Proteinaceous Polymers Research Articles

Helical superstructures between amyloid and collagen in cardiac fibrils from a patient with AL amyloidosis

Systemic light chain (LC) amyloidosis (AL) is a disease where organs are damaged by an overload of a misfolded patient-specific antibody-derived LC, secreted by an abnormal B cell clone. The high LC concentration in the blood leads to amyloid deposition at organ sites. Indeed, cryogenic electron microscopy (cryo-EM) has revealed unique amyloid folds for heart-derived fibrils taken from different patients. Here, we present the cryo-EM structure of heart-derived AL amyloid (AL59) from another patient with severe cardiac involvement. The double-layered structure displays a u-shaped core that is closed by a β-arc lid and extended by a straight tail. Noteworthy, the fibril harbours an extended constant domain fragment, thus ruling out the variable domain as sole amyloid building block. Surprisingly, the fibrils were abundantly concatenated with a proteinaceous polymer, here identified as collagen VI (COLVI) by immuno-electron microscopy (IEM) and mass-spectrometry. Cryogenic electron tomography (cryo-ET) showed how COLVI wraps around the amyloid forming a helical superstructure, likely stabilizing and protecting the fibrils from clearance. Thus, here we report structural evidence of interactions between amyloid and collagen, potentially signifying a distinct pathophysiological mechanism of amyloid deposits.

Cerebrospinal fluid-contacting neurons: multimodal cells with diverse roles in the CNS.

The cerebrospinal fluid (CSF) is a complex solution that circulates around the CNS, and whose composition changes as a function of an animal's physiological state. Ciliated neurons that are bathed in the CSF - and thus referred to as CSF-contacting neurons (CSF-cNs) - are unusual polymodal interoceptive neurons. As chemoreceptors, CSF-cNs respond to variations in pH and osmolarity and to bacterial metabolites in the CSF. Their activation during infections of the CNS results in secretion of compounds to enhance host survival. As mechanosensory neurons, CSF-cNs operate together with an extracellular proteinaceous polymer known as the Reissner fibre to detect compression during spinal curvature. Once activated, CSF-cNs inhibit motor neurons, premotor excitatory neurons and command neurons to enhance movement speed and stabilize posture. At longer timescales, CSF-cNs instruct morphogenesis throughout life via the release of neuropeptides that act over long distances on skeletal muscle. Finally, recent evidence suggests that mouse CSF-cNs may act as neural stem cells in the spinal cord, inspiring new paths of investigation for repair after injury.

Polymodal sensory integration at the interface with the cerebrospinal fluid

The cerebrospinal fluid is the site of a sensory interface that allows interactions between the nervous system and cellular targets throughout the body. Sensory neurons in contact with the cerebrospinal fluid in the spinal cord respond to changes of its composition, in particular in the context of bacterial infections of the central nervous system. These cerebrospinal fluid-contacting neurons also form an axial mechanosensory system that detects spinal curvature through the coupling with a long a proteinaceous polymer under tension in the central canal called the Reissner fiber. Activated by compression of the body axis, neurons contacting the cerebrospinal fluid modulate motor circuits to increase the speed of movement and to stabilize posture. During development and aging, this sensory system aligns the body axis and spine via the release of peptides of the urotensin family that act at long range on their receptors expressed in skeletal muscles.

Polyurethane/halloysite nano tubes/sericin based electrospun nanocomposite for sustained drug release

