Pulse Spectral Phase Research Articles

Compact in-line temporal measurement of laser pulses with amplitude swing.

A method of ultrashort laser pulse reconstruction is presented, consisting on the analysis of the nonlinear signal obtained from the interference of the pulse with a replica of itself at a given time delay while varying the relative amplitude between the pulses. The resulting spectral traces are analyzed both analytically and numerically, showing the encoding of the input pulse spectral phase. A reconstruction algorithm is discussed and applied to extract the spectral phase and, jointly to the measured spectral amplitude, reconstructing the pulse. In order to validate the technique, an experimental in-line implementation of the characterization concept is compared to the results from a stablished technique, obtaining a good agreement at different input pulse cases. In sum, a new technique is presented, showing the capability to reconstruct a broad range of temporal pulse durations while its implementation is robust and straightforward, able to be easily adapted to diverse pulse duration and central wavelength ranges.

Measurement of the ultrashort pulse spectral phase based on dispersive Fourier transformation.

A technique for measuring the spectral phase of an ultrashort pulse is developed based on the dispersive Fourier transformation method, as an alternative to spectral interferometric methods. The pulse spectral phase is measured by transferring the information from the spectral to the temporal domain by stretching the pulse to reach the far field of dispersion. We have implemented the technique through sum-frequency generation by using the laser pulse as a reference and have experimentally demonstrated the direct spectral phase measurement of various amplitude-modulated pulses.

Tunable high-harmonic generation by chromatic focusing of few-cycle laser pulses

In this work we study the impact of chromatic focusing of few-cycle laser pulses on high-order harmonic generation (HHG) through analysis of the emitted extreme ultraviolet (XUV) radiation. Chromatic focusing is usually avoided in the few-cycle regime, as the pulse spatio-temporal structure may be highly distorted by the spatiotemporal aberrations. Here, however, we demonstrate it as an additional control parameter to modify the generated XUV radiation. We present experiments where few-cycle pulses are focused by a singlet lens in a Kr gas jet. The chromatic distribution of focal lengths allows us to tune HHG spectra by changing the relative singlet-target distance. Interestingly, we also show that the degree of chromatic aberration needed to this control does not degrade substantially the harmonic conversion efficiency, still allowing for the generation of supercontinua with the chirped-pulse scheme, demonstrated previously for achromatic focussing. We back up our experiments with theoretical simulations reproducing the experimental HHG results depending on diverse parameters (input pulse spectral phase, pulse duration, focus position) and proving that, under the considered parameters, the attosecond pulse train remains very similar to the achromatic case, even showing cases of isolated attosecond pulse generation for near single-cycle driving pulses.

Discrete dispersion scanning as a simple method for broadband femtosecond pulse characterization.

A simple and easy to implement technique for femtosecond pulse characterization is proposed and experimentally verified. It is based on the introduction of a known amount of dispersion (by controlling the number of passes through dispersive material) and subsequent recording of the spectral positions of second harmonic peaks obtained in a non-linear crystal. Such dependence allows for direct retrieval of the pulse spectral phase. The presented pulse characterization method is beneficial especially for broadband pulses, where the second harmonic spectrum exceeds the detection bandwidth of a single spectrometer.

Microjoule-level, tunable sub-10 fs UV pulses by broadband sum-frequency generation.

We introduce a scheme for the generation of tunable few-optical-cycle UV pulses based on sum-frequency generation between a broadband visible pulse and a narrowband pulse ranging from the visible to the near-IR. This configuration generates broadband UV pulses tunable from 0.3 to 0.4 μm, with energy up to 1.5 μJ. By exploiting nonlinear phase transfer, transform-limited pulse durations are achieved. Full characterization of the UV pulse spectral phase is obtained by two-dimensional spectral shearing interferometry, which is here extended to the UV spectral range. We demonstrate clean 8.4 fs UV pulses.

Coherent artifact in modern pulse measurements

We simulate multishot intensity-and-phase measurements of unstable trains of complex ultrashort pulses using second-harmonic-generation (SHG) frequency-resolved optical gating (FROG) and spectral-phase interferometry for direct electric-field reconstruction (SPIDER). Both techniques fail to see the pulse structure. But FROG yields the correct average pulse duration and suggests the instability by exhibiting significant disagreement between measured and retrieved traces. SPIDER retrieves the correct average spectral phase but significantly underestimates the average pulse duration. In short, SPIDER measures only the coherent artifact. An analytical calculation confirms this last fact.

Nonlinear spectrum effect on the coherent control of molecular systems

This work demonstrates that the detuning of the fs-laser spectrum from the two-photon absorption band of organic materials can be used to reach further control of the two-photon absorption by pulse spectral phase manipulation. We investigate the coherent control of the two-photon absorption in imidazole–thiophene core compounds presenting distinct two-photon absorption spectra. The coherent control, performed using pulse phase shaping and genetic algorithm, exhibited different growth rates for each sample. Such distinct trends were explained by calculating the two-photon absorption probability considering the intrapulse interference mechanism, taking into account the two-photon absorption spectrum of the samples. Our results indicate that tuning the relative position between the nonlinear absorption and the pulse spectrum can be used as a novel strategy to optimize the two-photon absorption in broadband molecular systems.

Prism-lens dispersive delay line

A new dispersive prism-lens delay line has been designed and experimentally tested, which is based on a direct control of the spectral phase of pulses. Advantages of the proposed device are the compact design and the possibility of controlling both magnitude and sign of dispersion.

Simple and highly sensitive optical pulse-characterization method based on electro-optic spectral signal differentiation

A very simple self-referenced, linear pulse-characterization technique based on spectral phase reconstruction by frequency-domain signal differentiation is introduced. This technique can be implemented using electro-optic intensity modulation of the pulse under test with a synchronized RF sinusoid. The pulse spectral phase profile can be accurately and unambiguously reconstructed from only two measured energy spectra, i.e., at the input and at the output of the modulator, using a direct analytic equation. The method is experimentally demonstrated by precisely characterizing microwatt-power picosecond pulses after linear dispersion through short sections (50-700 m) of conventional single-mode fiber.

Comment on "Coherent Control of Retinal Isomerization in Bacteriorhodopsin"

Prokhorenko et al. (Research Articles, 1 September 2006, p. 1257) reported that, in the weak-field regime, the efficiency of retinal isomerization in bacteriorhodopsin can be controlled by modulating the spectral phase of the photoexcitation pulse. However, in the linear excitation regime, the signal measured in an experiment involving a time-invariant, stationary process can be shown to be independent of the pulse spectral phase.

Coherent enhancement of broadband frequency up-conversion in BBO crystal by shaping femtosecond laser pulses

An optimal feedback control of broadband frequency up-conversion in BBO crystal is experimentally demonstrated by shaping femtosecond laser pulses based on genetic algorithm, and the frequency up-conversion efficiency can be enhanced by ∼16%. SPIDER results show that the optimal laser pulses have shorter pulse-width with the little negative chirp than the original pulse with the little positive chirp. By modulating the fundamental spectral phase with periodic square distribution on SLM-256, the frequency up-conversion can be effectively controlled by the factor of about 17%. The experimental results indicate that the broadband frequency up-conversion efficiency is related to both of second harmonic generation (SHG) and sum frequency generation (SFG), where the former depends on the fundamental pulse intensity, and the latter depends on not only the fundamental pulse intensity but also the fundamental pulse spectral phase.