Exopolymer Production Research Articles

Linking feed, biodiversity, and filtration performance in a Self-Forming Dynamic Membrane BioReactor (SFD MBR) treating canning wastewater

A bench-scale self-forming dynamic membrane bioreactor (SFD MBR) treating canning wastewater showed instable filtration performance, with a worsening in correspondence of a change in the influent quality. To unveil the possible reasons for such behaviour, a microbial investigation was carried out to complement conventional filterability and settleability tests. The microbial communities of the influent wastewater, the activated sludge, and the filtering sludge cake (dynamic membrane) were characterised through metagenomic and differential abundance analyses. In parallel, the production of exopolymers was measured. The outputs indicate that under the tested conditions the canning wastewater promoted the development of a very peculiar microbial ecosystem, with a strong selection of the genus Thiothrix (relative abundance above 90 %). The Shannon index values in activated sludge were below 2, indicating a very low bacterial diversity. This may have limited the ecosystem resilience towards changes of external conditions, causing instability in the process of the dynamic membrane formation. Furthermore, the diversity analysis showed that the bacterial compositions of the feed and the sludge resulted not significantly linked to each other, confirming the main role of the chemical composition of the influent wastewater on overall process performances. When treating agro-industrial streams, in-depth feed characterisation is recommended in order to prevent the factors that may generate instability in SFD MBR performance.

Marine bacteria Alteromonas spp. require UDP-glucose-4-epimerase for aggregation and production of sticky exopolymer.

Heterotrophic marine bacteria have a central role in the global carbon cycle. Well-known for releasing CO2 by decomposition and respiration, they may also contribute to particulate organic matter (POM) aggregation, which can promote CO2 sequestration via the formation of marine snow. We find that two members of the prevalent particle-associated genus Alteromonas can form aggregates comprising cells alone or cells and chitin particles, indicating their ability to drive POM aggregation. In line with their multivalent aggregation capability, both strains produce TEP, an excreted polysaccharide central to POM aggregation in the ocean. We demonstrate a genetic requirement for galE in aggregation and large TEP formation, building our mechanistic understanding of these aggregative capabilities. These findings point toward a role for heterotrophic bacteria in POM aggregation in the ocean and support broader efforts to understand bacterial controls on the global carbon cycle based on microbial activities, community structure, and meta-omic profiling.

Aerobic granulation and resource production under continuous and intermittent saline stress

Three sequential batch reactors (SBR) were operated to evaluate salt addition's impact on granulation, performance, and biopolymer production in aerobic granular sludge (AGS) systems. System R1 was fed without adding salt (control); system R2 operated with saline pulses, i.e., one cycle with salt (2.5 g NaCl/L) addition followed by another without salt; and R3 received continuous supplementation of 2.5 g NaCl/L. The results indicated that the reactors supplemented with salt presented higher concentrations of mixed liquor volatile suspended solids (MLVSS) and better settleability than R1, showing that osmotic pressure contributed to biomass growth, accelerated granulation, and improved physical characteristics. The faster granulation occurred in R2, thus proving the beneficial effects of intermittent salt addition through alternating pulses. Salt addition did not impair the simultaneous removal of carbon, nitrogen, and phosphorus. In fact, R2 showed better carbon removals. In conclusion, continuous or intermittent (pulsed) supplementation of 2.5 g NaCl/L did not lead to increased production of extracellular polymeric substances (EPS) and alginate-like exopolymers (ALE). This outcome could be attributed to the low saline concentration employed, a higher food-to-microorganism (F/M) ratio observed in R1, and possibly greater endogenous consumption of biopolymers in the famine period in R2 and R3 due to the greater solids retention time (SRT). Therefore, this study brings important results that contribute to a better understanding of the effect of salt in continuous dosing or in pulses as a selection pressure strategy to accelerate granulation, as well as the behavior of the AGS systems for saline effluents.

