Proposed Method Research Articles

Segmentation Method of Concrete Small Cracks Based on UAV Images

Introduction:: Cracks are one of the major problems in modern concrete buildings, especially in locations that are difficult to map manually, such as bridges and high-rise buildings. Accurate analysis of unmanned aerial vehicle (UAV) images has become the key to determining whether a building needs maintenance. Methods:: Traditional image processing methods are easily interfered by high-frequency background. Neural network methods need fine datasets, which increase labor costs. Therefore, this paper proposes a segmentation algorithm based on UNet3+ network. After obtaining the UAV image, the rough location of the crack can be obtained by only rough labeling. And then, the sample balance can be carried out by clipping the target area. The UNet3+ network is used to train the processed datasets and extract the region of interest to ignore the non-target texture. Finally, the region of interest is further segmented by color clustering and edge detection methods. Results:: The proposed method can detect the cracks accurately. In all test images, the relative errors are less than 13%. Especially in test images whose width is less than 0.2mm, the maximum absolute error is only 0.0237mm, which is completely acceptable in actual production. The proposed method has higher practicability in the detection of concrete crack images taken by UAV. The results show that the proposed method outperforms the cutting-edge method published in the journal "Sensor", when the background is complex. Conclusion:: The proposed method can segment and detect cracks effectively, which can remove the high-frequency interference region from the images.

An Identification Method for Anomaly Types of Active Distribution Network Based on Data Mining

With the increasing penetration of distributed generators (DGs) and the growing demand for reliable power sources, it has become imperative to promptly identify anomalies in active distribution networks (ADNs). Additionally, anomaly identification is also crucial to assisting in targeting maintenance to handle failures after the action of relay protections. This study presents a highly accurate and rapidly responsive approach to identifying anomalies in ADNs. The proposed method uses three layers of intricately interconnected modules. In the first module, an iterative clustering layer is devised to process the original data. In the second module, an association rule layer is designed to identify hidden patterns based on the types of anomalies and the post-fault voltage. In the third module, a regression training layer is employed to train accurate identification models. The case study utilizes data samples collected by an IEEE 33-bus system with distributed generations as well as post-fault data from a practical distribution network. The results of comparative tests demonstrate that the proposed data-mining structure achieves reliable performance with high identification accuracy and short reaction times, indicating its ability to be applied to the state awareness system of ADNs.

Multimodal Medical Image Fusion based on the VGG19 Model in the NSCT Domain

Aim: To deal with the drawbacks of the traditional medical image fusion methods, such as the low preservation ability of the details, the loss of edge information, and the image distortion, as well as the huge need for the training data for deep learning, a new multi-modal medical image fusion method based on the VGG19 model and the non-subsampled contourlet transform (NSCT) is proposed, whose overall objective is to simultaneously make the full use of the advantages of the NSCT and the VGG19 model. Methodology: Firstly, the source images are decomposed into the high-pass and low-pass subbands by NSCT, respectively. Then, the weighted average fusion rule is implemented to produce the fused low-pass sub-band coefficients, while an extractor based on the pre-trained VGG19 model is constructed to obtain the fused high-pass subband coefficients. Result and Discussion: Finally, the fusion results are reconstructed by the inversion transform of the NSCT on the fused coefficients. To prove the effectiveness and the accuracy, experiments on three types of medical datasets are implemented. Conclusion: By comparing seven famous fusion methods, both of the subjective and objective evaluations demonstrate that the proposed method can effectively avoid the loss of detailed feature information, capture more medical information from the source images, and integrate them into the fused images.

Short Step Length Estimation for Parkinson's Disease Patients by Using Fusion Data From Camera-IMU in Smart Glasses.

Shortened step length is a prominent motor abnormality in Parkinson's disease (PD) patients. Current methods for estimating short step length have the limitation of relying on laboratory scenarios, wearing multiple sensors, and inaccurate estimation results from a single sensor. In this paper, we proposed a novel method for estimating short step length for PD patients by fusing data from camera and inertial measurement units in smart glasses. A simultaneous localization and mapping technique and acceleration thresholding-based step detection technique were combined to realize the step length estimation. Two sets of experiments were conducted to demonstrate the performance of our method. In the first set of experiments with 12 healthy subjects, the proposed method demonstrated an average error of 8.44% across all experiments including six fixed step lengths below 30 cm. The second set of straightly walking experiments were implemented with 12 PD patients, the proposed method exhibited an average error of 4.27% compared to a standard gait evaluation technique in total walking distance. Notably, among the results of step lengths below 40 cm, our method agreed with the standard technique (R 2=0.8659). This study offers a promising approach for estimating short step length for PD patients during smart glasses-based gait training.

