Biosurfactant Production Research Articles

Production of Biossurfactants with Aquous Extract of Carobas Using Bacillus safensis

Objective: This study evaluated the production of biosurfactants by Bacillus safensis using aqueous extract of mesquite. Theoretical Framework: Biosurfactants are surface-active molecules of microbial origin with low toxicity and high biodegradability, which differentiate them from synthetic surfactants. Method: The experiments were conducted in a shaker (200 rpm and 37 ºC), with 10% (v/v) aqueous extract of mesquite supplemented with 1% (w/v) yeast extract. The production of biosulfant was evaluated by analyzing the kinetic parameters and emulsification index. Results and Discussion: The experiments with yeast extract supplementation showed better performance in the production of biosurfactants. The maximum specific growth rate was 0.209 h-1, substrate conversion factor in cells was 0.190 gx/gs and 0.041 g/mL of crude biosurfactant in 124 h of cultivation, whose emulsification was 55.20% in mineral oil. The biosurfactant produced had lipopeptide characteristics. Research Implications: The research suggests that aqueous mesquite extract may be a viable and economical alternative as a substrate to produce biosurfactants, especially lipopeptides. Supplementation with yeast extract significantly improved the cultivation performance, indicating that adjustments in the medium formulation may further enhance the efficiency of the process. Originality/Value: This study contributes significantly to literature by exploring an innovative approach to produce biosurfactants, using aqueous mesquite extract as a low-cost substrate. The originality of the research lies in the use of undervalued raw material, demonstrating its potential to replace more expensive traditional sources in the production of biotechnological compounds.

Direct conversion of dissolved air flotation sludge to mannosylerythritol lipids by Moesziomyces aphidis

AbstractDissolved air flotation (DAF) sludge from wastewater treatment plants is often a lipid‐rich waste stream, which is now mostly being converted to biogas. Due to its high carbon content, DAF sludge has great potential in biotechnological applications. MEL production with floated grease from a sauce producer as substrate resulted in the accumulation of 1.1 ± 0.1 g/L MEL. With enhanced aeration through the use of baffled shaking flasks, MEL titres increased up to 9.7 ± 0.5 g/L. An adaptation period of 9 days was observed, after which the specific productivity reached 0.20 g/L.h. This study shows for the first time biosurfactant production from DAF sludge, with promising titres. Further research should focus on reducing the lag phase to increase productivity.

Crude Oil Biodegradation by a Biosurfactant-Producing Bacterial Consortium in High-Salinity Soil

Bioremediation is a promising strategy to remove crude oil contaminants. However, limited studies explored the potential of bacterial consortia on crude oil biodegradation in high salinity soil. In this study, four halotolerant strains (Pseudoxanthomonas sp. S1-2, Bacillus sp. S2-A, Dietzia sp. CN-3, and Acinetobacter sp. HC8-3S), with strong environmental tolerance (temperature, pH, and salinity), distinctive crude oil degradation, and beneficial biosurfactant production, were combined to construct a bacterial consortium. The inoculation of the consortium successfully degraded 97.1% of total petroleum hydrocarbons in 10 days, with notable removal of alkanes, cycloalkanes, branched alkanes, and aromatic hydrocarbons. Functional optimization showed that this consortium degraded crude oil effectively in a broad range of temperature (20–37 °C), pH (6–9), and salinity (0–100 g/L). In salt-enriched crude-oil-contaminated soil microcosms, the simultaneous treatment of bioaugmentation and biostimulation achieved the highest crude oil degradation rate of 568.6 mg/kg/d, compared to treatments involving abiotic factors, natural attenuation, biostimulation, and bioaugmentation after 60 days. Real-time PCR targeting the 16S rRNA and alkB genes showed the good adaptability and stability of this consortium. The degradation property of the constructed bacterial consortium and the engineered consortium strategy may have potential use in the bioremediation of crude oil pollution in high-salinity soil.

