Production Rate Research Articles

Growth and population structure of Lodoicea maldivica in natural stands in Seychelles.

We monitored leaf production in seedlings, trunkless juvenile, immature, and mature male and female plants of the dioecious palm, Lodoicea maldivica, and studied how internode length changed with trunk height. The fieldwork was conducted in closed forest on Praslin Island and degraded forest on Curieuse Island. Data on numbers of leaves produced and rates of leaf production were used to estimate plant age. On Praslin, the interval between successive leaves increased from 0.47/0.52 years in male/female plants to 4.2 years in seedlings, and on Curieuse from 0.41/0.49 to 2.3 years. Estimated leaf lifespan was 6.4-6.8 years in mature palms and much longer in seedlings and juveniles. On Praslin, internode length increased from the base of the trunk to a mean of 14 cm at leaf 21, before declining to 2.75 cm above leaf 100. Mean internode length of the smaller palms on Curieuse was 1.9 cm and varied little with height. Plants at the same development stage varied widely in age. On Praslin, median time to maturity was 77 (range: 32-209) and on Curieuse 83 (31-191) years. The tallest palms on Praslin (28.4 m trunk height) and Curieuse (8 m) were estimated at 442 and 232 years old, respectively. The ageing method was used to interpret height data of different populations. All showed a marked decline in regeneration in the 19th or early 20th centuries, probably caused by fires. We conclude that slow growth makes this species very vulnerable to disturbance, especially from fire.

Temperature and composition dependence modeling of viscosity and electrical conductivity of low-activity waste glass melts

The development of models that accurately relate the properties of a glass melt to its temperature and composition is important for glass formulation, melter control, and modeling the melt flow, refractory corrosion, and production rate. Using a database consisting of more than 4,000 data points measured between 900 °C and 1250 °C for over 600 unique low-activity waste glass compositions, we developed models for the melt viscosity and electrical conductivity. Models based on the Gaussian process regression approach outperformed models based on the Vogel–Fulcher–Tammann equation according to four standard metrics and yielded reliable prediction intervals. The models found primarily linear effects between properties and individual components, except for the effect of the Na2O mass fraction on the electrical conductivity. The effects were found to be consistent with current theories on physical processes involved with those properties.

Beyond Conventional Catalysts: Monoelemental Tellurium as a Game Changer for Piezo-Driven Hydrogen Evolution.

The increasing demand for clean hydrogen production over fossil fuels necessitates the development of sustainable piezoelectrochemical methods that can overcome the limitations of conventional electrocatalytic and photocatalytic approaches. In this regard, existing piezocatalysts face challenges related to their low piezoelectricity or active site coverage for hydrogen evolution reaction (HER). Driven by global environmental concerns, there is a compelling push to engineer practical materials for highly efficient HER. Herein, monoelemental 2D tellurium (Te) is presented as a class of layered chalcogenide with a non-centrosymmetric crystal structure (P3121 space group). The refined Te nanosheets demonstrate an unprecedented highly efficient H2 production rate ≈9000µmolg-1h-1 under ultrasonic mechanical vibration due to built-in piezo-potential in the system. The remarkable piezocatalytic performance of Te nanosheets arises from a synergistic interplay between their semi-metallic nature, favorable free energy landscape, enhanced electrical conductivity and outstanding piezoelectricity. As a proof of concept, the theoretical approach based on Density Functional Theory (DFT) validates the findings due to the gradual exposure of active sites on the Te nanosheets leading to a self-optimized catalytic performance for hydrogen generation. Therefore, mechanically driven Te emerges as a promising piezocatalyst with the potential to revolutionize highly efficient and sustainable technology for futuristic applications.

Improving Blockchain Consistency Bound by Assigning Weights to Random Blocks

Ironclad Method Boosts Blockchain Consistency and Speeds up Block Production Researchers have developed a novel method called Ironclad to address the scalability limitations of blockchains based on the Nakamoto consensus protocol. Although these blockchains have shown promise in various applications, the consensus properties of the protocol impose inherent scalability constraints. A key property, known as consistency, poses a challenge by presenting a trade-off between block production speed and the system’s security against adversarial attacks. To overcome this, the researchers propose the Ironclad method, which introduces a unique approach by assigning different weights to randomly selected blocks. By applying the Ironclad method to the original Nakamoto protocol and conducting rigorous analysis of its consensus properties, the researchers demonstrate a significant improvement in the consistency bound. This advancement allows for a much faster block production rate compared with the original protocol while maintaining the same level of security guarantees. The Ironclad method presents a promising solution to enhance blockchain scalability, overcoming the limitations of the Nakamoto consensus protocol. This breakthrough has the potential to unlock new possibilities for blockchain applications, paving the way for improved transaction speeds and increased efficiency in various industries.

