Plant Productivity Research Articles

The Comparative Effects of Phosphorus-Enriched Organomineral Fertilization on Some Chemical Properties of Calcareous Soils

ABSTRACT Phosphorus is a very important plant nutrient for the development of plants and its production is not unlimited in the world. In addition, excessive use can lead to soil and water pollution. In this respect, phosphorus should be used effectively in plant production, especially in calcareous soils. The aim of this study was to comparatively determine the effects of phosphorus-enriched organomineral fertilization (p-OMF), chemical phosphorus fertilization (CF), and organic fertilization (OF) on some chemical properties of a calcareous soil. The experiment was established in Söke county of Aydın province in the Southwest of Türkiye. In this study, four doses of dairy manure (DM1: 10, DM2: 20, DM3:30, and DM4: 40 t ha−1) in OF, four phosphorus doses (P1: 10, P2: 20, P3:30, and P4: 40 kg P ha−1) in the CF system, and sixteen different doses of OMF formed by the combinations of these two fertilizers were applied excluding control. According to the main research findings, p-OMFs increased the soil organic matter (SOM), salinity, total nitrogen (N), available phosphorus (P), and potassium (K) by 60.1%, 20.9%, 22.1%, 140%, and 17.2%, respectively. They also decreased soil pH by 4%. As a result, it was determined that the most effective organomineral fertilizer combination that maintains soil properties at appropriate levels in calcareous soils is DM3+P2 (30 t ha−1 dairy manure +20 kg P ha−1).

Optimization of Hub-Based Milkrun Supply

Background: Milkrun-based material supply plays an important role in the automotive industry, as it is a material supply concept where high efficiency can be achieved. When implementing milkrun-based material supply, the milkrun supply of the production plant often has to be integrated with an existing warehouse material handling system, which frequently leads to a less efficient solution. Methods: In this paper, the author investigates the impact of a hub-based milkrun supply, where the collection processes in the component’s warehouse and the distribution processes in the assembly plant are connected to a hub, which is responsible for the sequencing of component demands. After a systematic literature review, the paper introduces a novel mathematical model, which makes it possible to describe the conventional milkrun-based solutions, the hub-based milkrun solutions, and to compare them in terms of the length of transportation routes, transportation time, total service time, and virtual emission points of view. Results: The scenario analysis demonstrates that the hub-based solution can lead to an efficiency improvement of about 13% in total service time, 23% savings in transportation time, and 45% savings in transportation time in the component’s warehouse. Conclusions: The article’s findings suggest that implementing a hub-based milkrun system in automotive material supply can significantly enhance efficiency. The described approach could lead to more streamlined operations in production plants by optimizing the integration of milkrun systems.

Implementation of Construction Management Approach for Improving the Productivity of RMC Plants

Our has been traditionally labor oriented. The pace of mechanization in the past has been very slow due to the availability of cheap labor in abundance, lack of capital investment and the highly fragmented nature of the construction industry. The degree of mechanization is still around 25%-30% while it is well above 70% in most of the developed countries The liberalization of Indian economy from 1991 onwards paved the way for large scale investments in infrastructure, industrial, housing and agriculture sectors. The new age constructions required speed and superior quality to obtain profitable life cycle cost of the projects. The emerging scenario helped to increase the pace of mechanization and facilitated the establishment of RMC plants on commercial scale to synchronies with the overall development strategy. RMC in India on commercial scale started in 1993 at Pune with only one plant. It has achieved nearly 15% share of the total concrete produced in the country. In some major cities, like Bangalore, Hyderabad, Mumbai and Chennai the share of RMC has reached as high as 50% to 60%. The growth prospects of RMC in India are enormous, provided requisite support is provided by the regulatory authorities, consumers and decision makers during its formative years. In this project the critical factor causing improving productivity will indentify.

Impact of Silicon Fertilization in Crop Production: Enhancing Yield, Stress and Disease Resistance in Agriculture

Silicon (Si) is a vital macroelement widely present in the environment, playing a crucial role in helping plants recover from environmental stresses. Its primary function is to boost the plant's resistance against biotic and abiotic stress. Furthermore, silicon can enhance soil quality by mitigating the toxicity of heavy metals like iron (Fe), aluminum (Al), and manganese (Mn), while also increasing phosphorus (P) availability. Additionally, it improves plants' tolerance to drought and salinity by promoting the formation of silicified tissues. It is also effective in managing a range of pests and diseases in plants, including those caused by fungi and bacteria. Silicon positively interacts with other applied nutrients, enhancing their effectiveness and improving agronomic performance, particularly in terms of yield. Thus, incorporating silicate-containing fertilizers into agricultural practices is essential for enhancing plant performance and productivity.

