Magnetic Force Microscopy Probe Research Articles

Magnetic imaging of individual magnetosome chains in magnetotactic bacteria

While significant advances have been made in exploring and uncovering the promising potential of biomagnetic materials, persistent challenges remain on various fronts, notably in the characterization of individual elements. This study makes use of advanced modes of Magnetic Force Microscopy (MFM) and tailored MFM probes to characterize individual magnetotactic bacteria in different environments. The characterization of these elements posed a significant challenge, as the magnetosomes, besides presenting low magnetic signal, are embedded in bacteria of much larger size. To overcome this, customed Atomic Force Microscopy probes are developed through various strategies, enhancing sensitivity in different environments, including liquids. Furthermore, employing MFM imaging under an in-situ magnetic field provides an opportunity to gather quantitative data regarding the critical fields of these individual chains of nanoparticles. This approach marks a substantial advancement in the field of MFM for biological applications, enabling the detection of magnetosomes under different conditions.

Magnetic Domains and Their Power Spectral Densities in Non-Oriented Electrical Steel after Thermal Compression at Different Rates.

The magnetic domains of non-oriented electrical steel bearing cumulative thermal compressions made by a Gleeble 3500 Thermal System were observed using an atomic force microscope (AFM). The component forces, comprising the magnetic forces between the AFM probe and magnetic domains of the samples, along the freedom direction of the probe, were measured, and they formed the value fluctuation of the magnetic domains. The fluctuations of the magnetic domains were analyzed by examining the power spectral density (PSD) curves. The hysteresis curves of the samples were measured using a highly sensitive magnetic measurement system. An analysis of the magnetic force microscope (MFM) maps suggested that some magnetic domains were compressed into crushed and fragmented shapes, similar to the microstructure of deformed grains. Meanwhile, some were reconstructed within the thermal compressions, like dynamic recrystallization microstructures. Meaningfully, the MFM probe moved and deformed the proximal magnetic domains of tested samples within the region of its weak magnetic field. The peak positions of the magnetic domains with a high deformation rate were shifted and moved during the measuring processes by the weakly polarized probe. Both windward and leeward sides simultaneously expressed a slope towards each co-adjacent valley in the MFM maps and induced a statistical throbbing within a narrow band in the PSD curves. Thus, the MFM scanning mode was also analyzed and improved to obtain accurate MFM maps with low disturbances from the weak magnetic field of the probe. Swapping the order positions of the middle processes in the MFM scanning and adding a gliding step between them could offset the peak skewing of magnetic domains caused by the weakly polarized probe during MFM measurement process without incurring excessive replacement costs. Accumulative compression at a high rate (10 s-1) would crush magnetic domains into irregularly decreasing sizes with messy boundaries. This investigation provides an example of the complete relationships among deformations, magnetic domains, and magnetic properties.

Numerical Characterization of Magnetic Vortex Probe Imaging for Magnetic Force Microscopy

We study theoretically the performance and limitations of the magnetic vortex probe for magnetic force microscopy (MFM). In the ideal case, the only magnetically active part of the probe is the magnetic vortex core (VC) existing in the center of a Permalloy (Py) disk located at the apex of a non-magnetic tip. Such VC can be effectively characterized as a point dipole with the magnetic moment of the order of 10 <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">-17</sup> Am <sup xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">2</sup> embedded about 20 nm inside the disk, which is similar to the commercial low-momentum MFM probes. In addition to the standard probes, the ideal VC probe offers high durability and a well-controlled magnetic moment suitable for quantitative MFM. However, since the VC probe is made of magnetically soft material its magnetization profile and the resulting MFM image can be deformed by the stray field of the sample. Therefore, the VC probe is suited for imaging the samples with small domain sizes which generate low stray fields. We numerically examine VC imaging of typical magnetic samples, i.e. domain arranged as a single circular dot, stripe patterns, and the chessboard. We determine the limiting dimensions of the domains that can be correctly imaged by the VC tip of optimal parameters. In general, we can conclude that MFM imaging by VC probes gives reasonable results for the samples with domains with lateral dimensions up to 100 nm.

