Wastewater In Presence Research Articles

Ecotoxicological effects of pharmaceutical preparations and the possibility of removing them through phytoremediation: A review

From several decades, there was a significant increase in the production of pharmaceuticals due to their widespread use for both animal and human health. However, these pharmaceuticals also release large amounts of waste into the water environment, where they have been found at levels of ng/l to mg/l in wastewater and surface water. Additionally, because pharmaceuticals initially have biological effects such endocrine disruption, they may have a multitude of adverse effects. Hospitals are indicated or thought to be a significant and extremely variable source that is typically released into sewers immediately, without any kind of preparation. even if they only make up a minor portion of the influents of sewage treatment plants' overall effluent volume. One of the primary sources of pharmaceuticals that are present in every area of the environment is the hospitals. These medications were transferred to wastewater treatment plants (WWTPs), which lack the necessary equipment to effectively handle these kinds of substances. Pharmaceutical contamination of water is regarded as a growing pollution issue in developed nations as these pollutants and micropollutants have been introduced into drinking water sources. In order to raise awareness among physicians, patients, and pharmaceutical manufacturers that pharmaceutical materials may have side effects outside of the patient, certain countries have implemented a classification system for pharmaceutical drugs based on their propensity to accumulate in surface water and interfere with aquatic life. This program is assessed by yearly tests of pharmaceuticals in sewage treatment effluents. The results indicate the presence of numerous types of medicines, including trimethoprim, sulfamethoxazole, and metronidazole, in all analyzed sewer treatment plant effluents. The manufacturing and consumption of pharmaceuticals appear to have an impact on their presence in wastewater.

Screening potential biomarkers for acute respiratory infectious diseases from antipyretics, antiviral, and antibiotics in wastewater

Since the onset of COVID-19, respiratory diseases have emerged as a focal concern within the field of public health. This study aims to reveal the prevalence of acute respiratory infectious diseases by screening antipyretic, antiviral, and antibiotic biomarkers through wastewater analysis. Samples were collected over a seven-day period each year in 2022, 2023, and 2024 from a northern city in China, assessing the concentrations of two antipyretics (paracetamol and ibuprofen), one antiviral drug (oseltamivir), eleven antibiotics, and three pathogens (influenza A, influenza B, and Mycoplasma pneumoniae). The usage of most antipyretics and antibiotics was higher in 2023 and 2024, primarily due to the outbreak of COVID-19 in 2023 and the prevalence of influenza A, influenza B, and Mycoplasma pneumoniae in 2024. The prevalence assessed using antipyretics (2.68 %) and pathogens (2.70 %) demonstrated a high degree of consistency, whereas the prevalence estimated using antibiotics and antiviral drugs was only 0.53 % and 0.36 %, respectively. Antibiotics are generally used to treat a broad spectrum of bacterial infections rather than targeting a specific pathogen, so their presence in wastewater may not directly reflect the prevalence of a particular disease. In contrast, antipyretics and specific pathogens exhibit a stronger correlation, suggesting that they may serve as more reliable biomarkers than antiviral and antibiotic drugs. The research findings offer alternative biomarkers, such as antipyretics, aside from pathogens, for the assessment of acute respiratory infectious diseases.

Efficiency of CaZn₂(OH)₆·2H₂O and ZnO nanoparticles in photocatalytic degradation of amoxicillin after multiple cycles

