Protein Origami Research Articles

Comparative Simulative Analysis and Design of Single-Chain Self-Assembled Protein Cages.

Coiled-coil protein origami (CCPO) is a modular strategy for the de novo design of polypeptide nanostructures. It represents a type of modular design based on pairwise-interacting coiled-coil (CC) units with a single-chain protein programmed to fold into a polyhedral cage. However, the mechanisms underlying the self-assembly of the protein tetrahedron are still not fully understood. In the present study, 18 CCPO cages with three different topologies were modeled in silico. Then, molecular dynamics simulations and CC parameters were calculated to characterize the dynamic properties of protein tetrahedral cages at both the local and global levels. Furthermore, a deformed CC unit was redesigned, and the stability of the new cage was significantly improved.

Preorganized cyclic modules facilitate the self-assembly of protein nanostructures.

The rational design of supramolecular assemblies aims to generate complex systems based on the simple information encoded in the chemical structure. Programmable molecules such as nucleic acids and polypeptides are particularly suitable for designing diverse assemblies and shapes not found in nature. Here, we describe a strategy for assembling modular architectures based on structurally and covalently preorganized subunits. Cyclization through spontaneous self-splicing of split intein and coiled-coil dimer-based interactions of polypeptide chains provide structural constraints, facilitating the desired assembly. We demonstrate the implementation of a strategy based on the preorganization of the subunits by designing a two-chain coiled-coil protein origami (CCPO) assembly that adopts a tetrahedral topology only when one or both subunit chains are covalently cyclized. Employing this strategy, we further design a 109 kDa trimeric CCPO assembly comprising 24 CC-forming segments. In this case, intein cyclization was crucial for the assembly of a concave octahedral scaffold, a newly designed protein fold. The study highlights the importance of preorganization of building modules to facilitate the self-assembly of higher-order supramolecular structures.

Engineering of brick and staple components for ordered assembly of synthetic repeat proteins

Synthetic ɑRep repeat proteins are engineered as Brick and Staple protein pairs that together self-assemble into helical filaments. In most cases, the filaments spontaneously form supercrystals. Here, we describe an expanded series of ɑRep Bricks designed to stabilize the interaction between consecutive Bricks, to control the length of the assembled multimers, or to alter the spatial distribution of the Staple on the filaments. The effects of these Brick modifications on the assembly, on the final filament structure and on the crystal symmetry are analyzed by biochemical methods, electron microscopy and small angle X-ray scattering. We further extend the concept of Brick/Staple protein origami by designing a new type of “Janus”-like Brick protein that is equally assembled by orthogonal staples binding its inner or outer surfaces and thus ending inside or outside the filaments. The relative roles of longitudinal and lateral associations in the assembly process are discussed. This set of results demonstrates important proofs-of-principle for engineering these remarkably versatile proteins toward nanometer-to-micron scale constructions.

Crystal Structure of de Novo Designed Coiled-Coil Protein Origami Triangle.

Coiled-coil protein origami (CCPO) uses modular coiled-coil building blocks and topological principles to design polyhedral structures distinct from those of natural globular proteins. While the CCPO strategy has proven successful in designing diverse protein topologies, no high-resolution structural information has been available about these novel protein folds. Here we report the crystal structure of a single-chain CCPO in the shape of a triangle. While neither cyclization nor the addition of nanobodies enabled crystallization, it was ultimately facilitated by the inclusion of a GCN2 homodimer. Triangle edges are formed by the orthogonal parallel coiled-coil dimers P1:P2, P3:P4, and GCN2 connected by short linkers. A triangle has a large central cavity and is additionally stabilized by side-chain interactions between neighboring segments at each vertex. The crystal lattice is densely packed and stabilized by a large number of contacts between triangles. Interestingly, the polypeptide chain folds into a trefoil-type protein knot topology, and AlphaFold2 fails to predict the correct fold. The structure validates the modular CC-based protein design strategy, providing molecular insight underlying CCPO stabilization and new opportunities for the design.

