Primary Biological Aerosol Particles Research Articles

Assessing exposure to airborne fungi and bacteria in the horse-riders environment: A pilot study

Among airborne biological contaminants, several pathogenic and/or allergenic fungi and bacteria can affect the health of horses and humans. Exposure to primary biological aerosol particles (PBAP) in the equine environment remains poorly understood, although environmental factors play a major role in the development of respiratory diseases and impaired performance in horses. This pilot study was conducted during a training course for young racers. Ambient and personal air samples provided original data on the microbial composition of PBAP in the riders’ immediate environment (stable, outdoor, riding arena), using culture-based and metagenomic approaches. The culture-based approach showed average levels of fungi and bacteria of 2.3 × 104 and 8.3 × 105 CFU/m3 respectively during training. Seventy-one and 50 fungal and bacterial species were respectively identified, while the metagenomic approach identified 211 and 285, respectively. It should be noted, however, that two-thirds of the bacterial and fungal genera were found by both approaches. Among these species, various pathogenic and/or allergenic fungi (Alternaria spp., Aspergillus spp., Cladosporium spp. and Lichtheimia ramosa) and bacteria (Aeromonas spp., Bacillus spp., Pseudomonas spp. and Staphylococcus spp.) were highlighted. This study underlines the value of the combined use of culture-based and metagenomic approaches to provide an overview of the distribution of different fungal and bacterial phyla, genera and species in the equine environment. Statistical analysis also suggests interactions between microbiological contaminants (bacteria and mold) and climatic parameters (rain, wind, temperature).

Contribution of fluorescent primary biological aerosol particles to low-level Arctic cloud residuals

Abstract. Mixed-phase clouds (MPCs) are key players in the Arctic climate system due to their role in modulating solar and terrestrial radiation. Such radiative interactions rely, among other factors, on the ice content of MPCs, which is regulated by the availability of ice-nucleating particles (INPs). While it appears that INPs are associated with the presence of primary biological aerosol particles (PBAPs) in the Arctic, the nuances of the processes and patterns of INPs and their association with clouds and moisture sources have not been resolved. Here, we investigated for a full year the abundance of and variability in fluorescent PBAPs (fPBAPs) within cloud residuals, directly sampled by a multiparameter bioaerosol spectrometer coupled to a ground-based counterflow virtual impactor inlet at the Zeppelin Observatory (475 m a.s.l.) in Ny-Ålesund, Svalbard. fPBAP concentrations (10−3–10−2 L−1) and contributions to coarse-mode cloud residuals (0.1 to 1 in every 103 particles) were found to be close to those expected for high-temperature INPs. Transmission electron microscopy confirmed the presence of PBAPs, most likely bacteria, within one cloud residual sample. Seasonally, our results reveal an elevated presence of fPBAPs within cloud residuals in summer. Parallel water vapor isotope measurements point towards a link between summer clouds and regionally sourced air masses. Low-level MPCs were predominantly observed at the beginning and end of summer, and one explanation for their presence is the existence of high-temperature INPs. In this study, we present direct observational evidence that fPBAPs may play an important role in determining the phase of low-level Arctic clouds. These findings have potential implications for the future description of sources of ice nuclei given ongoing changes in the hydrological and biogeochemical cycles that will influence the PBAP flux in and towards the Arctic.

