Properties Of Fibers Research Articles

Investigation of Mechanical Properties of Natural Fiber Reinforced Hybrid Composite

Abstract: Hybrid composite is a material composed of matrix and two or more reinforcements. Two or more reinforcements in hybrid composite replace the limitation of conventional composites by providing uniform strength to thematerial. Recently, natural fibers reinforced hybrid composites are gaining increased interest due to the encouraging properties of natural fibers such as high strength to weight ratio, low cost, no harm to environment etc. Many studies dealt with natural fibers based composite reported that the hybrid composites has the potential to replace glass fiber based composites and to reduce the weight of conventional composite. This project reports on the manufacturing of the Indian elm and Acacia fibre reinforced epoxy composite laminate as per the ASTM (American Society for Testing and Materials) Standards. This laminate consists of matrix and reinforcement. Epoxy is used as a structural matrix material which is then reinforced by Indian elm fiber, combining Acacia fibres with resin matrix results in composites that are strong, lightweight, corrosion-resistant and dimensionally stable. They also provide good design flexibility, high dielectric strength and act as inflammable materials. Their tremendous strength-to-weight and design flexibility make them ideal in structural components for the aerospace industry. In this project the Indian elm and Acacia fibre reinforced epoxy composite is manufactured into two different parts each having ratios of Indian elm and Acacia fibre to epoxy resin as 60:40, 40:60 respectively and are compared for ultimate tensile strength, impact strength, hardness strength and flexural strength of the material by conducting experiment such as tensile test, flexural test, hardness test and impact test.

Exploring the Sound Absorption and Sound Insulation Capabilities of Natural Fiber Composites: Nipa Palm Peduncle Fiber

This study investigates the acoustic properties of nipa palm peduncle fiber (NPPF) composites, a promising natural fiber with a tensile strength of 277 MPa, a yield strength of 49.0 MPa, and a Young’s modulus of 12.0 GPa. We focus on understanding how NPPF’s physical characteristics influence its sound absorption and insulation capabilities. Through experimental analysis, we found that the sample density directly affects the sound absorption coefficient (SAC) and transmission loss (TL), with denser samples exhibiting better noise reduction. Using the Johnson-Champoux-Allard-Lafarge (JCAL) model, we correlated these acoustic properties with the material’s non-acoustic parameters including flow resistivity (σ), open porosity (), tortuosity (α∞), viscous (Λ) and thermal (Λ' ) characteristic lengths along with static thermal permeability (). The results validate the JCAL model’s predictions, offering insights into designing effective, eco-friendly acoustic materials. This study not only highlights NPPF composites’ notable acoustic performance but also underlines their potential for contributing to sustainable development.

Effects of amount and geometrical properties of steel fiber on shear behavior of high-strength concrete beams without shear reinforcement

This study aims to investigate the effects of the geometrical properties and volume content of steel fibers on the shear resistance of reinforced high-strength concrete (HSC) beams without stirrups. Hooked-end and twisted steel fibers with different aspect ratios ranging from 60 to 100 were used at volume fractions of 0.5%–1.0%. The shear strength of HSC beams without stirrups significantly increased due to the addition of steel fibers and by increasing their volume fraction by up to 1.0%, resulting in approximately 1.7 times higher shear resistance. A higher fiber aspect ratio was effective in improving the resistance to shear failure of HSC beams without stirrups and in enhancing beam deformability relative to the increase in shear strength. Using twisted steel fibers led to better shear resistance than hooked-end steel fibers, resulting in 1.11- and 3.34-times higher shear strength and ductility at the same fiber volume fraction on average. The shear strength of steel fiber-reinforced concrete (SFRC) beams was also predicted using eight different models. Narayanan's model most precisely predicted the shear strengths of reinforced SFRC beams without shear reinforcement, with an average vu,exp/vu,pred ratio of 1.16. The shear strength increased with the decrease in shear span-to-depth (a/d) ratio and the increase in the fiber factor. The contribution of steel fibers to shear strength was greater for deep beams than slender beams. The predicted shear strengths of deep beams and high-strength SFRC showed a significant deviation from the actual value and required careful consideration.