Production and characterization of biosurfactants from lactic acid bacteria in Dadiah for strawberries edible coating

Biosurfactants are amphiphilic components applied in various fields, one of which is preserving agricultural products. Biosurfactants can be used as additives in edible coatings to prevent microbial adhesion by reducing surface tension on the fruit surface. They also play a role in increasing the moisture barrier and slowing down the physiological changes of fruit. Nonetheless, biosurfactants were often produced by non-GRAS bacteria. GRAS biosurfactant-producing bacteria are urgently needed for application in food products. This study aims to isolate and characterize biosurfactant-producing strains of lactic acid bacteria from Dadiah and evaluate their efficacy in reducing microbial adhesion on strawberries. From four selected isolates found in Dadiah, Lactiplantibacillus plantarum was the best candidate, producing biosurfactant with index emulsification (EI24) of 64.48 ± 0.37% with a CMC of 1 g/l. LC-MS and FT-IR characterized the biosurfactants as glycolipids. The rate of antibacterial and anti-adhesive tests on Escherichia coli ATCC 8739 were 18.79 ± 5.23% and 55.26 ± 0.02%, while on Staphylococcus aureus ATCC 6738 were 31.60 ± 2.63% and 74.63 ± 0.00% at a concentration of 3000 mg/l. However, no anti-fungal activity against Rhizopus stolonifer and Aspergillus niger was observed at the same concentration. Compared to SDS, biosurfactants demonstrated non-toxicity with an LC50 value of 2.94 x 108 mg/l. A combination of 1% chitosan reduced the number of fungal cells by 29.76 ± 3.25% on 125 mg/l biosurfactant and bacterial cells by 31.91 ± 5.06% on 1000 mg/l biosurfactant after 10 days, indicating their potential to reduce fruit spoilage and enhance microbial anti-adhesive properties of edible coatings.

A baroduric immobilized composite material promoting remediation of oil-polluted sediment at typical deep-sea condition: The performances and potential mechanisms

Contriving immobilized bioreagent is of great significance to enhance bioremediation of marine oil pollution. However, there remains a notable scarcity of correlational study conducted at deep sea condition. Herein, we first developed a baroduric microsphere encasing biotic and chemical materials to remediate oil-contaminated sediments at deep-sea microcosm. Total oil degradation efficiency of microsphere-treated group reached 71% within a month, representing an approximate 35% increase compared to natural remediation. Absorption and biodegradation by microsphere provided a comparable contribution to oil elimination. Together with scanning electron microscope observation, the physical mechanism was that the reticulate structure of microsphere surface facilitating oil adsorption and bacteria attachment. Via metabarcoding analysis for meta and metabolically-active microbes, we demonstrated the primary working center was located at the microsphere. Proteobacteria, Firmicutes, Bacteroidota and Desulfobacterota were the key activated bacteria. More importantly, we revealed the ecological mechanisms were associated with the following aspects: 1) the addition of microsphere significantly improved the metabolic activity of bacteria (particularly including several oil-degrading taxa); 2) the microspheres enhanced ecological stability and microbial functional diversification during bioremediation; 3) expressing activity of pathways involving oil component degradation, biosurfactant production, biofilm architecture, biogeochemical and energy cycling all were observed to be up-regulated in microsphere-treated samples. Altogether, our results provide important theoretical guidance and data support on application of immobilization technology in removing in-situ oil pollution of deep-sea sediment.

Isolation, Characterization and Molecular Identification of Bacteria Associated with Green and Brown Seaweeds

Aims: The co-existence of bacterial communities along with macroalgae in marine environment develops a mutualistic relationship resulting in functional advantages for both the groups. The present research studied the composition of epiphytic bacteria associated with green (Ulva spp.) and brown seaweeds (Sargassum spp. and Padina spp.) sampled off Maharashtra coast, India, and their physiological and bioactive properties. Study Design: Green and brown seaweeds were collected from three locations along Maharashtra coast and analyzed for the associated bacteria. Place and Duration of Study: Seaweed samples analyzed in this study were from Kelwa, Manori and Ratnagiri along the Maharashtra coast. The analysis was performed during June to September 2021. Methodology: Bacteria from freshly collected seaweed samples were homogenized in saline, 10-fold serially diluted and plated on Zobell marine agar. Distinct colonies were selected and identified by a series of biochemical tests, followed by partial 16SrRNA gene sequencing. The physiological characteristics of the isolated bacteria were studied by screening for temperature and salinity tolerance, production of protease, lipase, agarose, amylase and biosurfactants. Results: The total seaweed bacterial count ranged from 4.5 ×103 to 2.9 × 104 CFU/g. Seventy-seven bacteria were isolated, 44 (57.14%) and 33 (42.85%) isolates from green and brown seaweeds respectively. The 16SrRNA sequencing of 20 representative isolates revealed the dominance of Bacillus spp., followed by Vibrio spp. Growth at 0°C was exhibited by all bacteria except Bacillus tequilensis, Bacillus altitudinis, Oceanobacillus iheyensis and one isolate of Vibrio spp. A majority of the isolates grew at 45°C. Vibrio spp. exhibited protease, amylase, gelatinase, and agarase activities, whereas the biosurfactant activity was commonly associated with Bacillus spp. Conclusion: The results of this study illustrate the occurrence of seaweed-associated beneficial bacteria exhibiting bioactive properties with potential biomedical applications.

