Protoplast Isolation Research Articles

A Comparison of DNA-Methylation during Protoplast Culture of Ponkan Mandarin (Citrus reticulata Blanco) and Tobacco (Nicotiana tabacum L.)

The epigenetic variation in protoplast regeneration is a topic that has attracted interest recently. To elucidate the role of DNA methylation in the regeneration of protoplasts from the ponkan (Citrus reticulata), this study employs the methylation-sensitive amplification polymorphism (MSAP) molecular marker technique to analyze changes in DNA methylation levels and patterns during the isolation and culture of protoplasts from ponkan and tobacco. Additionally, differential DNA methylation fragments are cloned, sequenced, and subjected to bioinformatics analysis. The results reveal that, for non-regenerable ponkan mesophyll protoplasts, DNA methylation levels increase by 3.98% after isolation and then show a trend of initial decrease followed by an increase during culture. In contrast, for regenerable ponkan callus protoplasts and tobacco mesophyll protoplasts, DNA methylation levels decrease by 1.75% and 2.33%, respectively, after isolation. During culture, the DNA methylation levels of ponkan callus protoplasts first increase and then decrease, while those of tobacco mesophyll protoplasts show an opposite trend of initial decrease followed by an increase. Regarding DNA methylation patterns, ponkan mesophyll protoplasts exhibit primarily hypermethylation changes accompanied by a small amount of gene demethylation, whereas ponkan callus protoplasts are dominated by demethylation changes with some genes undergoing hypermethylation. The methylation exhibits dynamic changes in protoplast isolation regeneration. By recovering, cloning, sequencing, and performing BLASTn alignment analysis on specific methylation modification sites in the ponkan, 18 DNA sequences with high homology are identified which are found to be involved in various biological functions, thereby establishing a foundational basis for genetic editing in protoplasts.

Development of a Cabbage Protoplast System for Studying Hypoxia Tolerance in Brassica.

As climate change brings more heavy rainfall, cabbage, a key Brassicaceae vegetable, faces significant yield losses due to flooding-induced hypoxia stress. To identify mechanisms of flooding tolerance in cabbages, a versatile platform for genetic functional studies is needed to overcome the transformation-recalcitrant nature of cabbages. In this study, a cabbage protoplast transient expression system and a corresponding protoplast hypoxia induction protocol were developed. This protocol achieved a high yield and integrity of protoplast isolation from cabbage leaves, with a transfection efficiency exceeding 40% using optimized enzymatic conditions. To alleviate potential hypoxic influence before treatments, the W5 solution was bubbled with oxygen gas to increase dissolved oxygen levels. Several chemicals for adjusting oxygen levels and physiological oxygen-scavenging treatments were tested, including EC-Oxyrase, OxyFluor, sodium sulfite, and an oxygen absorber pack. Dual-luciferase assays showed that promoters of anaerobic respiration response genes BoADH1 and BoSUS1L were activated in cabbage protoplasts after hypoxia treatments, with the highest induction level observed after treatment with the oxygen absorber pack. In summary, the cabbage protoplast transient expression system combined with hypoxia treatment demonstrates an efficient and convenient platform. This platform can facilitate studies of gene function and molecular mechanisms associated with hypoxia responses in cabbages.

Establishment of transient and stable gene transformation systems in medicinal woody plant Acanthopanax senticosus

BackgroundTransient and stable gene transformation systems play a crucial role in elucidating gene functions and driving genetic improvement in plants. However, their application in medicinal woody plants has been hampered by inefficient procedures for isolating protoplasts and regenerating plants in vitro.ResultsEmbryogenic callus protoplast isolation and transient transformation system were successfully established. The highest yield of protoplasts was approximately 1.88 × 106 cells per gram with a viability of 90% under the combination of 1.5% cellulase and 0.2% macerozyme, with enzymatic digestion for 6 h in darkness followed by centrifugation at 400×g for 5 min. The transient transfection rate of protoplast reached 45.56% at a PEG 4000 concentration of 40%, a transfection time of 40 min, 16 h of dark incubation, a plasmid concentration of 1.5 ng μL−1, and 25 min heat shock at 45 °C. In addition, 15 Agrobacterium tumefaciens-mediated GUS-positive seedlings were obtained through the somatic embryogenetic pathway under the optimized conditions.ConclusionThis study successfully established both transient and stable genetic transformation systems, paving the way for future molecular biology research on A. senticosus.Graphical

Modern Technologies Provide New Opportunities for Somatic Hybridization in the Breeding of Woody Plants.