Effects of ‘Candidatus’ Liberibacter Asiaticus on the Root System of Poncirus trifoliata Hybrids as a Rootstock for ‘Valencia’ Scion

The symptoms of huanglongbing (HLB), a disease caused by the bacterium Candidatus Liberibacter asiaticus (CLas), are visible on the canopy of citrus plants. They include mottling of leaves followed by dropping and lopsided fruits with premature dropping. Loss in phloem functionality and degradation of the root system are also HLB symptoms with a severe impact on plant growth and production. Some Citrus relatives, such as Poncirus trifoliata and its hybrids, have shown more tolerance to HLB disease and low titers of CLas compared to Citrus species, but little is known about the effects of CLas on their root system. In this study, we investigated the effects of CLas-infected ‘Valencia’ scion on the citrandarin IAC3222 (a hybrid between P. trifoliata and Sunki mandarin) used as rootstock as well as interstock between ‘Valencia’ and Swingle citrumelo rootstock. At 13 months post-inoculation, the cycle threshold values (CT) for CLas in the infected scion samples indicated a high CLas titer (from 15.9 to 22.7) regardless of the rootstock variety or interstock used. However, no CLas-positive samples were detected in the roots of IAC3222 (CT ranging from 37.9 to 40.0), in contrast to all Swingle roots (CT ranging from 27.9 to 31.3). Both root volume and mass were reduced in IAC3222 compared to uninfected ‘Valencia’ scion, suggesting that scion infection damages roots, regardless of whether they are contaminated or not by CLas. The damage to the root system of IAC3222 was significantly less severe than that of the Swingle rootstock. Multivariate hierarchical analysis considering all evaluated parameters clustered the CLas-infected plants grafted on IAC3222 together with the non-inoculated plants. We concluded that the IAC3222 rootstock was less affected by the CLas-infected scion compared to the Swingle rootstock and is a promising rootstock to minimize the HLB effect on plant development.

Evaluation of Cyto-Genotoxic Effects of Mucuna Bracteata DC. Ex Kurz Leaf Extracts by Allium Cepa

This study was conducted to evaluate the cyto-genotoxicity of leaf decoctions of Mucuna bracteata by Allium cepa bioassay. This kind of study can be used as a baseline monitoring system for plant products before their use. It is an inexpensive, simple, and reliable test to determine the cytotoxic and genotoxic effects of various plant extracts on living organisms. In this experiment, Allium cepa bulbs were placed in five concentrations (0.5 mg/mL, 2.5 mg/mL, 5.0 mg/mL, 7.5 mg/mL, and 10.0 mg/mL) of leaf decoction, with tap water as the negative control and 20.0 µL/L EMS (Ethylmethene sulphonate) as the positive control. Each concentration had five replicates. The cyto-genotoxicity assay exhibited a dose-dependent influence on the mitotic index. The mitotic index of the negative control and the positive control were 16.8 ± 0.37% and 6.86 ± 1.71%, respectively. The lowest dose of the extract, 0.5 mg/mL, had the highest mitotic index (14.2 ± 0.73%), while the highest dose, 10.0 mg/mL, had the lowest (9.6 ± 0.40%), and all indices were significantly higher than the positive control. Except for the 10 mg/mL concentration, the mitotic indices of other concentrations were significantly lower than the negative control. Different types of chromosome disorders, namely, disorderly prophase, sticky chromosomes, chromosome bridges, laggard chromosomes, pole deviation, vagrant chromosomes, nuclear filaments with terminal expansion, c-mitosis, micronuclei, and elongated nuclei, were observed. Various changes in root size, growth, and color were revealed by macroscopic examinations. Tumors were formed in roots at the highest doses but not at lower concentrations. Therefore, M. bracteata leaf extract showed cytotoxic and genotoxic effects on the Allium root meristem. J. Bio-Sci. 32(2): 71-82, 2024

