Detection Of Power Quality Disturbances Research Articles

Effect of Phase Shifting on Real-Time Detection and Classification of Power Quality Disturbances

Power quality improvement and Power quality disturbance (PQD) detection are two significant concerns that must be addressed to ensure an efficient power distribution within the utility grid. When the process to analyze PQD is migrated to real-time platforms, the possible occurrence of a phase mismatch can affect the algorithm’s accuracy; this paper evaluates phase shifting as an additional stage in signal acquisition for detecting and classifying eight types of single power quality disturbances. According to their mathematical models, a set of disturbances was generated using an arbitrary waveform generator BK Precision 4064. The acquisition, detection, and classification stages were embedded into a BeagleBone Black. The detection stage was performed using multiresolution analysis. The feature vectors of the acquired signals were obtained from the combination of Shannon entropy and log-energy entropy. For classification purposes, four types of classifiers were trained: multilayer perceptron, K-nearest neighbors, probabilistic neural network, and decision tree. The results show that incorporating a phase-shifting stage as a preprocessing stage significantly improves the classification accuracy in all cases.

Feature Extraction and Classification of Power Quality Disturbances Using Optimized Tunable-Q Wavelet Transform and Incremental Support Vector Machine

The widespread integration of renewable energy sources (RESs) into power systems using power electronics-based interface devices has led to a substantial rise in power quality (PQ) issues. There is an immediate requirement for effective monitoring, detection, and classification of power quality disturbances (PQDs) that is needed to take remedial measures and design planning of the system architecture. This study presents a hybrid approach with an objective for the feature extraction and classification of PQDs. The proposed hybrid approach is comprised of an optimized tunable-Q wavelet transform (OTQWT) for the feature extraction and incremental support vector machine (ISVM). A four-stage approach is suggested for the PQ detection and classification in this study. In the first stage, the various data are retrieved both in the form of synthetic data by mathematical formulations and real-time data with prototype design setup. In the second stage, regardless of the specified wavelet function, the PQD signals are decomposed into low-pass and high-pass sub-bands using the tunable-Q wavelet transform (TQWT). However, the utilization of default decomposition parameters to address nonstationary PQ signals may lead to information loss and reduced performance of the system. To avoid this limitation, an OTQWT as an enhanced technique to TQWT based on an Adaptive Particle Swarm Optimization (APSO) is suggested. A modified objective function based on the mean square error (MSE) is used to improve the decomposition process. In the third stage, an efficient classifier is suggested based on the ISVM. Lastly, to test and evaluate the performance of the proposed approach, twelve types of PQDs including noise and multiple occurrences are considered. The comparative analysis with other popular methods reflects the better performance of the proposed approach and justifies its use for PQ detection and classification purposes in real-time​ conditions.

Adaptive compound power quality disturbance detection via OMD and improved networks for renewable energy systems

In the evolving landscape of power systems, the integration of various renewable energy resources (RERs) introduces complex challenges, particularly in maintaining power quality, which are paramount for system stability. To address this issue, an adaptive power quality disturbance (PQD) detection framework is implemented in this paper. First, the optimal mode decomposition (OMD) is developed to decompose the compound PQDs into sub-ingredients to make them more visible based on the optimal energy ratio. Subsequently, we propose an improved attention convolutional neural network (IACNN), an advanced neural network architecture that leverages an enhanced attention mechanism to expedite the identification of PQDs. Importantly, the sub-ingredients can be strengthened based on the established PQD detection framework. Finally, a series of experiments are conducted under different noise levels and various types of PQDs. The results demonstrate that the proposed framework has profound detection effectivity with about 99.2% accuracy under the simulation condition of 20 dB noise level. In addition, the experimental verification analysis proves a satisfactory real-time performance. This underscores the potential of the proposed framework as a significant advancement in the realm of power quality management, offering a robust solution to the challenges posed by the integration of RERs into modern power systems.

Real-Time Detection of Power Quality Disturbance Using Fast Fourier Transform and Adaptive Neuro-Fuzzy Inference System

Power quality disturbances cause equipment damage or financial losses. Therefore, the electric power system needs to identify and distinguish any power quality disturbances to reduce problems. This paper proposes hybrid methods combining FFT and ANFIS algorithm for detection of power quality disturbances. There are 11 types of power quality disturbances that can be detected, such as sag, swell, undervoltage, overvoltage, voltage flicker, voltage harmonic, sag + harmonic, swell + harmonic, undervoltage + harmonic, overvoltage + harmonic, and flicker + harmonic. The parameters used to detect disturbances are Vrms, Duration, THDv (Total Harmonic Distortion voltage), and Fluctuation-Count. The detection process starts by sensing voltage and calculating all the parameters, where THDv was obtained by Fast Fourier Transform. All the parameters such as Vrms, Duration, THDv, and Fluctuation-Count are processed by Adaptive Neuro-Fuzzy Inference System, and the result is the type of disturbance. Matlab simulations show that the suggested method performs outstandingly to identify 11 type of Power Quality Disturbances with 99.3% accuracy.