Exploring the potential of biosurfactants produced by fungi found in soil contaminated with petrochemical wastes

Biosurfactants are a diverse group of compounds derived from microorganisms, possessing various structures and applications. The current study was seeking to isolate and identify a new biosurfactant-producing fungus from soil contaminated with petrochemical waste. The bioprocess conditions were optimized to maximize biosurfactant production for Aspergillus carneus OQ152507 using a glucose peptone culture medium with a pH of 7.0 and a temperature of 35 °C. The carbon source was glucose (3%), and ammonium sulfate (0.25%) was utilized as the nitrogen source. For Aspergillus niger OQ195934, the optimized conditions involved a starch nitrate culture medium with a pH of 7.0 and a temperature of 30 °C. The carbon source used was sucrose (3.5%), and ammonium sulfate (0.25%) served as the nitrogen source. The phenol-H2SO4 and phosphate tests showed that the biosurfactants that were extracted did contain glycolipid and/or phospholipid molecules. They showed considerable antimicrobial activity against certain microbes. The obtained biosurfactants increased the solubility of tested polyaromatic hydrocarbons, including fluoranthene, pyrene, anthracene, and fluorine, and successfully removed the lubricating oil from contaminated soil and aqueous media surface tension reduction. Based on the obtained results, A. carneus and A. niger biosurfactants could be potential candidates for environmental oil remediation processes.

Isolation, Screening and Identification of Biosurfactant Producing Strain Nocardiopsis dassonvillei var B2 From Oil Contaminated Soil.

Petroleum and other oil manufacturing industries contribute to environmental pollution by releasing hazardous hydrocarbons. Biosurfactants offer a sustainable solution for mitigating oil pollution through emulsification processes, safeguarding agricultural soils, aquatic ecosystems, and human health. This study focuses on isolating, screening, and identifying actinomycetes producing biosurfactant from oil-polluted soil in the naval dockyard of Visakhapatnam. Biosurfactant production was successfully achieved utilizing Kim's medium, which was supplemented with olive oil serving as the carbon source. The evaluation involved preliminary identification tests, including oil displacement, Parafilm-M, and lipase activity assays, using sodium lauryl sulfate as the standard reference. Surface tension and emulsification index measurements were conducted, and the chemical composition of glycolipids and phospholipids was elucidated using phenol-sulfuric acid and phosphate assays. Glycolipids, specifically identified as rhamnolipids, were confirmed via cetyltrimethylammonium bromide (CTAB) testing and quantitatively analyzed using the orcinol method. The cell-free broth exhibited antagonistic activity against Gram-positive and negative bacilli.16S rRNA sequencing-based phylogenetic analysis was carried out by the NCIM, Pune, with the gene sequence being deposited in GenBank. Further characterization of isolate B2 included scanning electron microscopy (SEM) analysis, as well as physiological and biochemical assays. This study highlights the ability of Nocardiopsis dassonvillei var. B2, isolated from oil-polluted soil, to produce biosurfactants, specifically glycolipids identified as rhamnolipids. Our findings represent the first reported instance of biosurfactant production from isolate B2 originating from the naval dockyard in Visakhapatnam, Andhra Pradesh, India.

