Proteomic Sample Preparation Research Articles

Development of an Automated, Ultra-Rapid Bottom-Up Proteomics Workflow Utilizing Alginate-Based Hydrogels.

A new approach to sample preparation and enzymatic digestion in bottom-up proteomics has been developed using alginate-based hydrogel entrapment of enzymes. This hydrogel facilitates rapid and room-temperature digestions with multienzyme capabilities. Three methodologies were tested: within microcentrifuge tubes, in situ pipette tips, and automated robotic liquid handling. Factorial experimental design identified a 1 h, room temperature, pepsin-trypsin dual-enzyme digestion as optimal for sequence coverage and protein group identification, comparable to a gold-standard overnight proteomic protocol. This method promises significant advancements in proteomic analysis by enhancing reusability, speed, throughput, convenience, and cost-effectiveness, without hindering digestion efficiency.

Recent Advancements in Proteomic Sample Preparation from Recombinant Chinese Hamster Ovary Cells.

Chinese hamster ovary (CHO) cells are the most commonly used mammalian host cell line for biopharmaceutical production because of their ability to correctly fold and post-translationally modify recombinant proteins that are compatible with human use. Proteomics, along with other "omic platforms," are being used to understand the biology of CHO cells with the ultimate aim to enhance CHO cell factories for more efficient production of biopharmaceuticals. Liquid chromatography-mass spectrometry (LC-MS) for proteomic analysis has become the standard technique for profiling proteomes. There are three stages to a typical bottom-up approach, namely, sample preparation, LC-MS/MS, and data analysis. Although there have been major advances in LC-MS/MS instrumentation and data analysis tools, sample preparation is still the crucial stage that affects the overall efficiency of any proteomic study. In this chapter, we present a comparison of a number of widely used sample preparation methods for proteomic applications, including in-solution digestion and commercially available device-based kits. All methods performed well; however, each method has inherent advantages and disadvantages.

Influence of different sample preparation approaches on proteoform identification by top-down proteomics.

Top-down proteomics using mass spectrometry facilitates the identification of intact proteoforms, that is, all molecular forms of proteins. Multiple past advances have lead to the development of numerous sample preparation workflows. Here we systematically investigated the influence of different sample preparation steps on proteoform and protein identifications, including cell lysis, reduction and alkylation, proteoform enrichment, purification and fractionation. We found that all steps in sample preparation influence the subset of proteoforms identified (for example, their number, confidence, physicochemical properties and artificially generated modifications). The various sample preparation strategies resulted in complementary identifications, substantially increasing the proteome coverage. Overall, we identified 13,975 proteoforms from 2,720 proteins of human Caco-2 cells. The results presented can serve as suggestions for designing and adapting top-down proteomics sample preparation strategies to particular research questions. Moreover, we expect that the sampling bias and modifications identified at the intact protein level will also be useful in improving bottom-up proteomics approaches.

Evaluation of Serum Proteome Sample Preparation Methods to Support Clinical Proteomics Applications.

Serum contains several proteins that are associated with disease-related processes. Mass spectrometry (MS)-based proteomics approaches greatly facilitate serum protein biomarker development. However, the serum proteome complexity presents a technical challenge for the accurate, sensitive, and reproducible quantification of proteins by MS. Thus, efficient sample preparation methods are of critical importance for serum proteome analyses. In this study, we evaluated the technical performance of two serum proteome sample preparation methods using sera from patients with high-grade serous ovarian cancer and patients with benign nongynecological conditions with a goal of providing insight into their compatibility with clinical proteomics workflows. One method entailed the use of immobilized trypsin (SMART Digest Trypsin) with RapiGest SF, an acid-labile surfactant designed to enhance the in-solution enzymatic digestion of proteins. The other method incorporated a commercially available sample preparation kit, iST-BCT, which contains standardized reagents. Significantly higher protein sequence coverage, albeit with lower digestion efficiency, was obtained with the immobilized trypsin + RapiGest SF workflow, whereas the iST-BCT workflow was quicker and had marginally better reproducibility. Protein relative abundance analysis revealed that the serum proteomes clustered primarily by the sample processing workflow and secondarily by disease state. We conducted a time course study to determine whether differences in the relative abundance of diagnostic high-grade serous ovarian cancer serum protein biomarker candidates were biased according to the duration of enzymatic digestion. Our results highlight the importance of optimizing enzymatic digestion kinetics according to the peptide targets of interest while considering the sensitivity of the downstream analytical method utilized in clinical proteomics workflows designed to measure biomarkers.

