Pulmonary Drug Absorption Research Articles

Nebuliser therapy in critical care: The past, present and future

Nebulisers are devices that reduce a body of liquid into a fine aerosol suitable for inhalation. Utilising the efficiency of pulmonary drug absorption, they offer a safe and powerful modality for local and systemic drug delivery in the treatment of critical illness. In comparison to conventional jet (JN) and ultrasonic nebulisers (USN), the advent of vibrating mesh nebulisers (VMN) has significantly improved the therapeutic potential of modern devices. This review article aims to summarise the history and evolution of nebulisers from first inception through to the modern vibrating mesh technology. It provides an overview on the basic science of nebulisation and pulmonary drug delivery, and the current use of nebulised therapies in critical care.

Abstracts from The Aerosol Society Drug Delivery to the Lungs 33.

Abstracts from The Aerosol Society Drug Delivery to the Lungs 33.

Spermine with Sodium Taurocholate Enhances Pulmonary Absorption of Macromolecules in Rats.

The improvement effect of the combined use of spermine (SPM), a polyamine, with sodium taurocholate (STC) on the pulmonary drug absorption was investigated utilizing poorly absorbable drugs with various molecular sizes in rats. The pulmonary absorption of rebamipide, a low molecular but poorly absorbable drug after oral administration, was significantly improved by the combined use of SPM with STC (SPM-STC formulation), while poly- L-lysine did not show a significant change in rebamipide absorption from the lungs. Furthermore, the safety of the SPM-STC formulation for the lungs was assessed in rats by the histopathological study and any local toxicity was not observed while poly-L-lysine, a typical chemical causing the toxicity for the epithelial cells, provided several histopathological changes. In addition, the SPM-STC formulation significantly improved the pulmonary absorption of fluorescein isothiocyanate dextran 4 (FD-4, Mw ca 4000) and interferon-α (IFN-α,Mw ca 25,000) as well. Our present results clearly indicated that the SPM-STC formulation significantly improved the pulmonary absorption of poorly absorbable small and large molecular drugs without any harmful effects on the lungs. Therefore, the SPM-STC formulation would be a useful one for the pulmonary absorption of drugs, specifically macromolecular ones, which are very difficult to be absorbed after oral administration.

Inferring pulmonary exposure based on clinical PK data: accuracy and precision of model-based deconvolution methods

Determining and understanding the target-site exposure in clinical studies remains challenging. This is especially true for oral drug inhalation for local treatment, where the target-site is identical to the site of drug absorption, i.e., the lungs. Modeling and simulation based on clinical pharmacokinetic (PK) data may be a valid approach to infer the pulmonary fate of orally inhaled drugs, even without local measurements. In this work, a simulation-estimation study was systematically applied to investigate five published model structures for pulmonary drug absorption. First, these models were compared for structural identifiability and how choosing an inadequate model impacts the inference on pulmonary exposure. Second, in the context of the population approach both sequential and simultaneous parameter estimation methods after intravenous administration and oral inhalation were evaluated with typically applied models. With an adequate model structure and a well-characterized systemic PK after intravenous dosing, the error in inferring pulmonary exposure and retention times was less than twofold in the majority of evaluations. Whether a sequential or simultaneous parameter estimation was applied did not affect the inferred pulmonary PK to a relevant degree. One scenario in the population PK analysis demonstrated biased pulmonary exposure metrics caused by inadequate estimation of systemic PK parameters. Overall, it was demonstrated that empirical modeling of intravenous and inhalation PK datasets provided robust estimates regarding accuracy and bias for the pulmonary exposure and pulmonary retention, even in presence of the high variability after drug inhalation.

Physiologically Based Pharmacokinetic Modelling of Inhaled Nemiralisib: Mechanistic Components for Pulmonary Absorption, Systemic Distribution, and Oral Absorption.