Accurate determination of MFM tip’s magnetic parameters on nanoparticles by decoupling the influence of electrostatic force

Magnetic force microscopy (MFM) has become one of the most important instruments for characterizing magnetic materials with nanoscale spatial resolution. When analyzing magnetic particles by MFM, calibration of the magnetic tips using reference magnetic nanoparticles is a prerequisite due to similar orientation and dimension of the yielded magnetic fields. However, in such a calibration process, errors caused by extra electrostatic interactions will significantly affect the output results. In this work, we evaluate the magnetic moment and dipole radius of the MFM tip on Fe3O4 nanoparticles by considering the associated electrostatic force. The coupling of electrostatic contribution on the measured MFM phase is eliminated by combining MFM and Kelvin probe force microscopy together with theoretical modeling. Numerical simulations and experiments on nickel nanoparticles demonstrate the effectiveness of decoupling. Results show that the calibrated MFM tip can enable a more accurate analysis of micro-and-nano magnetism. In addition, a fast and easy calibration method by using bimodal MFM is discussed, in which the acquisition of multiple phase shifts at different lift heights is not required.

Visualizing Atomically Layered Magnetism in CrSBr.

2D materials can host long-range magnetic order in the presence of underlying magnetic anisotropy. The ability to realize the full potential of 2D magnets necessitates systematic investigation of the role of individual atomic layers and nanoscale inhomogeneity (i.e., strain) on the emergence of stable magnetic phases. Here, spatially dependent magnetism in few-layer CrSBr is revealed using magnetic force microscopy (MFM) and Monte Carlo-based simulations. Nanoscale visualization of the magnetic sheet susceptibility is extracted from MFM data and force-distance curves, revealing a characteristic onset of both intra- and interlayer magnetic correlations as a function of temperature and layer-thickness. These results demonstrate that the presence of a single uncompensated layer in odd-layer terraces significantly reduces the stability of the low-temperature antiferromagnetic (AFM) phase and gives rise to multiple coexisting magnetic ground states at temperatures close to the bulk Néel temperature (TN ). Furthermore, the AFM phase can be reliably suppressed using modest fields (≈16 mT) from the MFM probe, behaving as a nanoscale magnetic switch. This prototypical study of few-layer CrSBr demonstrates the critical role of layer parity on field-tunable 2D magnetism and validates MFM for use in nanomagnetometry of 2D materials (despite the ubiquitous absence of bulk zero-field magnetism in magnetized sheets).

Creating and detecting a magnetic bimeron by magnetic force microscope probe

A magnetic bimeron is a version of skyrmion, which is predicted for the in-plane magnetized thin films with interfacial Dzyaloshinskii-Moriya interaction. Here we theoretically investigate the possibility to create individual bimeron using stray field of magnetic force microscope (MFM) tip. We demonstrate that a local magnetization reversal of the film by localized MFM field in combination with an additional uniform perpendicular magnetic field enables the stable bimeron formation. The possibilities for detection of the bimeron by the methods of magnetic force microscopy, Lorentz transmission electron microscopy and magnetic resonance force spectroscopy are discussed.

Magnetic Force Microscopy on Nanofibers—Limits and Possible Approaches for Randomly Oriented Nanofiber Mats

Magnetic force microscopy (MFM) belongs to the methods that enable spatially resolved magnetization measurements on common thin-film samples or magnetic nanostructures. The lateral resolution can be much higher than in Kerr microscopy, another spatially resolved magnetization imaging technique, but since MFM commonly necessitates positioning a cantilever tip typically within a few nanometers from the surface, it is often more complicated than other techniques. Here, we investigate the progresses in MFM on magnetic nanofibers that can be found in the literature during the last years. While MFM measurements on magnetic nanodots or thin-film samples can often be found in the scientific literature, reports on magnetic force microscopy on single nanofibers or chaotic nanofiber mats are scarce. The aim of this review is to show which MFM investigations can be conducted on magnetic nanofibers, where the recent borders are, and which ideas can be transferred from MFM on other rough surfaces towards nanofiber mats.

Magnetic Direct-Write Skyrmion Nanolithography.

