Microalgal Production Research Articles

Opportunities for biogas production from algal biomass

Energy security is a critical global challenge in the transition to sustainable development. Anaerobic digestion (AD) offers a promising renewable energy solution that mitigates environmental impacts. Algae, as biomass feedstock, have shown significant potential for bioenergy production; however, their complex chemical composition poses challenges to the efficiency of the AD process. To address these limitations, various pretreatment methods have been applied to enhance biogas production. In this study, we performed a comprehensive meta‐analysis to evaluate the effects of different pretreatments on methane (CH₄) yields from both microalgae and macroalgae. Our results demonstrate that biological, physical, and combined chemical–physical pretreatments significantly improve CH₄ production in microalgae, with increases of up to 141%, 125%, and 151%, respectively. For macroalgae, physical pretreatments were the most effective, leading to a 129% increase in CH₄ yield. We also estimate that utilizing just 10% of the global algal biomass production (3.6 Mt) could generate over 5.5 TWh y−1 of energy. This potential could be doubled with the application of appropriate pretreatment strategies. These findings highlight the role of algae in advancing renewable energy production and contribute to the growing body of knowledge on optimizing AD processes for cleaner energy generation.

New insights into microalgal photobiological hydrogen production: Potential role of aggregation forms in modulating the hydrogenase activity and metabolic properties of microalgae during hydrogen production

Photobiological hydrogen production of microalgae is highly influenced by environmental conditions, and the appropriate microalgal aggregation form is conducive to microalgae overcome environmental limitations and increase their hydrogen production capacity. In this study, the effects of three aggregation methods including self-flocculation, biofilm attachment, and gel immobilization on the photobiological hydrogen production of both prokaryotic Synechocystis sp. and eukaryotic Chlamydomonas reinhardtii were investigated. The results indicated that microalgal aggregates formed via gel immobilization exhibited superior physicochemical properties such as porosity, integrity, and oxygen diffusion coefficients, creating favorable conditions for enhanced hydrogenase activity. Upon gel-immobilization, hydrogen production of Synechocystis sp. and C. reinhardtii exhibited an increase of 1.89 and 2.02-folds, respectively, compared with suspended microalgae. Concurrently, hydrogenase activities increased to 2.07 and 32.9 H2/(mg chlorophyll·h), respectively. The gel-immobilized aggregate form prompted the microalgae to maintain a relatively high photosynthetic activity, with the electron transfer rate reaching more than 1.58 folds of the control. Notably, three aggregated forms also accelerated oxygen consumption, and intracellular organic matter degradation, thereby optimizing electron utilization by microalgal hydrogenase. Furthermore, aggregation up-regulated hydrogenase gene expression in both species, particularly in gel-immobilized groups (2.34- and 4.14-folds increase compared with the control for Synechocystis sp. and C. reinhardtii, respectively). Subsequently, significantly upregulated gene expression related to oxidative phosphorylation and antioxidant systems was observed in C. reinhardtii aggregates, correlating with its relatively higher increase in hydrogen production compared with Synechocystis sp. aggregates. This study elucidated the mechanism by which aggregation strengthens microalgal hydrogen production and offers insights crucial for its industrialization.

Promoting algae separation of forward osmosis by peracetic acid and chitosan quaternary ammonium salt: Purification efficiency, membrane fouling alleviation, and lipid production

Forward osmosis (FO) is a prospective technology for microalgae biomass recovery, whereas severe membrane fouling still limits its application. To improve the separation efficiency of FO, peracetic acid (PAA) oxidation followed by chitosan quaternary ammonium salt (HTCC) coagulation was proposed. The synergistic effect of PAA-HTCC on the characteristics of Chlorella vulgaris and the separation performance of FO were systematically studied, and the mechanism was revealed. With PAA-HTCC treatment, the harvesting efficiency of algal cells was increased to 88.5 %, and algal aggregates with sizes of 100-300 μm were formed while maintaining excellent cell viability. Membrane fouling caused by microalgae was mitigated, with the water flux increased from 15.0 to 19.2 L/(m2·h), and the recovery flux increased to 90.0 %. The lipid production capacity of microalgae was significantly promoted, with the lipid productivity increased from 10.5 to 27.9 mg·L−1·d−1. During PAA oxidation, •OH and •CH3 were the major reactive species, which could remove electronegative organics coated on algal cells, contributing to the aggregation of microalgae in the coagulation by HTCC. Moreover, PAA-HTCC could also provide carbon sources for microalgae growth, thus the water purification efficiency of FO and the lipid production of concentrated microalgae were simultaneously promoted. The proposed strategy has certain significance for water purification and resource utilization of algae.