Unbiased photoelectrochemical H2O2 coupled to H2 production via dual Sb2S3-based photoelectrodes with ultralow onset potential.

The productions of hydrogen peroxide (H2O2) and hydrogen (H2) in a photoelectrochemical (PEC) water splitting cell suffer from an onset potential that limits solar conversion efficiencies. The formation of H2O2 through two-electron PEC water oxidation reaction competes with four-electron oxidation evolution reaction. Herein, we developed the surface selenium doped antimony trisulfide photoelectrode with the integrated ruthenium cocatalyst (Ru/Sb2(S,Se)3) to achieve the low onset potential and high Faraday efficiency (FE) for selective H2O2 production. The photoanode exhibits an average FE of 85% in the potential range of 0.4-1.6 VRHE and the H2O2 yield of 1.01 μmol cm-2 min-1 at 1.6 VRHE, especially at low potentials of 0.1-0.55 VRHE with 80.4% FE. Impressively, an unassisted PEC system that employs light and electrolyte was constructed to simultaneously produce H2O2 and H2 production on bothRu/Sb2(S,Se)3photoanode and the Pt/TiO2/Sb2S3photocathode. The integrated system enables the average PEC H2O2 production rate of 0.637 μmol cm-2 min-1 without applying any addition bias. This is the first demonstration that Sb2S3-based photoelectrodes exhibit H2O2/H2 two-side production with a strict key factor of the system, which represents its powerful platform to achieve high efficiency and productivity and the feasibility to facilitate value-added products in neutral conditions.

Scaling the polymerization of polyaldehydes through continuous flow synthesis

AbstractA plug flow reactor was constructed to scale the synthesis of metastable, phthalaldehyde-based polymers to achieve production rates of 1–2 kg per day. The flow-induced mixing and in-line polymerization quench and precipitation sequences resulted in improved polymer purity and long-term stability compared to the same materials made from a conventional batch process. Cryogenic rheology was used to probe the complex fluid dynamics encountered during the polymerization of PPA homopolymers. It is envisioned that this continuous flow manufacturing approach could be extended to other low ceiling temperature or aldehyde monomer systems to help implement and support a plastic circular economy. Graphical abstract

Thienyl-fused dibenzothiophene-S,S-dioxide based conjugated polymer toward highly efficient photocatalytic hydrogen production

Dibenzothiophene-S,S-dioxide (BTDO) is one of the cutting-edge electron-acceptor monomers for designing conjugated polymer based organic materials toward photocatalytic H2 production from water. Normally, structure design of BTDO containing donor-acceptor (D-A) polymer photocatalyst mainly focuses on screening electron-donor motifs, the importance of modification on BTDO molecular toward improving charge carrier separation and photocatalytic performance is always ignored. Herein, a novel thienyl-fused BTDO building block (BTDO-DT) is prepared and utilized to synthesize B-BTDO-DT polymer photocatalyst by Sonogashira-Hagihara cross-coupling polycondensation using 1,4-Diethynylbenzene (B) and BTDO-DT as monomers. Experimental and density functional theory (DFT) calculation results demonstrate that modification of BTDO by thiophene not only enlarges light absorption region and promotes photogenerated e−/h+ separation, but also decreases H atom adsorption free energy (ΔGH*) on oxygen atom in the OSO group. As a result, B-BTDO-DT exhibits an outstanding visible light induced photocatalytic H2 production rate of 156.6 μmol h−1 using 30 mg catalyst without Pt cocatalyst, which is 4.5 times higher than that of B-BTDO. And the H2 production rate of B-BTDO-DT is further improved to be 259.8 μmol h−1 with 2.0 wt% Pt as co-catalyst. The present work may open a new direction for the design of conjugated polymer based photocatalysts with high photocatalytic activities.