Influence of operating regime on resource recovery in aerobic granulation systems under osmotic stress

Aerobic granular sludge (AGS) systems have great potential for biopolymers recovery, especially when subjected to adverse conditions. This work aimed to study the production of alginate-like exopolymers (ALE) and tryptophan (TRY) under osmotic pressure in conventional and staggered feeding regimes. The results revealed that systems operated with conventional feed accelerated the granulation, although less resistant to saline pressures. The staggered feeding systems favored better denitrification conditions and long-term stability. Salt addition gradient increase influenced biopolymers’ production. However, staggered feeding, despite decreasing the famine period, did not influence the production of resources and extracellular polymeric substances (EPS). Sludge retention time (SRT), which was not controlled, proved to be an important operational parameter with negative influences on biopolymers’ production in values greater than 20 days. Thus, the principal component analysis confirmed that the production of ALE at low SRT is related to better-formed granules with good sedimentation characteristics and good AGS performances.

AN INTEGRATED APPROACH FOR SAFE REMOVAL OF CHROMIUM (VI) BY BREVIBACTERIUM SP.

Chromium (VI) tolerant Brevibacterium sp. AKR2 was isolated from the tannery effluent polluted site and consequently screened for chromate removal potential and exopolymer production. This strain showed stable growth with white-gray colonies on LB-agar plates supplemented with chromate (1500mg/L). Strain AKR2 was taxonomically identified by 16S rRNA sequencing as Brevibacterium sp. (MN932133). Presumptive biochemical tests were also performed. This strain was found to have multiple heavy metals and antibiotic tolerance patterns. Additionally, the tolerance profile of Brevibacterium sp. against Cr(VI) (2-30mg/mL) was investigated. Cr(VI) reduction ability at 1000 and 1500mg/L of K2CrO4 highlighted that the strain AKR2 reduced 91 and 86% of chromate oxyanions, respectively, after 24h of incubation. Enhanced exopolymer i.e. 1.275mg/mL dry weight was observed by growing in LB-broth medium under chromate stress conditions 1500mg/L as compared to EPS yield under non-stress 0.15mg/mL. Hence, the current investigation suggests the possible use of chromate resistant Brevibacterium sp. as an emerging tool for remediating the sites polluted with elevated levels of Cr(VI).

Seasonal variability in carbon:234thorium ratios of suspended and sinking particles in coastal Antarctic waters: Field data and modeling synthesis

238U–234Th disequilibrium is a powerful tool for investigating particle cycling and carbon export associated with the ocean's biological carbon pump. However, the interpretation of this method is complicated by multiple processes that can modify carbon:thorium ratios over small spatial scales. We investigated seasonal variability in the thorium and carbon cycles at a coastal site in the Western Antarctic Peninsula. Throughout the ice-free summer season, we quantified carbon and 234Th vertical flux, total water column 234Th, particulate 234Th, and the C:234Th ratios of sinking material and bulk suspended material. Simultaneous identification and separation of fecal pellets from sinking material showed that fecal pellets (primarily from krill) contributed 56% of carbon flux and that as a result of lower C:234Th ratios than suspended particles, these fecal pellets were primary drivers of variability in the C:234Th ratios of sinking material. Bulk suspended particles had highly variable C:234Th ratios and were consistently elevated in the euphotic zone relative to deeper waters. The fraction of 234Th adsorbed onto particles was positively correlated with chlorophyll and particulate organic carbon (POC) concentrations. The C:234Th ratios of suspended particles were positively correlated with POC, although during the spring diatom bloom C:234Th ratios were lower than would have been predicted based on POC concentrations alone. We hypothesize that diatom production of transparent exopolymers may have led to enhanced rates of thorium adsorption during the bloom, thus decreasing the C:234Th ratios. We used a Bayesian model selection approach to develop and parameterize mechanistic models to simulate thorium sorption dynamics. The best model incorporated one slowly-sinking POC pool and rapidly-sinking fecal pellets, with second-order sorption kinetics. The model accurately simulated temporal patterns in the C:234Th ratios of sinking and suspended particles and the fraction of 234Th adsorbed to particles. However, it slightly over-estimated C:234Th ratios during the spring (diatom-dominated) bloom and underestimated C:234Th ratios during the fall (mixed-assemblage) bloom. Optimized model parameters for thorium sorption and desorption were 0.0047 ± 0.0002 m3 mmol C−1 d−1 and 0.017 ± 0.008 d−1, respectively. Our results highlight the important role that specific taxa can play in modifying the C:234Th ratio of sinking and suspended particles and provide guidance for future studies that use 234Th measurements to investigate the functional relationships driving the efficiency of the biological pump.