In this study, the feasibility of the production of electrospun nanofibre composite mainly for biomedical applications is reported. Biocompatible polyether-based polyurethane, natural proteinaceous polymer silk sericin (SS) and natural inorganic nanoclay halloysite as a drug carrier with a model drug chlorhexidine acetate were used to produce nanofibres by electrospinning technique. Sericin was extracted from Bombyx mori silk cocoons by high pressure high temperature (HT-HP) degumming. Chlorhexidine acetate (CA), an antimicrobial agent, was loaded into halloysite nanotubes (HNTs) at different weight ratios, and 1:1 weight ratio showed the maximum loading which was confirmed by TGA and XRD analysis. Electrospinning of polymer solution with different compositions of polyurethane, sericin, CA and CA-HNTs was conducted at 10% w/v concentration, 20 kV voltage, 15 μl min−1 flow rate and 10 cm distance which resulted in the formation of bead-free uniform fibres. Antimicrobial activity of nanofibrous webs was evaluated by the disc diffusion method (AATCC 90) and it was found that CA and CA-HNT loaded nanofibres show sustained antibacterial action against both the Gram-positive (S. aureus) and Gram-negative (E. coli) bacteria. The CA-HNT and sericin/CA-HNT loaded nanofibres showed controlled release of CA. In addition, the cytocompatibility assessment of developed nanofibrous composites showed good biocompatibility. Hence the produced composite nanofibre can serve as an excellent material for sustained drug release for various biomedical applications.

A Small Non-Coding RNA Modulates Expression of Pilus-1 Type in Streptococcus pneumoniae.

Streptococcus pneumoniae is a major cause of morbidity and mortality worldwide, and about 30% of the pneumococcal clinical isolates show type I pili-like structures. These long proteinaceous polymers extending from the bacterial surface are encoded by pilus islet 1 and play major roles in adhesion and host colonization. Pili expression is bistable and is controlled by the transcriptional activator RlrA. In this work, we demonstrate that the previously identified small noncoding RNA srn135 also participates in pilus regulation. Our findings show that srn135 is generated upon processing of the 5′-UTR region of rrgA messenger and its deletion prevents the synthesis of RrgA, the main pili adhesin. Moreover, overexpression of srn135 increases the expression of all pili genes and rises the percentage of piliated bacteria within a clonal population. This regulation is mediated by the stabilization of rlrA mRNA since higher levels of srn135 increase its half-life to 165%. Our findings suggest that srn135 has a dual role in pilus expression acting both in cis- (on the RrgA levels) and in trans- (modulating the levels of RlrA) and contributes to the delicate balance between pili expressing and non-expressing bacteria.

Gene Regulation of Biofilm-Associated Functional Amyloids

Biofilms are bacterial communities encased in a rigid yet dynamic extracellular matrix. The sociobiology of bacterial communities within a biofilm is astonishing, with environmental factors playing a crucial role in determining the switch from planktonic to a sessile form of life. The mechanism of biofilm biogenesis is an intriguingly complex phenomenon governed by the tight regulation of expression of various biofilm-matrix components. One of the major constituents of the biofilm matrix is proteinaceous polymers called amyloids. Since the discovery, the significance of biofilm-associated amyloids in adhesion, aggregation, protection, and infection development has been much appreciated. The amyloid expression and assembly is regulated spatio-temporarily within the bacterial cells to perform a diverse function. This review provides a comprehensive account of the genetic regulation associated with the expression of amyloids in bacteria. The stringent control ensures optimal utilization of amyloid scaffold during biofilm biogenesis. We conclude the review by summarizing environmental factors influencing the expression and regulation of amyloids.

Contribution of nascent cohesive fiber-fiber interactions to the non-linear elasticity of fibrin networks under tensile load

