Plant Productivity Research Articles

Ornamental plants as vectors of pesticide exposure and potential threat to biodiversity and human health.

The production of conventional ornamental plants is pesticide-intensive. We investigated whether pesticide active ingredients (AIs) are still present in ornamentals at the time of purchase and assessed their potential ecotoxicity to non-target organisms. We purchased 1000 pot plants and 237 cut flowers of different species from garden centers in Austria and Germany between 2011 and 2021 and analyzed them for up to 646 AIs. Ecotoxicological risks of AIs were assessed by calculating toxic loads for honeybees (Apis mellifera), earthworms (Eisenia fetida), birds (Passer domesticus), and mammals (Rattus norvegicus) based on the LD50 values of the detected AIs. Human health risks of AIs were assessed on the basis of the hazard statements of the Globally Harmonized System. Over the years, a total of 202 AIs were detected in pot plants and 128 AIs in cut flowers. Pesticide residues were found in 94% of pot plants and 97% of cut flowers, with cut flowers containing about twice as many AIs (11.0 ± 6.2 AIs) as pot plants (5.8 ± 4.0 AIs). Fungicides and insecticides were found most frequently. The ecotoxicity assessment showed that 47% of the AIs in pot plants and 63% of the AIs in cut flowers were moderately toxic to the considered non-target organisms. AIs found were mainly toxic to honeybees; their toxicity to earthworms, birds, and mammals was about 105 times lower. Remarkably, 39% of the plants labeled as "bee-friendly" contained AIs that were toxic to bees. More than 40% of pot plants and 72% of cut flowers contained AIs classified as harmful to human health. These results suggest that ornamental plants are vectors for potential pesticide exposure of consumers and non-target organisms in home gardens.

The use of bioremediation as a technique to treat oil-contaminated effluents

Demographic growth has increased the demand for natural resources, especially in oil exploration, which, despite its benefits, has negative environmental and social impacts. The occurrence of environmental accidents, such as oil spills, highlights the need for effective remediation methods. Bioremediation, using microorganisms or plant products, has emerged as a promising technique for treating contaminated effluents. This study analyzes the effectiveness of the main bioremediation techniques, highlighting advantages such as low cost, easy implementation and sustainability compared to other remediation techniques, being sustainable, not causing disruption to ecosystems and aiming exclusively at the biodegradation of petroleum polluting compounds.

Medicinal cannabis tea contains variable doses of cannabinoids and no terpenes.

Tea is a recommended way of administration of prescribed cannabis plant products in Denmark. We aimed to investigate the cannabinoid and terpene doses contained in different teas. We analysed tetrahydrocannabinol (THC), tetrahydrocannabinolic acid (THCA), cannabidiol (CBD), cannabidiolic acid (CBDA), and terpene concentrations in three repeated preparations of each type of tea, and in plant material. In standard tea, concentrations of THC were [median (min-max)] 9.5 (2.3-15), 19 (13-34), and 36 (26-57) μg/mL for products with a labelled content of 6.3%, 14%, and 22% total THC (THC + THCA), respectively. The CBD concentration in tea from a product labelled with 8% total CBD (CBD + CBDA) was 7.5 (1.9-10) μg/mL. Based on this, the recommended starting amount of 0.2L of the different teas would contain between 0.46 and 11.3mg THC, and 0.38 to 2.0mg CBD. Adding creamer before, but not after boiling, increased the THC and CBD concentration 2.3-4.4 and 2.1-fold, respectively. Terpenes were detected in plant material, but not in tea. The study elucidates THC and CBD doses in different teas, which may assist the clinician's choice of cannabis product. Moreover, it underscores the need for caution as administration as tea can result in exposure to different doses, even when the same cannabis product is used.

Chloroplast NADH dehydrogenase-like complex-mediated cyclic electron flow is the main electron transport route in C4 bundle sheath cells.