Background and ObjectivesPhysiologically based pharmacokinetic (PBPK) modelling has evolved to accommodate different routes of drug administration and enables prediction of drug concentrations in tissues as well as plasma. The inhalation route of administration has proven successful in treating respiratory diseases but can also be used for rapid systemic delivery, holding great promise for treatment of diseases requiring systemic exposure. The objective of this work was to develop a PBPK model that predicts plasma and tissue concentrations following inhalation administration of the PI3Kδ inhibitor nemiralisib.MethodsA PBPK model was built in GastroPlus® that includes a complete mechanistic description of pulmonary absorption, systemic distribution and oral absorption following inhalation administration of nemiralisib. The availability of clinical data obtained after intravenous, oral and inhalation administration enabled validation of the model with observed data and accurate assessment of pulmonary drug absorption. The PBPK model described in this study incorporates novel use of key parameters such as lung systemic absorption rate constants derived from human physiological lung blood flows, and implementation of the specific permeability-surface area product per millilitre of tissue cell volume (SpecPStc) to predict tissue distribution.ResultsThe inhaled PBPK model was verified using plasma and bronchoalveolar lavage fluid concentration data obtained in human subjects. Prediction of tissue concentrations using the permeability-limited systemic disposition tissue model was further validated using tissue concentration data obtained in the rat following intravenous infusion administration to steady state.ConclusionsFully mechanistic inhaled PBPK models such as the model described herein could be applied for cross molecule assessments with respect to lung retention and systemic exposure, both in terms of pharmacology and toxicology, and may facilitate clinical indication selection.

RETRACTED: Pulmonary route of administration is instrumental in developing therapeutic interventions against respiratory diseases

Pulmonary route of drug delivery has drawn significant attention due to the limitations associated with conventional routes and available treatment options. Drugs administered through pulmonary route has been an important research area that focuses on to developing effective therapeutic interventions for asthma, chronic obstructive pulmonary disease, tuberculosis, lung cancer etc. The intravenous route has been a natural route of delivery of proteins and peptides but associated with several issues including high cost, needle-phobia, pain, sterility issues etc. These issues might be addressed by the pulmonary administration of macromolecules to achieving an effective delivery and efficacious therapeutic impact. Efforts have been made to develop novel drug delivery systems (NDDS) such as nanoparticles, microparticles, liposomes and their engineered versions, polymerosomes, micelles etc to achieving targeted and sustained delivery of drug(s) through pulmonary route. Further, novel approaches such as polymer-drug conjugates, mucoadhesive particles and mucus penetrating particles have attracted significant attention due to their unique features for an effective delivery of drugs. Also, use of semi flourinated alkanes is in use for improvising the pulmonary delivery of lipophilic drugs. Present review focuses on to unravel the mechanism of pulmonary absorption of drugs for major pulmonary diseases. It summarizes the development of interventional approaches using various particulate and vesicular drug delivery systems. In essence, the orchestrated attempt presents an inflammatory narrative on the advancements in the field of pulmonary drug delivery.

Pulmonary drug absorption and systemic exposure in human: Predictions using physiologically based biopharmaceutics modeling

Systemic exposure of inhaled drugs is used to estimate the local lung exposure and assess systemic side effects for drugs with local pharmacological targets. Predicting systemic exposure is therefore central for successful development of drugs intended to be inhaled. Currently, these predictions are based mainly on data from in vitro experiments, but the accuracy of these predictions might be improved if they were based on data with higher physiological relevance. In this study, systemic exposure was simulated by applying biopharmaceutics input parameters from isolated perfused rat lung (IPL) data to a lung model developed in MoBi® as an extension to the full physiologically-based pharmacokinetic (PBPK) model in PK-Sim®. These simulations were performed for a set of APIs with a variety of physicochemical properties and formulation types. Simulations based on rat IPL data were also compared to simulations based on in vitro data. The predictive performances of the simulations were evaluated by comparing simulated plasma concentration-time profiles to clinical observations after pulmonary administration. Simulations using IPL-based input parameters predicted systemic exposure well, with predicted AUCs within two-fold of the observed value for nine out of ten drug compounds/formulations, and predicted Cmax values within two-fold for eight out of ten drug compounds/formulations. Simulations using input parameters based on IPL data performed generally better than simulations based on in vitro input parameters. These results suggest that the developed model in combination with IPL data can be used to predict human lung absorption for compounds with different physicochemical properties and types of inhalation formulations.