Effects of bacterial exopolysaccharide on rheological properties of acid milk curd and its correlates

Exopolysaccharide (EPS) is a general term for the forms of bacterial polysaccharides found outside the cell wall of bacteria. The industrial microbiologist has become interested in exploiting microbial exopolymer production due to an increasing interest and need for novel polysaccharides. The use of bacterial EPS in acid milk curd (AMC) production accounts for a quality improvement of the milk curd in terms of stability during the normal operations of storage and transportation. On the other hand, EPS have been used as prebiotic because of its health-promoting effects in human beings. The objective of this study was to evaluate the rheological properties (RP) and their statistical correlations in acid milk curd (AMC) samples added with bacterial EPS. Rheometric properties are suitable parameters to evaluate food quality such as AMC. Some of the RP normally used in this evaluation include elastic modulus (EM), hardness (HR), breaking energy (BE), viscosity (VIS) and stress. Correlation between pairs of these parameters are important to understand in order to predict statistically other parameters in case they cannot be easily determined. Acid milk curd samples were formulated using 10, 15, and 20 % of reconstituted skim milk (RSM), to which 0, 0.2, 0.4, 0.6, 0.8, and 1 % level of EPS were added, respectively. Samples were pasteurized at 60 o C for 30 min, and at 85 oC for 30s. Afterwards, AMC samples were tempered to 40 °C inoculated with Lactobacillus delbrueckii subsp. bulgaricus B-5b, and incubated at 37 °C for 16 h. Results indicated that viscosity and hardness showed the strongest and highest correlation among all the parameters evaluated (r=0.9272) and it was comparable to that between viscosity and breaking energy (r=0.8349) and breaking energy and hardness (r=0.7694). However, elastic modulus and viscosity showed a rather low correlation (r=0.5394) and very low correlation (r=0.1830), respectively, suggesting that estimation of elastic modulus from viscosity values would be inaccurate. In general, rheometric properties of acid milk curd increased with higher EPS concentrations until 1 % level of EPS addition. Therefore, it is recommended to use BE and HR values, and BE and VIS values to predict accurate measurements of other RP values. Key words: Exopolysaccharide (EPS), acid milk curd (AMC), rheometric properties (RP), statistical correlation (SC)

Simultaneous and selective production of exopolymers and polyols by metabolically engineered Bacillus licheniformis strains

Bacillus licheniformis has tremendous potential for the production of exopolymers that include polyglutamic acid (PGA), levan and exopolysaccharide (EPS); and polyols among which are glycerol and 2,3-butanediol (BDO) isomers. For simultaneous and selective production of exopolymers and polyols, cultivation/fermentation, metabolic engineering, and separation technologies were combined and evaluated in this study. Specific exopolymers could be produced by changing carbon source and temperature, and through biofilm-associated gene (epsAB and pgsBCAE) manipulation. The specific production of polyols was achieved by the deletion of appropriate genes (dgp, budC, and gdh). The most efficiently and selectively produced exopolymer and polyol were levan and (2 R,3 S)-BDO. Fed-batch fermentation confirmed that 71.0 g/L of levan with 99% selectivity of exopolymer and 88.6 g/L of (2 R,3 S)-BDO with 100% selectivity of polyol could be obtained in 72 h. Simultaneous and selective production of various combinations of exopolymers and polyols appears to be feasible for efficient production of bio-based products.