Magnetic skyrmions are stable spin textures with quasi-particle behavior and attract significant interest in fundamental and applied physics. The metastability of magnetic skyrmions at zero magnetic field is particularly important to enable, for instance, a skyrmion racetrack memory. Here, the results of the nucleation of stable skyrmions and formation of ordered skyrmion lattices by magnetic force microscopy in (Pt/CoFeSiB/W)n multilayers, exploiting the additive effect of the interfacial Dzyaloshinskii-Moriya interaction, are presented. The appropriate conditions under which skyrmion lattices are confined with a dense two-dimensional liquid phase are identified. A crucial parameter to control the skyrmion lattice characteristics and the number of scans resulting in the complete formation of a skyrmion lattice is the distance between two adjacent scanning lines of a magnetic force microscopy probe. The creation of skyrmion patterns with complex geometry is demonstrated, and the physical mechanism of direct magnetic writing of skyrmions is comprehended by micromagnetic simulations. This study shows a potential of a direct-write (maskless) skyrmion (topological) nanolithography with sub-100 nm resolution, where each skyrmion acts as a pixel in the final topological image.

Half-hedgehog spin textures in sub-100 nm soft magnetic nanodots.

Topologically non-trivial structures such as magnetic skyrmions are nanometric spin textures of outstanding potential for spintronic applications due to their unique features. It is well known that Néel skyrmions of definite chirality are stabilized by the Dzyaloshinskii-Moriya exchange interaction (DMI) in bulk non-centrosymmetric materials or ultrathin films with strong spin-orbit coupling at the interface. In this work, we show that soft magnetic (permalloy) hemispherical nanodots are able to host three-dimensional chiral structures (half-hedgehog spin textures) with non-zero tropological charge. They are observed at room temperature, in absence of DMI interaction and they can be further stabilized by the magnetic field arising from the Magnetic Force Microscopy probe. Micromagnetic simulations corroborate the experimental data. Our work implies the existence of a new degree of freedom to create and manipulate complex 3D spin-textures in soft magnetic nanodots and opens up future possibilities to explore their magnetization dynamics.

Customized MFM probes based on magnetic nanorods.

Focused Electron Beam Induced Deposition (FEBID) for magnetic tip fabrication is presented in this work as an alternative to conventional sputtering-based Magnetic Force Microscopy (MFM) tips. FEBID enables the growth of a high-aspect-ratio magnetic nanorod with customized geometry and composition to overcome the key technical limitations of MFM probes currently on the market. The biggest advantage of these tips, in comparison with CoCr coated pyramidal probes, lies in the capability of creating sharp ends, nearly 10 nm in diameter, which provides remarkable (topographic and magnetic) lateral resolution in samples with magnetic features close to the resolution limits of the MFM technique itself. The shape of the nanorods produces a very confined magnetic stray field, whose interaction with the sample is extremely localized and perpendicular to the surface, with negligible in-plane components. This effect can lead to a better analytical and numerical modelling of the MFM probes and to an increase in the sensitivity without perturbing the magnetic configuration of soft samples. Besides, the high-aspect ratio achievable in FEBID nanorod tips makes them magnetically harder than the commercial ones, reaching coercive fields higher than 900 Oe. According to the results shown, tips based on magnetic nanorods grown by FEBID can be eventually used for quantitative analysis in MFM measurements. Moreover, the customized growth of Co- or Fe-based tips onto levers with different mechanical properties allows MFM studies that demand different measuring conditions. To showcase the versatility of this type of probe, as a last step, MFM is performed in a liquid environment, which still remains a challenge for the MFM community largely due to the lack of appropriate probes on the market. This opens up new possibilities in the investigation of magnetic biological samples.

Individual skyrmion manipulation by local magnetic field gradients

Magnetic skyrmions are topologically protected spin textures, stabilised in systems with strong Dzyaloshinskii-Moriya interaction (DMI). Several studies have shown that electrical currents can move skyrmions efficiently through spin-orbit torques. While promising for technological applications, current-driven skyrmion motion is intrinsically collective and accompanied by undesired heating effects. Here we demonstrate a new approach to control individual skyrmion positions precisely, which relies on the magnetic interaction between sample and a magnetic force microscopy (MFM) probe. We investigate perpendicularly magnetised X/CoFeB/MgO multilayers, where for X = W or Pt the DMI is sufficiently strong to allow for skyrmion nucleation in an applied field. We show that these skyrmions can be manipulated individually through the local field gradient generated by the scanning MFM probe with an unprecedented level of accuracy. Furthermore, we show that the probe stray field can assist skyrmion nucleation. Our proof-of-concepts results pave the way towards achieving current-free skyrmion control.