The superior productivity of C4 plants is achieved via a metabolic C4 cycle which acts as a CO2 pump across mesophyll and bundle sheath (BS) cells and requires an additional input of energy in the form of ATP. The importance of chloroplast NADH dehydrogenase-like complex (NDH) operating cyclic electron flow (CEF) around Photosystem I (PSI) for C4 photosynthesis has been shown in reverse genetics studies but the contribution of CEF and NDH to cell-level electron fluxes remained unknown. We have created gene-edited Setaria viridis with null ndhO alleles lacking functional NDH and developed methods for quantification of electron flow through NDH in BS and mesophyll cells. We show that CEF accounts for 84% of electrons reducing PSI in BS cells and most of those electrons are delivered through NDH while the contribution of the complex to electron transport in mesophyll cells is minimal. A decreased leaf CO2 assimilation rate and growth of plants lacking NDH cannot be rescued by supplying additional CO2. Our results indicate that NDH-mediated CEF is the primary electron transport route in BS chloroplasts highlighting the essential role of NDH in generating ATP required for CO2 fixation by the C3 cycle in BS cells.

Low-carbon optimal dispatch strategy of power systems considering the combined operation of oxy-fuel combustion and electric hydrogen production

ABSTRACT Oxy-fuel combustion technology offers a promising solution for achieving nearly zero carbon dioxide emissions from coal-fired units, presenting a viable path toward low-carbon dispatch. This study establishes a simulation model for the low-carbon operation of power systems, focusing on the integrated operation of an oxy-fuel combustion plant and electric hydrogen production. By incorporating oxygen generated from electric hydrogen production into the oxy-fuel combustion plant, the primary objective is to minimize system operation costs. Through simulation analysis and verification, a comparative scenario is constructed to evaluate performance. The simulation results indicate that the joint operation approach yields significant benefits. In comparison to separate operation, the joint operation strategy leads to a reduction of approximately 7.38% in total system costs, 18.79% in operating costs, and 23.56% in carbon emissions. This integrated approach not only achieves lower carbon emissions but also results in reduced overall system costs.

Influence of Different Methods of Application of Lignogumate on the Product Quality of Green Crops and Medicinal Plants

The effectiveness of the use of lignohumate on lettuce (annual, green crop) and peppermint (perennial, medicinal plant) grown under the conditions of vegetation experiments was studied. The combination of lignohumate with the introduction of chelated fertilizers containing trace elements (zinc, copper) into peat showed a significant positive effect in obtaining high-quality plant products. The most effective was the fertilizer system, which included a combination of lignohumate with chelated forms of zinc and copper: the increase in lettuce biomass was 29–32, mint – 71–79%, the content of macroand microelements in plants became optimal.

Mercury Discharge Inventory Based on Sewage Treatment Process in China

Mercury pollution is a serious public health problem. China’s extensive use and reliance on mercury has led to water pollution, particularly the presence of methylmercury in water. Estimating total mercury emissions from wastewater in China is challenging due to the large amount and wide range of emissions. An estimation model for total mercury content in sewage in China was established by establishing a relationship between sewage treatment volume, mercury content in effluent after sewage treatment, and the data of sludge production and mercury content in the sewage treatment plant. It was determined that only 3% of mercury entered the air during sewage treatment, 27.5% of mercury entered the effluent, and about 69.5% of mercury entered the sludge, based on the treatment of existing wastewater treatment plants in China. From 2002 to 2021, the average annual sewage mercury emission in China was 32.07 Mg, and the emissions were higher in densely populated and economically developed provinces such as Beijing, Shandong, Hebei, and Guangdong. By 2025, China’s mercury emissions are projected to reach 55.41 Mg. By 2035, China’s mercury emissions are projected to reach 49.3 Mg.

6-BA Reduced Yield Loss under Waterlogging Stress by Regulating the Phenylpropanoid Pathway in Wheat

