Primer Design Software Research Articles

A Multiplex PCR Method for Simultaneous Detection of Infectious Laryngotracheitis Virus and Ornithobacterium rhinotracheale

To date, many fluorescence- and gel-based multiplex polymerase chain reaction (PCR) assays have been developed for the simultaneous detection of multiple infectious agents of respiratory disease in poultry. However, PCR assays are not available for other important emerging respiratory bacteria, such as Ornithobacterium rhinotracheale (ORT). We aimed to fill this gap by establishing a new duplex PCR method for the simultaneous detection of infectious laryngotracheitis virus (ILTV) and ORT. Multiplex primer design software was used to select the compatible multiplex primer pairs. It was determined that an annealing temperature of 65 °C and an initial concentration of 2.5 pmol/µL for each primer set were the most suitable conditions for multiplex PCR. The assay was confirmed to be specific, as it only detected the target pathogens, even in the presence of six non-target agents. The limit of detection was up to 103 copies/µL of template DNA for both ILTV and ORT. In the screening of 304 field samples, 23, 88, and 44 were positive for both ILTV and ORT, solely for ILTV, and solely ORT, respectively.

A novel loop-mediated isothermal amplification-lateral flow dipstick method for Helicobacter pylori detection.

To eradicate Helicobacter pylori (H. pylori) and reduce the risk of gastric cancer, a sensitive, specific, convenient, and simple detection method is needed. This study aimed to establish a novel loop-mediated isothermal amplification-lateral flow dipstick (LAMP-LFD) method for H. pylori detection. LAMP primer design software was used to design primers for the conserved sites of the H. pylori ureB gene. UreB-FIP-labeled biotin was used for LAMP amplification, and FAM-labeled probes were specifically hybridized with LAMP amplification products, which were then detected by LFD. In addition, a clinical study was conducted to assess LAMP-LFD in 20 fecal samples. The results of the optimization indicated that H. pylori could be specifically detected by LFD without cross-reaction with other non-H. pylori bacteria when the LAMP was performed at 65°C for 60 min. The lower limit of the detection method was 102 copies/μL, which was 100 times the sensitivity of polymerase chain reaction (PCR). H. pylori-positive fecal samples were detected by LAMP-LFD in 13/20 patients. In conclusion, a new LAMP-LFD assay has been fully established and confirmed for H. pylori detection. The entire process can be completed in approximately 1.5 h, with the advantages of strong specificity, high sensitivity, and simple operation. This study provides a novel potential method for the detection of H. pylori in the clinical settings of primary hospitals and low-resource countries.

V-primer: software for the efficient design of genome-wide InDel and SNP markers from multi-sample variant call format (VCF) genotyping data.

DNA markers are indispensable tools in genetics and genomics research as well as in crop breeding, particularly for marker-assisted selection. Recent advances in next-generation sequencing technology have made it easier to obtain genome sequences for various crop species, enabling the large-scale identification of DNA polymorphisms among varieties, which in turn has made DNA marker design more accessible. However, existing primer design software is not suitable for designing many types of genome-wide DNA markers from next-generation sequencing data. Here, we describe the development of V-primer, high-throughput software for designing insertion/deletion, cleaved amplified polymorphic sequence, and single-nucleotide polymorphism (SNP) markers. We validated the applicability of these markers in different crops. In addition, we performed multiplex PCR targeted amplicon sequencing using SNP markers designed with V-primer. Our results demonstrate that V-primer facilitates the efficient and accurate design of primers and is thus a useful tool for genetics, genomics, and crop breeding. V-primer is freely available at https://github.com/ncod3/vprimer.

BigDNA: Primer Design Software for Overlap-Based Assembly of Phage Genomes and Larger DNAs.

Gibson assembly and assembly-in-yeast are strategies to create long synthetic DNAs from diverse fragments, for example, when engineering bacteriophage genomes. Design for these methods requires terminal sequence overlaps in the fragments, determining the order of assembly. Design to rebuild a genomic fragment that is too long for a single PCR presents a puzzle since some candidate joint regions cannot yield satisfactory primers for the overlap. No existing overlap assembly design software is open-source, and none explicitly supports rebuilding. We describe here bigDNA software that solves the rebuilding puzzle by recursive backtracking, with options to remove or introduce genes; it also tests for mispriming on the template DNA. BigDNA was tested with 3082 prophages and other genomic islands (GIs), from 20 to 100 kb, and the synthetic Mycoplasma genitalium genome. Rebuilding assembly design succeeded for all but ∼1% of GIs. BigDNA will speed and standardize assembly design.