Identification and Antibacterial Activity Study of a Terrestrial Strain of Brevibacterium aureus 431

This study isolated and purified strain 431 from an animal probiotic product. Through staining and microscopic examination, colony morphology analysis, biochemical reaction tests, and 16S rDNA sequence alignment, the strain was identified and named Brevibacterium aureus 431. The study focused on the production of biosurfactants by strain 431, and antibacterial activity tests were conducted on the strain and its secondary metabolites. The results showed that strain 431 exhibited no resistance to 10 commonly used drugs, and its concentrated secondary metabolites were highly sensitive to the indicator bacterium Escherichia coli. Oral administration of strain 431 to BALB/c mice resulted in normal mental state, diet, and bowel movements, with no signs of illness or death, indicating that strain 431 is highly safe and non-pathogenic to mice. The study suggests that Brevibacterium aureus 431 has significant research value as a new source of actinomycetes and that its secondary metabolites have potential application value in the development of antibacterial drugs.

Optimized Rhamnolipid Production by a Pseudomonas marginalis C9 Strain Isolated from a Biopurification System to Enhance Pesticide Solubilization

Biopurification systems designed for pesticide treatment are a source of diverse bacteria with environmental and biotechnological applications, including Pseudomonas marginalis C9, which has been reported as a biosurfactant-producing bacterium. The optimization of biosurfactant produced from P. marginalis C9 to enhance the solubility of a hydrophobic pesticide of environmental interest was investigated. The response surface methodology (RSM) was used to optimize the combined effect of the initial pH (5–9), agitation (100–300 rpm), and temperature (24–32 °C) on biosurfactant production. A DASbox® automated mini-bioreactor system was used to evaluate the critical factors in biosurfactant production using a full factorial design (FFD). The results showed that the optimal culture conditions using RSM were a pH of 8.5, a temperature of 25 °C, and agitation at 200 rpm. The extraction yield of the biosurfactant was 7.40 g L−1, the surface tension was reduced to 27.45 mN m−1, and the critical micelle concentration (CMC) was 48.9 mg L−1. The FFD analysis indicated that a high agitation rate (300 rpm) strongly influenced the biosurfactant activity, regardless of the inlet oxygen supply (0.5–1.5 vvm). The rhamnolipid increased the water solubility of chlorpyrifos by 11.2- and 21.7-fold at the CMC and twice the CMC, respectively.

Discovery and characterization of novel lipopeptides produced by Virgibacillus massiliensis with biosurfactant and antimicrobial activities

The study aimed to evaluate the biosurfactants (BSs) production by SM-23 strain of Virgibacillus identified by phenotypical and WGS analysis as Virgibacillus massiliensis. We first demonstrated the lipopeptides production by Virgibacillus massiliensis specie and studied their biochemical and molecular analysis as well as their biological potential. The GC–MS analysis indicated that methyl.2-hyroxydodecanoate was the major fatty acid compound with 33.22%. The maximum BSs production was obtained in LB medium supplemented by 1% olive oil (v/v) at 30 °C and 5% NaCl with 1.92 g/l. The obtained results revealed the significant biosurfactants/bioemulsifier potential compared to triton X100 with E24 of 100%, and an emulsification stability SE of 83%. The lipopeptides types were identified by FTIR analysis. A strong antimicrobial action was observed by the produced lipopeptides by the agar diffusion method against E.coli, K. pneumoniae, S. aureus, Fusarium sp, Alternaria sp, and Phytophtora sp. The complete genome sequencing showed genes involved in the synthesis of multiple compounds identified as amphipathic cyclic lipopeptides such as locillomycin/locillomycin B/locillomycin C and bacillibactin. Our results highlighted significant lipopeptides properties displayed by V. massiliensis that can be exploited to develop a novel strategy in the formulation of natural biocidal and fungicidal agents.

Biosurfactant production by Bacillus cereus GX7 utilizing organic waste and its application in the remediation of hydrocarbon-contaminated environments.

The use of biosurfactants represents a promising technology for remediating hydrocarbon pollution in the environment. This study evaluated a highly effective biosurfactant strain-Bacillus cereus GX7's ability to produce biosurfactants from industrial and agriculture organic wastes. Bacillus cereus GX7 showed poor utilization capacity for oil soluble organic waste but effectively utilized of water- soluble organic wastes such as starch hydrolysate and wheat bran juice as carbon sources to enhance biosurfactant production. This led to significant improvements in surface tension and emulsification index. Corn steep liquor was also effective as a nitrogen source for Bacillus cereus GX7 in biosurfactant production. The biosurfactants produced by strain Bacillus cereus GX7 demonstrated a remediation effect on oily beach sand, but are slightly inferior to chemical surfactants. Inoculation with Bacillus cereus GX7 (70.36%) or its fermentation solution (94.38%) effectively enhanced the degradation efficiency of diesel oil in polluted seawater, surpassing that of indigenous degrading bacteria treatments (57.62%). Moreover, inoculation with Bacillus cereus GX7's fermentation solution notably improved the community structure by increasing the abundance of functional bacteria such as Pseudomonas and Stenotrophomonas in seawater. These findings suggest that the Bacillus cereus GX7 as a promising candidate for bioremediation of petroleum hydrocarbons.