ZASP: A Highly Compatible and Sensitive ZnCl2 Precipitation-Assisted Sample Preparation Method for Proteomic Analysis

Universal sample preparation for proteomic analysis that enables unbiased protein manipulation, flexible reagent use, and low protein loss is required to ensure the highest sensitivity of downstream liquid chromatography-mass spectrometry (LC-MS) analysis. To address these needs, we developed a ZnCl2 precipitation-assisted sample preparation method (ZASP) that depletes harsh detergents and impurities in protein solutions prior to trypsin digestion via 10 min of ZnCl2 and methanol-induced protein precipitation at room temperature (RT). ZASP can remove trypsin digestion and LC-MS incompatible detergents such as SDS, Triton X-100, and urea at high concentrations in solution and unbiasedly recover proteins independent of the amount of protein input. We demonstrated the sensitivity and reproducibility of ZASP in an analysis of samples with 1 μg to 1000 μg of proteins. Compared to commonly used sample preparation methods such as SDC-based in-solution digestion, acetone precipitation, FASP, and SP3, ZASP has proven to be an efficient approach. Here, we present ZASP, a practical, robust, and cost-effective proteomic sample preparation method that can be applied to profile different types of samples.

Digital Microfluidics for Sample Preparation in Low-Input Proteomics.

Low-input proteomics, also referred to as micro- or nanoproteomics, has become increasingly popular as it allows one to elucidate molecular processes in rare biological materials. A major prerequisite for the analytics of minute protein amounts, e.g., derived from low cell numbers, down to single cells, is the availability of efficient sample preparation methods. Digital microfluidics (DMF), a technology allowing the handling and manipulation of low liquid volumes, has recently been shown to be a powerful and versatile tool to address the challenges in low-input proteomics. Here, an overview is provided on recent advances in proteomics sample preparation using DMF. In particular, the capability of DMF to isolate proteomes from cells and small model organisms, and to perform all necessary chemical sample preparation steps, such as protein denaturation and proteolytic digestion on-chip, are highlighted. Additionally, major prerequisites to making these steps compatible with follow-up analytical methods such as liquid chromatography-mass spectrometry will be discussed.

A single-sample workflow for joint metabolomic and proteomic analysis of clinical specimens

Understanding the interplay of the proteome and the metabolome helps to understand cellular regulation and response. To enable robust inferences from such multi-omics analyses, we introduced and evaluated a workflow for combined proteome and metabolome analysis starting from a single sample. Specifically, we integrated established and individually optimized protocols for metabolomic and proteomic profiling (EtOH/MTBE and autoSP3, respectively) into a unified workflow (termed MTBE-SP3), and took advantage of the fact that the protein residue of the metabolomic sample can be used as a direct input for proteome analysis. We particularly evaluated the performance of proteome analysis in MTBE-SP3, and demonstrated equivalence of proteome profiles irrespective of prior metabolite extraction. In addition, MTBE-SP3 combines the advantages of EtOH/MTBE and autoSP3 for semi-automated metabolite extraction and fully automated proteome sample preparation, respectively, thus advancing standardization and scalability for large-scale studies. We showed that MTBE-SP3 can be applied to various biological matrices (FFPE tissue, fresh-frozen tissue, plasma, serum and cells) to enable implementation in a variety of clinical settings. To demonstrate applicability, we applied MTBE-SP3 and autoSP3 to a lung adenocarcinoma cohort showing consistent proteomic alterations between tumour and non-tumour adjacent tissue independent of the method used. Integration with metabolomic data obtained from the same samples revealed mitochondrial dysfunction in tumour tissue through deregulation of OGDH, SDH family enzymes and PKM. In summary, MTBE-SP3 enables the facile and reliable parallel measurement of proteins and metabolites obtained from the same sample, benefiting from reduced sample variation and input amount. This workflow is particularly applicable for studies with limited sample availability and offers the potential to enhance the integration of metabolomic and proteomic datasets.Graphical

