Prediction Accuracy Of Genomic Selection Research Articles

Residual network improves the prediction accuracy of genomic selection.

Genetic improvement of complex traits in animal and plant breeding depends on the efficient and accurate estimation of breeding values. Deep learning methods have been shown to be not superior over traditional genomic selection (GS) methods, partially due to the degradation problem (i.e. with the increase of the model depth, the performance of the deeper model deteriorates). Since the deep learning method residual network (ResNet) is designed to solve gradient degradation, we examined its performance and factors related to its prediction accuracy in GS. Here we compared the prediction accuracy of conventional genomic best linear unbiased prediction, Bayesian methods (BayesA, BayesB, BayesC, and Bayesian Lasso), and two deep learning methods, convolutional neural network and ResNet, on three datasets (wheat, simulated and real pig data). ResNet outperformed other methods in both Pearson's correlation coefficient (PCC) and mean squared error (MSE) on the wheat and simulated data. For the pig backfat depth trait, ResNet still had the lowest MSE, whereas Bayesian Lasso had the highest PCC. We further clustered the pig data into four groups and, on one separated group, ResNet had the highest prediction accuracy (both PCC and MSE). Transfer learning was adopted and capable of enhancing the performance of both convolutional neural network and ResNet. Taken together, our findings indicate that ResNet could improve GS prediction accuracy, affected potentially by factors such as the genetic architecture of complex traits, data volume, and heterogeneity.

Effects of SNP marker density and training population size on prediction accuracy in alfalfa (Medicago sativa L.) genomic selection.

Effects of individual single-nucleotide polymorphism (SNP) markers and the size of "training" and "test" populations affect prediction accuracy in genomic selection (GS). This study evaluated 11 subsets of 4932 SNPs using six genetic additive methods to understand marker density in GS prediction in alfalfa (Medicago sativa L.). In the GS methods, the effect of "training" to "test" population size was also evaluated. Fourteen alfalfa populations sampled from long-term grazing sites were genotyped using genotyping by sequencing for the identification of SNPs. These populations were also phenotyped for six agromorphological and three nutritive traits from 2018 to 2020. The accuracy of GS prediction improved across six GS methods when the ratio of "training" to "test" population size increased. However, the prediction accuracy of the six GS methods reduced to a range of -0.27 to 0.11 when random, uninformative SNPs were used. In this study, five Bayesian methods and ridge-regression best linear unbiased prediction (rrBLUP) method had similar GS accuracies for "training" sets, but rrBLUP tended to outperform Bayesian methods in independent "test" sets when SNP subsets with high mean-squared-estimated-marker effect were used. These findings can enhance the application of GS in alfalfa genetic improvement.

Genomic selection for growth characteristics in Korean red pine (Pinus densiflora Seibold & Zucc.).

Traditionally, selective breeding has been used to improve tree growth. However, traditional selection methods are time-consuming and limit annual genetic gain. Genomic selection (GS) offers an alternative to progeny testing by estimating the genotype-based breeding values of individuals based on genomic information using molecular markers. In the present study, we introduced GS to an open-pollinated breeding population of Korean red pine (Pinus densiflora), which is in high demand in South Korea, to shorten the breeding cycle. We compared the prediction accuracies of GS for growth characteristics (diameter at breast height [DBH], height, straightness, and volume) in Korean red pines under various conditions (marker set, model, and training set) and evaluated the selection efficiency of GS compared to traditional selection methods. Training the GS model to include individuals from various environments using genomic best linear unbiased prediction (GBLUP) and markers with a minor allele frequency larger than 0.05 was effective. The optimized model had an accuracy of 0.164-0.498 and a predictive ability of 0.018-0.441. The predictive ability of GBLUP against that of additive best linear unbiased prediction (ABLUP) was 0.86-5.10, and against the square root of heritability was 0.19-0.76, indicating that GS for Korean red pine was as efficient as in previous studies on forest trees. Moreover, the response to GS was higher than that to traditional selection regarding the annual genetic gain. Therefore, we conclude that the trained GS model is more effective than the traditional breeding methods for Korean red pines. We anticipate that the next generation of trees selected by GS will lay the foundation for the accelerated breeding of Korean red pine.

Genomic selection for target traits in the Australian lentil breeding program.