Numerical investigation of soot formation in methane/n-heptane laminar diffusion flame doped with hydrogen at elevated pressure

The addition of hydrogen in a dual-fuel mode based on natural gas and diesel offers great potential for improving engine efficiency and reducing emissions. Therefore, detailed numerical simulations have been used to explore the effects of soot formation characteristics of natural gas-diesel dual-fuel engines doped by hydrogen at elevated pressure. Numerical simulations are compared with available experimental data, the effects of H2 addition on soot formation in laminar CH4 + n-heptane, H2 + CH4 + n-heptane, FH2 + CH4 + n-heptane diffusion flames at 2, 4, 6 and 8 atm are simulated, FH2 is added to separate the H2 chemical effects. The results show that the dilution and thermal effects of H2 inhibit soot formation, while the chemical effects of H2 promote soot formation under different pressures. The addition of H2 increases the concentration of H and OH radicals, which promotes the formation of C2H2 and benzene (A1). By simplifying the reaction path and analyzing the production rate of A1, the mechanism of H2 addition to promote A1 formation is illustrated. The concentrations of polycyclic aromatic hydrocarbon (PAH) pyrene (A4), benzo(ghi)fluoranthene (BGHIF) and benzo(a)pyrene (BAPYR) are inhibited at higher pressures that result in lower inception and condensation rates. Therefore, the increase of hydrogen abstraction acetylene addition (HACA) rate is the main reason for the increase of soot formation under chemical effects. While the O2 oxidation rate decreases and the OH oxidation rate increases, that is due to the decrease of O2 concentration and the increase of OH concentration in the soot formation area under chemical effects.

Optimizing Light Dynamics: Designing ANi-MOF Functionalized g-C3N4Type II Heterostructure and a Ti3C2 MXene Schottky Junction for Efficient Photocatalytic H2 Production.

The photocatalytic production of hydrogen (H2) from water is a vital avenue towards sustainable energy and addressing global environmental challenges. To maximize efficiency, harnessing the synergistic effects of multiple co-catalysts is essential, as these interactions can significantly enhance performance. In this study, we introduce a ternary heterojunction composed of a nickel-imidazole framework (Ni-MOF), graphitic carbon nitride (CN), and Ti3C2 MXene (TC), employing solvothermal and wet impregnation methods, featuring a well-designed Type II heterojunction and a noble metal-free Schottky junction for efficient hydrogen evolution. The Type II heterojunction between Ni-MOF and CN minimizes charge carrier recombination and promotes photogenerated electron generation, while TC as an electron acceptor enhances electron capture, increases participation in surface reactions, and augments active sites. Consequently, the Ni-MOF/CN/TC hybrid catalyst achieves outstanding photocatalytic hydrogen evolution under visible light, with a peak production rate of 1044.46 μmol/g over 3 hours, surpassing CN by 13 fold and Ni-MOF/CN by 50%. This work provides insights into MXene-based ternary systems, emphasizing the potential for enhanced light absorption and efficient charge separation, making it a promising platform for photocatalytic applications.

Magnetic-guided nanocarriers for ionizing/non-ionizing radiation synergistic treatment against triple-negative breast cancer

BackgroundTriple-negative breast cancer (TNBC) is a subtype of breast cancer with the worst prognosis. Radiotherapy (RT) is one of the core modalities for the disease; however, the ionizing radiation of RT has severe side effects. The consistent development direction of RT is to achieve better therapeutic effect with lower radiation dose. Studies have demonstrated that synergistic effects can be achieved by combining RT with non-ionizing radiation therapies such as light and magnetic therapy, thereby achieving the goal of dose reduction and efficacy enhancement.MethodsIn this study, we applied FeCo NPs with magneto thermal function and phototherapeutic agent IR-780 to construct an ionizing and non-ionizing radiation synergistic nanoparticle (INS NPs). INS NPs are first subjected to morphology, size, colloidal stability, loading capacity, and photothermal conversion tests. Subsequently, the cell inhibitory and cellular internalization were evaluated using cell lines in vitro. Following comprehensive assessment of the NPs’ in vivo biocompatibility, tumor-bearing mouse model was established to evaluate their distribution, targeted delivery, and anti-tumor effects in vivo.ResultsINS NPs have a saturation magnetization exceeding 72 emu/g, a hydrodynamic particle size of approximately 40 nm, a negatively charged surface, and good colloidal stability and encapsulation properties. INS NPs maintain the spectral characteristics of IR-780 at 808 nm. Under laser irradiation, the maximum temperature was 92 °C, INS NPs also achieved the effective heat temperature in vivo. Both in vivo and in vitro tests have proven that INS NPs have good biocompatibility. INS NPs remained effective for more than a week after one injection in vivo, and can also be guided and accumulated in tumors through permanent magnets. Later, the results exhibited that under low-dose RT and laser irradiation, the combined intervention group showed significant synergetic effects, and the ROS production rate was much higher than that of the RT and phototherapy-treated groups. In the mice model, 60% of the tumors were completely eradicated.ConclusionsINS NPs effectively overcome many shortcomings of RT for TNBC and provide experimental basis for the development of novel clinical treatment methods for TNBC.

