Properties Of Fibers Research Articles

Identical calibration approach in discrete element method for modeling mechanical properties in fiber- and particle-reinforced composites

Identical calibration approach in discrete element method for modeling mechanical properties in fiber- and particle-reinforced composites

Comparative study on physical properties of bio-based PA56 fibers and wearability of their fabrics

Abstract Bio-based polyamide 56 (PA56) has significant advantages in reducing oil dependence and reducing carbon emissions. This study compared the physical properties of bio-based PA56 and conventional polyamide 66 (PA66) fibers and their fabrics. The results showed that due to the odd arrangement structure of carbon atoms in PA56 fiber molecules, its crystallinity and orientation were lower than those of PA66. At the same time, PA56 had a higher degradation rate and coloring rate due to its smaller crystallinity and higher moisture content and gave PA56 fabrics better instantaneous cooling and moisture absorption and drying properties. In addition, the molecular structure characteristics of PA56 also lead to a lower stiffness and soft feel of the fabric, which is beneficial for improving the curling phenomenon of the fabric. Overall, bio-based PA56 fibers can meet the applications in the textile and clothing field and can largely replace PA66, which is worthy of further research and utilization.

Evaluation of physicochemical properties of Rohu fish noodles

Functional noodles are considered nutritious and healthy staple food products. This study aimed to develop value-added rohu fish noodles (Labeo rohita) and evaluate their physicochemical properties. Six noodle samples were prepared following several formulations. After a 2-day drying process, the noodles were stored in air-resistant plastic bags. The formulated noodles were investigated based on their physical (water absorption capacity, cooking loss, and volume increase) and chemical (moisture, ash, protein, fat, and fiber) properties. Statistical analysis revealed that the inclusion of rohu fish mince significantly increased moisture and protein content (p<0.01), while carbohydrate, energy, water absorption capacity, cooking loss, and volume decreased significantly (p<0.01). Noodles with the highest fish mince content (30%) demonstrated a higher amount of moisture (13.07%), ash (6.7%), fat (1.87%), protein (30.08%), sodium (0.64 mg), and calcium (0.26 mg), accompanied by reduced carbohydrate (48.3%) and energy (330.31 kcal). This formulation also exhibited lower water absorption capacity, cooking loss, and volume. Notably, no significant differences (p>0.05) were found in ash, fiber, fat, and mineral content among the various fish noodle samples. This study concludes that the incorporation of rohu fish mince can enhance the nutritional properties of traditional noodles.

Comparative analysis of key fiber characteristics in white Pima cotton (Gossypium barbadense L.): Native accessions from the Peruvian Amazon

AbstractThe fiber quality of cotton (Gossypium barbadense L.) native to the Peruvian Amazon region is one of the most versatile and essential natural fibers in the Peruvian textile industry. There is little information about the fiber quality traits of cotton genotypes native to the Peruvian Amazon region. This study investigated the fiber quality traits of Peruvian Pima cotton accessions native to the Amazon region of the La Convención Province, Cusco, Peru, to determine the lines with the greatest potential for improving fiber quality in cotton genetic breeding programs. A total of 14 cotton accessions with white fiber color, being 12 accessions of G. barbadense L. (Pima cotton) and two accessions of Gossypium sp. (unknown cotton), were analyzed. The fiber properties determined using the high volume instrument method included seven characteristics. All fiber properties were classified into five quality classes. The data on fiber quality properties were subjected to distribution, correlation, and canonical variable analysis. The results of fiber quality properties showed that the two accessions of Gossypium sp. (unknown cotton) can be promising options to be used as high‐quality fiber progenies in crop genetic breeding programs or can be cultivated by regional farmers for the purpose of producing cotton with high fiber quality. Future investigations could utilize other methods of fiber quality analysis and compare the fiber quality of these cotton accessions native to the Peruvian Amazon region with other cotton species grown worldwide to improve the understanding of Pima cotton fiber quality and its applicability in different contexts of the textile industries.

