Low-temperature Production Research Articles

1-Dimensional metal Nitride-Supported platinum nanoclusters for Low-Temperature hydrogen production from formic acid

Formic acid is widely recognized as a suitable liquid hydrogen carrier for linking renewable energies toward various economic sectors. Designing efficient and stable heterogeneous catalysts for low-temperature hydrogen generation from formic acid is vital for this topic. In this study, a rational hierarchical architecture is explored by assembling Pt nanoclusters with 1-dimensional (1D) GaN nanowires. The catalytic architecture describes a considerable hydrogen production activity of 54.89 mmol·gcat−1·h−1 with a nearly 100 % selectivity and a turnover frequency (TOFPt) of 505.7 h−1 under near ambient conditions, enabling the achievement of a high turnover number of 306,981 mol H2 per mole Pt over 200 h of long-term operation. Through comprehensive mechanistic studies, it is unraveled that the synergistic effect between Pt nanoclusters and GaN significantly reduces the energy barrier for the formation of the key HCOO* intermediate from formic acid dehydrogenation whereas significantly increases the energy barrier of HCOOH → HCO* + *OH. It thus simultaneously contributes to improving the activity and selectivity of formic acid decomposition toward H2. This study proposes a promising strategy for hydrogen generation from formic acid at low temperatures, which is critical for achieving carbon neutrality by coordinating industrial waste heat with renewable energies via liquid hydrogen carriers.

Low-Temperature Reforming Products coupling Spark Plug on Gasoline Compression Ignition and Combustion Characteristics under Low-Load Condition

Low-Temperature Reforming Products coupling Spark Plug on Gasoline Compression Ignition and Combustion Characteristics under Low-Load Condition

Research and Practice of Sand Control Completion Technology Optimization in Western H Oilfield

Abstract In view of the problems of poor reservoir physical properties, high clay content, loose cementation, shallow burial, low compaction degree, low temperature in the middle and deep oil layers during the development process of unconsolidated sandstone reservoirs in the western H oilfield, the original sand control technology has poor adaptability and short sand control validity period., this paper carried out research on the optimization of sand control completion technology. In the study, a series of optimization studies were conducted, including analysis of acoustic time difference in sand producing layers, simulation of sand control formation compaction, optimization of gravel filling particle size, and sand control tools. A high-strength artificial wellbore and cyclic gravel filling sand control completion process suitable for different sand producing well conditions were developed and applied in practice. The research results and on-site practice indicate that the high-strength artificial wellbore sand control completion technology has good adaptability in low-temperature and long wellbore sand production wells; The cyclic gravel filling sand control completion technology has the advantages of simple construction, low cost, and low probability of major repairs in conventional shallow sand producing wells; The complementary advantages of the two processes effectively solve the problem of sand damage in H oilfield. Since 2021, the optimized sand control completion technology has been applied 46 times in H oilfield, with an average recovery oil production of 3.4t per well and an average effective period of over 500 days for sand control. The overall input-output ratio is 1:2.8, achieving good benefits and having high promotion and application value.

Wafer-Scale Atomic Layer-Deposited TeOx/Te Heterostructure P-Type Thin-Film Transistors.

There is an increasing demand for p-type semiconductors with scalable growth, excellent device performance, and back-end-of-line (BEOL) compatibility. Recently, tellurium (Te) has emerged as a promising candidate due to its appealing electrical properties and potential low-temperature production. So far, nearly all of the scalable production and integration of Te with complementary metal oxide semiconductor (CMOS) technology have been based on physical vapor deposition. Here we demonstrate wafer-scale atomic layer-deposited (ALD) TeOx/Te heterostructure thin-film transistors with high uniformity and integration compatibility. The wafer-scale uniformity of the film is evidenced by spatial Raman mappings and statistical electrical analysis. Furthermore, surface accumulation-induced good ohmic contact has been observed and explained by the unique band alignment of the charge neutrality level inside the Te valence band. These results demonstrate ALD TeOx/Te as a promising p-type semiconductor for monolithic three-dimensional integration in BEOL CMOS applications incorporated with well-established n-type ALD oxide semiconductors.