Microalgal-bacterial co-cultivation on novel bio-coated supports: Evaluation of growth performance in submerged and permeated biofilm cultivation system with cost-benefit assessment

In microalgae mass production, co-cultivation with bacteria and biofilm immobilization hold promise, yet challenges persist in biofilm-based cultivation due to weak cohesion under stress. Hence, a novel bio-coating derived from spent medium and cells (extra-/intra-cellular organic matter from Cylindrotheca fusiformis and Escherichia coli) was applied to microporous membrane in submerged and permeated biofilm systems. Results showed a minimum 25 % improvement in biomass productivity (up to 45 g m−2) on bio-coated membranes in permeated system. Mucopolysaccharides in bio-coating facilitated biofilm development and encouraged a 10-fold higher AOM yield (defense mechanism against shearing force) in submerged systems, but biomass productivity was 10 times lower than permeated system. In permeated system, cells on IOM-coated membranes exhibited the highest biomass growth and lipid yield, potentially addressing the biomass-lipid trade-off. Permeated system with low operating cost around 69 $ kg−1 was a viable cultivation approach, presenting an opportunity to optimize microalgae production facilities.

High-throughput optimization of organic carbon provision strategies enables enhanced arachidonic acid production in novel microalgae

BackgroundMicroalgae are potential sustainable resources for the production of value-added chemicals that can be used as biofuels, pharmaceuticals, and nutritional supplements. Arachidonic acid (ARA), a omega-6 fatty acid, plays a crucial role in infant development and immune response, and can be used in cosmetics and pharmaceuticals. Demand for industrial-scale ARA production is continuously increasing because of its broad applicability. To address this demand, there has been a significant shift towards microorganism-based ARA production. To accelerate large-scale ARA production, it is crucial to select suitable strains and establish optimal culture conditions.ResultsHere, we isolated a novel microalga Lobosphaera incisa CFRC-1, a valuable strain that holds promise as a feedstock for ARA production. Optimal cultivation conditions were investigated using a high-throughput screening method to enhance ARA production in this novel strain. Out of 71 candidates, four organic carbon substrates were identified that could be utilized by L. incisa CFRC-1. Through flask-scale verification, fructose was confirmed as the optimal organic carbon substrate for promoting microalgal growth, total lipid accumulation, and ARA production. Subsequently, we investigated appropriate substrate concentration and cultivation temperature, confirming that the optimal conditions were 30 g L− 1 of fructose and 27 ℃ of temperature. Under these optimized conditions, biomass and ARA production reached 13.05 ± 0.40 g L− 1 and 97.98 ± 7.33 mg L− 1, respectively, representing 9.6-fold and 5.3-fold increases compared to the conditions before optimization conditions. These results achieved the highest biomass and ARA production in flask-scale cultivation, indicating that our approach effectively improved both production titer and productivity.ConclusionsThis study presents a novel microalgae and optimized conditions for enhancing biomass and ARA production, suggesting that this approach is a practical way to accelerate the production of valuable microalgae-based chemicals. These findings provide a basis for large-scale production of ARA-utilizing microalgae for industrial applications.

