Properties Of Oxide Research Articles

A dual model of normal vs isogenic Nrf2-depleted murine epithelial cells to explore oxidative stress involvement

Cancer-derived cell lines are useful tools for studying cellular metabolism and xenobiotic toxicity, but they are not suitable for modeling the biological effects of food contaminants or natural biomolecules on healthy colonic epithelial cells in a normal genetic context. The toxicological properties of such compounds may rely on their oxidative properties. Therefore, it appears to be necessary to develop a dual-cell model in a normal genetic context that allows to define the importance of oxidative stress in the observed toxicity. Given that the transcription factor nuclear factor erythroid 2-related factor 2 (Nrf2) is considered to be the master regulator of antioxidant defenses, our aim was to develop a cellular model comparing normal and Nrf2-depleted isogenic cells to qualify oxidative stress–related toxicity. We generated these cells by using the CRISPR/Cas9 technique. Whole-genome sequencing enabled us to confirm that our cell lines were free of cancer-related mutations. We used 4-hydroxy-2-nonenal (HNE), a lipid peroxidation product closely related to oxidative stress, as a model molecule. Here we report significant differences between the two cell lines in glutathione levels, gene regulation, and cell viability after HNE treatment. The results support the ability of our dual-cell model to study the role of oxidative stress in xenobiotic toxicity.

Gold core@CeO2 halfshell Janus nanocomposites catalyze targeted sulfate radical for periodontitis therapy

The sulfate radical (SO4•-), known for its high reactivity and long lifespan, has emerged as a potent antimicrobial agent. Its exceptional energy allows for the disruption of vital structures and metabolic pathways in bacteria that are usually inaccessible to common radicals. Despite its promising potential, the efficient generation of this radical, particularly through methods involving enzymes and photocatalysis, remains a substantial challenge. Here, we capitalized on the peroxidase (POD)-mimicking activity and photocatalytic properties of cerium oxide (CeO2) nanozymes, integrating these properties with the enhanced concept of plasma gold nanorod (GNR) to develop a half-encapsulated core@shell GNRs@CeO2 Janus heterostructure impregnated with persulfate. Under near-infrared irradiation, the GNRs generate hot electrons, thereby boosting the CeO2's enzyme-like activity and initiating a potent reactive oxygen species (ROS) storm. This distinct nanoarchitecture facilitates functional specialization, wherein the heterostructure and efficient light absorption ensured continuous hot electron flow, not only enhancing the POD-like activity of CeO2 for the production of SO4•- effectively, but also contributing a significant photothermal effect, disrupting periodontal plaque biofilm and effectively eradicating pathogens. Furthermore, the local temperature elevation synergistically enhances the POD-like activity of CeO2. Transcriptomics analysis, as well as animal experiments of the periodontitis model, have revealed that pathogens undergo genetic information destruction, metabolic disorders, and pathogenicity changes in the powerful ROS system, and profound therapeutic outcomes in vivo, including anti-inflammation and bone preservation. This study demonstrated that energy transfer to augment nanozyme activity, specifically targeting ROS generation, constitutes a significant advancement in antibacterial treatment.

Growth and Redox Properties of Boron on Al(111): Competing Affinities in the Case of Honeycomb AlB2.

The complexity of the geometric and electronic structure of boron allotropes is associated with the multicentric bonding character and the consequent B polymorphism. When growth is limited to two-dimensions (2D), the structural and electronic confinement yields the borophenes family, where the interaction with the templating substrate actually determines the stability of inequivalent boron phases. We report here a detailed study of the growth of the honeycomb AlB2 phase on Al(111), followed by an investigation of its oxidation and reduction properties. By means of a combined experimental and theoretical approach, we show that the structure of the B/Al interface is affected by the complex interplay between B, Al, and common reactive agents like oxygen and hydrogen. While kinetic effects associated with diffusion and strain release influence the AlB2 growth in vacuo, Al, B, O, and H chemical affinities determine its redox behavior. Reduction with atomic hydrogen involves the B layer and yields an ordered honeycomb borophane H/AlB2 phase. Instead, oxidation takes place at the Al interface, giving origin to buried and 1D surface aluminum oxide phases.