Land-use patterns and fungal bioaerosols in the Brazilian Atlantic Forest biome

Whilst the importance of fungal primary biological aerosol particles (PBAPs) has been recognised, few studies have empirically assessed how land-use patterns influence them. Here, we show the impacts of different land-use patterns on fungal PBAPs within the Brazilian Atlantic Forest biodiversity hotspot. Spanning a distance of ca. 600 km within this biome, we collected fungal bioaerosols in the following land-use patterns: a 25-year-old coffee plantation, a 2.5-year-old Eucalyptus plantation, a 3-months-old maize crop, a 2-year-old and another 7-year-old native forest reforestation area, and a native forest fragment. Using the portable Burkard air sampler, a total of 14 morphotype-species were found. Cladosporium sp. comprised as much as about 95% of all fungal spores collected, being present in all samples (frequency of 100%). Forest systems had as much as 5-to-19-fold more fungal spores in the air than maize crops. Sampling height and time (morning vs. afternoon) did not influence fungal concentration and number of species. In addition, using data derived from an eddy covariance tower in the Eucalyptus site, we estimated the emission rate to be 6649 spores m−2 s−1. Our study confirms that land-use patterns affect fungal PBAPs, and that replacing large areas of native Atlantic Forest by monospecific stands, a homogenisation of airborne fungi is occurring, with unknown consequences for climate regulation.

Effects of Pollen on Hydrometeors and Precipitation in a Convective System

AbstractAnemophilous (wind‐driven) pollen is one type of primary biological aerosol particle, which can rupture under high humidity conditions and form smaller sub‐pollen particles (SPPs). Both pollen and SPPs can reach the upper troposphere under convective conditions, acting as cloud condensation nuclei (CCN) and ice nucleating particles (INPs), thus influencing cloud formation and precipitation. However, the impacts of these biological aerosols on cold cloud formation and local climate remain unclear as there are large uncertainties on their emission flux and ice nucleating abilities. Here, we incorporate pollen emission and rupture processes in the Weather Research and Forecasting Model with Chemistry (WRF‐Chem) simulations and update the Morrison microphysics scheme within WRF‐Chem using aerosol‐aware INP parameterizations to account for pollen in addition to other anthropogenic and biogenic aerosol. INP parameterizations for pollen and SPP are derived from laboratory experiments. When including pollen rupture rates as observed in a series of chamber studies, SPP concentrations increase, leading to an increase of cloud ice and water by up to 50% and potentially extending the duration of the convective system. Among all simulated hydrometeors, graupel and raindrops exhibit the largest enhancements from the inclusion of SPPs, with intensifying precipitation at the backside of the convective system and a greater spatial extent. Sensitivity simulations indicate that SPPs have a greater effect on cloud microphysical processes than whole pollen grains, and further observational evidence is needed to constrain these processes.

Diversity and Distribution Patterns of Culturable Airborne Fungi in Jiroft City

Background and Aims: Fungal spores constitute a significant portion of primary biological aerosol particles, and large amounts have been identified in the air. They are present in the atmosphere throughout the year, and their concentration varies due to meteorological factors such as temperature, relative humidity, location, construction conditions, and vegetation. Exposure to airborne fungi has been linked with diseases such as allergic respiratory symptoms, rhinitis, asthma, and various infections. This study investigates the diversity and distribution of airborne fungal spores in Jiroft City, located in the southern region of Iran.
 Materials and Methods: Airborne fungal composition was sampled from indoor, outdoor, and hospital air using the sedimentation plate method. Grown fungi were identified using standard mycological techniques, including determining macroscopic and microscopic characteristics.
 Results: A total of 230 colonies belonging to 11 genera of fungi were isolated from all culture media. Fungi were isolated from 53 (80.3%) samples. The highest and lowest percent of positive samples were found in outdoor (100%) and hospital (64.3%) air samples, respectively. Cladosporium (43.9%) and Aspergillus (36.4%) were the most common fungi isolated from the samples. Rhodotorula, Syncephalastrum, Paecilomyces, Mucor, and Acremonium were the least isolated fungi (1.5%). 
 Conclusion: This study showed the difference in the diversity and distribution of fungi in different environments. Cladosporium and Aspergillus were the most common fungi isolated, which need to be considered due to their ability to cause various diseases.