Thraustochytrids and Algae as Sustainable Sources of Long-Chain Omega-3 Fatty Acids for Aquafeeds

There is limited ability to biosynthesize long-chain omega-3 fatty acids such as EPA and DHA in food webs leading to humans. Seafood is the key source of ω3 LC-PUFA, with aquaculture expected to meet rising global demand; however, marine fish have a high dietary requirement for EPA and DHA themselves. This was traditionally met using unsustainable dietary fish oil and fish meal, but limited supply and environmental concerns have dictated research on replacements. Among the industrial sources of EPA and DHA, microalgae and especially thraustochytrids stand out as resources with high concentrations. Although unicellular, thraustochytrids are not microalgae as they are not photosynthetic but instead are microheterotrophs. This removes the light requirement and facilitates high yields of monoculture for the production of single-cell oils. The availability, in high concentrations, of usually one or the other essential fatty acid permits a calibration of the EPA and DHA dose, which is especially useful as their effects have mainly been considered together in medical and aquaculture research. EPA and DHA have different effects on cell function and are precursors of different bioactive compounds. Using thraustochytrids, microalgae, and heterotrophic dinoflagellates, the importance of DHA has been investigated. DHA was essential for optimizing the growth of the early life stages of scallops and finfish and was preferentially incorporated into fish membrane phospholipids. The production of microalgae and microheterotrophs can contribute to the treatment of wastewater and waste gas, further enhancing their sustainability and reducing the environmental costs of aquaculture.

Environmental impact assessment in microalgal lipid production: carbon footprint and net emissions

This study focuses on analyzing the role of microalgae in mitigating climate change through CO2 capture and lipid production, which can be used in the development of energy products and commercially relevant products. The objective was to evaluate the net CO2 emissions in three lipid production scenarios from microalgae, in addition to analyzing the impact of various biomass pretreatment technologies before lipid extraction. For this purpose, only the emissions directly generated by energy consumption in the process and the amount of CO2 that can be captured by microalgae cultivation were considered. In all three scenarios, CO2 capture during biomass cultivation and emissions associated with maintaining the process in operation were evaluated. The results show that the emissions generated by energy consumption were 3.56 kg-CO2/kg-oil, 2.19 kg-CO2/kg-oil, and 2.36 kg-CO2/kg-oil in scenarios 1, 2, and 3, respectively, while the CO2 emissions captured in microalgae cultivation were three to four times higher, ultimately resulting in negative emissions in all scenarios. The efficiency of CO2 capture per kilogram of oil produced varies between scenarios, suggesting that the choice of technology and process conditions significantly influence the overall environmental impact. This analysis identifies areas of opportunity to improve microalgal biomass utilization processes, highlighting the stages of the process with the greatest impact on the carbon footprint and enabling the comparison of different technologies on the same basis.

Exploring the Impact of Environmental Conditions and Bioreactors on Microalgae Growth and Applications

Microalgae and their bioproducts have diverse applications, including wastewater remediation, CO2 fixation, and the synthesis of nutraceuticals, pharmaceuticals, and biofuels. However, the production of these organisms heavily relies upon environmental conditions, which can significantly impact growth. Furthermore, microalgae cultivation itself can be a source of economic and environmental concerns. Thus, microalgae growth systems have become a critical consideration for both research and industry, to bolster microalgae cultivation and address its accompanying issues. Both open and closed systems, such as raceway ponds and photobioreactors, respectively, are commonly used during the growth process but have their own advantages and drawbacks. However, for microalgae growth, photobioreactors may address most concerns as the system’s design lowers the risk of contamination and provides the ability to control the delivery of desired growth factors. To determine the appropriate system for targeted microalgae cultivation, it is crucial to determine factors such as the scale of cultivation and growth and productivity targets. Additionally, efficient usage of these growth systems and carefully selected incubation factors can aid in addressing some of the economic and environmental issues associated with microalgae production. This review will summarize the current applications of bioreactors in both research and industrial capacities and summarize growth and incubation factors for microalgae.

