Presence Of Various Metal Ions Research Articles

Tripeptide-Assisted Gold Nanocluster Formation for Fe3+ and Cu2+ Sensing

Fluorescent gold nanoclusters (AuNCs) have shown promise as metal ion sensors. Further research into surface ligands is crucial for developing sensors that are both selective and sensitive. Here, we designed simple tripeptides to form fluorescent AuNCs, capitalizing on tyrosine’s reduction capability under alkaline conditions. We investigated tyrosine’s role in both forming AuNCs and sensing metal ions. Two tripeptides, tyrosine–cysteine–tyrosine (YCY) and serine–cysteine–tyrosine (SCY), were used to form AuNCs. YCY peptides produced AuNCs with blue and red fluorescence, while SCY peptides produced blue-emitting AuNCs. The blue fluorescence of YCY- and SCY-AuNCs was selectively quenched by Fe3+ and Cu2+, whereas red-emitting YCY-AuNC fluorescence remained stable with 13 different metal ions. The number of tyrosine residues influenced the sensor response. DLS measurements revealed different aggregation propensities in the presence of various metal ions, indicating that chelation between the peptide and target ions led to aggregation and fluorescence quenching. Highlighting the innovation of our approach, our study demonstrates the feasibility of the rational design of peptides for the formation of fluorescent AuNCs that serve as highly selective and sensitive surface ligands for metal ion sensing. This method marks an advancement over existing methods due to its dual capability in both synthesizing gold nanoclusters and detecting analytes, specifically Fe3+ and Cu2+.

Metal-organic frameworks constructed with base-acid mixed ligands and its potential as dual-functional fluorescent probe toward Fe3+/Al3+ ions

By virtue of mixed ligand strategy (2,5-Bis(1H-pyrazole-4-ylmethylene)-cyclopentanone and 2,5-dihydroxyterephthalic acid / terephthalic acid), four new metal–organic frameworks (MOFs) were fabricated and characterized. When 2,5-dihydroxyterephthalic acid acted as auxiliary ligand, MOFs 1–3 show 1D chain structure. 4 containing auxiliary ligand terephthalic acid (without − OH group) displays a 2D layer structure. Notably, 1 exhibits the significant selectivity toward Fe3+ and Al3+ ions, whereas the fluorescence intensity of 4 changed slightly in the presence of various metal ions, indicating that uncoordinated –OH in 1 plays an important role in sensing process. Moreover, it is revealed that 1 could act as dual-functional fluorescent probe toward Fe3+ and Al3+ with selectivity, sensitivity and reusability, and it could be prepared as fluorescent test papers for rapid on-site detection.

A facile green synthesis of photoluminescent carbon dots using Pumpkin seeds for ultra-sensitive Cu2+ and Fe3+ ions detection in living cells

A facile and efficient green synthesis of photoluminescent carbon dots (CDs) was achieved using pumpkin seeds (PS) through the hydrothermal-carbonization method. Pumpkin seeds, well-known for their nutrient-rich composition, offer potential health benefits, including heightened fertility, enhanced heart health, and improved blood sugar regulation. The as-synthesized PS-CDs characterization through UV–vis, photoluminescence (PL), FTIR, XRD, and HR(TEM) analysis. The PL PS-CDs exhibited an excitation-dependent behavior, with the peak shifting from 410 nm to 475 nm under excitation wavelengths ranging from 270 nm to 400 nm. Notably, the synthesized PS-CDs displayed outstanding advantages, such as a high fluorescent quantum yield of 12.7 % with bright blue emissions when exposed to UV light at 365 nm. High-resolution TEM images revealed an average size of approximately 4.0 ± 0.2 nm for the synthesized PS-CDs, ranging from 2 to 7 nm with interlayer distance of 0.21 nm. PL spectra of PS-CDs solution, with an excitation wavelength of 338 nm and emission wavelength of 420 nm, were examined in the presence of various metal ions (50 μM). The fluorescence lifetime of the PS-CDs showed an exponential curve, with an average lifetime (τav) of 8.47 ns for Cu2+and 3.61 ns for Fe3+ ions, respectively, which is strongly indicates that quenching occurs through a static mechanism. The PS-CDs exhibited high sensitivity and selectivity towards Cu2+ and Fe3+ ions, with a linear relationship observed up to a concentration of 50 μM and detection limits of 0.43 and 0.11 μM (S/N = 3), respectively. Moreover, the low-toxicity and strongly fluorescent PS-CDs were successfully applied for cell imaging. The practical utility of the developed sensor was determined through the analysis of Cu2+ and Fe3+ ions in spiked water samples, highlighting its considerable analytical and bioanalytical applications.