Power quality disturbance detection using histogram of oriented gradients with extreme learning machine

Power quality disturbance detection using histogram of oriented gradients with extreme learning machine

Methodology for the Detection and Classification of Power Quality Disturbances Using CWT and CNN

Energy generation through renewable processes has represented a suitable option for power supply; nevertheless, wind generators and photovoltaic systems can suddenly operate under undesired conditions, leading to power quality problems. In this regard, the development of condition-monitoring strategies applied to the detection of power quality disturbances becomes mandatory to ensure proper working conditions of electrical machinery. Therefore, in this work we propose a diagnosis methodology for detecting power quality disturbances by means of the continuous wavelet transform (CWT) and convolutional neural network (CNN). The novelty of this work lies in the image processing that allows us to precisely highlight the discriminant patterns through spectrograms into 2D images; the images are cropped and reduced to a standard size of 128x128 pixels to retain the most relevant information. Subsequently, the identification of six power quality disturbances is automatically performed by a convolutional neural network. The effectiveness of the proposed method is validated under a set of synthetic data as well as a real data set; the obtained results make the proposal suitable for being incorporated into the monitoring of power quality disturbances in renewable energy systems.

An Intelligent Classification Framework for Complex PQDs Using Optimized KS-Transform and Multiple Fusion CNN

Intelligent classification of multiple power quality disturbances (PQDs) is a top priority in pollution control of the power grid. However, the large-scale application of renewable energy introduces lots of nonlinear and impact loads, which makes the PQDs more complex and challenges the effectiveness of conventional detection frameworks. In this paper, a novel framework based on optimized Kaiser window-based S-transform (OKST) and multiple fusion convolutional neural network (MFCNN) is proposed to identify multiple complex PQDs. First, the OKST is used for the time-frequency positioning of PQDs, where an improved control function is proposed to meet different detection requirements of time-frequency. Additionally, the parameters of the control function are adjusted automatically using maximum energy concentration. Then, the MFCNN based on residual networks (ResNets) is further proposed to extract and classify these time-frequency features automatically. In MFCNN, feature information is fused using different convolution kernels at a 2-dimensional level, which can effectively reduce information loss and improve classification performance. The network model is set up using the Pytorch platform, and the dataset containing 28 types of PQDs and 2 types of nonlinearly mixed PQDs is built to test our framework. The result shows that the proposed OKST-MFCNN obtains an average accuracy of 99.38% under the 20 dB noise level, which is more accurate and robust than some advanced PQDs detection frameworks. Moreover, the accuracy of 97.94% is achieved with satisfactory real-time performance in hardware platform experiments, proving its superior identification performance for complex PQDs.

Power quality disturbance detection method based on optimized kernel extreme learning machine

In order to improve the accuracy of rapid detection of power quality, a power quality disturbance (PQD) classification method based on kernel-based extreme learning machine (KELM) is proposed, and chaos optimization is used to improve the global optimization performance of the particle swarm algorithm. This method first uses KELM to establish a classification model, and then uses an improved chaotic particle swarm optimization (CPSO) to optimize the parameters of KELM. Comparative analysis of example simulation results shows that the algorithm has higher classification accuracy and improves the reliability of power quality disturbance detection.

A Hybrid Signal Processing Method Combining Mathematical Morphology and Walsh Theory for Power Quality Disturbance Detection and Classification

A Hybrid Signal Processing Method Combining Mathematical Morphology and Walsh Theory for Power Quality Disturbance Detection and Classification

Intrusion detection system in a hardware in the loop scenario

Detecting perturbation in electrical signals is crucial to assure power quality (PQ) and protect equipment connected to an electrical network. Some of the information generated by disturbances analysis can be communicated using Internet of Things (IoT) protocols, but it is vital to verify the integrity of the data. As a result of the lack of security presented by IoT devices, the proposal of this work is based on the implementation of an algorithm based on IDS that allows identifying attacks or failures in the security of an IoT-based PQ disturbance detection system implemented in a BeagleBone Black Wireless. The Sparta and Sqlmap programs were used as tools to perform tests and detect security flaws in the BeagleBone, verifying essential operations of the IDS.