The widespread use of antibiotics has increased their presence in wastewater, largely due to inadequate removal by conventional treatment methods. This highlights a critical need for effective degradation strategies to mitigate environmental and public health risks. This study reports the photocatalytic degradation of amoxicillin (AMX) using calcium zinc hydroxide dihydrate [CaZn2(OH)6·2H2O] (CZ) and zinc oxide (ZnO) nanoparticles (NPs) synthesized by different routes. X-ray diffraction results confirmed the formation of CZ NPs with an 81–95% crystalline phase, while ZnO NPs present a single crystalline phase. The photolysis of AMX under UV-A light (365 nm) was strongly pH-dependent, with degradation rates of 34.7, 5.7, and 4.2% observed at pH 3, 5, and 13, respectively. Maximum adsorption occurred at pH 3, with ZnO achieving 63–83.2% AMX removal and 23.5–47.1% in the case of CZ. The highest overall AMX removal was observed at pH 3, where adsorption dominated the photocatalytic process for both CZ and ZnO. At pH 5 and 13, degradation was primarily driven by photocatalysis in CZ materials, particularly CZ-HT and CZ-SG, while adsorption remained predominant in ZnO. Proton nuclear magnetic resonance analysis indicates benzene ring cleavage in AMX photodegraded by CZ materials. Furthermore, the residues of photodegraded AMX by CZ materials lost antimicrobial activity against Gram-positive and Gram-negative bacteria. Additionally, the reuse of NPs over four cycles maintained consistent degradation performance, highlighting their potential for repeated applications. The comparative analysis of CZ and ZnO NPs superior photocatalytic efficiency of CZ in degrading AMX. This efficiency, along with its potential for repeated use, establish CZ as a promising material for environmental applications aimed at reducing antibiotic contamination and the associated risks of resistance development.

Adsorption of Polycyclic Aromatic Hydrocarbons from Wastewater Using Iron Oxide Nanomaterials Recovered from Acid Mine Water: A Review

Polycyclic aromatic hydrocarbons (PAHs) are a group of organic pollutants known for their persistence and potential carcinogenicity. Effective removal techniques are required since their presence in wastewater poses serious threats to human health and the environment. In this review study, iron oxide nanomaterials (IONs), a by-product of mining operations, recovered from acid mine water are used to investigate the adsorption of PAHs from wastewater. The mechanisms of PAH adsorption onto IONs are investigated, with a focus on the effects of concentration, temperature, and pH on adsorption efficiency. The better performance, affordability, and reusable nature of IONs are demonstrated by comparative studies with alternative adsorbents such as activated carbon. Economic and environmental ramifications highlight the benefits of employing recovered materials, while case studies and real-world applications show how effective IONs are in removing PAHs in the real world. This review concludes by discussing potential future developments in synthesis processes, areas for more research, and emerging trends in nanomaterial-based adsorption. This research intends to contribute to the development of more effective and sustainable wastewater treatment technologies by offering a thorough assessment of the present and future potential of employing IONs for PAH removal from wastewater.

Electrokinetics with Surface-Enhanced Raman Spectroscopy for Bacterial Identification in Wastewater

Bacterial presence in wastewater serves as a crucial bioindicator for monitoring population-level infections and offering early disease outbreak warnings [1,2]. However, identifying bacteria in wastewater presents outstanding challenges; notably, current culturing or fluorescence-based methods [3] to identify bacteria are slow and expensive, unsuitable for high-throughput screening of diverse bacterial species, and may not work well in the complex wastewater matrix. Here, we harness the potential of surface chemistry and electrokinetics to introduce an innovative electro-optical approach that has the promise to detect a broad spectrum of pathogenic bacteria in wastewater.We combine surface-enhanced Raman spectroscopy (SERS) [4] with alternating current electric fields, complemented by machine learning models [5], to enable rapid and amplification-free bacteria detection in filtered wastewater, at cell concentrations as low as 104 cells/mL. First, we synthesize gold nanorods that can electrostatically bind to bacteria surfaces, allowing for SERS from cell surfaces. We collect SERS from bacteria spiked into filtered wastewater, including Staphylococcus aureus, Staphylococcus epidermidis, and Escherichia coli, spanning concentrations from 109 cells/mL to 104 cells/mL. Spectral clustering analysis shows that bacteria signals become more indistinguishable from wastewater as the concentrations decrease. Further, we incorporate electrokinetic effects into SERS by employing gold microelectrodes to apply electric fields, utilizing dielectrophoresis [6] to rapidly displace and concentrate bacteria based on their dielectric responses within minutes. The enrichment of bacteria with nanorods is directly visualized through microscopy, resulting in Raman signal intensities increased by up to tenfold under electrical fields for bacterial concentrations ranging from 106 down to 104 cells/mL. Such enhancement may enable the detection sensitivity to reach environmentally-relevant concentrations. Moreover, employing data science analysis, we identify biologically-relevant “fingerprint” Raman peaks characterizing proteins, nucleic acids, and lipids from bacteria surfaces, allowing for rapid identification of bacteria species in wastewater. This novel method exhibits potential for generalized pathogen detection and molecular recognition in complex liquid samples, such as wastewater, blood, and seawater.[1] Hellmér, et al. Applied and environmental microbiology. (2014).[2] Keshaviah, et al. The Lancet Global Health. (2023).[3] Jahn, et al. Nature Microbiology. (2022).[4] Tadesse, et al., Nano Lett. (2020).[5] Ho, et al., Nat. Comm. (2019).[6] Pethig. John Wiley & Sons (2010).