Metal Ion Responsive Luminescent Bio-templated Co-assemblies: Label-Free Detection of Multi-Metal Ions in Aqueous Media.

Recently, anionic bio-templates have emerged as promising platforms for designing dynamic and stimuli-responsive chromophoric assemblies capable of light harvesting in aqueous media thereby mimicking natural photosynthesis. Here, we present multi-metal ion-responsive luminescent co-assemblies between cationic pyrene-imidazolium amphiphile and anionic bio-templates (ATP, heparin, and DNA) in aqueous media. The anionic bio-templates enhance Förster resonance energy transfer (FRET) in the co-assemblies, with pyrene serving as an excellent donor for generating tunable multi-luminescent materials with embedded acceptor dyes. However, a significant loss in energy transfer towards acceptor dyes was observed in the presence of various metal ions, attributed to excimeric emission quenching facilitated by electron transfer between the pyrene chromophore and metal ions. Interestingly, detailed studies revealed that only ATP-based co-assemblies exhibited quenching phenomena in the presence of metal ions, contrasting with heparin and ctDNA co-assemblies. Additionally, label-free detection of multi-metal ions in aqueous environments, such as Fe2+, Fe3+, and Cu2+ ions, was successfully achieved with lower detection limits of 0.01 μM (3 ppb), 0.12 μM (30 ppb), and 0.58 μM (150 ppb) respectively. These co-assemblies hold significant promise for practical applications in environmental and biomedical sensing, enabling sensitive monitoring of metal ion concentrations.

Coumarin derivative-functionalized nanoporous silica as an on–off fluorescent sensor for detecting Fe3+ and Hg2+ ions: a circuit logic gate

A highly efficient fluorescent sensor (S-DAC) was easily created by functionalizing the SBA-15 surface with N-(2-Aminoethyl)-3-Aminopropyltrimethoxysilane followed by the covalent attachment of 7-diethylamino 3-acetyl coumarin (DAC). This chemosensor (S-DAC) demonstrates selective and sensitive recognition of Fe3+ and Hg2+ in water-based solutions, with detection limits of 0.28 × 10–9 M and 0.2 × 10–9 M for Hg2+ and Fe3+, respectively. The sensor’s fluorescence characteristics were examined in the presence of various metal ions, revealing a decrease in fluorescence intensity upon adding Fe3+ or Hg2+ ions at an emission wavelength of 400 nm. This sensor was also able to detect ferric and mercury ions in spinach and tuna fish. The quenching mechanism of S-DAC was investigated using UV–vis spectroscopy, which confirmed a static-type mechanism for fluorescence quenching. Moreovre, the decrease in fluorescence intensity caused by mercury and ferric ions can be reversed using trisodium citrate dihydrate and EDTA as masking agents, respectively. As a result, a circuit logic gate was designed using Hg2+, Fe3+, trisodium citrate dihydrate, and EDTA as inputs and the quenched fluorescence emission as the output.Graphic abstract

Heterologous expression and characterization of a novel thermostable and alkali stable recombinant lipase enzyme from Bacillus thuringensis into E. coliBL21(DE3) for detergent formulation

AbstractPresent study concerned with expression and biochemical characterization of lipase enzyme for potential use in detergent formulation. Lipase gene (1242 bp) of Bacillus thuringensis was cloned and expressed in Escherichia coli BL21 strain using pET‐21a(+) expression vector. Maximum expression of cloned lipase gene was obtained at 37°C with an induction of 0.4 mM IPTG (Isopropyl ß‐D‐1‐thiogalactopyranoside) after 4 h of induction. Recombinant lipase was purified to homogeneity using immobilized metal ion affinity chromatography carrying 109.80 U/mg specific activity with 38.79 purification folds. Molecular mass of purified lipase was determined as 45 kDa using sodium dodecyl sulfate‐polyacrylamide gel electrophoresis. Purified recombinant lipase showed stability up to 90°C and retained significant activity (52%) after 4 h at 90°C. It was also found to be stable at a wide range of pH and in the presence of higher concentrations of several inhibitors (sodium dodecyl sulfate, dimethylsulfoxide, sodium azide, β‐mercaptoethanol, polysorbate 80, dithiothreitol) as well as organic solvents (acetone, methanol, ethanol, isopropanol, n‐butanol). The activity of recombinant lipase was enhanced in the presence of various metal ions and activated up to 200% by Ca2+. The compatibility of recombinant lipase with commercial detergents and other additives as well as its broad substrate specificity endorse the potential application of this enzyme in detergent formulations.