Protein Origami

Chemistry & IndustryVolume 87, Issue 4 p. 22-25 Biochemistry Protein Origami First published: 13 April 2023 https://doi.org/10.1002/cind.10096AboutPDF ToolsRequest permissionExport citationAdd to favoritesTrack citation ShareShare Give accessShare full text accessShare full-text accessPlease review our Terms and Conditions of Use and check box below to share full-text version of article.I have read and accept the Wiley Online Library Terms and Conditions of UseShareable LinkUse the link below to share a full-text version of this article with your friends and colleagues. Learn more.Copy URL Volume87, Issue4April 2023Pages 22-25 RelatedInformation

Design, synthesis, and characterization of protein origami based on self-assembly of a brick and staple artificial protein pair

A versatile strategy to create an inducible protein assembly with predefined geometry is demonstrated. The assembly is triggered by a binding protein that staples two identical protein bricks together in a predictable spatial conformation. The brick and staple proteins are designed for mutual directional affinity and engineered by directed evolution from a synthetic modular repeat protein library. As a proof of concept, this article reports on the spontaneous, extremely fast and quantitative self-assembly of two designed alpha-repeat (αRep) brick and staple proteins into macroscopic tubular superhelices at room temperature. Small-angle X-ray scattering (SAXS) and transmission electron microscopy (TEM with staining agent and cryoTEM) elucidate the resulting superhelical arrangement that precisely matches the a priori intended 3D assembly. The highly ordered, macroscopic biomolecular construction sustains temperatures as high as 75 °C thanks to the robust αRep building blocks. Since the α-helices of the brick and staple proteins are highly programmable, their design allows encoding the geometry and chemical surfaces of the final supramolecular protein architecture. This work opens routes toward the design and fabrication of multiscale protein origami with arbitrarily programmed shapes and chemical functions.

Coiled-Coil Protein Origami: Design, Isolation, and Characterization.

Coiled-coil protein origami (CCPO) is a rationally designed de novo protein fold, constructed by concatenating coiled-coil forming segments into a polypeptide chain, that folds into polyhedral nano-cages. To date, nanocages in the shape of a tetrahedron, square pyramid, trigonal prism, and trigonal bipyramid have been successfully designed and extensively characterized following the design principles of CCPO. These designed protein scaffolds and their favorable biophysical properties are suitable for functionalization and other various biotechnological applications. To further facilitate the development, we are presenting a detailed guide to the world of CCPO, starting from design (CoCoPOD, an integrated platform for designing CCPO strictures) and cloning (modified Golden-gate assembly) to fermentation and isolation (NiNTA, Strep-trap, IEX, and SEC) concluding with standard characterization techniques (CD, SEC-MALS, and SAXS).

Directed Self-Assembly of Dimeric Building Blocks into Networklike Protein Origami to Construct Hydrogels.

Engineering proteins to construct self-assemblies is of crucial significance not only for understanding the sophisticated living systems but also for fabricating advanced materials with unexplored functions. However, due to the inherent chemical heterogeneity and structural complexity of the protein surface, designing complex protein assemblies in an anisotropic fashion remains challenging. Here, we describe a self-assembly approach to fabricating protein origami with a networklike structure by designing dual noncovalent interactions on the different positions of a single protein building block. With dimeric proteins as building blocks, 1D protein filaments were constructed by the designed metal coordination at key protein interfaces. Subsequently, the network superstructures were created by the cross-linking of the 1D protein filaments at branch point linkages through the second designed π-π stacking interactions. Notably, upon increasing the protein concentration, the formed protein networks convert into hydrogels with reversible, injectable, and self-healing properties, which have the ability to promote bone regeneration. This strategy could be used to fabricate other protein-based materials with unexplored functions.

Coiled-coil protein origami nanostructure modeling for improved characterization and prediction

A computational approach of comparative modeling with molecular dynamics optimization is presented for improved characterization and prediction of the atomic structures of coiled-coil protein origami.

Pharmacological Functionalization of Protein-Based Nanorobots as a Novel Tool for Drug Delivery in Cancer.

The delivery of hydrophobic therapeutic agents to tumors is a challenge in the treatment of cancers. Here, we review recent advances in coiled-coil protein origami and discuss a proposed programmable protein origami structure, switchable by a protein kinase A/phosphatase switch, as an example of functionalization for designing future protein nanorobots.

A nanobody toolbox targeting dimeric coiled-coil modules for functionalization of designed protein origami structures

Coiled-coil (CC) dimers are widely used in protein design because of their modularity and well-understood sequence-structure relationship. In CC protein origami design, a polypeptide chain is assembled from a defined sequence of CC building segments that determine the self-assembly of protein cages into polyhedral shapes, such as the tetrahedron, triangular prism, or four-sided pyramid. However, a targeted functionalization of the CC modules could significantly expand the versatility of protein origami scaffolds. Here, we describe a panel of single-chain camelid antibodies (nanobodies) directed against different CC modules of a de novo designed protein origami tetrahedron. We show that these nanobodies are able to recognize the same CC modules in different polyhedral contexts, such as isolated CC dimers, tetrahedra, triangular prisms, or trigonal bipyramids, thereby extending the ability to functionalize polyhedra with nanobodies in a desired stoichiometry. Crystal structures of five nanobody-CC complexes in combination with small-angle X-ray scattering show binding interactions between nanobodies and CC dimers forming the edges of a tetrahedron with the nanobody entering the tetrahedral cavity. Furthermore, we identified a pair of allosteric nanobodies in which the binding to the distant epitopes on the antiparallel homodimeric APH CC is coupled via a strong positive cooperativity. A toolbox of well-characterized nanobodies specific for CC modules provides a unique tool to target defined sites in the designed protein structures, thus opening numerous opportunities for the functionalization of CC protein origami polyhedra or CC-based bionanomaterials.