Development of an efficient, effective, and economical technology for proteome analysis

We present an efficient, effective, and economical approach, named E3technology, for proteomics sample preparation. By immobilizing silica microparticles into the polytetrafluoroethylene matrix, we develop a robust membrane medium, which could serve as a reliable platform to generate proteomics-friendly samples in a rapid and low-cost fashion. We benchmark its performance using different formats and demonstrate them with a variety of sample types of varied complexity, quantity, and volume. Our data suggest that E3technology provides proteome-wide identification and quantitation performance equivalent or superior to many existing methods. We further propose an enhanced single-vessel approach, named E4technology, which performs on-filter in-cell digestion with minimal sample loss and high sensitivity, enabling low-input and low-cell proteomics. Lastly, we utilized the above technologies to investigate RNA-binding proteins and profile the intact bacterial cell proteome.

Increasing protein identifications in bottom-up proteomics of T. castaneum − Exploiting synergies of protein biochemistry and bioinformatics

Depending on the respective research question, LC-MS/MS based bottom-up proteomics poses challenges from the initial biological sample all the way to data evaluation. The focus of this study was to investigate the influence of sample preparation techniques and data analysis parameters on protein identification in Tribolium castaneum by applying free software proteomics platform Max Quant.Multidimensional protein extraction strategies in combination with electrophoretic or chromatographic off-line protein pre-fractionation were applied to enhance the spectrum of isolated proteins from T. castaneum and reduce the effect of co-elution and ion suppression effects during nano-LC-MS/MS measurements of peptides. For comprehensive data analysis, MaxQuant was used for protein identification and R for data evaluation. A wide range of parameters were evaluated to gain reproducible, reliable, and significant protein identifications.A simple phosphate buffer, pH 8, containing protease and phosphatase inhibitor cocktail and application of gentle extraction conditions were used as a first extraction step for T.castaneum proteins. Furthermore, a two-dimensional extraction procedure in combination with electrophoretic pre-fractionation of extracted proteins and subsequent in-gel digest resulted in almost 100% increase of identified proteins when compared to chromatographic fractionation as well as one-pot-analysis. The additionally identified proteins could be assigned to new molecular functions or cell compartments, emphasizing the positive effect of extended sample preparation in bottom-up proteomics. Besides the number of peptides during post-processing, MaxQuant’s Match between Runs exhibited a crucial effect on the number of identified proteins. A maximum relative standard deviation of 2% must be considered for the data analysis.Our work with Tribolium castaneum larvae demonstrates that sometimes – depending on matrix and research question − more complex and time-consuming sample preparation can be advantageous for isolation and identification of additional proteins in bottom-up proteomics.

Establishing Quality Control Metrics for Large-Scale Plasma Proteomic Sample Preparation.