Genomic selection (GS) uses associations between markers and phenotypes to predict the breeding values of individuals. It can be applied early in the breeding cycle to reduce the cross-to-cross generation interval and thereby increase genetic gain per unit of time. The development of cost-effective, high-throughput genotyping platforms has revolutionized plant breeding programs by enabling the implementation of GS at the scale required to achieve impact. As a result, GS is becoming routine in plant breeding, even in minor crops such as pulses. Here we examined 2,081 breeding lines from Agriculture Victoria's national lentil breeding program for a range of target traits including grain yield, ascochyta blight resistance, botrytis grey mould resistance, salinity and boron stress tolerance, 100-grain weight, seed size index and protein content. A broad range of narrow-sense heritabilities was observed across these traits (0.24-0.66). Genomic prediction models were developed based on 64,781 genome-wide SNPs using Bayesian methodology and genomic estimated breeding values (GEBVs) were calculated. Forward cross-validation was applied to examine the prediction accuracy of GS for these targeted traits. The accuracy of GEBVs was consistently higher (0.34-0.83) than BLUP estimated breeding values (EBVs) (0.22-0.54), indicating a higher expected rate of genetic gain with GS. GS-led parental selection using early generation breeding materials also resulted in higher genetic gain compared to BLUP-based selection performed using later generation breeding lines. Our results show that implementing GS in lentil breeding will fast track the development of high-yielding cultivars with increased resistance to biotic and abiotic stresses, as well as improved seed quality traits.

Regularized multi-trait multi-locus linear mixed models for genome-wide association studies and genomic selection in crops

BackgroundWe consider two key problems in genomics involving multiple traits: multi-trait genome wide association studies (GWAS), where the goal is to detect genetic variants associated with the traits; and multi-trait genomic selection (GS), where the emphasis is on accurately predicting trait values. Multi-trait linear mixed models build on the linear mixed model to jointly model multiple traits. Existing estimation methods, however, are limited to the joint analysis of a small number of genotypes; in fact, most approaches consider one SNP at a time. Estimating multi-dimensional genetic and environment effects also results in considerable computational burden. Efficient approaches that incorporate regularization into multi-trait linear models (no random effects) have been recently proposed to identify genomic loci associated with multiple traits (Yu et al. in Multitask learning using task clustering with applications to predictive modeling and GWAS of plant varieties. arXiv:1710.01788, 2017; Yu et al in Front Big Data 2:27, 2019), but these ignore population structure and familial relatedness (Yu et al in Nat Genet 38:203–208, 2006).ResultsThis work addresses this gap by proposing a novel class of regularized multi-trait linear mixed models along with scalable approaches for estimation in the presence of high-dimensional genotypes and a large number of traits. We evaluate the effectiveness of the proposed methods using datasets in maize and sorghum diversity panels, and demonstrate benefits in both achieving high prediction accuracy in GS and in identifying relevant marker-trait associations.ConclusionsThe proposed regularized multivariate linear mixed models are relevant for both GWAS and GS. We hope that they will facilitate agronomy-related research in plant biology and crop breeding endeavors.

Genome-wide association mapping and genomic prediction for late blight and potato cyst nematode resistance in potato (Solanum tuberosum L.).

Potatoes are an important source of food for millions of people worldwide. Biotic stresses, notably late blight and potato cyst nematodes (PCN) pose a major threat to potato production worldwide, and knowledge of genes controlling these traits is limited. A genome-wide association mapping study was conducted to identify the genomic regulators controlling these biotic stresses, and the genomic prediction accuracy was worked out using the GBLUP model of genomic selection (GS) in a panel of 222 diverse potato accessions. The phenotype data on resistance to late blight and two PCN species (Globodera pallida and G. rostochiensis) were recorded for three and two consecutive years, respectively. The potato panel was genotyped using genotyping by sequencing (GBS), and 1,20,622 SNP markers were identified. A total of 7 SNP associations for late blight resistance, 9 and 11 for G. pallida and G. rostochiensis, respectively, were detected by additive and simplex dominance models of GWAS. The associated SNPs were distributed across the chromosomes, but most of the associations were found on chromosomes 5, 10 and 11, which have been earlier reported as the hotspots of disease-resistance genes. The GS prediction accuracy estimates were low to moderate for resistance to G. pallida (0.04-0.14) and G. rostochiensis (0.14-0.21), while late blight resistance showed a high prediction accuracy of 0.42-0.51. This study provides information on the complex genetic nature of these biotic stress traits in potatoes and putative SNP markers for resistance breeding.

