Prosthetic Complications Research Articles

Comparative Study of Implant Placement Techniques and Their Effect on Long-Term Success of Implant-Supported Restorations

ABSTRACT Background: The long-term success of implant-supported restorations is influenced by various implant placement techniques. Materials and Methods: This randomized controlled trial involved 120 patients requiring dental implants, divided into three equal groups based on the implant placement technique: Group A (conventional submerged), Group B (one-stage non-submerged), and Group C (guided surgery). All participants were followed for three years. The primary outcomes measured were implant stability (using implant stability quotient (ISQ) values) and marginal bone loss (using radiographic analysis). Secondary outcomes included patient satisfaction and prosthetic complications. Results: The study results demonstrated significant differences among the implant placement techniques. Group C (guided surgery) exhibited the highest mean implant stability, with an ISQ value of 75.4, outperforming Group B (one-stage non-submerged) at 73.2 and Group A (conventional submerged) at 71.5. In terms of marginal bone loss, Group A demonstrated the greatest loss at 1.5 mm, whereas Group B and Group C experienced less bone loss, measuring 1.1 mm and 0.9 mm, respectively. Patient satisfaction scores were highest in Group C, with an average of 9.2 out of 10, followed by Group B at 8.7 and Group A at 8.3. Additionally, Group A recorded the highest incidence of prosthetic complications at 15%, compared to 10% in Group B and 5% in Group C, highlighting the superior performance of guided surgery in minimizing complications and enhancing overall outcomes. Conclusion: Guided implant surgery demonstrated superior outcomes in terms of implant stability, reduced marginal bone loss, and higher patient satisfaction compared to conventional submerged and one-stage techniques.

The Survival Rate of the Retention System for Extraoral Maxillofacial Prosthetic Implant: A Systematic Review.

This systematic review examines the survival rate of retention systems available for extraoral implant-supported prosthesis as there appears to be a lack of information in the literature regarding the same due to the limited data that represents the benefits and drawbacks of each system. The current investigation addresses this gap.If clinicians recognize the optimal survivalrate of each retention system, they can select the appropriate retentive attachments increasing patient satisfaction regarding the use craniofacial prosthesis. The objective of this systematic review is to determine the optimal retention system for implant-retained craniofacial prosthesis. This systematic review has followed the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) guidelines. A comprehensive electronic database search was performed to locate research articles on implant-retained craniofacial prostheses published from 2002 to 2024. The included studies were conducted in the English language and specifically compared various retention techniques or provided information on the survival rate, mechanical behavior, and prosthetic complications. Ten of 2857satisfied the requirements for inclusion and were analyzed.

Short implant versus conventional implant in the posterior atrophic maxilla: A systematic review and meta-analysis

Objective: A comparative study undertaken to measure the the marginal bone loss (MBL), implant survival rate, and prosthetic and biological complications among short implants (8 mm or shorter) and conventional implants (longer than 8 mm) in the posterior atrophic maxilla. Materials and Methods: A search in three databases PubMed (Medline), Scopus, and Cochrane was conducted. The present systematic review was registered with identification number CRD42020212805 at the International Prospective Register of Systematic Reviews. Data extraction included the publication year, patients’ number and number of implants, implant length and width, MBL, implant survival rate, and biological and mechanical complications. The Cochrane Risk of Bias 1.0 tool was used to assess the risk of bias. A meta-analysis was performed to evaluate the outcome variables. Comparisons for dichotomous variables, such as prosthetic and biological complications and implant survival rate, were done by applying the Mantel–Haenszel method. In contrast, a comparison was made by applying the inverse variance method for continuous variables like MBL. Results: Initially, 618 reports were recognized from electronic database searches. Five randomized controlled trials (RCTs) were included in the meta-analyses regarding the MBL, implant survival rate, and prosthetic complications, while three were included for biological complications. In 5 years of follow-up, no evidence of difference could be found between conventional and short implants for survival rate (risk ratio [RR]: 3.54; 95% confidence interval [CI]: 0.99–12.67; P = 0.05; I 2 = 0%). We do not find any evidence of difference for MBL between short implants and conventional implants (mean difference: −0.29; 95% CI: −0.49 to −0.08; P = 0.02; I 2 = 65%). Furthermore, no evidence of a difference exists between short and conventional implants for prosthetic complications (RR: 1.56; 95% CI: 0.68–3.55; P = 0.29; I 2 = 0%). The biological complications were seen less with short implants (RR: 0.47; 95% CI: 0.24–0.93; P = 0.03; I 2 = 0%). Conclusion: The results suggest no significant difference among conventional and short implants regarding survival rate in the posterior atrophic maxilla. The results of this systematic review and meta-analysis suggest that, for a 5-year period of follow-up, short implants are related to rarer biological complications and comparable MBL compared to conventional implants. Despite these promising findings, long-term studies with consistent study designs and clinical protocols are required to appraise the performance and durability of short implants.

