Presence Of Disulfide Linkages Research Articles

Mucoadhesive properties of nanogels based on stimuli-sensitive glycosaminoglycan-graft-pNIPAAm copolymers

Mucoadhesive formulations capable of situ gelation are promising for improving ocular drug delivery. Here we investigated two types of nanogels based on anionic glycosaminoglycans with grafted thermo-responsive poly(N-isopropylacrylamide) chains. One type of nanogels were formed by thermo-induced gelling of heparin-graft-poly(N-isopropylacrylamide) and chondroitin sulfate-graft-poly(N-isopropylacrylamide) copolymers. Another type of nanogels was based on the same copolymers, but terminal groups of thermosensitive macromolecular chains were modified to form covalent disulfide cross-links. All types of nanogels were studied towards their ability to encapsulate and release model drug – dexamethasone. Mucoadhesivity of both thermo-gelled and covalently cross-linked polymeric systems, as well as their ability to interact with dexamethasone, was assessed by microscale thermophoresis (MST). Mucoadhesion properties were also evaluated by isothermal titration calorimetry (ITC), which were in good correlation with MST data. The presence of disulfide linkages and thiol groups were shown to favor improved binding of cross-linked nanogels to mucin. Moreover, in vivo intraocular pressure studies showed that presence of polymers in solution can alter the ocular absorption of carbonic anhydrase inhibitor from eyedrops. The pharmacological effect was in line with mucoadhesive properties of these copolymers.

Bio characterization of purified isoamylase from Rhizopus oryzae

Extracellular isoamylase produced by Rhizopus oryzae PR7 MTCC 9642 in in Erlenmeyer flasks was purified by ultrafiltration and by two steps of Superose 6 C-10/300GL gel chromatography. The enzyme molecule was found to be a monomer with molecular weight of 68 kDa.The purified isoamylase showed optimum activity at pH 5.5 and temperature 55 °C. The catalytic activity was found to remain stable at a broad range of pH (4–8) and could show remarkable thermo resistance specially in presence of exogenous thiols. The noteworthy enhancement of activity in presence of Mn2+ indicated its role as enzyme cofactor while thermos and chemostability in presence of exogenous thiols indicated the presence of disulfide linkage at active site of the enzyme. Both in vitro study and doking analysis indicated the highest affinity of the isoamylase of R. oryzae PR7 toward glycogen and the enzyme exhibited Km and Vmax values of 0.38 mg/mL and 6.65 mM/min/mL, respectively. Purified debranching amylolytic enzyme from R. oryzae PR7 has potential for the study of glycogen and starch structure and industrial application in combination with other amylolytic enzymes. The rapid, convenient, relatively simple purification process and other functional attributes of the enzyme made it competent to be employed for industrial utilization.

Programmed ‘triple-mode’ anti-tumor therapy: Improving peritoneal retention, tumor penetration and activatable drug release properties for effective inhibition of peritoneal carcinomatosis

Peritoneal carcinomatosis (PC) is a fatal condition arising in the gastrointestinal tract. PC patients administered drugs locally in the tumor region, such as in intraperitoneal chemotherapy (IPCh), suffer from low drug retention time and tumor penetration. Herein, we synthesized a lithocholic acid (LCA)-conjugated disulfide-linked polyethyleneimine (ssPEI) micelle (LAPMi) nanoconstruct by covalently conjugating ssPEI and LCA, thereby forming positive charged nanomicellar structures loaded with paclitaxel (PTX) (LAPMi-PTX) for IPCh. The incorporation of a positive surface charge aided in prolonging the peritoneal retention time, presumably via ascites-induced protein corona formation, and the subsequent size expansion caused resistance against undesired clearance through lymphatic openings. Furthermore, preferential tumor penetration by LAPMi-PTX is attributable to the permeation-enhancing properties of LCA, and the subsequent tumor activatable drug release was induced by the presence of disulfide linkages. By integrating these properties, LAPMi exhibited prolonged peritoneal residence time, enhanced tumor permeation and chemotherapeutic effect evidenced by in vitro, tumor spheroid and in vivo studies. Importantly, our strategy enabled significant PC inhibition and increased the overall survival rate of tumor-bearing mice. In conclusion, we provided a new paradigm of intractable PC treatment by enabling the prolonged residence time of the nanoconstruct, thereby enhancing tumor penetration and anti-tumor therapy.

Redox/pH dual stimuli-responsive degradable Salecan-g-SS-poly(IA-co-HEMA) hydrogel for release of doxorubicin

Salecan is a novel water-soluble extracellular β-glucan and possesses excellent physicochemical and biological properties. Here, redox/pH dual stimuli-responsive hydrogel based on Salecan grafted with itaconic acid (IA) and 2-hydroxyethyl methacrylate (HEMA) were prepared using disulfide-functionalized crosslinker N,N-bis(acryloyl)cystamine (BAC) for controlled drug delivery. The introduction of carboxylic groups endows the system with pH-sensitive character, swelling behavior of the hydrogel was conducted by changing the pH and Salecan content. It was demonstrated that DOX was efficiently loaded into the hydrogels and released in a controlled fashion via pH-control and swelling-shrinking mechanism. More importantly, DOX-loaded hydrogels showed dose dependent cytotoxicity toward A549 cell, and efficient cell killing was observed. Furthermore, a key point of this study was that the presence of disulfide linkage in system favored the degradation of hydrogels in the reductive environment. These results highlight the potential of Salecan-g-SS-poly(IA-co-HEMA) hydrogel as a novel system for the controlled release of anti-cancer drugs.