Impact of the Field of a Magnetic Force Microscope Probe on the Skyrmion State in a Modified Co/Pt Film with Perpendicular Anisotropy

We present the results of experiments on the local magnetization reversal of artificial magnetic skyrmions in a Co/Pt multilayer film with a perpendicular magnetization by a magnetic force microscope (MFM) probe. The sample was a Co/Pt film containing an array of cylindrical regions with reduced anisotropy, modified by a focused He+ ion beam. The magnetic state of the sample was monitored by magnetic force microscopy. The magnetization reversal was performed by the MFM probe field during passes over the sample at low altitudes. The effects of the interaction of the field of the MFM probe with the skyrmion state of magnetization in these structures are investigated by micromagnetic simulation.

Воздействие поля зонда магнитно-силового микроскопа на скирмионное состояние в модифицированной пленке Co/Pt с перпендикулярной анизотропией

We present the experimental magnetization reversal of artificial magnetic skyrmions in a Co/Pt multilayer film with perpendicular magnetization by a magnetic force microscope probe. The sample was a Co/Pt film containing an array of cylindrical regions with reduced anisotropy, which were modified by a focused He+ ion beam. The magnetic state of the sample was monitored by magnetic force microscopy. The local magnetization reversal was performed by the field of magnetic force microscope probe passing over the sample at low height. The effects of magnetostatic interaction between the probe field and skyrmion magnetization in these structures are investigated by micromagnetic simulations.

Indirect magnetic force microscopy.

Magnetic force microscopy (MFM) is an atomic force microscopy (AFM)-based technique to map magnetic domains in a sample. MFM is widely used to characterize magnetic recording media, magnetic domain walls in materials, nanoparticles and more recently iron deposits in biological samples. However, conventional MFM requires multiple scans of the samples, suffers from various artifacts and is limited in its capability for multimodal imaging or imaging in a fluid environment. We propose a new modality, namely indirect magnetic force microscopy (ID-MFM), a technique that employs an ultrathin barrier between the probe and the sample. Using fluorescently conjugated superparamagnetic nanoparticles, we demonstrate how ID-MFM can be achieved using commercially available silicon nitride windows, MFM probes and AFM equipment. The MFM signals obtained using ID-MFM were comparable to those obtained using conventional MFM. Further, samples prepared for ID-MFM were compatible with multi-modal imaging via fluorescence and transmission electron microscopy. Thus ID-MFM can serve as a high-throughput, multi-modal microscopy technique which can be especially attractive for detecting magnetism in nanoparticles and biological samples.

Magnetic imaging using geometrically constrained nano-domain walls.

Magnetic nanostructures, as part of hybrid CMOS technology, have the potential to overcome silicon's scaling limit. However, a major problem is how to characterize their magnetization without disturbing it. Magnetic force microscopy (MFM) offers a convenient way of studying magnetization, but spatial resolution and sensitivity are usually boosted at the cost of increasing probe-sample interaction. By using a single magnetic domain wall (DW), confined in a V-shape nanostructure fabricated at the probe apex, it is demonstrated here that the spatial resolution and the magnetic sensitivity can be decoupled and both enhanced. Indeed, owing to the nanostructure's strong shape anisotropy, DW-probes have 2 high and 2 low magnetic moment states with opposite polarities, characterised by a geometrically constrained pinned DW, and curled magnetization, respectively. Electron holography studies, supported by numerical simulations, and in situ MFM show that the DW-probe state can be controlled, and thus used as a switchable tool with a low/high stray field intensity.

Local magnetization of GeTe/Sb2Te3 superlattice films using a scanning probe microscope

Local magnetization of chalcogenide superlattices (SL) of [(GeTe)2 (Sb2Te3)]n (n=4 and 8) was performed using a magnetic force microscopy (MFM) at room temperature. We show that stripe patterns appeared in MFM phase images after magnetizing of the SL by holding the MFM probe at a short distance to the SL surface at room temperature. The probe-induced stripe pattern remained after storage for several days, and which differs from electric poling. We attributed the SL magnetization to the imbalance in the amount of spin-up and spin-down carriers in helical interface bands under the stray magnetic field.

Magnetization Reversal of Permalloy Microparticles with the Configuration Anisotropy by Magnetic-Force Microscopy

Abstract—Magnetic force microscopy has been used to study the distribution of the magnetization in permalloy microparticles with a configurational anisotropy. The triangular particles with different degrees of concavity of the lateral sides have been studied. An analysis of the results enables us to state that the particles can be in several quasi-homogeneous stable states. It is shown that the particle magnetization reversal can occur both stepwise and also via an intermediate state in the dependence on the particle orientation. It is demonstrated that the quasi-homogeneous magnetization orientation in a particle can be changed by a magnetic-force microscope probe.

