Potentiometric Response Research Articles

Poly(3,4-ethylenedioxythiophene) and Poly(3-octylthiophene-2,5-diyl) Molecules as Composite Transducers in Potentiometric Sensors—Synthesis and Application

The aim of this paper is to investigate the influence of the molecules of conducting polymers on the properties of potentiometric sensors. Two conducting polymers, poly(3-octylthiophene-2,5-diyl) and poly(3,4-ethylene-1,4-dioxythiophene), were compared in the context of the design of ion-selective electrodes. This study offers a comparison of the most popular conducting polymers in the context of the design of potentiometric sensors. Firstly, the properties of both materials, such as their microstructure, electrical performance, wettability, and thermic properties, were examined. Subsequently, conducting polymers were applied as transducer layers in potassium-selective sensors. The properties of both groups of sensors were evaluated using the potentiometry method. Research has shown that the presence of poly(3-octylthiophene-2,5-diyl) (POT) in the transducer layer makes it superhydrophobic, leading to a long lifetime of sensors. On the other hand, the addition of poly(3,4-ethylene-1,4-dioxythiophene) polystyrene sulfonate (PEDOT:PSS) allows for the enhancement of electrical capacitance parameter values, which beneficially influence the stability of the potentiometric response of sensors. Both examined conducting polymers turned out to be perfect materials for transducer layers in potentiometric sensors, each being responsible for enhancing different properties of electrodes.

An Experimentally Designed Sertaconazole Sensor for Selective and Enhanced Potentiometric Response: Determination in Cream, Plasma & in Presence of Other Imidazoles

AbstractA two‐step experimental design was followed to develop a potentiometric solid contact ion‐selective electrode for sertaconazole (STN) determination. A full factorial design was first employed in screening for the best cation exchanger, ionophore and conducting polymer. Amounts of the selected cation exchanger; tetrakis[3,5‐bis(trifluoromethyl)phenyl] borate (TFPB), and ionophore; calix[6]arene (CX6), incorporated in STN sensing membrane were then optimized with the aid of face centered composite design. Calibration slope, detection limit and electrode selectivity in presence of another imidazole‐classified drug; econazole, were the selected responses in both designs. The optimized ion‐sensing membrane, containing 1.0 mg TFPB and 9.9 mg CX6, showed enhanced responses compared to the primarily screened ones. This optimized electrode exhibited a linear response over a concentration range of 1.0×10−6‐−1.0×10−3 M with a Nernstian slope of 57.50 mV/decade. The detection limit was lowered by about one order of magnitude via this optimization to equal 3.16×10−7 M. The proposed electrode was successfully challenged for STN determination in the presence of other imidazoles. It was then used for STN determination in cream and spiked plasma as an example of biological fluid. Our proposed potentiometric method was finally compared to the reported chromatographic ones in terms of sensitivity, and greenness evaluation by the widely applicable Analytical GREEnness (AGREE) tool. The comparison revealed the superiority of our method in terms of sensitivity and sustainability.

Towards mass-production of ion-selective electrodes by spotting: Optimization of membrane composition and real-time tracking of membrane drying

Solid-contact ion-selective electrodes present tools for rapid assessment of charged species within a vast number of samples. Commercially available point-of-care electrochemical sensing systems are most often produced by screen-printing. However, this method is not applicable to polymeric membrane deposition, due to the mismatch of the membrane physical characteristics to those intended for screen printing. Herein, an industrial automated dispensing machine was used for fast and controlled deposition of small volumes of ion-selective membrane. Compared to the previously published literature, the dry solute membrane content was not altered. Rather, we optimized the solvents for the ISM preparation, thus significantly lowering the required overall number of membrane deposition steps. It was shown that dry membrane uniformity strongly depends on the solvent carrier system, with the best uniformity for the membrane prepared in a solvent mixture consisting of equal volumes of THF and cyclohexanone. The volume of a single membrane deposit (spot) was estimated based on colorimetric absorbance measurements to be 0.20 μL. Already with a single spot of the ion-selective membrane, an adequate potentiometric response to potassium ions was obtained, supporting the efficiency of the production technique. Evaporative membrane drying was investigated for the first time using time-resolved impedance spectroscopy, giving useful information on the influence of the solvent composition to the characteristics of the evaporative time profiles. With this approach, the overall production and drying of the described devices takes less than 30 min.

