Proton-coupled Electron Transfer Mechanism Research Articles

A Unified Charge Storage Mechanism to Rationalize the Electrochemical Behavior of Quinone-Based Organic Electrodes in Aqueous Rechargeable Batteries.

Due to their eco-sustainability and versatility, organic electrodes are promising candidates for large-scale energy storage in rechargeable aqueous batteries. This is notably the case of aqueous hybrid batteries that pair the low voltage of a zinc anode with the high voltage of a quinone-based (or analogue of quinone-based) organic cathode. However, the mechanisms governing their charge-discharge cycles remain poorly understood and are even a matter of debate and controversy. No consensus exists on the charge carrier in mild aqueous electrolytes, especially when working in an electrolyte containing a multivalent metal cation such as Zn2+. In this study, we comprehensively investigate the electrochemical reactivity of two model quinones, chloranil, and duroquinone, either diluted in solution or incorporated into carbon-based composite electrodes. We demonstrate that a common nine-member square scheme proton-coupled electron transfer mechanism allows us to fully describe and rationalize their electrochemical behavior in relation to the pH and chemical composition of the aqueous electrolyte. Additionally, we highlight the crucial role played by the pKas associated with the reduced states of quinones in determining the nature of the charge carrier that compensates for the negative charges reversibly injected in the active material. Finally, contrary to the widely reported findings for Zn/organic batteries, we unequivocally establish that the predominant solid-state charge carriers in Zn2+-based mild aqueous electrolytes are not multivalent Zn2+ cations but rather protons supplied by the weakly acidic hexaaqua metal ions (i.e., [Zn(H2O)6]2+]).

Mechanism of Electrocatalytic H2 Evolution, Carbonyl Hydrogenation, and Carbon-Carbon Coupling on Cu.

Aqueous-phase electrocatalytic hydrogenation of benzaldehyde on Cu leads not only to benzyl alcohol (the carbonyl hydrogenation product), but Cu also catalyzes carbon-carbon coupling to hydrobenzoin. In the absence of an organic substrate, H2 evolution proceeds via the Volmer-Tafel mechanism on Cu/C, with the Tafel step being rate-determining. In the presence of benzaldehyde, the catalyst surface is primarily covered with the organic substrate, while H* coverage is low. Mechanistically, the first H addition to the carbonyl O of an adsorbed benzaldehyde molecule leads to a surface-bound hydroxy intermediate. The hydroxy intermediate then undergoes a second and rate-determining H addition to its α-C to form benzyl alcohol. The H additions occur predominantly via the proton-coupled electron transfer mechanism. In a parallel reaction, the radical α-C of the hydroxy intermediate attacks the electrophilic carbonyl C of a physisorbed benzaldehyde molecule to form the C-C bond, which is rate-determining. The C-C coupling is accompanied by the protonation of the formed alkoxy radical intermediate, coupled with electron transfer from the surface of Cu, to form hydrobenzoin.

Triplet State Radical Chemistry: Significance of the Reaction of 3SO2 with HCOOH and HNO3.

The triplet excited states of sulfur dioxide can be accessed in the UV region and have a lifetime large enough that they can react with atmospheric trace gases. In this work, we report high level ab initio calculations for the reaction of the a3B1 and b3A2 excited states of SO2 with weak and strong acidic species such as HCOOH and HNO3, aimed to extend the chemistry reported in previous studies with nonacidic H atoms (water and alkanes). The reactions investigated in this work are very versatile and follow different kinds of mechanisms, namely, proton-coupled electron transfer (pcet) and conventional hydrogen atom transfer (hat) mechanisms. The study provides new insights into a general and very important class of excited-state-promoted reactions, opening up interesting chemical perspectives for technological applications of photoinduced H-transfer reactions. It also reveals that atmospheric triplet chemistry is more significant than previously thought.

Proton-coupled electron transfer activation of peroxydisulfate with phosphorylated zero-valent iron

Heterogeneous peroxydisulfate (PDS) activation driven by conventional electron transfer (ET) is often frustrated by low thermodynamic driving force and sluggish kinetics. Herein, we propose a proton-coupled electron transfer (PCET) strategy of PDS activation, by utilizing ball-milled phosphorylated zero-valent iron (P-ZVIbm) as a PCET platform. P-ZVIbm efficiently activated PDS to produce SO4•− and •OH for rapid degradation of 4-chlorophenol in a wide pH range of 3.5–10.5, with rate constants 3–62 times those of the ZVIbm/PDS counterpart. PCET mechanism was evidenced by the pH dependent kinetics, kinetic isotope effect, and proton inventory study. The surface-bound phosphates offer flexible pendant protons (P-O-H) through hydrogen bonds, delocalizing electrons of peroxide O to polarize the O-O bond, thereby facilitating the ET from ZVI for O-O bond cleavage. The work demonstrates the superiority of PCET strategy for heterogeneous PDS activation, and shall guide the design of high-performance Fenton-like catalysts.