Do modifiable patient factors increase the risk of postoperative complications after total joint arthroplasty?

Numerous studies demonstrate that modifiable lifestyle risk factors can influence patient outcomes including survivability, quality of life, and postoperative complications following orthopaedic surgery. The purpose of this study was to determine the impact of modifiable lifestyle risk factors on postoperative medical and surgical complications following a total joint arthroplasty (TJA) in a large national healthcare system. A retrospective chart review of a large national health system database was performed to identify patients who underwent TJA between 2017 and 2021. TJA included total knee arthroplasty, total hip arthroplasty, and total shoulder arthroplasty. Modifiable lifestyle risk factors were defined as tobacco use, narcotic drug abuse, hypertension, and diabetes mellitus. Postoperative medical complications and postoperative surgical complications were collected. Logistic regression and odds ratio point estimate analysis were conducted to assess for associations between postoperative complications and modifiable lifestyle risk factors. Of the 16,940 patients identified, the mean age was 71 years, mean BMI was 29.7kg/m2, and 62% were women. We found that 3.5% had used narcotics, 8.7% were past or current smokers, 24% had diabetes, and 61% had hypertension; in addition, 5.4% experienced postoperative medical complications and 6.4% experienced postoperative surgical complications. Patients who used narcotics were 90% more likely to have postoperative complications (p < 0.0001) and 105% more likely to experience prosthetic complications (p < 0.0001). Similarly, patients with tobacco use were 65% more likely to have postoperative complications (p < 0.0001) and 27% more likely to experience prosthetic complications. Our results demonstrate critical rates of increased postoperative medical and surgical complications after TJA for patients with narcotic abuse, tobacco use, or diabetes mellitus. Furthermore, adopting preoperative interventions and optimization programs informed by our findings on specific modifiable risk factors could aid orthopaedic surgeons in optimizing patient health. III; Retrospective study.

Immediate Implantation with Autologous Mineralized Dentin Graft versus Deproteinized Bovine Bone as Space-Filling Substitute in Maxillary Anterior Zone: Retrospective Radiological and Clinical Study.