Electrochemical Hydrogenation of Refractory Organics in Wastewater

Wastewater treatment is an essential process for the sustainable development of a society. The handling and degrading of different refractory and toxic organic pollutants heavily relies on conventional biodegradation. Herein, we developed an electrochemical hydrogenation method to enhance the biodegradability of organic substrates, which subsequently improves their availability to other biological-driven processes, namely denitrification. The strategy presents an unprecedented "kill-two-birds-with-one-stone" strategy to simultaneously deal with excessive organic components and nitrate's presence in wastewater. The strategy was discovered by comparing the biodegradability of some organic compounds and their hydrogenation forms. It was found that the hydrogenation product was much more bioavailable. Motivated by this discovery, we synthesized a carbon-supported Ru electrode by electrodepositing Ru on activated carbon cloth (ACC), named Ru/ACC. After that, 4-chlorophenol was used to optimize the experimental conditions, and Ru/ACC electrodes successfully converted 99.9% of 4-chlorophenol with an overall yield reached 90.9%. After that, the Ru/ACC electrodes proved efficient in transferring various wastewater organic pollutants. Besides, the electrochemical hydrogenation effect on biochemical degradation and denitrification was studied. It is significant for the electrochemical hydrogenation method to be applied to wastewater treatment.

Electrochemical Hydrogenation of Refractory Organic Pollutants for Wastewater Treatment

Wastewater treatment is an essential process for the sustainable development of a society. The handling and degrading of different refractory and toxic organic pollutants heavily relies on conventional biodegradation. Herein, we developed an electrochemical hydrogenation method to enhance the biodegradability of organic substrates, which subsequently improves their availability to existing biological-driven denitrification, a key step that turned NO3 - into harmless N2. The strategy presents an unprecedented "kill-two-birds-with-one-stone" method to simultaneously deal with excessive organic components, aka. Chemical Oxygen Demand (COD), and nitrate's presence in wastewater. The strategy was discovered by comparing the biodegradability of some organic compounds and their hydrogenation forms. It was found that the hydrogenation product was much more bioavailable. Motivated by this discovery, we synthesized a carbon-supported Ru electrode by electrodepositing Ru on activated carbon cloth (ACC), named Ru/ACC. After that, 4-chlorophenol was used to optimize the experimental conditions, and Ru/ACC electrodes successfully converted 99.9% of 4-chlorophenol with an overall yield reached 90.9%. After that, the Ru/ACC electrodes proved efficient in transferring various wastewater organic pollutants. Besides, the electrochemical hydrogenation effect on biochemical degradation and denitrification was studied. Our electrochemical treatment was significant for the electrochemical hydrogenation method to be applied to wastewater treatment.