Preparation and Performance of a Novel ZnO/TM/PET Composite Negative Ion Functional Fiber

Using zinc oxide (ZnO), tourmaline (TM), and polyethylene terephthalate (PET) as main raw materials, a novel ZnO/TM/PET negative ion functional fiber was created. The rheological properties of a ZnO/TM/PET masterbatch were investigated; the morphology, XRD, and FT-IR of the fibers were observed; and the mechanical properties, thermal properties, and negative ion release properties of the new fiber were tested. The results showed that the average particle size of the ZnO/TM composite is nearly 365 nm, with an increase in negative ion emission efficiency by nearly 50% compared to the original TM. The apparent viscosity of fiber masterbatch decreases with the increase in the addition of the ZnO/TM composite, and the rheological properties of the PET fiber masterbatch are not significantly effected, still showing shear thinning characteristics when the amount of addition reaches 10%. The ZnO/TM composite disperses well in the interior and surface of the ZnO/TM/PET fiber matrix. The prepared ZnO/TM/PET fiber has excellent properties, such as fineness of 1.54 dtex, glass transition temperature of 122.4 °C, fracture strength of 3.31 cN/dtex, and negative ion release of 1640/cm3, which shows great industrialization potential.

Influence of Different Retting on Hemp Stem and Fiber Characteristics Under the East of France Climate Conditions

ABSTRACT Historically, for fiber extraction, the stems were immersed in water. However, this method proved far too polluting, leading to its substitution by the dew-retting method in the field. Different retting processes and durations can produce significant differences in hemp stems and fiber characteristics. Both dew- and water-retting methods were carried out on the Santhica 27 cultivar in Eastern France in 2020. An analysis of the stem chemical composition and characteristics has been performed to observe the stem degradation during retting for both methods. Secondly, the analyses of the fiber chemical composition, color, morphological and mechanical properties have been performed to evaluate the impact of retting on the fiber quality. The effect of the retting on the stem and the fiber is observed after 1 week for water-retting and after 4 weeks for dew-retting. For dew-retting, the percentages of fine fiber and cellulose in the fiber bundle increase after 1 week, while the stem chemical composition decreases. Unlike in the dew-retting, the percentage of fine fiber and cellulose in the fiber bundle increases after 4 weeks, while the potassium percentage in the stem, fiber brightness, and fiber tenacity and strain decrease. Finally, after 8 weeks, the fiber properties were found to be similar for both methods.

Impact and Tensile Properties of Injection-Molded Glass Fiber Reinforced Polyamide 6 –Processing Temperature and Pressure Optimization

Impact and Tensile Properties of Injection-Molded Glass Fiber Reinforced Polyamide 6 –Processing Temperature and Pressure Optimization

Influence of carbonisation temperatures on multifunctional properties of carbon fibres for structural battery applications

Carbon fibres are multifunctional materials considered for the realisation of structural battery electrodes. Processing conditions affect the carbonaceous microstructure of carbon fibres. The microstructure dictates the fibre's mechanical properties, i.e. modulus and strength, as well as its electrochemical capacity. Here, carbon fibre processing conditions are investigated to identify the effect of carbonisation temperature on carbon fibre multifunctionality. Different thermal conditions during carbonisation are considered, while keeping the precursor material, applied tension, and oxidation temperature constant. The carbonaceous microstructure of fibres is investigated via wide‐angle x‐ray scattering (WAXS) and transmission electron microscopy (TEM) analyses to determine the effect of the carbonisation temperature. Mechanical and electrochemical tests are performed to characterise carbon fibre multifunctionality with respect to mechanical and electrochemical performance. A moderate trade‐off between mechanical and electrochemical performance is demonstrated, where the elastic modulus and strength decrease and the electrochemical capacity increase with reduced carbonisation temperature. Here, for the studied temperature interval, the elastic modulus and strength is found to drop up to 7% with a 15% increase in capacity. Thus, fibres customised for targeted multifunctionality within a limited design space can be realised by careful selection of the processing conditions in conventional carbon fibre manufacture.

Experimental Analysis of Mechanical Properties of Fiber Reinforced Cenosphere Lightweight Concrete with Higher Temperature Effect

The aim of this research is to explore the impact of polypropylene fibers and glass fibers on the mechanical characteristics of lightweight concrete when subjected to elevated temperatures. Different fiber ratios ranging from 0.25% &amp; 0.50% by volume of concrete were tested to evaluate their impact on various concrete mixtures. Cenosphere is lightweight material as used with cement as bonding material. Pumice aggregate, which is known for its lightweight properties, was utilized as the coarse aggregate. The study aimed to explore various characteristics of lightweight concrete such as slump value, unit weight, and compressive, tensile, and flexural strength. The concrete samples were subjected to different temperatures ranging from 200°C to 400°C for two hours. The findings revealed that the addition of glass fibers improved the tensile strength of the concrete and enhanced the compressive and flexural strength of the lightweight concrete. However, the incorporation of polypropylene fibers resulted in more cracks and pore formation in the concrete. Additionally, the compressive and flexural strength of the concrete decreased with an increase in temperature up to 400°C.