Advances in cell fusion technology have propelled breeding into the realm of somatic hybridization, enabling the transfer of genetic material independent of sexual reproduction. This has facilitated genome recombination both within and between species. Despite its use in plant breeding for over fifty years, somatic hybridization has been limited by cumbersome procedures, such as protoplast isolation, hybridized-cell selection and cultivation, and regeneration, particularly in woody perennial species that are difficult to regenerate. This review summarizes the development of somatic hybridization, explores the challenges and solutions associated with cell fusion technology in woody perennials, and outlines the process of protoplast regeneration. Recent advancements in genome editing and plant cell regeneration present new opportunities for applying somatic hybridization in breeding. We offer a perspective on integrating these emerging technologies to enhance somatic hybridization in woody perennial plants.

Isolation of Haustorium Protoplasts Optimized by Orthogonal Design for Transient Gene Expression in Phelipanche aegyptiaca.

The efficient protoplast transient transformation system in plants is an important tool to study gene expression, metabolic pathways, and various mutagenic parameters, but it has not been established in Phelipanche aegyptiaca. As a root parasitic weed that endangers the growth of 29 species of plants in 12 families around the world, there is still no good control method for P. aegyptiaca. Even the parasitic mechanisms of P. aegyptiaca and the related genes regulating parasitism are not yet understood. In this study, by comparing the factors related to protoplast isolation and transfection, we developed the optimal protocol for protoplast isolation and transfection in Phelipanche aegyptiaca haustorium. The optimal protoplast yield and activity were 6.2 × 106 protoplasts/g fresh weight [FW] and 87.85%, respectively, by using 0.5 mol/L mannitol, enzyme concentrations of 2.5% cellulase R-10 and 0.8% Macerozyme R-10 at 24 °C for 4 h. At the same time, transfection efficiency of protoplasts was up to 78.49% when using 30 μg plasmid, 40% polyethylene glycol (PEG) concentration, 24 °C incubation temperature, and 20 min transfection time. This is the first efficient protoplasts' isolation and transient transformation system of Phelipanche aegyptiaca haustorium, laying a foundation for future studies on the gene function and mechanisms of haustorium formation in parasitic plants.

An efficient and universal protoplast-based transient gene expression system for genome editing in Brassica crops

Protoplast-based transient gene expression system has been widely used in plant genome editing because of its simple operation and less time-consuming. In order to establish a universal protoplast-based transient transfection system for verifying activities of genome editing vectors containing targets in Brassica, we systematically optimized factors affecting protoplast isolation and transient gene expression. We established an efficient protoplast-based transient gene expression system (PTGE) in Chinese cabbage, achieving high protoplast yield of 4.9 × 105 · g−1 FW, viability over 95%, and transfection efficiency of 76%. We showed for the first time that pretreatment of protoplasts with a hypotonic MMG could significantly enhance the transfection efficiency. Furthermore, protoplasts incubated at 37 °C for 6 min improved the transfection efficiency to 86%. We also demonstrated that PTGE worked well (more than 50% transfection efficiency) in multiple Brassica species including cabbage, Pak Choi, Chinese kale, and turnip. Finally, PTGE was used for validating the activities of CRISPR/Cas9 vectors containing targets in Chinese cabbage, cabbage, and pak choi, demonstrating the broad applicability of the established PTGE for genome editing in Brassica crops.

Improved Protoplast Production Protocol for Fungal Transformations Mediated by CRISPR/Cas9 in Botrytis cinerea Non-Sporulating Isolates.

Botrytis cinerea is a necrotrophic fungus that causes considerable economic losses in commercial crops. Fungi of the genus Botrytis exhibit great morphological and genetic variability, ranging from non-sporogenic and non-infective isolates to highly virulent sporogenic ones. There is growing interest in the different isolates in terms of their methodological applications aimed at gaining a deeper understanding of the biology of these fungal species for more efficient control of the infections they cause. This article describes an improvement in the protoplast production protocol from non-sporogenic isolates, resulting in viable protoplasts with regenerating capacity. The method improvements consist of a two-day incubation period with mycelium plugs and orbital shaking. Special mention is made of our preference for the VinoTaste Pro enzyme in the KC buffer as a replacement for Glucanex, as it enhances the efficacy of protoplast isolation in B459 and B371 isolates. The methodology described here has proven to be very useful for biotechnological applications such as genetic transformations mediated by the CRISPR/Cas9 tool.