Utilization of azamacrocyclic ionophores as recognition elements for the potentiometric determination of gallic acid in various matrices

Gallic acid is a naturally occurring low molecular weight triphenolic molecule identified as a potent antioxidant, protecting against various types of reactive species and non-radicals. Three novel carbon paste electrodes were developed for the potentiometric determination of gallic acid. Azamacrocyclic ionophors; cyclen, hexacyclen, and kryptofix-22 were utilized as recognition ionophores separately. A multi-walled carbon nanotubes/titanium oxide nanocomposite was employed as the ion-to-electron transducer in the designed sensors. The prepared transducer was characterized by FT-IR and TEM. Molecular docking was implemented to study the recognition mechanism between these ionophores and the gallic acid molecule. It revealed promising binding interactions between gallic acid and the three recognition ionophores, especially hexacyclen and Kryptofix-22. In studying the potentiometric response of the proposed sensors, they exhibited high stability, sensitivity, accuracy, and precision in the quantitation of gallic acid. Gallic acid can be accurately quantified over the linearity range of 1 × 10−1–1 × 10−3 M, 1 × 10−2–1 × 10−6 M, and 1 × 10−2–1 × 10−6 M with a Limit of detection (LOD) 4 × 10−4 M, 3 × 10−7 M, and 7 × 10−7 M, for CPE1, CPE 2 and CPE 3, respectively. The electrodes showed high efficiency in determining gallic acid in Krameria lappacea root alcoholic extract, black tea, green tea, and human plasma without sophisticated pretreatment steps.

Label-Free Detection of Waterborne Pathogens Using an All-Solid-State Laser-Induced Graphene Potentiometric Ion Flux Immunosensor.

Waterborne pathogens are harmful microorganisms transmitted through water sources. Early and rapid pathogen detection is important for preventing illnesses and implementing stringent water safety measures to minimize the risk of contamination. This work introduces a miniaturized all-solid-state potentiometric ion flux immunosensor for the rapid and label-free detection of waterborne pathogens. A screen-printed silver/silver chloride electrode coated with a reference electrode membrane and polyurethane as an all-solid-state reference electrode was combined with a solid-state contact ion-selective electrode (ISE). An all-solid-state ISE was constructed on laser-induced graphene by coating it with a cationic marker and a carboxylated poly(vinyl chloride)-based membrane for immobilizing antibodies and controlling ion fluxes through the membrane. Proof-of-concept was achieved by detecting Escherichia coli and Salmonella enterica serovar Typhimurium using the assembled immunosensors within 10 min. The potentiometric response shift attributed to the blocking effect in the ion flux caused by pathogen-antibody interaction corresponded to pathogen concentration, indicating detection limits of 0.1 CFU/mL and working ranges of 0.1-105 CFU/mL. Furthermore, the developed sensors revealed high selectivity and were directly applied in groundwater and tap water without any sample preparation, demonstrating high recovery percentages. The simple operation and elimination of sample preparation are key benefits to further usability of the developed immunosensors for efficient pathogen detection.