New insights into chicken processing wastewater treatment: the role of the microalgae Parachlorella kessleri on nitrogen removal

ABSTRACT Microalgal Technologies have recently been employed as an alternative treatment for high nitrogen content wastewater. Nitrogen is an essential nutrient for microalgae growth, and its presence in wastewater may be an alternative source to synthetic medium, contributing to a circular economy. This study aimed to investigate the effect of using Parachlorella kessleri cultivated in wastewater from the thermal processing of chicken meat. Experiments were performed to obtain the ideal sampling site, inoculum dosage, and contact time. P. kessleri had better growth in the sample from the settling basin. Nitrogen removal was 95% (0,15 mg TNK/107 cells) in 9 days, and the final nitrogen concentration was lower than 20 mg/L, and the nitrate concentration was lower than 1 mg/L. However, during the third cycle in the kinetic assay, there was a decline in the microalgae growth, occasioned by the accumulation of nitrite (38,4 mg/L) in the inside of the cell. The study demonstrated that nitrogen concentration is directly related to the cell growth of the algae. Parachlorella kessleri efficiently removed nitrogen from chicken meat thermal processing wastewater and is a potential option for tertiary treatment and valorisation of such effluent as a nitrogen source.

Titanium dioxide nanoparticles (TiO2-NPs) effect on germination and morphological parameters in alfalfa, tomato, and pepper

Titanium dioxide nanoparticles are used in different processes, derived from this their presence in wastewater is common, concentrating in residual sludge. These residues are used as agricultural soil improvers, being a source of crop exposure. In this study, the effect of TiO2-NPs (450, 900, and 1800 mg L-1) on the germination of alfalfa, tomato, and pepper seeds was evaluated. The germination parameters were not different (p > 0.05) except for, the seed vigor index in alfalfa and pepper, and the mean germination time in tomato. The germination index was below 80% in 450 mg L-1 in tomato, which showed moderate phytotoxicity. Morphological modifications with differences (p < 0.05) were found in the three crops, mainly in the root. In tomatoes, the length of the main root, root hairs, and the width of the root tip were reduced but increased the width of the main root, piliferous zone, and the length of root hairs were. For alfalfa, root length and number of secondary roots augment. However, the stem, root tip width, and root villi were reduced. Finally, for pepper, the length, and width of the root and the piliferous zone were modified. Additionally, a concerning trend has been observed in the length of root hairs. TiO2-NPs affected germination and morphology in alfalfa, tomato and pepper seeds differently. Tomato was most negatively affected, with reduced root length and width. Alfalfa showed mixed effects, with positive impacts on some parameters but negatives on others. Pepper seeds responded positively overall, with improved germination and root length, despite some impacts on root morphology.

Geospatial Variability of Fluorescent Dissolved Organic Matter in Urban Watersheds: Relationships with Land Cover and Wastewater Infrastructure.

We investigated the fluorescent dissolved organic matter (FDOM) composition in two watersheds with variable land cover and wastewater infrastructure, including sanitary sewers and septic systems. A four-component parallel factor analysis model was constructed from 295 excitation-emission matrices recorded for stream samples to examine relationships between FDOM and geospatial parameters. The contributions of humic acid- and fulvic acid-like fluorescence components (e.g., C1, C2, C3) were fairly consistent across a 12 month period for the 27 sampling sites. In contrast, the protein-like fluorescence component (C4) and a related ratiometric wastewater indicator (C4/C3) exhibited high variability in urban tributaries, suggesting that some sites were impacted by leaking sewer infrastructure. Principal component analysis indicated that urban areas clustered with impervious surfaces and sanitary sewer density, and cross-covariance analysis identified strong positive correlations between C4, impervious surfaces, and sanitary sewer density at short lag distances. The presence of wastewater was confirmed by detection of sucralose (up to 1,660 ng L-1) and caffeine (up to 1,740 ng L-1). Our findings not only highlight the potential for C4 to serve as an indicator of nearby, compromised sanitary sewer infrastructure, but also suggest that geospatial data can be used to predict areas vulnerable to wastewater contamination.

Magnetic Chitosan for the Removal of Sulfamethoxazole from Tertiary Wastewaters.