Prognostication of mechanical properties of banana and jute fiber reinforced concrete using ANN

Prognostication of mechanical properties of banana and jute fiber reinforced concrete using ANN

Influence of fly-ash filler and moisture content on vibrational and acoustic properties of basalt fibre reinforced composites

ABSTRACT Fly ash, a by-product of coal combustion consisting of particulates and flue gases expelled from coal-fired furnaces, has found application as a substitute for organic fillers in the composites industry. In this study, the focus lies on assessing the vibrational and acoustic performance of composites composed of epoxy-based basalt combined with fly ash. Experimental investigations were carried out on specimens containing different weight percentages of fly ash (0%, 10%, 15% and 20% of the epoxy weight) to evaluate free vibration and acoustic impedance. Additionally, the impact of moisture on the vibrational and acoustic properties of Basalt/Fly ash-Epoxy composites was examined by subjecting the specimens to 3 months of ageing in distiled water. The results revealed that increasing the filler content up to 15% led to an increase in natural frequencies (8.5 Hz) and stiffness (3.8 N/mm) of the material, although the damping ratio (0.219) has decreased. Notably, as the specimens aged, the damping ratio is improved by 9%, while the natural frequency and stiffness decline by 9.67% and 12.5%, respectively. The material density emerged as a critical factor influencing the sound absorption capability of the specimens. The inclusion of fly ash in the epoxy matrix has enhanced the acoustic properties of the tested specimens.

Investigation of the hybridization effect on mechanical properties of natural fiber reinforced biosourced composites

Hybridizing the natural fibers with stronger synthetic fibers could significantly improve the properties of the natural fiber-reinforced composites. The improved mechanical capabilities of fiber reinforced polymers result from the fiber’s capacity for withstanding a more substantial portion of the mechanical load compared to the matrix it replaces. In order to guarantee the efficient transfer of the mechanical load from the matrix to the reinforcement, it is necessary to incorporate a fibrous filler. Transference takes place when the length of the fiber is longer than a specific critical length. Fibers which are shorter than the critical length will pull out from the matrix when tested to a tensile load. In some cases, complete transfer of the load is not performed. The goal of this study is to learn more about flax (FF), glass (GF), and mixtures of flax and glass (FF + GF) short fiber-reinforced PLA-PBS composites. This is performed to find out how the flax/glass combination affects the mechanical properties of PLA-PBS-reinforced short fiber composites. In order to extend their use for industrial applications, these composites were manufactured via extrusion and, afterward, injection molding. Fiber aspect ratios were followed after compounding and injection processing. The analysis of fiber lengths reveals a noteworthy observation: the proportion of fibers exceeding their critical length of 531 µm and 772 µm for FF and GF, respectively, is more significant when flax fibers (FF) and glass fibers (GF) are combined compared to when they reinforce the composite individually. Specifically, the composite containing both FF and GF exhibits a higher percentage of fibers surpassing their critical length, compared to their individual reinforcement in the composite. The results reveal that 27% of individually extracted single FF exceed their critical length, whereas a higher proportion, at 34%, is observed when FF is part of the composite mixture. In contrast, the critical length is surpassed by only 4% of individually extracted single GF, whereas the combined presence of GF in the composite results in a notably higher percentage, at 19%. The tensile properties of these composites were investigated considering the effect of the hybridization by flax/glass short fibers. It was noted that the tensile properties of the hybrid composites increase comparing to the flax composites from 42.4 MPa to 53 MPa for the tensile strength and from 4.9 GPa to 5.4 GPa for the tensile modulus. In contrast, the elongation at break of the hybrid composites decreases from 1.7% to 1.5% with the incorporation of glass fibers. The experimental results were compared with the predictions of the mixture law and the Cox-Krenchel model. The findings indicate that mixing synthetic fibers with natural fibers is an excellent approach to enhancing mechanical properties.

#2717 Fermentable and viscous dietary fiber types improve cortical bone in a rat model of chronic kidney disease-mineral and bone disorder