All-Solid-State PVC-Membrane Cu(II)-Selective Potentiometric Microsensor Based on a Novel Calix[4]arene Derivative

In this study, 25,27-dihydroxy-26,28-bis(ethoxycarbonylbutyoxy)-5,11,17,23-p-tert-butylcalix[4]arene was used as an ionophore for the preparation of a novel all-solid-state type microsensor to make a selective potentiometric response towards Cu(II) ions. The optimum membrane composition of the microsensor was determined as 2% (w/w) ionophore, 67% (w/w) bis (2-ethylhexyl) sebacate (DOS), 30% (w/w) polyvinylchloride (PVC), and 1%(w/w) potassium tetrakis 4-chlorophenyl borate (KTpClPB). The Cu(II)-selective microsensor exhibited a highly selective Nernstian response of 31.3±2.1 mV slope (R2: 0.997) with a short response time (15 s) over the concentration range of 10−5 to 10−1 mol L−1 of Cu(II) ions for 8 weeks with no significant difference in potentials. The microsensor was effectively performed in the pH range of 5.0–8.0, with low detection limit as 7.63×10−7 mol L−1, and a temperature range of 15−40 °C. The prepared microsensor was successfully used both as an indicator electrode in the potentiometric titration of Cu(II) ions with EDTA and also in the determination of the Cu(II) content of environmental water samples. When the potentiometric results were compared with ICP-OES, they were found to be in good agreement with ICP-OES results at a 95% confidence level.

Potentiometric determination of the local anesthetic procaine in pharmaceutical samples

In this study, a new potentiometric sensor was developed for the determination of the local anesthetic drug procaine in pharmaceutical samples. Procaine (Pr)–Tetraphenlyborate (TPB) ion–pair was synthesized and used as a sensor material. Potentiometric sensors using the synthesized ion pair (Pr–TPB), poly(vinyl chloride) (PVC) and o–nitrophenyloctyl ether (o–NPOE) in different proportions were prepared and their performance properties were tested. Among the prepared sensors, the best potentiometric response characteristics were obtained with the sensor composition Pr–TPB:PVC:o–NPOE in the ratio of 6.0:32.0:62.0 (w/w %). The new procaine sensor developed in the present study had a near–Nernstian behavior of 54.1 ± 3.3 mV/per decade and a low detection limit of 3.18 × 10−5 mol L−1 in the concentration range of 1.0 × 10−1–1.0 × 10−4 mol L−1. Additionally, the sensor had a response time of less than 10 s and could work in a wide pH range for two different concentration values without being affected by pH changes. Finally, the new procaine potentiometric sensor was used to detect procaine in injection samples and successfully determined procaine concentrations with high recoveries.

Membrane-electrode junction properties for optimum potentiometric hydrogen sensor response

Membrane-electrode junction properties for optimum potentiometric hydrogen sensor response

Highly selective and sensitive potentiometric determination of favipiravir in COVID-19 antiviral drug formulations

In this study, a novel all-solid-state electrochemical sensor based on favipiravir-tetraphenylborate (FAV-TPB) electroactive material was developed and reported for FAV’s highly selective and sensitive potentiometric determination in COVID-19 antiviral drug formulations. All-solid-state FAV selective sensor was fabricated by mixing and properly pressing FAV-TPB, graphite (G), multi-walled carbon nanotube (MWCNT), and paraffin oil (PO). In order to obtain the best sensor response, the sensor component ratios were optimized. The most satisfying response characteristics was obtained with the sensor composition FAV-TPB:G:MWCNT:PO in the ratio 32.5:42.5:5:20 (w/w %). The developed sensor displayed a wide linear near-Nernstian response to FAV over the concentration of 1.0 × 10−6 − 1.0 × 10−1 molL−1 with a slope of 53.6 ± 1.4 mV (R2 = 0.9997). The detection limits of the sensor was calculated as 6.0 × 10−7 molL−1, respectively. The dynamic response time of the sensor was 7 s, and the sensor exhibited fairly reproducible potentiometric responses. In the pH range of 6.0–8.0, the sensor’s potential response was not affected by the pH change of the test solutions. The improved sensor had a wide temperature tolerance, and its response remained unchanged in the 10–40 ℃ temperature range. The interference effect of some chemical and biological species was evaluated by the matched potential method and separate solution method. The sensor worked stable for 12 weeks without any considerable change in its potential response. The analytical applications of the sensor were successfully carried out with the potentiometric titration of FAV with sodium tetraphenylborate solution and also the direct determination of favipiravir in COVID-19 antiviral drug formulations.