Unraveling a Concerted Proton-Coupled Electron Transfer Pathway in Atomically Precise Gold Nanoclusters.

Metal nanoclusters (MNCs) represent a promising class of materials for catalytic carbon dioxide and proton reduction as well as dihydrogen oxidation. In such reactions, multiple proton-coupled electron transfer (PCET) processes are typically involved, and the current understanding of PCET mechanisms in MNCs has primarily focused on the sequential transfer mode. However, a concerted transfer pathway, i.e., concerted electron-proton transfer (CEPT), despite its potential for a higher catalytic rate and lower reaction barrier, still lacks comprehensive elucidation. Herein, we introduce an experimental paradigm to test the feasibility of the CEPT process in MNCs, by employing Au18(SR)14 (SR denotes thiolate ligand), Au22(SR)18, and Au25(SR)18- as model clusters. Detailed investigations indicate that the photoinduced PCET reactions in the designed system proceed via an CEPT pathway. Furthermore, the rate constants of gold nanoclusters (AuNCs) have been found to be correlated with both the size of the cluster and the flexibility of the Au-S framework. This newly identified PCET behavior in AuNCs is prominently different from that observed in semiconductor quantum dots and plasmonic metal nanoparticles. Our findings are of crucial importance for unveiling the catalytic mechanisms of quantum-confined metal nanomaterials and for the future rational design of more efficient catalysts.

An unexpected and robust nickel (II)-based ether-bonded homogeneous system: Effective for photocatalytic CO2-to-CO transformation in visible light

Three halogen-containing pyridine carboxylic acid ligands (6-fluoropicolinic acid, 6-chloropicolinic acid, and 6-bromopicolinic acid) were combined with nickel to form three types of complexes: Ni-O ((6,6′-oxydipicoline acid) Ni(H2O)2), Ni-(OH)2((6,6′-hydroxydipicoline acid) Ni(H2O)2) and Ni-Br2((6,6′-bromodipicoline acid) Ni(H2O)2). Interestingly, the nickel salt reacted with 6-fluoropicolinic acid to form the ether-type complex Ni-O, with 6-chloropicolinic acid to form the hydroxy-type complex Ni-(OH)2, and with 6-bromopicolinic acid to form a Ni-Br2 complex with unchanged ligands. The Ni-O and Ni-(OH)2 complexes are novel in structure and especially the Ni-O show an excellent catalytic performance on reduction of CO2 to CO. After 12 h of irradiation, the Ni-O complexes attained a CO turnover number (TON) of 5664.3 and 86.7 % selectivity. The configurations of the complex catalysts have been demonstrated to play a major role in photocatalysis, by integrating analysis of high resolution mass spectrometry (HRMS) as well as density-functional theory (DFT). A potential proton-coupled electron transfer (PCET) mechanism of two-stage photocatalytic process is proposed.

Valence Tautomerism Induced Proton Coupled Electron Transfer:X-H Bond Oxidation with a Dinuclear Au(II) Hydroxide Complex.

We report the preparation and characterization of the dinuclear AuII hydroxide complex AuII 2(L)2(OH)2 (L=N,N'-bis (2,6-dimethyl) phenylformamidinate) and study its reactivity towards weak X-H bonds. Through the interplay of kinetic analysis and computational studies, we demonstrate that the oxidation of cyclohexadiene follows a concerted proton-coupled electron transfer (cPCET) mechanism, a rare type of reactivity for Au complexes. We find that the Au-Au σ-bond undergoes polarization in the PCET event leading to an adjustment of oxidation levels for both Au centers prior to C(sp3)-H bond cleavage. We thus describe the oxidation event as a valence tautomerism-induced PCET where the basicity of one reduced Au-OH unit provides a proton acceptor and the second more oxidized Au center serves as an electron acceptor. The coordination of these events allows for unprecedented radical-type reactivity by a closed shell AuII complex.

Additive-controlled chemoselective inter-/intramolecular hydroamination via electrochemical PCET process.

