Preparation Of Fiber-reinforced Composites Research Articles

Designing and Preparation of Fiber-Reinforced Composites with Enhanced Interface Adhesion.

The interfacial properties between fibers and resin matrices show great influence on the properties of fiber-reinforced composites. In this work, phthalonitrile containing benzoxazine (BA-ph) was chosen as the resin matrix, which combined with the glass fiber (GF) to prepare reinforced composite laminates at low temperature (200 °C). The poly(arylene ether nitrile) (PEN) was used to modify the GF and BA-ph matrix. Curing behaviors of the BA-ph/PEN were investigated with Differential scanning calorimetric (DSC) and Dynamic rheological analysis (DRA), and results indicated that the polymerization would be hindered by PEN due to the dilution effects. Moreover, the formation of triazine rings which assigning to the ring-forming polymerization of nitrile groups in BA-ph and PEN could improve the compatibility of BA-ph and PEN in the matrix. The SEM images of the fracture surface of the composites revealed that the brittleness of BA-ph matrix and interfacial adhesion between GFs and matrix was improved. The enhanced interfacial adhesion was detailedly discussed from the perspective of physical entanglement and the copolymerization between PEN chains on the surface of GFs and BA-ph/PEN matrix. The results of DMA also explained the toughness of BA-ph/PEN matrix, the semi-interpenetrating polymer networks and the interfacial adhesion. In sum, a feasible strategy that modifies the surface of GFs and the brittleness of the thermosetting matrix by high-performance thermoplastic polymers, which can be employed to prepare the composite laminates with improved properties.

Surface treatments of plant fibers and their effects on mechanical properties of fiber-reinforced composites: A review

The need of natural fiber-reinforced composites is increasing at very fast rate because of their ecofriendly production, decomposition, high specific strength, abundance, good physical and mechanical properties. Available literature reveals that past researchers have done a lot of work for the preparation and characterization of fiber-reinforced composites. While developing natural fiber composites, researchers encountered various problems like hydrophilic nature of natural fibers, incompatibility of natural fibers with matrix materials, thermal instability of natural fibers, and poor interfacial bonding between reinforcing phase and matrix phase. However, some of these problems can be solved to a greater extent by considering surface treatment of natural fibers before they are used in the preparation of fiber-reinforced composites. Thus, there is a need for understanding the effect of several surface treatments on the mechanical properties of fiber-reinforced composites. The aim of this paper is to put forth a comprehensive review on the effects of different surface treatments on the mechanical properties such as tensile strength, flexural strength, and impact strength and also interfacial shear strength of the fiber-reinforced composites.