Intelligent Decision Support System in Healthcare using Machine Learning Models

Background: The use of intelligent decision support systems (IDSS) is widespread in the healthcare industry, particularly for real-time data, client and family history datasets, and prevalent patient features. Objective: A massive chunk of various kinds of health data sets, including sensor information, medical evidence, and omic statistics, are produced by the modern techniques in this field and eventually transferred to a machine learning (ML) element for extracting data, categorization, as well as mining. Method: In recent times, many patents have been focused on healthcare monitoring; however, they do not adequately incorporate appropriate algorithms for data collection, analysis, and prediction. The data collected is used for predictive modelling, then additionally, machine learning techniques are assisting to compare acquired datasets mathematically for decision-making platforms that may learn to recognise the recent trend and anticipated future problems. Depending on the dataset type, ML-based techniques can assess the circumstances. Training datasets are crucial for correctly anticipating both current and emerging events as well as new challenges. Results: Since the importance of data acquisition determines how well learning models function, any deformed data of the types of dirty data, noisy data, unstructured data, and inadequate information results in inaccurate detection, estimate, and prediction. Conclusion: Additionally, in contrast to other approaches, the experimental findings demonstrate the usefulness of the proposed method as a widespread implementation of machine learning algorithms within healthcare systems.

Tensor Completion for Alzheimer's Disease Prediction From Diffusion Tensor Imaging.

Alzheimer's disease (AD) is a slowly progressive neurodegenerative disorder with insidious onset. Accurate prediction of the disease progression has received increasing attention. Cognitive scores that reflect patients' cognitive status have become important criteria for predicting AD. Most existing methods consider the relationship between neuroimages and cognitive scores to improve prediction results. However, the inherent structure information in interrelated cognitive scores is rarely considered. In this article, we propose a relation-aware tensor completion multitask learning method (RATC-MTL), in which the cognitive scores are represented as a third-order tensor to preserve the global structure information in clinical scores. We combine both tensor completion and linear regression into a unified framework, which allows us to capture both inter and intra modes correlations in cognitive tensor with a low-rank constraint, as well as incorporate the relationship between biological features and cognitive status by imposing a regression model on multiple cognitive scores. Compared to the single-task and state-of-the-art multi-task algorithms, our proposed method obtains the best results for predicting cognitive scores in terms of four commonly used metrics. Furthermore, the overall performance of our method in classifying AD progress is also the best. Our results demonstrate the effectiveness of the proposed framework in fully exploring the global structure information in cognitive scores. This study introduces a novel concept of leveraging tensor completion to assist in disease diagnoses, potentially offering a solution to the issue of data scarcity encountered in prolonged monitoring scenarios.

SMART: Syntax-Calibrated Multi-Aspect Relation Transformer for Change Captioning.

Change captioning aims to describe the semantic change between two similar images. In this process, as the most typical distractor, viewpoint change leads to the pseudo changes about appearance and position of objects, thereby overwhelming the real change. Besides, since the visual signal of change appears in a local region with weak feature, it is difficult for the model to directly translate the learned change features into the sentence. In this paper, we propose a syntax-calibrated multi-aspect relation transformer to learn effective change features under different scenes, and build reliable cross-modal alignment between the change features and linguistic words during caption generation. Specifically, a multi-aspect relation learning network is designed to 1) explore the fine-grained changes under irrelevant distractors (e.g., viewpoint change) by embedding the relations of semantics and relative position into the features of each image; 2) learn two view-invariant image representations by strengthening their global contrastive alignment relation, so as to help capture a stable difference representation; 3) provide the model with the prior knowledge about whether and where the semantic change happened by measuring the relation between the representations of captured difference and the image pair. Through the above manner, the model can learn effective change features for caption generation. Further, we introduce the syntax knowledge of Part-of-Speech (POS) and devise a POS-based visual switch to calibrate the transformer decoder. The POS-based visual switch dynamically utilizes visual information during different word generation based on the POS of words. This enables the decoder to build reliable cross-modal alignment, so as to generate a high-level linguistic sentence about change. Extensive experiments show that the proposed method achieves the state-of-the-art performance on the three public datasets.