Electrochemically generated amidyl radical species produced distinct inter- or intramolecular hydroamination reaction products via a proton-coupled electron transfer (PCET) mechanism. Cyclic voltammetry (CV) analysis indicated that the chemoselectivity was derived from the size of the hydrogen bond complex, which consisted of the carbamate substrate and phosphate base, and could be controlled using 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) as an additive. These results provide fundamental insights for the design of PCET-based redox reaction systems under electrochemical conditions.

Metal-free platforms for molecular thin films as high-performance supercapacitors

Oligomeric thin films of anthracene, pyrene, and naphthalene are electrochemically prepared on graphite rods for understanding enhanced supercapacitor explained through proton-coupled electron-transfer and electrical double-layer mechanism.

Synergy between Cu and Co in a Layered Double Hydroxide Enables Close to 100% Nitrate-to-Ammonia Selectivity.

Nitrate electroreduction (NO3RR) holds promise as an energy-efficient strategy for the removal of toxic nitrate to restore the natural nitrogen cycle and mitigate the adverse impacts caused by overfertilization from suboptimal agricultural practices. However, existing catalysts suffer from limited electrocatalytic activity, poor selectivity, inadequate durability, and low scalability. To address this quadrilemma, in this study, we developed a cost-effective layered double hydroxide (LDH) electrocatalyst with a lamellar structure that presents trimetallic CuCoAl active sites on the nanomaterial surface. This codoping design enabled electrochemical upcycling of nitrate into ammonia exclusively and efficiently with an onset potential at 0 V vs RHE, where the electrocatalytic process is less energy intensive and has a lower carbon footprint than conventional practices. The synergistic interaction among Cu, Co, and Al further afforded a 99.5% Faradic efficiency (FE) and a yield rate of 0.22 mol h-1 g-1 for nitrate-to-ammonia electroreduction, surpassing the performance of state-of-the-art nonprecious metal NO3RR electrocatalysts over an extended operation period. To gain insights into the origin of the catalytic performance observed on LDH, control materials were employed to elucidate the roles of Cu and Co. Cu was found to improve the NO3RR onset potential despite displaying limited FE for ammonia synthesis, while Co was discovered to suppress the formation of nitrite byproduct though requiring large overpotential. Simulated wastewater containing phosphate and sulfate, which are typically present in industrial effluents, was used to further investigate the effect of electrolytes on NO3RR. Intriguingly, the use of phosphate buffer resulted in a superior yield rate and FE for ammonia production while simultaneously inhibiting nitrite byproduct formation compared with the sulfate case. These experimental findings were supported by density functional theory (DFT) calculations, which explored the adsorption strength of nitrate adducts adjacent to coadsorbed electrolytes on the LDH surface. Additionally, the relative free energies of NO3RR species were also computed to examine the proton-coupled electron transfer (PCET) mechanism on CuCoAl LDH, shedding light on the potential-dependent step (PDS) and the exclusive selectivity for nitrate-to-ammonia conversion. The CuCoAl LDH developed here offers scalability by eliminating the need for precious metals, rendering this earth-abundant catalyst particularly appealing for sustainable nitrate electrovalorization technology.

Exceptionally high proton conductivity in Eu2O3 by proton-coupled electron transfer mechanism

Proton conductors are typically developed by doping to introduce structural defects such as oxygen vacancies to facilitate ionic transport through structural bulk conduction mechanism. In this study, we present a novel electrochemical proton injection method via an in situ fuel cell process, demonstrating proton conduction in europium oxide (Eu2O3) through a surficial conduction mechanism for the first time. By tuning Eu2O3 into a protonated form, H-Eu2O3, we achieved an exceptionally high proton conductivity of 0.16S cm-1. Distribution of relaxation time (DRT) analysis was employed to investigate the proton transport behavior and reveal the significant contribution of surface proton transport to the overall conductivity of Eu2O3. Remarkably, H-Eu2O3 exhibited a low activation energy for ionic transport, comparable to the best ceramic electrolytes available. The proton-coupled electron transfer (PCET) mechanism describes this novel surficial proton conduction mechanism. These findings provide new possibilities for developing advanced proton conductors with improved performance.

β-Scission by Direct Electrochemical Oxidation: Proton-coupled Electron Transfer Mechanism Dictated by Synthetic Study and Computations

β-Scission by Direct Electrochemical Oxidation: Proton-coupled Electron Transfer Mechanism Dictated by Synthetic Study and Computations

Cations Determine the Mechanism and Selectivity of Alkaline Oxygen Reduction Reaction on Pt(111).