The web-based multiplex PCR primer design software Ultiplex and the associated experimental workflow: up to 100- plex multiplicity

BackgroundA large number of variants have been employed in various medical applications, such as providing medication instructions, disease susceptibility testing, paternity testing, and tumour diagnosis. A high multiplicity PCR will outperform other technologies because of its lower cost, reaction time and sample consumption. To conduct a multiplex PCR with higher than 100 plex multiplicity, primers need to be carefully designed to avoid the formation of secondary structures and nonspecific amplification between primers, templates and products. Thus, a user-friendly, highly automated and highly user-defined web-based multiplex PCR primer design software is needed to minimize the work of primer design and experimental verification.ResultsUltiplex was developed as a free online multiplex primer design tool with a user-friendly web-based interface (http://ultiplex.igenebook.cn). To evaluate the performance of Ultiplex, 294 out of 295 (99.7%) target primers were successfully designed. A total of 275 targets produced qualified primers after primer filtration, and 271 of those targets were successfully clustered into one compatible PCR group and could be covered by 108 primers. The designed primer group stably detected the rs28934573(C > T) mutation at lower than a 0.25% mutation rate in a series of samples with different ratios of HCT-15 and HaCaT cell line DNA.ConclusionUltiplex is a web-based multiplex PCR primer tool that has several functions, including batch design and compatibility checking for the exclusion of mutual secondary structures and mutual false alignments across the whole genome. It offers flexible arguments for users to define their own references, primer Tm values, product lengths, plex numbers and tag oligos. With its user-friendly reports and web-based interface, Ultiplex will provide assistance for biological applications and research involving genomic variants.

A novel regulatory role of trappc9 and L-plastin in osteoarthritis

A novel regulatory role of trappc9 and L-plastin in osteoarthritis

In silico design and validation of a highly degenerate primer pair: a systematic approach

BackgroundThe techniques of amplifying genetic materials have enabled the extensive study of several biological activities outside the biological milieu of living systems. More recently, this approach has been extended to amplify population of genes, from evolutionarily related gene family for detection and evaluation of microbial consortial with several unique potentialities (e.g., enzymatic degradability). Conceivably, primer mixtures containing substitutions of different bases at specific sites (degenerate primers) have enabled the amplification of these genes in PCR reaction. However, the degenerate primer design problem (DPD) is a constraint to designing this kind of primer. To date, different algorithms now exist to solve various versions of DPD problem, many of which, only few addresses and satisfy the criteria to design primers that can extensively cover high through-put sequences while striking the balance between specificity and efficiency. The highly degenerate primer (HYDEN) design software program primarily addresses this variant of DPD problem termed “maximum coverage-degenerate primer design (MC-DPD)” and its heuristics have been substantiated for optimal efficiency from significant successes in PCR. In spite of the premium presented for designing degenerate primers, literature search has indicated relatively little use of its heuristics. This has been thought to result from the complexity of the program since it is run only by command-line, hence limiting its accessibility. To solve this problem, researchers have optionally considered the manual design of degenerate primers or design through software programs that provides accessibility through a graphical user interface (GUI). Realizing this, we have attempted in this study to provide a user-friendly approach for researchers with little or no background in bioinformatics to design degenerate primers using HYDEN ResultsVirtual Tests of our designed degenerate primer pair through in silico PCR substantiated the correspondence between efficiency and coverage with the target sequences as pre-defined by the initial HYDEN output, thereby validating the potentials of HYDEN to effectively solve the MC-DPD problem. Additionally, the designed primer-pair mechanistically amplified all sequences used as a positive control with no amplification observed in the negative controls. ConclusionIn this study, we provided a turnkey protocol to simplify the design of degenerate primers using the heuristics of the HYDEN software program.

Classification and review of free PCR primer design software.