Drug Absorption Parameters Obtained Using the Isolated Perfused Rat Lung Model Are Predictive of Rat In Vivo Lung Absorption

The ex vivo isolated perfused rat lung (IPL) model has been demonstrated to be a useful tool during drug development for studying pulmonary drug absorption. This study aims to investigate the potential use of IPL data to predict rat in vivo lung absorption. Absorption parameters determined from IPL data (ex vivo input parameters) in combination with intravenously determined pharmacokinetic data were used in a biopharmaceutics model to predict experimental rat in vivo plasma concentration-time profiles and lung amount after inhalation of five different inhalation compounds. The performance of simulations using ex vivo input parameters was compared with simulations using in vitro input parameters, to determine whether and to what extent predictability could be improved by using input parameters determined from the more complex ex vivo model. Simulations using ex vivo input parameters were within twofold average difference (AAFE < 2) from experimental in vivo data for all compounds except one. Furthermore, simulations using ex vivo input parameters performed significantly better than simulations using in vitro input parameters in predicting in vivo lung absorption. It could therefore be advantageous to base predictions of drug performance on IPL data rather than on in vitro data during drug development to increase mechanistic understanding of pulmonary drug absorption and to better understand how different substance properties and formulations might affect in vivo behavior of inhalation compounds.

Caproyl-Modified G2 PAMAM Dendrimer (G2-AC) Nanocomplexes Increases the Pulmonary Absorption of Insulin.

We aimed to investigate the absorption-enhancing effect (AEE) of caproyl-modified G2 PAMAM dendrimer (G2-AC) on peptide and protein drugs via the pulmonary route. In this study, G2 PAMAM dendrimer conjugates modified with caproic acid was synthesized, the pulmonary absorption of insulin as models with or without G2-AC were evaluated. The results indicated that G2-AC6 exhibited a greatest AEE for insulin in various caproylation levels of G2-AC. G2-AC6 could significantly enhance the absorption of insulin, and the AEE of G2-AC6 was concentration-dependent. In toxicity tests, G2-AC6 displayed no measurable cytotoxicity to the pulmonary membranes over a concentration range from 0.1% (w/v) to 1.0% (w/v). Measurements of the TEER and permeability showed that G2-AC6 significantly reduced the TEER value of CF and increased its Papp value. The results suggested that G2-AC6 could cross epithelial cells by means of a combination of paracellular and transcellular pathways. These findings suggested G2-AC6 at lower concentrations (below 1.0%, w/v) might be promising absorption enhancers for increasing the pulmonary absorption of peptide and protein drugs.

Inkjet printing platform for fabrication of uniform, excipient-free drug particles for pulmonary delivery in a preclinical setting

Drop on demand inkjet printing was applied to obtain excipient-free particles with a narrow size distribution. The objective of this work was to establish the general applicability of the process on a range of structurally different active pharmaceutical ingredients (APIs). Four APIs; fluticasone, budesonide, tiotropium and olodaterol were utilized. The droplet generation protocols could be established based on the solvent system, chosen with regard to stable printability and solubility of the APIs. Triple actuation pulse was applied to generate droplets of desired dimensions. Drying temperature and dispensing frequency were used to optimize the drying of the droplets. The particle size of the product was dictated by the concentration of the ink and the volume of the droplets. These parameters were used to obtain the particle diameters of 1–6 μm. Intra-tracheal instillation to rats of fluticasone in suspensions of polydisperse spray dried particles and print dried particles of 3 and 5 μm was performed. Amounts of residual drug content in the lung and systemic exposures differed depending on the total surface area. The developed methodology can improve the mechanistic understanding of pulmonary drug dissolution and absorption on the wide range of structurally diverse APIs in the preclinical setting.

A compartment-quasi-3D multiscale approach for drug absorption, transport, and retention in the human lungs.

Most current models used for modeling the pulmonary drug absorption, transport, and retention are 0D compartmental models where the airways are generally split into the airways and alveolar sections. Such block models deliver low fidelity solutions and the spatial lung drug concentrations cannot be obtained. Other approaches use high fidelity CFD models with limited capabilities due to their exorbitant computational cost. Recently, we presented a novel, fast-running and robust quasi-3D (Q3D) model for modeling the pulmonary airflow. This Q3D method preserved the 3D lung geometry, delivered extremely accurate solutions, and was 25000 times faster in comparison to the CFD methods. In this paper, we present a Q3D-compartment multiscale combination to model the pulmonary drug absorption, transport, and retention. The initial deposition is obtained from CFD simulations. The lung absorption compartment model of Yu and Rosania is adapted to this multiscale format. The lung is modeled in the Q3D format till the eighth airway generation. The remainder of the lung along with the systemic circulation and elimination processes was modeled using compartments. The Q3D model is further adapted, by allowing for various heterogeneous annular lung layers. This allows us to model the drug transport across the layers and along the lung. Using this multiscale model, the spatiotemporal drug concentrations in the different lung layers and the temporal concentration in the plasma are obtained. The concentration profile in the plasma was found to be better aligned with the experimental findings in comparison with compartmental model for the standard test cases. Thus, this multiscale model can be used to optimize the target-specific drug delivery and increase the localized bioavailability, thereby facilitating applications from the bench to bedside for various patient/lung-disease variations.