Fibrin is a viscoelastic proteinaceous polymer that determines the deformability and integrity of blood clots and fibrin-based biomaterials in response to biomechanical forces. Here, a previously unnoticed structural mechanism of fibrin clots' mechanical response to external tensile loads is tested using high-resolution confocal microscopy and recently developed three-dimensional computational model. This mechanism, underlying local strain-stiffening of individual fibers as well as global stiffening of the entire network, is based on previously neglected nascent cohesive pairwise interactions between individual fibers (crisscrossing) in fibrin networks formed under tensile load. Existence of fiber-fiber crisscrossings of reoriented fibers was confirmed using 3D imaging of experimentally obtained stretched fibrin clots. The computational model enabled us to study structural details and quantify mechanical effects of the fiber-fiber cohesive crisscrossing during stretching of fibrin gels at various spatial scales. The contribution of the fiber-fiber cohesive contacts to the elasticity of stretched fibrin networks was characterized by changes in individual fiber stiffness, the length, width, and alignment of fibers, as well as connectivity and density of the entire network. The results show that the nascent cohesive crisscrossing of fibers in stretched fibrin networks comprise an underappreciated important structural mechanism underlying the mechanical response of fibrin to (patho)physiological stresses that determine the course and outcomes of thrombotic and hemostatic disorders, such as heart attack and ischemic stroke. Statement of SignificanceFibrin is a viscoelastic proteinaceous polymer that determines the deformability and integrity of blood clots and fibrin-based biomaterials in response to biomechanical forces. In this paper, a novel structural mechanism of fibrin clots’ mechanical response to external tensile loads is tested using high-resolution confocal microscopy and newly developed computational model. This mechanism, underlying local strain-stiffening of individual fibers as well as global stiffening of the entire network, is based on previously neglected nascent cohesive pairwise interactions between individual fibers (crisscrossing) in fibrin networks formed under tensile load. Cohesive crisscrossing is an important structural mechanism that influences the mechanical response of blood clots and which can determine the outcomes of blood coagulation disorders, such as heart attacks and strokes.

Aggregate Formation During the Viral Lysis of a Marine Diatom

Recent studies have suggested that the viral lysis of microbes not only facilitates the conversion of particulate organic matter into dissolved organic matter, but also promotes the formation of organic aggregates, which enhance the export of organic carbon from the surface ocean to the deep sea. However, experimental data supporting this proposition are limited. Here, we tested the hypothesis that the viral infection of marine diatoms enhances aggregate formation. We used a model system consisting of Chaetoceros tenuissimus, a bloom-forming diatom with an approximate cell size of 3–10 µm, and a DNA virus, CtenDNAV type II, which replicates in the nucleus of C. tenuissimus. The volume of large particles (50–400 µm in equivalent spherical diameters, determined from photographic images) was measured over time (up to 15 days) in the diatom-alone control and a virus-added diatom culture. We also determined the concentrations of Coomassie-stainable particles (CSP, proteinaceous particles) and transparent exopolymeric particles (TEP, acid-polysaccharide-rich particles) with colorimetric methods. The total volume of large particles was significantly higher (5–59 fold) in the virus-added diatoms than in the diatom-alone control during the period in which the viral lysis of the diatoms proceeded. One class of large particles produced in the virus-added diatoms was flake-shaped. The flakes were tightly packed and dense, and sank rapidly, possibly playing an important role in the vertical delivery of materials from the surface to the deep sea. The bulk CSP concentrations tended to be higher in the virus-added diatoms than in the diatom-alone control, whereas the reverse was true for the TEP. These results suggest that proteinaceous polymers are involved in aggregate formation. Our data support the emerging notion that the viral lysis of microbes facilitates aggregate formation and the export of organic carbon in the ocean.

Elastin-Like Recombinamers As Smart Drug Delivery Systems.

Drug delivery systems that are able to control the release of bioactive molecules and designed to carry drugs to target sites are of particular interest for tissue therapy. Moreover, systems comprising materials that can respond to environmental stimuli and promote self-assembly and higher order supramolecular organization are especially useful in the biomedical field. Objetive: This review focuses on biomaterials suitable for this purpose and that include elastin-like recombinamers (ELRs), a class of proteinaceous polymers bioinspired by natural elastin, designed using recombinant technologies. The self-assembly and thermoresponsive behaviour of these systems, along with their biodegradability, biocompatibility and well-defined composition as a result of their tailormade design, make them particularly attractive for controlled drug delivery. ELR-based delivery systems that allow targeted delivery are reviewed, especially ELR-drug recombinant fusion constructs, ELR-drug systems chemically bioconjugated in their monomeric and soluble forms, and drug encapsulation by nanoparticle-forming ELRs. Subsequently, the review focuses on those drug carriers in which smart release is triggered by pH or temperature with a particular focus on cancer treatments. Systems for controlled drug release based on depots and hydrogels that act as both a support and reservoir in which drugs can be stored will be described, and their applications in drug delivery discussed. Finally, smart drug-delivery systems not based on ELRs, including those comprising proteins, synthetic polymers and non-polymeric systems, will also be briefly discussed. Several different constructions based on ELRs are potential candidates for controlled drug delivery to be applied in advanced biomedical treatments.