Interplay of magnetic anisotropies on the magnetostrictive behavior of Fe–Co thin films

This paper reports the structure, microstructure, domain imaging and magnetostrictive properties of Fe50Co50 thin grown on Si substrates with different thicknesses namely 40, 80, 100 and 120 nm. Structural studies revealed that the films are crystalline in nature with bcc type structure. Magnetization studies exhibited predominant in-plane magnetic anisotropy for all the films. In addition to this films grown with higher thicknesses also showed co-existence of out-of-plane magnetic anisotropy along with in-plane magnetic components. Angle dependent hysteresis measurements indicated presence of weak uni-axial magnetic anisotropy along the plane for all the films. Longitudinal magneto-optic Kerr microscopy studies revealed nucleation of reverse domains for the film grown with low thickness. Wide band domains with few zig–zag branched features have been observed for the films grown with higher thicknesses. Magnetic force microscopy investigations along the out-of-plane direction showed increase in magnetic phase contrast with increase in film thicknesses. Magnetostriction derived from the deflection measurements are found to decrease with increase in film thicknesses. Presence of competing anisotropies has been found to be prominent reason for the decrease in the magnetostriction with increase in film thickness.

Crystalline and magnetic microstructures of iron-rich Sm(Co0.65Fe0.26Cu0.07Zr0.02)7.8 sintered magnets: Isothermal aging effect

Crystalline and magnetic microstructures of the iron-rich Sm(Co0.65Fe0.26Cu0.07Zr0.02)7.8 anisotropic sintered magnets after isothermal aging process were investigated systematically by using transmission electron microscope (TEM) and magnetic force microscopy (MFM). As the isothermal aging time (t) increases from 0.5 to 20 h, the remanences of the specimens almost keep constant (11.4 kGs), while the intrinsic coercivity (Hcj) shows an increase from 1.13 to 7.93 kOe, which is much higher than the well-known value of the order of 1 kOe. TEM investigation indicates that the cellular microstructures are incomplete together with partially phase transformation of 1:7H to 2:7R and 5:19H when t = 0.5 h. When t reaches 5 h, the phase transformation is almost completed. With t increasing from 2.5 to 20 h the average cellular size of the specimens increases from ∼90 to ∼150 nm and the density of the lamellae phase increases from ∼0.014 to ∼0.033 1/nm. MFM investigations show that the average surface width (Ws) decreases from 0.86 to 0.67 μm initially and then increases to 0.98 μm and the main domain width (Wm) decreases from 2.17 to 1.21 μm initially and then increases to 1.51 μm. And the Wm is about two times of Ws for the specimens because of the smaller magnetostatic energy of the surface layer of the specimens with c-axis parallel to the imaging plane. It is impressive that the domain walls form in straight line through cellular structures as t is less than 5 h, and in a zig-zag shape when t is over 5 h. This is the first time to reveal systematically the domain structures for the iron-rich 2:17-type Sm-Co magnets during isothermal aging process. The evolution of the magnetic microstructures is ascribed to the variation of the effective intrinsic magnetic properties of cell and cell boundary phases originating from both the phase transformation and development of cellular structures.

Individually grown cobalt nanowires as magnetic force microscopy probes.

AC electric fields were utilized in the growth of individual high-aspect ratio cobalt nanowires from simple salt solutions using the Directed Electrochemical Nanowire Assembly method. Nanowire diameters were tuned from the submicron scale to 40 nm by adjusting the AC voltage frequency and the growth solution concentration. The structural properties of the nanowires, including shape and crystallinity, were identified using electron microscopy. Hysteresis loops obtained along different directions of an individual nanowire using vibrating sample magnetometry showed that the magnetocrystalline anisotropy energy has the same order of magnitude as the shape anisotropy energy. Additionally, the saturation magnetization of an individual cobalt nanowire was estimated to be close to the bulk single crystal value. A small cobalt nanowire segment was grown from a conductive atomic force microscope cantilever tip that was utilized in magnetic force microscopy (MFM) imaging. The fabricated MFM tip provided moderate quality magnetic images of an iron-cobalt thin-film sample.