Efficient Taste Analysis via Single-Channel Hybrid Electronic Tongue

The prospective applications of electronic tongues (e-tongues) in the food, water, beverage, and pharmaceutical industries have long been hampered by the inconvenient nature of series measurements using expensive and specialised sensor arrays. A cost-efficeint and easier solution to this problem arises in the shape of a single-channel hybrid e-tongue, presenting a novel approach to overcoming restrictions. This progress uses data fusion from potentiometry and impedimetry to combine these measures into a single channel made up of unfunctionalized metal electrodes supported by a pH electrode.The hybrid e-tongue combines potentiometric response, which includes pH and open circuit potential, with impedimetric response, which takes into account comparable electric circuit parameters such as charge transfer resistance and double-layer capacitance. The taste discriminability of this low-cost single-channel hybrid e-tongue is validated using two metal electrodes, Pt and Ni, and two separate sample preparations of basic taste analytes, each at concentrations around the human tongue threshold.Principal component analysis (PCA) plots are used to test qualitative discrimination by reducing dimensionality and clustering analytes. Silhouette coefficients (SC) and hierarchical cluster analysis are used to assess clustering quality. Even without particular sample preparation, the Pt and Ni electrodes exhibit substantial clustering with SC values of 0.83 and 0.74, respectively. This significant outcome highlights the efficacy of the hybrid e-tongue in improving taste discriminability.Comparisons with potentiometric and impedimetric measurements performed independently show that the hybrid e-tongue, assisted by data fusion at a single channel, improves accuracy and clustering significantly. This finding not only speeds up the analysis process, but it also improves the overall effectiveness of taste discrimination.Correlations between taste analytes and physicochemical factors are formed using heatmap plots and PCA loading plots to provide a fuller knowledge of the hybrid e-tongue's mechanics. These visualisations provide vital insights into the complex interplay of several physicochemical processes, offering insight into the mechanism underlying the hybrid e-tongue's excellent performance.discrimination.Despite its remarkable capabilities, the study acknowledges that taste discriminability diminishes due to the buffer activity of the standard reference solution used for sample preparation. This recognition prompts further exploration and optimization of the solution to ensure the broad applicability of the hybrid e-tongue across various scenarios.In conclusion, the reported single-channel hybrid e-tongue represents a significant advancement in taste analysis technology. By addressing the challenges associated with series measurements on complex sensor arrays, this innovation opens new avenues for commercial e-tongues in diverse industries. The amalgamation of potentiometry and impedimetry in a single channel not only enhances accuracy and clustering but also provides valuable mechanistic insights. As the research community continues to refine and optimize this technology, the future holds great promise for the widespread adoption of single-channel hybrid e-tongues in analytical applications, advancing how we perceive and understand taste.

Super-Nernstian potentiometric response of InN/InGaN quantum dots by fractional electron transfer

The potentiometric response of InN/InGaN quantum dots (QDs) on Si (111) is experimentally studied and modeled as a function of the In content and morphology of the InGaN layer below the QDs due to the changing N flux in stationary plasma-assisted molecular beam epitaxy. For isolated core–shell InGaN nanowires formed for N-rich growth, sub-Nernstian response with Cl− anions as the test analyte is observed. For compact columnar InGaN layers formed in a very narrow range of N flux at the N-rich to metal-rich growth transition, a maximum super-Nernstian response of 100 mV/decade is achieved, provided the In content is high. With reducing N flux and In content, low super-Nernstian response and finally sub-Nernstian response are re-established for compact planar GaN layers. The maximum super-Nernstian response and the transition to sub-Nernstian response are quantitatively modeled by the quantum partition of electrons inside and outside of the QDs and consequent fractional electron transfer in the artificial chemical reaction of the QDs with the anions.