Composition and sources of carbonaceous aerosol in the European Arctic at Zeppelin Observatory, Svalbard (2017 to 2020)

Abstract. We analyzed long-term measurements of organic carbon, elemental carbon, and source-specific organic tracers from 2017 to 2020 to constrain carbonaceous aerosol sources in the rapidly changing Arctic. Additionally, we used absorption photometer (Aethalometer) measurements to constrain equivalent black carbon (eBC) from biomass burning and fossil fuel combustion, using positive matrix factorization (PMF). Our analysis shows that organic tracers are essential for understanding Arctic carbonaceous aerosol sources. Throughout 2017 to 2020, levoglucosan exhibited bimodal seasonality, reflecting emissions from residential wood combustion (RWC) in the heating season (November to May) and from wildfires (WFs) in the non-heating season (June to October), demonstrating a pronounced interannual variability in the influence of WF. Biogenic secondary organic aerosol (BSOA) species (2-methyltetrols) from isoprene oxidation was only present in the non-heating season, peaking in July to August. Warm air masses from Siberia led to a substantial increase in 2-methyltetrols in 2019 and 2020 compared to 2017 to 2018. This highlights the need to investigate the contribution of local sources vs. long-range atmospheric transport (LRT), considering the temperature sensitivity of biogenic volatile organic compound emissions from Arctic vegetation. Tracers of primary biological aerosol particles (PBAPs), including various sugars and sugar alcohols, showed elevated levels in the non-heating season, although with different seasonal trends, whereas cellulose had no apparent seasonality. Most PBAP tracers and 2-methyltetrols peaked during influence of WF emissions, highlighting the importance of measuring a range of source-specific tracers to understand sources and dynamics of carbonaceous aerosol. The seasonality of carbonaceous aerosol was strongly influenced by LRT episodes, as background levels are extremely low. In the non-heating season, the organic aerosol peak was as influenced by LRT, as was elemental carbon during the Arctic haze period. Source apportionment of carbonaceous aerosol by Latin hypercube sampling showed mixed contributions from RWC (46 %), fossil fuel (FF) sources (27 %), and BSOA (25 %) in the heating season. In contrast, the non-heating season was dominated by BSOA (56 %), with lower contributions from WF (26 %) and FF sources (15 %). Source apportionment of eBC by PMF showed that FF combustion dominated eBC (70±2.7 %), whereas RWC (22±2.7 %) was more abundant than WF (8.0±2.9 %). Modeled BC concentrations from FLEXPART (FLEXible PARTicle dispersion model) attributed an almost equal share to FF sources (51±3.1 %) and to biomass burning. Both FLEXPART and the PMF analysis concluded that RWC is a more important source of (e)BC than WF. However, with a modeled RWC contribution of 30±4.1 % and WF of 19±2.8 %, FLEXPART suggests relatively higher contributions to eBC from these sources. Notably, the BB fraction of EC was twice as high as that of eBC, reflecting methodological differences between source apportionment by LHS and PMF. However, important conclusions drawn are unaffected, as both methods indicate the presence of RWC- and WF-sourced BC at Zeppelin, with a higher relative BB contribution during the non-heating season. In summary, organic aerosol (281±106 ng m−3) constitutes a significant fraction of Arctic PM10, although surpassed by sea salt aerosol (682±46.9 ng m−3), mineral dust (613±368 ng m−3), and typically non-sea-salt sulfate SO42- (314±62.6 ng m−3), originating mainly from anthropogenic sources in winter and from natural sources in summer.

Origin of secondary fatty alcohols in atmospheric aerosols in a cool–temperate forest based on their mass size distributions

