Electromagnetic Wave Propagation Research Articles

Electronic analogue of Fourier optics with massless Dirac fermions scattered by quantum dot lattice

Abstract The field of electron optics exploits the analogy between the movement of electrons or charged quasiparticles, primarily in two-dimensional materials subjected to electric and magnetic (EM) fields and the propagation of electromagnetic waves in a dielectric medium with varied refractive index. We significantly extend this analogy by introducing an electronic analogue of Fourier optics dubbed as Fourier electron optics (FEO) with massless Dirac fermions (MDF), namely the charge carriers of single-layer graphene under ambient conditions, by considering their scattering from a two-dimensional quantum dot lattice (TDQDL) treated within Lippmann-Schwinger formalism. By considering the scattering of MDF from TDQDL with a defect region, as well as the moir'{e} pattern of twisted TDQDLs, we establish an electronic analogue of Babinet's principle in optics. Exploiting the similarity of the resulting differential scattering cross-section with the Fraunhofer diffraction pattern, we construct a dictionary for such FEO. Subsequently, we evaluate the resistivity of such scattered MDF using the Boltzmann approach as a function of the angle made between the direction of propagation of these charge-carriers and the symmetry axis of the dot-lattice, and Fourier analyze them to show that the spatial frequency associated with the angle-resolved resistivity gets filtered according to the structural changes in the dot lattice, indicating wider applicability of FEO of MDF.

Ultrabroadband valley transmission and corner states in valley photonic crystals with dendritic structure

In photonic crystal systems, topologically protected edge states and corner states can be achieved by breaking spatial inversion symmetry, which is expected to be applied to topologically protected lasers, optical communication and integrated photonics. However, designing ultrabroadband topological photonic crystals is still a challenge. In this work, we propose a valley photonic crystal composed of dendritic structures, which can realize valley transmission with a relative bandwidth up to 59.65%. Compared with the previously reported two-dimensional broadband photonic crystals with 32.02% bandwidth, the relative bandwidth of the proposed valley transmission is increased by almost 100%. Theoretical analysis, numerical simulation and experimental measurement all confirm flexible manipulation of electromagnetic wave propagation paths. Ultrabroadband topological waveguides with the zigzag and armchair interface are demonstrated, which can achieve experimentally 58.71% and 36.78% relative bandwidth, respectively. In addition, several topological channel intersections are designed. Finally, two types of corner states with valley switchability and selectivity are demonstrated.

Nodal discontinuous Galerkin methods for Maxwell's equations in Lorentz-Kerr-Raman medium without nonlinear algebraic solver

The propagation of electromagnetic waves is modeled by time-dependent Maxwell's equations coupled with constitutive laws that describe the responses of the media. In this work, we consider a nonlinear model that describes the electromagnetic wave in an optical medium with the linear Lorentz effect and the cubic nonlinear instantaneous Kerr and delayed Raman effects. Mathematically this model obeys an energy conservative/dissipative law. Though there have been active efforts in designing numerical methods (e.g. of finite difference / finite element /discontinuous Galerkin type) to simulate this model, the methods proposed here are distinctive in that they are free of any nonlinear algebraic solvers. Moreover, in the absence of the Raman effect, our methods also enjoy a provable discrete energy law, and optimal a priori error estimates are further established when the exact solutions are sufficiently smooth. The key ingredients of the new methods include some novel treatment in time discretizations and nodal discontinuous Galerkin spatial discretization for the specific nonlinearities, and they also render a local nature of the methods and hence their suitability for parallel implementation with great efficiency. Numerical experiments are performed to illustrate the accuracy, stability, computational efficiency and parallel scalability of the proposed methods. We further apply the methods to simulate some physically relevant problems in one, two, and three dimensions.

Artificial intelligence-powered intelligent reflecting surface systems countering adversarial attacks in machine learning

With the increase in the computation power of devices wireless communication has started adopting machine learning (ML) techniques. Intelligent reflecting surface (IRS) is a programmable device that can be used to control electromagnetic wave propagation by changing the electric and magnetic values of its surface. State-of-the-art ML especially on deep learning (DL)-based IRS-enhanced communication is an emerging topic. Yet while integrating IRS with other emerging technologies possibilities of adversarial data creaping is high. Threats to security, their mitigation, and complexes for AI-powered applications in next generation networks are continuously emerging. In this work the ability of an IRS enhanced wireless network in future-generation networks to prevent adversarial machinelearning attacks is studied. The artificial intelligence (AI) model is used to minimize the susceptibility of attacks using defense distillation mitigation technique. The outcome shows that the defensive distillation technique (DDT) increases the strength and performance by around 22% of the AI method under an adversarial attack.