The co-adsorption of sulfate and metal ions on Al-doped graphene: a first principles study.

The co-adsorption of sulfate and metal ions on intrinsic and Al-doped graphene is investigated through first principles calculations. When SO42- ions exist only, both of intrinsic and Al-doped graphene can form stable adsorption configurations with SO42-. However, the presence of Cu2+/Ca2+/Zn2+/Mg2+ ions attenuates the interaction between intrinsic graphene and SO42-, resulting in weak physical adsorption between them, while Al-doped graphene can still constitute co-adsorption chemically with both SO42- and Cu2+/Ca2+/Zn2+/Mg2+ ions simultaneously. The sensitivity of Al-doped graphene towards co-adsorbed ions is in the order of SO42--Cu2+ > SO42--Zn2+ > SO42--Ca2+ > SO42--Mg2+. The research indicates Al-doped graphene could be a promising material for sensing sulfate ions under the presence of various metal ions. All of the calculations were carried out by using a first principles method based on density functional theory (DFT). The generalized gradient approximation (GGA) with the Perdew-Burke-Ernzerhof (PBE) functional was selected to describe electron exchange-correlation energy. The double numerical plus polarization (DNP) was employed as the basis set. The conductor-like screening model (COSMO) was implemented to simulate the aqueous solvent effect.

Fluorescent turn-off sensor for Cu2+ and Fe3+ ions in 100% aqueous media with a biocompatible polymer

A sensitive analytical method using an acridinium derivative in 100% aqueous media to detect Cu (II) and Fe (III) ions been developed. The photophysical properties of a thiophene-phenylanilide-acridinium triad (TPA) in acidic poly(methylacrylic acid) (PMAA) solution are altered in the presence of various metal ions. While dye/PMAA mixtures in acidic condition emit strongly at around 540 nm, Fe3+ and Cu2+ ions can each quench the charge shift state (CSH) emission significantly. The linear range of response to Cu2+ is 1 to 9.0 μM and to Fe3+ is 4 to 68 μM. The detection limit is 0.11 μM for Cu2+ ions and 0.60 μM for Fe3+ ions. Stern-Volmer plots showed more than one quenching mechanism for Fe3+ ions and the Benesi-Hilderbrand plot indicates a 1:1 binding ratio between dye/PMAA mixture and metal ions. While Cd2+ and Hg2+ ions interfere with the quenching, addition of iodide ions completely resolves the interference problem for both ions. The quenching by Fe3+ ions involved the inner-filter effect and partial removal of dye molecules from the hydrophobic interior of PMAA due to competitive binding. The quenching by Cu2+ ions is likely due to photoinduced electron transfer from the charge shift state of dye molecules to the partly filled d-orbitals of Cu2+ ions, leading to weaker CSH emission. Computer simulation supports the model in which dye molecules incorporate into the hydrophobic pockets formed due to the coordination of Cu2+ ions with carboxyl groups on PMAA chains.

Purification and characterization of lipase enzyme from endophytic Bacillus pumilus WSS5 for application in detergent industry