Large-scale plasma proteomics studies have been transformed due to the multiplexing and automation of sample preparation workflows. However, these workflows can suffer from reproducibility issues, a lack of standardized quality control (QC) metrics, and the assessment of variation before liquid chromatography-tandem mass spectrometry (LC-MS/MS) analysis. The incorporation of robust QC metrics in sample preparation workflows ensures better reproducibility, lower assay variation, and better-informed decisions for troubleshooting. Our laboratory conducted a plasma proteomics study of a cohort of patient samples (N = 808) using tandem mass tag (TMT) 16-plex batches (N = 58). The proteomic workflow consisted of protein depletion, protein digestion, TMT labeling, and fractionation. Five QC sample types (QCstd, QCdig, QCpool, QCTMT, and QCBSA) were created to measure the performance of sample preparation prior to the final LC-MS/MS analysis. We measured <10% CV for individual sample preparation steps in the proteomic workflow based on data from various QC sample steps. The establishment of robust measures for QC of sample preparation steps allowed for greater confidence in prepared samples for subsequent LC-MS/MS analysis. This study also provides recommendations for standardized QC metrics that can assist with future large-scale cohort sample preparation workflows.

A Comparison of Bottom-Up Proteomic Sample Preparation Methods for the Human Parasite Trichomonas vaginalis.

Bottom-up proteomic approaches depend on the efficient digestion of proteins into peptides for mass spectrometric analysis. Sample preparation strategies, based on magnetic beads, filter-aided systems, or in-solution digests, are commonly used for proteomic analysis. Time-intensive methods like filter-aided sample preparation (FASP) have led to the development of new, more time-efficient filter-based strategies like suspension trappings (S-Traps) or magnetic bead-based strategies like SP3. S-Traps have been reported as an alternative proteomic sample preparation method as they allow for high sodium dodecyl sulfate (SDS) concentrations to be present in the sample. In this study, we compare the efficiency of different protocols for FASP, SP3, and S-Trap-based digestion of proteins after extraction from Trichomonas vaginalis. Overall, we found a high number of protein IDs for all tested methods and a high degree of reproducibility within each method type. However, FASP with a 3 kDa cutoff filter unit outperformed the other methods analyzed, referring to the number of protein IDs. This is the first work providing the direct comparison of four different bottom-up proteomic approaches regarding the most efficient proteomic sample preparation protocol for the human parasite T. vaginalis.

Successive Protein Extraction Using Hydroxylamine to Increase the Depth of Proteome Coverage in Fresh, Forensic, and Archaeological Bones.

Proteomics is continually being applied to a wider range of applications, now including the analysis of archaeological samples and anatomical specimens, particularly collagen-containing tissues such as bones and teeth. Here, we present the application of a chemical digestion-based proteomics sample preparation protocol to the analysis of fresh, anatomical, and archaeological samples. We describe and discuss two protocols: one that uses hydroxylamine as an additional step of the proteomic workflow, applied to the insoluble fraction, and another that applies hydroxylamine directly on demineralized bones and teeth. We demonstrate the additional information that can be extracted using both protocols, including an increase in the sequence coverage and number of peptides detected in modern and archaeological samples and an increase in the number of proteins identified in archaeological samples. By targeting research related to collagens or extracellular matrix proteins, the use of this protocol will open new insights, considering both fresh and ancient mineralized samples.

High-throughput drug target discovery using a fully automated proteomics sample preparation platform.

Drug development is plagued by inefficiency and high costs due to issues such as inadequate drug efficacy and unexpected toxicity. Mass spectrometry (MS)-based proteomics, particularly isobaric quantitative proteomics, offers a solution to unveil resistance mechanisms and unforeseen side effects related to off-targeting pathways. Thermal proteome profiling (TPP) has gained popularity for drug target identification at the proteome scale. However, it involves experiments with multiple temperature points, resulting in numerous samples and considerable variability in large-scale TPP analysis. We propose a high-throughput drug target discovery workflow that integrates single-temperature TPP, a fully automated proteomics sample preparation platform (autoSISPROT), and data independent acquisition (DIA) quantification. The autoSISPROT platform enables the simultaneous processing of 96 samples in less than 2.5 hours, achieving protein digestion, desalting, and optional TMT labeling (requires an additional 1 hour) with 96-channel all-in-tip operations. The results demonstrated excellent sample preparation performance with >94% digestion efficiency, >98% TMT labeling efficiency, and >0.9 intra- and inter-batch Pearson correlation coefficients. By automatically processing 87 samples, we identified both known targets and potential off-targets of 20 kinase inhibitors, affording over a 10-fold improvement in throughput compared to classical TPP. This fully automated workflow offers a high-throughput solution for proteomics sample preparation and drug target/off-target identification.