Biodegradation and high-value utilization of waste cooking oil: Strategies and mechanisms for producing lipopeptide biosurfactants using Bacillus subtilis YZQ-2

This study explored the strategies and mechanisms of Bacillus subtilis YZQ-2 in producing lipopeptide biosurfactants using waste cooking oil (WCO) as a raw material. The optimal conditions achieved a WCO utilization rate of 75.88% and a biosurfactant yield of 0.30g/L at pH 6.0, 30°C, with 20g/L WCO and 5g/L yeast extract. GC-MS analysis of degradation products at different intervals elucidated the mechanism of WCO degradation. After 72hours of fermentation, a reduction in linoleic and palmitic acid levels indicated the completion of lipid hydrolysis and the continuation of β-oxidation. The biosurfactants, identified as lipopeptides (surfactin and fengycin), exhibited stability in alkaline environments (pH 7.0-11.0) and high-salt concentration (5-45g/L). Genomic and transcriptomic analyses of Bacillus subtilis YZQ-2 revealed genes associated with biosurfactant production, which were upregulated in the presence of WCO. The differential expression values (log2 fold change) were SrfAA 3.30, SrfAB 3.31, SrfAC 3.63, FenA 2.42, FenB 2.55, FenC 1.99, FenD 2.03 and FenE 2.29, respectively. The proposed biosynthesis pathway of lipopeptides begins with the hydrolysis of WCO by lipase into glycerol and fatty acids. The glycerol is then transformed into pyruvate through glycolysis, entering the Tricarboxylic Acid cycle. Additionally, pyruvate contributes to synthesizing amino acids and branched-chain fatty acids, which serve as precursors for lipopeptide synthesis. These findings underscore the potential of WCO as a sustainable feedstock for biosurfactant production.

Scaled-up production and recovery of lipopeptide biosurfactant and its application for washing petroleum-contaminated drill cuttings

A simple and efficient fermentation strategy using chitosan-immobilized Bacillus subtilis GY19 was developed for large-scale lipopeptide production from waste glycerol and palm oil. When a fed-batch fermentation approach was employed, excessive foaming was minimized, while lipopeptide production was greater than that of conventional batch fermentation. When a 700L stirred tank fermenter with a 400L working volume was used, a lipopeptide concentration and yield of 7.55g/L and 0.190g/g of substrate, respectively, were achieved. The pilot-scale recovery process involved sequential bacterial cell removal via centrifugation, elimination of impurities through acidification of the cell-free broth, and partial purification and concentration of the lipopeptides via ultrafiltration. A 5kDa stabilized cellulose-based membrane maintained a constant permeate flux and resulted in 67.2% lipopeptide recovery. The concentrated lipopeptide retentate contained 16.8g/L lipopeptides and a surface tension of 28.82 mN/m. A biobased washing agent for the treatment of petroleum-contaminated drill cuttings was later formulated with the retentate and various vegetable oil-based surfactants via the simplex−lattice mixture design methodology. The mixture of 1% retentate and 4% fatty alcohol ethoxylate 5EO presented the greatest removal efficiency of 83.2% for drill cuttings containing 15% (w/w) total petroleum hydrocarbons. The formulation also mobilized petroleum hydrocarbons into a distinct free oil layer, which would be easy to separate and subsequently recycle. These findings demonstrate the scalability of the lipopeptide production and recovery process, while the biobased washing agent offers an environmentally friendly approach for petroleum remediation.