Background/Objectives: Various bone substitutes have been recommended to augment the horizontal gap following immediate implantation. The purpose of this study was to compare the effectiveness of an autogenous mineralized dentin graft or a deproteinized bovine bone in horizontal gap augmentation following immediate implant placement in the maxillary anterior region. Methods: A total of 110 patients underwent tooth extraction followed by immediate implant placement. The patients were divided into two groups. The first group received an autogenous mineralized dentin graft (the test group) while the second group received a deproteinized bovine bone (the control group) to augment the horizontal gap. Preoperative (T0), immediate postoperative (T1), and 1-year postoperative (T2) cone beam computed tomography scans were taken from all the patients. Linear measurements were recorded 1 mm (R1) and 5 mm (R2) points apical to the implant platform at both T1 and T2 time intervals. Pink Esthetic Scores and prosthetic complications were evaluated as well. Results: There were 57 patients with a mean age of 45.42 ± 9.86 (range 24-63 years) selected as the test group and 53 patients with a mean age of 40.28 ± 11.69 (range 20-63 years) as the control group. The mean reduction in the buccal bone plate at R1 was 6.39 ± 3.78% in the test group and 6.99 ± 5.01% in the control group (p > 0.05). The mean reduction in the buccal bone plate at R2 was 5.46 ± 4.98% in the test group and 6.77 ± 7.60% in the control group (p < 0.05). The PES and prosthetic-related complications were shown to be negligible between the groups (p > 0.05). Conclusions: The efficiency of using an autogenous mineralized dentin graft for horizontal gap augmentation showed similar results in comparison to using a deproteinized bovine bone in relation to buccolingual socket reduction following immediate implantation.

Clinical Performance of Extra-Short (≤5.5 mm) Compared to Longer Implants Splinted under the Same Prosthesis: A Randomized Clinical Trial.

Objective: This randomized controlled split-mouth trial compared the performance of 5.5 mm length implants (test group; TG) splinted within the same fixed prosthesis as longer implants (≥6.5 mm; control group; CG) in posterior regions. Methods: The primary hypothesis was that implant length does not affect marginal bone loss (MBL) one year post-implantation, while the secondary hypotheses included implant survival, peri-implant clinical variables, and prosthetic complications. Fifteen patients (eight males, seven females) with a mean age of 67 ± 9 years were included. Results: No significant difference in the implant position between groups (p = 0.808) was observed. Implant diameters ranged from 3.00 to 4.25 mm, and the most common bone type was type I (67%). Bone density (p = 0.574) and implant insertion torque (p = 0.888) were similar between groups. Mesial MBL (mean: -0.1; range: -1.19 to 0.24 for TG, and -0.03; -1.75 to 0.45 for CG; p = 0.955) and distal MBL (mean: -0.05; range: -1.41 to 0.27 for TG, and 0.08; -1.45 to 0.72 for CG; p = 0.118) did not show statistical differences. There were no implant failures or technical complications. Conclusions: These findings suggest that 5.5 mm length implants could be a viable option for use in posterior regions, providing similar clinical outcomes to longer implants one year post-implantation.

Immediate versus conventional loading in short and ultra-short implants: a protocol design.

After tooth extraction, inevitable resorption of the postextraction socket occurs. Placing an immediate implant does not fully preserve the bone integrity of the socket. Preservation techniques cannot avoid alveolar resorption. In residual atrophies, bone augmentation techniques are necessary for subsequent rehabilitation with implants. The aim of this study was to propose a protocol of immediate loading in short implants as an alternative to bone augmentation techniques, comparing the immediate versus conventional loading, evaluating peri-implant bone loss, the biological and prosthetic complications, the survival of the implant and prosthesis and the patient satisfaction after one year. This study consists of a randomized controlled clinical trial. For implant planning, periapical intraoral radiographs and Cone Beam Computed Tomography will be used. All patients will receive Straumann Group® (Basel, Switzerland) titanium-zirconia implants with a 4.1mm or 4.8mm diameter and a 4 mm or 6 mm length. The expected results show similar or even minor bone loss, biological and prosthetic complications, identical or even better survival of the short implants with immediate loading, and greater satisfaction. Short implants demonstrate similar survival to conventional length implants, with comparable or even minor biological and prosthetic complications and bone loss. Immediate loading gives satisfactory results similar to conventional loading, with similar biological and prosthetic complications, and generally depends on poor hygiene levels. Bone loss is even less, and the satisfaction increases.