A Comparison of Drug Transport in Pulmonary Absorption Models: Isolated Perfused rat Lungs, Respiratory Epithelial Cell Lines and Primary Cell Culture

PurposeTo evaluate the ability of human airway epithelial cell layers and a simple rat isolated perfused lung (IPL) model to predict pulmonary drug absorption in rats in vivo.MethodThe permeability of seven compounds selected to possess a range of lipophilicity was measured in two airway cell lines (Calu-3 and 16HBE14o-), in normal human bronchial epithelial (NHBE) cells and using a simple isolated perfused lungs (IPL) technique. Data from the cell layers and ex vivo lungs were compared to published absorption rates from rat lungs measured in vivo.ResultsA strong relationship was observed between the logarithm of the in vivo absorption half-life and the absorption half-life in the IPL (r = 0.97; excluding formoterol). Good log-linear relationships were also found between the apparent first-order absorption rate in vivo and cell layer permeability with correlation coefficients of 0.92, 0.93, 0.91 in Calu-3, 16HBE14o- and NHBE cells, respectively.ConclusionThe simple IPL technique provided a good prediction of drug absorption from the lungs, making it a useful method for empirical screening of drug absorption in the lungs. Permeability measurements were similar in all the respiratory epithelial cell models evaluated, with Calu-3 having the advantage for routine permeability screening purposes of being readily availability, robust and easy to culture.

Preparation, in vitro characterization, and in vivo pharmacokinetic evaluation of respirable porous microparticles containing rifampicin.

This study aimed to prepare and evaluate rifampicin microparticles for the lung delivery of rifampicin as respirable powder. The microparticles were prepared using chitosan by the spray-drying method and evaluated for aerodynamic properties and pulmonary drug absorption. To control the drug release, tripoly-phosphate in different concentrations 0.6, 0.9, 1.2, and 1.5 was employed to get a sustained drug release profile. The microparticles were evaluated for drug loading, % entrapment efficiency, tapped density, morphological characteristics, and in vitro drug release studies. Aerosol properties were determined using the Andersen cascade impactor. Porous microparticles with particle sizes (d0.5) less than 10 μm were obtained. The entrapment of rifampicin in microparticles was up to 72%. In vitro drug release suggested that the crosslinked microparticles showed sustained release for more than 12 hrs. The drug release rate was found to be decreased as the TPP concentration was increased. The microparticles showed a fine particle fraction in the range of 55–63% with mass median aerodynamic diameter (MMAD) values below 3 μm. The in vivo pulmonary absorption of the chitosan microparticles suggested a sustained drug release profile up to 72 hrs with an elimination rate of 0.010 per hr. The studies revealed that the spray-dried porous microparticles have suitable properties to be used as respirable powder in rifampicin delivery to the lungs.

Polyamidoamine Dendrimers Can Improve the Pulmonary Absorption of Insulin and Calcitonin in Rats

The absorption-enhancing effects of polyamidoamine (PAMAM) dendrimers with various generations (G0-G3) and concentrations [0.1%-1.0% (w/v)] on the pulmonary absorption of peptide and protein drugs were studied in rats. Insulin and calcitonin were chosen as models of peptide and protein drugs, and their pulmonary absorption with or without PAMAM dendrimers was examined by in vivo pulmonary absorption studies. PAMAM dendrimers significantly increased the pulmonary absorption of insulin and calcitonin in rats, and their absorption-enhancing effects were generation dependent. The rank order of absorption enhancement effect of these PAMAM dendrimers was G3 > G2 > G1 > G0. For the same generation, the absorption-enhancing effects of PAMAM dendrimers were shown to be concentration dependent. The toxicity of these PAMAM dendrimers in the lung tissues was evaluated by measuring the release of protein and the activities of lactate dehydrogenase (LDH) in bronchoalveolar lavage fluid (BALF). The PAMAM dendrimers with various generations and concentrations did not significantly increase the release of protein and the activities of LDH in BALF, indicating that these dendrimers did not cause any membrane damage to the lung tissues. The zeta potentials of insulin and calcitonin solutions changed to positive by the addition of PAMAM dendrimers, and the degree of positive charge as determined by the zeta potentials was linearly correlated with the absorption-enhancing effects of the PAMAM dendrimers. This positive charge of the PAMAM dendrimers might be related to their absorption-enhancing mechanisms for improving the pulmonary absorption of insulin and calcitonin in rats. In conclusion, the PAMAM dendrimers are suitable absorption enhancers to improve the pulmonary absorption of insulin and calcitonin without any membrane damage to the respiratory tissues.