Enhanced Production of Microalgal Metabolites Through Aeration Coupled with Stirring

Adequate mixing is a key factor for microalgal cultivation to achieve high biomass production, so it is essential to clarify the comparative effects of different mixing methods on microalgal productivity, which has rarely been studied previously. This work therefore aimed to investigate the effects of different mixing methods (stirring, aeration, and aeration coupled with stirring) on the growth and metabolite composition of Chlorella sorokiniana SDEC-18, a strain with potential for large-scale application. The results showed that mixing was beneficial for carbohydrate accumulation, while dual mixing (aeration coupled with stirring) promoted growth and achieved the highest dry mass and metabolite productivities (including carbohydrates, proteins, and lipids) through enhancement of light energy capture in the entire system. The stirring speed in the dual mixing approach of aeration coupled with stirring was also considered: the optimal condition was found to be 800 rpm. The maximum biomass was 3.56 g L−1, and the carbohydrate productivity was as high as 119.45 mg L−1 d−1, which was the highest metabolite productivity (higher than proteins or lipids), obtained from aeration coupled with stirring at 800 rpm. Our study suggests that aeration coupled with stirring provides a feasible strategy for microalgal production, due to the optimal availability of CO2 and light achieved through effective mixing.

Intensified microalgae production and development of microbial communities on suspended carriers and municipal wastewater

Wastewater represents an alternative source of nutrients in which to grow microalgae, whilst improving the quality of the wastewater, and reducing the downstream treatment required. However, commercialisation of microalgal cultures for such duties faces a number of challenges, predominantly high cost and low productivity. Suspended-solid reactors (ssPBR) can reduce the operational costs, while promoting attached and suspended microalgae growth. In the present study, a novel approach was developed by integrating microalgal wastewater treatment with carrier systems to favour the growth of both attached and suspended cells of T. obliquus. This study found that T. obliquus was able to uptake nutrients from municipal wastewater, achieving removals of 99.3–99.9 % NH3-N, 54.5–88.5 % PO43− and 92.8–94.5 % DTC. The addition of a 12.5 % volumetric fill ratio of carriers in ssPBRs produced higher microalgal cell productivity (1.2·106 ± 2.5·105 cell ml−1 d−1) than the control (4.3·105 ± 2.8·105 cell ml−1 d−1). MinION nanopore sequencing was conducted to assess the impact of microalgal and carrier treatment on wastewater bacterial communities. It was found not only that bacterial communities had changed after the treatment but also the ones attached differed from the ones suspended. Untreated wastewater was characterised by the abundance of sewer bacteria genera such as Aliarcobacter and Arcobacter, whilst, after treatment, microbial communities were characterised by the presence of photosynthetic freshwater (Limnococcus, Stanieria) and bioremediation-like bacteria genera (Pseudomonas, Rheinheimera). In conclusion, the addition of 12.5 % fill carrier ratio increased microalgal productivity, while stimulating changes in the algal microbiome, and creating distinctly different populations in the free and attached environments.

Unlocking 3D printing technology for microalgal production and application

AbstractMicroalgae offer a promising alternative for sustainable nutritional supplements and functional food ingredients and hold potential to meet the growing demand for nutritious and eco-friendly food alternatives. With the escalating impacts of global climate change and increasing human activities, microalgal production must be enhanced by reducing freshwater and land use and minimizing carbon emissions. The advent of 3D printing offers novel opportunities for optimizing microalgae production, though it faces challenges such as high production costs and scalability concerns. This work aims to provide a comprehensive overview of recent advancements in 3D-printed bioreactors for microalgal production, focusing on 3D printing techniques, bio-ink types, and their applications across environmental, food, and medical fields. This review highlights the benefits of 3D-printed bioreactors, including improved mass transfer, optimized light exposure, enhanced biomass yield, and augmented photosynthesis. Current challenges and future directions of 3D printing in microalgal production are also discussed to offer new insights into boosting microalgal cultivation efficiency for expanded applications.

Enhancement of Growth and Lipid Production in Microalgae Using Aggregation-Induced Emission Based Luminescent Material for Sustainable Food and Fuel.