Seven-Year Retrospective Study on Conometric Retention for Complete Fixed Prosthesis

The aim of the present work was to evaluate retrospectively, after seven years of function, the efficacy of a conometric retention to stabilize complete prostheses (CPs) on four implants. Data from twenty-three patients with CPs supported by four implants, with at least seven years of follow up were retrieved. All the CPs were immediately fixed to the implants using a conometric retention. Outcome measures were prosthesis and implant success, biological and prosthetic complications, probing pocket depth changes, marginal bleeding, and plaque index changes. A total of 92 implants were evaluated. No fixture or abutment fractures were reported. No abutment unscrewing was reported. Four framework fractures occurred after three, four, six, and seven years of function. The overall success rate of the rehabilitation was 82.6%. Mucositis was observed in eight patients and 13 implants. No peri-implantitis was recorded. A 0.55 mm difference of PPD and 0.74 mm of MBL was recorded after seven years (p &lt; 0.001). The present implant-supported conometric retention system proved to be effective in giving fixed retention to a CP supported by four implants. Biological complications were easily detected and treated. An adequate metal framework should be provided to the definitive restoration to avoid fractures in the long term.

Stereo-Photogrammetry for Impression of Full-Arch Fixed Dental Prosthesis—An Update of the Reviews

Photogrammetry (PG) appeared as an alternative for multiple implant impressions. Stereo-photogrammetry is a more sophisticated alternative to PG, which estimates the 3D coordinates of the points of an object, making the process quicker and more precise. A search in PubMed MEDLINE, PMC, and Google Scholar was conducted to find systematic reviews published in the last 10 years. The PICdental® camera (IDITEC NORTH WEST, SL; Torrelodones, Spain) is a stereocamera that records implant positions in the mouth by means of photogrammetry with the objective of registering and obtaining a viable, reliable, and direct digital impression of the positions of the multiple implants. The use of photogrammetry via PiCdental® camera as an alternative to digital impression for multiple implants is an easy and trustworthy technique that permits an adequate fit without prosthetic complications.

An Analysis of Scientific Research Trends in Oral Implantology Between 2016 and 2022.

The present study aims to evaluate the trends of oral implant-related research in design and topics between the range of 2016 to the end of 2022. The electronic search was conducted in MEDLINE via Pubmed. Papers published in Clinical Oral Implant Research, Clinical Implant Dentistry and Related Research, and International Journal of Oral Implantology as well as previously European Journal of Oral Implantology, International Journal of Oral and Maxillofacial Implants, and Journal of Oral Implantology between January 1, 2016, and December 30, 2022, were retrieved. Articles were classified according to their study design and major subjects. The Joinpoint regression model was used to determine changes in the trends of study designs and topics. Statistical significance was defined as a p-value <.05. A total of 3382 articles were analyzed in this study. In the specified period, in vivo, prospective cohort, retrospective case control, randomized clinical studies in the design and prosthetic complications, peri-implant hard tissue studies in the topic experienced a significant decreasing pattern in the number of published articles as well as the total number of articles. Case reports and series, retrospective cohort, nonrandomized clinical studies in the design and outcomes of implant-related treatment plans, immediate implant placement, and peri-implantitis in the topic experienced a significant decreasing pattern followed by a significant increasing pattern with a turning point between 2017 and 2020. Considering the limitations of this scientific topical trend analysis, it can be concluded that the recent pandemic affected the research path in oral implantology in many ways.

Mandibular overdenture retained by four one-piece titanium-zirconium mini implants: A 2-year follow-up on prosthodontic outcomes