Embryogenic callus induction, proliferation, protoplast isolation, and PEG induced fusion in Camellia oleifera

Embryogenic callus induction, proliferation, protoplast isolation, and PEG induced fusion in Camellia oleifera

Establishment of an Efficient Protoplast Isolation and Transfection Method for Eucommia ulmoides Oliver.

Eucommia ulmoides Oliver is a unique high-quality natural rubber tree species and rare medicinal tree species in China. The rapid characterization of E. ulmoides gene function has been severely hampered by the limitations of genetic transformation methods and breeding cycles. The polyethylene glycol (PEG)-mediated protoplast transformation system is a multifunctional and rapid tool for the analysis of functional genes in vivo, but it has not been established in E. ulmoides. In this study, a large number of highly active protoplasts were isolated from the stems of E. ulmoides seedlings by enzymatic digestion, and green fluorescent protein expression was facilitated using a PEG-mediated method. Optimal enzymatic digestion occurred when the enzyme was digested for 10 h in an enzymatic solution containing 2.5% Cellulase R-10 (w/v), 0.6% Macerozyme R-10 (w/v), 2.5% pectinase (w/v), 0.5% hemicellulase (w/v), and 0.6 mol/L mannitol. The active protoplast yield under this condition was 1.13 × 106 protoplasts/g fresh weight, and the protoplast activity was as high as 94.84%. This study established the first protoplasm isolation and transient transformation system in hard rubber wood, which lays the foundation for subsequent functional studies of E. ulmoides genes to achieve high-throughput analysis, and provides a reference for future gene function studies of medicinal and woody plants.

Viable protoplast isolation, organelle visualization and transformation of the globally distributed plant pathogen Phytophthora cinnamomi

Phytophthora cinnamomi is an oomycete plant pathogen with a host range of almost 5000 plant species worldwide and therefore poses a serious threat to biodiversity. Omics technology has provided significant progress in our understanding of oomycete biology, however, transformation studies of Phytophthora for gene functionalisation are still in their infancy. Only a limited number of Phytophthora species have been successfully transformed and gene edited to elucidate the role of particular genes. There is a need to escalate our efforts to understand molecular processes, gene regulation and infection mechanisms of the pathogen to enable us to develop new disease management strategies. The primary obstacle hindering the advancement of transformation studies in Phytophthora is their challenging and unique nature, coupled with our limited comprehension of why they remain such an intractable system to work with. In this study, we have identified some of the key factors associated with the recalcitrant nature of P. cinnamomi. We have incorporated fluorescence microscopy and flow cytometry along with the organelle-specific dyes, fluorescein diacetate, Hoechst 33342 and MitoTracker™ Red CMXRos, to assess P. cinnamomi-derived protoplast populations. This approach has also provided valuable insights into the broader cell biology of Phytophthora. Furthermore, we have optimized the crucial steps that allow transformation of P. cinnamomi and have generated transformed isolates that express a cyan fluorescent protein, with a transformation efficiency of 19.5%. We therefore provide a platform for these methodologies to be applied for the transformation of other Phytophthora species and pave the way for future gene functionalisation studies.

Optimization of protoplast isolation and subsequent regeneration from the economically important brown alga Ecklonia cava using response surface methodology