Power Quality Disturbance Detection Based on Partitioning-Improved Empirical Wavelet Transform

Power quality is an important indicator to measure the quality of power supply in power grids. With the large evasion accession of new energy sources, its randomness and volatility cause frequent transient power quality problems in power grids. With the large evasion accession of new energy sources, its randomness and volatility cause frequent transient power quality problems in power grids. Aiming at the detection of transient power quality disturbance, this paper proposes the empirical wavelet algorithm which improves the adaptive division. This paper improves the spectrum processing, frequency point selection and frequency band division to improve the adaptive division ability of the algorithm under complex perturbation signals. Combined with the Hilbert transform, a perturbation detection algorithm is proposed based on an improved empirical wavelet algorithm to extract the transient characteristics of the perturbation signal. Through software simulation, this method has good adaptive ability in the face of composite power mass transient disturbance and can accurately extract the transient characteristics of the signal.

Power Quality Disturbances Classification Through Optimal Feature Selective Mechanism

In the Detection and classification of Power Quality Disturbances, feature selection is very important because the more number of features causes more complexity and less number of feature impacts the accuracy. Hence, this paper proposed a new feature selection mechanism called as Flexible Mutual Information based Feature Selection (FMIFS) to represent the Power Quality Disturbances with an effective set of features. FMIFS computes the Mutual Redundancy between PQDs and removes redundant features between them. Once the optimal features are obtained for each PQD, then they are fed to Multi-class Support Vector Machine (MC-SVM) for classification. MC-SVM classifies each PQD based on the feature trained to the system. At experimental analysis, we applied our method on totally 11 types of PQDs for classification and the performance is measured through recall, precision, F1-score, and False Alarm Rate (FAR).

“The Rise of Tech and the Question of Power” A Review on Detection and Classification of Multiple Power Quality Disturbances

“The Rise of Tech and the Question of Power” A Review on Detection and Classification of Multiple Power Quality Disturbances

Power grid monitoring based on Machine Learning and Deep Learning techniques

<p><strong>Background:</strong> In this work, some application examples of machine learning and deep learning techniques in the monitoring of electricity distribution services and infrastructures are proposed. Three different fields of application are considered to highlight the use of techniques based on neural networks: detection and classification of power quality disturbances, monitoring of underground cables in medium voltage lines and diagnosis of joints in high voltage overhead power lines. <strong>Methods:</strong> In the field of power grid monitoring, this work proposes a classification method based on a complex valued neural network to assess working conditions of junction regions in high-voltage overhead lines and insulating materials in medium voltage underground networks. The purpose of this method is to prevent the rupture of joint structures and the abnormal degradation of underground cables via frequency response measurements. This approach allows the direct processing of complex measurements and to reduce the computational effort compared to other methods available in the literature. <strong>Results:</strong> The results obtained in the monitoring of underground cables and joints of high voltage lines guarantee an overall classification rate higher than 90%. In the field of power quality, several deep learning and machine learning methods are proposed to detect the most common voltage disturbances. <strong>Conclusions:</strong> In this paper, an innovative use of widespread algorithms such as convolutional neural networks is proposed with excellent results. Furthermore, the use of a complex-valued neural network in electrical infrastructure monitoring is presented, introducing a minimally invasive classification method that could be instrumental in the transition from corrective to predictive maintenance in the near future.</p>

Utilization of Stockwell Transform and Random Forest Algorithm for Efficient Detection and Classification of Power Quality Disturbances

Power quality disturbances (PQDs) can lead to significant operational and financial losses in power systems. Accurate detection and classification of PQDs are essential for maintaining power quality and preventing power system failures. This research article introduces an innovative approach for the precise detection and classification of single- and multiple-state power quality disturbances (PQDs) using the Stockwell transform (ST) and a random forest classifier. To create realistic PQD signals, seventeen distinct classes are generated in accordance with IEEE Standard 1159, employing mathematical equations implemented in MATLAB software. The ST is employed to extract relevant features from the PQD signals, which are subsequently utilized as input for the random forest classifier. The classifier employs bootstrapping sampling to generate multiple training sets from the original dataset. Each training set is used to construct a decision tree by recursively partitioning the data based on significant features. To mitigate overfitting and enhance robustness, a random subset of features is selected at each node of the decision tree, thereby reducing tree correlation. The performance of the random forest classifier is compared with other widely utilized machine learning classifiers. The results exhibit the efficacy of the proposed approach in accurately detecting and classifying PQ events, highlighting its superiority over alternative methods.