Polymerase chain reaction (PCR) has been a revolutionary biomedical advancement. However, for PCR to be appropriately used, one must spend a significant amount of effort on PCR primer design. Carefully designed PCR primers not only increase sensitivity and specificity, but also decrease effort spent on experimental optimization. Computer software removes the human element by performing and automating the complex and rigorous calculations required in PCR primer design. Classification and review of the available software options and their capabilities should be a valuable resource for any PCR application. This article focuses on currently available free PCR primer design software and their major functions (https://pcrprimerdesign.github.io/). The software are classified according to their PCR applications, such as Sanger sequencing, reverse transcription quantitative PCR, single nucleotide polymorphism detection, splicing variant detection, methylation detection, microsatellite detection, multiplex PCR and targeted next generation sequencing, and conserved/degenerate primers to clone orthologous genes from related species, new gene family members in the same species, or to detect a group of related pathogens. Each software is summarized to provide a technical review of their capabilities and utilities.

In Silico Design of PCR Primers to Amplify the Salt Tolerance Gene in Soybean

Soybean yield is decreased because of many stresses such as salt stress. Ionic and osmotic stresses are the effects of salt stress. An effective way of maintaining sustainable production in salt-affected soil is through breeding high salt tolerance soybean, which can be detected by PCR. The optimal PCR plays an important role in gene expression analysis. The success of a PCR-based method largely depends on the optimal primer sequence analysis in silico prior to a wet-bench experiment. Here we described designing of primer using web-based tools. Many types of online primer design software are available, which can be used free of charge to design desirable primers. The objective was to design of PCR primers to amplify the salt tolerance gene in soybean. A highly conserved region of 411 bases was detected by Clustal Omega. Primers were predicted using Primer3 based on conserved region, considering ideal conditions for primer length, hairpin, dimer, Tm, and GC%. The predicted forward and reverse primers were validated using NetPrimer. Both forward and reverse primers have shown significant similarity with salt tolerance gene and recommended to be used to amplify the salt tolerance gene in soybean.

Softepigen: Primers Design Web-Based Tool for MS-HRM Technique

Polymerase Chain Reaction (PCR) based techniques for DNA methylation techniques includes the MS-HRM technique. Methylation Sensitive High-Resolution Melting (MS-HRM) primer-design requires a set of necessary recommendations for such DNA methylation assessment. However, there were not any available software that allows an automatic design of this kind primers. We present Softepigen, the first complete MS-HRM primer design software. Softepigen allows to search for primers in a genomic region following Wojdacz's recommendations and targets primer binding regions with high linguistic complexity sequences that increase the specificity of the converted sequence of the human genome. We performed in-silico PCR analysis through BiSearch ePCR tool to validate the specificity of the of the primers designed using Softepigen. Softepigen for MS-HRM performance in our genomic regions of interest show satisfactory specificity measurements, and we implemented it for freely available use in the web-based interface at www.soft-epigen.com.

MSP-HTPrimer: a high-throughput primer design tool to improve assay design for DNA methylation analysis in epigenetics.

BackgroundBisulfite (BS) conversion-based and methylation-sensitive restriction enzyme (MSRE)-based PCR methods have been the most commonly used techniques for locus-specific DNA methylation analysis. However, both methods have advantages and limitations. Thus, an integrated approach would be extremely useful to quantify the DNA methylation status successfully with great sensitivity and specificity. Designing specific and optimized primers for target regions is the most critical and challenging step in obtaining the adequate DNA methylation results using PCR-based methods. Currently, no integrated, optimized, and high-throughput methylation-specific primer design software methods are available for both BS- and MSRE-based methods. Therefore an integrated, powerful, and easy-to-use methylation-specific primer design pipeline with great accuracy and success rate will be very useful.ResultsWe have developed a new web-based pipeline, called MSP-HTPrimer, to design primers pairs for MSP, BSP, pyrosequencing, COBRA, and MSRE assays on both genomic strands. First, our pipeline converts all target sequences into bisulfite-treated templates for both forward and reverse strand and designs all possible primer pairs, followed by filtering for single nucleotide polymorphisms (SNPs) and known repeat regions. Next, each primer pairs are annotated with the upstream and downstream RefSeq genes, CpG island, and cut sites (for COBRA and MSRE). Finally, MSP-HTPrimer selects specific primers from both strands based on custom and user-defined hierarchical selection criteria. MSP-HTPrimer produces a primer pair summary output table in TXT and HTML format for display and UCSC custom tracks for resulting primer pairs in GTF format.ConclusionsMSP-HTPrimer is an integrated, web-based, and high-throughput pipeline and has no limitation on the number and size of target sequences and designs MSP, BSP, pyrosequencing, COBRA, and MSRE assays. It is the only pipeline, which automatically designs primers on both genomic strands to increase the success rate. It is a standalone web-based pipeline, which is fully configured within a virtual machine and thus can be readily used without any configuration. We have experimentally validated primer pairs designed by our pipeline and shown a very high success rate of primer pairs: out of 66 BSP primer pairs, 63 were successfully validated without any further optimization step and using the same qPCR conditions. The MSP-HTPrimer pipeline is freely available from http://sourceforge.net/p/msp-htprimer.Electronic supplementary materialThe online version of this article (doi:10.1186/s13148-016-0269-3) contains supplementary material, which is available to authorized users.