2-Butoxytetrahydrofuran, Isolated from Holothuria scabra, Attenuates Aggregative and Oxidative Properties of α-Synuclein and Alleviates Its Toxicity in a Transgenic Caenorhabditis elegans Model of Parkinson's Disease.

Aggregative α-synuclein and incurring oxidative stress are pivotal cascading events, leading to dopaminergic (DAergic) neuronal loss and contributing to clinical manifestations of Parkinson's disease (PD). Our previous study demonstrated that 2-butoxytetrahydrofuran (2-BTHF), isolated from Holothuria scabra (H. scabra), could inhibit amyloid-β aggregation and its ensuing toxicity, which leads to Alzheimer's disease. In the present study, we found that 2-BTHF also attenuated the aggregative and oxidative activities of α-synuclein and lessened its toxicity in a transgenic Caenorhabditis elegans (C. elegans) PD model. Such worms treated with 100 μM of 2-BTHF showed substantial reductions in α-synuclein accumulation and DAergic neurodegeneration. Mechanistically, 2-BTHF, at this concentration, significantly decreased aggregation of monomeric α-synuclein and restored locomotion and dopamine-dependent behaviors. Molecular docking exhibited potential bindings of 2-BTHF to HSF-1 and DAF-16 transcription factors. Additionally, 2-BTHF significantly increased the mRNA transcripts of genes encoding proteins involved in proteostasis, including the molecular chaperones hsp-16.2 and hsp-16.49, the ubiquitination/SUMOylation-related ubc-9 gene, and the autophagy-related genes atg-7 and lgg-1. Transcriptomic profiling revealed an additional mechanism of 2-BTHF in α-synuclein-expressing worms, which showed upregulation of PPAR signaling cascades that mediated fatty acid metabolism. 2-BTHF significantly restored lipid deposition, upregulated the fat-7 gene, and enhanced gcs-1-mediated glutathione synthesis in the C. elegans PD model. Taken together, this study demonstrated that 2-BTHF could abrogate aggregative and oxidative properties of α-synuclein and attenuate its toxicity, thus providing a possible therapeutic application for the treatment of α-synuclein-induced PD.

Enhancement and refinement of SSP method for XRD analysis and investigation of structural properties of pure and Ca-doped zinc oxide

Enhancement and refinement of SSP method for XRD analysis and investigation of structural properties of pure and Ca-doped zinc oxide

Photocatalytic Activity and Antibacterial Properties of Mixed-Phase Oxides on Titanium Implant Alloy Substrates

Titanium alloys are commonly used for implants, but the naturally forming oxides are bioinert and not ideal for bacterial resistance or osseointegration. Anodization processes are a modification technique that can crystallize the oxides, alter oxide surface topography, and introduce beneficial chemistries. Crystalline titanium oxides are known to exhibit photocatalytic activity (PCA) under UVA light. Anodization was used to create mixed-phase oxides on six titanium alloys including commercially pure titanium (CPTi), Ti-6Al-4V (TAV), Ti-6Al-7Nb (TAN), two forms of Ti-15Mo (TiMo-β and TiMo-αβ), and Ti-35Nb-7Zr-5Ta (TNZT). Combined EDS and XPS analyses showed uptake of the electrolyte and substrate alloying elements into the oxides. The relative oxide PCA was measured using methylene blue degradation assays. CPTi and TAN oxides exhibited increased PCA compared to other alloys. Combined XRD and EBSD oxide phase analyses revealed an unfavorable arrangement of anatase and rutile phases near the outermost surfaces, which may have reduced PCA for other oxides. The relative Staphylococcus aureus attachment to each oxide was also assessed. The CPTi and TiMo-αβ oxides showed significantly reduced S. aureus attachment after 1 h of UVA compared to un-anodized CPTi. Cell culture results verified that the UVA irradiation did not negatively influence the MC3T3-E1 attachment or proliferation on the mixed-phase oxides.