Abstract. Fatty alcohols (FAs) are major components of surface lipids in plant leaves and serve as surface-active organic aerosols (OAs), which can act as primary biological aerosol particles (PBAPs). To elucidate the origin and formation of secondary fatty alcohols (SFAs) in atmospheric aerosols, their mass size distribution in aerosol samples obtained from a deciduous forest canopy was measured in spring, summer and autumn. The SFAs showed the highest concentration in spring (growing season), with n-nonacosan-10-ol being the most abundant. In spring and summer, the size peak of n-nonacosan-10-ol was in the particle size range >10.0 µm, whereas it was in the 1.9–3.0 µm range in autumn. The size distribution of n-nonacosan-10-ol did not show any significant correlation with that of the known biogenic tracers of pollen, soil and fungal spores in spring and summer. The overall results, together with SFAs measured in plant leaves, as well as the literature, suggest that SFAs originate mostly from plant waxes and that leaf senescence status is likely an important factor controlling the size distribution of SFAs. This study provides new insights into the possible sources of PBAPs and their effects on the ice nucleation activity of aerosols based on seasonal changes in particle size.

Regionally sourced bioaerosols drive high-temperature ice nucleating particles in the Arctic

Primary biological aerosol particles (PBAP) play an important role in the climate system, facilitating the formation of ice within clouds, consequently PBAP may be important in understanding the rapidly changing Arctic. Within this work, we use single-particle fluorescence spectroscopy to identify and quantify PBAP at an Arctic mountain site, with transmission electronic microscopy analysis supporting the presence of PBAP. We find that PBAP concentrations range between 10−3–10−1 L−1 and peak in summer. Evidences suggest that the terrestrial Arctic biosphere is an important regional source of PBAP, given the high correlation to air temperature, surface albedo, surface vegetation and PBAP tracers. PBAP clearly correlate with high-temperature ice nucleating particles (INP) (>-15 °C), of which a high a fraction (>90%) are proteinaceous in summer, implying biological origin. These findings will contribute to an improved understanding of sources and characteristics of Arctic PBAP and their links to INP.

Relationship of laser-induced fluorescence and scattered signal intensities of fluorescent PSL particles

The laser-induced fluorescence technique has been used to measure primary biological aerosol particles (PBAPs) in the atmosphere because of its ability to classify the origins of particles based on the combination of excitation and detection wavelengths. However, information on the fluorescence intensity related to the amounts of fluorescent compounds in airborne particles measured by this method is limited. Therefore, in this study, the scattered and fluorescent signals from fluorescent polystyrene latex (PSL) particles were observed simultaneously through laser-induced fluorescence. The ratio of the fluorescence to scattered signal intensities from individual particles was found to be almost equal for particles of the same size. Consequently, mixed-size fluorescent particles can be observed separately by simultaneously measuring the fluorescence and scattered signals from individual particles. Mie theory was used to calculate relative scattered signal intensities. Incorporating ratios of fluorescence to scattered signal and relative scattered signal intensities, relative fluorescence intensities were obtained. These results suggest that the relative fluorescence intensities are almost linear with respect to the square of the particle size.

Evaluation of a method to quantify the number concentrations of submicron water-insoluble aerosol particles based on filter sampling and complex forward-scattering amplitude measurements

Water-insoluble aerosol particles (WIAPs), such as black carbon (BC), mineral dust, and primary biological aerosol particles (PBAPs), affect climate through their interaction with radiation and clouds. However, with the exception of BC, methods to identify WIAP types and quantify their number concentrations are limited. Here, we evaluated a method that has been recently developed to measure the number concentrations of submicron WIAPs based on atmospheric aerosol measurements at an urban site in Nagoya, Japan. In this method, atmospheric aerosol particles are collected on a filter and dispersed in water. Then, the complex forward-scattering amplitudes of individual particles are measured. This complex parameter reflects the complex refractive index, volume, and shape of each measured particle, enabling the characterization of these physical properties from the signals. The WIAPs were classified as BC-like, dust-like, and PBAP-like particles based on their complex amplitude data. The number concentrations of BC-like particles were strongly correlated with those of refractory BC particles measured by a Single Particle Soot Photometer. BC-like and dust-like particles dominated the population of the submicron WIAPs, which was also confirmed using electron microscopy and Wideband Integrated Bioaerosol Sensor observations. Under the observed atmospheric conditions, the number concentrations of WIAPs were measured with their dispersion efficiency from a filter to water of approximately 50%. These results indicate that our method based on filter sampling and complex forward-scattering amplitude measurements has the potential to become a new technique for quantifying the spatio-temporal distributions of WIAPs.