Self-assembly and regulation of protein cages from pre-organised coiled-coil modules

Coiled-coil protein origami (CCPO) is a modular strategy for the de novo design of polypeptide nanostructures. CCPO folds are defined by the sequential order of concatenated orthogonal coiled-coil (CC) dimer-forming peptides, where a single-chain protein is programmed to fold into a polyhedral cage. Self-assembly of CC-based nanostructures from several chains, similarly as in DNA nanotechnology, could facilitate the design of more complex assemblies and the introduction of functionalities. Here, we show the design of a de novo triangular bipyramid fold comprising 18 CC-forming segments and define the strategy for the two-chain self-assembly of the bipyramidal cage from asymmetric and pseudo-symmetric pre-organised structural modules. In addition, by introducing a protease cleavage site and masking the interfacial CC-forming segments in the two-chain bipyramidal cage, we devise a proteolysis-mediated conformational switch. This strategy could be extended to other modular protein folds, facilitating the construction of dynamic multi-chain CC-based complexes.

Designed folding pathway of modular coiled-coil-based proteins

Natural proteins are characterised by a complex folding pathway defined uniquely for each fold. Designed coiled-coil protein origami (CCPO) cages are distinct from natural compact proteins, since their fold is prescribed by discrete long-range interactions between orthogonal pairwise-interacting coiled-coil (CC) modules within a single polypeptide chain. Here, we demonstrate that CCPO proteins fold in a stepwise sequential pathway. Molecular dynamics simulations and stopped-flow Förster resonance energy transfer (FRET) measurements reveal that CCPO folding is dominated by the effective intra-chain distance between CC modules in the primary sequence and subsequent folding intermediates, allowing identical CC modules to be employed for multiple cage edges and thus relaxing CCPO cage design requirements. The number of orthogonal modules required for constructing a CCPO tetrahedron can be reduced from six to as little as three different CC modules. The stepwise modular nature of the folding pathway offers insights into the folding of tandem repeat proteins and can be exploited for the design of modular protein structures based on a given set of orthogonal modules.

Triangular in Vivo Self-Assembling Coiled-Coil Protein Origami.

Coiled-coil protein origami (CCPO) polyhedra are designed self-assembling nanostructures constructed from coiled coil (CC)-forming modules connected into a single chain. For testing new CCPO building modules, simpler polyhedra could be used that should maintain most features relevant to larger scaffolds. We show the design and characterization of nanoscale single-chain triangles, composed of six concatenated parallel CC dimer-forming segments connected by flexible linker peptides. The polypeptides self-assembled in bacteria in agreement with the design, and the shape of the polypeptides was confirmed with small-angle X-ray scattering. Fusion with split-fluorescent protein domains was used as a functional assay in bacteria, based on the discrimination between the correctly folded and misfolded nanoscale triangles comprising correct, mismatched, or truncated modules. This strategy was used to evaluate the optimal size of linkers between CC segments which comprised eight amino acid residues.

Rational Design and Self-Assembly of Coiled-Coil Linked SasG Protein Fibrils.

Protein engineering is an attractive approach for the self-assembly of nanometer-scale architectures for a range of potential nanotechnologies. Using the versatile chemistry provided by protein folding and assembly, coupled with amino acid side-chain functionality, allows for the construction of precise molecular "protein origami" hierarchical patterned structures for a range of nanoapplications such as stand-alone enzymatic pathways and molecular machines. The Staphyloccocus aureus surface protein SasG is a rigid, rod-like structure shown to have high mechanical strength due to "clamp-like" intradomain features and a stabilizing interface between the G5 and E domains, making it an excellent building block for molecular self-assembly. Here we characterize a new two subunit system composed of the SasG rod protein genetically conjugated with de novo designed coiled-coils, resulting in the self-assembly of fibrils. Circular dichroism (CD) and quartz-crystal microbalance with dissipation (QCM-D) are used to show the specific, alternating binding between the two subunits. Furthermore, we use atomic force microscopy (AFM) to study the extent of subunit polymerization in a liquid environment, demonstrating self-assembly culminating in the formation of linear macromolecular fibrils.