Recent Developments of Nanostructured Photocatalysts Based on Semiconducting Chalcogenides for Organic Reactions

Abstract:: The earth-abundant metal chalcogenide is a highly versatile semiconductor with unique electronic and optical properties that seem to outperform the photocatalytic properties of metal oxides and metal nanoparticles. For ages, researchers are reaping the benefits of its photocatalytic properties in numerous reactions. However, the high charge recombination rates, poor compositional stability, and a smaller number of catalytically active sites restrict its application. The development of different kinds of heterojunctions by the combination of metal-chalcogenides with other conducting and semiconducting materials like metal oxides, metal nanoparticles, g-C3N4, single-atom catalysts, and MOF results in superior photocatalytic activity. This review provides insight into the various classes of metal-chalcogenide-based heterostructures and their application in various organic transformations. A brief overview of the synergistic properties arising from the development of such heterostructures helps to understand the surface interactions so that highly stable, efficient, and selective metal-chalcogenide-based heterostructures can be developed for industrially important photocatalytic organic transformations. This review also describes the role of mediators in boosting the stability and catalytic efficiency of the metal chalcogenides. Moreover, a thorough emphasis on the morphological impact of photocatalysts in various reactions will help with the development of metal chalcogenide heterostructures with tunable morphology and bandgap.

Synaptic properties of GaOx-based memristor with amorphous GaOx deposited by RF magnetic sputtering

GaOx devices have been extensively explored for applications such as power devices and solar blind detectors, based on their wide bandgap. In this study, we investigated the synaptic properties of the amorphous gallium oxide (a-GaOx)- based memristor with a W/WOx/a-GaOx/ITO structure, in which a-GaOx are deposited by RF magnetic sputtering at ambient temperature. The structure and components of a-GaOx are characterized by XRD, XPS, SEM, and EDS. The electrical test indicates that W/WOx/a-GaOx is ohmic due to the thin WOx layer with a high concentration of oxygen vacancies. Consequently, the synaptic characteristics of the W/WOx/a-GaOx/ITO memristor depend on both the a-GaOx layer itself and the a-GaOx/ITO junction. The fitting results indicate that the a-GaOx/ITO junction is Schottky with unidirectional conductive properties. However, the elevated defect density results in a larger current for the reverse-biased a-GaOx/ITO junction. Moreover, adjusting the thickness of a-GaOx allows the device to achieve almost symmetrical forward and reverse currents. We have successfully observed typical synaptic characteristics in W/WOx/a-GaOx/ITO when stimulated by consecutive spike signals. Clearly, through careful design considerations regarding the structure and parameters, we have realized superior synaptic performance in a-GaOx-based memristors. This achievement shows that amorphous GaOx has great potential applications in neuromorphic computation chips for artificial intelligence or the Internet of Things in the future.

Three-dimensional ordered FeTe-SmCoO3 nanocomposite: As efficient electrocatalyst for water oxidation

In this work, FeTe-SmCoO3 is fabricated through a hydrothermal method and then coated on a stainless steel (SS) substrate to enhance the electrocatalytic performance. The crystal structure, surface chemical state, and morphological features of pure (FeTe and SmCoO3) and heterogeneous catalysts (FeTe-SmCoO3) are determined via XRD, XPS, and TEM/EDX techniques. The fabricated FeTe-SmCoO3 electrocatalyst is attributed to the particular morphological design resulting from the synergistic effect of FeTe and SmCoO3 phases. The as-developed high exposure level of active sites with structural transformation greatly promoted the oxidation property with an overpotential only of 199 mV to derive a current density of 10 mA/cm2, also observed a small Tafel slope of 72 mVdec−1 with extraordinary stability of 90 h. The modified heterogeneous catalyst provides outstanding catalytic behavior toward OER in the alkaline solution, due to flexibility and multiple accessible oxidation states of samarium, cobalt, and iron ions. The catalyst not only acquires additional reaction sites and opens up new channels through the dispersion of the metal centers, but also achieves quick electron transfer in FeTe-SmCoO3 nanocomposite through the interconnection between two phases.

Role of Semiconductive Property on Selective Cementation Mechanism of Iron Oxides to Gold in Galvanic Interaction with Zero-Valent Aluminum from Gold–Copper Ammoniacal Thiosulfate Solutions