The synergy of the matrix modification and fiber geometry to enhance the thermo‐mechanical properties of basalt fiber‐polypropylene composites for automotive applications

AbstractBasalt fiber reinforced polypropylene composites with two initial fiber lengths (3.2 and 6.4 mm) were fabricated using twin‐screw extrusion compounding. In the case of composites with smaller initial fiber length, basalt fibers predominantly served as nucleating agents for polypropylene thereby resulting in an increase in the degree of crystallinity. The addition of polypropylene‐g‐maleic anhydride (PP‐g‐MA) caused the matrix to become amorphous, which was due to the establishment of a fiber–matrix interphase. This behavior was different for the composites with relatively larger initial fiber length especially at higher fiber content. The reduction in fiber length in the composites caused a decrease in crystallinity, as this hindered the ability of the polypropylene matrix to form crystals. Addition of PP‐g‐MA established a fiber–matrix interphase thereby synergistically contributing to the increased matrix amorphousness of the basalt fiber reinforced polypropylene composites with 6.4 mm initial fiber length. Reduced fiber length due to processing also accelerated the thermal degradation of the composites with an initial fiber length of 6.4 mm. However, the reduction in fiber length due to processing resulted in increased fiber orientation, which contributed to the improvement in tensile and flexural properties of the basalt fiber reinforced polypropylene composites with an initial fiber length of 6.4 mm. At 30% fiber content, the tensile strength and modulus of basalt fiber reinforced matrix modified polypropylene composites with 6.4 mm initial fiber length improved by 18% and 13% as compared with the composites with 3.2 mm initial fiber length.

Optimization, Sodium Hydroxide and Plantain Fibres: Mechanical Properties of Unsaturated Polyester Composites for Transtibial Prosthetic Socket

Low mechanical behaviors of natural fibres in the reinforcement of polymer composites have remain an issue of concern. This study is aimed at investigating the effect of NaOH treatment on the mechanical properties of plantain fiber for the transtibial prosthetic sockets made of polyester resin. Plantain fiber was extracted from the plantain bast using water retting techniques. The fibres were modified using alkaline treatment method of 5 – 25% for variable time of 30 to 150 minutes. It was optimized using 3-level Factorial design (3-LCD) of response surface methodology based on tensile properties of treated fibres. The polyester composites of plantain and glass fibers were prepared using hand-layup techniques. Instron Universal testing machine-3369 model was used to determine the tensile and impact properties of fibers and polyester composites. Rockwell hardness tester-RBHT/S-39 model was used to determine the hardness property. The optimum process conditions of 5 % NaOH for 119 minutes improved plantain fiber tensile strength, modulus, strain, energy, and extension by improved by 102.03, 208.07, 9.70, 210.52 and 205.73 %, respectively. The ultimate tensile strength and modulus was obtained at 10 and 12.5% fiber loading. The hardness and impact strength of NaOH modified unsaturated polyester composites was marginally more than 3.51 and 10.69% of glass fiber reinforced unsaturated composites, respectively, at 12.5% fiber loading. FTIR analysis revealed the improvement in mechanical properties. Thus, NaOH modified plantain fiber unsaturated polyester composites serves as a better alternative for making transtibial prosthetic socket.

Characterization of mechanical, dielectric, EMI shielding properties of abaca bract biocarbon and pineapple fiber reinforced rigid vinyl ester composite

Characterization of mechanical, dielectric, EMI shielding properties of abaca bract biocarbon and pineapple fiber reinforced rigid vinyl ester composite

Comparative Review of Mechanical Properties of Rice Straw and RiceHusk Fiber Reinforced Polymer Composite

Rice straw and rice husk fibers (RS/RH) reinforced polymer-based composites have theability to conserve wood and petroleum resources. As natural filler, rice straw and rice husk offer asustainable material for the production of polymer-based composites. The application ofbiocomposite limits the burning of straw at the root and may further enhance the socioeconomicstatus of farmers and rural populations. This review mainly focuses on five different weightpercentage of reinforced RS and RH fiber content (5%, 10%, 15%, 20% and 25%) in polymercomposites. Nowadays, Epoxy, polyurethane, polyester, PVA, PLA and polyethylene are beingused as matrix material in polymer composites. This paper holds good with understanding themechanical properties, pretreatment methods and offer important insight into potential uses ofpolymer composites with biodegradable reinforce fiber.