Partial characterization of viscous exopolymer produced by Alkalihalobacillus sp. strain SB-D (KJ372395) with emulsification and adhesive properties.

Twenty-two alkaliphilic bacteria were isolated from spent waters of an agrochemical factory, Goa, India, and screened for exopolymer (EP) production on Horikoshi I/II media. Strain SB-D produced highly viscous cell-bound and extracellular EP quantified by alcian blue adsorption assay. The 16S rRNA gene sequence of strain SB-D showed 97.34% similarity to Alkalihalobacillus lehensis strain MLBT. The strain maximally produced EP (10.3g/L) at pH 10.3, 25°C after 16h growth on shaker, followed by 4h at static condition with 4% inoculum in the presence of 3% glucose and 0.1% yeast extract. The EP precipitated using isopropanol contained carbohydrates (212µg/mg), lipids (130µg/mg), and proteins (86.16µg/mg) as major components. Further, gas chromatography detected the presence of D-glucose, D-arabinose, D-mannose, D-galactose, D-xylose and D-ribose. Preliminary studies on EP characterization revealed emulsification and adhesive properties of the exopolymer.

Investigation and Rapid Discrimination of Food-Related Bacteria under Stress Treatments Using IR Microspectroscopy.

Because the robust and rapid determination of spoilage microorganisms is becoming increasingly important in industry, the use of IR microspectroscopy, and the establishment of robust and versatile chemometric models for data processing and classification, is gaining importance. To further improve the chemometric models, bacterial stress responses were induced, to study the effect on the IR spectra and to improve the chemometric model. Thus, in this work, nine important food-relevant microorganisms were subjected to eight stress conditions, besides the regular culturing as a reference. Spectral changes compared to normal growth conditions without stressors were found in the spectral regions of 900–1500 cm−1 and 1500–1700 cm−1. These differences might stem from changes in the protein secondary structure, exopolymer production, and concentration of nucleic acids, lipids, and polysaccharides. As a result, a model for the discrimination of the studied microorganisms at the genus, species and strain level was established, with an accuracy of 96.6%. This was achieved despite the inclusion of various stress conditions and times after incubation of the bacteria. In addition, a model was developed for each individual microorganism, to separate each stress condition or regular treatment with 100% accuracy.

Microbial Biofilms and Biotechnology – Some Perceptions

The review is an attempt to introduce the readers in brief about biofilms and their implications as well as some new perceptions in biotechnology. Biofilms are adherent microbial communities, which are developed on submerged surfaces in aquatic environments. Biofilms play a significant role in exopolymer production, material deterioration and also cause harmful infections. Further, the role of corrosion causing biofilm bacteria in deterioration of different materials, microbial biofilms and their enzymatic processes in reducing the toxicity of pollutants in industrial effluents are elaborated, along with clean technologies for wastewater treatment. Biotechnology is defined as any technological application that uses biological systems to synthesize or modify products or processes. The applications include biochemical processes, medical care, cell and tissue culture, as well as synthetic biology and others. Synthetic biology details about the design, construction of new biological components and systems for useful purposes. Finally, to overcome the limitations that are inherent to the use of cellular host’s, cell-free systems as critical platforms for synthetic biology applications. This mini-review also mentions new diagnostic products based on enzymes, monoclonal antibodies and engineered proteins, as well as novel prophylactic vaccines.