Genomic selection to improve husk tightness based on genomic molecular markers in maize.

The husk tightness (HTI) in maize plays a crucial role in regulating the water content of ears during the maturity stage, thereby influencing the quality of mechanical grain harvesting in China. Genomic selection (GS), which employs molecular markers, offers a promising approach for identifying and selecting inbred lines with the desired HTI trait in maize breeding. However, the effectiveness of GS is contingent upon various factors, including the genetic architecture of breeding populations, sequencing platforms, and statistical models. An association panel of maize inbred lines was grown across three sites over two years, divided into four subgroups. GS analysis for HTI prediction was performed using marker data from three sequencing platforms and six marker densities with six statistical methods. The findings indicate that a loosely attached husk can aid in the dissipation of water from kernels in temperate maize germplasms across most environments but not nessarily for tropical-origin maize. Considering the balance between GS prediction accuracy and breeding cost, the optimal prediction strategy is the rrBLUP model, the 50K sequencing platform, a 30% proportion of the test population, and a marker density of r2=0.1. Additionally, selecting a specific SS subgroup for sampling the testing set significantly enhances the predictive capacity for husk tightness. The determination of the optimal GS prediction strategy for HTI provides an economically feasible reference for the practice of molecular breeding. It also serves as a reference method for GS breeding of other agronomic traits.

Meta-analysis of the quantitative trait loci associated with agronomic traits, fertility restoration, disease resistance, and seed quality traits in pigeonpea (Cajanus cajan L.).

A meta-analysis of quantitative trait loci (QTLs), associated with agronomic traits, fertility restoration, disease resistance, and seed quality traits was conducted for the first time in pigeonpea (Cajanus cajan L.). Data on 498 QTLs was collected from 9 linkage mapping studies (involving 21 biparental populations). Of these 498, 203 QTLs were projected onto "PigeonPea_ConsensusMap_2022," saturated with 10,522 markers, which resulted in the prediction of 34 meta-QTLs (MQTLs). The average confidence interval (CI) of these MQTLs (2.54cM) was 3.37 times lower than the CI of the initial QTLs (8.56cM). Of the 34 MQTLs, 12 high-confidence MQTLs with CI (≤5cM) and a greater number of initial QTLs (≥5) were utilized to extract 2255 gene models, of which 105 were believed to be associated with different traits under study. Furthermore, eight of these MQTLs were observed to overlap with several marker-trait associations or significant SNPs identified in previous genome-wide association studies. Furthermore, synteny and ortho-MQTL analyses among pigeonpea and four related legumes crops, such as chickpea, pea, cowpea, and French bean, led to the identification of 117 orthologous genes from 20 MQTL regions. Markers associated with MQTLs can be employed for MQTL-assisted breeding as well as to improve the prediction accuracy of genomic selection in pigeonpea. Additionally, MQTLs may be subjected to fine mapping, and some of the promising candidate genes may serve as potential targets for positional cloning and functional analysis to elucidate the molecular mechanisms underlying the target traits.

Evaluation of low-density SNP panels and imputation for cost-effective genomic selection in four aquaculture species.

Genomic selection can accelerate genetic progress in aquaculture breeding programmes, particularly for traits measured on siblings of selection candidates. However, it is not widely implemented in most aquaculture species, and remains expensive due to high genotyping costs. Genotype imputation is a promising strategy that can reduce genotyping costs and facilitate the broader uptake of genomic selection in aquaculture breeding programmes. Genotype imputation can predict ungenotyped SNPs in populations genotyped at a low-density (LD), using a reference population genotyped at a high-density (HD). In this study, we used datasets of four aquaculture species (Atlantic salmon, turbot, common carp and Pacific oyster), phenotyped for different traits, to investigate the efficacy of genotype imputation for cost-effective genomic selection. The four datasets had been genotyped at HD, and eight LD panels (300-6,000 SNPs) were generated in silico. SNPs were selected to be: i) evenly distributed according to physical position ii) selected to minimise the linkage disequilibrium between adjacent SNPs or iii) randomly selected. Imputation was performed with three different software packages (AlphaImpute2, FImpute v.3 and findhap v.4). The results revealed that FImpute v.3 was faster and achieved higher imputation accuracies. Imputation accuracy increased with increasing panel density for both SNP selection methods, reaching correlations greater than 0.95 in the three fish species and 0.80 in Pacific oyster. In terms of genomic prediction accuracy, the LD and the imputed panels performed similarly, reaching values very close to the HD panels, except in the pacific oyster dataset, where the LD panel performed better than the imputed panel. In the fish species, when LD panels were used for genomic prediction without imputation, selection of markers based on either physical or genetic distance (instead of randomly) resulted in a high prediction accuracy, whereas imputation achieved near maximal prediction accuracy independently of the LD panel, showing higher reliability. Our results suggests that, in fish species, well-selected LD panels may achieve near maximal genomic selection prediction accuracy, and that the addition of imputation will result in maximal accuracy independently of the LD panel. These strategies represent effective and affordable methods to incorporate genomic selection into most aquaculture settings.

