Power Factor Corrected Zeta Converter Research Articles

Evolving Power Factor Correction in Solar Water Pumping Systems through Zeta Converter-Based BLDC Motor Drives

The aim of this paper is to present the design and implementation of a new power conditioning system for a stand-alone solar-powered water pumping system. The system integrates a Brushless DC (BLDC) motor drive with a Power Factor Correction (PFC) Zeta converter to improve energy efficiency and reliability. In order to power BLDC motors for water pumping applications—which are essential for irrigation in isolated locations without access to the grid—the suggested solution attempts to overcome the difficulties related to the direct use of variable solar power. The PFC Zeta converter, which is the system's central component, is made to maximize power extraction from photovoltaic (PV) panels under fluctuating solar irradiation, guarantee high power factor, and reduce harmonic distortion in the electrical grid. A BLDC motor that powers a water pump is efficiently operated by this converter, which also optimizes the DC link voltage. A BLDC motor is especially well-suited for solar-powered applications due to its increased efficiency, dependability, and longer lifespan when compared to traditional induction motors. In order to continuously modify the PV panels' operating point to the maximum power point and maximize the amount of energy they capture, a Maximum Power Point Tracking (MPPT) algorithm is incorporated into the PFC Zeta converter's control strategy. The BLDC motor drive control strategy is carefully designed to guarantee seamless operation and flexibility in response to the fluctuating output from the solar panels, upholding the best possible pumping action in any solar situation. The system's capacity to sustain high efficiency and power factor under a variety of operating circumstances is demonstrated by the experimental findings. When the PFC Zeta converter is used, the solar-powered water pumping system performs much better overall. It shows a notable increase in energy conversion efficiency and lowers total harmonic distortion, which prolongs the pumping system's lifespan. By offering a solid method for raising the effectiveness and dependability of solar-powered water pumping devices, this study advances the sector and holds the possibility of a long-term water supply option for agricultural irrigation in isolated locations. In addition to utilizing renewable solar energy's environmental advantages, the suggested solution tackles the real-world difficulties associated with putting dependable and effective water pumping equipment into off-grid applications.

Power Factor Corrected Zeta Converter Based Improved Power Quality Switched Mode Power Supply

Multiple-output Switched Mode Power Supplies (SMPSs) for personal computers (PCs) normally depict extremely bad power quality indices at the utility interface such as total harmonic distortion of the input current being more than 80%, power factor being lower than 0.5 and output voltage regulation being very poor. They violate the limits of harmonic emissions set by international power quality standards. In this paper, a nonisolated power factor corrected (PFC) converter is being proposed to be used at the front end to improve the power quality of an SMPS for a PC. The front-end converter is able to reduce the 100-Hz ripple in its output that is being fed to the second stage isolated converter. The performance of the front-end Zeta converter is evaluated in three different operating conditions to select the best operating condition for the proposed SMPS system. The performance of the proposed SMPS is simulated and a laboratory prototype is developed to validate its performance. Test results are found to be in line with the simulated performance under varying input voltages and loading conditions and all the results demonstrate its enhanced performance.

A Novel PFC Zeta Converter for SpeedControl of PMBLDC Motor

A novel PFC (Power factor Correction) converter using ZETA DC–DC converter feeding a BLDC (Brush Less DC) motor drive is proposed. A single phase supply followed by an uncontrolled bridge rectifier and a Zeta DC-DC converter is used to control the voltage of a DC link capacitor which is lying between the Zeta converter and a VSI (Voltage Source Inverter). Voltage of a DC link capacitor of Zeta converter is controlled to achieve the speed control of BLDC motor. The proposed PMBLDCM drive is designed and its performance is evaluated in Matlab– Simulink environment and the hardware is implemented on PCB.

Simulation and Experimental Validation of PFC Zeta Converter fed PMSM Drive for Variable speed Applications

In many pulse width modulated DC-DC converter topologies, the controllable switches are operated in switch mode where they are required to turn the entire load current on and off during each switching cycle. Under these conditions, the switches are subjected to high switching stresses and power losses. Recently there is an increased interest in the use of resonant type DC-DC converters due to the advantages of high frequency of operation, high efficiency, small size, light weight, reduced Electro Magnetic Interference (EMI) and low component stresses. A novel PFC (Power Factor Corrected) Converter using Zeta DC-DC converter feeding a PMSM drive using a single voltage sensor is proposed for variable speed applications. A single phase supply followed by an uncontrolled bridge rectifier and a Zeta DC-DC converter is used to control the voltage of a DC link capacitor which is lying between the Zeta converter and a VSI (Voltage Source Inverter). The voltage of a dc-link capacitor of zeta converter is controlled to achieve the speed control of PMSM Drive. The zeta converter is working as a front end converter operating in DICM (Discontinuous Inductor Current Mode) and thus using a voltage follower. A sensor less control of PMSM is used to eliminate the requirement of Hall Effect position sensors. Using MATLAB/ Simulink 7.13 environment the model can be simulated to achieve a wide range of speed control with high power factor and the same can be validated by means of hardware.

Embedded controlled power factor correction zeta converter fed permanent magnet brushless DC motor for mining applications

ABSTRACTDigital simulation and implementation of a power factor correction (PFC) zeta converter based adjustable speed controlled voltage source inverter (VSI) fed permanent magnet brushless DC (PMBLDC) motor for mining application is presented in this paper using low cost embedded controller. The main attractive feature of the zeta converter is that it has a naturally isolated structure, which allows a regulated output voltage with only one power processing stage. The VSI is used as an electronic commutator for the motor. This drive ensures high power factor at the input side. The speed control scheme has the concept of DC-link voltage control proportional to the desired speed of the PMBLDC motor. The speed is regulated by a proportional-integral controller. The proposed PFC zeta converter based PMBLDC motor drive is designed, modelled and simulated using MATLAB/Simulink environment. The results of PFC zeta converter system are compared with the results of VSI-fed PMBLDC drive with L-filter and T-filter at the input side. The power factor is found to have improved using zeta converter. The hardware is implemented using reduced cost embedded controller with zeta converter as PFC converter. Merits of the proposed power converter include improved power factor, less harmonic content and simplified control strategy. The experimental results are compared with the simulation results.