenolics, total flavonoids, and oleuropein increased by 7.6%, 18.3% and 76%, respectively. There was no significant effect on the levels of 4 phenolic acids (vanillic acid, p-coumaric acid, ferulic acid and cinnamic acid), 2 lignans (lignans and apigenin), hydroxytyrosol, and 3 pigments (lutein, demagnetized chlorophyll, and carotenoids). In addition, PEF treatment significantly increased the content of tocopherols, with α, β, γ, and δ tocopherols increasing by 9.8%, 10.7%, 13.6% and 38.4%, respectively. The free radical scavenging ability of DPPH and ABTS was also improved. In conclusion, the use of PEF significantly increased the yield of VOO oil as well as the levels of total phenolics, total flavonoids, oleuropein, tocopherol, and in vitro antioxidant activity.

Biological autoluminescence enables effective monitoring of yeast cell electroporation.

The application of pulsed electric fields (PEFs) is becoming a promising tool for application in biotechnology, and the food industry. However, real-time monitoring of the efficiency of PEF treatment conditions is challenging, especially at the industrial scale and in continuous production conditions. To overcome this challenge, we have developed a straightforward setup capable of real-time detection of yeast biological autoluminescence (BAL) during pulsing. Saccharomyces cerevisiae culture was exposed to 8 pulses of 100 µs width with electric field strength magnitude 2-7kV cm-1. To assess the sensitivity of our method in detecting yeast electroporation, we conducted a comparison with established methods including impedance measurements, propidium iodide uptake, cell growth assay, and fluorescence microscopy. Our results demonstrate that yeast electroporation can be instantaneously monitored during pulsing, making it highly suitable for industrial applications. Furthermore, the simplicity of our setup facilitates its integration into continuous liquid flow systems. Additionally, we have established quantitative indicators based on a thorough statistical analysis of the data that can be implemented through a dedicated machine interface, providing efficiency indicators for analysis.

Inactivation of Trichinella spp. in naturally infected boar meat after Pulsed Electric Field (PEF) treatments

Larvae of the nematode Trichinella are capable of causing parasitic infections in humans after the consumption of uncooked meat or meat products, leading to severe symptoms and even death. Meat inspection is costly and tends to progressively be derogated in holdings applying controlled housing conditions in certain regions. Our study focuses on the evaluation of the efficacy of Pulsed Electric Fields (PEF) in the inactivation of Trichinella spp., including excysted larvae isolated by artificial digestion and encapsulated larvae found in meat from naturally infected wild boars. Microscopic examination of unstained and propidium-iodide-stained larvae suspensions showed that most of the excysted larvae were inactivated 10 min after an intermediate PEF treatment (1 kV/cm, 0.41 kJ/kg). Treating excysted larvae with the mildest PEF treatment (0.5 kV/cm, 0.05 kJ/kg) combined with a 3% NaCl incubation resulted in synergistic inactivation. The application of 3 kV/cm (20 kJ/kg) to wild boar meat resulted in the inactivation of over 90% of encapsulated Trichinella larvae. The viability of Trichinella in meat was inversely correlated to the field strength applied (1–6 kV/cm) for equal energy input (20 kJ/kg). These findings demonstrate that PEF technology can potentially serve as a novel strategy for the inactivation of Trichinella larvae in meat.

Sustainable Valorization of Industrial Cherry Pomace: A Novel Cascade Approach Using Pulsed Electric Fields and Ultrasound Assisted-Extraction.

In this study, a two-stage cascade extraction process utilizing pulsed electric fields (PEF) (3 kV/cm, 10 kJ/kg) for initial extraction, followed by ultrasound (US) (200 W, 20 min)-assisted extraction (UAE) in a 50% (v/v) ethanol-water mixture (T = 50 °C, t = 60 min), was designed for the efficient release of valuable intracellular compounds from industrial cherry pomace. The extracted compounds were evaluated for total phenolic content (TPC), flavonoid content (FC), total anthocyanin content (TAC), and antioxidant activity (FRAP), and were compared with conventional solid-liquid extraction (SLE). Results showed that the highest release of bioactive compounds occurred in the first stage, which was attributed to the impact of PEF pre-treatment, resulting in significant increases in TPC (79%), FC (79%), TAC (83%), and FRAP values (80%) of the total content observed in the post-cascade PEF-UAE process. The integration of UAE into the cascade process further augmented the extraction efficiency, yielding 21%, 49%, 56%, and 26% increases for TPC, FC, TAC, and FRAP, respectively, as compared to extracts obtained through a second-stage conventional SLE. HPLC analysis identified neochlorogenic acid, 4-p-coumaroylquinic, and cyanidin-3-O-rutinoside as the predominant phenolic compounds in both untreated and cascade-treated cherry pomace extracts, and no degradation of the specific compounds occurred upon PEF and US application. SEM analysis revealed microstructural changes in cherry pomace induced by PEF and UAE treatments, enhancing the porosity and facilitating the extraction process. The study suggests the efficiency of the proposed cascade PEF-UAE extraction approach for phenolic compounds from industrial cherry pomace with potential applications to other plant-based biomasses.