Genomics combined with UAS data enhances prediction of grain yield in winter wheat.

With the human population continuing to increase worldwide, there is pressure to employ novel technologies to increase genetic gain in plant breeding programs that contribute to nutrition and food security. Genomic selection (GS) has the potential to increase genetic gain because it can accelerate the breeding cycle, increase the accuracy of estimated breeding values, and improve selection accuracy. However, with recent advances in high throughput phenotyping in plant breeding programs, the opportunity to integrate genomic and phenotypic data to increase prediction accuracy is present. In this paper, we applied GS to winter wheat data integrating two types of inputs: genomic and phenotypic. We observed the best accuracy of grain yield when combining both genomic and phenotypic inputs, while only using genomic information fared poorly. In general, the predictions with only phenotypic information were very competitive to using both sources of information, and in many cases using only phenotypic information provided the best accuracy. Our results are encouraging because it is clear we can enhance the prediction accuracy of GS by integrating high quality phenotypic inputs in the models.

Genomic selection in algae with biphasic lifecycles: A Saccharina latissima (sugar kelp) case study

IntroductionSugar kelp (Saccharina latissima) has a biphasic life cycle, allowing selection on both thediploid sporophytes (SPs) and haploid gametophytes (GPs).MethodsWe trained a genomic selection (GS) model from farm-tested SP phenotypic data and used a mixed-ploidy additive relationship matrix to predict GP breeding values. Topranked GPs were used to make crosses for further farm evaluation. The relationship matrix included 866 individuals: a) founder SPs sampled from the wild; b) progeny GPs from founders; c) Farm-tested SPs crossed from b); and d) progeny GPs from farm-tested SPs. The complete pedigree-based relationship matrix was estimated for all individuals. A subset of founder SPs (n = 58) and GPs (n = 276) were genotyped with Diversity Array Technology and whole genome sequencing, respectively. We evaluated GS prediction accuracy via cross validation for SPs tested on farm in 2019 and 2020 using a basic GBLUP model. We also estimated the general combining ability (GCA) and specific combining ability (SCA) variances of parental GPs. A total of 11 yield-related and morphology traits were evaluated.ResultsThe cross validation accuracies for dry weight per meter (r ranged from 0.16 to 0.35) and wet weight per meter (r ranged 0.19 to 0.35) were comparable to GS accuracy for yield traits in terrestrial crops. For morphology traits, cross validation accuracy exceeded 0.18 in all scenarios except for blade thickness in the second year. Accuracy in a third validation year (2021) was 0.31 for dry weight per meter over a confirmation set of 87 individuals.DiscussionOur findings indicate that progress can be made in sugar kelp breeding by using genomic selection.

Gene based markers improve precision of genome-wide association studies and accuracy of genomic predictions in rice breeding.

It is hypothesized that the genome-wide genic markers may increase the prediction accuracy of genomic selection for quantitative traits. To test this hypothesis, a set of candidate gene-based markers for yield and grain traits-related genes cloned across the rice genome were custom-designed. A multi-model, multi-locus genome-wide association study (GWAS) was performed using new genic markers developed to test their effectiveness for gene discovery. Two multi-locus models, FarmCPU and mrMLM, along with a single-locus mixed linear model (MLM), identified 28 significant marker-trait associations. These associations revealed novel causative alleles for grain weight and pleiotropic associations with other traits. For instance, the marker YD91 derived from the gene OsAAP3 on chromosome 1 was consistently associated with grain weight, while the gene has a significant effect on grain yield. Furthermore, nine genomic selection methods, including regression-based and machine learning-based models, were used to predict grain weight using a leave-one-out five-fold cross-validation approach to optimize the genomic selection model with genic markers. Among nine prediction models, Kernel Hilbert Space Regression (RKHS) is the best among regression-based models, and Random Forest Regression (RFR) is the best among machine learning-based models. Genomic prediction accuracies with and without GWAS significant markers were compared to assess the effectiveness of markers. The rapid decreases in prediction accuracy upon dropping GWAS significant markers indicate the effectiveness of new genic markers in genomic selection. Apart from that, the candidate gene-based markers were found to be more effective in genomic selection programs for better accuracy.