A Fast-Tracking Sample Preparation Protocol for Proteomics of Formalin-Fixed Paraffin-Embedded Tumor Tissues.

Archived tumor specimens are routinely preserved by formalin fixation and paraffin embedding. Despite the conventional wisdom that proteomics might be ineffective due to the cross-linking and pre-analytical variables, these samples have utility for both discovery and targeted proteomics. Building on this capability, proteomics approaches can be used to maximize our understanding of cancer biology and clinical relevance by studying preserved tumor tissues annotated with the patients' medical histories. Proteomics of formalin-fixed paraffin-embedded (FFPE) tissues also integrates with histological evaluation and molecular pathology strategies, so that additional collection of research biopsies or resected tumor aliquots is not needed. The acquisition of data from the same tumor sample also overcomes concerns about biological variation between samples due to intratumoral heterogeneity. However, the protein extraction and proteomics sample preparation from FFPE samples can be onerous, particularly for small (i.e., limited or precious) samples. Therefore, we provide a protocol for a recently introduced kit-based EasyPep method with benchmarking against a modified version of the well-established filter-aided sample preparation strategy using laser-capture microdissected lung adenocarcinoma tissues from a genetically engineered mouse model. This model system allows control over the tumor preparation and pre-analytical variables while also supporting the development of methods for spatial proteomics to examine intratumoral heterogeneity. Data are posted in ProteomeXchange (PXD045879).

Efficient and Sensitive Sample Preparation, Separations, and Data Acquisition for Label-Free Single-Cell Proteomics.

We describe a sensitive and efficient workflow for label-free single-cell proteomics that spans sample preparation, liquid chromatography separations, and mass spectrometry data acquisition. The Tecan Uno Single Cell Dispenser provides rapid cell isolation and nanoliter-volume reagent dispensing within 384-well PCR plates. A newly developed sample processing workflow achieves cell lysis, protein denaturation, and digestion in 1h with a single reagent dispensing step. Low-flow liquid chromatography coupled with wide-window data-dependent acquisition results in the quantification of nearly 3000 proteins per cell using an Orbitrap Exploris 480 mass spectrometer. This approach greatly broadens accessibility to sensitive single-cell proteome profiling for nonspecialist laboratories.

Quantifying mitochondrial protein import by mePRODmt proteomics.

Mitochondrial protein import is crucial for maintaining cellular health and homeostasis. Disruptions in this process have been linked to various diseases. Traditional methods for studying mitochondrial protein import predominantly focus on individual proteins and lack the dynamic resolution needed to fully appreciate the complexity of mitochondrial proteostasis and protein trafficking. To address these limitations, we developed a technique called mitochondria-specific multiplexed enhanced protein dynamics (mePRODmt). This method is a novel application of the mePROD methodology and utilizes pulsed stable isotope labeling with amino acids in cell culture (pSILAC)-based proteomics approach to study transient mitochondrial protein import. This chapter outlines the mePRODmt protocol, which includes the preparation of heavy SILAC-labeled peptides for boosting overall mitochondrial peptide signals (booster), SILAC labeling of cultured cells under experimental conditions, mitochondria isolation, sample preparation for multiplex proteomics using tandem mass tags (TMT) for isobaric labeling, recommended liquid chromatography-mass spectrometry (LC-MS) settings for reporter ion quantitation and a data analysis pipeline to analyze pSILAC-TMT data.

Label-Free Sample Preparation for Single-Cell Proteomics.

