Properties Of Composite Yarns Research Articles

Nylon 66 / Nomex Composite Yarn Performance Analysis

The embedded composite spinning technology was applied in spinning the composite yarn of polyamide 66 and nomex .The relationship of the polyamide 66 and nomex’s content with the mechanical properties of composite yarn and hairiness was discussed. The method of cluster analysis was applied in analyzing the four kinds of yarn’s mechanical properties. And the results show that when the confidence interval is 95%, the significance of two kinds yarns were greater than 0.05. There is no significant difference between the programs. While the analysis of the hairiness data showed that the fourth solution’s harmful hairiness was much lower that the first solution’s. Therefore, the best solution is the fourth solution.

The Analysis of the Deformational Behavior and Mechanical Properties of Composite Yarn under the Conditions of Small Deformation

This paper studied the mechanical behavior of the filament/staple fiber composite yarn and the pure cotton yarn under the isostress and isostrain of cycling tensile strength with the conditions of small deformation. And it also analyzed the elastic recovery rate, creep rate and stress relaxation rate under the different deformation rate and load. The results show that the mechanical properties of elastic recovery rate, stress relaxation and creep all keep in good range in the experiment of cycling tensile strength with low certain elongation and constant load; as the increase of certain elongation and constant load, the mechanical properties of elastic recovery rate, stress relaxation and creep have much difference, just in terms of the conformality under the cyclic tensile strength, PET/PU/cotton composite yarn shows the best, next is the PU/cotton composite yarn, and then next is the PET /cotton composite yarn, and the pure cotton yarn shows the worst.

Effects of twisting parameters on characteristics of rotor-spun composite yarns with spandex

Spandex fibers have superior stretch and elastic recovery ability. Composite yarns containing spandex are frequently used to manufacture elastic textile products and accessories. We have developed a composite yarn spinning system that produces different kinds of composite yarns containing spandex on a modified open-end rotor spinning frame. By changing the twisting parameter of composite yarns, we studied the structure and properties of rotor-spun composite yarns with spandex. The results indicate that the twisting parameter has great influence on the structure and properties of rotor-spun composite yarns with spandex. The linear density of spandex filament has influence on the properties of composite yarns too. In comparison with normal rotor-spun yarn, the appearance of composite yarns is clearer, the structure is much tighter, and the properties are improved.

Characteristics of Rotor Spun Cotton/Spandex Composite Yarns

Spandex fibers have superior stretch and elastic recovery ability, which is why clothes containing spandex fibers fit well and are comfortable. The most common methods of producing elastic yarns are core-spun on a modified ring frame and hollow spindle technique. Rotor spinning has many advantages over ring spinning and has been adopted worldwide. In this paper, a method of producing the cotton/spandex composite yarns on a modified open-end rotor spinning is introduced. By changing the draft ratio and linear density of spandex filaments, different kinds of cotton/spandex composite yarns are produced on a modified rotor spinning frame, and their appearance and properties are tested and analyzed at the same time. The results show that the spandex draft ratio has great influence on the appearance and properties of rotor spun cotton/spandex composite yarns. The linear density of spandex filaments also has influence on the properties of composite yarns.

Effect of spread width on properties of composite yarn

Abstract This study examines the effect of polyester multifilament oil, mill absolute humidity, and the effect of spreading voltage on multifilament spread width on properties of composite yarn. The results show the yarn spinnability and properties can be improved by the correct selection of oil type with oil contents at 0.7%, by controling absolute humidity and by adjusting spreading voltage to stabilize spread width at about 8∼10 mm. In addition, it can be increased about 30% in production with low twist and still retain excellent yarn properties; especially on a high tenacity, low imperfection index and only about 10% hairiness when compared with cotton‐rich spun yarn.