Temporal and Spatial Variations in Particle Fluxes on the Chukchi Sea and East Siberian Sea Slopes From 2017 to 2018

Time-series sediment traps were deployed on the Chukchi Sea and East Siberian Sea slopes from August 2017 to August 2018 with the aim of elucidating the temporal and spatial variations in particle fluxes and identifying the main processes affecting those variations. Particle fluxes showed a typical seasonal pattern, with high values in summer and low values in other seasons, and a large inter-annual variation was observed only on the East Siberian Sea slope, where particle fluxes were one order of magnitude higher in early August 2018 than in late August 2017. This large inter-annual variation in particle flux resulted from the episodic intrusion of nutrient-enriched shelf water in the East Siberian Sea, which enhanced biological production at the surface and particle fluxes. The Chukchi Sea slope was influenced by the inflow of Anadyr Water, with high salinity and high nutrient concentrations, which had little annual variability. Therefore, particle flux showed little inter-annual variation on the Chukchi Sea slope. Under-ice phytoplankton blooms were observed in both the Chukchi Sea and East Siberian Sea slopes, and increases in particulate organic carbon (POC) flux and the C:N ratio under the sea ice were related to transparent exopolymer (TEP) production by ice algae. On the East Siberian Sea slope, particle fluxes increased slightly from 115 to 335 m, indicating lateral transport of suspended particulate matter; POC and lithogenic particles may be laterally transported to the slope as nutrient-rich shelf waters flowed from the East Siberian Sea to the Makarov Basin. Annual POC fluxes were 2.3 and 2.0 g C m–2 year–1 at 115 and 335 m, respectively, on the East Siberian Sea slope and was 2.1 g C m–2 year–1 at 325 m on the Chukchi Sea slope. Annual POC fluxes were higher on the Chukchi Sea and East Siberian Sea slopes than in Arctic basins, lower than on Arctic shelves, and generally similar to those on western Arctic slopes.

Improved Exopolymer Production by Chromohalobacter canadensis Cultures for Its Potential Cosmeceutical Applications

Several exopolymers with different chemical composition and correspondingly variety in their physico-chemical properties from halophilic microorganisms have still been described, however, with a low production yield. Chromohalobacter canadensis 28 isolated from Pomorie saltern synthesized an unusual exopolymer (EP) containing 72% γ-polyglutamic acid (PGA), an essential cosmeceutical additive. Current work suggests a novel approach for effective EP synthesis by C. canadensis 28 using continuous cultures. Highest production was observed at low dilution rates reaching a level of 2.1 mg/mL at D = 0.035, similar to those in batch cultures (2.34 mg/mL), however avoiding all disadvantages of discontinuous fermentation processes. At steady state, the total quantities of the synthesized EP after 48 h cultivation for the given equipment volume in D = 0.035 h−1 and D = 0.075 h−1 were 8.67 and 12 g, correspondingly, while it was 2.9 g for batch culture. Process parameters did not change after a ten-day run at D = 0.35 h−1. A degree of purity of EP fraction received from continuous cultures was significantly increased up to 93–96%. A lack of cytotoxicity and high cell viability were observed for human dermal fibroblast cells after 24 h incubation with crude EP from C. canadensis 28 and purified PGA fraction that could suggest its high potential for cosmetic applications.

Assessing the Temporal Variability and Drivers of Transparent Exopolymer Particle Concentrations and Production Rates in a Subtropical Estuary

Transparent exopolymer particles (TEP) are the central mechanism by which carbon is shuttled from the surface to the deep ocean. Despite the importance of these particles, the magnitude and drivers of temporal variability in the concentration and production rate of TEP in the ocean are not well resolved, especially in highly dynamic and productive regions like estuaries. Here, TEP dynamics were evaluated across weekly, tidal, and diel time scales within the Skidaway River Estuary (GA, USA) and adjacent coastal waters in the South Atlantic Bight. No significant trends in TEP concentration or production rates were observed over weekly time scales, though over tidal cycles, TEP concentration varied between tide stage and TEP:chlorophyll ratios were always lower at low relative to high tides. Over sequential diel cycles, TEP concentrations were two times higher at night relative to midday. Different biological and environmental variables were correlated with TEP dynamics (Spearman ρ) depending on the time scale considered, reinforcing the importance of time-specific drivers of TEP. These results emphasize the importance in considering the temporal variability of field-based TEP measurements, with implications for accurate assessments of carbon cycling in coastal ecosystems and the incorporation of TEP into carbon export models.