Pengembangan Sejumlah Primer untuk Reverse Transcriptase Polymerase Chain Reaction Guna Melacak Virus Flu Burung di Indonesia (DEVELOPMENt OF PRIMERS FOR REVERSE TRANSCRIPTASE POLYMERASE CHAIN REACTION TO DETECT AVIAN INFLUENZA VIRUS IN INDONESIA)

Until recently, two clades of of avian influenza viruses (AIVs) designated as 2.3.2 and 2.2.3 havebeen circulating in Indonesia. Mutations of AIV genes have cretaed many more variants of the virus. It istherefore important to evaluate the appropriate methods used for the detection and diagnosis of AI virusin the field. Reverse Transcriptase-Polymerase Chain Reaction (RT-PCR) have been used as a standardmethod for detection of AIV in many laboratories in Indonesia. The success of RT-PCR for detection ofAIV virus is dependent on the nucleotide sequences of primer that match with the circulating of AIVs. Theaims of this study was to develop RT-PCR by designing primers for H5 subtype specific to the circulatingAIVs in the field. The primers were designed using Primer Design software, and optimization andvalidation of the primer were conducted using AIVs that have been characterized in the previous study.The primers were then used RT-PCR using AIV isolates from field samples and their sensitivity andspecificity were then determined. The results showed that the H5 primers designed in this study, H5-IDand H5-NLP, was able to detect the AIVs in field samples better than the H5-specific primers have beenused previously. In conclusion, H5 primers designed based on recent viruses in the field showed betterresults in the detection of AI virus as compared to the previous primers. As AIV-H5N1 subtype in the fieldwill continue to change and evolve, the use of primers designed in this study is recommended for diagnosisof H5 AIV.

Artificial Synthesis of Conserved Segment S Gene Fragment of Rift Valley Fever Virus and Preliminary Study of Its Reverse Transcription Loop-Mediated Isothermal Amplification Detection Method

Purpose: To develop a rapid detection method for Rift Valley fever virus (RVFV) diagnosis.Methods: According to the reference sequences of RVFV published in GenBank, nine overlapping polymerase chain reaction (PCR) primers and four specific reverse transcription loop-mediated isothermal amplification (RT-LAMP) primers were designed using DNAStar and LAMP primer design software, respectively. Based on the synthesis of a conserved part of the RVFV S segment gene sequence using overlapping PCR, RT-LAMP assay was first established and evaluated after a series of tests, including, optimization of reaction conditions, and sensitivity and specificity tests.Result: A target RVFV S segment gene fragment of 288 bp was synthesised. The optimal reaction conditions for RT-LAMP assay were 63 °C for 45 min: the assay has a specific ladder-like pattern of amplification bands from about 120 bp. The lowest target gene copy number of RT-LAMP for RVFV detection was 70 copies. The assay showed good specificity as only the synthesised target RVFV gene was amplified with no amplification for the detection of Peste des petits ruminants virus, Epidemic encephalitis B virus, E. coli, Pasteurella multocida, or Salmonella.Conclusion: This study provides a rapid, sensitive, specific RT-LAMP method for RVFV detection.Keywords: Rift valley fever virus, Overlapping polymerase chain reaction, Reverse transcription loopmediated isothermal amplification, Rapid diagnosis test

Abstract B23: Targeted exome sequencing for effectors involving the MAPK and PI3K pathways of cutaneous melanoma in the minority population: Identifying unique molecular signatures