Genetic dissection of and genomic selection for seed weight, pod length, and pod width in soybean

A biparental soybean population of 364 recombinant inbred lines (RILs) derived from Zhongdou 41 × ZYD 02.878 was used to identify quantitative trait loci (QTL) associated with hundred-seed weight (100-SW), pod length (PL), and pod width (PW). 100-SW, PL, and PW showed moderate correlations among one another, and 100-SW was correlated most strongly with PW (0.64–0.74). Respectively 74, 70, 75 and 19 QTL accounting for 38.7%–78.8% of total phenotypic variance were identified by inclusive composite interval mapping, restricted two-stage multi-locus genome-wide association analysis, 3 variance-component multi-locus random-SNP-effect mixed linear model analysis, and conditional genome-wide association analysis. Of these QTL, 189 were novel, and 24 were detected by multiple methods. Six loci were associated with 100-SW, PL, and PW and may be pleiotropic loci. A total of 284 candidate genes were identified in colocalizing QTL regions, including the verified gene Seed thickness 1 (ST1). Eleven genes with functions involved in pectin biosynthesis, phytohormone, ubiquitin-protein, and photosynthesis pathways were prioritized by examining single nucleotide polymorphism (SNP) variation, calculating genetic differentiation index, and inquiring gene expression. The prediction accuracies of genomic selection (GS) for 100-SW, PL, and PW based on single trait-associated markers reached 0.82, 0.76, and 0.86 respectively, but selection index (SI)-assisted GS strategy did not increase GS efficiency and inclusion of trait-associated markers as fixed effects reduced prediction accuracy. These results shed light on the genetic basis of 100-SW, PL, and PW and provide GS models for these traits with potential application in breeding programs.

Genetic variation and marker-trait association affect the genomic selection prediction accuracy of soybean protein and oil content.

Genomic selection (GS) is a potential breeding approach for soybean improvement. In this study, GS was performed on soybean protein and oil content using the Ridge Regression Best Linear Unbiased Predictor (RR-BLUP) based on 1,007 soybean accessions. The SoySNP50K SNP dataset of the accessions was obtained from the USDA-ARS, Beltsville, MD lab, and the protein and oil content of the accessions were obtained from GRIN. Our results showed that the prediction accuracy of oil content was higher than that of protein content. When the training population size was 100, the prediction accuracies for protein content and oil content were 0.60 and 0.79, respectively. The prediction accuracy increased with the size of the training population. Training populations with similar phenotype or with close genetic relationships to the prediction population exhibited better prediction accuracy. A greatest prediction accuracy for both protein and oil content was observed when approximately 3,000 markers with -log10(P) greater than 1 were included. This information will help improve GS efficiency and facilitate the application of GS.

Genomic Selection in Chinese Holsteins Using Regularized Regression Models for Feature Selection of Whole Genome Sequencing Data.