Ion-Selective Electrode for Nitrates Based on a Black PCV Membrane.

Carbon nanomaterials were introduced into this research as modifiers for polymeric membranes for single-piece electrodes, and their properties were studied for the case of nitrate-selective sensors. The use of graphene, carbon black and carbon nanotubes is shown to significantly improve the potentiometric response, while no redox response was observed. The use of carbon nanomaterials results in a near-Nernstian response (54 mV/pNO3-) towards nitrate ions over a wide linear range (from 10-1 to 10-6 M NO3-). The results obtained by chronopotentiometry and electrochemical impedance spectroscopy reveal little resistance, and the capacitance parameter is as high as 0.9 mF (for graphene-based sensor). The high electrical capacity of electrodes results in the good stability of the potentiometric response and a low potential drift (0.065 mV/h). Introducing carbon nanomaterials into the polymetric membrane, instead of using them as separate layers, allows for the simplification of the sensors' preparation procedure. With single-piece electrodes, one step of the procedure could be omitted, in comparison to the procedure for the preparation of solid-contact electrodes.

PdRuO2/PVP nanomaterial as a highly selective, stable, and applicable potentiometric sensor for the detection of Cr3+

PdRuO2/PVP nanomaterial was synthesized using a straightforward method and characterized using advanced analytical methods such as TEM, XRD, XPS, elemental mapping and SEM. The synthesized PdRuO2/PVP nanomaterial was used as an ionophore in potentiometric sensor electrodes and successfully adapted to Cr3+ ion detection in a large number of aqueous samples. Several experimental parameters of the PdRuO2/PVP sensor such as potentiometric behavior, selectivity, repeatability, response time, pH, titration, and recovery in real samples were investigated. Potentiometric behavioral characteristics were performed in the concentration range 1 × 10−6–1.0 × 10−1 M. The repeated experiments performed six times showed that there was no deviation in the measurements. The limit of detection of the PdRuO2/PVP potentiometric sensor was very low with a value of 8.6 × 10−8 M. The potentiometric measurements showed that the synthesized PdRuO2/PVP ionophore was highly effective in detecting Cr3+ in a wide pH range of 2.0–8.0 and was found to have a shelf life of over 1 year. As a result, the synthesized PdRuO2/PVP electrode material was found to be highly selective, stable, and applicable for Cr3+ detection.Graphical

Design and optimization of a Cr(VI)-Selective Electrode based on a polymeric ß-cyclodextrin membrane modified with sulfur donor groups

This work presents the design and optimization of a new Cr(VI)-selective electrode. The new sensor is based on modifying a glassy carbon electrode with carbon quantum dots, ß-cyclodextrin, and carbon disulfide. The carbon quantum dots aided the electrical properties of the glassy carbon by improving charge transfer; the electropolymerization of ß-cyclodextrin resulted in a polymeric membrane that functions as a recognition element when modified by adding sulfur donor groups to its structure. Modifying the membrane with sulfur atoms gave the sensor excellent selectivity toward Cr(VI) ions. The electrode synthesis was optimized using a 23 factorial design; the factors studied were pH, the number of cycles in the electropolymerization, and the presence or absence of carbon nanoparticles. Eight different electrodes were constructed, and their potentiometric response to different concentrations of Cr(VI) was evaluated for all of them. The analysis of variance of the experimental design found no significant effect of any factor on the response. However, it suggests a strong interaction between the three factors studied. The sensor that presented the best analytical parameters was synthesized at pH 5 and 50 consecutive cycles in the presence of carbon quantum dots. This new electrode, with its response times of 40 s at different concentrations of the metal ion, exhibiting a slope of (66.0 ± 2.1) mV decade−1 and a detection limit of (5.2 ± 0.1)x10−7 mol L−1, can be used at pH between 0 and 3 without the effect of hydronium ions. The proposed electrode has good reproducibility and excellent selectivity against various metal ions and has significant advantages over other analysis methods. Its cost, ease of construction, easy handling, ease of operation, ease of storage and transportation, as well as good performance, short response time, and high selectivity make this electrode a valuable tool for easy, fast, and reliable monitoring of Cr(VI) in water samples, contributing to the safety and health of our environment.