Fluorescence of solvent-extractable organics in sub-micrometer forest aerosols in Hokkaido, Japan

Excitation–emission matrix (EEM) fluorescence spectroscopy is an analytical method for obtaining the properties, components, and sources of chromophores of atmospheric organic aerosols (OA). Most studies have been limited to water-soluble OA; the chemical structures of OA associated with chromophores and the sources of chromophores are still not well understood. In this study, the fluorescence properties of solvent-extractable organic components, fractionated based on their polarity in sub-micrometer forest aerosols in Hokkaido, Japan, were characterized on the basis of their EEMs in combination with chemical structural characterization from offline aerosol mass spectrometry. The fluorescence volume normalized by the mass concentration (NFV) and the fluorescence volume (FV) corresponding to the atmospheric abundance for water-insoluble organic matter (WISOM) were higher than those of other OA fractions and highest in the winter. Correlation analyses between the NFVs and the relative intensities of ion groups from the mass spectra from a high-resolution aerosol mass spectrometer suggest that organic compounds containing O and N contributed to the fluorescence of the OA fractions. Although the fluorescence indices used to characterize aquatic dissolved organic matter exhibited comparable values for water-soluble organic matter (WSOM) in this study and in previous studies, they are not applicable in explaining the types or sources of other OA fractions. A parallel factor (PARAFAC) analysis for EEM profiles identified five components. Four components had fluorescence characteristics similar to those associated with humic-like substances (HULIS), and one had fluorescence characteristics associated with protein-like compounds (PLOM). The chromophores commonly associated with HULIS with oxygenated structures contributed significantly to respective OA fractions; this implies that for fluorescence measurements, such as the detection of primary biological aerosol particles (PBAP), contributions from oxygenated organics should be considered in the forest region.

Simulating the Transport and Rupture of Pollen in the Atmosphere

AbstractPollen, one type of primary biological aerosol particle (PBAP), is emitted from the terrestrial biosphere and can undergo physical changes in the atmosphere via particle rupture. To examine the fate of pollen and its atmospheric processing, a pollen emission and transport scheme is coupled to the Weather Research and Forecasting Model with Chemistry (WRF‐Chem). We simulate the emission of pollen and its impacts on the cloud properties and precipitation in the Southern Great Plains from 12 to 19 April 2013, a period with both high pollen emissions and convective activity. We conduct a suite of ensemble runs that simulate primary pollen and three different pollen rupture mechanisms that generate subpollen particles, including (a) high humidity‐induced surface rupture, (b) high humidity‐induced in‐atmosphere plus surface rupture, and (c) lightning‐induced rupture, where in‐cloud and cloud‐to‐ground lightning strikes trigger pollen rupture events. When relative humidity is high (>80%), coarse primary pollen (∼1 μg m−3) is converted into fine subpollen particles (∼1.2e−4 μg m−3), which produces 80% more subpollen particles than lightning‐induced rupture. The in‐atmosphere humidity‐driven rupture predominantly produces subpollen particles, which is further enhanced during a frontal thunderstorm. During strong convection, vertical updrafts lift primary pollen and subpollen particles (∼0.5e−4 μg m−3) to the upper troposphere (∼12 km) and laterally transports the ruptured pollen in the anvil top outflow. In regions of high pollen and strong convection, ruptured pollen can influence warm cloud formation by decreasing low cloud (<4 km) cloud water mixing ratios and increasing ice phase hydrometeors aloft (>10 km).