Simple SummaryGenomic selection (GS) is increasingly widely used in animal breeding, owing to its high efficiency in the genetic improvement of economic traits. In China, GS has been implemented for genetic evaluation of young bulls in dairy cattle breeding programs since 2012. GS is commonly based on single nucleotide polymorphism (SNP) chips. The cost of whole genome sequencing (WGS) has decreased tremendously in recent years, allowing increased studies of WGS-based GS. In this study, based on the imputed WGS data of approximately 8000 Chinese Holsteins, we investigated the performance of GS of milk production traits using the feature selection method of regularized regression. The results showed that WGS-based GS using regularized regression models and the commonly used linear mixed models achieved comparable prediction accuracies. For milk and protein yields, GS using a combination of SNPs selected with a regularized regression model and 50K SNP chip data achieved the best prediction performance, and GS using SNPs selected with a linear mixed model combined with 50K SNP chip data performed best for fat yield. The proposed method of GS based on WGS data, i.e., feature selection using regularization regression models, provides a valuable novel strategy for genomic selection.Genomic selection (GS) is an efficient method to improve genetically economic traits. Feature selection is an important method for GS based on whole-genome sequencing (WGS) data. We investigated the prediction performance of GS of milk production traits using imputed WGS data on 7957 Chinese Holsteins. We used two regularized regression models, least absolute shrinkage and selection operator (LASSO) and elastic net (EN) for feature selection. For comparison, we performed genome-wide association studies based on a linear mixed model (LMM), and the N single nucleotide polymorphisms (SNPs) with the lowest p-values were selected (LMMLASSO and LMMEN), where N was the number of non-zero effect SNPs selected by LASSO or EN. GS was conducted using a genomic best linear unbiased prediction (GBLUP) model and several sets of SNPs: (1) selected WGS SNPs; (2) 50K SNP chip data; (3) WGS data; and (4) a combined set of selected WGS SNPs and 50K SNP chip data. The results showed that the prediction accuracies of GS with features selected using LASSO or EN were comparable to those using features selected with LMMLASSO or LMMEN. For milk and protein yields, GS using a combination of SNPs selected with LASSO and 50K SNP chip data achieved the best prediction performance, and GS using SNPs selected with LMMLASSO combined with 50K SNP chip data performed best for fat yield. The proposed method, feature selection using regularization regression models, provides a valuable novel strategy for WGS-based GS.

Improving the accuracy of genomic predictions in an outcrossing species with hybrid cultivars between heterozygote parents: a case study of oil palm (Elaeis guineensis Jacq.).

Genomic selection (GS) is a method of marker-assisted selection revolutionizing crop improvement, but it can still be optimized. For hybrid breeding between heterozygote parents of different populations or species, specific aspects can be considered to increase GS accuracy: (1) training population genotyping, i.e., only genotyping the hybrid parents or also a sample of hybrid individuals, and (2) marker effects modeling, i.e., using population-specific effects of single nucleotide polymorphism alleles model (PSAM) or across-population SNP genotype model (ASGM). Here, this was investigated empirically for the prediction of the performances of oil palm hybrids for yield traits. The GS model was trained on 352 hybrid crosses and validated on 213 independent hybrid crosses. The training and validation hybrid parents and 399 training hybrid individuals were genotyping by sequencing. Despite the small proportion of hybrid individuals genotyped and low parental heterozygosity, GS prediction accuracy increased on average by 5% (range 1.4-31.3%, depending on trait and model) when training was done using genomic data on hybrids and parents compared with only parental genomic data. With ASGM, GS prediction accuracy increased on average by 3% (- 10.2 to 40%, depending on trait and genotyping strategy) compared with PSAM. We conclude that the best GS strategy for oil palm is to aggregate genomic data of parents and hybrid individuals and to ignore the parental origin of marker alleles (ASGM). To gain a better insight into these results, future studies should examine the respective effect of capturing genetic variability within crosses and taking segregation distortion into account when genotyping hybrid individuals, and investigate the factors controlling the relative performances of ASGM and PSAM in hybrid crops.

Statistical Methods for the Quantitative Genetic Analysis of High-Throughput Phenotyping Data.

The advent of plant phenomics, coupled with the wealth of genotypic data generated by next-generation sequencing technologies, provides exciting new resources for investigations into and improvement of complex traits. However, these new technologies also bring new challenges in quantitative genetics, namely, a need for the development of robust frameworks that can accommodate these high-dimensional data. In this chapter, we describe methods for the statistical analysis of high-throughput phenotyping (HTP) data with the goal of enhancing the prediction accuracy of genomic selection (GS). Following the Introduction in Sec. 1, Sec.2 discusses field-based HTP, including the use of unoccupied aerial vehicles and light detection and ranging, as well as how we can achieve increased genetic gain by utilizing image data derived from HTP. Section 3 considers extending commonly used GS models to integrate HTP data as covariates associated with the principal trait response, such as yield. Particular focus is placed on single-trait, multi-trait, and genotype by environment interaction models. One unique aspect of HTP data is that phenomics platforms often produce large-scale data with high spatial and temporal resolution for capturing dynamic growth, development, and stress responses. Section 4 discusses the utility of a random regression model for performing longitudinal modeling. The chapter concludes with a discussion of some standing issues.