Ecklonia cava is an edible kelp species distributed in Korea and Japan with diverse uses in ecological restoration, traditional medicine, and the pharmaceutical and abalone industries. These features make E. cava a good candidate for cellular biotechnology research, which is often dependent on protoplasts. To date, however, there have been no studies that have focused on the isolation of protoplast from E. cava. In this study, we sought to optimize the yield of protoplasts from cultured young sporophytes of E. cava using commercial enzymes, with a particular focus on identifying the key conditions for achieving high protoplast yield, including enzyme concentration, chelation pre-treatment, growth, temperature, incubation time, pH, and osmolarity. Protoplast production conditions were modeled using response surface methodology (RSM) via Box–Behnken design (BBD), and the practical utility of these conditions was experimentally verified. We found that an enzyme composition of 1.67 % cellulase RS and 4 U mL−1 alginate lyase without chelation pre-treatment, at 1570 mOsm L−1 H2O and pH 6 produced the highest protoplast yield of 4.45 ± 2.16 × 107 protoplasts g−1 fresh weight when incubated at 20 °C for 4 h using young (2-week-old) cultures. Our data revealed a strong positive correlation between growth rate and protoplast yield, thereby indicating that growth rate could serve as an index for determining the optimal timing of protoplast isolation from cultured material. The optimized protocol resulted in protoplasts capable of cell wall formation, division, and regeneration. These findings indicate the efficacy of commercial enzymes in protoplast isolation and that BBD-mediated RSM is a useful approach for the production of viable protoplasts from kelp sporophytes.

Optimized protoplast isolation and transfection with a breakpoint: accelerating Cas9/sgRNA cleavage efficiency validation in monocot and dicot

The CRISPR-Cas genome editing tools are revolutionizing agriculture and basic biology with their simplicity and precision ability to modify target genomic loci. Software-predicted guide RNAs (gRNAs) often fail to induce efficient cleavage at target loci. Many target loci are inaccessible due to complex chromatin structure. Currently, there is no suitable tool available to predict the architecture of genomic target sites and their accessibility. Hence, significant time and resources are spent on performing editing experiments with inefficient guides. Although in vitro-cleavage assay could provide a rough assessment of gRNA efficiency, it largely excludes the interference of native genomic context. Transient in-vivo testing gives a proper assessment of the cleavage ability of editing reagents in a native genomic context. Here, we developed a modified protocol that offers highly efficient protoplast isolation from rice, Arabidopsis, and chickpea, using a sucrose gradient, transfection using PEG (polyethylene glycol), and validation of single guide RNAs (sgRNAs) cleavage efficiency of CRISPR-Cas9. We have optimized various parameters for PEG-mediated protoplast transfection and achieved high transfection efficiency using our protocol in both monocots and dicots. We introduced plasmid vectors containing Cas9 and sgRNAs targeting genes in rice, Arabidopsis, and chickpea protoplasts. Using dual sgRNAs, our CRISPR-deletion strategy offers straightforward detection of genome editing success by simple agarose gel electrophoresis. Sanger sequencing of PCR products confirmed the editing efficiency of specific sgRNAs. Notably, we demonstrated that isolated protoplasts can be stored for up to 24/48 h with little loss of viability, allowing a pause between isolation and transfection. This high-efficiency protocol for protoplast isolation and transfection enables rapid (less than 7 days) validation of sgRNA cleavage efficiency before proceeding with stable transformation. The isolation and transfection method can also be utilized for rapid validation of editing strategies, evaluating diverse editing reagents, regenerating plants from transfected protoplasts, gene expression studies, protein localization and functional analysis, and other applications.

Phytosulfokine alpha enhances regeneration of transformed and untransformed protoplasts of Brassica oleracea.

Phytosulfokine-α (PSK-α) is a disulfated pentapeptide (YIYTQ) acting as an intercellular signal peptide and growth factor. It was originally isolated from conditioned medium of asparagus mesophyll cell cultures in 1996 and later characterized as a hormone-like signal molecule with important roles in numerous processes of in vivo plant growth and development. It is currently becoming a valuable mitogenic factor in plant breeding and biotechnology due to its stimulatory effect on in vitro cell elongation, proliferation and differentiation. The focus of our work was to review current knowledge about the roles of PSK-α in plant biotechnology and to evaluate its influence on the regeneration of protoplasts of four Brassica oleracea cultivars (two cauliflower and two cabbage) cultured under two distinctive protocols and with different protoplast densities. Protoplast regeneration was studied due to its high value for plant genome editing, which is generally limited by the inefficient regeneration of treated protoplasts of numerous important plant genotypes. Our hypothesis was that the stress related to PEG-mediated protoplast transformation and the following decrease in viable protoplast density in culture could be alleviated by the addition of PSK-α to the culture medium. We therefore tested whether PSK-α could increase cell division at the early stages of culture (5 and 15 days after protoplast isolation) and stimulate the formation of microcallus colonies up to the 30st day of culture and to evaluate its influence on callus organogenesis leading to shoot regeneration. The PSK-α showed a strong stimulatory effect on untransformed protoplast regeneration already during the first days of culture, accelerating cell division up to 5.3-fold and the formation of multicellular microcallus colonies up to 37.0-fold. The beneficial influence was retained at later stages of regeneration, when PSK improved shoot organogenesis even if it was present only during the first 10 days of culture. The highest numbers of shoots, however, were regenerated when PSK was present during the first days of culture and later in solid shoot regeneration medium. Finally, the addition of PSK-α to PEG-transformed protoplasts significantly enhanced their division rate and the formation of microcallus colonies in selection media, up to 44.0-fold.