Rainfall effects on vertical profiles of airborne fungi over a mixed land-use context at the Brazilian Atlantic Forest biodiversity hotspot

Whilst fungi are a large fraction of primary biological aerosol particles (PBAPs) and their impact on global climate has been widely recognised, few studies have empirically assessed fungal vertical profiles and diversity relating those with rainfall. Here, we show the results of fungal PBAPs before and after a rainfall event during a fieldwork campaign using a hot-air balloon over a mixed land-use context at the Brazilian Atlantic Forest biodiversity hotspot. Four flights of c. 1 hour each were performed in the early morning from 8th until 11th of March 2022, and data were collected at three sampling heights (0, 150 and 300 m). Rainfall estimation using IMERG data indicated the precipitation event was of 15–20 mm and ERA5/ECMWF data highlighted that most of the airborne samples were taken above the boundary layer height. After the rainfall, the concentration of fungal spores at the ground level remained unchanged, whereas it was reduced to between 2- and 2.5-fold for the 150 and the 300 m heights, respectively. This was also accompanied by a reduction in the number of Pink-CFU, indicating a major drop in fungal PBAPs at higher altitudes associated with the rain. In addition, total spore concentration indicated Cladosporium sp. as dominant at all sampling heights, accounting for more than 80% of all spores, whereas Aspergillus/Penicillium-like represented less than 20%. Our results show the effects of rainfall and altitude on the concentration of fungal PBAPs, indicating how wet removal impacts fungi vertical profiles which has knock-on-effects on cloud and precipitation formation.

Thirty-Five Years of Aerosol–PBAP in situ Research in Brazil: The Need to Think outside the Amazonian Box

Aerosols and primary biological aerosol particles (PBAPs) play an important role in regulating the global climate, but information summarizing the available knowledge is limited. Here, we present a systematic review of in situ studies performed in the last 35 years on aerosols–PBAPs in Brazil, with 212 studies encompassing 474 cases. The Amazon rainforest was the most studied biome, represented by 72% of cases, followed by the Atlantic Forest with 18%. Studies focusing the Amazon mostly investigated climate-related issues and aerosol physics, with less than 5% examining the biological identity of aerosols, whereas outside the Amazon, this number reached 16%. Whilst more than half of the cases within Amazon (55%) were held at seven sampling sites only, conclusions were mainly extrapolated to the entire biome. Contrarily, research beyond the Amazon has mostly addressed the temporal and biological characterisation of PBAPs, and not only is it scattered, but also scarce. Regarding sampling efforts, most cases (72%) had fewer than 100 days of sampling, and 60% of them spanned less than half a year of study. We argue that scientists should produce more detailed/complete assessments of aerosols–PBAPs in Brazil as a whole, particularly considering their biological identity, given their importance to global climate regulation.

A Modified Spectroscopic Approach for the Real-Time Detection of Pollen and Fungal Spores at a Semi-Urban Site Using the WIBS-4+, Part I.

The real-time monitoring of primary biological aerosol particles (PBAP) such as pollen and fungal spores has received much attention in recent years as a result of their health and climatic effects. In this study, the Wideband Integrated Bioaerosol Sensor (WIBS) 4+ model was evaluated for its ability to sample and detect ambient fungal spore and pollen concentrations, compared to the traditional Hirst volumetric method. Although the determination of total pollen and fungal spore ambient concentrations are of interest, the selective detection of individual pollen/fungal spore types are often of greater allergenic/agricultural concern. To aid in this endeavour, modifications were made to the WIBS-4 instrument to target chlorophyll fluorescence. Two additional fluorescence channels (FL4 and FL5 channels) were combined with the standard WIBS channels (FL1, FL2, FL3). The purpose of this modification is to help discriminate between grass and herb pollen from other pollen. The WIBS-4+ was able to successfully detect and differentiate between different bioaerosol classes. The addition of the FL4 and FL5 channels also allowed for the improved differentiation between tree (R2 = 0.8), herbaceous (R2 = 0.6) and grass (R2 = 0.4) pollen and fungal spores (R2 = 0.8). Both grass and herbaceous pollen types showed a high correlation with D type particles, showing strong fluorescence in the FL4 channel. The additional fluorescent data that were introduced also improved clustering attempts, making k-means clustering a comparable solution for this high-resolution data.