Abstract Background: Melanoma is a global problem, as its incidence is rising faster than any other malignancy for both men and women. Since Caucasians are primarily affected by melanoma, most of the clinical effort and patient education is focused on this cohort. In minorities, melanoma is usually detected at a more advanced stage, distributed on sun-protected areas and associated with a worse survival. Previous studies have depicted the relevance of alterations in the MAPK and PI3K pathways; however, inclusion of a multi-ethnic population comprising of unique groups such as Native Hawaiians, Pacific Islanders, Filipinos, and other Asians has been limited. Methods: IRB approval was obtained for this retrospective analysis. From 2008 to 2013, 10 Asian/Pacific Islander patients histologically confirmed to have invasive conventional (non-acral) cutaneous melanoma were evaluated at a tertiary institution. Data including age, gender, tumor location, Breslow thickness, ulceration, and mitoses per mm squared were compiled. Using a cloud based in silica primer design software target genes was chosen. Multiplex primers were generated. Coverage was assessed using the University of California, Santa Cruz (UCSC) and National Center for Biotechnology Information (NCBI) genome browsers to ensure that known pathogenic single nucleotide polymorphisms were captured from the latest dbSNP genome build. Targets included AKT, BRAF, C-KIT, MEK, MTOR, NRAS, and PI3K. This pre-designed multiplexed panel contains genes across families representing driver mutations in signaling pathways. Next generation sequencing was performed using the Ion Torrent Personal Genome Machine™. Results: Our findings demonstrated a unique molecular distribution. Interestingly in our non-Caucasian cohort of conventional melanoma, PI3K mutations were found in 30% (normally 2-6% in Caucasians) of the biospecimens, which supports our hypothesis that ethnic minorities may have a distinct biological profile. Furthermore, 40% of this minority cohort had a c-KIT mutation which is atypical for non-acral melanoma; in addition 2 of these c-KIT mutations were novel and not classically associated with melanoma in Caucasians. What is also compelling is that 50% had simultaneous mutations, including 30% that had a concomitant PI3K mutation. Demographics of the multi-ethnic cohort included mean age of 57.5 years (range 19-80) and male gender (4/10; 40 %). Tumor location primarily involved the extremity (8/10; 80%); median Breslow thickness was 1.97 mm (range 0.77-16.0), and mean mitoses per mm squared was 5.2 (range 0-16). Conclusion: This is compelling data that may be applied to patient selection in future trials utilizing targeted agents and assist with gleaning insight into the mechanism of melanoma genesis. Molecular profiling diverse cohorts may improve the identification of novel molecular signatures germane to melanoma biology and therapy. Note: This abstract was not presented at the conference. Citation Format: Shane Y. Morita. Targeted exome sequencing for effectors involving the MAPK and PI3K pathways of cutaneous melanoma in the minority population: Identifying unique molecular signatures. [abstract]. In: Proceedings of the Seventh AACR Conference on The Science of Health Disparities in Racial/Ethnic Minorities and the Medically Underserved; Nov 9-12, 2014; San Antonio, TX. Philadelphia (PA): AACR; Cancer Epidemiol Biomarkers Prev 2015;24(10 Suppl):Abstract nr B23.

Wet-lab tested microRNA assays for qPCR studies with SYBR® Green and DNA primers in pig tissues.

MicroRNAs are key post-transcriptional regulators of gene expression that are involved in several biological processes including those that mediate disease pathophysiology. Hence, quantifying microRNA expression levels can provide important and novel insights into disease biology. In recent years, the pig has emerged as an excellent large animal model for studying human diseases and conditions (e.g. obesity) due to similarities in organ size, gastro-intestinal tract, metabolism, immune response, genetics and the availability of relevant tissues that are not normally easily available in humans. We have previously developed two useful tools in the field of microRNA quantitative real time PCR (qPCR): 1) a very specific, sensitive and simple qPCR method based on DNA primers, MiR-specific qPCR; and 2) the free primer-design software miRprimer. The present study integrates in a publicly accessible database all available information on validated porcine microRNA qPCR assays that have utilized these tools. Due to the high phylogenetic conservation in microRNA sequence between pig, humans and other domestic species this database is a very valuable resource for the broader scientist community who are working on microRNAs and want to use readily tested qPCR assays in a simple and cost-effective manner.

PrecisePrimer: an easy-to-use web server for designing PCR primers for DNA library cloning and DNA shuffling.