Turbulence-enhanced THz generation by multiple chaotically-distributed femtosecond filaments in air

Remote generation of electromagnetic waves in the terahertz (THz) by the volume of air medium gains increasing scientific interest due to the demand for this spectral range in solving various practical problems including those belonging to the nonlinear atmospheric optics. During self-focusing and filamentation of high-power femtosecond laser pulses in air, the source of THz radiation is the plasma of laser filaments. One of the main challenges of THz generation by a laser filament is increasing the value of optical energy conversion to the long-wavelength band. In this paper, we present the results of our studies on DC-biased THz generation during single-color filamentation in air of focused femtosecond Ti:Sapphire-laser pulses (800 nm, pulse energy up to 40 mJ). The distinctive feature of our study is that a femtosecond optical pulse propagates through a spatially-localized heated air layer containing randomly inhomogeneous refractive index perturbations, which mimics strong air turbulence. For the first time to our knowledge, we show, that the turbulent air layer formed at the beginning of the optical path allows increasing the yield of THz radiation up to 1.5 times due to the formation of multiple chaotically-arranged filaments resulting from random perturbations of the optical beam energy profile that reduces the subsequent THz (re)absorption in the filament plasma.

A 3-D Global FDTD Courant-limit Model of the Earth for Long-time-span and High-altitude Applications

A new global 3-D finite-difference time-domain (FDTD) model is introduced to simulate electromagnetic wave propagation around the Earth, including the lithosphere, oceans, atmosphere, and ionosphere regions. This model has several advantages over existing global models, which include grids that follow lines of latitude and longitude and geodesic grids comprised of hexagons and pentagons. The advantages of the new model include: (1) it may be run at the Courant-Friedrichs-Lewy (CFL) time step (as a result, it is termed the Courant-limit model); (2) subgrids may be added to specific regions of the model as needed in a straight-forward manner; and (3) the grid cells do not become infinitely larger as the grid is extended higher in altitude. As a result, this model is a better candidate than the others for investigating electromagnetic phenomena over long time spans of interest and for investigating atmosphere-ionosphere-magnetosphere coupling. The new model is first described and then validated by comparing results for extremely low frequency (ELF) propagation attenuation with corresponding analytical and measurement results reported in the literature.

Optimised correction polynomial functions for the Flux Reconstruction method in time-harmonic electromagnetism

The Flux Reconstruction (FR) method is classically used in the Computational Fluid Dynamics field. However, its use for the simulation of electromagnetic wave propagation is not as developed yet. Following on from the development of a priori error estimates for the 1D wave equations, we introduce optimisation problems to allow an adaptation of the FR correction polynomial functions to the discretisation parameters. Showing notable accuracy gains in 1D, especially in the preasymptotic regime, we generalise this procedure to the 3D Maxwell’s equations, leading to similar interesting possibilities to reduce the computational cost for a given accuracy.

Near-Field to Far-Field Approximation Formulas Based on the Asymptotic Expansion Method for Electromagnetic Wave Propagation Across Air–Sea Boundary Due to a Vertical Magnetic Dipole

Near-Field to Far-Field Approximation Formulas Based on the Asymptotic Expansion Method for Electromagnetic Wave Propagation Across Air–Sea Boundary Due to a Vertical Magnetic Dipole

The potential of pulsed electromagnetic field-generated shock waves for reducing microbial load and improving homogenization in raw milk

Milk is a highly nutritious food essential for human consumption. However, traditional thermal processing methods can reduce its nutritional value and cause unwanted changes. The use of shock waves produced by pulsed electromagnetic fields (PEMFs) has been explored as a means to reduce pathogenic microorganisms. The effect of shock wave treatment on microbial load and particle distribution in packaged fresh cow's milk was investigated. Additionally, the impact of shock wave treatment on Salmonella enterica counts in a bacterial suspension of phosphate-buffered saline (PBS) was evaluated, as this bacterium is a significant milkborne pathogen. Treatment with 1000 impulses from an electromagnetic shock wave generator resulted in a 0.7-log reduction in the total bacterial count of milk. In a separate experiment, a 300-impulse shock wave treatment applied to a Salmonella enterica suspension achieved a 3-log reduction in bacterial counts. Furthermore, shock wave treatment resulted in a decrease in milk particle size compared to untreated milk. Notably, the volume of milk used in this study aligns with commercially available packaged products, enhancing the experiment's industrial relevance. The use of PEMF to generate shock waves could provide a novel approach for future studies focused on reducing the microbial load of milk and improving its homogenization.