Nonnegligible biogenic organic aerosol and the correlations with light absorption at three high altitude locations in the Qinghai–Tibetan Plateau

To investigate the contribution of primary biological aerosol particles (PBAPs) to aerosol and the correlations with brown carbon (BrC) light absorption over the Tibetan Plateau (TP), the total suspended particle (TSP) samples were collected at three high altitude sites. The spatial variations of PBAPs tracers and absorption Ångström exponent (AAE) were obtained over the TP for the first time. Elevated PBAPs tracers concentrations were observed in the northeastern and southwestern sites compared to the central TP. The high concentrations of FSPD OC (the fungal-spore-derived OC and plant-debris OC) and PBAPs were obtained in the northeastern (with 74 ng m−3 and 2333 ng m−3) and southwestern sites (with 80 ng m−3 and 2682 ng m−3), respectively. The results indicated that PBAPs may be important fraction of BrC chromophores in the southwestern TP. The highest AAEs of BrC, primary BrC (BrCpri), and secondary BrC (BrCsec) were observed in the northeastern site with the values of 5.1, 3.7, and 5.7, respectively. The potential PBAPs and FSPD OC source distributions were obtained. The results are important for evaluating the effects of PBAPs in the TP.

The influence of multiple groups of biological ice nucleating particles on microphysical properties of mixed-phase clouds observed during MC3E

Abstract. A new empirical parameterization (EP) for multiple groups of primary biological aerosol particles (PBAPs) is implemented in the aerosol–cloud model (AC) to investigate their roles as ice nucleating particles (INPs). The EP describes the heterogeneous ice nucleation by (1) fungal spores, (2) bacteria, (3) pollen, (4) detritus of plants, animals, and viruses, and (5) algae. Each group includes fragments from the originally emitted particles. A high-resolution simulation of a midlatitude mesoscale squall line by AC is validated against airborne and ground observations. Sensitivity tests are carried out by varying the initial vertical profiles of the loadings of individual PBAP groups. The resulting changes in warm and ice cloud microphysical parameters are investigated. The changes in warm microphysical parameters, including liquid water content and cloud droplet number concentration, are minimal (<10 %). Overall, PBAPs have little effect on the ice number concentration (<6 %) in the convective region. In the stratiform region, increasing the initial PBAP loadings by a factor of 1000 resulted in less than 40 % change in ice number concentrations. The total ice concentration is mostly controlled by various mechanisms of secondary ice production (SIP). However, when SIP is intentionally shut down in sensitivity tests, increasing the PBAP loading by a factor of 100 has an effect of less than 3 % on the ice phase. Further sensitivity tests revealed that PBAPs have little effect on surface precipitation and on the shortwave and longwave flux (<4 %) for a 100-fold perturbation in PBAPs.

Characteristics and Impact Factors of Number Concentration of Primary Biological Aerosol Particles in Beijing

Primary biological aerosol particles (PBAP) are an important part of ambient aerosols. Both living and dead organisms not only influence human health and air quality but also play important roles in regulating certain atmospheric processes and affect the hydrological cycle and climate change. In this study, flow cytometry (FCM) was utilized in combination with the simultaneous use of permeant (SYBR Green I) and impermeant (propidium iodide, PI) nucleic acid fluorescent staining to detect and quantify the viable and dead airborne biological particles. At the same time, based on this method, the dead/viable PBAP in a Beijing urban area was detected and quantified. Moreover, the influence of environmental factors on the concentrations of primary biological aerosol particles was illuminated. The results showed that the media number concentration of dead and alive PBAP in the Beijing urban area during summer (1.03×106 m-3 and 7.43×105 m-3, respectively) were higher than those during winter (7.34×105 m-3and 6.18×105 m-3, respectively). Statistical analysis showed that there was no significant correlation between PBAP number concentration and environmental factors, i.e., meteorological conditions and air quality, showing a weak positive correlation with temperature and humidity and weak negative correlations with O3, maximum wind speed, and sunshine duration. The number concentration of PBAP was weakly correlated with the mass concentration of PM2.5 but positively correlated with that of coarse particulate matter (PM2.5-10). Both stable weather and dust transport could increase the number concentration of PBAP in Beijing.