Dietary silymarin improves performance by altering hepatic lipid metabolism and cecal microbiota function and its metabolites in late laying hens

BackgroundLiver lipid dysregulation is one of the major factors in the decline of production performance in late-stage laying hens. Silymarin (SIL), a natural flavonolignan extracted from milk thistle, is known for its hepatoprotective and lipid-lowering properties in humans. This study evaluates whether SIL can provide similar benefits to late-stage laying hens. A total of 480 68-week-old Lohmann Pink laying hens were randomly assigned into 5 groups, each group consisting of 6 replicates with 16 hens each. The birds received a basal diet either without silymarin (control) or supplemented with silymarin at concentrations of 250, 500, 750, or 1,000 mg/kg (SIL250, SIL500, SIL750, SIL1000) over a 12-week period.ResultsThe CON group exhibited a significant decline in laying rates from weeks 9 to 12 compared to the initial 4 weeks (P = 0.042), while SIL supplementation maintained consistent laying rates throughout the study (P > 0.05). Notably, the SIL500 and SIL750 groups showed higher average egg weight than the CON group during weeks 5 to 8 (P = 0.049). The SIL750 group had a significantly higher average daily feed intake across the study period (P < 0.05), and the SIL500 group saw a marked decrease in the feed-to-egg ratio from weeks 5 to 8 (P = 0.003). Furthermore, the SIL500 group demonstrated significant reductions in serum ALT and AST levels (P < 0.05) and a significant decrease in serum triglycerides and total cholesterol at week 12 with increasing doses of SIL (P < 0.05). SIL also positively influenced liver enzyme expression (FASN, ACC, Apo-VLDL II, FXR, and CYP7A1; P < 0.05) and altered the cecal microbiota composition, enhancing species linked to secondary bile acid synthesis. Targeted metabolomics identified 9 metabolites predominantly involved in thiamin metabolism that were significantly different in the SIL groups (P < 0.05).ConclusionsOur study demonstrated that dietary SIL supplementation could ameliorate egg production rate in late stage laying hens, mechanistically, this effect was via improving hepatic lipid metabolism and cecal microbiota function to achieve. Revealed the potentially of SIL as a feed supplementation to regulate hepatic lipid metabolism dysregulation. Overall, dietary 500 mg/kg SIL had the best effects.Graphical

In vivo turnover and biodistribution of soluble AXL: implications for biomarker development

Soluble biomarkers are paramount to personalized medicine. However, the in vivo turnover and biodistribution of soluble proteins is seldom characterized. The cleaved extracellular domain of the AXL receptor (sAXL) is a prognostic biomarker in several diseases and a predictive marker of AXL targeting agents. Plasma sAXL reflects a balance between production in tissues with lymphatic transport into the circulation and removal from blood by degradation or excretion. It is unclear how this transport cycle affects plasma sAXL levels that are the metric for biomarker development. Radiolabeled mouse sAxl was monitored after intravenous injection to measure degradation and urinary excretion of sAxl, and after intradermal injection to mimic tissue or tumor production. sAxl was rapidly taken-up and degraded by the liver and kidney cortex. Surprisingly, intact sAxl was detectable in urine, indicating passage through the glomerular filter and a unique sampling opportunity. The structure of sAxl showed an elongated, flexible molecule with a length of 18 nm and a thickness of only 3 nm, allowing passage through the glomerulus and excretion into the urine. Intradermally injected sAxl passed through local and distant lymph nodes, followed by uptake in liver and kidney cortex. Low levels of sAxl were seen in the plasma, consistent with an extended transit time from local tissue to circulation. The rapid plasma clearance of sAxl suggests that steady-state levels in blood will sensitively and dynamically reflect the rate of production of sAxl in the tissues but will be influenced by perturbations of liver and kidney function.