ObjectiveThis 2-year prospective study reports the incidence of prosthetic complications and maintenance events after treatment with mandibular overdenture retained by four mini implants opposed to a maxillary denture. MethodsImplant intervention included flapless or flapped surgery combined with immediate or delayed loading, as part of a randomized clinical trial. Four one-piece titanium-zirconium mini-implants (Straumann Mini Implant System) were inserted, and the retentive PEEK elements (Optiloc) were incorporated into the overdenture using chairside procedures. Prosthodontic complications and maintenance events were recorded over a 2-year follow-up, and the final outcome was defined according to standardized criteria. Data analysis included descriptive statistics, incidence and incidence density rates, and Kaplan-Meier survival. Results73 out of 74 patients (64.9 % female), mean age of 64 (SD=8.2) years, completed the study follow-up (one withdrew after 9 months). Implant survival was 100 %. A total of 163 prosthodontic events occurred in 53 patients (72.6 %), and 20 patients had no clinical complaints or maintenance needs. The most common procedures were adjustment/repair of the overdenture base (47.0 %), replacement of retentive inserts (19.8 %), and laboratory relining (12.9 %). A high prosthodontic success rate was achieved (93.2 %), and all patients presented serviceable overdentures and continuous use after the resolution of prosthodontic complications. The incidences of matrix replacement and laboratory relines were low in the first year, while denture base adjustments were common within the first year, especially in the first 6 months. ConclusionThe mini implant system showed high prosthodontic success rates. Minor adjustments/repairs during the initial follow-up were common. Relines and matrix replacements tend to occur after one year of overdenture use, and matrix replacements may occur as a consequence of the need for relining.

Classification system for maxillary fixed dental prostheses.

To present an addendum to existing fixed dental prostheses (FDPs) classification system for maxillary prostheses. The new classification identifies the relationships between FP-1 (fixed prostheses) designs and newly developed clinical interdental gingival contours. Clinical and laboratory descriptions of the various types of full-arch fixed prostheses are described with photographic illustrations. Benefits and limitations of the various prosthetic designs are explained. Surgical differences in the amount of alveolectomy are illustrated. One clinical case is demonstrated. A new classification system for maxillary implant fixed complete dentures is presented. The new system will serve as an improved communication aid for clinicians, patients, and laboratory technicians. Treatment of patients with edentulous maxillae and/or terminal dentitions and implant fixed complete dentures include several options relative to design and materials. Restorative space can have a major impact on prosthesis design and longevity. Early on in dental implant therapy, prostheses were generally made with cast metal frameworks, denture bases and denture teeth. Prosthetic complications were widely reported. With increased clinical experience and improved materials, computer-aided design and computer-aided manufacturing (CAD-CAM) protocols were developed that allowed stronger prostheses to be constructed in reduced or small restorative volumes. FP-1 ceramic implant-supported fixed prostheses (CISFPs) are designed to replace only the dental hard tissues and to promote preservation and rehabilitation of gingival soft tissues. The physical properties and minimum thickness requirements in full arch prostheses are influenced by several factors including distances between implants and rigid connector sizes. FP-1 CISFPs may be the closest prostheses the profession can offer edentulous patients that mimic the look, feel, and function of missing dentitions. Aesthetic outcomes of FP-1 CISFPs are variable and depend on a multitude of factors. This article presented a classification system that builds on existing classification by identifying the level of papilla heights achieved with FP-1 CISFPs.

Urologic prosthetics: an imaging review of short- and long-term complications.

Urologic prosthetics offer significant quality of life enhancements for patients with stress urinary incontinence and erectile dysfunction. Artificial urinary sphincter and penile prosthesis are the most commonly used prosthetics for these patients. Radiographic imaging offers important insight, guiding treatment when patients present with complications. Herein, we pictorialize normal radiographic findings and complications alike. We reviewed our IRB-approved prosthetics database, highlighting patients with prosthetic complications with available imaging. We collected imaging from patients without complications for baseline reference. The radiographic appearance of orthotopic genitourinary prosthetics and a review of short- and long-term complications including hematoma, infection, malpositioning, leak and erosion are pictorialized. Radiologic imaging serves as a vital complement to history and physical examination, aiding in the identification of complications and potentially streamlining surgical preparations. It is important for radiologists to familiarize themselves with standard prosthetic nomenclature, normal positioning and appearance, along with imaging findings of common complications.

Additive Manufacturing Titanium Dental Implants Placed in Sinuses Grafted with 70HA:30-TCP: A One-Year Retrospective Study for Evaluation of Survival Rate.