Impact of Potassium Fertilization on Growth and Yield of Small Millets

Aims: To evaluate the impact of varying potassium application levels on the growth and yield of small millets and to assess the economic viability of potassium fertilization in small millet farming. Methodology: A split plot design experiment was carried out, featuring four crops as the main treatments: C1 - Proso millet, C2 - Barnyard millet, C3 - Kodo millet, and C4 - Browntop millet. Potassium fertilizer was applied at four different rates (0, 10, 20, and 30 kg/ha) as sub-treatments. Throughout the cropping period, various morpho-physiological traits were monitored, including plant height (cm), tiller count per plant, and yield-related metrics such as the number of panicles per plant, 1000-grain weight (g), and biomass production per plant (g). At harvest, yield data and yield attributes were recorded, followed by an economic analysis. Results: The results indicated that, Proso millet showed a plant height increase from 75.85 to 94.37 cm, number of productive tillers (4.73) with high potassium doses, while Barnyard millet reached a maximum height of 119.13 cm, grain yield significantly increased from 1547 kg/ha without potassium to 2055 kg/ha with the highest potassium dose. Barnyard millet (achieving the highest gross return of Rs 61650/ha and a B: C ratio of 2.20 with the highest potassium dose. Conclusion: Application of potassium 20 kg/ha, along with the recommended dose of nitrogen and phosphorus, recorded 31.8% higher yield, greater tolerance to lodging, reduced pest and disease incidence and remunerative economics in millet cultivation.

A Study to Estimate the effect of Water Scarcity On the Morphological and Biochemical Parameter of the Plant

The importance of doing research on the effects of water scarcity on plant health and productivity cannot be overstated, particularly in light of the effects of climate change and the rising urgency of water scarcity. Calculating the ways in which water scarcity influences the morphological and biochemical features of plants is the objective of this research. Protein concentrations, antioxidant activity, and chlorophyll content are examples of biochemical parameters, while plant height, leaf area, and root length are examples of morphological criteria. Furthermore, the length of the roots is an example of a root. We were able to see significant changes in the morphological and biochemical properties of the plants by conducting experiments that were carefully controlled and administered with varying degrees of water availability. Water scarcity is a direct factor that affects plant growth, as seen by reduced plant height, reduced leaf area, and shorter root length. In terms of biochemistry, we saw a decrease in the contents of chlorophyll and protein, both of which are essential for the process of photosynthesis and for the overall health of plants. On the other side, antioxidant activity increased, which is indicative of a stress response mechanism that is being used to cope with the lack of water. The findings highlight the critical need of implementing sustainable water management methods in order to achieve the goal of preserving the resilience of plants and the productivity of agricultural production in the face of water scarcity. This research provides valuable insights into the physiological changes that plants go through when they are subjected to water stress. These findings have the potential to open up new routes for the creation of plant varieties that are resistant to drought.

Content and Distribution of Radionuclides in the Profile of Light Gray Forest Soil and Agrocenosis Plants

The results of long-term radiation monitoring of light gray forest soil and cultivated plants of the reference area are presented. Correlation analysis has determined the relationship between the distribution of artificial and natural radionuclides in the soil profile with its agrochemical properties. The distribution of radionuclides in the soil profile is determined by the intensity of the podzolic process. The profile shows the eluvial-illuvial differentiation of radionuclides, when an increase in their accumulation occurred in the illuvial horizon. According to the density of contamination of the surface soil layer with cesium-137 and strontium-90, a satisfactory level of the environmental situation was determined, according to which the soil of the site is classified as uncontaminated. Rows of cultivated plants with an increasing ability to accumulate caesium-137 and strontium-90 from the soil have been constructed. The grain of all grain crops accumulated less cesium-137 and strontium-90 compared to straw. All grown plant products of all types of crops fully met veterinary and hygienic standards for the content of caesium-137 and strontium-90 in feed (green mass, straw and feed grain) and food grains. The coefficients of accumulation and transfer of caesium-137 and strontium-90 from soil to plants were calculated.