Reducibly degradable hydrogels of PNIPAM and PDMAEMA: Synthesis, stimulus‐response and drug release

AbstractReducibly degradable hydrogels of poly(N‐isopropylacrylamide) (PNIPAM) and poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) were synthesized by the combination of reversible addition‐fragmentation chain transfer (RAFT) polymerization and click chemistry. The alkyne‐pending copolymer of PNIPAM or PDMAEMA was obtained through RAFT copolymerization of propargyl acrylate with NIPAM or DMAEMA. Bis‐2‐azidyl‐isobutyrylamide of cystamine (AIBCy) was used as the crosslinking reagent to prepare reducibly degradable hydrogels by click chemistry. The hydrogels exhibited temperature or pH stimulus‐responsive behavior in water, with rapid response, high swelling ratio, and reproducible swelling/shrinkage cycles. The loading and release of ceftriaxone sodium proved the feasibility of the hydrogels as the stimulus‐responsive drug delivery system. Furthermore, the presence of disulfide linkage in AIBCy favored the degradation of hydrogels in the reductive environment. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3604–3612, 2010

The role of the disulfide group in disulfide-based polymeric gene carriers

Background: An essential prerequisite for successful gene therapy is the development of safe and efficient gene delivery carriers. For this purpose, cationic polymers have been widely studied as non-viral carriers, but they generally suffer from low transfection efficiency and/or high cytotoxicity. To address these problems, disulfide-based cationic polymers have been designed as intelligent gene carriers that are capable of inducing highly efficient gene transfection with low cytotoxicity. Objective: The present review discusses the effects of the disulfide linker on the gene delivery properties of cationic polymers in relation to various gene delivery barriers. Methods: The literature regarding the gene delivery barriers encountered by polymeric gene delivery is reviewed and discussed in relation to the presence of the disulfide moiety in these gene carriers. Conclusions: The presence of disulfide linkages in cationic polymers can in many aspects favorably influence the gene delivery properties, such as increasing DNA binding ability, enabling de-shielding of ‘stealth’ (PEG) groups, fine-tuning of the buffer capacity for enhanced endosomal escape, improving carrier-unpacking and decreasing cytotoxicity. Therefore, disulfide-based cationic polymers are promising candidates for the next generation of non-viral carriers.

Polyomaviridae Assembly Polymorphism from an Energy Landscape Perspective

Polyomaviridae assemblein vitrointo different aggregates depending on experimental conditions. We use an energy landscape approach using empirical energy calculations to quantify how the formation of these different aggregates depends on pH, the presence of bound calcium ions and disulfide linkages. Computations are carried out for SV40, a member of the Polyomaviridae family and are based on the binding free energy landscape of three distinct trimers of pentamers that correspond to the different bonding configurations between the capsid proteins observed in its crystal structure. Our computational analysis shows that the energetics of one of these environments is pivotal for the polymorphic assembly behaviour of SV40, whilst the binding energy landscapes of the other two environments are broadly funnel-shaped and thus contribute little to the formation of particles other than virus-like particles (VLP). We have quantified how the existence of bound calcium ions in the absence of disulfide linkages enhances the binding free energies of all three environments and hence, favours the assembly of VLPs. Moreover, estimation of the relative binding free energies of the three environments at pH 5 and pH 8 reveals that they are destabilized at pH 5 relative to pH 8. The extent of this destabilization is dependent on the presence of disulfide linkages and bound calcium ions and accounts for the experimentally observed polymorphic behaviour of VP1 proteins at pH 5. Interestingly, concurrent existence of bound calcium ions and disulfide linkages is found to be destabilizing and thus may disrupt the assembly of VLPs at pH 8.

Ion trap collisional activation of disulfide linkage intact and reduced multiply protonated polypeptides.

The presence of disulfide linkages in multiply charged polypeptide ions tends to inhibit the formation of structurally informative product ions under conventional quadrupole ion trap collisional activation conditions. In particular, fragmentation that requires two cleavages (i.e., cleavage of a disulfide linkage and a peptide linkage) is strongly suppressed. Reduction of the disulfide linkage(s) by use of dithiothreitol yields parent ions upon electrospray without this complication. Far richer structural information is revealed by ion trap collisional activation of the disulfide-reduced species than from the native species. These observations are illustrated with doubly protonated native and reduced somatosin, the [M + 5H](5+) ion of native bovine insulin and the [M + 4H](4+) and [M + 3H](3+) ions of the B-chain of bovine insulin produced by reduction of the disulfide linkages in insulin, and the [M + 11H](11+) ion of native chicken lysozyme and the [M + 11H](11+) and [M + 14H](14+) ions of reduced lysozyme. In each case, the product ions produced by ion trap collisional activation were subjected to ion/ion proton transfer reactions to facilitate interpretation of the product ion spectra. These studies clearly suggest that the identification of polypeptides with one or more disulfide linkages via application of ion trap collisional activation to the multiply charged parent ions formed directly by electrospray could be problematic. Means for cleaving the disulfide linkage, such as reduction by dithiothreitol prior to electrospray, are therefore desirable in these cases.