Absorption‐Dominant Electromagnetic Interference (EMI) Shielding across Multiple mmWave Bands Using Conductive Patterned Magnetic Composite and Double‐Walled Carbon Nanotube Film

AbstractThe revolution of millimeter‐wave (mmWave) technologies is prompting a need for absorption‐dominant EMI shielding materials. While conventional shielding materials struggle in the mmWave spectrum due to their reflective nature, this study introduces a novel EMI shielding film with ultralow reflection (<0.05 dB or 1.5%), ultrahigh absorption (>70 dB or 98.5%), and superior shielding (>70 dB or 99.99999%) across triple mmWave frequency bands with a thickness of 400 µm. By integrating a magnetic composite layer (MCL), a conductive patterned grid (CPG), and a double‐walled carbon nanotube film (DWCNTF), specific resonant frequencies of electromagnetic waves are transmitted into the film with minimized reflection, and trapped and dissipated between the CPG and the DWCNTF. The design factors for resonant frequencies, such as the CPG geometry and the MCL refractive index, are systematically investigated based on electromagnetic wave propagation theories. This innovative approach presents a promising solution for effective mmWave EMI shielding materials, with implications for mobile communication, radar systems, and wireless gigabit communication.

Parameter Extraction of Accelerated Moving Targets under Non-Quasi-Axial Incidence Conditions Based on Vortex Electromagnetic Wave Radar

Vortex electromagnetic wave radar carrying orbital angular momentum can compensate for the deficiency of planar electromagnetic wave radar in detecting motion parameters perpendicular to the direction of electromagnetic wave propagation, thus providing more information for target recognition, which has become a hot research field in recent years. However, existing research makes it difficult to obtain the acceleration and rotation centers of targets under non-quasi-axial incidence conditions of vortex electromagnetic waves. Based on this, this article proposes a variable speed motion target parameter extraction method that combines single element and total element echoes. This method can achieve three-dimensional information extraction of radar targets based on a uniform circular array (UCA). Firstly, we establish a non-quasi-axis detection echo model for variable-speed moving targets and extract echoes from different array elements. Then, a single element echo is used to extract the target’s range slow time profile and obtain the target’s rotation center z coordinate. We further utilize the target linear, angular Doppler frequency shift extremum, and median information to extract parameters such as target acceleration, tilt angle, rotation radius, and rotation center x and y coordinates. We analyzed the impact of different signal-to-noise ratios and motion states on parameter extraction. The simulation results have verified the effectiveness of the proposed algorithm.

Mitigation of reentry blackout via gas injection in arc-heating facility

Communication blackouts during atmospheric reentry pose significant challenges to the safety and adaptability of spacecraft missions. This phenomenon, caused by the attenuation of electromagnetic waves by the plasma surrounding the spacecraft, disrupts communication with ground stations or orbiting satellites. Therefore, it is crucial to decrease the plasma density in the vicinity of the spacecraft to ensure an unobstructed electromagnetic wave communication path. This study proposes a methodology that involves the injection of gas from the vehicle’s wall to create an insulating layer near the surface. This thin layer maintains lower temperatures and reduced plasma density, enabling electromagnetic wave propagation without attenuation. Practical experiments were conducted in an arc-heating facility to simulate atmospheric reentry conditions. The results of the experiments provided empirical evidence of the effectiveness of the technique in mitigating communication blackout phenomena. Numerical fluid analysis within the wind tunnel chamber validated the formation of an air film layer near the experimental model owing to the injected gas. Schlieren imaging revealed distinctive jet shapes, which corroborated the findings of the numerical analysis. The wind tunnel tests that simulated atmospheric reentry environments confirmed the formation of an air film layer through gas injection, which substantiates the reduction in communication blackout. These results have the potential to improve communication reliability in space transport.