Abstract Background and Aims Renal osteodystrophy is highly prevalent among people with chronic kidney disease (CKD). We recently showed that inulin, a prebiotic fermentable dietary fiber, improved cortical bone parameters in rats with moderate-to-severe CKD. Our objective was to evaluate if this effect was unique to the prebiotic fibers or if other fiber properties, such as viscosity, could be beneficial to bone in a rat model of CKD-mineral and bone disorder (CKD-MBD). Method 22-week-old Cy/+ male rats (50% kidney function compared to normal; CKD hereafter) were randomly assigned to receive one of four fiber treatments (10% w/w each) based on fermentability and viscosity: 1) Cellulose (−fermentability, −viscosity), 2) Inulin (+fermentability, −viscosity), 3) Psyllium husk (−fermentability, +viscosity), or 4) Pectin (+ fermentability, +viscosity). These diets were formulated with a semi-purified, casein-based background diet with 0.7% calcium and 0.7% phosphorus. Treatments lasted 10 weeks, and rats were euthanized at 32 weeks of age (kidney failure; ∼15% of normal). Micro-computed tomography (μCT) at 12-μm resolution was performed on the proximal tibia. Serum creatinine, plasma phosphorus, and plasma calcium were analyzed using colorimetric assays. One-way ANOVA was used to test the effect of dietary fiber types on outcome measures. Results At 32 weeks of age, serum creatinine was lower in the inulin, psyllium, and pectin-treated CKD rats (<0.04). Plasma calcium concentrations were similar between treatments, but phosphorus was lower in the psyllium and pectin-treated CKD rats (p < 0.02). Bone cortical area was higher in the inulin and psyllium-treated CKD rats compared to cellulose-treated rats (p < 0.007). Cortical thickness was higher in the inulin, psyllium, and pectin-treated CKD rats compared to cellulose-treated rats (p < 0.02). There was less cortical porosity in the inulin, psyllium, and pectin-treated rats (p < 0.02). Fermentable or viscous fibers did not impact trabecular bone volume, thickness, spacing, and number (p < 0.05). Plasma phosphorus was negatively associated with cortical area (r = −0.56; p < 0.0001) and cortical thickness (r = −0.75; p < 0.0001), and positively associated with cortical porosity (r = 0.74; p < 0.0001). Conclusion Fermentable and viscous fibers improved cortical bone but had no effect on trabecular bone. This effect may be, at least in part, due to the fiber's ability to lower plasma phosphorus and likely parathyroid hormone.

Enhancing mechanical and morphological properties of glass fiber reinforced epoxy polymer composites through rutile nanoparticle incorporation

Enhancing mechanical and morphological properties of glass fiber reinforced epoxy polymer composites through rutile nanoparticle incorporation

Study of the thermomechanical behavior of composite based on Elium acrylic resin, carbon nanotubes, and flax fibers: Experimental approach

AbstractThis study evaluated the effect of multi‐walled carbon nanotubes (MWCNT) addition on the thermomechanical, and electrical responses of unidirectional flax fibers/Elium acrylic modified carbon nanotubes‐based composite. The manufacturing process of these laminated composites involved infusing the nanofillers onto the fibers, ensuring good dispersion of MWCNT within the matrix. Regardless of the rate of incorporated nanotubes, this study revealed a significant deterioration of the mechanical properties in tension and viscoelastic properties of the Elium acrylic resin‐based nanocomposite. The electrical conductivity significantly increased for all nanocomposites and laminated composites. In contrast to the nanocomposite, the unidirectional flax fibers/MWCNT/Elium acrylic composite exhibited a considerable improvement in mechanical properties. An increase in Young's modulus and stress at break of about 27% and 23% respectively, was achieved for the material loaded with 2 wt% of MWCNT. The presence of MWCNT reduces the saturation weight by 5% for the unidirectional composite filled with an amount of 1.5 wt% in MWCNT.Highlights Improving the electrical properties of nanocomposites and unidirectional fibers (UD) composites. Improving the mechanical properties of Elium/flax/multi‐walled carbon nanotubes (MWCNT) composites. Influence of MWCNTs on the water absorption of UD composites. Influence of MWCNT on the glass transition temperature of nanocomposites. Inhibiting polymerization of MWCNT with Elium.

Can Daily Dietary Choices Have a Cardioprotective Effect? Food Compounds in the Prevention and Treatment of Cardiometabolic Diseases

Cardiovascular diseases accompanying metabolic syndrome comprise one of the leading causes of death worldwide. The medical community undertakes attempts to improve treatment options and minimize cardiovascular diseases’ numerous consequences and exacerbations. In parallel with pharmacotherapies provided by physicians, nutritionists are developing strategies for diet therapy and prevention based on lifestyle changes, with high success rates. Consumption of specified food compounds included in various products with proven protective properties can be helpful in this regard. Due to the wide possibilities of diet in metabolic health promotion, it seems necessary to systematize information about the metabolically protective and cardioprotective properties of fiber, probiotic bacteria, plant sterols, folic acid, vitamins B12, C, and E, PUFAs, lycopene, polyphenols, arginine, CoQ10, and allicin. The aim of this review was to present the food compounds with potential use in cardiometabolic prevention and diet therapy based on the latest available literature.