Waterlogging stress causes substantial destruction to plant growth and production under climatic fluctuations globally. Plants hormones have been widely explored in numerous crops, displaying an imperative role in crop defense and growth mechanism. However, there is a paucity of research on the subject of plant hormones regulating waterlogging stress responses in wheat crop. In this study, we clarified the role of 6-BA in waterlogging stress through inducing phenylpropanoid biosynthesis in wheat. The application of 6-BA (6-benzyladenine) enhanced the growth and development of wheat plants under waterlogging stress, which was accompanied by reduced electrolyte leakage, high chlorophyll, and soluble sugar content. ROS scavenging was also enhanced by 6-BA, resulting in reduced MDA and H2O2 accumulation and amplified antioxidant enzyme activities. Additionally, under the effect of 6-BA, the acceleration of lignin content and accumulation in the cell walls of wheat tissues, along with the activation of PAL (phenylalanine ammonia lyase), TAL (tyrosine ammonia lyase), and 4CL (4-hydroxycinnamate CoA ligase) activities and the increase in the level of transcription of the TaPAL and Ta4CL genes, were observed under waterlogging stress. Also, 6-BA improved the root growth system under waterlogging stress conditions. Further qPCR analysis revealed increased auxin signaling (TaPR1) in 6-BA-treated plants under waterlogging stress that was consistent with the induction of endogenous IAA hormone content under waterlogging stress conditions. Here, 6-BA also reduced yield loss, as compared to control plants. Thus, the obtained data suggested that, under the application of 6-BA, phenylpropanoid metabolism (i.e., lignin) was stimulated, playing a significant role in reducing the negative effects of waterlogging stress on yield, as evinced by the improved plant growth parameters.

Approaching Environmental Sustainability through Energy Optimization in Polyisoprene Production

The global energy crisis, forced by fossil fuel shortages and supply chain disruption, stimulates EU policymakers to find alternative energy replacement. Modifying the present polyisoprene footwear production plant into a hybrid system by combining different energy sources raises energy efficiency. The proposed hybrid system incorporates classical and solar-based technology, resulting in energy optimization by utilizing waste heat recovery. By installing an economizer for feeding water preheating using flue gas recovery, it results in the volume of the flue gases lowering from to , or by 11.13%, while the flue gases’ temperature is lowered from 204 °C (477.15 K) to 50.99 °C (324.14 K). Further improvement in combining feed water and air preheating results in natural gas savings of 12.05%, while the flue gases’ exhaust temperature is decreased to 30.44 °C (303.59 K). The third option, using condensate heat recovery and feeding water preheating using flue gases, showed natural gas savings as much as 17.41% and exhaust flue gases cooling to 112.49 °C (385.64 K). The combination of condensate heat recovery, combustion air and feed water preheating results in the volume of the flue gases being lowered by 20.42% and natural gas savings by 20.24%, while the flue gases’ temperature is reduced to 45.11 °C (318.26K). The proposed solar application in polyisoprene production predicts the hybrid system showing fuel savings ranging from 77.96% to 87.08% in comparison to the basic process. The greatest fuel savings of 87.08% is shown in a solarized polyisoprene footwear production plant with combustion air and feed water preheating combined with the condensate return system. Integrating the solar heat into the regular industrial process of polyisoprene production showed great potential and showed environmental sustainability through energy optimization in polyisoprene production

Snow drifts as a driver of alpine plant productivity as observed from weekly multispectral drone imagery

Snow drifts as a driver of alpine plant productivity as observed from weekly multispectral drone imagery

Development and Characterization of Hybrid Burgers Made from Pork and Multi-Ingredient Plant Mixtures and Protected with Lactic Acid Bacteria

Hybrid (meat–plant) products can be a sustainable response to the increased interest in flexitarianism. Their development requires designing appropriate composition and functional properties and ensuring microbiological safety. This study aimed to determine the influence of using various multi-ingredient plant mixtures and pork in different proportions and two recipe variants on the characteristics of baked burgers. Additionally, the impact of lactic acid bacteria (LAB) application on the microbiological quality of raw hybrid/plant burgers was assessed. All products were analyzed in terms of basic chemical composition (NIR spectroscopy) and physicochemical and textural properties (instrumental methods). The raw plant and hybrid burgers met the microbiological requirements. The baked burgers did not significantly differ in terms of their chemical composition, except for the fiber found in plant/hybrid samples. Moreover, the reformulation of burgers had no effect on their cooking yield or water activity. As the content of plant parts increased, the baked burgers were darker (lower L*) and had a more tender texture (lower shear force and penetration force). Overall, the multi-ingredient plant mixtures showed great potential in the development of high-quality hybrid burgers. However, the texture formed can, importantly, determine final consumer acceptance. Therefore, research should be continued, especially in terms of comprehensive textural and sensory analyses.