Студнеобразующие вещества в составе льна-долгунца и их использование в рецептурах мармеладных изделий

The purpose of research is to study gelling substances (structure formers) and use them as a partial replacement for agar when developing a recipe and technology for preparing marmalade, as well as determining the quality of the resulting marmalade product. The object of the study is the seeds of long-stalked flax produced in 2020, grown in the fields of the Russian State Agrarian University – Moscow Agricultural Academy named after K.A. Timiryazev. The results of a study on the development of a recipe for jelly marmalade are presented. To obtain marmalade with beneficial properties, we partially replaced the gelling raw material (agar) with a jelly-like suspension obtained by blanching fiber flax seeds, and completely replaced sugar with a sweetener – stevia. A new marmalade product enriched with plant raw materials was obtained. Materials related to the physicochemical properties of long-stalked flax fiber, which is one of the best spinning crops and is used in the textile industry, were studied. At the same time, the following beneficial properties of flax were noted: the content of proteins with a complete amino acid composition; the content of polysaccharides, thanks to which it is possible to obtain a jelly-like suspension and use them as a gelatinous substance. Sugar was completely removed from the recipe and replaced with stevioside, a chemical compound present in the leaves of the stevia plant. To eliminate the bitter taste of stevioside, a decoction of red currant berries was used. A tasting was also held, as a result of which the product was highly appreciated. Based on research conducted, patents were obtained. The possibility of producing marmalade with beneficial properties under production conditions is presented. The resulting sweet product is safe for overweight people and people with diseases such as diabetes.

Contact acoustic nonlinearity and damping properties of completely free vibrating curved and delaminated CFRP plates

This study reports an experimental investigation on the effect of plate curvature and circular inter-ply delamination on the completely free vibration properties of carbon fiber reinforced polymer (CFRP) plates. Impact tests on wire suspended plates were performed and variations in measured natural frequencies and modal damping are reported. Delamination clapping type contact acoustic nonlinearity (CAN) was observed in the presence of a series of higher harmonics in the vibration spectrum. These higher harmonics consisted of five to seven equally distanced peaks grouped in a frequency range of around the double of odd mode M (5,0). Modal damping was highly sensitive to delamination which caused a 33% average increase in damping loss factors. Odd mode M (3,0) was the most affected with an average increase of 51% in damping loss factor, explained by the delamination location relative to the wavelength of that mode shape. Natural frequencies were less sensitive to delamination, on average decreasing 1.0% in flat plates and increasing 3.1% in curved plates. The modal frequencies calculated from embedded fiber optic sensor (FOS) or electrical resistance strain gauge signals agreed with finite element modeling (FEM) to within a 3.1% difference for all modes considered. The damping loss factors deducted from suspended plate tests were consistent with complementary results from dynamic mechanical analysis (DMA). The measured delamination clapping CAN and its related influence on damping can serve to enhance structural health monitoring (SHM) methods.

Exploring in-plane shear characteristics of multilayer biaxial weft knitted fabrics through a micro-scale virtual fiber modeling

The multilayer biaxial weft knitted (MBWK) fabrics and their composites have been widely applied in fields of complex structural products due to their flexible curved deformability. The existence of stitch in MBWK complicates the deformation behavior under the in-plane shear loading. However, it has not been well explored and understood. In this study, a numerical micro-scale virtual fiber modeling was built to investigate the in-plane shear performance of MBWK by considering the micro geometric features and fiber property that are difficult to be characterized solely by experiment. The strain conditions of the stitch that determine the fabric shear behavior are discussed. The deformation behavior leads to local deformation and morphological locking of the stitch. In the early stage of the shearing, the deformability of stitch provides enough space to accommodate the rearrangement of axial yarns. In the shear locking stage, the restriction of stitch and compression within axial yarns at high shear angles restricts the axial yarns from movement in the loading direction. When the theoretical shear angle is 20°, the shear angle located in different shear regions varies. The maximum shear angle near the loading area is 19.1°, while the minimum shear angle near the fixed area is approximately 17°. The results illustrate the deformation mechanism of MBWK under in-plane shearing and provide an excellent guidance for the design of large deformation fabrics, especially for curved surfaces, thus realize the effective utilization of fabrics in engineering applications.