Bacteria-mediated aggregation of the marine phytoplankton Thalassiosira weissflogii and Nannochloropsis oceanica

The ecological relationships between heterotrophic bacteria and marine phytoplankton are complex and multifaceted, and in some instances include the bacteria-mediated aggregation of phytoplankton cells. It is not known to what extent bacteria stimulate aggregation of marine phytoplankton, the variability in aggregation capacity across different bacterial taxa or the potential role of algogenic exopolymers in this process. Here we screened twenty bacterial isolates, spanning nine orders, for their capacity to stimulate aggregation of two marine phytoplankters, Thalassiosira weissflogii and Nannochloropsis oceanica. In addition to phytoplankton aggregation efficiency, the production of exopolymers was measured using Alcian Blue. Bacterial isolates from the Rhodobacterales, Flavobacteriales and Sphingomonadales orders stimulated the highest levels of cell aggregation in phytoplankton cultures. When co-cultured with bacteria, exopolymer concentration accounted for 34.1% of the aggregation observed in T. weissflogii and 27.7% of the aggregation observed in N. oceanica. Bacteria-mediated aggregation of phytoplankton has potentially important implications for mediating vertical carbon flux in the ocean and in extracting phytoplankton cells from suspension for biotechnological applications.

Novel Psychrophiles and Exopolymers from Permafrost Thaw Lake Sediments

Thermokarst lakes are one of the most abundant types of microbial ecosystems in the circumpolar North. These shallow basins are formed by the thawing and collapse of ice-rich permafrost, with subsequent filling by snow and ice melt. Until now, permafrost thaw lakes have received little attention for isolation of microorganisms by culture-based analysis. The discovery of novel psychrophiles and their biomolecules makes these extreme environments suitable sources for the isolation of new strains, including for potential biotechnological applications. In this study, samples of bottom sediments were collected from three permafrost thaw lakes in subarctic Québec, Canada. Their diverse microbial communities were characterized by 16S rRNA gene amplicon analysis, and subsamples were cultured for the isolation of bacterial strains. Phenotypic and genetic characterization of the isolates revealed affinities to the genera Pseudomonas, Paenibacillus, Acinetobacter, Staphylococcus and Sphingomonas. The isolates were then evaluated for their production of extracellular enzymes and exopolymers. Enzymes of potential biotechnological interest included α and β-glucosidase, α and β-maltosidase, β-xylosidase and cellobiohydrolase. One isolate, Pseudomonas extremaustralis strain 2ASCA, also showed the capability to produce, in the loosely bound cell fraction, a levan-type polysaccharide with a yield of 613 mg/L of culture, suggesting its suitability as a candidate for eco-sustainable alternatives to commercial polymers.

High bioreactor production and emulsifying activity of an unusual exopolymer by Chromohalobacter canadensis 28.

Unusual composition of an exopolymer (EP) from an obligate halophilic bacterium Chromohalobacter canadensis 28 has triggered an interest in development of an effective bioreactor process for its production. Its synthesis was investigated in 2‐L bioreactor at agitation speeds at interval 600‐1000 rpm, at a constant air flow rate of 0.5 vvm; aeration rates of 0.5, 1.0, and 1.5 vvm were tested at constant agitation rate of 900 rpm. EP production was affected by both, agitation and aeration. As a result twofold increase of EP yield was observed and additionally increased up to 3.08 mg/mL in a presence of surfactants. For effective scale‐up of bioreactors mass transfer parameters were estimated and lowest values of KLa obtained for the highest productivity fermentation was established. Emulsification activity of EP exceeded that of trade hydrocolloids xanthan, guar gum, and cellulose. A good synergism between EP and commercial cellulose proved its potential exploration as an enhancer of emulsifying properties of trade emulsions. A pronounced lipophilic effect of EP was established toward olive oil and liquid paraffin. Cultivation of human keratinocyte cells (HaCaT) with crude EP and purified γ‐polyglutamic acid (PGA) showed higher viability than control group.