Polyoxometalate-HKUST-1 composite derived nanostructured Na-Cu-Mo2C catalyst for efficient reverse water gas shift reaction.

Transforming CO2 to CO via reverse water-gas shift (RWGS) reaction is widely regarded as a promising technique for improving the efficiency and economics of CO2 utilization processes. Moreover, it is also considered as a pathway towards e-fuels. Cu-oxide catalysts are widely explored for low-temperature RWGS reactions; nevertheless, they tend to deactivate significantly under applied reaction conditions due to the agglomeration of copper particles at elevated temperatures. Herein, we have synthesized homogeneously distributed Cu metallic nanoparticles supported on Mo2C for the RWGS reaction by a unique approach of in situ carburization of metal-organic frameworks (MOFs) using a Cu-based MOF i.e. HKUST-1 encapsulating molybdenum-based polyoxometalates. The newly derived Na-Cu-Mo2C nanocomposite catalyst system exhibits excellent catalytic performance with a CO production rate of 3230.0 mmol gcat-1 h-1 with 100% CO selectivity. Even after 250 h of a stability test, the catalyst remained active with more than 80% of its initial activity.

Highly Dispersed Pd-CeOx Nanoparticles in Zeolite Nanosheets for Efficient CO2-Mediated Hydrogen Storage and Release.

Formic acid (FA) dehydrogenation and CO2 hydrogenation to FA/formate represent promising methodologies for the efficient and clean storage and release of hydrogen, forming a CO2-neutral energy cycle. Here, we report the synthesis of highly dispersed and stable bimetallic Pd-based nanoparticles, immobilized on self-pillared silicalite-1 (SP-S-1) zeolite nanosheets using an incipient wetness co-impregnation technique. Owing to the highly accessible active sites, effective mass transfer, exceptional hydrophilicity, and the synergistic effect of the bimetallic species, the optimized PdCe0.2/SP-S-1 catalyst demonstrated unparalleled catalytic performance in both FA dehydrogenation and CO2 hydrogenation to formate. Remarkably, it achieved a hydrogen generation rate of 5974 molH2 molPd-1 h-1 and a formate production rate of 536 molformate molPd-1 h-1 at 50 °C, surpassing most previously reported heterogeneous catalysts under similar conditions. Density functional theory calculations reveal that the interfacial effect between Pd and cerium oxide clusters substantially reduces the activation barriers for both reactions, thereby increasing the catalytic performance. Our research not only showcases a compelling application of zeolite nanosheet-supported bimetallic nanocatalysts in CO2-mediated hydrogen storage and release but also contributes valuable insights towards the development of safe, efficient, and sustainable hydrogen technologies.

Pyrolytic hydrocarbon generation characteristics of the Chang 7 shale based on different experimental methods: Implications for shale oil and gas in the Ordos Basin

Shale oil and gas resources are abundant in the Chang 7 shale of the Yanchang Formation in Ordos Basin. To determine the characteristics and influencing factors of hydrocarbon generation evolution of the Chang 7 shale, a series of thermal simulation experiments were conducted on low‐maturity shale and kerogen samples. The results indicate that the maximum yield of shale oil are 294.5 and 304.3 mg/g TOC for kerogen sample at heating rates of 20 and 2°C/h, and the corresponding experimental temperatures are 360.2°C and 408.0°C, respectively. The utilization of lower heating rates is favourable for shale oil generation and it is recommended to employ a lower heating rate during in situ heating processes to maximize the economic benefits. The formation of crude oil cracking gas begins when simulating temperature exceeds 528.0°C (Easy Ro 2.6%) at a heating rate of 20°C/h and 480.0°C (Easy Ro 2.5%) at a heating rate of 2°C/h, as indicated by the carbon isotopic composition of gaseous hydrocarbons. The maximum oil production rate of the rock powder sample is 159.8 mg/g TOC, which is lower than that of the kerogen sample. It suggests that certain minerals in the Chang 7 shale may impede hydrocarbon generation. After the addition of pyrite, the highest yield of shale oil is 213.96 mg/g TOC, 33.9% higher than the yield of the original rock powder sample, reflecting the positive catalytic effect of pyrite on hydrocarbon generation of Chang 7 shale. Under geologic conditions, pyrite catalytic hydrocarbon generation may act primarily on the migration of organic matter by macromolecules, which considerably increases the probability of direct contact between pyrite and organic matter. Therefore, the organic‐rich shale with high pyrite content in Chang 7 member is the preferred target for in situ conversion of shale oil and gas in the Ordos Basin.