A New Approach to Detect Power Quality Disturbances in Smart Cities Using Scaling-Based Chirplet Transform with Strategically Placed Smart Meters

The growth of Internet of Things (IoT)-enabled devices has increased the amount of data created by the distribution network’s periphery nodes, requiring more data transfer capacity. Recent applications’ real-time requirements have strained standard computing paradigms, and data processing has struggled to keep up. Edge computing is employed in this research to detect distribution network faults, allowing for instant sensing and real-time reaction to the control room for faster investigation of distribution problems and power outages, making the system more reliable. Moreover, to overcome the challenges of fault detection, advanced signal processing methods need to be integrated with the Adaboost classifier. An Adaboost-based edge device, suitable for installation on top of a power pole, is proposed in this research as a means of real-time fault detection. To increase throughput, decrease latency and offload network traffic, data collecting, feature extraction and Adaboost-based problem identification are all performed in an integrated edge node. Enhanced detection accuracy (98.67%) and decreased latency (115.2 ms) verify the effectiveness of the suggested approach. In this research, we enhance the classical chirplets transform to create the scaling-basis chirplet transform (SBCT) for time–frequency (TF) analysis. This approach modulates the TF basis around the relevant time function to modify the chirp rate with frequency and time. By carefully selecting the sampling frequency, it is possible to discriminate between short circuit fault and high-impedance fault (HIF) by calculating spectral entropy. The TF representation obtained with the SBCT provides considerably higher energy concentrations, even for signals with numerous components, closely spaced frequencies and heavy background noise.

Simulation and FPGA Implementation of Transient Power Quality Disturbance Detection

With the access to new energy in the smart grids and the massive use of nonlinear and unbalanced large loads, the problem of power quality becomes more and more serious. At present, the transient power quality disturbance problem has been paid more attention to. The research on transient power quality is relatively late, and various detection methods and technologies are not mature. It is necessary to use more efficient methods to detect and identify transient power quality to improve the safety of electricity use. This paper proposes to detect transient power quality disturbance by wavelet transform. In this paper, the original signal modelling of five kinds of power quality problems such as voltage sag and voltage swell. The 9/7 wavelet lifting coefficient is optimized in this paper and is carried out on the MATLAB software platform to improve the processing speed of the algorithm and realize parallel processing. The simulation results show that the improved lifting wavelet processing can effectively detect the transient power quality disturbance.

The Power Quality Monitoring Method of Intelligent Power Distribution Cabinet

To improve the authenticity of reconstructed signals in power quality disturbance detection, an improved wavelet denoising method based on a coquantum-particle swarm is proposed to solve the problem that parameters in the traditional wavelet function are not easy to obtain, and a power quality disturbance detection framework is constructed. Simulation analysis verifies that the proposed method can effectively improve the disturbance detection performance compared with the traditional method. The reconstructed signal is closer to the original signal, which verifies the effectiveness of the proposed method.

Identification of Power Quality Disturbances in Electrical Systems - A Signal Processing Approach

Abstract: The Detection and Classification of Power Quality Disturbances (PQD) is important for quick diagnosis and mitigation disturbances. Poor power quality could have serious effects on sensitive electric devices. Consumers face difficulty to quantify the cost of failure equipment. There is a need to recognize and mitigate PQD to supply clean power to the consumer. In this Project PQDs simulated with MATLAB R2022b to be validated experimentally on a test bench using stepdown transformer

Power quality disturbance detection based on IEWT

With the continuous development of distributed generation, power quality problems are more complex. In order to ensure that the power quality of the active distribution network meets the requirements of users, it is of great significance to accurately obtain the power quality disturbance parameters. For the problem that the traditional empirical wavelet transform needs to manually select the number of frequency bands when analyzing unknown power quality disturbances, this paper proposes an improved empirical wavelet transform (IEWT) algorithm. The algorithm uses the Piecewise Cubic Hermite Interpolation (PCHIP) method and the improvement of the transition region to achieve adaptive frequency band division and noise interference reduction, and different amplitude (AM) and pitch (FM) components can be obtained. Then the Normalized Direct Quadrature (NDQ) algorithm and Singular Value Decomposition (SVD) algorithm are used to extract frequency, amplitude and time parameters of the AM-FM components. Simulation and experimental results show that the power quality disturbance parameters extracted by the proposed method are more accurate and less affected by noise.