The present short-term retrospective study evaluated the implant survival rate and peri-implant bone loss around additive-manufactured titanium implants placed in sinuses grafted with Plenum Osshp (Plenum Bioengenharia, Jundia, SP, Brazil) (70HA:30β-TCP) material. A total of 39 implants were inserted after 23 sinus floor elevation procedures in 16 consecutive patients. Prosthetic rehabilitation included fixed partial prostheses (three units), single crowns (eleven units), and fixed full arches (three units). Clinical and radiographic parameters of implant-supported restorations were evaluated after at least one year of occlusal loading. The implant-crown success criteria included the absence of pain, suppuration, and clinical mobility, an average distance between the implant shoulder and the first visible bone contact (DIB) < 1.0 mm from the initial surgery, and the absence of prosthetic complications at the implant-abutment interface. The overall cumulative implant survival rate was 97.43%. No prosthetic complications at the implant-abutment interface were reported. After one year, the mean DIB was 0.23 mm ± 0.14. Within the limits of this retrospective study, it can be concluded that 70 HA:30 β-TCP allowed stable and reliable bone support to maintain healthy conditions around titanium dental implants produced by additive manufacturing.

3D virtual patient-Magnetically retained printed stackable system for implant guided placement: Case report.

The aim of this report is to present the complete workflow of 3D virtual patient for planning and performing implant surgery with magnetically retained 3D-printed stackable guides. A 3D-printed stackable system was proposed based on bone, dental, and facial references. Initially, a 66-year-old male patient was digitalized through photographs, cone beam computed tomography, and intraoral scans (Virtuo Vivo, Straumann). All files were merged to create a 3D virtual patient in the planning software (coDiagnostiX, Straumann). Sequential stackable guides were designed, printed, and cured. Magnets were inserted into connectors, and the interim protheses received color characterization. Four mounted guides were produced for the specific purposes of pin fixation, bone reduction, implant placement, and immediate provisionalization. After surgery and healing period, patient digital data were updated. Final implantpositions were compared to planned values and inconsistencies were clinically acceptable. The mean angular deviation was 5.4° (3.2-7.3) and mean 3D discrepancies were of 0.90 mm (0.46-1.12) at the entry point and 1.68 mm (1.00-2.20) at implant apex. Case follow-up revealed stability, patient's comfort, and no intercurrences. Magnetically retained stackable guides provide treatment accuracy and reduce surgical and prosthetic complications. The projected virtual patient enhances decision-making and communication between the multidisciplinary team and the patient, while decreases time and costs. Bidimensional diagnosis and freehand implant placement have limitations and outcomes often rely on professionals' expertise. Performing facially driven virtual planning improves treatment predictability. This approach promotes function, esthetic harmony, and patient satisfaction. Implant guided surgery and 3D printed prostheses constitute a reproducible digital workflow that can be implemented into clinical practice to optimize dental care.

Clinical Performance of 170 Frictional Morse Taper Implants: 2 Years Follow-Up.

This study evaluated the clinical survival rates of 170 Morse taper implants through clinical and mechanical parameters in different therapeutic approaches such as single crowns, fixed partial prostheses, and fixed full-arch prostheses. Patients referred to the Center on Education and Research on Dental Implants from May 2017 to July 2018 with the indication for dental implant therapy, aged >18 years, without periodontal disease, recent evidence of inflammatory activity or other oral disorders, current pregnancy, uncontrolled diabetes mellitus or heavy smoking habit were included in this study. After 12 weeks of healing since the implants were placed in the mandible and after 16 weeks following implants placed in the maxilla, patients returned to the Center for prosthetic rehabilitation. After implant therapy, all patients underwent periodical, clinical, and prosthetic examinations every 6 months. Prosthetic restorations involved 109 fixed reconstructions in function. Few prosthetic complications were reported (6.55%). Twenty implants were rehabilitated with cemented prostheses; from those, 1 crown suffered a loss in retention/decementation. Of the 148 implants rehabilitated with screwed-retained prostheses, 6.76% suffered prosthetic screw loosening. The cumulative implant survival rate was 98.2%. When peri-implant tissue health was evaluated, the keratinized mucosa band appeared related to peri-implant tissue stability. Thus, Morse taper implants represented a successful procedure for implant rehabilitation, with a high cumulative implant survival rate, low prevalence of biological and prosthetic complications, and good stability of peri-implant tissues over the assessed period.