Matrix Mechanosensing: From Scaling Concepts in ’Omics Data to Mechanisms in the Nucleus, Regeneration, and Cancer

Many of the most important molecules of life are polymers. In animals, the most abundant of the proteinaceous polymers are the collagens, which constitute the fibrous matrix outside cells and which can also self-assemble into gels. The physically measurable stiffness of gels, as well as tissues, increases with the amount of collagen, and cells seem to sense this stiffness. An understanding of this mechanosensing process in complex tissues, including fibrotic disease states with high collagen, is now utilizing 'omics data sets and is revealing polymer physics-type, nonlinear scaling relationships between concentrations of seemingly unrelated biopolymers. The nuclear structure protein lamin A provides one example, with protein and transcript levels increasing with collagen 1 and tissue stiffness, and with mechanisms rooted in protein stabilization induced by cytoskeletal stress. Physics-based models of fibrous matrix, cytoskeletal force dipoles, and the lamin A gene circuit illustrate the wide range of testable predictions emerging for tissues, cell cultures, and even stem cell-based tissue regeneration. Beyond the epigenetics of mechanosensing, the scaling in cancer of chromosome copy number variations and other mutations with tissue stiffness suggests that genomic changes are occurring by mechanogenomic processes that now require elucidation.

Inhibition of Flash Rusting of HY80 By a Mussel Adhesive Protein: Characterizing the Interaction of MAP-5 with a High Strength Low Alloy Steel

A proteinaceous biopolymer, mussel adhesive protein #5, isolated from the common blue mussel (Mytilus edulis L) has been investigated as a model for designing an aqueously soluble candidate corrosion inhibitor system that is non-toxic and environmentally friendly and that could inhibit the flash rusting of exposed high strength low alloy steel surfaces during the paint removal process. It was found that a significant amount of corrosion inhibition is possible (100% inhibition after 7 days) on HY80 steel in a 100% relative humidity environment at 95°F. Indeed, these results were shown to surpass the performance of a commercially available flash rust inhibitor (90% inhibition after 7 days) currently in use on maritime vessels. These results indicated that it is possible to utilize the biochemistry of a naturally occurring biopolymer isolated from the marine mussel, Mytilus edulis (L), to develop a non-toxic and environmentally friendly corrosion inhibitor. This protein is unique in containing 27% L-Dopa and 20% lysine, two unique amino acids containing catecholic and primary amine functional groups, respectively. Currently, characterization of the interaction of the MAP-5 biopolymer on the steel substrate is underway to better understand its mechanism of corrosion inhibition. Energy dispersive spectroscopy (EDS) findings indicate that iron content is highest where the MAP-5 biopolymer is adsorbed onto the steel substrate at pH 5.5, twice the content of the iron on the steel surface alone. When the biopolymer is enzymatically cross-linked on the steel surface at pH 5.5, the iron content is decreased by 1/3 of that of the adsorbed biopolymer. These results suggest that the iron at the steel surface is undergoing complexation and possible metal-mediated cross-linking, whereas the enzyme cross-linked protein on the steel surface complexes less of the iron. Further EDS analysis indicates that when the biopolymer is first dissolved in acetic acid and then phosphate buffer added and placed on the HY80 surface, the same amount of iron is present for all conditions indicating that the presence of acetate or a more acidic pH inhibits any complexation of the iron by the biopolymer as well as any enzymatic cross-linking. Fourier transform infrared (FTIR) spectroscopy using attenuated total reflectance (ATR) and nanoscale IR spectroscopy of the MAP-5 adsorbed onto the steel substrate indicates that the peaks associated with the L-Dopa catecholic hydroxyl groups (-OH) present are very much diminished on the HY80 substrate vs on glass, whereas the aromatic benzene ring peak assignment of the catechol is present on both substrates, confirming the complexation of the surface iron atoms. However, the primary amine (NH3+) functional group present in the amino acid lysine is present in numerous peak assignments on both substrates, with deformation and scissoring, indicating their orientation at the metal surface. It has been suggested that the primary amine may allow for displacement of hydroxyl groups on a metal hydroxide surface, thus allowing the formation of a bi-dentate catechol complex by the L-Dopa amino acids present within the proteinaceous polymer.