Comparative assessment of exopolymer production and chemical characteristics of two environmental biofilm isolates of Pseudomonas aeruginosa

Two Pseudomonas aeruginosa isolates from natural biofilms (marine and freshwater environment) were investigated for exopolymer (EPS) production and chemical characterization. Both the isolates were categorized using molecular tools as P. aeruginosa species, The EPS production was distinct with various carbon and nitrogen sources, the average EPS yield by the two Pseudomonas strains was 55 µg ml-1. Modelling was done to establish the relation between observed and predicted EPS yields. The chemical composition, FTIR and Raman spectroscopy analysis of the two EPS showed that carbohydrate content was more in marine strain, while protein content was relatively high in the freshwater strain. Thermo-gravimetric analysis of the two EPS showed endothermic decomposition. Biochemical study by gel permeation chromatography showed that the marine strain EPS is a highly glycosylated biomolecule, while the freshwater EPS is a weakly glycosylated biomolecule with molecular weights 140,000 and 300,000 Daltons respectively. The EPS produced by the two Pseudomonas isolates has implication in process and chemical industries.

Kinetic of Adhesion of S. epidermidis with Different EPS Production on Ti6Al4V Surfaces.

Controlling initial bacterial adhesion is essential to prevent biofilm formation and implant-related infection. The search for surface coatings that prevent initial adhesion is a powerful strategy to obtain implants that are more resistant to infection. Tracking the progression of adhesion on surfaces from the beginning of the interaction between bacteria and the surface provides a deeper understanding of the initial adhesion behavior. To this purpose, we have studied the progression over time of bacterial adhesion from a laminar flow of a bacterial suspension, using a modified Robbins device (MRD). Comparing with other laminar flow devices, such as the parallel plate flow chamber, MRD allows the use of diverse substrata under the same controlled flow conditions simultaneously. Two different surfaces of Ti6Al4V and two strains of Staphylococcus epidermidis with different exopolymer production were tested. In addition, the modified Robbins device was examined for its convenience and suitability for the purpose of this study. Results were analyzed according to a pseudofirst order kinetic. The values of the parameters obtained from this model make it possible to discriminate the adhesive behavior of surfaces and bacteria. One of the fitting parameters depends on the bacterial strain and the other only on the surface properties of the substrate.

Molecular characterization of acutely and gradually heavy metal acclimated aquatic bacteria by FTIR spectraoscopy.

In the environment, bacteria can be exposed to the concentration gradient of toxic heavy metals (gradual) or sudden high concentration of them (acute). In both situations, bacteria get acclimated to toxic heavy metal concentrations. Acclimation causes metabolic and molecular changes in bacteria. In this study, we aimed to understand whether there are differences between molecular profiles of the bacteria (Brevundimonas, Gordonia and Microbacterium) which are under acute or gradual exposure to cadmium or lead by using ATR-FTIR spectroscopy. Our results revealed the differences between the acclimation groups in membrane dynamics including changes in the structure and composition of the membrane lipids and proteins. Furthermore, protein concentrations decreased in acclimated bacterial groups. Also, a remarkable increase in exopolymer production occurred in acclimated groups. Interestingly, bacteria under acute cadmium exposure produced the significantly higher amount of exopolymer than they did under gradual exposure. On the contrary, under lead exposure gradually acclimate strains produced significantly higher amounts of exopolymer than those of acutely acclimated ones. This information can be used in bioremediation studies to obtain bacterial strains producing a higher amount of exopolymer.