Variability in n-caprylate and n-caproate producing microbiomes in reactors with in-line product extraction.

Medium-chain carboxylates (MCCs) are used in various industrial applications. These chemicals are typically extracted from palm oil, which is deemed not sustainable. Recent research has focused on microbial chain elongation using reactors to produce MCCs, such as n-caproate (C6) and n-caprylate (C8), from organic substrates such as wastes. Even though the production of n-caproate is relatively well-characterized, bacteria and metabolic pathways that are responsible for n-caprylate production are not. Here, three 5 L reactors with continuous membrane-based liquid-liquid extraction (i.e., pertraction) were fed ethanol and acetate and operated for an operating period of 234 days with different operating conditions. Metagenomic and metaproteomic analyses were employed. n-Caprylate production rates and reactor microbiomes differed between reactors even when operated similarly due to differences in H2 and O2 between the reactors. The complete reverse β-oxidation (RBOX) pathway was present and expressed by several bacterial species in the Clostridia class. Several Oscillibacter spp., including Oscillibacter valericigenes, were positively correlated with n-caprylate production rates, while Clostridium kluyveri was positively correlated with n-caproate production. Pseudoclavibacter caeni, which is a strictly aerobic bacterium, was abundant across all the operating periods, regardless of n-caprylate production rates. This study provides insight into microbiota that are associated with n-caprylate production in open-culture reactors and provides ideas for further work.IMPORTANCEMicrobial chain elongation pathways in open-culture biotechnology systems can be utilized to convert organic waste and industrial side streams into valuable industrial chemicals. Here, we investigated the microbiota and metabolic pathways that produce medium-chain carboxylates (MCCs), including n-caproate (C6) and n-caprylate (C8), in reactors with in-line product extraction. Although the reactors in this study were operated similarly, different microbial communities dominated and were responsible for chain elongation. We found that different microbiota were responsible for n-caproate or n-caprylate production, and this can inform engineers on how to operate the systems better. We also observed which changes in operating conditions steered the production toward and away from n-caprylate, but more work is necessary to ascertain a mechanistic understanding that could be predictive. This study provides pertinent research questions for future work.

Spontaneous molecular bromine production in sea salt aerosols.

Bromine chemistry is responsible for the catalytic ozone destruction in the atmosphere. The heterogeneous reactions of sea-salt aerosols are the main abiotic sources of reactive bromine in the atmosphere. Here, we present a novel mechanism for the activation of bromide ions (Br-) by O2 and H2O in the absence of additional oxidants. The laboratory and theoretical calculation results demonstrated that under dark conditions, Br-, O2 and H3O+ could spontaneously generate Br and HO2 radicals through a proton-electron transfer process at the air‒water interface and in the liquid phase. Our results also showed that light and acidity could significantly promote the activation of Br- and the production of Br2. The estimated gaseous Br2 production rate under light conditions was up to 1.55×1010 molecules·cm-2·s-1 under light and acidic conditions; these results showed a significant contribution to the atmospheric reactive bromine budget. The reactive oxygen species (ROS) generated during Br- activation could promote the multiphase oxidation of SO2 to produce sulfuric acid, while the increase in acidity had a positive feedback effect on Br- activation. Our findings highlight the crucial role of the proton-electron transfer process in Br2 production.