Innovation in Cassava Bagasse Valorization: Efficiency of Convective Drying Enhanced with Ultrasound and Pulsed Electric Fields

This research proposes an efficient alternative for dehydrating cassava bagasse to address the inherent challenges in the handling, transportation, storage, and preservation of this agro–industrial residue generated in cassava starch production plants. This residue is characterized by high moisture retention, considerable volume, and hydrophilic nature, complicating conventional drying methods. This study evaluates the impact of emerging ultrasound (US) and pulsed electric field (PEF) technologies prior to convective drying to enhance the dehydration efficiency of cassava bagasse, aiming at its valorization and contributing to the sustainability of the cassava starch industry. The findings reveal that pretreatment with ultrasound (US) and pulsed electric fields (PEF) significantly reduces the drying time of cassava bagasse compared to convective drying alone. With probe ultrasound at 26 kHz for 30 min, the drying time is reduced by 72% (3.83 h vs. 14.0 h); with bath ultrasound at 37 kHz for 30 min, it is reduced by 56.0% (6.16 h vs. 14.0 h); and with PEF at 7.5 kV/cm for 30 min, it is reduced by 52.4% (6.66 h vs. 14.0 h). These emerging technologies increased the effective diffusivity and modified the molecular structure of the bagasse, thereby improving mass transfer and drying process efficiency. These results are particularly useful for developing more efficient and sustainable strategies for drying agricultural by-products, with direct implications for the post-industrial treatment of agro–industrial residues with high water content.

Invasive plant species support each other's growth in low-nutrient conditions but compete when nutrients are abundant.

Globally, numerous ecosystems have been co-invaded by multiple exotic plant species that can have competitive or facilitative interactions with each other and with native plants. Invaded ecosystems often exhibit spatial heterogeneity in soil moisture and nutrient levels, with some habitats having more nutrient-rich and moist soils than others. The stress-gradient hypothesis predicts that plants are likely to engage in facilitative interactions when growing in stressful environments, such as nutrient-deficient or water-deficient soils. In contrast, when resources are abundant, competitive interactions between plants should prevail. The invasional meltdown hypothesis proposes that facilitative interactions between invasive species can enhance their establishment and amplify their ecological impact. Considering both hypotheses can offer insights into the complex interactions among invasive and native plants across environmental gradients. However, experimental tests of the effects of soil moisture and nutrient co-limitation on interactions between invasive and native plants at both interspecific and intraspecific levels in light of these hypotheses are lacking. We performed a greenhouse pot experiment in which we cultivated individual focal plants from five congeneric pairs of invasive and native species. Each focal plant was subjected to one of three levels of plant-plant interactions: (1) intraspecific, in which the focal plant was grown with another individual of the same species; (2) interspecific, involving a native and an invasive plant; and (3) interspecific, involving two native or invasive individuals. These plant-plant interaction treatments were fully crossed with two levels of water availability (drought vs. well-watered) and two levels of nutrient supply (low vs. high). Consistent with the stress-gradient and invasional meltdown hypotheses, our findings show that under low-nutrient conditions, the biomass production of invasive focal plants was facilitated by invasive interspecific neighbors. However, under high-nutrient conditions, the biomass production of invasive focal plants was suppressed by invasive interspecific neighbors. When competing with native interspecific neighbors, high-nutrient conditions similarly enhanced the biomass production of both invasive and native focal plants. Invasive and native focal plants were neither competitively suppressed nor facilitated by conspecific neighbors. Taken together, these results suggest that co-occurring invasive exotic plant species may facilitate each other in low-nutrient habitats but compete in high-nutrient habitats.

Optimization of soil hydrological properties in degraded grasslands by soil amendments

Soil amendments facilitate the restoration of degraded soil fertility and vegetation productivity. Soil hydrological functions are crucial for assessing soil degradation and restoration in grassland ecosystems. However, the manner in which soil amendments drive changes in the hydrological properties of grassland ecosystems at different soil depths remains unclear. In this study, we conducted a five-year soil amendment experiment in a semi-arid grassland of the Loess Plateau to evaluate the impact of aluminum sulfate (AS) and biochar (BC), both individually and in combination, on the hydrological properties of soil profiles. The results showed that AS significantly increased saturated water-holding capacity (SWHC) by 19.04 %, field capacity (FC) by 27.39 %, soil water storage (SWS) by 1.57 %, and saturated hydraulic conductivity (Ks) by 19.03 % in the upper soil layer (0–40 cm). BC application increased SWHC by 20.09 %, FC by 17.56 %, SWS by 12.94 %, and Ks by 16.66 % in the 0–40 cm soil layers. The combined effects of AS and BC optimized the soil hydrological properties by increasing SWHC, FC, SWS, and Ks by 25.74 %, 35.45 %, 18.47 %, and 25.80 %, respectively. These improvements were driven by significant changes in the soil organic matter, fine root biomass, total porosity, clay content, and soil bulk density. Notably, the soil amendments did not significantly affect the hydrological properties of the deep soil layer (40–80 cm). Our study demonstrated that the strategic use of AS and BC, particularly in combination, effectively enhanced soil fertility and hydrological functions, thereby increasing grassland ecosystem productivity. These findings offer critical insights for sustainable grassland management and highlight the potential of tailored soil amendments to restore and improve soil fertility and plant productivity in degraded grassland ecosystems.