Atomically dispersed Zn sites on N-doped carbon boosted transesterification of symmetrical organic carbonates with biomass-derived alcohols

Transesterification of symmetrical organic carbonates with alcohols to access the unsymmetrical ones is a highly attractive strategy for upgrading biomass-derived alcohols. Robust, facile-prepared, and cost-effective catalytic materials remain highly desirable for this route. Herein, we designed several Zn-based catalysts (denoted as Zn@C-T, where T represented the pyrolysis temperature) by the pyrolysis of Zn-based coordination polymer at different temperatures. Very interestingly, the prepared Zn@C-900 could efficiently catalyze the transesterification of diethyl carbonate (DEC) with various biomass-derived alcohols to synthesize the corresponding unsymmetrical organic carbonates with high yields (>95 %), resulting from the atomically dispersed ZnNx sites on the N-doped carbon. Notably, good catalytic activity could be obtained at a low temperature of 80 °C, representing the major breakthrough. Detailed investigations indicated that the excellent performance of Zn@C-900 originated mainly from the synergistic effect of Zn (to activate DEC) and N (to activate the alcohols) in the ZnNx sites. This work provided a promising efficient catalyst for low-temperature production of unsymmetrical organic carbonates via transesterification of DEC.

Size-modulated Pt nanoparticles for low-temperature plasmon-enhanced hydrogen production from aqueous phase reforming of methanol

Al2O3 supported Pt nanoparticles photocatalyst enables efficient hydrogen production (115.2 μmol min−1 gcat−1) through aqueous phase reforming of methanol (APRM) reaction under light irradiation at low temperatures of 150 °C, which is 6 times higher than that of APRM reaction conducted in the dark. We demonstrate that the particle size of Pt nanoparticles greatly affected the light absorption ability, which is of great importance for light utilization of the photocatalyst. The medium particle size of Pt nanoparticles enables the lower electron density states, which is benefit for the dehydrogenation of methanol and the sequential water–gas shift (WGS) reaction and eventually promoted the photocatalytic performance for hydrogen production.

Scale-Up, Continuous and Low-Temperature Production of Multimetal Based Electrocatalysts toward Water Electrolysis.

Electrocatalytic water splitting is a crucial strategy for advancing hydrogen energy and addressing the global energy crisis. Despite its significance, the need for a straightforward and swift method to synthesize electrocatalysts with exceptional performance remains pressing. In this study, we demonstrate a novel approach for the preparation of multimetal-based electrocatalysts in a continuous flow reactor, enabling the quick synthesis of a large number of products through a streamlined process. The resultant NiFe-LDH comprises nanoflakes with a high specific surface area and requires only 255.4 mV overpotential to achieve a current density of 10 mA·cm-2 in 1 M KOH, surpassing samples fabricated by conventional hydrothermal methods. Our method can also be applied to craft a spectrum of other multimetal-based electrocatalysts, including CoFe-LDH, CoAl-LDH, NiMn-LDH, and NiCoFe-LDH. Additionally, the NiFe-LDH electrocatalyst is further applied to anodic methanol electrooxidation coupled with cathodic hydrogen evolution. Moreover, the simplicity and generality of our fabrication method render it applicable for the facile preparation of various multimetal-based electrocatalysts, offering a scalable solution to the quest for high-performance catalysts in advancing sustainable energy technologies.

Optimizing power output in direct formic acid fuel cells using palladium film mediation: experimental and DFT studies

Low-temperature hydrogen production from environmentally friendly liquid fuels such as methanol, ethanol, and formic acid for miniature fuel cells used in powering portable electronic devices is attracting reasonable attention. In this study, we present the findings from the decomposition of formic acid and subsequent power generation within a microfluid fuel cell. The fuel cell system was engineered to incorporate a palladium membrane at the anode and a modified carbon Torray paper at the cathode. To assess fuel cell performance, we employed chronopotentiometry and cyclic voltammetric electro­chemical techniques. This simple fuel cell could achieve a current peak of 3.17 µW by utilizing 2.50 M HCOOH solution and 2.26 µW with 0.1 M solution, all at room temperature. Finally, to provide a deeper understanding of the reactivity and HCOOH decomposition pathways on various palladium surfaces, we conducted density functional theory (DFT) studies. Our DFT investigations revealed that the Pd(111) surface exhibited more negative adsorption energy compared to other surfaces, suggesting its propensity for a more isomeric crystal morphology. This research underscores the promising potential of low-temperature hydrogen production using safe liquid fuels in microfuel cell applications for portable electronic devices.