Optimization of Energy Consumption in Formaldehyde Production Process Using Reboiled Absorption Process

Formaldehyde is a crucial chemical building block in various industries, and its production often involves energy-intensive processes. This study focuses on optimizing energy consumption in formaldehyde production, explicitly employing the reboiled absorption process with a production capacity of 27,000 tons per year. The objective of this article is to develop a more energy-efficient process of formaldehyde synthesis by addition or refrigerant cycle stream to preserve the energy, reducing energy consumption and improving the sustainability of the process. The reboiled absorption process involves the absorption of formaldehyde gas into a liquid absorbent, followed by reboiling to release the absorbed formaldehyde. A comprehensive analysis of the entire production system compares unmodified and modified process simulations, heat integration, and energy analysis. Beside the energy consumption of the process, the number of stages within the absorption process contributes to the product mass flow rate of the overall process by increasing the surface area which mass transfer can occur. However, adding too many stages to the process may negatively impact the energy efficiency of the process. Therefore, optimizing energy consumption and absorption processes in formaldehyde production is essential to improve the sustainability of the process and increase the overall profitability of the production process. The results show that the proposed method dramatically improves the sustainability of CH2O synthesis by reducing overall energy consumption and emissions by 93.978%, reducing energy consumption from 153,735,360.4 kJ/h to 9,256,646.618 kJ/h. Copyright © 2024 by Authors, Published by Universitas Diponegoro and BCREC Publishing Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0).

Evaluation of Cd, Hg, Pb, Zn and Ni in selected cosmetic products: risk assessment for human health

ABSTRACT The ICP-MS method was used to determine the concentrations of five heavy metals: Cadmium (Cd), lead (Pb), zinc (Zn), mercury (Hg), and nickel (Ni). A total of 36 samples of cosmetic products (makeup, eye shadow, and mascara) of various brands were chosen from those available in Riyadh, Saudi Arabia. Several analytical parameters, such as accuracy, precision, linearity, the lower limit of quantification (LOQ), and the lower limit of detection (LOD), were assessed to determine the validity of the proposed method. The determination of Cd, Pb, Zn, Hg, and Ni was verified for accuracy and precision. The results of the determination of studied heavy metals concentration in cosmetic samples reveal that, the concentrations of Cd, Pb, Zn, Hg and Ni ranged from 0.03–0.53, 10.28–107.01, 14.49–867.12, 1.75–6.45 and 4.22–31.36 µg/g, respectively. In all samples of cosmetic products, the concentrations of Cd and Hg were deemed to be within the normal range. However, the concentration of Pb was higher than the recommended value by the World Health Organization (WHO). Nickel concentration was measured with a detection limit lower than the WHO recommended level, but no suggested value for Zn, which is critical for mitochondria, was found. Health risks related to these metal intakes through dermal exposure pathways are assessed using the total hazard quotient (THQs), total hazard index (HI), chronic daily intake (CDI), and hazard quotient (HQ). Despite the low risks of cancer and non-cancer caused by using these cosmetic products, testing results for cancer and non-cancer risks for these products must be regularly examined. Therefore, constant monitoring of cosmetic products, particularly with regard to heavy metal contamination, should be implemented to maintain human safety and security.

Multi-Parametric Molecular Imaging of the Brain Using Optimized Multi-TE Subspace MRSI.