In Situ Growth of Hierarchical Silver Sub‐Nanosheets on Zinc Nanosheets‐Based Hollow Fiber Gas‐Diffusion Electrodes for Electrochemical CO2 Reduction to CO

Electrochemical reduction of CO2 (CO2RR) is an effective strategy to mitigate carbon emission effects and store renewable electricity in value‐added feedstocks, but it still suffers low production rate and current density. A nanostructured catalyst offers opportunities to enhance CO2RR activity by contributing numerous active sites and promoting charge transfer. Herein, a Cu hollow fiber gas diffusion electrode (HFGDE) with silver sub‐nanosheets on a zinc nanosheet structure to produce CO is reported. Compared to the HFGDE only possessed zinc nanosheet structure, the as‐prepared HFGDE with hierarchical sub‐nano AgZn bimetal nanosheets exhibits a twice‐partial current density of CO and a CO production rate at the applied potential −1.3 V (versus reversible hydrogen electrode). The unique Ag sub‐nanosheets interconnected Zn nanosheets provide multiple charge transfer channels, and the synergistic effect between Ag and Zn improves the adsorption binding energy of COOH* intermediate, resulting in a lower charge transfer resistance and fast CO2RR kinetics to produce CO. This research demonstrates the high potential of nanoengineering electrocatalysts for HFGDE to achieve highly efficient CO2 reduction.

Engineering bionanoreactor in bacteria for efficient hydrogen production

Hydrogen production through water splitting is a vital strategy for renewable and sustainable clean energy. In this study, we developed an approach integrating nanomaterial engineering and synthetic biology to establish a bionanoreactor system for efficient hydrogen production. The periplasmic space (20 to 30 nm) of an electroactive bacterium, Shewanella oneidensis MR-1, was engineered to serve as a bionanoreactor to enhance the interaction between electrons and protons, catalyzed by hydrogenases for hydrogen generation. To optimize electron transfer, we used the microbially reduced graphene oxide (rGO) to coat the electrode, which improved the electron transfer from the electrode to the cells. Native MtrCAB protein complex on S. oneidensis and self-assembled iron sulfide (FeS) nanoparticles acted in tandem to facilitate electron transfer from an electrode to the periplasm. To enhance proton transport, S. oneidensis MR-1 was engineered to express Gloeobacter rhodopsin (GR) and the light-harvesting antenna canthaxanthin. This led to efficient proton pumping when exposed to light, resulting in a 35.6% increase in the rate of hydrogen production. The overexpression of native [FeFe]-hydrogenase further improved the hydrogen production rate by 56.8%. The bionanoreactor engineered in S. oneidensis MR-1 achieved a hydrogen yield of 80.4 μmol/mg protein/day with a Faraday efficiency of 80% at a potential of -0.75 V. This periplasmic bionanoreactor combines the strengths of both nanomaterial and biological components, providing an efficient approach for microbial electrosynthesis.

Engineering bionanoreactor in bacteria for efficient hydrogen production

Hydrogen production through water splitting is a vital strategy for renewable and sustainable clean energy. In this study, we developed an approach integrating nanomaterial engineering and synthetic biology to establish a bionanoreactor system for efficient hydrogen production. The periplasmic space (20 to 30 nm) of an electroactive bacterium, Shewanella oneidensis MR-1, was engineered to serve as a bionanoreactor to enhance the interaction between electrons and protons, catalyzed by hydrogenases for hydrogen generation. To optimize electron transfer, we used the microbially reduced graphene oxide (rGO) to coat the electrode, which improved the electron transfer from the electrode to the cells. Native MtrCAB protein complex on S. oneidensis and self-assembled iron sulfide (FeS) nanoparticles acted in tandem to facilitate electron transfer from an electrode to the periplasm. To enhance proton transport, S. oneidensis MR-1 was engineered to express Gloeobacter rhodopsin (GR) and the light-harvesting antenna canthaxanthin. This led to efficient proton pumping when exposed to light, resulting in a 35.6% increase in the rate of hydrogen production. The overexpression of native [FeFe]-hydrogenase further improved the hydrogen production rate by 56.8%. The bionanoreactor engineered in S. oneidensis MR-1 achieved a hydrogen yield of 80.4 μmol/mg protein/day with a Faraday efficiency of 80% at a potential of -0.75 V. This periplasmic bionanoreactor combines the strengths of both nanomaterial and biological components, providing an efficient approach for microbial electrosynthesis.