Architecture of bimodal porous CuO/Al2O3-controlled continuous and low-temperature production of biomass-derived γ-butyrolactone

Biomedical activities of gamma butyrolactone (GBL) play an important role in the development of novel physiological and therapeutic agents. Maleic anhydride catalytic liquid phase hydrogenation allows for selective synthesis of GBL. However, this process is hampered by high cost noble metals and high reaction pressure conditions. Here, we demonstrate cyclic dehydrogenation of biomass-derived 1,4-butanediol (1,4-BDO) under atmospheric pressure and low-temperature conditions using highly dispersed and chemically stabilized Cu species on bimodal porous Al2O3. The bimodal porous Al2O3 exhibited both Lewis and Brønsted acidic properties along with high specific surface area and large pore volume. Among prepared catalysts, 15 wt% Cu/Al2O3 catalyst has shown an optimal crystallite size, bimodal porous nature, and high diffusion properties. Hence, high catalytic activity and remarkable GBL yields with very high 1,4-BDO conversion for 50 h of continuous time-on-stream. The unique bimodal textural properties help to enhance the dehydrogenation activity with a high turnover frequency (TOF) of about 5.0118 x 10-3 s-1via efficient chemical interaction between metallic Cu and 1,4-BDO molecules.

Optimizing a hybrid solid oxide fuel cell-gas turbine and geothermal energy system for enhanced efficiency and economic performance in power and hydrogen production scenario

Geothermal energy is utilized due to its sustainability and ability to provide a continuous low-emission source of heat, making it an ideal complement to the high-efficiency requirements of modern power plants. This study investigates a novel configuration coupling a solid oxide fuel cell-gas turbine unit with a dual-flash binary geothermal structure, enhanced by low-temperature electricity generation and hydrogen production subsystems. This configuration incorporates a regenerative steam Rankine cycle and a proton exchange membrane electrolyzer to achieve an efficient overall design. The setup is evaluated from thermodynamic and economic perspectives using a non-dominated sorting genetic algorithm-II for optimization. A complete parametric study assesses the sensitivity of critical variables. Multi-objective optimization is conducted across three scenarios considering exergy efficiency, hydrogen production rate, sum unit cost of products, and the payback period as objective functions. Results indicate an optimal exergy efficiency of 56.95% and a hydrogen production rate of 0.22 kg/h, with a product unit cost of $7.06/GJ and a payback period of 1.12 years. The parametric study underscores the significant impact of the number of solid oxide fuel cells and their existing density on key variables of the presented configuration. This study highlights the system's potential for efficient and economically feasible power and hydrogen production.

Characterization of light components in rubber-oil mixtures reclaimed asphalt and their effect on the self-healing performance of asphalt

The aging process of asphalt pavement results in the loss of light components (saturates and aromatics) in asphalt, necessitating the use of regenerators for restoration. The study examined the variation pattern of light components in reclaimed asphalt and their effect on the self-healing performance of asphalt after regeneration. Two types of aged asphalt were analyzed using low-temperature co-pyrolysis products of waste tire crumb rubber (WTCR) and waste cooking oil (WCO). The reclaimed asphalt was fractionated into light components using the SARA (saturates, aromatics, resins, and asphaltenes) method. The regenerator containing the highest concentration of light components was identified through the Soxhlet extraction test. The compound compositions and functional groups of the light components in reclaimed asphalt were characterized using gas chromatography-mass spectrometry (GC-MS) and Fourier transform infrared spectroscopy (FTIR). Moreover, the self-healing performance of the reclaimed asphalt was evaluated using a dynamic shear rheometer (DSR). The results indicate that the 260-1-WROM regenerator produced an optimal content of light components under pyrolysis conditions at 260 °C for 1 h. Incorporating the 260-1-WROM regenerator in RTFO resulted in an increase in hopanoids, oxygenates, heterocyclics, and aromas. Similarly, the PAV regeneration process exhibited elevated levels of paraffins, hopanoids, oxygenates, alkanes, heterocyclics, and aromatic compounds. However, the presence of 260-1-WROM failed to increase the contents of steroids. Both types of reclaimed asphalts exhibited superior self-healing capabilities compared to 70#A, RTFO, and PAV. This suggests that 260-1-WROM effectively restored the light components in the aged asphalt, thereby optimizing the flowability of the reclaimed asphalt and enhancing its self-healing properties. Given the above findings, the recommended dosage for 260-1-WROM is 8 % for RTFO and 10 % for PAV.