In recent years, single-cell proteomics (SCP) has become a valuable addition to other single-cell omics technologies for studying cellular heterogeneity. The amount of protein in a single cell is very limited, and in contrast to sequencing techniques, there are currently no means for protein amplification. Therefore, most single-cell proteomics approaches aim to maximize sample preparation efficiency while minimizing peptide loss. By reducing processing volumes to sub-microliters and avoiding manual transfer steps that could lead to peptide loss, peptide recovery, and the robustness of SCP workflows have been significantly improved. In this chapter, we describe a protocol for label-free SCP sample preparation using the cellenONE® platform and the proteoCHIP LF 48 substrate prior to analysis with high-performance liquid chromatography-mass spectrometry.

Proteomic Identification and Label-Free Quantification of Proteins Implicated in Neurite and Spine Formation.

The molecular mechanisms underlying neurite formation include multiple crosstalk between pathways such as membrane trafficking, intracellular signaling, and actin cytoskeletal rearrangement. To study the proteins involved in such complex pathways, we present a detailed workflow of the sample preparation for mass spectrometry-based proteomics and data analysis. We have also included steps to perform label-free quantification of proteins that will help researchers quantify changes in the expression levels of key regulators of neuronal morphogenesis on a global scale.

Chloroform/Methanol Protein Extraction and In-solution Trypsin Digestion Protocol for Bottom-up Proteomics Analysis.

Bottom-up proteomics utilizes sample preparation techniques to enzymatically digest proteins, thereby generating identifiable and quantifiable peptides. Proteomics integrates with other omics methodologies, such as genomics and transcriptomics, to elucidate biomarkers associated with diseases and responses to drug or biologics treatment. The methodologies employed for preparing proteomic samples for mass spectrometry analysis exhibit variability across several factors, including the composition of lysis buffer detergents, homogenization techniques, protein extraction and precipitation methodologies, alkylation strategies, and the selection of digestion enzymes. The general workflow for bottom-up proteomics consists of sample preparation, mass spectrometric data acquisition (LC-MS/MS analysis), and subsequent downstream data analysis including protein quantification and differential expression analysis. Sample preparation poses a persistent challenge due to issues such as low reproducibility and inherent procedure complexities. Herein, we have developed a validated chloroform/methanol sample preparation protocol to obtain reproducible peptide mixtures from both rodent tissue and human cell line samples for bottom-up proteomics analysis. The protocol we established may facilitate the standardization of bottom-up proteomics workflows, thereby enhancing the acquisition of reliable biologically and/or clinically relevant proteomic data. Key features • Tissue/cell pellet sample preparation for bottom-up proteomics. • Chloroform/methanol protein extraction from murine tissue samples. • In-solution trypsin digestion proteomics workflow.

Dissecting phospho-motif-dependent Shc1 interactome using long synthetic protein fragments.

Activated receptor tyrosine kinases (RTKs) rely on the assembly of signaling proteins into high-dimensional protein complexes for signal transduction. Shc1, a prototypical scaffold protein, plays a pivotal role in directing phosphotyrosine (pY)-dependent protein complex formation for numerous RTKs typically through its two pY-binding domains. The three conserved pY sites within its CH1 region (Shc1CH1) hold particular significance due to their substantial contribution to its functions. However, how Shc1 differentially utilizes these sites to precisely coordinate protein complex assembly remains unclear. Here, we employed multiple peptide ligation techniques to synthesize an array of long protein fragments (107 amino acids) covering a significant portion of the Shc1CH1 region with varying phosphorylation states at residues Y239, 240, 313, and S335. By combining these phospho-Shc1CH1 fragments with integrated proteomics sample preparation and quantitative proteomic analysis, we were able to comprehensively resolve the site-specific interactomes of Shc1 with single amino acid resolution. By applying this approach to different cancer cell lines, we demonstrated that these phospho-Shc1CH1 fragments can be effectively used as a diagnostic tool to assess cell type-specific RTK signaling networks. Collectively, these biochemical conclusions help to better understand the sophisticated organization of pY-dependent Shc1 adaptor protein complexes and their functional roles in cancer.