Novel Green Screen-Printed Potentiometric Sensor for Monitoring Antihistamine Drug Chlorphenoxamine HCl in Various Matrices

The pharmaceutical sector is seeking cost-effective analyzers that deliver precise, real-time data. This study aims to establish a correlation between the pharmaceutical industry and advancements in solid-contact ion-selective electrodes for quantifying chlorphenoxamine hydrochloride (CPX) concentration in various matrices. A comparative analysis of the performance between solid contact and liquid contact sensors showed that solid contact sensors outperformed their liquid contact counterparts in terms of durability, handling, and ease of integration. A sensor was developed using MWCNT and calix[8]arene as ionophore, resulting in a Nernstian potentiometric response for CPX across a linear range of 5.0 × 10−5 to 1.0 × 10−8 M. The slope of the response was 57.89 ± 0.77 mV/decade, and the standard potential was determined to be 371.9 ± 0.8 mV. The developed sensor exhibits notable intrinsic advantages, such as a rapid response time of 12 ± 2 s and an extended lifespan of 3 months. The sensor exhibiting optimal performance has been effectively employed for the analysis of CPX in different matrices, including pharmaceutical formulations, urine, and plasma. The developed method underwent validation in compliance with ICH requirements. Finally, the method’s greenness and whiteness were evaluated using five different tools and successfully compared to those obtained from the established reported method.

A Comprehensive Review Of Potentiometric Biosensors

Potentiometry based on ion-selective electrodes (ISEs) has undergone a renaissance with improvements in the detection limits and selectivities of ISEs, the introduction of new materials, new sensing concepts (from conventional potentiometry to dynamic electrochemistry approaches), and deeper theoretical understanding and modelling of the potentiometric responses of ISEs. The most recent innovations support improvements in software for ion sensing and biosensing. Additionally, adaptable sensing techniques have been created for a wide range of various target molecules, including enzymes, antibodies, aptamers, and peptides, in response to the introduction of new receptors by using ISEs as powerful transducers. Current potentiometric biosensor trends are examined in this paper. Their applications in the biosensing of metal ions, small molecules, DNA, proteins, microorganisms, and poisons have been discussed. This review provides a forecast for potentiometric biosensing based on the integration of potentiometric ISEs with innovative materials and cutting-edge techniques.

Improvement of the Upper Detection Limit of Ionophore-Based H+-Selective Electrodes: Explanation and Elimination of Apparently Super-Nernstian Responses.

The response range of an ion-selective electrode (ISE) has been described by counterion interference at the lower and Donnan failure at the upper detection limit. This approach fails when the potentiometric response at the upper detection limit exhibits an apparently super-Nernstian response, as has been reported repeatedly for H+-selective electrodes. While also observed when samples contain other anions, super-Nernstian responses at low pH are a problem in particular for samples that contain phthalate, a common component of commercial pH calibration solutions. This work shows that coextraction of H+ and a sample anion into the sensing membrane alone does not explain these super-Nernstian responses, even when membrane-internal diffusion potentials are taken into account. Instead, these super-Nernstian responses are explained by the formation of complexes between that anion and at least two protonated ionophore molecules. As demonstrated by experiments and explained with quantitative phase boundary models, the apparently super-Nernstian responses at low pH can be eliminated by restricting the molecular ratio of ionophore and ionic sites. Notably, this conclusion results in recommendations for the optimization of sensing membranes that, in some instances, will conflict with previously reported recommendations from the ionic site theory for the optimization of the lower detection limit. This mechanistic insight is key to maximizing the response range of these ionophore-based ISEs.