Optimization framework of clean heat and CO2 supply for agricultural greenhouses exploiting industrial symbiosis

The rising demand for greenhouse cultivation poses a challenge in providing environmentally friendly energy to maintain favorable greenhouse indoor conditions. This research presents an optimization model to identify cost-optimal symbiotic pathways to replace the import of three key greenhouse crops (tomato, cucumber, lettuce) with local greenhouse production. The proposed solutions involve greenhouses that can meet these crops' heat and CO2 demands via industrial symbiosis. Switzerland is investigated as the case study, and the (waste) heat suppliers are municipal solid waste incinerators, cement production plants and biogas plants. Upgrading biomethane production plants are also considered potential CO2 suppliers. The objective is to minimize the discounted cost when replacing 25%–100 % of vegetable imports with local agricultural greenhouses, considering availability of suitable land as well as waste heat and CO2 suppliers. Optimization results suggest prioritizing northeast and west Switzerland for greenhouse development, due to the availability of suitable land and proximity of waste heat and CO2 suppliers. Waste incinerators could provide 50%–70 % of the necessary heat, while Organic Rankine cycle in cement plants could generate 63 % of the electricity of supplementary lighting demand of greenhouses. While tailored for Switzerland, the optimization framework's general formulation can be adapted also to other regions to optimize greenhouses' heat and CO2 demands. The optimization code is provided open source for associated applications.

The Effect of Mycorrhiza and Plant Growth-Promoting Rhizobacteria Supplementation on Zea mays saccharata Sturt. Growth and Productivity Grown on Low Nutrients Soil

Marginal land has low nutrient content (nitrogen, phosphorus, potassium). Addressing nutrient deficiencies on marginal land requires a strategic approach. Biological fertilizers like Arbuscular Mycorrhizal Fungi (AMF) and plant growth-promoting rhizobacteria (PGPR) enhance nutrient availability through symbiotic interactions. In addition, organic fertilizers such as compost could provide organic matter and improve soil structure to increase plant growth and productivity. Combining these three fertilizers with the addition of low doses of NPK fertilizer can increase the growth and productivity of maize crops on sub-marginal land. This study aims to determine the effect of AMF, consortium of PGPR, and a low dose of NPK on the growth and productivity of maize and soil nutrients on sub-marginal land by measuring plant growth up to 8 WAP (week after planting) (parameters: plant height, stem diameter, number of leaves, leaf area, chlorophyll content, stomatal density) and productivity (parameters: cob length, cob weight with husk, fresh weight, dry weight) and levels of N, P, and K elements at 8 WAP in the soil after planting. All treatments showed an increase in the level of N and K elements, while the P element showed a decrease compared to the control (soil without treatment). Moreover, each parameter did not show a significant difference, but the P2 (Compost + PGPR consortium + AMF + 50% of NPK) treatment showed the best growth and productivity. Overall, the data showed the utilization of PGPR and AMF combination was able to reduce the usage of chemical fertilizer by 50%.

Impact of Basal Phosphorus Application and Foliar Molybdenum Spray on the Agronomic Performance of DVN11 Soybean

This study investigates the impact of basal phosphorus (P2O5) application combined with foliar molybdenum (Mo) spraying on the growth, development, and yield of the DVN11 soybean variety. A field experiment was conducted using a randomized complete block design with different treatment combinations of P2O5 and Mo. The parameters measured included plant height, number of leaves, pod formation, biomass accumulation, and final yield. The results demonstrated that the combined application of P2O5 and foliar Mo significantly enhanced plant height and leaf number compared to the control. Pod formation and biomass accumulation were also positively influenced by the treatments, indicating improved overall plant health and productivity. The highest yield was observed in the treatment with the optimal combination of basal P2O5 and foliar Mo, highlighting the synergistic effect of these nutrients. Our findings suggest that the integration of basal phosphorus application with foliar molybdenum spraying can be an effective agronomic practice to boost the growth and yield of DVN11 soybean. This study provides valuable insights for soybean cultivation and nutrient management, promoting sustainable agricultural practices.