2-битные метаповерхности Патчаратнама-Берри с генерацией, интерференцией и гашением орбитального углового момента для широкополосного снижения ЭПР

The radar cross-section (RCS) reduction using non-absorbing digital Patcharatnam-Berry (PB) metasurfaces (MSs), consisting of 2-bit modules with generation, interference and cancellation of vortex electromagnetic waves with orbital angular momentum (OAM) is studied. Each module has a helical PB-phase profile and possesses vortex scattering. Module unit cells contain a shielded dielectric substrate and meta-particles in the form of triple-coupled split-ring resonators. The modules are distinguished by 2-bit coding of the initial tilt angle of the meta-particles 0º, 45º, 90º and 135º. The purpose of the work is to numerically analyze the generation of antiphase vortex beams (VBs) by OAM-modules and to assess the influence of interference and cancellation of antiphase vortices on the structure and order of OAM in the resulting field and the RCS reduction of three digital MSs in the form of 2´2 lattice of 2-bit OAM-modules of different sizes with different topological charges. The scattering characteristics are studied using HFSS for normally incident circularly polarized waves using of the finite element method. The simulation showed that the interference of phase vortices of four OAM-modules forms the main axial vortex and N additional interference side near and far vortices (N depends on the size of the MS). Interference vortex beams create phase singularities and zero the resulting far field in N side directions over the entire forward hemisphere. The intense OAM modes of the main vortex beams are of the fourth or eighth order. The OAM modes of adjacent interference VBs, as a rule, differ in sign. The proposed 2-bit MSs provide wider-angle phase cancellation of vortex fields (compared to 1-bit MSs) and, as a consequence, wider-angle diffuse scattering of the resulting field of the MS, which is important for RCS reduction.

Loss Analysis of the Electromagnetic Metamaterial Applied to Antenna Size Reductions

The research of transformation electromagnetics uses spatial coordinate transformation method to transform Maxwell’s equations for the propagations of electromagnetic waves in space, thereby achieving the goal of designing the path of electromagnetic waves, which eventually leads to a more complex tensor design of its constitutive parameters of metamaterials. This demand for artificial design of material parameters has been combined with the rapid development of micro-scale, molecular-scale, and atomic-scale experimental engineering techniques in recent years, enabling metamaterials to be developed, fabricated, and applied in various frontier fields. In this paper, the metamaterial electromagnetic wave concentrator used to reduce the antenna size is mainly discussed and detailed simulations and researches on the electromagnetic lossy conditions of the metamaterial parameters are given, which can better verify the electromagnetic scattering performance under actual engineering conditions. Solutions and quantitative simulations for the attenuation characteristics are also provided, which can deepen the research on the engineering performance of the metamaterial electromagnetic transformation devices.

Circular dichroism in nonlinear topological Weyl semimetals

In recent years, the field of topological photonics has emerged as a promising area of research due to its potential for the development of new photonic devices with unique properties. Topological Weyl semimetals (TWSs), which are characterized by the presence of Weyl points in their electronic band structure, are one such example of a material with interesting topological properties. In this study, Kerr and Faraday rotations were used to determine the nonlinear characteristics of TWSs. We focused on surfaces where no Fermi arcs are involved, so that Maxwell’s equations would contain some peculiar topological terms. In Weyl semimetals with a specific topology, the distance between Weyl nodes aligned along the z-direction functions as a magnet. This results in a significant polar Kerr/Faraday rotation effect that is proportional to the separation distance, when light is directed onto the surface of the TWS that lacks Fermi arc states. Conversely, when the light is directed onto a surface with Fermi arc states, the Voigt effect is quadratically proportional to the separation distance. We considered electromagnetic wave propagation in a nonlinear Kerr-type medium. We have derived and solved the linear and nonlinear Helmholtz equations for TWSs using the tanh method. Our findings reveal that wave solutions could have some potentially significant implications for the design and optimization of photonic devices based on TWSs.

Spatiotemporal energy‐density distribution of time‐reversed electromagnetic fields

AbstractTime reversal exploits the invariance of electromagnetic wave propagation in reciprocal and lossless media to localize radiating sources. Time‐reversed measurements are back‐propagated in a simulated domain and converge to the unknown source location. The focusing time (i.e. the simulation instant at which the fields converge to the source location) and the source location can be identified using field maxima, entropy, time kurtosis, and space kurtosis. This paper analyses the spatial energy‐density distribution of time‐reversed electromagnetic fields by introducing a convergence metric based on the spatial average and variance of the energy density. It is analytically proven that the proposed metric identifies the focusing time and the source location, with direct links to the source frequency content. The analytical results are verified in a free‐space numerical simulation and the proposed metric is then compared to existing ones in a simulated inhomogeneous medium. Next, this metric is applied and compared in an experimental case study to localize electromagnetic interference sources. The proposed metric outperforms existing ones to identify the focusing time and can also be used to locate the source. Finally, because of its tensorial nature, it can handle anisotropic media, opening the door to quantitative analyses of time‐reversal focusing in metamaterials.