Lipolytic enzymes from endophytic microbes have been the focus of intense and growing research in view of the applicability of such enzymes in various industrial applications and endophytic microorganisms may emerge as a potential source of lipases with distinct characteristics. The current work involved purification and characterization of the lipase from an endophytic-bacteria isolated from the stem of Withania somnifera L. Dunal. Based on the analysis of morphology and 16S rDNA sequence, the endophytic bacteria was identified as Bacillus pumilus and designated as B. pumilus WSS5. Purified lipase from the B. pumilus WSS5 was found to be of 27KDa as revealed by SDS-PAGE with optimum activity at 37 °C and pH 8. The stability of the enzyme in presence of various metal ions, surfactants, inhibitors, and organic solvents suggested that this enzyme could be exploited in leather and detergent industries. In addition, the stain removal potential of the crude and purified lipase was determined on cotton fabric pieces stained with vegetable oil. Lipase added to water along with detergent significantly enhanced the stain removal efficiency of a commercially available detergent. The current findings suggest the potential of B. pumilusWSS5 lipase owing to promising properties such as the alkali-thermostability, organic solvent-tolerance, and broad substrate specificity that makes it a strong candidate for application in detergent formulations, biotransformation, industries, and medicine. To our knowledge, this is the first report on the purification and characterization of lipase from bacterial endophyte isolated from the stem of Withania somnifera L. Dunal.

Tetraphenylethylene Based Fluorescent Chemosensor for the Selective Detection of Explosive Nitroaromatic Compounds

AbstractHerein, we have reported a tetraphenylethylene (TPE) based fluorescent chemosensor 4,4′,4′′,4′′′‐(ethene‐1,1,2,2‐tetrayl)tetrakis(N,N‐dimethylaniline) (TPE‐DMA) for the selective detection of explosive nitroaromatic compounds (NACs), such as 2, 4, 6‐trinitrophenol also called as picric acid (PA), 2,4‐dinitrophenol (DNP), and p‐nitrophenol (NP) over other NACs in CHCl3. TPE‐DMA is highly selective and sensitive toward PA in presence of various metal ions and anions. The quenching efficiency can be calculated from the Stern‐Volmer equation and was found to be 4.02×104 M−1, 1.82×104 M−1and 3.12×104 M−1 respectively for PA, DNP and NP. The detection limit of TPE‐DMA towards PA, DNP and NP of about 4.088×10−6 M, 5.155×10−6 M and 3.989×10−6 M respectively. Furthermore, to study the practical applicability of TPE‐DMA, visual‐eye detection was performed not only in solid‐state on TLC plates but also in solution state in CHCl3 under visible light as well as UV light illumination.

A new benzeneacetic acid derivative-based sensor for assessing thorium (IV) in aqueous solution based on aggregation caused quenching (ACQ) and aggregation induced emission (AIE)

Herein a new benzeneacetic acid derivative-based luminescence sensor (2-[(2,6-dichlorophenyl)amino] benzeneacetic acid, monopotassium salt) (BA) for assessing Thorium (IV) [Th4+] in aqueous solution is introduced. In the presence of various metal ions, the BA sensor exhibits good selectivity for Th4+ ions that ranged from 0.01 µM to 0.2 µM, with a detection limit of 0.0104 µM in EtOH:H2O (v/v = 3:7) solution. The stoichiometry and the binding ability of BA ligand with Th4+ ions were studied by Job's, Hill's and modified Benesi–Hildebrand plots. The binding mode of BA ligand with Th4+ ions is 2:1. Interaction properties and the fluorescent mechanism between the BA ligand and Th4+ ions were investigated by 1HNMR, MS, FTIR and density functional theory (DFT). Furthermore, this study showed that combining the photophysical effects of aggregation caused quenching (ACQ) and aggregation induced emission (AIE) might give the benefits of reduced noise and increased signal when developing a simple luminescent sensor in aqueous environment.

First enzymological characterization of selenocysteine β-lyase from a lactic acid bacterium, Leuconostoc mesenteroides.