To develop a novel multi-TE MR spectroscopic imaging (MRSI) approach to enable label-free, simultaneous, high-resolution mapping of several molecules and their biophysical parameters in the brain. The proposed method uniquely integrated an augmented molecular-component-specific subspace model for multi-TE 1H-MRSI signals, an estimation-theoretic experiment optimization (nonuniform TE selection) for molecule separation and parameter estimation, a physics-driven subspace learning strategy for spatiospectral reconstruction and molecular quantification, and a new accelerated multi-TE MRSI acquisition for generating high-resolution data in clinically relevant times. Numerical studies, phantom and in vivo experiments were conducted to validate the optimized experiment design and demonstrate the imaging capability offered by the proposed method. The proposed TE optimization improved estimation of metabolites, neurotransmitters and their T2's over conventional TE choices, e.g., reducing variances of neurotransmitter concentration by ∼ 40% and metabolite T2 by ∼ 60%. Simultaneous metabolite and neurotransmitter mapping of the brain can be achieved at a nominal resolution of 3.4 × 3.4 × 6.4 mm 3. High-resolution, 3D metabolite T2 mapping was made possible for the first time. The translational potential of the proposed method was demonstrated by mapping biochemical abnormality in a post-traumatic epilepsy (PTE) patient. The feasibility for high-resolution mapping of metabolites/neurotransmitters and metabolite T2's within clinically relevant time was demonstrated. We expect our method to offer richer information for revealing and understanding metabolic alterations in neurological diseases. A novel multi-TE MRSI approach was presented that enhanced the technological capability of multi-parametric molecular imaging of the brain. The proposed method presents new technology development and application opportunities for providing richer molecular level information to uncover and comprehend metabolic changes relevant in various neurological applications.

Parameter-Efficient Person Re-Identification in the 3D Space.

People live in a 3D world. However, existing works on person re-identification (re-id) mostly consider the semantic representation learning in a 2D space, intrinsically limiting the understanding of people. In this work, we address this limitation by exploring the prior knowledge of the 3D body structure. Specifically, we project 2D images to a 3D space and introduce a novel parameter-efficient omni-scale graph network (OG-Net) to learn the pedestrian representation directly from 3D point clouds. OG-Net effectively exploits the local information provided by sparse 3D points and takes advantage of the structure and appearance information in a coherent manner. With the help of 3D geometry information, we can learn a new type of deep re-id feature free from noisy variants, such as scale and viewpoint. To our knowledge, we are among the first attempts to conduct person re-id in the 3D space. We demonstrate through extensive experiments that the proposed method: (1) eases the matching difficulty in the traditional 2D space; 2) exploits the complementary information of 2D appearance and 3D structure; 3) achieves competitive results with limited parameters on four large-scale person re-id datasets; and 4) has good scalability to unseen datasets. Our code, models, and generated 3D human data are publicly available at https://github.com/layumi/person-reid-3d.

Fuzzy Attention Neural Network to Tackle Discontinuity in Airway Segmentation.

Airway segmentation is crucial for the examination, diagnosis, and prognosis of lung diseases, while its manual delineation is unduly burdensome. To alleviate this time-consuming and potentially subjective manual procedure, researchers have proposed methods to automatically segment airways from computerized tomography (CT) images. However, some small-sized airway branches (e.g., bronchus and terminal bronchioles) significantly aggravate the difficulty of automatic segmentation by machine learning models. In particular, the variance of voxel values and the severe data imbalance in airway branches make the computational module prone to discontinuous and false-negative predictions, especially for cohorts with different lung diseases. The attention mechanism has shown the capacity to segment complex structures, while fuzzy logic can reduce the uncertainty in feature representations. Therefore, the integration of deep attention networks and fuzzy theory, given by the fuzzy attention layer, should be an escalated solution for better generalization and robustness. This article presents an efficient method for airway segmentation, comprising a novel fuzzy attention neural network (FANN) and a comprehensive loss function to enhance the spatial continuity of airway segmentation. The deep fuzzy set is formulated by a set of voxels in the feature map and a learnable Gaussian membership function. Different from the existing attention mechanism, the proposed channel-specific fuzzy attention addresses the issue of heterogeneous features in different channels. Furthermore, a novel evaluation metric is proposed to assess both the continuity and completeness of airway structures. The efficiency, generalization, and robustness of the proposed method have been proved by training on normal lung disease while testing on datasets of lung cancer, COVID-19, and pulmonary fibrosis.

GRLC: Graph Representation Learning With Constraints.