Automated Identification of Dental Implants: A New, Fast and Accurate Artificial Intelligence System.

Prosthetic complications that occur to some implant prosthetics may require removal of the prosthesis for replacement or repair. Therefore, the presence of a technique to identify the type of dental implant is mandatory to provide the suitable components. Hence, the aim of the current study was to evaluate the accuracy of YOLOv8 object detection algorithm in automatic identification of the type of dental implant from digital periapical radiographs. YOLOv8m-seg object detection algorithm was used to build a model to automatically identify the type of dental implant. A set of 2573 digital periapical radiographs for six distinct dental implants manufacturers were used to train the model. The outcomes were evaluated using precision, recall, F1 score and mAP. The overall accuracy of the YOLOv8m-seg model in terms of precision, recall, F1 score and mAP revealed values of 0.919, 0.98, 0.95 and 0.972 respectively. The average detection speed of the images was 1.3 seconds. The model was able to detect and identify multiple implants simultaneously on the same image. YOLOv8m-seg object detection algorithm is promising in identification of dental implants from periapical radiographs with high detection accuracy (97.2%), fast detection results and multi-implant detection from the same image. This AI system can accurately identify the type of osseointegrated dental implants enabling dentists to provide the appropriate prosthetic components even if different implant systems are used within the same patient. This can save tremendous amounts of time, effort and cost for both the dentist and the patient.

Effectiveness of zygomatic-implant fixed rehabilitation for the atrophic edentulous maxilla: protocol for a systematic review and network meta-analysis

BackgroundAtrophic edentulous maxilla is a debilitating condition caused by the progressive and irreversible bone resorption following loss of teeth, that results in bone of inadequate volume and density. This makes conventional implant therapy extremely challenging without complex reconstructive procedures. Several techniques such as sinus augmentation, short implants, and tilted implants have been used for the rehabilitation of the atrophic maxilla. In recent years, zygomatic implants have emerged as a graftless rehabilitation technique. However, few studies compare zygomatic-implant fixed rehabilitation with other fixed rehabilitation techniques. The existing body of evidence on zygomatic implants is largely based on clinical and disease-oriented outcomes.MethodsA network meta-analysis (NMA) will be conducted in order to compare the effectiveness of zygomatic-implant fixed rehabilitation with the other rehabilitation techniques. Experimental and observational studies comparing different implant-assisted fixed rehabilitation in adults with atrophic maxilla will be included. The primary and secondary outcomes will be patient’s satisfaction and quality of life respectively. Additional outcomes include the implant’s survival/success, and biological and prosthetic complications. An electronic search will be performed through various databases for articles in English and French, without time limits. Risk of bias will be assessed using the Revised Cochrane Risk-of-Bias tool for randomized controlled trials, and ROBINS-I for non-randomized and observational studies. Two independent reviewers will screen the titles and abstracts and extract data. Any discrepancy between reviewers will be discussed and resolved through consensus or with the help of a third reviewer.Pairwise meta-analyses will be performed using a random effects model. I2, τ2, transitivity, subgroup/meta-regression analyses will assess and explain heterogeneity and distribution of effect modifiers. A network plot will be created to connect the different interventions directly and indirectly. Interventions will be ranked using the surface under cumulative ranking curve. Confidence in the results of the NMA will be assessed using the Grading of Recommendations Assessment, Development and Evaluation (GRADE).DiscussionThis study will be the first to assess the effectiveness of zygomatic-implant fixed rehabilitation for the atrophic maxilla using NMA. The evidence obtained will aid clinical decision-making and will advance the knowledge of the rehabilitation techniques for the atrophic maxilla.Systematic review registrationPROSPERO CRD42023353303.