Establishment of protoplasts isolation and transient transformation system for kiwifruit

Protoplast isolation and transient transformation have proven to be valuable tools for studying gene function in plants. However, these techniques are rarely utilized in most woody plants due to the lack of an efficient protoplast isolation system. In this study, we successfully established a protocol for isolating and purifying protoplasts from kiwifruit callus. First, loose kiwifruit callus was induced using young true leaves as explants on MS medium containing 0.5 mg·L−1 zeatin and 0.5 mg·L−1 2,4-dichlorophenoxyacetic acid (2,4-D), followed by propagation on medium supplemented with 1.0 mg·L−1 2,4-D + 0.5 mg·L−1 6-benzylaminopurine + 0.5 mg·L−1 1-naphthlcetic acid. Subsequently, the callus subcultured at 15 d was digested with an enzyme solution consisting of 2.0 % Cellulase R-10, 0.5 % Macerozyme R-10, and 0.7 M mannitol for 7 h in the dark to obtain protoplasts at a yield of approximately 2.8 × 106 protoplasts·g−1FW with viability reaching up to 95.2 %. Furthermore, we optimized the conditions for transient transformation in kiwifruit protoplasts, achieving an approximately 43.5 % transformation efficiency using a concentration of PEG4000 at 40 %. By employing this method, we successfully verified the subcellular localization of AcMYB6l-GFP fusion protein. In conclusion, we have successfully established an efficient protocol for protoplast isolation and transient transformation in kiwifruit, laying a foundation for future research on gene function and molecular breeding in Actinidia.

Advances in Quercus ilex L. breeding: the CRISPR/Cas9 technology via ribonucleoproteins.

The CRISPR/Cas9 ribonucleoprotein (RNP)-mediated technology represents a fascinating tool for modifying gene expression or mutagenesis as this system allows for obtaining transgene-free plants, avoiding exogenous DNA integration. Holm oak (Quercus ilex) has an important social, economic, and ecological role in the Mediterranean climate zones of Western Europe and North Africa and is severely affected by oak decline syndrome. Here we report the first example of the application of the CRISPR/Cas9-RNP technology in holm oak. Firstly, we evaluated the protoplast isolation from both in vitro leaves and proembryogenic masses. Proembryogenic masses represented the best material to get high protoplast yield (11 x 106 protoplasts/ml) and viability. Secondly, the protoplast transfection ability was evaluated through a vector expressing green fluorescence protein as marker gene of transfection, reaching a transfection percentage of 62% after 24 hours. CRISPR/Cas9 RNPs were successfully delivered into protoplasts resulting in 5.6% ± 0.5% editing efficiency at phytoene desaturase (pds) target genomic region. Protoplasts were then cultured in semisolid media and, after 45 days in culture, developed embryogenic calli were observed in a Murashige and Skoog media with half concentration of NH4NO3 and KNO3 supplemented with 0.1 mg/L benzylaminopurine and 0.1 mg/L 2,4-dichlorophenoxyacetic acid.

Efficient regeneration of protoplasts from Solanum lycopersicum cultivar Micro-Tom.

Protoplast regeneration has become a key platform for genetic and genome engineering. However, we lack reliable and reproducible methods for efficient protoplast regeneration for tomato (Solanum lycopersicum) cultivars. Here, we optimized cell and tissue culture methods for protoplast isolation, microcallus proliferation, shoot regeneration, and plantlet establishment of the tomato cultivar Micro-Tom. A thin layer of alginate was applied to protoplasts isolated from third to fourth true leaves and cultured at an optimal density of 1 × 105 protoplasts/ml. We determined the optimal culture media for protoplast proliferation, callus formation, de novo shoot regeneration, and root regeneration. Regenerated plantlets exhibited morphologically normal growth and sexual reproduction. The entire regeneration process, from protoplasts to flowering plants, was accomplished within 5 months. The optimized protoplast regeneration platform enables biotechnological applications, such as genome engineering, as well as basic research on plant regeneration in Solanaceae species.