We succeeded in expressing selenocysteine β-lyase (SCL) from a lactic acid bacterium, Leuconostoc mesenteroides LK-151 (Lm-SCL), in the soluble fractions of Escherichia coli Rosetta (DE3) using a novel expression vector of pET21malb constructed by ourselves that has both maltose binding protein (MBP)- and 6 × His-tag. Lm-SCL acted on L-selenocysteine, L-cysteine, and L-cysteine sulfinic acid but showed a high preference for L-selenocysteine. The kcat and kcat/Km values of Lm-SCL were determined to be 108 (min-1) and 42.0 (min-1・mM-1), respectively, and this was enough catalytic efficiency to suggest that Lm-SCL might also be involved in supplying elemental selenium from L-selenocysteine to selenoproteins like other SCLs. The optimum temperature and optimum pH of Lm-SCL were determined to be 37°C and pH 6.5, respectively. Lm-SCL was stable at 37-45°C and pH 6.5-7.5. Lm-SCL was completely inhibited by the addition of hydroxylamine, semicarbazide, and iodoacetic acid. The enzyme activity of Lm-SCL was decreased in the presence of various metal ions, especially Cu2+. The quaternary structure of Lm-SCL is a homodimer with a subunit molecular mass of 47.5kDa. The similarity of the primary structure of Lm-SCL to other SCLs from Citrobacter freundii, Escherichia coli, humans, or mouse was calculated to be 47.0, 48.0, 12.5, or 24.0%, respectively. Unlike Ec-SCL, our mutational and molecular docking simulation studies revealed that C362 of Lm-SCL might also catalyze the deselenation of L-selenocysteine in addition to the desulfuration of L-cysteine.

Manipulating Assemblies in Metallosupramolecular Gels, Driven by Isomeric Ligands, Metal Coordination, and Adaptive Binary Gelator Systems.

Metallosupramolecular gel (MSG) is a unique combination of metal-ligand coordination chemistry and supramolecular gel chemistry with extraordinary adaptivity and softness. Such materials find broad uses in industry, pharmaceutical and biomedical sectors, and in technology generation among many others. Pyridyl-appended bis(urea) gelator systems have been extensively studied as potential MSG-forming materials in the presence of various metal ions. The previous molecular engineering approaches depicted competitive intermolecular and intramolecular binding modes involving urea and pyridyl groups and further fine-tuned by the presence of various molecular spacers. In those studies, formation of intermolecular hydrogen bonding among urea moieties to form urea tape was found to be the key factor in one-dimensional assembly and gel formation. In the present study, we show how two isomeric pyridyl-appended bis(urea) ligands can be designed appropriately to essentially eliminate the interference of competitive factors, leaving the intermolecular urea assembly practically unaffected even in the presence of metal ions. We found that one of the two ligands (L2) and the mixed ligand (L1 + L2) assemblies formed gel in the presence and absence of various metal ions. A metal ion with a linear coordination geometry significantly strengthened the gels. Moreover, an inherently weak L1 + L2 assembly appears to be more adaptive in accommodating larger metal ions especially with nonlinear coordination geometry preferences. Small-angle neutron scattering and rheological, spectroscopic, and morphological characterizations, collectively, capture a detailed interplay among ligand assembly, metal-ligand coordination, and adaptivity, driven by the pure versus mixed ligand assemblies. The knowledge gathered from the present study would be highly beneficial in engineering the metallosupramolecular polymeric assemblies toward their functional applications.

Simultaneous hydrolysis of various protein-rich industrial wastes by a naturally evolved protease from tannery wastewater microbiota

Elimination of protein-rich waste materials is one of the vital environmental protection requirements. Using of non-naturally occurring chemicals for their remediation properties can potentially induce new pollutants. Therefore, enzymes encoded in the genomes of microorganisms evolved in the same environment can be considered suitable alternatives to chemicals. Identification of efficient proteases that can hydrolyze recalcitrant, protein-rich wastes produced by various industrial processes has been widely welcomed as an eco-friendly waste management strategy. In this direction, we attempted to screen a thermo-halo-alkali-stable metagenome-derived protease (PersiProtease1) from tannery wastewater. The PersiProtease1 exhibited high pH stability over a wide range and at 1 h in pH 11.0 maintained 87.59% activity. The enzyme possessed high thermal stability while retaining 76.64% activity after 1 h at 90 °C. Moreover, 65.34% of the initial activity of the enzyme remained in the presence of 6 M NaCl, showing tolerance against high salinity. The presence of various metal ions, inhibitors, and organic solvents did not remarkably inhibit the activity of the discovered protease. The PersiProtease1 was extracted from the tannery wastewater microbiota and efficiently applied for biodegradation of real sample tannery wastewater protein, chicken feathers, whey protein, dehairing sheepskins, and waste X-ray films. PersiProtease1 proved its enormous potential in simultaneous biodegradation of solid and liquid protein-rich industrial wastes based on the results.