The Effects of Bio-Fertilizer by Arbuscular Mycorrhizal Fungi and Phosphate Solubilizing Bacteria on the Growth and Productivity of Barley under Deficit of Water Irrigation Conditions

Bio-fertilizers are the most important and effective method used to reduce the quantities of chemical fertilizers consumed and reduce dependence on them in agricultural production to avoid their harmful effects on the environment and public health as well as reduce the cost of agricultural production in light of increasing pollution and under adverse conditions for production and climate change. A bio-fertilizer depends primarily on the use of beneficial microorganisms such as arbuscular mycorrhizal fungi (AMF) to improve the uptake of nutrients, improve plant growth, productivity, and grain yield. Crop production faces many challenges, and drought is one of the majority of the significant factors limiting crop production worldwide, especially in semi-arid regions. The objective of this study was to evaluate the effects of AMF and phosphate solubilizing bacteria (PSB), plus three rates of the recommended dose of phosphorus (RDP) fertilizer on yield, yield components, and nutrients uptake, in addition to evaluating the beneficial effects of these combinations to develop Phosphorus (P) management under three levels of irrigation water, i.e., three irrigations (normal or well-watered), two irrigations (moderate drought), and one irrigation (severe drought) on barley (Hordeum vulgare L.). The results showed that the treatment with AMF bio-fertilizer yielded the highest values of plant height, spike length, spike weight, number of grains/spike, 1000-grain weight, grain yield, straw yield, biological yield, and harvest index. Moreover, the grain and straw uptake of nitrogen (N), P, and potassium (K) (kg ha−1) in the two seasons under the three levels of irrigation, respectively, were superior followed by the inoculation by PSB. While the treatment without bio-fertilizer yielded the lowest values of these traits of barley, the treatment with bio-fertilizer yielded the increased percentage of the grain yield by 17.27%, 17.33% with applying AMF, and 10.31%, 10.40% with treatment by PSB. Treatment with AMF or PSB (Phosphorien), plus rates of phosphorus fertilizer under conditions of irrigation water shortage, whether irrigation was performed once or twice, led to an increase in grain yield and other characteristics compared to the same fertilization rates without inoculation. The results of this study showed that the use of bio-fertilizers led to an increase in plant tolerance to drought stress, and this was demonstrated by an increase in various traits with the use of treatments that include bio-fertilizers. Therefore, it is suggested to inoculate the seeds with AMF or PSB plus adding phosphate fertilizers at the recommended dose under drought conditions.

Biochar Amendment and its Impacts on Medicinal and Aromatic Plants in Sustainable Agriculture

Introduction: Biochar application and research have experienced a significant increase in recent decades. It can produce different kinds of organic materials, and it can be employed for different purposes, such as soil conditioning, carbon sequestration and filtration of pollutants from gas and aqueous media. Biochar is a C-rich material, which can be obtained from different types of organic feedstock, such as animal manure, sewage sludge, wood and crop residues and other organic waste. It is also considered an environmentally friendly and resource-saving approach in medicinal and aromatic plants production. Biochar can lead to plant growth improvement and influence on chemical components of medicinal plants, stimulate the growth of soil microflora, increase soil carbonsequestration, bioremediation of soil, regulate carbon fluxes between atmosphere and biosphere, reduce biotic stress in plants, improve soil nutrient availability, decrease abiotic stress in plants, wastewater treatment, immobilization and sorption of soil heavy metal contaminants. Methods: Relevant literature has been obtained using the keywords “biochar”, “organic amendment”, “soil quality”, “medicinal Plants”, “natural products”, “soil quality”, “macronutrient”, and “chemical components” in scientific databases, such as “PubMed”, “SciFinder”, “Elsevier”, and “Web of Science”. Results: The aim of this literature review is to study the impact of different kinds of biochars on medicinal and aromatic plants, soil quality and soil fertility by considering case studies of successful paradigms. Conclusion: Conclusively, we consider our review article will provide an appropriate guide for practitioners and researchers for future studies as well as large-scale field applications.