Contrastive learning has been successfully applied in unsupervised representation learning. However, the generalization ability of representation learning is limited by the fact that the loss of downstream tasks (e.g., classification) is rarely taken into account while designing contrastive methods. In this article, we propose a new contrastive-based unsupervised graph representation learning (UGRL) framework by 1) maximizing the mutual information (MI) between the semantic information and the structural information of the data and 2) designing three constraints to simultaneously consider the downstream tasks and the representation learning. As a result, our proposed method outputs robust low-dimensional representations. Experimental results on 11 public datasets demonstrate that our proposed method is superior over recent state-of-the-art methods in terms of different downstream tasks. Our code is available at https://github.com/LarryUESTC/GRLC.

Spatio-Temporal Graph Hubness Propagation Model for Dynamic Brain Network Classification.

Dynamic brain network has the advantage over static brain network in characterizing the variation pattern of functional brain connectivity, and it has attracted increasing attention in brain disease diagnosis. However, most of the existing dynamic brain networks analysis methods rely on extracting features from independent brain networks divided by sliding windows, making them hard to reveal the high-order dynamic evolution laws of functional brain networks. Additionally, they cannot effectively extract the spatio-temporal topology features in dynamic brain networks. In this paper, we propose to use optimal transport (OT) theory to capture the topology evolution of the dynamic brain networks, and develop a multi-channel spatio-temporal graph convolutional network that collaboratively extracts the temporal and spatial features from the evolution networks. Specifically, we first adaptively evaluate the graph hubness of brain regions in the brain network of each time window, which comprehensively models information transmission among multiple brain regions. Second, the hubness propagation information across adjacent time windows is captured by optimal transport, describing high-order topology evolution of dynamic brain networks. Moreover, we develop a spatio-temporal graph convolutional network with attention mechanism to collaboratively extract the intrinsic temporal and spatial topology information from the above networks. Finally, the multi-layer perceptron is adopted for classifying the dynamic brain network. The extensive experiment on the collected epilepsy dataset and the public ADNI dataset show that our proposed method not only outperforms several state-of-the-art methods in brain disease diagnosis, but also reveals the key dynamic alterations of brain connectivities between patients and healthy controls.

High-Dimensional MR Reconstruction Integrating Subspace and Adaptive Generative Models.

To develop a new method that integrates subspace and generative image models for high-dimensional MR image reconstruction. We proposed a formulation that synergizes a low-dimensional subspace model of high-dimensional images, an adaptive generative image prior serving as spatial constraints on the sequence of "contrast-weighted" images or spatial coefficients of the subspace model, and a conventional sparsity regularization. A special pretraining plus subject-specific network adaptation strategy was proposed to construct an accurate generative-network-based representation for images with varying contrasts. An iterative algorithm was introduced to jointly update the subspace coefficients and the multi-resolution latent space of the generative image model that leveraged an recently proposed intermediate layer optimization technique for network inversion. We evaluated the utility of the proposed method for two high-dimensional imaging applications: accelerated MR parameter mapping and high-resolution MR spectroscopic imaging. Improved performance over state-of-the-art subspace-based methods was demonstrated in both cases. The proposed method provided a new way to address high-dimensional MR image reconstruction problems by incorporating an adaptive generative model as a data-driven spatial prior for constraining subspace reconstruction. Our work demonstrated the potential of integrating data-driven and adaptive generative priors with canonical low-dimensional modeling for high-dimensional imaging problems.

Synthesis, Characterization, and Optimization of Novel Furan-ring Fused Chalcones via Radical Cyclization of α,β-Unsaturated Ketones and Cyclic Ketone

Abstract: Novel Furan-ring Fused Chalcones (FFC) were synthesized using a radical cyclization reaction of α,β-unsaturated ketones with cyclic ketone as the model reaction to attain this goal. In this study, traditional and microwave-assisted methods for the efficient and cost-effective synthesis of furan-ring fused chalcones in mild reaction conditions are compared and optimized. The goal is to develop a reliable and adaptable synthetic technique that may be used to produce these useful chalcone derivatives quickly and effectively. The optimal experimental conditions for these reactions were carefully determined using two independent methodologies: conventional (Method A) and microwave (Method B). The results indicated that the proposed method B could be used effectively in the future to synthesize novel furans with short reaction times and acceptable yields (87-94 %), and products were purified by column chromatography and preparative thin layer chromatography (PTLC). All new compounds were characterized by 1H-NMR, 13C-NMR, LC-MS, and elemental analyses.