A Distinct Type of Pilus from the Human Microbiome

Pili are proteinaceous polymers of linked pilins that protrude from the cell surface of many bacteria and often mediate adherence and virulence. We investigated a set of 20 Bacteroidia pilins from the human microbiome whose structures and mechanism of assembly were unknown. Crystal structures and biochemical data revealed a diverse protein superfamily with a common Greek-key β sandwich fold with two transthyretin-like repeats that polymerize into a pilus through a strand-exchange mechanism. The assembly mechanism of the central, structural pilins involves proteinase-assisted removal of their N-terminal β strand, creating an extended hydrophobic groove that binds the C-terminal donor strands of the incoming pilin. Accessory pilins at the tip and base have unique structural features specific to their location, allowing initiation or termination of the assembly. The Bacteroidia pilus, therefore, has a biogenesis mechanism that is distinct from other known pili and likely represents a different type of bacterial pilus.

Pili of Gram-positive bacteria: roles in host colonization

In the last decade, pili, which are encoded within pathogenicity islands, have been found in many Gram-positive bacteria, including the major streptococcal and enterococcal pathogens. These long proteinaceous polymers extending from the bacterial surface are constituted of covalently linked pilin subunits, which play major roles in adhesion and host colonization. They are also involved in biofilm formation, a characteristic life-style of the bacteria constituting the oral flora. Pili are highly immunogenic structures that are under the selective pressure of host immune responses. Indeed, pilus expression was found to be heterogeneous in several bacteria with the co-existence of two subpopulations expressing various levels of pili. The molecular mechanisms underlying this complex regulation are poorly characterized except for Streptococcus pneumoniae. In this review, we will discuss the roles of Gram-positive bacteria pili in adhesion to host extracellular matrix proteins, tissue tropism, biofilm formation, modulation of innate immune responses and their contribution to virulence, and in a second part the regulation of their expression. This overview should help to understand the rise of pili as an intensive field of investigation and pinpoints the areas that need further study.

Production of a Subunit Vaccine Candidate against Porcine Post-Weaning Diarrhea in High-Biomass Transplastomic Tobacco

Post-weaning diarrhea (PWD) in piglets is a major problem in piggeries worldwide and results in severe economic losses. Infection with Enterotoxigenic Escherichia coli (ETEC) is the key culprit for the PWD disease. F4 fimbriae of ETEC are highly stable proteinaceous polymers, mainly composed of the major structural subunit FaeG, with a capacity to evoke mucosal immune responses, thus demonstrating a potential to act as an oral vaccine against ETEC-induced porcine PWD. In this study we used a transplastomic approach in tobacco to produce a recombinant variant of the FaeG protein, rFaeGntd/dsc, engineered for expression as a stable monomer by N-terminal deletion and donor strand-complementation (ntd/dsc). The generated transplastomic tobacco plants accumulated up to 2.0 g rFaeGntd/dsc per 1 kg fresh leaf tissue (more than 1% of dry leaf tissue) and showed normal phenotype indistinguishable from wild type untransformed plants. We determined that chloroplast-produced rFaeGntd/dsc protein retained the key properties of an oral vaccine, i.e. binding to porcine intestinal F4 receptors (F4R), and inhibition of the F4-possessing (F4+) ETEC attachment to F4R. Additionally, the plant biomass matrix was shown to delay degradation of the chloroplast-produced rFaeGntd/dsc in gastrointestinal conditions, demonstrating a potential to function as a shelter-vehicle for vaccine delivery. These results suggest that transplastomic plants expressing the rFaeGntd/dsc protein could be used for production and, possibly, delivery of an oral vaccine against porcine F4+ ETEC infections. Our findings therefore present a feasible approach for developing an oral vaccination strategy against porcine PWD.