A Membrane‐Supported Bifunctional Poly(amidoxime‐ethyleneimine) Network for Enhanced Uranium Extraction from Seawater and Wastewater

Uranium extraction from natural seawater and wastewater are quintessential requirements to supply uninterrupted carbon-free nuclear energy and to prevent potential radiochemical and toxicological effects, respectively. Owing to the complexity and low-concentration uranium of these water samples, the design and synthesis of sorbent materials for uranium extraction with meaningful efficiencies remains a grand challenge. Herein, we reported a novel three-dimensional bifunctional network of hyperbranched poly(amidoxime-ethyleneimine) (PAO-h-PEI) using PEI as the skeleton material via cyanoethylation, crosslinking and then amidoximation. As a result of the synergistic supramolecular strategy, the PAO-h-PEI membrane achieved a remarkable adsorption capacity of 985.7 mg/g for aqueous uranium solution, which was 2.5 folds that of the monofunctional h-PEI membrane (387.6 mg/g). The PAO-h-PEI membrane also exhibited good selectivity towards uranium in the presence of various metal ions, high-content salt, and natural organic matter as well as common anions. According to the XPS and FTIR results, the utilization of amines as the second ligand enhanced uranyl binding by providing additional coordination sites or by interacting with oxime to force N-OH dissociation. The good reusability (adsorption rate of 93% after six adsorption-desorption cycles) and satisfactory adsorption performance in extracting low-concentration uranium in real seawater demonstrate its practicability.

Iron (III)-mediated degradation of α-asarone and characterization of its major degradation products by UPLC-MS/MS and NMR.

α-Asarone, the main bioactive phytochemicals of Acorus species, is widely used in the treatment of respiratory disorders. The solution stability study of α-asarone was investigated in the presence of various metal ions. α-Asarone was found to be unstable in the presence of the metal ions Fe3+, Cu2+ and Al3+, in which the induction of Fe3+ was highly prone to the degradation of α-asarone. Thus, an iron (III)-mediated forced degradation study of α-asarone was carried out. One oxidative and four dimeric products were formed after the degradation of α-asarone. The complete mass fragmentation patterns for α-asarone and its degradation products (DPs) were established by UPLC-MS/MS in the positive ionization mode, and their structural confirmation was accomplished with 1H and 13C NMR. Then, the mechanistic pathways for the formation of all DPs were postulated. Finally, the oxidation degradation behavior and mechanism of α-asarone in the presence of oxidative stressors viz., hydrogen peroxide and azobisisobutyronitrile were explored.

Raffinose Capped Silver Nanoparticles: A New Localized Surface Plasmon Resonance Based Sensor for Selective Quantification of Cr(VI) in Waste Waters.

In this study, a new method for selective determination of Cr(VI) in water samples at pH 4 is presented using raffinose capped silver nanoparticles (Ag/Raff NPs) as an optical sensor. The method is based on the variation of LSPR absorption band intensity as a result of electrostatic interaction between the negatively charged Ag/Raff NPs and positive Cr(III) ions, in-situ produced by chemical reduction of Cr(VI) with ascorbic acid, combined with the fast kinetics of Cr(III) coordination to the –OH groups of the capping agent on the nanoparticle surface, further causing the nanoparticle aggregation. The calibration curve for Cr(VI) is linear in the range 2.5–7.5 μmol L−1, the limit of quantification achieved is 1.9 μmol L−1, and values of relative standard deviation vary from 3 to 5% for concentration level 1.9–7.5 μmol L−1. The interference studies performed in the presence of various metal ions show very good selectivity of Ag/Raff NPs toward Cr(VI) species. The added–found method is used to confirm the accuracy and precision of developed analytical approach.

Highly Efficient Computationally Derived Novel Metagenome α-Amylase With Robust Stability Under Extreme Denaturing Conditions.