Measurement report: An exploratory study of fluorescence and cloud condensation nuclei activity of urban aerosols in San Juan, Puerto Rico

Abstract. Many atmospheric aerosols are cloud condensation nuclei (CCN), capable of activating as cloud droplets when the relative humidity exceeds 100 %. Some primary biological aerosol particles (PBAPs), such as plant spores, pollen, or bacteria, have been identified as such CCN. Urban environments are a source of these bioaerosols, some of which are naturally produced by the local flora or are transported from surrounding regions and others of which are a result of human activities. In the latter case, open sewage, uncovered garbage, mold or other products of such activities can be a source of PBAPs. There have been relatively few studies, especially in the tropics, where PBAPs and CCN have been simultaneously studied to establish a causal link between the two. The metropolis of San Juan, Puerto Rico, is one such urban area with a population of 2 448 000 people (as of 2020). To better understand the fluorescent characteristics and cloud-forming efficiency of aerosols in this region, measurements with a wideband integrated bioaerosol spectrometer (WIBS), a condensation nuclei (CN) counter and a CCN spectrometer were made at the University of Puerto Rico – Río Piedras Campus. Results show that the CCN / CN activation ratio and the fraction of fluorescing aerosol particles (FAPs) have repetitive daily trends when the FAP fraction is positively correlated with relative humidity and negatively correlated with wind speed, consistent with previous studies of fungi spores collected on substrates. The results from this pilot study highlight the capabilities of ultraviolet-induced fluorescence (UV-IF) measurements for characterizing the properties of FAPs as they relate to the daily evolution of PBAPs. The use of multiple excitation and emission wavelengths, along with shape detection, allows the differentiation of different PBAP types. These measurements, evaluated with respect to previous, substrate-based analysis of the local fungal and pollen spores, have established a preliminary database of measurements that future, longer-term studies will build upon.

The characterization and quantification of viable and dead airborne biological particles using flow cytometry and double fluorescent staining

Primary biological aerosol particles (PBAPs) are important air pollutants because they are ubiquitous in the atmosphere; influence human health, air quality, atmospheric chemistry and physics; and play important roles in regulating atmospheric processes. In investigations of the effects of PBAPs in ambient environments, it is necessary to distinguish them from other particles. In this study, flow cytometry (FCM) was utilized in combination with permeant (SYBR Green dyes) and impermeant (Propidium Iodide, PI) nucleic acid fluorescent stains, to characterize and quantify the viable and dead airborne PBAPs in ambient aerosol in Beijing, China. The number concentrations of viable and dead PBAPs showed a consistent trend and correlated well with one another (R2 = 0.72, p < 0.01). However, no relationship was found between the number concentration of PBAPs and non-biological particles. The mean number concentrations of total particulate matter, dead PBAPs and viable PBAPs were 5.78 × 106 m−3, 1.11 × 106 m−3 and 7.09 × 105 m−3, respectively. The median PBAPs number concentrations (the sum of dead and viable) exhibited a seasonal cycle, i.e., highest in summer and autumn, lowest during winter and spring. Despite a lower median PBAPs number concentration during winter compared with other seasons, the viability peaked during winter, coinciding with the winter flu season. Stable synoptic conditions, polluted southwesterly air mass and long-range transported dust from the northwest desert region all contributed to the occurrence of explosive fluorescent PBAP episodes in Beijing, China.