Magnesium-doped biochars increase soil phosphorus availability by regulating phosphorus retention, microbial solubilization and mineralization

Despite fertilization efforts, phosphorus (P) availability in soils remains a major constraint to global plant productivity. Soil incorporation of biochar could promote soil P availability but its effects remain uncertain. To attain further improvements in soil P availability with biochar, we developed, characterized, and evaluated magnesium-oxide (MgO) and sepiolite (Mg4Si6O15(OH)2·6H2O)-functionalized biochars with optimized P retention/release capacity. Field-based application of these biochars for improving P availability and their mechanisms during three growth stages of maize was investigated. We further leveraged next-generation sequencing to unravel their impacts on the plant growth-stage shifts in soil functional genes regulating P availability. Results showed insignificant variation in P availability between single super phosphate fertilization (F) and its combination with raw biochar (BF). However, the occurrence of Mg-bound minerals on the optimized biochars’ surface adjusted its surface charges and properties and improved the retention and slow release of inorganic P. Compared to BF, available P (AP) was 26.5% and 19.1% higher during the 12-leaf stage and blister stage, respectively, under MgO-optimized biochar + F treatment (MgOBF), and 15.5% higher under sepiolite-biochar + F (SBF) during maize physiological maturity. Cumulatively, AP was 15.6% and 13.2% higher in MgOBF and SBF relative to BF. Hence, plant biomass, grain yield, and P uptake were highest in MgOBF and SBF, respectively at harvest. Optimized-biochar amendment stimulated microbial 16SrRNA gene diversity and suppressed the expression of P starvation response and P uptake and transport-related genes while stimulating P solubilization and mineralization genes. Thus, the optimized biochars promoted P availability via the combined processes of slow-release of retained phosphates, while inducing the microbial solubilization and mineralization of inorganic and organic P, respectively. Our study advances strategies for reducing cropland P limitation and reveals the potential of optimized biochars for improving P availability on the field scale.Graphical

Ferroptosis: Latest evidence and perspectives on plant-derived natural active compounds mitigating doxorubicin-induced cardiotoxicity.

Doxorubicin (DOX) is a chemotherapy drug widely used in clinical settings, acting as a first-line treatment for various malignant tumors. However, its use is greatly limited by the cardiotoxicity it induces, including doxorubicin-induced cardiomyopathy (DIC). The mechanisms behind DIC are not fully understood, but its potential biological mechanisms are thought to include oxidative stress, inflammation, energy metabolism disorders, mitochondrial damage, autophagy, apoptosis, and ferroptosis. Recent studies have shown that cardiac injury induced by DOX is closely related to ferroptosis. Due to their high efficacy, availability, and low side effects, natural medicine treatments hold strong clinical potential. Currently, natural medicines have been shown to mitigate DOX-induced ferroptosis and ease DIC through various functions such as antioxidation, iron ion homeostasis correction, lipid metabolism regulation, and mitochondrial function improvement. Therefore, this review summarizes the mechanisms of ferroptosis in DIC and the regulation by natural plant products, with the expectation of providing a reference for future research and development of inhibitors targeting ferroptosis in DIC. This review explores the mechanisms of ferroptosis in doxorubicin-induced cardiomyopathy (DIC) and summarizes how natural plant products can alleviate DIC by inhibiting ferroptosis through reducing oxidative stress, correcting iron ion homeostasis, regulating lipid metabolism, and improving mitochondrial function.

Plant species richness and legume presence increase microbial necromass carbon accumulation

Biodiversity control experiments have demonstrated that higher plant species richness increases plant production and soil organic carbon (SOC) stocks. However, although microbial necromass C constitutes a substantial and stable component of SOC, the effect of species richness on microbial necromass C accumulation remains unclear, especially concerning the presence or absence of legumes. We conducted an 8-year grassland biodiversity experiment to investigate how changes in plant diversity, with or without legumes, affect microbial necromass C and its proportion in SOC. Aboveground and root biomass increased by 254 % and 195 %, respectively, from monoculture plots to those with twelve species. SOC, total nitrogen (N), and microbial biomass C (MBC) all increased with plant species richness, independent of legume presence. The presence of legumes further increased the SOC, total N, MBC, and inorganic N compared to plots without legumes. Microbial necromass C increased by 48.3 % in twelve-species mixtures compared to monocultures; however, the ratio of microbial necromass C to SOC remained stable with increasing species diversity. Notably, the presence of legumes increased both the accumulation of microbial necromass C and its proportion in SOC compared to the absence of legumes at both high and low species diversity levels. This greater accumulation was primarily driven by increased plant productivity and microbial biomass, induced by legume-associated nitrogen fixation. Our findings highlight significant implications for ecosystem management: maintaining high levels of plant species diversity, particularly in conjunction with legumes, can increase microbial necromass C and enhance soil C sequestration.