AIEbased nanomaterials are progressively gaining momentum owing to their evolvement into an interdisciplinary field ranging from biomass and biomolecule yield to image-guided photodynamic therapy. This study focuses on a novel strategy to enhance growth, lipid accumulation, and in vivo fluorescence visualisation in green microalgae Chlamydomonas reinhardtii using AIE nanoparticles to quantify radical changes. The absorption of AIE photosensitiser, TTMN was recorded from 420 to 570 nm with a peak at 500 nm, and the emission ranged from 550 to 800 nm with a peak at 650 nm. As a ROSmolecule, H2O2 generation of TTMN in C. reinhardtii cells was detected with AIE nanoprobes TPE-BO. H2O2 accumulation increased with the increase of TTMN concentrations. The maximum growth was observed at 10 µM TTMN-exposed C. reinhardtii cells. Significant lipid accumulation was found in both 10 and 15 µM TTMN-treated cells. For lipid visualisation, an AIE nanoprobe, 2-DPAN was used, and superior fluorescence was determined and compared with the traditional BODIPY dye. Cytotoxicity analysis of 10 µM TTMN on the HaCat cell line with 86.2% cell viability revealed its high biocompatibility on living cells. This AIE-based nanotechnology provides a novel approach for microalgae-derived sustainable biomass and eco-friendly biofuel production.

Production and Characterization of Duckweed Bio-Oil via Pyrolysis: A Renewable Alternative to Fossil Fuels

Duckweed bio-oil has gained significant interest due to its exceptional benefits in raw material utilization and eco-friendliness. Research on microalgae cultivation and pyrolysis production lines is vital to enhancing the efficiency of duckweed biomass consumption for renewable energy. In this work, the pyrolysis process was applied to create bio-oil from duckweed. A fixed-bed reactor was connected to condensers, with heat delivered via a gas burner, and a thermocouple used to measure the reactor’s temperature. A stopwatch was used to track the elapsed time until the last drop of product was visible from the system. The results show that both duckweed oils are heavy oils, with an API gravity of 8.73, densities of 1.079 g/cm³ and 1.006 g/cm³, high viscosities of 8.24 mm²/s and 9.32 mm²/s, respectively, a specific gravity of 1.01, a high flash point of 96 °C, and a pour point of 16 °C. The research confirms that duckweed biomass can be pyrolyzed to produce bio-oil. GC/MS analysis was conducted on the generated bio-oil, revealing the presence of multiple polyaromatic hydrocarbons. Consequently, carbon chain elements (C8-C28) are present in duckweed bio-oils. According to the findings, duckweed-derived bio-oil shows great promise as a fossil fuel alternative. This study suggests that, since microalgae have the potential to be a viable replacement for fossil fuels, efforts should be made to scale up microalgae production from the laboratory to industrial levels.

Enhancing carotenoid accumulation in Dunaliella bardawil by combined treatments with fulvic acid and optimized culture conditions

Natural carotenoids from microalgae have received more attention as an alternative source. In this study, fulvic acid (FA), a plant growth regulator, was used to enhance carotenoid accumulation in microalgae Dunaliella bardawil rich in lutein. However, the addition of FA promoted pigment synthesis but also exhibited an inhibitory effect on biomass. Therefore, the optimization of culture conditions was performed to further enhance carotenoid accumulation, including high light stress (10,000 lx) and the two-stage cultivation comprising 1-aminocyclopropane-1-carboxylic acid (ACC) and FA. Under both culture conditions, the growth inhibition caused by FA was alleviated, leading to a further increase in the contents of chlorophylls and carotenoids. HPLC analysis revealed that the production of lutein, α-carotene and β-carotene increased by 0.44-, 0.37- and 0.54-fold under the treatment of 400 mg/L FA with high light intensity and 0.91-, 1.15- 0.29-fold under the two-stage cultivation comprising 11 mM ACC and 500 mg/L FA. Furthermore, algal cells under FA treatment and the two-stage cultivation stained with Bodipy505/515 emitted stronger fluorescence under a laser confocal microscope, suggesting that lipid accumulation was increased. Additionally, the transcription levels of carotenogenic genes were also found to be up-regulated by qRT-PCR. These results indicated an enhancement in both the storage capacity and synthesis of carotenoids in D. bardawil. This study revealed the potential application of plant growth regulators in promoting carotenoid accumulation in D. bardawil which could be further improved by optimizing the culture conditions, providing a reference for efficient carotenoid production in microalgae.