Implant stability and clinical outcome between implant placement using internal sinus floor elevation with alloplastic bone material grafting and without grafting: A 1-year randomized clinical trial.

To compare implant stability and clinical outcome in implant placement between osteotome sinus floor elevation (OSFE) with biphasic calcium phosphate (BCP) which consisted of 30% of hydroxyapatite (HA) and 70% of beta-tricalcium phosphate (β -TCP) grafting material and OSFE without using bone grafting material. The research questions is whether the BCP provides any benefit in OSFE or not. Thirty patients (30 implants) with a single edentulous area of upper premolar or molar were randomly separated into OSFE with BCP (n = 15) and OSFE without grafting (n = 15). The patients were reevaluated 3, 6, 9, and 12months after implant loading. The clinical assessments (implant stability quotient (ISQ), implant survival-failure rate, and surgical complication) were analyzed. Together with radiographic assessments in 2D (endo-sinus bone gain (ESBG), mean marginal bone change (MMBC)) and 3D (endo-sinus bone gain in CBCT (ESBG-CT)) were evaluated, with a mean follow-up time of at least 12months of functional loading and prosthetic complication. 20 remaining implants (OSFE with BCP, n = 10; OSFE without grafting, n = 10) were analyzed. Mean ISQ was 79.18 3.43 in 1-year follow-up (ISQ; OSFE with BCP = 78.72 3.46, OSFE without grafting = 79.65 3.52). ISQ in both groups increased steadily without significant differences in each follow-up. (p = 0.56). In radiographic evaluation, at 6-, 9-, and 12-month, OSFE without grafting group showed statistically significant lower MMBC (p < 0.05). The 1-year clinical results showed that 2 implants failed in OSFE with BCP, and 1 implant failed in OSFE without grafting. Graft material "BCP" (HA30:TCP70) coupled with OSFE presents no extraordinary benefit in implant stability, clinical and radiographic outcome in 1-year follow-up. Clinically, OSFE with grafting materials provides no additional benefit. TCTR20210517008 (date of registration: May 17, 2021).

Short (≤6 mm) compared with ≥10-mm dental implants in different clinical scenarios: A systematic review of randomized clinical trials with meta-analysis, trial sequential analysis and quality of evidence grading.

To systematically identify, synthesize and critically summarize the available scientific evidence from randomized controlled trials (RCTs) regarding whether short (≤6 mm) perform as well as long (≥10 mm) implants regarding implant survival, marginal bone loss, and biologic and prosthetic complications in different clinical scenarios. Cochrane Collaboration's risk of bias tool and the GRADE approach were applied. Results were synthesized using random-effects meta-analyses assessed by trial sequential analyses. Forty reports on 19 RCTs comprising 2214 (1097 short; 1117 long) implants were included. Moderate/high certainty/quality evidence demonstrated similar 5-year survival rates for ≤6-mm and ≥10-mm implants in non-augmented bone and full-mouth rehabilitation in either jaw, and for 6-mm implants in the maxilla instead of sinus lift. Nevertheless, the evidence for 5-year survival rates remains inconclusive or insufficient for the remaining combinations of implant lengths and clinical scenarios. They include 4-mm and 5-mm implants as alternatives to sinus lift as well as placing all implant lengths ≤6 mm instead of vertical ridge augmentation with long implants. Marginal bone level and short- and long-term biologic or prosthetic complications were similar. Based on moderate/high certainty/quality evidence from 5-year RCTs, implants ≤6 mm may be viable alternatives to ≥10-mm implants in either jaw in native bone and full-arch rehabilitation, and 6-mm implants may be used as an alternative to sinus lift. PROSPERO ID: CRD42021254365.