Membrane Damage and Metabolic Disruption as the Mechanisms of Linalool against Pseudomonas fragi: An Amino Acid Metabolomics Study.

Pseudomonas fragi (P. fragi) is usually detected in low-temperature meat products, and seriously threatens food safety and human health. Therefore, the study investigated the antibacterial mechanism of linalool against P. fragi from membrane damage and metabolic disruption. Results from field-emission transmission electron microscopy (FETEM) and atomic force microscopy (AFM) showed that linalool damage membrane integrity increases surface shrinkage and roughness. According to Fourier transform infrared (FTIR) spectra results, the components in the membrane underwent significant changes, including nucleic acid leakage, carbohydrate production, protein denaturation and modification, and fatty acid content reduction. The data obtained from amino acid metabolomics indicated that linalool caused excessive synthesis and metabolism of specific amino acids, particularly tryptophan metabolism and arginine biosynthesis. The reduced activities of glucose 6-phosphate dehydrogenase (G6PDH), malate dehydrogenase (MDH), and phosphofructokinase (PFK) suggested that linalool impair the respiratory chain and energy metabolism. Meanwhile, genes encoding the above enzymes were differentially expressed, with pfkB overexpression and zwf and mqo downregulation. Furthermore, molecular docking revealed that linalool can interact with the amino acid residues of G6DPH, MDH and PFK through hydrogen bonds. Therefore, it is hypothesized that the mechanism of linalool against P. fragi may involve cell membrane damage (structure and morphology), disturbance of energy metabolism (TCA cycle, EMP and HMP pathway) and amino acid metabolism (cysteine, glutamic acid and citrulline). These findings contribute to the development of linalool as a promising antibacterial agent in response to the food security challenge.

Research on the Low-Temperature Oxygen Consumption and Low-Oxygen Gas Emission Law in Goaf of Ultrathick Coal Seams.

Low-oxygen (oxygen concentration below 18.5%) phenomena often occur in the top coal caving working face of ultrathick coal seams, posing a serious threat to the safety of workers. The characteristics of oxygen consumption and gas production at low-constant temperature and the corresponding functional group evolution of residual coal in goaf were studied by temperature-programmed and infrared spectrum experiments. The influence of different factors on the emission of low-oxygen gases was studied through numerical calculation. The results show that low-temperature oxygen consumption and gas production occurred when the coal was about 40 °C. When the temperature was constant, the oxygen consumption and gas production rate increased with the extension of time. In the early stage of coal oxidation, the aliphatic C-H components were attacked by oxygen molecules and reacted with them. The asymmetric methyl and methylene groups were more likely to oxidize and produce carbonyl compounds. With the increase of nitrogen injection, the overall width of the oxidation zone (oxygen concentration was defined as 10-18%) narrowed, and the range of the oxidation zone moved forward from the depth of the goaf. The oxygen concentration in the air return corner decreased gradually, and the low-oxygen area in the air return corner expanded gradually. The distance between the low-oxygen area of the working face and the air intake corner was gradually shortened. With the increase of air intake, the width of the oxidation zone increased and moved to the depth of goaf, and the degree of low oxygen in the air return corner increased. The research results are of great significance for the understanding and prevention of the low-oxygen phenomenon in ultrathick coal seams.