Magnetic chitosan nanoparticles, synthesized by in situ precipitation, have been used as adsorbents to remove sulfamethoxazole (SMX), a sulfonamide antibiotic dangerous due to its capacity to enter ecosystems. The adsorption of SMX has been carried out in the presence of tertiary wastewaters from a depuration plant to obtain more realistic results. The effect of pH on the adsorption capacity significantly changed when carrying out the experiments in the presence of wastewater. This change has been explained while taking into account the charge properties of both the antibiotic and the magnetic chitosan. The composition of wastewaters has been characterized and discussed as regards its effect on the adsorption capacity of the magnetic chitosan. The models of Elovich and Freundlich have been selected to describe the adsorption kinetics and the adsorption isotherms, respectively. The analysis of these models has suggested that the adsorption mechanism is based on strong chemical interactions between the SMX and the magnetic chitosan, leading to the formation of an SMX multilayer.

Removal of fluorouracil from aqueous environment using magnetite graphene oxide modified with γ-cyclodextrin.

Fluorouracil (FU) is a widely utilized antineoplastic medication in the pharmaceutical industry for combating gastrointestinal cancers. However, its presence in wastewater originating from pharmaceutical facilities and hospital effluents has a potential effect on DNA, and cannot be efficiently eliminated through conventional treatment methods. Consequently, the adoption of advanced technologies becomes crucial for effectively treating such wastewater. Accordingly, this study investigated the efficiency of magnetite graphene oxide nanocomposite functionalized with γ-cyclodextrin for removing fluorouracil from aqueous solutions. The magnetite graphene oxide nanocomposite functionalized with γ-cyclodextrin was synthesized via the hydrothermal method. Next, the effect of pH, temperature, adsorbent content, and contact time on the fluorouracil removal efficiency was explored. Ultimately, the experimental data were matched against Langmuir, Freundlich, and Temkin isotherms and Kinetic models. Accordingly, the efficiency of the absorbent used was dependent on the pH, contact time, temperature, and initial concentration of the adsorbent. The results indicated that the maximum removal efficiency for fluorouracil was achieved within the contact time of 45 min and adsorbent content of 0.020 g. In addition, the optimal pH for removing the medicine was 7. The conditions of the adsorption process followed Langmuir isotherm with correlation coefficients of 0.992 and a quasi-second kinetic model with a correlation coefficient of 0.999, with the maximum adsorption capacity of the adsorbent synthesized for the evaluated medicine estimated as 190.9 mg/g. The results showed that the magnetite graphene oxide nanocomposite functionalized with γ-cyclodextrin could be used as an effective and available adsorbent for removing fluorouracil from pharmaceutical wastewater.

Removal of selected sulfonamides and sulfonamide resistance genes from wastewater in full-scale constructed wetlands

Sulfonamides are high-consumption antibiotics that reach the aquatic environment. The threat related to their presence in wastewater and the environment is not only associated with their antibacterial properties, but also with risk of the spread of drug resistance in bacteria. Therefore, the aim of this work was to evaluate the occurrence of eight commonly used sulfonamides, sulfonamide resistance genes (sul1–3) and integrase genes intI1–3 in five full-scale constructed wetlands (CWs) differing in design (including hybrid systems) and in the source of wastewater (agricultural drainage, domestic sewage/surface runoff, and animal runs runoff in a zoo). The CWs were located in low-urbanized areas in Poland and in Czechia. No sulfonamides were detected in the CW treating agricultural tile drainage water. In the other four systems, four sulfonamide compounds were detected. Sulfamethoxazole exhibited the highest concentration in those four CWs and its highest was 12,603.23 ± 1000.66 ng/L in a CW treating a mixture of domestic sewage and surface runoff. Despite the high removal efficiencies of sulfamethoxazole in the tested CWs (86 %–99 %), it was still detected in the treated wastewater. The sul1 genes occurred in all samples of raw and treated wastewater and their abundance did not change significantly after the treatment process and it was, predominantly, at the level 105 gene copies numbers/mL. Noteworthy, sul2 genes were only found in the influents, and sul3 were not detected. The sulfonamides can be removed in CWs, but their elimination is not complete. However, hybrid CWs treating sewage were superior in decreasing the relative abundance of genes and the concentration of SMX. CWs may play a role in the dissemination of sulfonamide resistance genes of the sul1 type and other determinants of drug resistance, such as the intI1 gene, in the environment, however, the magnitude of this phenomenon is a matter of further research.