Unveiling significant roles of phytohormone 6-benzylaminopurine in empowering Phaeodactylum tricornutum for high-salinity wastewater treatment and bioresource recovery

High-salinity presents significant challenges in microalgal wastewater treatment and bioresource recovery due to salinity stress. This study explored the use of salt-tolerant microalgae in conjunction with phytohormone regulation. 1 µM 6-benzylaminopurine increased the biomass of Phaeodactylum tricornutum by 38.3 % and enhanced lipid production by 36.8 %. 6-benzylaminopurine significantly improved the removal of inorganic carbon, total nitrogen, and total phosphorus by 85.2 %, 27.4 %, and 31.9 %. Specifically, 6-benzylaminopurine improved K+ transportation by 71.0 %, increased the activity of Ca2+ transport ATPase and Ca2+ sensors by 49.0 %–83.0 %, optimized osmotic balance, and alleviated salt-induced damage. The contents of proline and extracellular polymers increased by 34.8 % and 35.5 %. A 38.4 % reduction in reactive oxygen species indicated that high-salinity stress was mitigated. The analysis of Sustainable Development Goals showed a 56.2 % improvement in Affordable and Clean Energy. Overall, these findings further highlighted the promising application of the phytohormone 6-benzylaminopurine in microalgal high-salinity wastewater treatment and lipid production.

A reduced-order hybrid model for photobioreactor performance and biomass prediction

This paper introduces a hybrid approach for photobioreactor modeling tailored to microalgae cultivation, combining data-driven and mechanistic concepts to improve modeling efficiency and practicality for industrial scale-up applications. Most growth models for microalgae are nonlinear and require experimental measurement of several parameters. The aim of this work is to develop linear practical models for monitoring purposes. A model based on linear coefficients and polynomial features is proposed, balancing interpretability with non-linear representation focusing on model transparency. To simplify the growth model, Taylor series expansion is applied to the Monod and logistic population models. Two scale-specific models are developed and evaluated, offering practical solutions for monitoring microalgae growth in photobioreactors. Therefore, this reduced order representation allows the biomass growth rate to be dependent directly on the biomass concentration. These models do not require exhaustive data collection of substrate concentration over time, making them cost-effective and efficient for industrial applications. This work provides a step forward in photobioreactor modeling, contributing to the sustainable production of microalgae.

A Novel Algal–Algal Microbial Fuel Cell for Enhanced Chemical Oxygen Demand Removal

To enhance the removal of COD (Chemical Oxygen Demand) by microalgae, this study constructed a novel microalgae–microalgae microbial fuel cell system (AA-MFC). It investigated the coupling relationship between the COD treatment efficiency at the anode and the production of high-value microalgal products at the cathode, as well as explored the effects of different initial inoculum densities and light–dark cycles. The experiment first measured the operational performance of the newly constructed AA-MFC in open-circuit and closed-circuit modes, demonstrating that this novel AA-MFC could start up rapidly within 32 h and operate stably. The results showed that the AA-MFC enhanced the removal of COD and the growth of microalgae biomass at the anode while maintaining stable power generation. When the initial inoculation density of the anode was 1.2 × 108 cell/cm2 and the light–dark cycle time was 18:6 h, the AA-MFC had the most obvious promoting effect on the COD removal of the anode. Compared with normal culture conditions, the COD removal rate increased by 26.0% to 96.1%. These results indicate that the AA-MFC can not only effectively remove pollutants, but also promote the accumulation of high-value microalgae biomass.