A new Pharmaceutical Aerosol Deposition Device on Cell Cultures (PADDOCC) to evaluate pulmonary drug absorption for metered dose dry powder formulations

Absorption studies with aerosol formulation delivered by metered dose inhalers across cell- and tissue-based in vitro models of the pulmonary epithelia are not trivial due to the complexity of the processes involved: (i) aerosol generation and deposition, (ii) drug release from the carrier, and (iii) absorption across the epithelial air–blood barrier. In contrast to the intestinal mucosa, pulmonary epithelia are only covered by a thin film of lining fluid. Submersed cell culture systems would not allow to studying the deposition of aerosol particles and their effects on this delicate epithelial tissue. We developed a new Pharmaceutical Aerosol Deposition Device on Cell Cultures (PADDOCC) to mimic the inhalation of a single metered aerosol dose and its subsequent deposition on filter-grown pulmonary epithelial cell monolayers exposed to an air–liquid interface. The reproducibility of deposition of these dry powder aerosols and subsequent drug transport across Calu-3 monolayers with commercially available dry powder inhalers containing salbutamol sulphate or budesonide could be demonstrated. In the context of developing new dry powder aerosol formulations, PADDOCC appears as a useful tool, allowing reducing animal testing and faster translation into clinical trials.

Drug transporters in the lung—do they play a role in the biopharmaceutics of inhaled drugs?

The role of transporters in drug absorption, distribution and elimination processes as well as in drug–drug interactions is increasingly being recognised. Although the lungs express high levels of both efflux and uptake drug transporters, little is known of the implications for the biopharmaceutics of inhaled drugs. The current knowledge of the expression, localisation and functionality of drug transporters in the pulmonary tissue and the few studies that have looked at their impact on pulmonary drug absorption is extensively reviewed. The emphasis is on transporters most likely to affect the disposition of inhaled drugs: (1) the ATP-binding cassette (ABC) superfamily which includes the efflux pumps P-glycoprotein (P-gp), multidrug resistance associated proteins (MRPs), breast cancer resistance protein (BCRP) and (2) the solute-linked carrier (SLC and SLCO) superfamily to which belong the organic cation transporter (OCT) family, the peptide transporter (PEPT) family, the organic anion transporter (OAT) family and the organic anion transporting polypeptide (OATP) family. Whenever available, expression and localisation in the intact human tissue are compared with those in animal lungs and respiratory epithelial cell models in vitro. The influence of lung diseases or exogenous agents on transporter expression is also mentioned. © 2009 Wiley-Liss, Inc. and the American Pharmacists Association J Pharm Sci 99: 2240–2255, 2010

Pulmonary Targeting with Biodegradable Salbutamol-Loaded Nanoparticles

Aerosol therapy using particulate drug carriers has become an increasingly attractive method to deliver therapeutic or diagnostic compounds to the lung. Polymeric nanoparticles are widely investigated carriers in nanomedicine. The targeted and controlled release of drugs from nanoparticles for pulmonary delivery, however, is a research field that has been so far rather unexploited. Therefore, the objective of this study was to compare the pulmonary absorption and distribution characteristics of salbutamol after aerosolization as solution or entrapped into novel polymeric nanoparticles in an isolated rabbit lung model (IPL). Physicochemical properties, morphology, encapsulation efficiency, in vitro drug release, stability of nanoparticles to nebulization, as well as pulmonary drug absorption and distribution after nebulization in the IPL were investigated. Salbutamol-loaded poly(D,L-lactide-co-glycolide) (PLGA) and poly(vinyl sulfonate-co-vinyl alcohol)-graft-poly(D,L-lactide-co-glycolide) (VS(72)-10) nanoparticles were prepared by a modified solvent displacement technique with a mean particle size of approximately 120 nm and a polydispersity index below 0.150. VS(72)-10 nanoparticles showed a more negative zeta-potential of -54.2 +/- 3.3 mV compared to PLGA nanoparticles (-36.5 +/- 2.6 mV). Salbutamol encapsulation efficiency was 25.2 +/- 4.9% and 63.4 +/- 3.5% for PLGA and VS(72)-10 nanoparticles, respectively. After nebulization utilizing the MicroSprayer physicochemical properties of salbutamol-loaded VS(72)-10 nanoparticles were virtually unchanged, whereas nebulized salbutamol-loaded PLGA nanoparticles showed a significant increase in mean particle size and polydispersity. In vitro release studies demonstrated a sustained release of the encapsulated salbutamol from VS(72)-10 nanoparticles. In parallel, a sustained salbutamol release profile was observed after aerosol delivery of these particles to the IPL as reflected by a lower salbutamol recovery in the perfusate (40.2 +/- 5.8%) when compared to PLGA nanoparticles (55.2 +/- 9.1%) and salbutamol solution (62.8 +/- 7.1%). The current study suggests that inhalative delivery of biodegradable nanoparticles may be a viable approach for the treatment of respiratory diseases.