Observer-Based Boundary Stabilization of Coupled Semilinear Reaction-Diffusion Neural Networks With Spatially Varying Coefficients via Event-Triggered Controller.

The aim of this article is to propose an observer-based event-triggered Robin boundary control strategy for the exponential stabilization of the coupled semilinear reaction-diffusion neural networks with spatially varying coefficients. Toward this aim, we design an observer to estimate the value of system states by using some of these system values as the available measurement. An observer-based event-triggered boundary stabilizer is then presented to exponentially stabilize the considered systems with the Zeno behavior being excluded. Throughout this article, the main used method is backstepping, which yields an explicit expression of the control formulae. Moreover, we see that the proposed event-triggered boundary control scheme can ensure the desired level of control performance with fewer control law updates. A numerical example is finally given to illustrate the effectiveness of our proposed method.

Fast Bayesian Functional Regression for Non-Gaussian Spatial Data

Functional generalized linear models (FGLM) have been widely used to study the relations between non-Gaussian response and functional covariates. However, most existing works for FGLM assume independence among observations and therefore they are of limited applicability for correlated data. A particularly important example is spatial functional data, where we observe functions over spatial domains, such as the age population curve or temperature curve at each areal unit. In this paper, we extend FGLM by incorporating spatial random effects. Especially, we study the relationship between the non-Gaussian response variable and functional covariates that are spatially observed. However, such model has computational and inferential challenges. The high-dimensional spatial random effects cause the slow mixing of Markov chain Monte Carlo (MCMC) algorithms. Furthermore, spatial confounding can lead to bias in parameter estimates and inflate their variances. To address these issues, we propose an efficient Bayesian method using a sparse reparameterization of high-dimensional random effects. We also study the average coverage probabilities of the credible intervals of functional parameters. We apply our methods to simulated and real data examples, including malaria incidence data and US COVID-19 data. The proposed method is fast while providing accurate functional estimates.

Federated Learning via Plurality Vote.

Federated learning allows collaborative clients to solve a machine-learning problem while preserving data privacy. Recent studies have tackled various challenges in federated learning, but the joint optimization of communication overhead, learning reliability, and deployment efficiency is still an open problem. To this end, we propose a new scheme named federated learning via plurality vote (FedVote). In each communication round of FedVote, clients transmit binary or ternary weights to the server with low communication overhead. The model parameters are aggregated via weighted voting to enhance the resilience against Byzantine attacks. When deployed for inference, the model with binary or ternary weights is resource-friendly to edge devices. Our results demonstrate that the proposed method can reduce quantization error and converges faster compared to the methods directly quantizing the model updates.

Fourier Domain Robust Denoising Decomposition and Adaptive Patch MRI Reconstruction.

The sparsity of the Fourier transform domain has been applied to magnetic resonance imaging (MRI) reconstruction in k -space. Although unsupervised adaptive patch optimization methods have shown promise compared to data-driven-based supervised methods, the following challenges exist in MRI reconstruction: 1) in previous k -space MRI reconstruction tasks, MRI with noise interference in the acquisition process is rarely considered. 2) Differences in transform domains should be resolved to achieve the high-quality reconstruction of low undersampled MRI data. 3) Robust patch dictionary learning problems are usually nonconvex and NP-hard, and alternate minimization methods are often computationally expensive. In this article, we propose a method for Fourier domain robust denoising decomposition and adaptive patch MRI reconstruction (DDAPR). DDAPR is a two-step optimization method for MRI reconstruction in the presence of noise and low undersampled data. It includes the low-rank and sparse denoising reconstruction model (LSDRM) and the robust dictionary learning reconstruction model (RDLRM). In the first step, we propose LSDRM for different domains. For the optimization solution, the proximal gradient method is used to optimize LSDRM by singular value decomposition and soft threshold algorithms. In the second step, we propose RDLRM, which is an effective adaptive patch method by introducing a low-rank and sparse penalty adaptive patch dictionary and using a sparse rank-one matrix to approximate the undersampled data. Then, the block coordinate descent (BCD) method is used to optimize the variables. The BCD optimization process involves valid closed-form solutions. Extensive numerical experiments show that the proposed method has a better performance than previous methods in image reconstruction based on compressed sensing or deep learning.