Recent Innovations in Biosurfactant Production: Exploring Biomedical and Environmental Applications: A Review

The unique characteristics and ecological friendly nature of biosurfactants, which are compounds with amphiphilic properties derived from biological sources, have garnered considerable interest. This review article explores into the fascinating characteristics of biosurfactants, with a particular emphasis on identifying and studying microorganisms that produce biosurfactants in unusual conditions, such as harsh ecosystems and agricultural wastes. Using innovative techniques, researchers investigated a wide variety of microbial strains for their ability to produce biosurfactants and evaluated the biosurfactants that were recovered. Furthermore, researchers also conducted assays on a laboratory scale to explore their possible uses in fields including bioremediation and increased oil recovery. The effectiveness of biosurfactants in combating environmental problems and fostering sustainability is emphasized in this investigation. Additionally, researchers considered cost-effective techniques while evaluating the economic viability of biosurfactant production. These findings provide insight into strategies to effectively incorporate biosurfactants into new technologies for a range of applications. This study highlights the potential of biosurfactants as eco-friendly alternatives in industrial processes and enhances the awareness of their sources of production. The purpose is to explore a more sustainable future by integrating biosurfactants into widespread biomedical devices while supporting further research and advancement in the pharmaceutical industry.

Comparison of Antibacterial Activities of Six Bacillus amyloliquefaciens Strains

In this study, six bacterial strains were isolated from the sediment, probiotic fermentation products, and lake sediments, they were identified as Bacillus amyloliquefaciens using genetic evolution analysis, which were named B3, B4, B5, XD3, YF6, and YF8. The comparison of the antibacterial activity, hemolytic activity, and antibiotic sensitivity of six Bacillus amyloliquefaciens strains laid a foundation for the development and application of antimicrobial peptide products. A surface activity assay was used to determine the production of biosurfactants in six Bacillus amyloliquefaciens strains. With Staphylococcus aureus and Escherichia coli as indicator bacteria, their antibacterial activity was determined using the agar diffusion method; the same diffusion method was used to determine the antibiotic susceptibility of Bacillus amyloliquefaciens. The results showed that the six Bacillus amyloliquefaciens strains had obvious biosurface activity, and the bacteria inhibited Staphylococcus aureus and Escherichia coli, from strong to weak: YF8, XD3, B3, B4, YF6, and B5. Strain YF8 had the best broad-spectrum bacteriostatic effect, followed by strain XD3. All Bacillus amyloliquefaciens strains were susceptible to 16 common drugs, except for Bacillus amyloliquefaciens strain YF8, which was intermediate to neomycin. The study shows that Bacillus amyloliquefaciens and secondary metabolites have the ability to produce a variety of active peptides, exert a certain inhibitory effect on common pathogens, and have the potential to develop as animal probiotics.

Use of corncob and pineapple peel as associated substrates for biosurfactant production.

Biosurfactants are amphiphilic biomolecules with promising tensoative and emulsifying properties that find application in the most varied industrial sectors: environment, food, agriculture, petroleum, cosmetics, and hygiene. In the current work, a 23 full-factorial design was performed to evaluate the effect and interactions of pineapple peel and corncob as substrates for biosurfactant production by Bacillus subtilis LMA-ICF-PC 001. In a previous stage, an alkaline pretreatment was applied to corncob samples to extract the xylose-rich hydrolysate. The results indicated that pineapple peel extract and xylose-rich hydrolysate acted as partial glucose substitutes, minimizing production costs with exogenous substrates. Biosurfactant I (obtained at 8.11% pineapple peel extract, 8.11% xylose-rich hydrolysate from corncob, and 2.8109g/L glucose) exhibited a significant surface tension reduction (52.37%) and a promising bioremediation potential (87.36%). On the other hand, biosurfactant III (obtained at 8.11% pineapple peel extract, 31.89% xylose-rich hydrolysate from corncob, and 2.8109g/L glucose) exhibited the maximum emulsification index in engine oil (69.60%), the lowest critical micellar concentration (68mg/L), and the highest biosurfactant production (5.59g/L). These findings demonstrated that using pineapple peel extract and xylose-rich hydrolysate from corncob effectively supports biosurfactant synthesis by B. subtilis, reinforcing how agro-industrial wastes can substitute traditional carbon sources, contributing to cost reduction and environmental sustainability.