Comprehensive analysis on investigating water-saving potentials of irrigated cotton in semi-arid area in China

Deficit irrigation is a common strategy to reduce water use and improve the sustainability of cotton production. However, the effects of water deficits on crop productivity and quality are subject to genotype by management by environmental interactions. This study investigated effects of water deficits and frequency of irrigation on cotton performance grown in semi-arid region, Xinjiang, the main cotton-growing area in China. Two field trials (2020 and 2021) with split experimental design, including main factors of three irrigation levels (moderate-deficit, mild-deficit and full-irrigation) and split factors of three irrigation frequencies (4, 8 and 12 days) were conducted. Results from two trials both showed little negative influence of irrigation levels on yield, and higher irrigation frequency improved yield under same irrigation level. Significant effects of irrigation levels on yield components were found in 2021, with a 22 % increase in boll number and an 18 % reduction in boll weight under moderate-deficit irrigation compared with those under full-irrigation. Interactions between irrigation levels and frequencies significantly affected harvest index (HI), showing that reduced irrigation might be beneficial for improving HI. However, decreased fibre length while increased fibre micronaire were found under deficit irrigation. A strong association between radiation use efficiency (RUE) and boll growth rate was observed, suggesting that RUE might be the driving force of yield formation. A tight correlation between both biomass and transpiration efficiency versus delta temperature between air and canopy (ΔTair-canopy) was observed, suggesting ΔTair-canopy could be used as an efficient tool to assess plant production under deficit irrigation. This study provided an improved understanding of the physiological basis of cotton yield formation and further identified a high-throughput and instantaneous method to monitor effects of deficit irrigation on crop productivity.

Performability analysis for the SPVC line system of leaf spring production plant using probabilistic approach

PurposeThis work ensures the higher performability of this complex system, which consists of five different subsystems, i.e. shearing machine, V-cutting machine, center hole punch, edge cutting burr and drilling machine. These subsystems are placed in combinations of both series and parallel arrangement. The concerned plant management must be aware of the failures that have the greatest/least impact on the system’s performance.Design/methodology/approachPerformability analysis has been done for the Shearing, Punch and V- Cutting (SPVC) line system by using a probabilistic approach (i.e. Markov method). This system was further divided into five subsystems, and single-order differential equations are derived using the transition diagram. MATLAB software was used to determine the performability of the system for various combinations of repair and failure rates.FindingsIn this research work, performability analysis was done using different combinations of repair and failure rates for these subsystems. Further, a decision matrix (DM) has been developed that indicates that edge cutting burr is the most critical subsystem, which requires the top level of maintenance priorities among the various subsystems. This matrix will facilitate policymaking related to various maintenance activities for the respective system.Originality/valueIn this research work, a mathematical modeling based on a single differential equation using a transition diagram has been developed for the SPVC line system. The novelty of this work is to consider interaction among different subsystem, which generates more realistic situation during modeling. The purposed DM helps make future maintenance planning, which reduces maintenance costs and enhances system's performability.

Digital Twin concept and architecture for fleets of hydrogen electrolysers

The expected increase in green hydrogen demand in the near future necessitates scaling-up the hydrogen production plants with the goal of reducing the hydrogen production costs. Nevertheless, a quick scale-up limits the time to test new designs, optimize operation schedules and build up knowledge for production parameters. The Digital Twin concept applied on a fleet of electrolysers is proposed as a digitization tool to contribute to this scale-up process by providing a comprehensive view of the entire electrolysers fleet as well as constructing the feedback connection to the electrolysers manufacturing process. Such Fleet Digital Twin approach can improve the efficiency and scalability of green hydrogen production using water electrolysis. This paper presents a concept of a Fleet Digital Twin and discusses its architecture requirements and design. By applying the Digital Twin concept at different levels of the system, fleet knowledge services are enabled by leveraging the availability of fleet-wide data. The proposed architecture design provides a solid foundation for future development and implementation of Fleet Digital Twins in industrial applications.