Numerical and Experimental Study of Raceway Pond For Production of Microalgea in Tunisia

The objective of this work is to enhance the production of microalgae under better conditions from microalgae production units. The system studied is a raceway pond constructed in the city of Monastir in Tunisia. Using the commercial CFD software ANSYS Fluent, a series of simulations were developed to validate the hydrodynamic characteristics of the pond. The results were validated by experimental measurements of the fluid velocity in both channels of the system. The standard turbulence model k-ɛ was used to model the turbulence created by the impeller of the fluid flow. The meshing effect was used to reduce the computation time of the simulation. The effect of the velocity inlet and the position of the paddle wheel in the fluid channels on the system behavior was examined .The effect of the inlet velocity and the position of the paddle wheel in the fluid channels on the system behaviour was investigated. The numerical results show good agreement with the experimental measurements. In fact, the error between the numerical and the experimental results is recorded acceptable and is small than 6.38%.

Suspended Particulate Organic Matter Supports Mesopredatory Fish Across a Tropical Seascape

Understanding the sources of primary production supporting marine food webs is important for conserving critical habitats. However, the importance of allochthonous versus autochthonous production is often unclear. We identify the sources of primary production supporting three species of predatory fish (Lutjanus carponotatus, Lutjanus fulviflamma, and Lethrinus punctulatus) in the Dampier Archipelago, Western Australia. The proportions of mangrove, seagrass, macroalgae, and suspended particulate organic matter (SPOM) assimilated by fish of different life-history stages and from different habitats were determined using stable isotopes and Bayesian mixing models. While contributions of sources varied among species and habitats, we found that SPOM was an important energetic resource for both adults and juveniles of all three fish species. Juvenile L. carponotatus and L. punctulatus inhabiting macroalgal habitats assimilated more seagrass- and macroalgae-derived material than fish from coral or mangrove habitats, while reliance on mangrove carbon was generally limited overall. Assimilation of macrophyte-derived material decreased throughout ontogeny for L. carponotatus, while L. fulviflamma relied on a combination of SPOM and seagrass into adulthood. The contribution of macroalgae and SPOM to the diets of juvenile L. punctulatus and L. carponotatus from macroalgal habitats varied spatially but was unrelated to seascape configuration, habitat quality, or hydrodynamic conditions. While mixing models suggested a modest degree of trophic connectivity, cross-habitat trophic subsidies provided by macrophytes play a minor role in supporting the studied fish of either life-history stage. Instead, microalgal production predominantly fuels the productivity of predatory fish in this turbid, macrotidal system.

Development and experimental performance evaluation of a small-scale aquavoltaic system for microalgae production

The primary objective of this study is to develop a small aquavoltaic system and evaluate key parameters, including dissolved oxygen (DO), pH, water temperature and dead zones in an open raceway pond to improve the conditions for the production of microalgae while generating electricity. The key variable parameters examined were the rotation speed of a paddle wheel at 10, 20 and 30 rpm, water depth at 15, 25 and 35 cm and response time at 0.5, 1 and 1.5 h were evaluated during May 9–15, 2023. Response Surface Methodology (RSM) and Central Composite Design (CCD) were used to optimize these parameters for acheiving DO levels suitable for microalgae production. The findings showed that increasing the rotation speed of a paddlewheel at the appropriate water depth significantly influences the flow rate, thereby controling DO levels. A maximum DO value of 6.94 mg/l was achieved after 1 h at a water depth of 25 cm and the paddle wheel rotation speed of 20 rpm. Increasing the rotation speed from 10 to 30 rpm resulted in DO values within the optimal range of 6–7 mg/l, reducing dead zones from 21.05 % to 9.16 %. However, with a paddle wheel spinning at 10 rpm, DO decreased below 5 mg/l with increasing water depth and minimal shading, with pH reaching a minimum of 6.8 ppm. Addiotionally, the experiments revealed no significant difference in efficiency between modules installed in open ponds and those installed on the ground over short time periods. The economic analysis indicated that spirulina production costs are 7 % higher with the non-aquavoltaic system due to non-solar electricity use. Furtehrmore, the cost of spirulina produced with the aquavoltaic system was 0.4975 USD/g at a 5 % interest rate and 0.331 USD/g at a 10 % interest rate in the fifth year. The current study underlines that aquavoltaics could have the potential to further increase the production of microalgae and thus reduce production costs. This opens up opportunities for long-term research leading to further optimization between energy production and environmental sustainability in aquaculture systems.