Harnessing microbial potential: Exploiting heavy oil-laden soil microbiota for sustainable production of high-yield rhamnolipids from waste cooking oil

Oil polluted soil microbiota plays an important role in the production of biosurfactants. In comparison to synthetic surfactants, biosurfactants offer unique advantages, such as lower toxicity, biodegradability, selectivity, and effectiveness under unpleasant conditions. Despite these benefits, the widespread use of biosurfactants is limited by enormous production costs. To address this challenge, this study aimed to explore the adoption of waste cooking for rhamnolipids production. Two prominent bacterial strains: Kosakonia cowanni and Acinetobacter colcoaceticus, were obtained from heavy oil-laden soil samples, and further demonstrated their capability for rhamnolipids production from waste cooking oil (Acinetobacter colcoaceticus: 0.51 g/L, Kosakonia cowanii: 0.39 g/L). The biosurfactants obtained were characterized through TLC, FTIR, and H NMR to confirm their rhamnolipid identities as mono-rhamnolipids. The findings in our study emphasizes the potential of cost-effective production of rhamnolipids that possess interesting biotechnological features through the synergy of oil-polluted environments and waste cooking oil. This study contributes significantly to the development of sustainable rhamnolipid production using non-pathogenic strains. By harnessing these microorganisms, we advance towards addressing critical environmental challenges, such as heavy metal contamination in water. This research aligns with broader sustainability goals, including clean water and sanitation.

Solubilization and enhanced degradation of benzene phenolic derivatives-Bisphenol A/Triclosan using a biosurfactant producing white rot fungus Hypocrea lixii S5 with plant growth promoting traits.

Endocrine disrupting chemicals (EDCs) as benzene phenolic derivatives being hydrophobic partition to organic matter in sludge/soil sediments and show slow degradation rate owing to poor bioavailability to microbes. In the present study, the potential of a versatile white rot fungal isolate S5 identified as Hypocrea lixii was monitored to degrade bisphenol A (BPA)/triclosan (TCS) under shake flask conditions with concomitant production of lipopeptide biosurfactant (BS) and plant growth promotion. Sufficient growth of WRF for 5 days before supplementation of 50 ppm EDC (BPA/TCS) in set B showed an increase in degradation rates by 23% and 29% with corresponding increase in secretion of lignin-modifying enzymes compared to set A wherein almost 84% and 97% inhibition in fungal growth was observed when BPA/TCS were added at time of fungal inoculation. Further in set B, EDC concentration stimulated expression of laccase and lignin peroxidase (Lip) with 24.44 U/L of laccase and 281.69 U/L of Lip in 100 ppm BPA and 344 U/L Lip in 50 ppm TCS supplemented medium compared to their respective controls (without EDC). Biodegradation was also found to be correlated with lowering of surface tension from 57.02 mN/m (uninoculated control) to 44.16 mN/m in case of BPA and 38.49 mN/m in TCS, indicative of biosurfactant (BS) production. FTIR, GC-MS, and LC-ESI/MSMS confirmed the presence of surfactin lipopeptide isoforms. The WRF also displayed positive plant growth promoting traits as production of ammonia, indole acetic acid, siderophores, Zn solubilization, and 1-1-aminocyclopropane-1-carboxylate (ACC) deaminase activity, reflecting its soil restoration ability. The combined traits of biosurfactant production, EDC degradation and plant growth promotion displayed by WRF will help in emulsifying the hydrophobic pollutants favoring their fast degradation along with restoration of contaminated soil in natural conditions.

Bacterial specialists playing crucial roles in maintaining system stability and governing microbial diversity in bioremediation of oil-polluted sediments under typical deep-sea condition

Ecologically, interactions and contributions of microbiota generalists and specialists remain largely unexplored in remediation of deep-sea oil pollution. Herein, ecological and evolutionary characteristics of the two taxa were comprehensively investigated in restoration of oil-polluted sediment at deep-sea microcosm. Niche-specialized taxa exhibited rapid speciation rate, more complex network structure and highly interspecific mutualism. In contrast, generalists possessed higher richness but with poor local performance, as evidenced by higher extinction rate, lower stability, and more interspecific antagonism. Generalists were the primary oil degraders, while specialists acted as auxiliaries promoting degradation via production of biofilm and biosurfactant. Evolutionarily, the continuous transition from specialists to generalists insured the exclusion of generalist at a relatively constant level for ecological trade-offs. Collectively, the findings emphasize the importance of specialists in facilitating oil degradation by elucidating their vital roles in maintaining system stability and regulating microbial diversity during process, and offer valuable guidance for designing remediation plans.