Langmuir wave dynamics and plasma instabilities: Insights from generalized coupled nonlinear Schrödinger equations

This study aims to tackle the generalized coupled nonlinear Schrödinger ([Formula: see text] – [Formula: see text]) equations, with a focus on understanding their physical significance and stability, especially in the realm of plasma physics. These equations are crucial for grasping the complex dynamics of wave interactions within plasma systems, which are fundamental for phenomena like wave-particle interactions, turbulence, and magnetic confinement. We employ analytical methods such as the generalized rational ([Formula: see text]at) and Khater II ([Formula: see text]hat.II) techniques, along with characterizing the system using Hamiltonian principles, to carefully examine the stability of solutions. The relevance of this model extends across various plasma phenomena, including electromagnetic wave propagation, Langmuir wave dynamics, and plasma instabilities. By applying these analytical techniques, we derive solutions and investigate their stability using Hamiltonian dynamics, providing valuable insights into the fundamental behavior of nonlinear plasma waves. Our findings reveal the existence of stable solutions under specific conditions, thus advancing our understanding of plasma dynamics significantly. This research carries significant implications for fields such as plasma physics, astrophysics, and fusion research, where a deep understanding of plasma wave stability and dynamics is crucial. Essentially, our study represents a scholarly effort to offer fresh perspectives on the behavior of [Formula: see text] – [Formula: see text] equations within plasma systems, contributing to the academic discourse on plasma wave phenomena.

Sandwich-Structured Mxene/Waste Polyurethane Foam Composites For Highly Efficient Electromagnetic Interference, Infrared Shielding and Joule Heating.

Electromagnetic interference (EMI) shielding and infrared (IR) stealth materials have attracted increasing attention owing to the rapid development of modern communication and military surveillance technologies. However, to realize excellent EMI shielding and IR stealth performance simultaneously remains a great challenge. Herein, a facile strategy is demonstrated to prepare high-efficiency EMI shielding and IR stealth materials of sandwich-structured MXene-based thin foam composites (M-W-M) via filtration and hot-pressing. In this composite, the conductive Ti3C2Tx MXene/cellulose nanofiber (MXene/CNF) film serves as the outer layer, which reflects electromagnetic waves and reduces the IR emissivity. Meanwhile, the middle layer is composed of a porous waste polyurethane foam (WPUF), which not only improves thermal insulation capacity but also extends electromagnetic wave propagation paths. Owing to the unique sandwich structure of "film-foam-film", the M-W-M composite exhibits a high EMI shielding effectiveness of 83.37dB, and in the meantime extremely low emissivity (22.17%) in the wavelength range of 7-14µm and thermal conductivity (0.19W m-1 K-1), giving rise to impressive IR stealth performance at various surrounding temperatures. Remarkably, the M-W-M composite also shows excellent Joule heating properties, capable of maintaining the IR stealth function during Joule heating.

Numerical investigation of a plasma-dielectric-plasma waveguide with tunable Fano resonances

Resonance and interference phenomena in waveguide systems are remarkable for control of electromagnetic wave propagations, with extensive applications in many areas. This paper introduces a plasma-dielectric-plasma (PDP) waveguide supporting multiple Fano resonances, made of a tooth cavity directly connected to a straight waveguide and a rectangle cavity with plasma holes. Different from metal-insulator-metal (MIM) waveguides at the near-infrared band with nanoscales, the PDP works in the microwave regime and with centimetre dimension. Furthermore, it has a prominent advantage in tunability due to inherent properties of gaseous discharge plasmas. A finite element method is adopted to study transmission responses and field distributions in details. Also, coupled mode and standing wave theories are applied to confirm the validity of numerical results and theoretically analyze Fano spectra, respectively. Results indicate that the number and position of Fano resonances can be modulated by adjusting the number of plasma holes and altering the plasma frequency, respectively. Also, the independent tunability of multiple Fano resonances can be verified by the additional structure. The numerical simulations provide a reference for plasma to modulate electromagnetic waves and may open up a new path for developing tunable microwave devices, especially in the parallel processing of microwave signals.

Attenuation of electromagnetic wave propagation in Martian dust storms

Attenuation of electromagnetic wave propagation in Martian dust storms