Microstructure Evolution and Electrical Behaviors for High-Performance Cu2O/Zr-Doped β-Ga2O3 Heterojunction Diodes.

Beta-gallium oxide (β-Ga2O3) is emerging as a promising ultrawide band gap (UWBG) semiconductor, which is vital for high-power, high-frequency electronics and deep-UV optoelectronics. It is especially significant for flexible wearable electronics, enabling the fabrication of high-performance Ga2O3-based devices at low temperatures. However, the limited crystallinity and pronounced structural defects arising from the low-temperature deposition of Ga2O3 films significantly restrict the heterojunction interface quality and the relevant electrical performance of Ga2O3-based devices. In this work, cuprous oxide (Cu2O)/Zr-doped β-Ga2O3 heterojunction diodes are fabricated by magnetron sputtering without intentional substrate heating, followed by an investigation into their microstructure and electrical behaviors. Zr doping can markedly enhance the Ga2O3 crystallinity at low substrate temperatures, transforming the amorphous structure of pristine Ga2O3 films into the crystallized β phase. Moreover, crystalline β-Ga2O3 facilitates the epitaxial growth of the Cu2O phase, suppressing the formation of detrimental secondary phase CuO at the heterojunction interface. Benefiting from the high-quality heterojunction interface, the Cu2O/Zr-doped β-Ga2O3 heterojunction diode exhibits a near-ideal electrical behavior with a low ideality factor of 1.6. The consistent electrical parameters extracted from current-voltage (J-V) and capacitance-voltage (C-V) measurements also confirm the high quality of β-Ga2O3. This work highlights the potential for the low-temperature production of high-quality β-Ga2O3-based heterojunction devices through Zr doping.

Modern biological methods of processing plant raw materials used to increase its storage capacity

Foodborne illnesses, mainly infectious, are a leading cause of morbidity and mortality worldwide. Pathogenic bacteria are present at virtually every stage of the food production chain, compromising company food safety programs and causing out-breaks of foodborne illnesses in various regions of the world. Finding new solutions that provide adequate microbiological stability to minimally processed foods is key to controlling bacterial pathogens that cause foodborne illnesses. The use of chemical and physical methods of food preservation often leads to a deterioration in their nutritional value, physical and organoleptic properties. Minimally processed foods produced without any radical preservation methods may be at particular risk of developing microorganisms, including pathogens. Low-temperature production processes and refrigerated storage promote the development of psychrophilic microorganisms; another threat is posed by high microbiological contamination of raw materials. To preserve the quality of food products, the most commonly used physicochemical methods include modified atmosphere packaging, membrane methods or ultrasound. Alternatively, biological methods can be used: bacteriophages and phage cocktails, bacteriocins, inactivation of plant tissue degradation enzymes, phytochemicals, edible coatings. Moreover, they can be used either individually to limit the growth of bacteria in the food environment, or in combination with other methods in order to achieve maximum effect. This article discusses the main biological methods of combating pathogenic bacteria most commonly found in the food environment. The purpose of this review was to consider existing biological methods for processing plant objects, as well as to identify the advantages and disadvantages of each method.

Teak leaf biochar production for sustainable forest waste management at low temperatures

This study investigates the possibilities of producing biochar from teak leaves as an environmentally beneficial approach to managing forest waste in a sustainable manner. Teak leaves, a readily available forest by-product, were converted into biochar through a low-temperature pyrolysis process using a top-lit updraft mechanism. The results demonstrate the efficiency of this approach, yielding a substantial biochar output of 37.4 wt%, with its thermal field modelled perfectly via Levenberg-Marquardt algorithm in ANN topology. Elemental analysis of the teak leaf biochar revealed a high carbon content of 64.40%, positioning it as a valuable carbon-rich material suitable for various applications. Textural properties analysis indicated a significant surface area of 371.78 m2/g and a total pore volume of 0.175 cm³/g, enhancing its potential for various applications. Scanning Electron Microscopy (SEM) investigations showed a diverse network of pores and a rough surface structure, reinforcing the biochar’s versatility. This study shows the environmental benefits of low-temperature teak leaf biochar production, because it provides a carbon-content-preserving, sustainable alternative for handling forest wastes.