Cationic liposomes as carriers for aerosolized formulations of an anionic drug: Safety and efficacy study

This study tests the hypothesis that pegylated cationic liposomes are a viable carrier for inhalable formulations of low molecular weight heparin, an anionic drug. Cationic liposomal formulations of low molecular weight heparin were prepared by the hydration method using 1,2-dioleoyl-3-trimethylammonium-propane (chloride salt), cholesterol and 1,2-distearoyl- sn-glycero-3-phosphoethanolamine-N-[methoxy(polyethyleneglycol)-2000]. The formulations were characterized for particle size, entrapment efficiency, pulmonary absorption and pharmacological efficacy. For absorption studies, the formulations were administered to anesthetized male Sprague–Dawley rats via the pulmonary route and drug absorption was monitored by measuring plasma anti-factor Xa activity. The pharmacological efficacy of the formulations was studied in rodent models of pulmonary embolism and deep vein thrombosis. The mean particle size of the liposomes was 104.8 ± 20.7 nm and the drug entrapment efficiency was 90.3 ± 0.1%. The half-life of the cationic liposomal formulation was 10.6 ± 0.2 h, a 2.2-fold increase compared to low molecular weight heparin formulated in saline, and the relative bioavailability was ∼73.4 ± 19.1% when compared to subcutaneously administered drug. A once-every-other-day inhaled dose of the formulation showed similar efficacy in reducing thrombus weight as a once-daily dose of subcutaneously administered drug. Likewise, cationic liposomal formulations administered via the pulmonary route 6 h prior to embolization in the lungs showed a thrombolytic effect comparable to that of low molecular weight heparin administered subcutaneously 2 h before embolization. Histological examination of lung tissue and measurement of injury markers in bronchoalveolar lavage fluid suggest that the formulations did not produce extensive damage. The results demonstrate that pegylated cationic liposomes could be a viable carrier for an inhalable formulation of low molecular weight heparin.

Control of Pulmonary Absorption of Drugs by Various Pharmaceutical Excipients

AbstractChemInform is a weekly Abstracting Service, delivering concise information at a glance that was extracted from about 200 leading journals. To access a ChemInform Abstract, please click on HTML or PDF.

Control of Pulmonary Absorption of Drugs by Various Pharmaceutical Excipients

In general, drugs are well absorbed from the lung, and the pulmonary absorption of therapeutic protein and peptide drugs, which are poorly absorbed from the gastrointestinal tract, was observed. However, locally acting drugs including antiasthmatic agents, bronchodilators, and expectorants should be localized for a long period in the lung tissues. In this study, the effects of various viscous vehicles on the absorption of theophylline and fluticasone propionate after intrapulmonary administration were examined in rats. Carrageenans were effective in regulating the absorption rate of these drugs. On the other hand, the bioavailability of therapeutic protein and peptide drugs with relatively high molecular weights from the pulmonary route is still poor when compared with the parenteral route. Therefore we examined the effects of chitosan and chitosan oligomers on the pulmonary absorption of interferon-alpha and salmon calcitonin in rats. Chitosan oligomers were effective in improving the pulmonary absorption of these drugs, and chitosan hexamer appeared to be markedly more effective than other oligomers. Furthermore, the present study indicated that chitosan oligomers did not cause any membrane damage to rat pulmonary tissues. In conclusion, it is suggested that various pharmaceutical excipients achieved the sustained pulmonary absorption of locally acting drugs and the improved pulmonary bioavailability for therapeutic protein and peptide drugs.