α-Amylases are among the very critical enzymes used for different industrial purposes. Most α-amylases cannot accomplish the requirement of industrial conditions and easily lose their activity in harsh environments. In this study, a novel α-amylase named PersiAmy1 has been identified through the multistage in silico screening pipeline from the rumen metagenomic data. The long-term storage of PersiAmy1 in low and high temperatures demonstrated 82.13 and 71.01% activities after 36 days of incubation at 4 and 50°C, respectively. The stable α-amylase retained 61.09% of its activity after 180 min of incubation at 90°C and was highly stable in a broad pH range, showing 60.48 and 86.05% activities at pH 4.0 and pH 9.0 after 180 min of incubation, respectively. Also, the enzyme could resist the high-salinity condition and demonstrated 88.81% activity in the presence of 5 M NaCl. PersiAmy1 showed more than 74% activity in the presence of various metal ions. The addition of the detergents, surfactants, and organic solvents did not affect the α-amylase activity considerably. Substrate spectrum analysis showed that PersiAmy1 could act on a wide array of substrates. PersiAmy1 showed high stability in inhibitors and superb activity in downstream conditions, thus useful in detergent and baking industries. Investigating the applicability in detergent formulation, PersiAmy1 showed more than 69% activity after incubation with commercial detergents at different temperatures (30–50°C) and retained more than 56% activity after incubation with commercial detergents for 3 h at 10°C. Furthermore, the results of the wash performance analysis exhibited a good stain removal at 10°C. The power of PersiAmy1 in the bread industry revealed soft, chewable crumbs with improved volume and porosity compared with control. This study highlights the intense power of robust novel PersiAmy1 as a functional bio-additive in many industrial applications.

Biochemical properties of cellulolytic and xylanolytic enzymes from Sporotrichum thermophile and their utility in bioethanol production using rice straw

Production of cellulolytic and xylanolytic enzymes by Sporotrichum thermophile was enhanced using response surface methodology in solid-state fermentation (SSF) using wheat straw and cotton oil cake. Cellulolytic and xylanolytic enzymes were partially purified by ammonium sulfate precipitation followed by ion exchange and gel filtration chromatographic techniques. Xylanase of S. thermophile is neutral xylanase displaying optimal activity at 60 °C with Km and Vmax values of 0.2 mg/mL and 238.05 µmole/min, respectively. All cellulases produced by the thermophilic mold showed optimal activity at pH 5.0 and 60 °C with Km values of 0.312 mg/mL, 0.113 mg/mL, and 0.285 mM for carboxymethyl cellulase (CMCase), filter paper cellulase (FPase), and β-glucosidase, respectively and while Vmax values were 181.81, 138.88, and 66.67 µmole/min, respectively. The presence of various metal ions (Ca2+ and Co2+), chemical reagent (glutaraldehyde), and surfactants (Tween 80 and Triton X-100) significantly improved the activities of all enzymes. All the enzymes showed high storage stability under low temperature (−20 and 4 °C) conditions. Cellulolytic and xylanolytic enzymes resulted in enhanced liberation of reducing sugars (356.34 mg/g) by hydrolyzing both cellulosic and hemicellulosic fractions of ammonia-pretreated rice straw as compared to other pretreatment methods used in the study. Fermentation of enzymatic hydrolysate resulted in the formation of 28.88 and 27.18 g/L of bioethanol in separate hydrolysis and fermentation (SHF) process by Saccharomyces cerevisiae and Pichia stipitis, respectively. Therefore, cellulolytic and xylanolytic enzymes of S. thermophile exhibited ideal properties of biocatalysts useful in the saccharification of cellulosic and hemicellulosic fractions of rice straw for the production of bioethanol.

Visual detection of different metal ions based on the tug of war between triangular Au nanoparticles and metal ions against mercaptans.

Herein, a new colorimetric sensor array was developed for the first time, which can rapidly recognize 9 types of metal ions (e.g., Ni2+, Zn2+, Cd2+, Cu2+, Cr3+, Fe2+, Se2+, Mn2+, and Mg2+). The colorimetric characteristics of the sensor array were closely related to the oxidation etching of the triangular gold nanoplates (AuNPLs) by hydrogen peroxide (H2O2), catalyzed by horseradish peroxidase (HRP). In the design, two types of thiols (glutathione (GSH) and cysteine (Cys)) as recognition elements were employed to construct the sensor units (AuNPLs/GSH and AuNPLs/Cys) and adjust the etching degrees of AuNPLs in the presence of various metal ions. The differential binding affinities between metal ions and thiols will lead to different degrees of oxidation etching of AuNPLs with hydrogen peroxide, exhibiting characteristic colors, which can be visually distinguished by the naked eye. Thus, the colorimetric sensor array provides a new way for the discrimination of various metal ions, thereby simplifying the water quality analysis.