Improving the storage quality of Harbin red sausages by quaternized chitosan/sodium alginate coating curcumin nano-emulsion

In this study, the effect of sodium alginate and quaternized chitosan bis-polysaccharide-based shell transport curcumin nano-emulsions (Cur@QCS/SA) on the microbiological, physicochemical properties, quality characteristics of Harbin red sausage during storage is investigated. According to the microbiological results, the shelf life of Harbin red sausage is extended from 3 d to 6 d by adding 0.15% Cur@QCS/SA, and Bacillus is the most predominant bacterial before 6 d. Additionally, the physicochemical properties change significantly, the pH, weight loss (WL), water holding capacity (WHC), water activity (aw), L*, and a* of red sausage decrease gradually with the extension of storage time, as well as b*, lipid oxidation, proteolysis increase significantly (P < 0.05). Secondly, it is found that 0.15% treatment group can better maintain the quality characteristics of Harbin red sausage according to texture profile analysis (TPA), electronic nose (E-nose), and electronic tongue (E-tongue) (P < 0.05). This study provides a new way for nano-emulsions in food applications and a new option for the preservation of Harbin red sausage as well as other low-temperature meat products.

Temperature-Dependent Products in Gallium Flux Reactions of Cerium and Transition Metals.

Reactions of cerium and transition metals in excess molten gallium were carried out, exploring the formation of different cerium intermetallics as the flux reaction is cooled. Ce/T/Ga reactions with T = Ni, Cu, Pd, Ag, and Zn produce a high-temperature product, which converts into a low-temperature product in the flux. The phases present in the flux mixture were determined by quenching identical reactions at 750 and 300 °C and identifying the isolated products using elemental analysis and X-ray diffraction. The compounds CeGa2, CeCu0.37Ga3.63, CePd0.32Ga3.68, Ce5Ag1.76Ga17.29, and Ce5Zn1.37Ga17.73 were isolated by quenching at 750 °C. Upon cooling to 300 °C, the corresponding reactions instead yielded CeGa6, Ce2CuGa12, Ce2PdGa12, Ce2Ag0.7Ga9.1, and CeZnxGa7-x. All of these structures contain cerium in the ThCr2Si2-related layers. Large crystals of high-temperature products CeCu0.37Ga3.63, CePd0.32Ga3.68, Ce5Ag1.76Ga17.29, and Ce5Zn1.37Ga17.73 were used for magnetic susceptibility measurements. All of these materials show highly anisotropic ferromagnetic ordering of Ce3+ moments below 8 K, which is in contrast to the antiferromagnetism seen for the compounds that were isolated at 300 °C.

Low-temperature hydrogen production from waste polyethylene by nonthermal plasma (NTP)-assisted catalytic pyrolysis using NiCeOx/β catalyst

Conventional catalytic pyrolysis of waste plastics for H2 production faces challenges due to excessively high reaction temperatures. This study introduced a NiCeOx/β catalyst for low-temperature H2 production from polyethylene (PE), aiming to enhance H2 yield through nonthermal plasma (NTP) and catalytic active sites. Experimental results confirmed the efficacy of NTP in promoting collision between high-potential-energies active species and plasma-catalyst interactions, identifying acidic sites as primary catalytic active sites. Both experiments and density functional theory (DFT) calculations confirmed NiO and CeO2 particles as metallic active sites, exhibiting thermodynamic and kinetic benefits for primary products from PE pyrolysis. Under optimal conditions, the highest H2 yield and selectivity respectively reached 32.71 mmol/g and 82.10 % at a PE/(NiCeOx/β) ratio of 1:4, reaction temperature of 400 °C, and NTP discharge power of 210 W. The NiCeOx/β catalyst facilitated low-temperature pyrolysis of waste plastics, enhancing H2 selectivity and yield.

Characteristics of Low-Temperature Gasification Products from Wheat Straw in a Fluidized Bed Based on Cement Production Process

Characteristics of Low-Temperature Gasification Products from Wheat Straw in a Fluidized Bed Based on Cement Production Process