Design, preparation, and mechanical properties of glass fiber reinforced thermoplastic self‐anchor plate cable exposed in alkaline solution environment

Design, preparation, and mechanical properties of glass fiber reinforced thermoplastic self‐anchor plate cable exposed in alkaline solution environment

The intrinsic influence of the stress on the optical properties of Panda-type erbium-doped fibers

The intrinsic influence of the stress on the optical properties of Panda-type erbium-doped fibers

Identical calibration approach in discrete element method for modeling mechanical properties in fiber- and particle-reinforced composites

Identical calibration approach in discrete element method for modeling mechanical properties in fiber- and particle-reinforced composites

Comparative study on physical properties of bio-based PA56 fibers and wearability of their fabrics

Abstract Bio-based polyamide 56 (PA56) has significant advantages in reducing oil dependence and reducing carbon emissions. This study compared the physical properties of bio-based PA56 and conventional polyamide 66 (PA66) fibers and their fabrics. The results showed that due to the odd arrangement structure of carbon atoms in PA56 fiber molecules, its crystallinity and orientation were lower than those of PA66. At the same time, PA56 had a higher degradation rate and coloring rate due to its smaller crystallinity and higher moisture content and gave PA56 fabrics better instantaneous cooling and moisture absorption and drying properties. In addition, the molecular structure characteristics of PA56 also lead to a lower stiffness and soft feel of the fabric, which is beneficial for improving the curling phenomenon of the fabric. Overall, bio-based PA56 fibers can meet the applications in the textile and clothing field and can largely replace PA66, which is worthy of further research and utilization.

Evaluation of physicochemical properties of Rohu fish noodles

Functional noodles are considered nutritious and healthy staple food products. This study aimed to develop value-added rohu fish noodles (Labeo rohita) and evaluate their physicochemical properties. Six noodle samples were prepared following several formulations. After a 2-day drying process, the noodles were stored in air-resistant plastic bags. The formulated noodles were investigated based on their physical (water absorption capacity, cooking loss, and volume increase) and chemical (moisture, ash, protein, fat, and fiber) properties. Statistical analysis revealed that the inclusion of rohu fish mince significantly increased moisture and protein content (p<0.01), while carbohydrate, energy, water absorption capacity, cooking loss, and volume decreased significantly (p<0.01). Noodles with the highest fish mince content (30%) demonstrated a higher amount of moisture (13.07%), ash (6.7%), fat (1.87%), protein (30.08%), sodium (0.64 mg), and calcium (0.26 mg), accompanied by reduced carbohydrate (48.3%) and energy (330.31 kcal). This formulation also exhibited lower water absorption capacity, cooking loss, and volume. Notably, no significant differences (p>0.05) were found in ash, fiber, fat, and mineral content among the various fish noodle samples. This study concludes that the incorporation of rohu fish mince can enhance the nutritional properties of traditional noodles.

Comparative analysis of key fiber characteristics in white Pima cotton (Gossypium barbadense L.): Native accessions from the Peruvian Amazon

AbstractThe fiber quality of cotton (Gossypium barbadense L.) native to the Peruvian Amazon region is one of the most versatile and essential natural fibers in the Peruvian textile industry. There is little information about the fiber quality traits of cotton genotypes native to the Peruvian Amazon region. This study investigated the fiber quality traits of Peruvian Pima cotton accessions native to the Amazon region of the La Convención Province, Cusco, Peru, to determine the lines with the greatest potential for improving fiber quality in cotton genetic breeding programs. A total of 14 cotton accessions with white fiber color, being 12 accessions of G. barbadense L. (Pima cotton) and two accessions of Gossypium sp. (unknown cotton), were analyzed. The fiber properties determined using the high volume instrument method included seven characteristics. All fiber properties were classified into five quality classes. The data on fiber quality properties were subjected to distribution, correlation, and canonical variable analysis. The results of fiber quality properties showed that the two accessions of Gossypium sp. (unknown cotton) can be promising options to be used as high‐quality fiber progenies in crop genetic breeding programs or can be cultivated by regional farmers for the purpose of producing cotton with high fiber quality. Future investigations could utilize other methods of fiber quality analysis and compare the fiber quality of these cotton accessions native to the Peruvian Amazon region with other cotton species grown worldwide to improve the understanding of Pima cotton fiber quality and its applicability in different contexts of the textile industries.