Strategies to Increase Prediction Accuracy in Genomic Selection of Complex Traits in Alfalfa (Medicago sativa L.).

Agronomic traits such as biomass yield and abiotic stress tolerance are genetically complex and challenging to improve through conventional breeding approaches. Genomic selection (GS) is an alternative approach in which genome-wide markers are used to determine the genomic estimated breeding value (GEBV) of individuals in a population. In alfalfa (Medicago sativa L.), previous results indicated that low to moderate prediction accuracy values (<70%) were obtained in complex traits, such as yield and abiotic stress resistance. There is a need to increase the prediction value in order to employ GS in breeding programs. In this paper we reviewed different statistic models and their applications in polyploid crops, such as alfalfa and potato. Specifically, we used empirical data affiliated with alfalfa yield under salt stress to investigate approaches that use DNA marker importance values derived from machine learning models, and genome-wide association studies (GWAS) of marker-trait association scores based on different GWASpoly models, in weighted GBLUP analyses. This approach increased prediction accuracies from 50% to more than 80% for alfalfa yield under salt stress. Finally, we expended the weighted GBLUP approach to potato and analyzed 13 phenotypic traits and obtained similar results. This is the first report on alfalfa to use variable importance and GWAS-assisted approaches to increase the prediction accuracy of GS, thus helping to select superior alfalfa lines based on their GEBVs.

Evaluation of Genome-Enabled Prediction for Carcass Primal Cut Yields Using Single-Step Genomic Best Linear Unbiased Prediction in Hanwoo Cattle.

There is a growing interest worldwide in genetically selecting high-value cut carcass weights, which allows for increased profitability in the beef cattle industry. Primal cut yields have been proposed as a potential indicator of cutability and overall carcass merit, and it is worthwhile to assess the prediction accuracies of genomic selection for these traits. This study was performed to compare the prediction accuracy obtained from a conventional pedigree-based BLUP (PBLUP) and a single-step genomic BLUP (ssGBLUP) method for 10 primal cut traits—bottom round, brisket, chuck, flank, rib, shank, sirloin, striploin, tenderloin, and top round—in Hanwoo cattle with the estimators of the linear regression method. The dataset comprised 3467 phenotypic observations for the studied traits and 3745 genotyped individuals with 43,987 single-nucleotide polymorphisms. In the partial dataset, the accuracies ranged from 0.22 to 0.30 and from 0.37 to 0.54 as evaluated using the PBLUP and ssGBLUP models, respectively. The accuracies of PBLUP and ssGBLUP with the whole dataset varied from 0.45 to 0.75 (average 0.62) and from 0.52 to 0.83 (average 0.71), respectively. The results demonstrate that ssGBLUP performed better than PBLUP averaged over the 10 traits, in terms of prediction accuracy, regardless of considering a partial or whole dataset. Moreover, ssGBLUP generally showed less biased prediction and a value of dispersion closer to 1 than PBLUP across the studied traits. Thus, the ssGBLUP seems to be more suitable for improving the accuracy of predictions for primal cut yields, which can be considered a starting point in future genomic evaluation for these traits in Hanwoo breeding practice.

Genomic prediction for testes weight of the tiger pufferfish, Takifugu rubripes, using medium to low density SNPs

Aquaculture production is expected to increase with the help of genomic selection (GS). The possibility of performing GS using only a small number of SNPs has been examined in order to reduce genotyping costs; however, the practicality of this approach is still unclear. Here, we tested whether the effects of reducing the number of SNPs impaired the prediction accuracy of GS for standard length, body weight, and testes weight in the tiger pufferfish (Takifugu rubripes). High values for predictive ability (0.563–0.606) were obtained with 4000 SNPs for all traits under a genomic best linear unbiased predictor (GBLUP) model. These values were still within an acceptable range with 1200 SNPs (0.554–0.588). However, predictive abilities and prediction accuracies deteriorated using less than 1200 SNPs largely due to the reduced power in accurately estimating the genetic relationship among individuals; family structure could still be resolved with as few as 400 SNPs. This suggests that the SNPs informative for estimation of genetic relatedness among individuals differ from those for inference of family structure, and that non-random SNP selection based on the effects on family structure (e.g., site-FST, principal components, or random forest) is unlikely to increase the prediction accuracy for these traits.