Peculiarities of the potentiometric response of ISEs with membranes containing two neutral ionophores and an excess of ion-exchanger: Experiment and modeling

The potentiometric response of ion-selective electrodes (ISEs) with membranes simultaneously containing two ionophores: valinomycin and lithium ionophore Li VIII, as well as the cation exchanger potassium tetrakis(p-Cl-phenyl) borate in different concentrations is studied in KCl, LiCl and KCl + LiCl solutions. It is shown that ISEs with a membrane containing an excess of ionophores over the ion-exchanger provide Nernstian response to K+ and to Li+ ions. However, membranes with an excess of the ion-exchanger over valinomycin show Nernstian response to K+ only in mixed KCl + LiCl solutions with constant ratios of the concentrations of these electrolytes. On the contrary, the response to Li+ is obtained both in mixed and pure LiCl solutions. The results are semi-quantitatively explained using a simple mathematical model and respective computer simulation.

Real-Time Potentiometric Monitoring of Tetrachloroaurate(III) with an Ion-Selective Electrode and Its Applications to HAuCl4 Iodide-Catalyzed Reduction by Hydroxylamine

Ion-selective electrodes for tetrachloroaurate(III) have been developed for potentiometric monitoring of the reduction reaction of tetrachloroaurate(III). Three different plasticized polyvinyl chloride membranes containing tridodecymethylammonium chloride as an anion exchanger were investigated. These membranes differ in the plasticizer used, either 2-nitrophenyl octyl ether (NPOE) or tricresyl phosphate (TCP) or bis-(2-ethylhexyl) sebacate (DOS). The potentiometric response of the electrodes to the tetrachloroaurate(III) concentration was studied by two methods. In the first method, commonly used in the calibration of ion-selective electrodes, successive tetrachloroaurate(III) concentration increments were used and the potential was allowed to stabilize after each concentration step. The second method was developed to mimic the tetrachloroaurate(III) reduction reaction in which there is a continuous decrease in the concentration of tetrachloroaurate(III). This was achieved by continuously diluting an initial concentration of tetrachloroaurate(III) by pumping a diluent solution while keeping the sample volume constant. This method gave an excellent linear response to the tetrachloroaurate(III) concentration. The calibrated electrodes were used for the potentiometric monitoring of the kinetics of a newly observed reaction: the reduction of tetrachloroaurate(III) by hydroxylamine catalyzed by iodide. A mechanism for this reaction is proposed on the basis of the experimental results obtained.

Chronopotentiometric sensors for antimicrobial peptide-based biosensing of Staphylococcus aureus.

Charged antimicrobial peptides can be used for direct potentiometric biosensing, but have never been explored. We report here a galvanostatically-controlled potentiometric sensor for antimicrobial peptide-based biosensing. Solid-state pulsed galvanostatic sensors that showed excellent stability under continuous galvanostatic polarization were prepared by utilizing reduced graphene oxide/poly (3,4-ethylenedioxythiophene): poly (4-styrenesulfonate) (rGO/PEDOT: PSS) as a solid contact. More importantly, the chronopotentiometric sensor can be made sensitive to antimicrobial peptides with intrinsic charge on demand via a current pulse. In this study, a positively charged antimicrobial peptide that can bind to Staphylococcus aureus with high affinity and good selectivity was designed as a model. Two arginine residues with positive charges were linked to the C-terminal of the peptide sequence to increase its potentiometric responses on the electrode. The bacteria binding-induced charge or charge density change of the antimicrobial peptide enables the direct chronopotentiometric detection of the target. Under the optimized conditions, the concentration of Staphylococcus aureus can be determined in the linear range 10-1.0×105 CFU mL-1 with a detection limit of 10 CFU mL-1. It is anticipated that such a chronopotentiometric sensing platform is readily adaptable to detect other bacteria by choosing the peptides.