Chemical plant optimization layout based on the domino hazard index considering the fixed hazard unit outside the available area

The layout of chemical plants is a significant step to promote the safe and efficient operation of a chemical factory. In the actual production process, the chemical process plant layout may be affected by immovable hazards outside the available layout area. In this paper, the external hazard unit is arranged as one of the chemical process plants. The domino effect potential of all chemical process plants is quantified by using the classical domino hazard index (DHI). A layout optimization model considering the effects of external hazard units has been proposed to obtain the optimal plant layout from economic and safety aspects. The feasible layout solutions are obtained under the orientation, boundary and non-overlapping constraints by the non-dominated sorting genetic algorithm II (NSGA-Ⅱ). The proposed model is further analyzed through a hypothetical case of three storage tanks outside the acrylic acid (AA) production plant layout area. The results show that the total cost range for the optimal solution is 650348 to 1365443 $, with corresponding DHI values ranging from 29 to 129. The plant with larger DHI value will be arranged to far away from the external hazard units to obtain a safer layout. This work can provide rational layout solutions for the layout designers to make different decisions according to the actual situation.

Social Life Cycle Assessment of green hydrogen production: evaluating a projected Portuguese industrial production plant

The increase in industrial production and energy consumption has led to excessive exploitation of non-renewable resources, resulting in serious environmental problems such as greenhouse gas emissions. In response, there's a growing investment in renewable energies such as hydroelectric, wind, and solar power. However, these sources are unable to fully meet demand, leading to imbalances between consumption and production. An emerging solution to this challenge is green hydrogen, produced from clean sources, reducing dependence on fossil fuels and mitigating greenhouse gas emissions. The S-LCA methodology presented in the UNEP/SETAC Guidelines for the Social Life Cycle Assessment of is applied to the production of green hydrogen via the electrolytic separation of water using a proton exchange electrolyser. The process involves the extraction and processing of raw materials from the electrolyser, BOP and reverse osmosis system, the manufacture of the systems and the production of green hydrogen. The data from each stage is inventoried and entered into the PSILCA v.3.1 and SHDB 2022FV5 databases, integrated into the SimaPro software version 9.3.0.2, enabling a complete analysis of the social impacts associated with the production of green hydrogen. The data was evaluated considering 3 stakeholder categories: workers, value chain actors, society and local community. The results indicate that the extraction and processing of raw materials for the electrolyser was the primary stage responsible for the social impacts in both databases. However, the electrolyser manufacturing stage was the main contributor to the indicators "weekly working hours per employee" and "union density" in the PSILCA database. Nafion® and Iridium were identified as the major contributors among components in both databases. The study highlights the significant role played by countries like China and South Africa in social impacts, particularly in the extraction and processing of raw materials. Despite this, Portugal emerged as the largest contributor to five out of fourteen indicators in the PSILCA database, while its contributions in the SHDB database were less than 7%. Moreover, a comparison between the two databases revealed that PSILCA exhibited a greater distribution of results across various stages, components, and countries assessed, whereas SHDB showed more centralized results. The observed discrepancies between the results obtained from different databases can be attributed to three main factors: the input-output database utilized in each S-LCA tool, the assumed risk levels for each indicator, and the equivalence between indicators and subcategories. This exploratory study offers valuable insights for guiding strategic decisions regarding the social component of sustainability, providing a detailed understanding of the social impacts associated with the specific case of green hydrogen production in a planned hub in Portugal.

A Comprehensive Review on : Aquaponic Farming Water Quality Prediction

Aquaponic farming, which combines aquaculture and hydroponics, depends strongly on maintaining optimal water quality to guarantee the health and productivity of both fish and plants. This review paper explores the latest developments in IoT-based automated water monitoring systems, focusing on their role in predicting and managing water quality in aquaponic systems. Regardless of significant progress there are several research gaps. Recent studies highlight challenges such as inconsistent sensor selection, calibration issues, insufficient publicly available data, and inadequate data cleaning and preprocessing. Also, the issues of imbalanced datasets, limited long-term data, and underdeveloped IoT and AI integration prevent the development of accurate predictive models. The scalability and maintenance of systems, understanding microbial dynamics, and nutrient management are also critical areas needing further exploration. This review also identifies the need for deeper case studies and advanced feature extraction methods to enhance prediction accuracy. By addressing these gaps, including system scalability and nutrient management, future research can improve data availability and quality, enabling more robust predictions and contributing to more efficient and sustainable aquaponic systems.