The proton-coupled electron transfer (PCET) mechanism of the oxygen reduction reaction (ORR) is a long-standing enigma in electrocatalysis. Despite decades of research, the factors determining the microscopic mechanism of ORR-PCET as a function of pH, electrolyte, and electrode potential remain unresolved, even on the prototypical Pt(111) surface. Herein, we integrate advanced experiments, simulations, and theory to uncover the mechanism of the cation effects on alkaline ORR on well-defined Pt(111). We unveil a dual-cation effect where cations simultaneously determine i) the active electrode surface by controlling the formation of Pt-O and Pt-OH overlayers and ii) the competition between inner- and outer-sphere PCET steps. The cation-dependent transition from Pt-O to Pt-OH determines the ORR mechanism, activity, and selectivity. These findings provide direct evidence that the electrolyte affects the ORR mechanism and performance, with important consequences for the practical design of electrochemical systems and computational catalyst screening studies. Our work highlights the importance of complementary insight from experiments and simulations to understand how different components of the electrochemical interface contribute to electrocatalytic processes.

Concerted proton-coupled electron transfer promotes NiCoP nanowire arrays for efficient overall water splitting at industrial-level current density

Inspired by the oxygen-evolving complex (OEC) in photosystem II (PS-II), self-supported Fe-doped NiCoP nanowire arrays modified with carboxylate (NCFCP@NF) is constructed to boost industrial-level overall water splitting by the concerted proton-coupled electron transfer (c-PET) mechanism. NCFCP@NF exhibits 283 mV at the current density of 3000 mA cm−2 for HER, which is attributed to the H2O adsorption sites provided by Fe and Ni, as well as the electrons provided by carboxyl ligand. Also, NCFCP@NF shows remarkable OER catalytic activity with overpotential of 329 mV to afford 3000 mA cm−2. Herein, the introduction of Fe promotes the formation of *OOH, and carboxyl ligand accelerate the deprotonation process of OER. Furthermore, NCFCP@NF displays the ultralong durability (200 h) at 1000 mA cm−2 for overall water splitting. This study offers a new perspective on designing efficient overall water splitting catalyst at the industrial-level current density by the concerted proton-coupled electron transfer mechanism.

Electrocatalytic Hydrogen Evolution using a Nickel-based Calixpyrrole Complex: Controlling the Secondary Coordination Sphere on an Electrode Surface.

Incorporating design elements from homogeneous catalysts to construct well defined active sites on electrode surfaces is a promising approach for developing next generation electrocatalysts for energy conversion reactions. Furthermore, if functionalities that control the electrode microenvironment could be integrated into these active sites it would be particularly appealing. In this context, a square planar nickel calixpyrrole complex, Ni(DPMDA) (DPMDA=2,2'-((diphenylmethylene)bis(1H-pyrrole-5,2-diyl))bis(methaneylylidene))bis(azaneylylidene))dianiline) with pendant amine groups is reported that forms a heterogeneous hydrogen evolution catalyst using anilinium tetrafluoroborate as the proton source. The supported Ni(DPMDA) catalyst was surprisingly stable and displayed fast reaction kinetics with turnover frequencies (TOF) up to 25,900 s-1 or 366,000 s-1 cm-2 . Kinetic isotope effect (KIE) studies revealed a KIE of 5.7, and this data, combined with Tafel slope analysis, suggested that a proton-coupled electron transfer (PCET) process involving the pendant amine groups was rate-limiting. While evidence of an outer-sphere reduction of the Ni(DPMDA) catalyst was observed, it is hypothesized that the control over the secondary coordination sphere provided by the pendant amines facilitated such high TOFs and enabled the PCET mechanism. The results reported herein provide insight into heterogeneous catalyst design and approaches for controlling the secondary coordination sphere on electrode surfaces.

Reactions of a hydrogen atom with haloacetates in aqueous solutions: Computational evidence for proton-coupled electron transfer and competing mechanisms.

A computational study of the mechanisms and kinetics of the aqueous reactions of a hydrogen atom with haloacetates is presented. Several mechanisms in the close competition are observed, such as proton-coupled electron transfer (PCET), hydrogen atom transfer (HAT), and halogen abstraction (XA). Computations predict that dechlorination takes place via PCET mechanisms and not via XA, as stated earlier, while XA is the fastest mechanism for . The reaction rate constants are reasonably well predicted within the theoretically most reliable canonical variational transition state theory with small curvature tunneling corrections and compared with the experimental ones. To reproduce the experimental rate constants of the debromination process it is necessary to include the PCET and XA cumulative values. Small curvature tunneling corrections to the rate constants are the highest for HAT and PCET mechanisms, up to 70 times larger than the Wigner, while variational effects for XA mechanisms are very small.

Hydrocarbon Oxidation by a Porphyrin-π-Cation Radical Complex.