Iron oxides (hematite, Fe2O3, and magnetite, Fe3O4), previously used as electron mediators in the galvanic system with zero-valent aluminum (ZVAl), have been shown to recover Au upon cementation in Au–Cu ammoniacal thiosulfate media selectively, and this warrants further investigation. This research is focused on investigating the role of the semiconductive properties of metal oxides by performing a cementation experiment by mixing 0.15 g of electron mediators (Fe3O4, Fe2O3, TiO2 (anatase and rutile)) and 0.15 g of zero-valent aluminum powder as an electron donor in various electrochemical experiments. The results revealed that upon the cementation experiment, synthetic Fe2O3 and Fe3O4 were consistently able to selectively recover Au at around 90% and Cu at around 20%. Compared to activated carbon (AC), TiO2, in anatase and rutile forms, obtained selective recovery of gold, but the recovery was utterly insignificant compared to that of iron oxides, obtaining an average of 93% Au and 63% Cu recovery. The electrochemical and surface analysis supports the results obtained upon the cementation process, where TiO2, upon cyclic voltammetry (CV), obtained two reduction peaks centered at −1.0 V and −0.5 V assigned to reducing Au and Cu ions, respectively. Furthermore, various electrochemical impedance spectroscopic analyses revealed that the flat band potential obtained in the Mott–Schottky plot is around −1.0 V and −0.2 V for iron oxides and titanium oxides, respectively, suggesting that the electrons travel from semiconductor interface to electrolyte interface, and electrons are accessible only to Au ions in the electrolyte interface (reduction band edge around −1.0 V). The determination of this selective cementation mechanism is one of a kind. It has been proposed that the semiconductive properties of Fe2O3, Fe3O4, and, by configuring their relative energy band diagram, the travel of electrons from the iron oxide–electrolyte interface facilitate the selective cementation towards Au(S2O3)23+ ions in gold–copper ammoniacal thiosulfate solutions.

Achieving excellent mechanical and electrical properties in transition metal oxides and rare earth oxide‐doped KNN‐based piezoceramics

AbstractPotassium sodium niobate (KNN)‐based piezoelectric ceramics have emerged as a promising alternative to lead‐based systems due to their exceptional properties. While extensive research has focused on improving the electrical properties of KNN‐based ceramics through doping and processing optimization, the concurrent investigation of their mechanical properties has been lacking. This study presents a comprehensive analysis of the mechanical and electrical properties of KNN‐based lead‐free piezoceramics doped with various transition metal oxides and rare earth oxides, based on substantial experimental data. Our findings reveal that the as‐sintered KNN‐based ceramics exhibit not only outstanding electrical properties but also remarkable mechanical robustness compared to conventional toughened lead zirconate titanate (PZT)‐based ceramics. These exceptional electrical and mechanical properties are attributed to the micro‐scale and atomic‐scale structure of the modified KNN‐based ceramics, characterized by a highly condensed structure, an inhomogeneous distribution of nano‐domain structure, and the presence of amorphous intergranular films at grain boundaries.

Investigating stress-induced effects on the multifaceted properties of cubic NaTaO3 perovskite oxide: prospects for advanced applications

This study explored the structural, optoelectronic, elastic, mechanical, and thermodynamic behaviour of NaTaO3 cubic perovskite oxide, under varying stress levels. Geometric property analysis reveals a decrease in lattice constants from 4.1 Å to 3.7 Å and cell volume from 71.1–53.4 Å3 as stress increases from 0 to 100 GPa. X-ray diffraction analysis indicated the stable cubic phase with slight peak shifts, demonstrating the material's structural flexibility. Electronic properties revealed an initial increase in the band gap (1.698 eV to 1.936 eV) with applied stress up to 60 GPa, which could be attributed to complex interactions within the material's electronic structure. Optical property analysis suggested that NaTaO3 possessed high optical absorption and conductivity, along with low reflectivity. Furthermore, elastic constants meeting the Born-stability condition (C11 – C12 > 0, C11 + 2C12 > 0, and C44 > 0) confirm the material's mechanical stability. Additional characteristics like the Poisson ratio, Cauchy pressure, and Frantsevich ratio highlighted the ductile and anisotropic nature of NaTaO3. Thermodynamic and phonon dispersion analysis suggested that NaTaO3 can withstand high-stress levels, evidenced by its elevated Debye temperature, indicating superior mechanical stability and increased resistance to thermal degradation. Based on these findings, NaTaO3 proposed as a potential candidate for photovoltaic and thermoelectric devices.

Ultrafast Optically Induced Perturbation of Oxygen Octahedral Rotations in Multiferroic BiFeO3 Thin Films.