Biocompatibility of elastin‐like polymer poly(VPAVG) microparticles: in vitro and in vivo studies

Poly(L-valine-L-proline-L-alanine-L-valine-L-glycine) (VPAVG) is a new kind of proteinaceous polymer belonging to the Elastin-like family. These polymers are based on the recurrence of certain short peptide monomers that are considered as "building blocks" in the natural elastin. This smart thermoresponsive polymer has the ability to self-associate at physiological temperature to form aggregates with about 60% in water. This ability can be harnessed to prepare microparticles loaded with an active substance. The aim of this report is to evaluate, from the results of the experiment conducted, the biocompatibility of microparticles prepared from poly(VPAVG). We have studied the cytotoxic effects of microparticles, edema formation after subcutaneous injection (1 and 2.5 mg) in rats (n = 6), and also intraocular tolerance after the intravitreal injection of 2.5 mg of poly(VPAVG) microparticles into pigmented rabbits (n = 12). The polymer did not induce any cytotoxicity or nonspecific depression of cellular respiration on macrophages under the range of polymer concentrations investigated in this study (20, 30, 40, and 60 mg/mL). We observed no inflammatory response to microparticles after subcutaneous injection in the hind-paw of rats, with no significant differences between the control group (PBS) and experimental groups. Anterior and posterior segment signs were evaluated after intraocular injection of poly(VPAVG) microparticles. Only a few eyes (2/11) of the experimental group presented inflammation signs at day 28 postinjection. Nevertheless, 45% (5/11) of the eyes receiving microparticles showed tractional retinal detachment. The results observed in this work suggested certain fibroblastic activity induced by poly(VPAVG) microparticles after their intraocular injection.

Dynamic behavior of paired claudin strands within apposing plasma membranes.

The tight junction (TJ) strand is a linear proteinaceous polymer spanning plasma membranes, and each TJ strand associates laterally with another TJ strand in the apposing membranes of adjacent cells to form "paired" TJ strands. Claudins have been identified as the major constituents of TJ strands, and when exogenously expressed in L fibroblasts, they polymerize into paired strands, which are morphologically similar to paired TJ strands in epithelia. Here, we show that a fusion protein of GFP with claudin-1 can also form similar paired strands in L fibroblasts, allowing us to directly observe individual paired claudin strands in live cells in real time. These paired strands showed more dynamic behavior than expected; they were occasionally broken and annealed, and dynamically associated with each other in both an end-to-side and side-to-side manner. Through this behavior of individual paired claudin strands, the network of strands was reorganized dynamically. Furthermore, fluorescence recovery after photobleaching analyses revealed that claudin molecules were not mobile within paired strands. Although these observations are not necessarily representative of TJ strands per se in epithelial cells, they provide important information on the structural and kinetic properties of TJ strands in situ with significant implications for barrier function of TJs.