Protein ORIGAMI: A program for the creation of 3D paper models of folded peptides.

Protein ORIGAMI (http://ibg.kit.edu/protein_origami) is a browser-based web application that allows the user to create straightforward 3D paper models of folded peptides for research, teaching and presentations. An amino acid sequence can be turned into α-helices, β-strands and random coils that can be printed out and folded into properly scaled models, with a color code denoting the biophysical characteristics of each amino acid residue (hydrophobicity, charge, etc.). These models provide an intuitive visual and tactile understanding of peptide interactions with other partners, such as helix-helix assembly, oligomerization, membrane binding, or pore formation. Helices can also be displayed as a helical wheel or helical mesh in 2D graphics, to be used in publications or presentations. The highly versatile programme Protein ORIGAMI is also suited to create less conventional helices with arbitrary pitch (e.g., 310 -helix, π-helix, or left-handed helices). Noncanonical amino acids, labels and different terminal modifications can be defined and displayed at will, and different protonation states can be shown. In addition to the web application, the program source code can be downloaded and installed locally on a PC. The printed paper models can be readily used for daily research and discussions, just as for educational purposes and teaching. © 2018 by The International Union of Biochemistry and Molecular Biology, 46:403-409, 2018.

Coiled coil protein origami: from modular design principles towards biotechnological applications.

The design of new protein folds represents a grand challenge for synthetic, chemical and structural biology. Due to the good understanding of the principles governing its pairing specificity, coiled coil (CC) peptide secondary structure elements can be exploited for the construction of modular protein assemblies acting as a proxy for the straightforward complementarity of DNA modules. The prerequisite for the successful translation of the modular assembly strategy pioneered by DNA nanotechnology to protein design is the availability of orthogonal building modules: a collection of peptides that assemble into CCs only with their predetermined partners. Modular CC-based protein structures can self-assemble from multiple polypeptide chains whose pairing is determined by the interaction pattern of the constituent building blocks. Orthogonal CC sets can however also be used for the design of more complex coiled coil protein origami (CCPO) structures. CCPOs are based on multiple CC modules concatenated into a single polypeptide chain that folds into a polyhedral protein cage as the peptide segments assemble into CC dimers. The CCPO strategy has hitherto led to successful de novo design of protein cages in the shape of a tetrahedron, square pyramid and triangular prism. Recent advances in the design of CC modules and design principles have enabled the construction of CCPOs that self-assemble in vivo without any apparent toxicity to human cells or animals, opening the path towards therapeutic applications. The CCPO platform therefore has potential for diverse applications in biomedicine and biotechnology, from drug delivery to molecular cages.

Designed Protein Origami.

Proteins are highly perfected natural molecular machines, owing their properties to the complex tertiary structures with precise spatial positioning of different functional groups that have been honed through millennia of evolutionary selection. The prospects of designing new molecular machines and structural scaffolds beyond the limits of natural proteins make design of new protein folds a very attractive prospect. However, de novo design of new protein folds based on optimization of multiple cooperative interactions is very demanding. As a new alternative approach to design new protein folds unseen in nature, folds can be designed as a mathematical graph, by the self-assembly of interacting polypeptide modules within the single chain. Orthogonal coiled-coil dimers seem like an ideal building module due to their shape, adjustable length, and above all their designability. Similar to the approach of DNA nanotechnology, where complex tertiary structures are designed from complementary nucleotide segments, a polypeptide chain composed of a precisely specified sequence of coiled-coil forming segments can be designed to self-assemble into polyhedral scaffolds. This modular approach encompasses long-range interactions that define complex tertiary structures. We envision that by expansion of the toolkit of building blocks and design strategies of the folding pathways protein origami technology will be able to construct diverse molecular machines.

Structure of Mega-Hemocyanin Reveals Protein Origami in Snails

Mega-hemocyanin is a 13.5 MDa oxygen transporter found in the hemolymph of some snails. Similar to typical gastropod hemocyanins, it is composed of 400kDa building blocks but has additional 550kDa subunits. Together, they form a large, completely filled cylinder. The structural basis for this highly complex protein packing is not known so far. Here, we report the electron cryomicroscopy (cryo-EM) structure of mega-hemocyanin complexes from two different snail species. The structures reveal that mega-hemocyanin is composed of flexible building blocks that differ in their conformation, but not in their primary structure. Like a protein origami, these flexible blocks are optimally packed, implementing different local symmetries and pseudosymmetries. A comparison between the two structures suggests a surprisingly simple evolutionary mechanism leading to these large oxygen transporters.

Predictive protein origami

Predictive protein origami