The functional properties of complex oxides, including magnetism and ferroelectricity, are closely linked to subtle structural distortions. Ultrafast optical excitations provide the means to manipulate structural features and ultimately to affect the functional properties of complex oxides with picosecond-scale precision. We report that the lattice expansion of multiferroic BiFeO3 following above-bandgap optical excitation leads to distortion of the oxygen octahedral rotation (OOR) pattern. The continuous coupling between OOR and strain was probed using time-resolved X-ray free-electron laser diffraction with femtosecond time resolution. Density functional theory calculations predict a relationship between the OOR and the elastic strain consistent with the experiment, demonstrating a route to employing this approach in a wider range of systems. Ultrafast control of the functional properties of BiFeO3 thin films is enabled by this approach because the OOR phenomena are related to ferroelectricity, and via the Fe-O-Fe bond angles, the superexchange interaction between Fe atoms.

Evaluation of the effect of oxygen incorporation on the thermo–chemical–mechanical properties of the proton-conducting oxide BaZr0.8Yb0.2O3-δ

This study aims to evaluate the effects of multiple defect species produced by water and oxygen incorporation on the lattice parameters of BaZr0.8Yb0.2O3-δ (BZYb20) and model its chemical expansion considering these effects. In this study, the lattice constant of BZYb20 was investigated under oxygen partial pressure (pO2 = 1–10−3 bar), water vapor partial pressure (pH2O = 0.0023 bar and dry) and over a wide range of temperatures (473–1173 K) using two approaches: model calculations and high-temperature X-ray diffraction (HT-XRD). HT-XRD measurements revealed that the lattice expansion of BZYb20 changed within 700–900 K in a humidified atmosphere. In a nonhumidified atmosphere, this temperature range shifts lower. High-temperature gravimetric measurements of oxygen incorporation showed that the change in oxygen vacancy concentration was sufficiently small, and the effect of oxygen incorporation on the lattice constant was negligible. High-temperature gravimetric measurements of water incorporation yielded thermodynamic parameters for the hydration reaction. Based on these results, the HT-XRD results were reproduced by fitting a lattice constant model that neglects the effects of oxygen. Therefore, the effect of oxygen incorporation on chemical expansion can be ignored, and the chemical expansion can be estimated using the model developed in this study.

A Novel Potentiometric Coated Wire Sensor Based on Functionalized Polymeric CaO/ZnO Nanocomposite Synthesized by Lavandula Spica Mediated Extract for Terbinafine Determination

AbstractThe unique properties of calcium oxide (CaO) and zinc oxide (ZnO) at the nanoscale have attracted the interest of scientists as promising electrically conductive substances for sensing purposes. The content of terbinafine hydrochloride (TRF) in pharmaceutical tablets was determined using a novel coated, wire‐functionalized CaO/ZnO nanocomposite membrane sensor biogenically produced from Lavandula spica extract. Sodium tetraphenylborate was used to prepare the active material (TRF‐TBP). The newly modified sensor gave excellent potentiometric sensitivity with the least squares regression equation EmV=(−58.88X±0.3)+log [TRF]+549.78 and covered a wide linear range (5.0×10−9–1.0×10−2 mol/L) of TRF samples. In contrast, the standard TRF‐TBP sensor wasn't as sensitive when (2.5×10−6–1.0×10−2 mol/L). TRF solutions with regression equation of (−55.728X±0.7)+log [TRF]+396.64. The appropriate pH range was 3–6. The principles of analytical methodology were applied to investigate the validity and suitability of the proposed technique. The proposed sensors were found to be suitable and efficient for the detection of TRF on tablets.

Coupling interface constructions of flower-like structure MoSe2–NiWSe2 for efficient oxygen evolution reaction and urea oxidation reaction

Because of its low thermodynamic voltage, the electrocatalytic urea oxidation reaction (UOR) is an effective way to replace the sluggish oxygen evolution reaction (OER) and address the issue of urea-rich water pollution. Herein, we have synthesized MoSe2–NiWSe2 with spherical nanoflower structure consisting of MoSe2 nanosheets and NiWSe2 nanosheets crisscrossed longitudinally and transversely. The results show that the prepared MoSe2–NiWSe2 has a significant competitive advantage in the UOR and OER. With 10 mA cm−2, a mere 200 mV overpotential was required, indicating high OER catalytic activity. MoSe2–NiWSe2-driven UOR might operate at a comparatively low potential of 1.36 V (10 mA cm−2). The overpotential did not significantly alter after 40 h of continuous operation, suggesting it possesses high UOR stability. A built-in electric field that aids in controlling the adsorption and oriented distribution of urea molecules and thus promotes the oxidative properties of water and urea forms at the interface of MoSe2 and NiWSe2, where the difference in electronegativity between the elements Mo and Ni induces self-driven charge transfer and interfacial coupling effects. This work offers a method for creating catalysts that produce more oxygen and clean up urea-rich water contamination.