Selected Physical and Mechanical Properties of Alpaca Fibers Differing in Color

ABSTRACT Demand for alpaca fiber is subject to an increase, which is due to its beneficial properties. The study aimed to determine the differences in physical and mechanical properties, as well as heat insulation properties of alpaca fibers differing in color. The research material consisted of Huacaya alpaca fiber samples of white (W), light fawn (LF), medium fawn (MF), dark fawn (DF), and black (BLK) colors. The following properties were examined: diameter, comfort factor (CF), breaking force, elongation at break, tenacity and heat transfer rate. The finest fibers were found in W and DF fleece, while the coarsest ones in MF. CF was the highest in DF fibers. Breaking force LF varied between 6.4 (DF) and 11.7 cN (BLK), while elongation at break was 43.6 (LF) to 54.7% (BLK). No significant differences were found in case of tenacity. The best insulation properties were found for DF fibers. Correlations were confirmed between diameter and mechanical properties, and they differed slightly depending on colors.

Comprehensive insights on mechanical properties of natural-synthetic fibres with nano-graphene composite

Comprehensive insights on mechanical properties of natural-synthetic fibres with nano-graphene composite

Ultrasonic-assisted alkali hydrolysis of polyethylene terephthalate fabric and its effect on the microstructure and dyeing properties of fibers

Abstract In this study, ultrasound energy was applied to assist the alkali hydrolysis of polyethylene terephthalate (PET) fabric, and then, the results were compared with those of the mechanical oscillating method, which was used as the control. The effects of various factors such as the sodium hydroxide concentration, the dosage of dodecyl dimethyl benzyl ammonium chloride (DDBAC), and the frequency on the weight loss of the PET fabrics were systematically investigated. The surface appearance and microstructures of the treated fibers with different methods were analyzed using a scanning electron microscope and X-ray diffraction, respectively. The results showed that DDBAC played a prominent accelerating role in the hydrolysis of the PET polymer, and the frequency had a great influence on the weight loss of the PET fabric. Ultrasound with a frequency of 60 kHz showed a similar decomposition rate as the control, resulting in similar weight loss, which was the highest value among the three frequencies (20, 60, and 80 kHz). In addition, the application of ultrasonic energy led to more pits on the fiber surface, a smaller average grain size, and decreased crystallinity of the treated fibers, while the mechanical oscillating method resulted in slightly increased crystallinity. By comparing the K/S value of the dyed fabrics with two commercial disperse dyes, we found that the treatment method had no obvious correlation with the color depth of the treated fabric.

Characterization of Bauhinia Variegata natural fiber treated with bleaching, benzoylation, and alkalization

This study describes the physical, chemical, mechanical as well as morphological characterization of surface modified novel Bauhinia Variegata (BVR) stem fibers. Surface modifications for the fiber are accomplished with bleaching, benzoylation, and alkalization treatments. Using standard test methods, the chemical constituents of BVR fiber are evaluated like α- cellulose 62.5%, hemicellulose 10.8%, lignin18.2% and wax 0.8%. Scanning electron microscopy (SEM) was used to see how different the chemical reactions affect the fiber and SEM images confirmed the enhanced rough surface and existence of voids, along with the subtraction of unusual substances from the fiber surface. In both treated as well as untreated BVR, a Fourier-transform infrared spectroscopy (FTIR) analysis established the presence of cellulose, hemicelluloses, and lignin components. X-ray diffraction test evaluated the crystalline index for treated and raw fiber. The thermogravimetric test provides proof of enhanced thermal sustainability in the BVR upon treating chemically. The increased tensile strength and Young’s modulus upon chemical treatment confirm the improvement in the mechanical properties of the BVR fiber. The moisture absorption test revealed that the hydrophilic nature of BVR was reduced after the chemical treatment, promoting greater fiber-matrix adhesion. Presently studied BVR fiber seems to be a good substitute to the harmful man-made fibers for making of bio composites.