A Review of Global Occurrence of Emerging Pollutants in Wastewater: Present Status, Source/Pathway, Extraction and Detection Techniques

The occurrence of emerging pollutants (EPs) is constantly reported around the world. Despite this, due to their large number, only a few of these compounds have been toxicologically evaluated. In this paper, the literature on EPs found in wastewater was reviewed from 1998 to 2021, with a focus on their occurrence, extraction, and detection methods. Pesticides, microplastics, pharmaceuticals and personal care products, per and polyfluoroalkyl substances were studied for their presence in wastewater in Africa, Oceania, North America, Asia, Europe and South America. The highest concentration of pesticides in wastewater was recorded in Africa (Cameroun) at concentration ranging from 2 to 2993 ng/L whilst the least was recorded in Europe (Spain) at concentrations ranging from 0.02 to 1.94 ng/L; Pharmaceuticals and personal care products had the highest concentration in Africa (Egypt) at 70.6 to 119.4 mg/L whilst the least concentration was found at 0.1 to 646 ng/L in Africa (Tunisia); Per and polyfluoroalkyl substances had the highest concentration in Asia (Thailand) at 662 to 1383 ng/L while the least concentration was found to be in the range 0.2 to 48.6 ng/L in Europe (Denmark); Microplastics were also recorded in this study to have the highest concentration in the range 28.4 to 79.9 particles/L in Asia (China) and the least concentration in the range 0.0008 particles/L in North America (USA). Reliable analytical extraction and detection methods were the solid phase extraction and high-performance liquid chromatography coupled to different detectors respectively, and they were employed for the pesticides, pharmaceuticals and personal care products, per and polyfluoroalkyl substances only whilst the extraction and detection methods employed for the microplastics were filtration and digestion techniques followed by the FT-IR detection method. EPs were more prevalent in the African continent as a result of various socio-economic issues that led to poor sanitation systems and drastic shortages in wastewater treatment plants in many regions, making it difficult to tackle the problem of emerging pollutants.

The Impact of the Elemental Interactions on Soil Fertility and Toxicity in the Presence of Wastewater and Biosolids: A Quantitative Evaluation

A field experiment was conducted in Mesologgi, Greece, for the study of the elemental contribution to the soil under the following treatments in four replications i.e.,: a—Wastewater (TMWW), b—Biosolid (BSD), c—(TMWW + BSD) and d—CONTROL (fresh irrigation water). Similarly, the data of a greenhouse experiment conducted in four replications in Agrinion, under the effect of wastewater and biosolids was also taken into account for reasons of comparison. The soil analytical data of these two experiments were chosen to study the elemental interactions under two different experimental conditions The actual scope was the use of the elemental interactions as a tool for the evaluation of their contribution in terms of plant nutrients, and heavy metals to soil fertility and of heavy metals to soil toxicity. Based on the results of elemental contributions obtained for both of the above experimental soils, the key role of elemental interactions as a tool in evaluating the contributed heavy metals, and essential nutrients, as well as in producing quantitative changes in the physical and chemical properties of soil (pH, organic matter, calcium carbonate, and electrical conductivity), was also, studied. According to the obtained results, it was shown that the elemental interactions have shown approximately the same quantitative trend between some of the results obtained, differing in some others, showing higher concentrations. In other words, it was shown that the elemental interactions could be used as an effective tool for the quantitative evaluation of the elemental interactions’ contribution in terms of nutrients to soil fertility, and of heavy metals to soil toxicity, under the reuse of wastewater and biosolids, as well as in terms of changes of the soil physical and chemical properties. However, due to the complex nature of this subject, more detailed research must be conducted on the elemental contributions, so that the plant nutrients, or the heavy metals, eventually be managed effectively to the benefit of the agricultural economy and environmental quality.