Enhancing Protoplast Isolation and Early Cell Division from Cannabis sativa Callus Cultures via Phenylpropanoid Inhibition.

De novo regeneration of Cannabis sativa L. (cannabis) using tissue culture techniques remains unreliable and infrequent. Conventional methods for the regeneration and transformation of cannabis have not achieved the reliability and replicability that need to be integrated into research and breeding programs. Protoplast systems are effective for gene expression studies and transformation and genome-editing technologies and open the possibility of somatic hybridization to create interspecific hybrids. To date, leaf-derived protoplasts have been isolated for transient gene expression studies, but protoplast-to-plant regeneration has not been reported. The present study aims to evaluate the efficacy of using a callus culture system as an abundant tissue source for protoplast isolation and lays the groundwork for a protoplast-to-plant regeneration system. Using hypocotyl-derived callus cultures, which are known to have relatively greater regenerative potential, the efficacy of protoplast isolation and initial cell division were assessed. In this study, the effect of 2-aminoindane-2-phosphonic acid (AIP), a competitive inhibitor of phenylalanine ammonia lyase (PAL), in callus culture media and the effect of subculture frequency on protoplast yield were assessed. This study found that inclusion of AIP at 1 mM resulted in a 334% increase in protoplast yield compared with AIP-free medium, representing the first known use of AIP in cannabis tissue culture. Inclusion of AIP led to a 28% decrease in total soluble phenolics and 52% decrease in tissue browning compared with the control medium. Lastly, a two-phase culture system for protoplast regeneration was tested. At a concentration of 2.0 × 105 protoplasts per mL, cell wall reconstitution and cell division were observed, providing one of the first know reports of cell division from cannabis protoplasts and setting the stage for the future development of a protoplast-to-plant regeneration system.

Isolation of Protoplasts from Tissues of Mexican Prickly Poppy (Argemone mexicana L.): An Alkaloid-Producing Medicinal Plant.

Protoplasts are plant cells from which the pectocellulosic cell wall has been removed, thus keeping the plasma membrane intact. For plant secondary metabolites research, this system is a powerful tool to study the metabolites' dynamics inside the cells, such as the subcellular localization of proteins, characterization of gene function, transcription factors involved in metabolite pathways, protein transport machinery, and to perform single-cell omics studies. Due to its lack of a cell wall, better images of the interior of the cell can be obtained compared to the whole tissue. This allows the identification of specific cell types involved in the accumulation of specialized metabolites, such as alkaloids, given their autofluorescence properties. Here is a simplified protocol to obtain protoplasts from leaves and in vitro cell cultures from Argemone mexicana, which produces the pharmacologically important alkaloids berberine and sanguinarine.

Protoplast Isolation, Culture, and Regeneration in Common and Tartary Buckwheat.

Techniques based on the use of plant protoplasts are a convenient model for better understanding and observing developmental changes in the cells. The establishment of research tools based on protoplasts consists of many steps needed for optimization. Here, we describe the culture of morphogenic callus (MC)- and hypocotyl-derived protoplasts of common (Fagopyrum esculentum Moench) and Tartary (F. tataricum (L.) Gaertn.) buckwheat. Protoplasts embedding in agarose matrix and application of plant hormones, including phytosulfokine (PSK), enable the development of protoplast cultures and plant regeneration.

Isolation and regeneration of cell suspension-derived Foeniculum vulgare protoplasts

Hybrid development incorporating lines with cytoplasmic male sterility (CMS) has become an increasingly effecting technique for utilizing heterosis in vegetable crops. Currently, somatic hybridization has become prevalent in the Apiaceae family, which includes carrots, celery, and leeks. Therefore, as a first step, a simple and efficient protocol for isolating and regenerating protoplasts is established for the commercial fennel hybrid “Dragon” as a source of CMS that will be transferred later into carrot via protoplast fusion. To this end, cell suspensions from Dragon were initiated as a source for protoplast isolation.