Heme and chlorin π-cation radical oxidants are widely implicated in biological and synthetic oxidation catalysis. Little insight into the role of π-cation radicals in proton coupled electron transfer (PCET) oxidation is available. We prepared a NiII-porphyrin-π-cation complex ([NiII(P•+)]) and found it to be capable of the oxidation of a variety of simple hydrocarbon substrates. Interestingly, some of the products were hydroxylated, with ([NiII(P•+)]) working in concert with atmospheric O2 to yield hydroxylated hydrocarbons. Kinetic data suggested that the porphyrin-π-cation radical species oxidised substrates via a concerted PCET mechanism, where the nickel porphyrin-π-cation radical accepted the electron, and the proton was transferred to a free anion. Our findings highlight the potential role of π-cation radicals as hydrocarbon activators, demonstrating that porphyrin ligand non-innocence could be a readily manipulated resource for oxidation catalyst development.

Hydrocarbon Oxidation by a Porphyrin‐π‐Cation Radical Complex

AbstractHeme and chlorin π‐cation radical oxidants are widely implicated in biological and synthetic oxidation catalysis. Little insight into the role of π‐cation radicals in proton coupled electron transfer (PCET) oxidation is available. We prepared a NiII‐porphyrin‐π‐cation complex ([NiII(P⋅+)]) and found it to be capable of the oxidation of a variety of simple hydrocarbon substrates. Interestingly, some of the products were hydroxylated, with ([NiII(P⋅+)]) working in concert with atmospheric O2 to yield hydroxylated hydrocarbons. Kinetic data suggested that the porphyrin‐π‐cation radical species oxidised substrates through a concerted PCET mechanism, where the porphyrin‐π‐cation radical accepted the electron, and the proton was transferred to a free anion. Our findings highlight the potential role of π‐cation radicals as hydrocarbon activators, demonstrating that porphyrin ligand non‐innocence could be a readily manipulated resource for oxidation catalyst development.

Tyrosine residues initiated photopolymerization in living organisms

Towards intracellular engineering of living organisms, the development of new biocompatible polymerization system applicable for an intrinsically non-natural macromolecules synthesis for modulating living organism function/behavior is a key step. Herein, we find that the tyrosine residues in the cofactor-free proteins can be employed to mediate controlled radical polymerization under 405 nm light. A proton-coupled electron transfer (PCET) mechanism between the excited-state TyrOH* residue in proteins and the monomer or the chain transfer agent is confirmed. By using Tyr-containing proteins, a wide range of well-defined polymers are successfully generated. Especially, the developed photopolymerization system shows good biocompatibility, which can achieve in-situ extracellular polymerization from the surface of yeast cells for agglutination/anti-agglutination functional manipulation or intracellular polymerization inside yeast cells, respectively. Besides providing a universal aqueous photopolymerization system, this study should contribute a new way to generate various non-natural polymers in vitro or in vivo to engineer living organism functions and behaviours.

Choice of Electrolyte Impacts the Selectivity of Proton-Coupled Electrochemical Reactions on Hydrogen Titanate

Proton-coupled electron transfer (PCET) reactions involving transition metal oxides are prevalent in aqueous electrochemical systems used for energy storage and conversion. Here, we elucidate the role of electrolyte on PCET mechanisms in transition metal oxides in aqueous acidic electrolytes using layered hydrogen titanate (H2Ti3O7) as an example. We identify three processes by which electrolyte protons interact with hydrogen titanate at the electrochemical interface: (1) adsorption at the surface and/or insertion into the bulk, (2) adsorption as part of the hydrogen evolution reaction (HER) at the surface, and (3) dissolution of the hydrogen titanate. We utilize a combined experimental and computational (ReaxFF) approach to probe how the competition for protons and electrons among these processes influences electrochemical properties, including the energy storage, Coulombic efficiency (CE), rate capability, and lifetime. In an acidic buffered electrolyte (1 M H3PO4), the CE increases from an average of 48% to 71% and the specific capacity increases from 83 to 90 mAh g–1 as compared to a strong acid electrolyte (1 M H2SO4). We propose that H3PO4 mitigates the HER and hydrogen titanate dissolution, thereby increasing the operating potential window for proton adsorption/insertion for charge storage in hydrogen titanate. Material characterization and computational results indicate that adsorption of phosphate species onto the surface of hydrogen titanate may decrease its dissolution upon reduction, thereby improving electrode performance. We offer a preliminary solution to improve energy storage performance via electrolyte tuning by decreasing the prevalence of the HER and electrode dissolution.