Green wastewater treatment of repurposed COVID-19 therapy (levofloxacin) using synthesized magnetite pectin nanoparticles, comparison with mesoporous silica nanoparticles

RationaleAntibiotics have been detected worldwide in the aquatic environment. Moreover, certain classes of antibiotics have been repurposed for the management of COVID-19, which increased their use and presence in wastewater. Their occurrence even in low concentrations leads to the development of antibiotic resistance.MethodologyMagnetite pectin nanoparticles (MPNP) were fabricated and compared to an established model of mesoporous silica nanoparticles (MSNP). Our studied adsorbate is levofloxacin, a fluoroquinolone antibiotic, commonly used in managing COVID-19 cases.ResultsThe influence of various factors affecting the adsorption process was studied, such as pH, the type and concentration of the adsorbent, contact time, and drug concentration. The results illustrated that the optimum adsorption capacity for antibiotic clearance from wastewater using MPNP was at pH 4 with a contact time of 4 h; while using MSNP, it was found to be optimum at pH 7 with a contact time of 12 h at concentrations of 10 µg/mL and 16 g/L of the drug and nanoparticles, respectively, showing adsorption percentages of 96.55% and 98.89%. Drug adsorption equilibrium data obeyed the Sips isotherm model.Discussion and conclusionHPLC assay method was developed and validated. The experimental results revealed that the MPNP was as efficient as MSNP for removing the antibacterial agent. Moreover, MPNP is eco-friendly (a natural by-product of citrus fruit) and more economic as it could be recovered and reused. The procedure was evaluated according to the greenness assessment tools: AGREE calculator and Hexagon-CALIFICAMET, showing good green scores, ensuring the process’s eco-friendliness.

Unveiling the interactions between biomaterials and heterocyclic dyes: A sustainable approach for wastewater treatment

The present Review investigates the interactions between biomaterials and heterocyclic dyes, focusing on their potential application in sustainable wastewater treatment. Heterocyclic dyes are widely used in various industries, resulting in their widespread presence in wastewater, posing environmental challenges. This review explores the utilization of biomaterials as adsorbents for the removal of heterocyclic dyes from contaminated water sources. The interactions between biomaterials, such as cellulose, microfibrilated cellulose and lignin and different heterocyclic dyes are examined through reported experimental analysis and characterization techniques. The study evaluates the adsorption capacity, kinetics, and thermodynamics of the biomaterial-dye systems to elucidate the underlying mechanisms and optimize the treatment process. The review highlight the promising potential of biomaterial-based approaches for sustainable wastewater treatment, providing insights for the development of efficient and environmentally friendly dye removal technologies.

Occurrence and prevalence of antibiotics in wastewater treatment plants and effluent receiving rivers in South Africa using UHPLC-MS determination