PrecisePrimer is a web-based primer design software made to assist experimentalists in any repetitive primer design task such as preparing, cloning and shuffling DNA libraries. Unlike other popular primer design tools, it is conceived to generate primer libraries with popular PCR polymerase buffers proposed as pre-set options. PrecisePrimer is also meant to design primers in batches, such as for DNA libraries creation of DNA shuffling experiments and to have the simplest interface possible. It integrates the most up-to-date melting temperature algorithms validated with experimental data, and cross validated with other computational tools. We generated a library of primers for the extraction and cloning of 61 genes from yeast DNA genomic extract using default parameters. All primer pairs efficiently amplified their target without any optimization of the PCR conditions.

Developing market class specific InDel markers from next generation sequence data in Phaseolus vulgaris L.

Next generation sequence data provides valuable information and tools for genetic and genomic research and offers new insights useful for marker development. This data is useful for the design of accurate and user-friendly molecular tools. Common bean (Phaseolus vulgaris L.) is a diverse crop in which separate domestication events happened in each gene pool followed by race and market class diversification that has resulted in different morphological characteristics in each commercial market class. This has led to essentially independent breeding programs within each market class which in turn has resulted in limited within market class sequence variation. Sequence data from selected genotypes of five bean market classes (pinto, black, navy, and light and dark red kidney) were used to develop InDel-based markers specific to each market class. Design of the InDel markers was conducted through a combination of assembly, alignment and primer design software using 1.6× to 5.1× coverage of Illumina GAII sequence data for each of the selected genotypes. The procedure we developed for primer design is fast, accurate, less error prone, and higher throughput than when they are designed manually. All InDel markers are easy to run and score with no need for PCR optimization. A total of 2687 InDel markers distributed across the genome were developed. To highlight their usefulness, they were employed to construct a phylogenetic tree and a genetic map, showing that InDel markers are reliable, simple, and accurate.

PD5: A General Purpose Library for Primer Design Software

BackgroundComplex PCR applications for large genome-scale projects require fast, reliable and often highly sophisticated primer design software applications. Presently, such applications use pipelining methods to utilise many third party applications and this involves file parsing, interfacing and data conversion, which is slow and prone to error. A fully integrated suite of software tools for primer design would considerably improve the development time, the processing speed, and the reliability of bespoke primer design software applications.ResultsThe PD5 software library is an open-source collection of classes and utilities, providing a complete collection of software building blocks for primer design and analysis. It is written in object-oriented C++ with an emphasis on classes suitable for efficient and rapid development of bespoke primer design programs. The modular design of the software library simplifies the development of specific applications and also integration with existing third party software where necessary. We demonstrate several applications created using this software library that have already proved to be effective, but we view the project as a dynamic environment for building primer design software and it is open for future development by the bioinformatics community. Therefore, the PD5 software library is published under the terms of the GNU General Public License, which guarantee access to source-code and allow redistribution and modification.ConclusionsThe PD5 software library is downloadable from Google Code and the accompanying Wiki includes instructions and examples: http://code.google.com/p/primer-design

A High-Plex PCR Approach for Massively Parallel Sequencing

Current methods for targeted massively parallel sequencing (MPS) have several drawbacks, including limited design flexibility, expense, and protocol complexity, which restrict their application to settings involving modest target size and requiring low cost and high throughput. To address this, we have developed Hi-Plex, a PCR-MPS strategy intended for high-throughput screening of multiple genomic target regions that integrates simple, automated primer design software to control product size. Featuring permissive thermocycling conditions and clamp bias reduction, our protocol is simple, cost- and time-effective, uses readily available reagents, does not require expensive instrumentation, and requires minimal optimization. In a 60-plex assay targeting the breast cancer predisposition genes PALB2 and XRCC2, we applied Hi-Plex to 100 ng LCL-derived DNA, and 100 ng and 25 ng FFPE tumor-derived DNA. Altogether, at least 86.94% of the human genome-mapped reads were on target, and 100% of targeted amplicons were represented within 25-fold of the mean. Using 25 ng FFPE-derived DNA, 95.14% of mapped reads were on-target and relative representation ranged from 10.1-fold lower to 5.8-fold higher than the mean. These results were obtained using only the initial automatically-designed primers present in equal concentration. Hi-Plex represents a powerful new approach for screening panels of genomic target regions.

Molecular Biology Techniques Q&A

Molecular Biology Techniques Q&A