SPATIAL DISTRIBUTION OF PHOMA LEAF SPOT OF COFFEE AND RELATIONSHIP WITH ENVIRONMENTAL AND HOST VARIABLES

The objective of this study was to evaluate the spatial distribution of Phoma leaf spot of coffee and its relationship with the environmental variables altitude, soil texture, and mineral nutrients. In addition, the relationship between disease and foliar nutrients, leafing, and plant production was evaluated. The study was carried out in a 7.65 ha coffee plantation for two years. A total of 86 points were georeferenced in this area. The incidence and severity of the disease were assessed monthly, and the data were transformed into annual values of “Area Under the Incidence Progress Curve” (AUIPC) and “Area Under the Severity Progress Curve” (AUSPC) of the disease. Likewise, the monthly data for the leafing were transformed into annual values of “Area Under the Leafing Progress Curve” (AULPC). Environmental and host variables significantly correlated with the AUIPC were subjected to geostatistical modeling. Higher AUIPC and AUSPC were observed in the second year of the study. The altitude, P-rem and Ca present in the soil, as well as the P and N present in the leaves, showed a positive correlation with the AUIPC. The K, Cu, and Mn present in the leaves, the AULPC and the production were negatively correlated with this variable. The exponential semivariogram model was the most appropriate to model the spatial autocorrelation of the variables analyzed, except for altitude.

Multi-Omics Analysis Reveals the Transcriptional Regulatory Network of Maize Roots in Response to Nitrogen Availability

Nitrogen (N) availability determines higher plant productivity and yield. However, the molecular mechanisms governing N acquisition and utilization remain largely unknown in maize. In this study, ATAC-seq, RNA-seq, and Ribo-seq analyses were conducted in maize roots under different N supply conditions. A set of differentially expressed genes enriched in N and phenylpropanoid metabolisms at both the transcription and translation levels were highlighted. Interestingly, less than half of low-N responsive genes were shared between transcription and translation. The alteration of translational efficiency (TE) is also an important mechanism by which maize responds to LN. In addition, we identified low-N-induced open chromatin regions (OCRs) and observed an enrichment of transcription factor (TF) binding motifs. Furthermore, we constructed a transcriptional regulatory network for maize roots subjected to low-N. These findings extend our understanding of N availability response and provide new insights for improving N use efficiency (NUE).

Fusarium solani associated with Cedrela odorata and Swietenia macrophylla and their sensitivity to conventional fungicides

Background / Objective. In the state of Yucatan, Mexico, 10 million forest plants were produced in the last five years for various conservation and restoration actions. The main limitations in the production of these plants in nursery are disease induced by the genus Fusarium spp., that cause stem and root rots and plant production losses of up to 50%. The objective of the work was to identify the causal agent associated with stem and root rot and necrosis of cedar (Cedrela odorata) and mahogany (Swietenia macrophylla) and their in vitro sensitivity to conventional fungicides. Materials and Methods. C. odorata and S. macrophylla plants were collected at three and six weeks of germination, respectively, with symptoms of necrosis and rot indicated; from where five fungal isolates were obtained and morphologically and molecularly identified. The Minimum Inhibitory Concentration (MIC) of spores and the Minimum Lethal Concentration (MLC) of six conventional fungicides of recurrent application in the region (Prochloraz, Carbendazim, Benomyl, Fosetyl Al, Captan and Mancozeb) were determined in vitro by the microdilution method and validate their effectiveness and viability in the management of this problematic. Results. The morphology and molecular sequences of the isolates were similar to the reported for Fusarium solani. The MIC of F. solani spores for Prochloraz, Carbendazim, Benomyl, Captan and Mancozeb were 2.44. 11.38, 14.06, 7.81 and 7.81 ppm, respectively; Fosetyl Al, did not inhibit spore germination normal mycelial growth of the fungus was observed at the concentration evaluated. Conclusion. Prochloraz and Mancozeb had the lowest MLC with 2.44 and 7.81 ppm, respectively.