Effects of nano-SiO2 particle addition on the structure and properties of micro-arc oxidation ceramic coatings on 7075 aluminum alloy

Purpose The purpose of this study is to investigate the influence of varying concentrations of nano-SiO2 particle doping on the structure and properties of the micro-arc oxidation (MAO) coating of 7075 aluminum alloy. This research aims to provide novel insights and methodologies for the surface treatment and protection of 7075 aluminum alloy. Design/methodology/approach The surface morphology of the MAO coating was characterized using scanning electron microscope. Energy spectrometer was used to characterize the elemental content and distribution on the surface and cross section of the MAO coating. The phase composition of the MAO coating was characterized using X-ray diffractometer. The corrosion resistance of the MAO coating was characterized using an electrochemical workstation. Findings The results showed that when the addition of nano-SiO2 particles is 3 g/L, the corrosion resistance is optimal. Originality/value This study investigated the influence of different concentrations of nano-SiO2 particles on the structure and properties of the MAO coating of 7075 aluminum alloy.

Machine learning-aided evaluation of oxidative strength of cold atmospheric plasma-treated water.

Plasma medicine is gaining attraction in the medical field, particularly the use of cold atmospheric plasma (CAP) in biomedicine. The chemistry of the plasma is complex, and the reactive oxygen species (ROS) within it are the basis for the biological effect of CAP on the target. Understanding how the oxidative power of ROS responds to diverse plasma parameters is vital for standardizing the effective application of CAP. The proven applicability of machine learning (ML) in the field of medicine is encouraging, as it can also be applied in the field of plasma medicine to correlate the oxidative strength of plasma-treated water (PTW) according to different parameters. In this study, plasma-treated water was mixed with potassium iodide-starch reagent for color formation that could be linked to the oxidative capacity of PTW. Corresponding images were captured resulting from the exposure of the color-forming agent to water treated with plasma for different time points. Several ML models were trained to distinguish the color changes sourced by the oxidative strength of ROS. The AdaBoost Classifier (ABC) algorithm demonstrated better performance among the classification models used by extracting color-based features from the images. Our results, with a test accuracy of 63.5%, might carry a potential for future standardization in the field of plasma medicine with an automated system that can be created to interpret the oxidative properties of ROS in different plasma treatment parameters via ML.

Preparation and gas sensing properties of hexagonal zinc oxide regulated by surface modification

Preparation and gas sensing properties of hexagonal zinc oxide regulated by surface modification

Cationic pre-insertion interlayer engineering of manganese dioxide for highly efficient electromagnetic wave absorption

Interlayer engineering of two-dimensional structural materials provides unique advantages for tuning the electromagnetic properties of metal oxides, injecting unlimited energy into the design of advanced two-dimensional metal oxide electromagnetic wave absorbers. In this study, Manganese dioxide intercalated with alkali metal ions was prepared by a simple molten salt method. The pre-intercalation of ions not only enhances the polarization loss at the heterogeneous interface between cations (point sites) and manganese dioxide (face sites) but also alters the energy band structure of manganese oxide and enhances its electrical conductivity, which in turn enhances the conductive loss of the manganese dioxide. Due to the synergistic effect of multiple polarizations and conductive losses, NaMO exhibits superb electromagnetic wave absorption properties and an effective absorption bandwidth of 5.36 GHz at thinner matched thicknesses. In addition, the RCS simulation result further verifies the excellent electromagnetic wave absorption capability of NaMO. Under the positive incidence of electromagnetic waves, the electromagnetic wave reflection intensity of the metal plate coated with NaMO is effectively reduced. Finally, this work establishes a new way to modulate the electromagnetic properties.