Unique Molecular Architecture of Silk Fibroin in the Waxmoth,Galleria mellonella

Proteins of silk fibers are characterized by reiterations of amino acid repeats. Physical properties of the fiber are determined by the amino acid composition, the complexity of repetitive units, and arrangement of these units into higher order arrays. Except for very short motifs of 6-10 residues, the length of repetitive units and the number of these units concatenated in higher order assemblies vary in all spider and lepidopteran silks analyzed so far. This paper describes an exceptional silk protein represented by the 500-kDa heavy chain fibroin (H-fibroin) of the waxmoth, Galleria mellonella. Its non-repetitive N-terminal (175 residues) and C-terminal (60 residues) parts, the overall gene organization, and the nucleotide sequence around the TATA box show that it is homologous to the H-fibroins of other Lepidoptera. However, over 95% of the protein consists of highly ordered repetitive structures that are unmatched in other species. The repetitive region includes 11 assemblies AB(1)AB(1)AB(1)AB(2)(AB(2))AB(2) of remarkably conserved polypeptide repeats A (63 amino acid residues), B(1) (43 residues), and B(2) (18 residues). The repeats contain a high proportion of Gly (31.6%), Ala (23.8%), Ser (18.1%), and of residues with long hydrophobic side chains (16% for Leu, Ile, and Val combined). The presence of the GLGGLG and SSAASAA(AA) motifs suggests formation of pleated beta-sheets and their stacking into crystallites. Conspicuous conservation of the apolar sequence VIVI followed by DD or ED is interpreted as indicating the importance of hydrophobicity and electrostatic charge in H-fibroin cross-linking. The environment of G. mellonella larvae within bee cultures requires continuous production of silk that must be both strong and elastic. The spectacular arrangement of the repetitive H-fibroin region apparently evolved to meet these requirements.

Evidence that extracellular components function in adherence of Actinobacillus actinomycetemcomitans to epithelial cells

Extracellular microvesicles and a highly proteinaceous polymer associated with a leukotoxin-producing strain, Actinobacillus actinomycetemcomitans SUNY 75, were shown to increase adherence of other weakly adherent A. actinomycetemcomitans strains to KB epithelial cells.

Bioconversion of Gelatin to Methane by a Coculture of Clostridium collagenovorans and Methanosarcina barkeri

A simple, stable, and transferable coculture of Clostridium collagenovorans and Methanosarcina barkeri that readily degraded gelatin into methane and carbon dioxide was developed. In monoculture, C. collagenovorans fermented all of the amino acids in gelatin except proline into acetate and carbon dioxide as the main products, with hydrogen, isovalerate, and isobutyrate detected in trace amounts (<1 mM). In coculture with M. barkeri, gelatin was transformed into methane and carbon dioxide, with varying levels of intermediary acetate formed as a function of incubation time. Various complex proteinaceous polymers could be readily transformed into methane and carbon dioxide at 30 to 40 degrees C by a stable coculture which did not require exogenous growth factor additions. In addition, the coculture was readily transferable and preserved in the viable state for long periods, and methanogenesis could be initiated rapidly without the need for exogenous pH control.

Involvement of nuclear lamins in postmitotic reorganization of chromatin as demonstrated by microinjection of lamin antibodies.

The nuclear lamins are major components of a proteinaceous polymer that is located at the interface of the nuclear membrane and chromatin; these lamins are solubilized and dispersed throughout the cytoplasm during mitosis. It has been postulated that these proteins, assembled into the lamina, provide an architectural framework for the organization of the cell nucleus. To test this hypothesis we microinjected lamin antibodies into cultured PtK2 cells during mitosis, thereby decreasing the soluble pool of lamins. The antibody injected was identified, together with the lamins, in cytoplasmic aggregates by immunoelectron microscopy. We show that microinjected cells are not able to form normal daughter nuclei, in contrast to cells injected with other immunoglobulins. Although cells injected with lamin antibodies are able to complete cytokinesis, the chromatin of their daughter nuclei remains arrested in a telophase-like configuration, and the telophase-like chromatin remains inactive as judged from its condensed state and by the absence of nucleoli. These results indicate that lamins and the nuclear lamina structure are involved in the functional organization of the interphase chromatin.