In-plane compressive properties and failure mechanisms of gradient Cf/ZrB2–SiC composites in high-temperature environment

The gradient Cf/ZrB2–SiC composites can exert the dual advantages of low-density and excellent heat resistance, but which have the complex mechanical properties due to the inhomogeneous geometry characteristics. The in-plane compressive behavior and failure analysis can examine the material integrity and the effect of inhomogeneous characteristics. The in-plane compressive elastic modulus distribution is expressed mathematically by using the superficial elastic modulus, back elastic modulus, and the gradient pore distribution. The superficial elastic modulus and the gradient pore distribution of the gradient materials were characterized by nanoindentation test and Micro-CT statistics. The back of the gradient materials is the porosity needled C/C composites without introducing ZrB2–SiC matrix, whose elastic modulus can be referenced from our previous work. The in-plane compressive experiments of the gradient materials in the high-temperature environment were also conducted to study the failure mechanisms. The strength of the gradient materials is further revealed by the temperature-dependent properties of carbon fibers and thermal residual stress release. The results indicate the gradient structure can effectively eliminate the delamination damage, but the high temperature drastically weakens the ability of needled fibers suppressing delamination damage in the high-porosity region of the gradient materials. This study can be helpful to the material design and evaluation of mechanical properties for the gradient Cf/ZrB2–SiC composites.

Preparation and Performance of a Novel ZnO/TM/PET Composite Negative Ion Functional Fiber.

Using zinc oxide (ZnO), tourmaline (TM), and polyethylene terephthalate (PET) as main raw materials, a novel ZnO/TM/PET negative ion functional fiber was created. The rheological properties of a ZnO/TM/PET masterbatch were investigated; the morphology, XRD, and FT-IR of the fibers were observed; and the mechanical properties, thermal properties, and negative ion release properties of the new fiber were tested. The results showed that the average particle size of the ZnO/TM composite is nearly 365 nm, with an increase in negative ion emission efficiency by nearly 50% compared to the original TM. The apparent viscosity of fiber masterbatch decreases with the increase in the addition of the ZnO/TM composite, and the rheological properties of the PET fiber masterbatch are not significantly effected, still showing shear thinning characteristics when the amount of addition reaches 10%. The ZnO/TM composite disperses well in the interior and surface of the ZnO/TM/PET fiber matrix. The prepared ZnO/TM/PET fiber has excellent properties, such as fineness of 1.54 dtex, glass transition temperature of 122.4 °C, fracture strength of 3.31 cN/dtex, and negative ion release of 1640/cm3, which shows great industrialization potential.

Experimental research and theoretical prediction on mechanical properties for recycled GFRP fiber reinforced concrete

Recycled GFRP fiber has increasingly been reused in concrete, necessitating an improvement in its recycling process and an investigation into its effects on the mechanical properties of concrete to achieve higher recycling values. To this end, this study proposed a novel GFRP recycling method that integrates mechanical recycling, water-vibratory separation, and secondary sieving to efficiently remove impurities from GFRP waste. Three different sizes of recycled GFRP fibers (SF, MF, and LF) were sorted from decommissioned GFRP wind turbine blades using the novel recycling method, and their effects of on the mechanical properties of concrete were investigated. The results show that all three types of recycled GFRP fibers increase the strength and toughness of concrete. With equivalent fiber content, the largest recycled GFRP fiber (LF) yields the most substantial reinforcement effect on the mechanical properties of concrete. Specifically, incorporating 1.0 % LF increases the compressive strength, splitting tensile strength, and flexural strength of concrete by 14.0 %, 16.8 %, and 37.0 %, respectively, while also increasing flexural toughness by 2.9 times. In addition, the mechanical properties of recycled GFRP fiber reinforced concrete were theoretically analyzed in this study, and two strength prediction models for recycled GFRP fiber reinforced concrete were established to achieve rapid prediction of concrete strength.

Influence of Different Retting on Hemp Stem and Fiber Characteristics Under the East of France Climate Conditions

ABSTRACT Historically, for fiber extraction, the stems were immersed in water. However, this method proved far too polluting, leading to its substitution by the dew-retting method in the field. Different retting processes and durations can produce significant differences in hemp stems and fiber characteristics. Both dew- and water-retting methods were carried out on the Santhica 27 cultivar in Eastern France in 2020. An analysis of the stem chemical composition and characteristics has been performed to observe the stem degradation during retting for both methods. Secondly, the analyses of the fiber chemical composition, color, morphological and mechanical properties have been performed to evaluate the impact of retting on the fiber quality. The effect of the retting on the stem and the fiber is observed after 1 week for water-retting and after 4 weeks for dew-retting. For dew-retting, the percentages of fine fiber and cellulose in the fiber bundle increase after 1 week, while the stem chemical composition decreases. Unlike in the dew-retting, the percentage of fine fiber and cellulose in the fiber bundle increases after 4 weeks, while the potassium percentage in the stem, fiber brightness, and fiber tenacity and strain decrease. Finally, after 8 weeks, the fiber properties were found to be similar for both methods.