The increased usage of antibiotics over the recent years has led to an increased interest in monitoring their presence in wastewater all over the world. In this study the occurrence of sixteen (16) selected antibiotics (amoxicillin, ampicillin, azithromycin, ciprofloxacin, doxycycline, erythromycin, gentamicin, metronidazole, norfloxacin, ofloxacin, penicillin, sulfamethoxazole, sulfapyridine, sulfamethizole, tetracycline and trimethoprim) were determined in two wastewater treatment plants and two effluent receiving rivers in Northern part of Pretoria, South Africa. Targeted screening and identification of antibiotics was done using ultra high-performance liquid chromatography coupled with mass spectrometry after sample clean-up and pre-concentration using solid phase extraction. The concentrations of the targeted antibiotics detected in influent samples ranged between 0.78 and 96.8 ng mL−1 and those in effluent were between 0.12 and 9.89 ng mL−1. The highest recorded concentrations in all samples were those of doxycycline (30.9–120 ng mL−1) and sulfamethoxazole (2.52–96.8 ng mL−1) in effluent and influent samples, respectively. The concentrations of antibiotics in the rivers receiving effluents were between 0.03 and 72.8 ng mL−1 in upstream samples and 0.008–76.8 ng mL−1 in downstream samples, indicating that there is other source of contaminate to these rivers other than the treatment plants. Risk assessment using the hazard quotients ranged between 0.24 and 889 indicating that the presence of these antibiotics and antibiotic mixtures posed higher ecological risks to aquatic organisms. From the study, it could be concluded that wastewater treatment plants were releasing antibiotics to the environment and posing a risk to the aquatic ecosystem and public health. Therefore, there is a need to research into developing more efficient conventional wastewater treatment technologies that can completely remove antibiotics from wastewater.

Newly Discovered Irbesartan Disinfection Byproducts via Chlorination: Investigating Potential Environmental Toxicity

Irbesartan belongs to the Sartan family, whose members are used in the treatment of arterial hypertension and kidney disease among patients with hypertension and type 2 diabetes mellitus as part of a treatment based on antihypertensive drugs. This drug has reached surface waters, accumulating to the extent of being considered an emerging pollutant, along with other substances from the same class. Wastewater treatment plants, which constitute the main environmental source of this compound, fail to completely reduce its presence in wastewater and generate additional toxic byproducts through the chlorine-based disinfection process. This study provides a comprehensive investigation into the chlorination mechanisms of irbesartan, revealing the identity of twelve new byproducts, which were characterized using NMR and mass spectrometry (MS-TOF). The other six byproducts were published in a previous study, allowing for the confirmation of some aspects of the supposed mechanisms of degradation, along with the identification of those that had only been hypothesized. An ecotoxicological assessment of a mixture and isolated byproducts was performed using Raphidocelis subcapitata for algal growth inhibition, Daphnia magna for immobility, and Aliivibrio fischeri for luminescence inhibition. The results revealed the variable toxicity of irbesartan and its byproducts. Different organisms exhibited varying sensitivities to the byproducts, with Aliivibrio fischeri being the most sensitive. The coexistence of multiple byproducts in the environment, their high toxicity, and their potential interactions highlight the significant environmental risks associated with chlorination and its derivates. Our study highlights the ongoing debate surrounding the generation of disinfection byproducts.

Utilizing anthropogenic compounds and geochemical tracers to identify preferential structurally controlled groundwater pathways influencing springs in Grand Canyon National Park, Arizona, USA

Study regionThis study focuses on the Colorado River watershed in the area along the South Rim of the Grand Canyon. Study focusThis study utilizes anthropogenic chemical tracers to investigate the fate of treated wastewater effluent discharged within Grand Canyon National Park. Anthropogenic chemical tracers were used to discern preferential structurally controlled pathways in a complex regional network of faults and fractures in which some are conduits and others barriers to flow. New hydrological insights for the regionPrevious investigations on water resources of Grand Canyon have suggested two different discharge locations (Garden Springs versus Monument Spring) for the treated wastewater discharged on the South Rim of Grand Canyon yet the presence of wastewater at the springs remained unstudied for decades. The treated wastewater from Grand Canyon Village is released into Bright Angel Wash that flows along the surface expression of the Bright Angel Fault and past the inferred intersection with the perpendicular Monument Fault. Multiple anthropogenic compounds (pharmaceuticals, per- and polyfluoroalkyl substances (PFAS), and elevated nitrate) were found in Bright Angel Wash and Monument Spring. Stable isotopic measurements at Monument Spring show depletion over time also suggesting contribution from a depleted stable isotopic source found in the treated wastewater. The anthropogenic tracers utilized in this study provide good insight to which geologic structures are conduits versus barriers to flow and can be useful in other fracture flow and karst settings.